--- /dev/null
+/*
+ * Copyright (c) 2009 Communication Group and Eislab at
+ * Lulea University of Technology
+ *
+ * Contact: Laurynas Riliskis, LTU
+ * Mail: laurynas.riliskis@ltu.se
+ * All rights reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Communication Group at Lulea University of Technology
+ * nor the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
+ * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * Interface for the RV-8564-C2 real time clock.
+ *
+ * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
+ */
+interface HplRV8564
+{
+ /**
+ * Enables/disables the interrupts generated by the RV8564 chip.
+ */
+ command void enableInterrupt();
+ command void disableInterrupt();
+
+ /**
+ * Enables/disable CLKOUT from the RTC.
+ */
+ command void enableCLKOUT();
+ command void disableCLKOUT();
+
+ /**
+ * Reads from a register.
+ *
+ * @param reg The register to be read.
+ * @return The value of the register.
+ */
+ command error_t readRegister(uint8_t reg);
+
+ /**
+ * Writes to a register.
+ *
+ * @param reg The register that is written to.
+ * @param value The value that is written to the register.
+ */
+ command error_t writeRegister(uint8_t reg, uint8_t value);
+
+ /**
+ * Signals when a register read finished.
+ *
+ * @param val The value read from the register.
+ * @param reg The register the value was read from.
+ */
+ async event void readRegisterDone(error_t error, uint8_t reg, uint8_t val);
+
+ /**
+ * Signals when a register write finished.
+ *
+ * @param reg The register the value was written to.
+ */
+ async event void writeRegisterDone(error_t error, uint8_t reg);
+
+ /**
+ * Signal when an interrupt occurs.
+ */
+ async event void fired();
+}
--- /dev/null
+/*
+ * Copyright (c) 2009 Communication Group and Eislab at
+ * Lulea University of Technology
+ *
+ * Contact: Laurynas Riliskis, LTU
+ * Mail: laurynas.riliskis@ltu.se
+ * All rights reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Communication Group at Lulea University of Technology
+ * nor the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
+ * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * Configuration of the RV-8564 Real-time Clock on the Mulle platform.
+ *
+ * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
+ */
+
+configuration HplRV8564C
+{
+ provides interface HplRV8564;
+}
+implementation
+{
+ components HplRV8564P as RTCP,
+ new SoftwareI2C2C() as I2C,
+ HplM16c62pGeneralIOC as IOs,
+ HplM16c62pInterruptC as Irqs,
+ new M16c62pInterruptC() as Irq;
+
+ Irq.HplM16c62pInterrupt -> Irqs.Int0;
+
+ HplRV8564 = RTCP;
+ RTCP.CLKOE -> IOs.PortP47;
+ RTCP.CLKOUT -> IOs.PortP92;
+ RTCP.GpioInterrupt -> Irq;
+ RTCP.I2C -> I2C;
+ RTCP.I2CResource -> I2C;
+
+ components PlatformC;
+ PlatformC.SubInit -> RTCP.Init;
+}
--- /dev/null
+/*
+ * Copyright (c) 2009 Communication Group and Eislab at
+ * Lulea University of Technology
+ *
+ * Contact: Laurynas Riliskis, LTU
+ * Mail: laurynas.riliskis@ltu.se
+ * All rights reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Communication Group at Lulea University of Technology
+ * nor the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
+ * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * Implementation of the RV-8564-C2 real time clock.
+ *
+ * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
+ */
+
+#include "rv8564.h"
+#include "I2C.h"
+module HplRV8564P
+{
+ provides interface HplRV8564 as RTC;
+ provides interface Init;
+
+ uses interface GeneralIO as CLKOE;
+ uses interface GeneralIO as CLKOUT;
+ uses interface GeneralIO;
+ uses interface GpioInterrupt;
+ uses interface I2CPacket<TI2CBasicAddr> as I2C;
+ uses interface Resource as I2CResource;
+}
+implementation
+{
+
+ enum
+ {
+ S_IDLE,
+ S_READING,
+ S_WRITING
+ };
+ norace uint8_t m_state = S_IDLE;
+ uint8_t m_buf[2];
+
+ command error_t Init.init()
+ {
+ call CLKOUT.makeInput();
+ call CLKOE.clr();
+ call CLKOE.makeOutput();
+ }
+
+ command void RTC.enableCLKOUT()
+ {
+ call CLKOE.set();
+ }
+
+ command void RTC.disableCLKOUT()
+ {
+ call CLKOE.clr();
+ }
+
+ command void RTC.enableInterrupt()
+ {
+ call GpioInterrupt.enableFallingEdge();
+ }
+
+ command void RTC.disableInterrupt()
+ {
+ call GpioInterrupt.disable();
+ }
+
+ command error_t RTC.readRegister(uint8_t reg)
+ {
+ if (m_state != S_IDLE)
+ {
+ return EBUSY;
+ }
+ m_state = S_READING;
+ m_buf[0] = reg;
+ if (call I2CResource.request() == SUCCESS)
+ {
+ return SUCCESS;
+ }
+ else
+ {
+ m_state = S_IDLE;
+ return FAIL;
+ }
+ return SUCCESS;
+ }
+
+ command error_t RTC.writeRegister(uint8_t reg, uint8_t value)
+ {
+ if (m_state != S_IDLE)
+ {
+ return FAIL;
+ }
+ m_state = S_WRITING;
+ atomic m_buf[0] = reg;
+ atomic m_buf[1] = value;
+ if (call I2CResource.request() == SUCCESS)
+ {
+ return SUCCESS;
+ }
+ else
+ {
+ m_state = S_IDLE;
+ return FAIL;
+ }
+ }
+
+ event void I2CResource.granted()
+ {
+ atomic
+ {
+ if (m_state == S_READING)
+ {
+ call I2C.write(I2C_START | I2C_STOP, RV8564_ADDR, 1, m_buf);
+ }
+ else if (m_state == S_WRITING)
+ {
+ call I2C.write(I2C_START | I2C_STOP, RV8564_ADDR, 2, m_buf);
+ }
+ }
+ }
+
+ async event void GpioInterrupt.fired()
+ {
+ signal RTC.fired();
+ }
+
+ async event void I2C.readDone(error_t error, uint16_t addr, uint8_t length, uint8_t* data)
+ {
+ atomic
+ {
+ if (m_state == S_READING && data == m_buf)
+ {
+ call I2CResource.release();
+ m_state = S_IDLE;
+ signal RTC.readRegisterDone(error, m_buf[0], m_buf[1]);
+ }
+ }
+ }
+
+ async event void I2C.writeDone(error_t error, uint16_t addr, uint8_t length, uint8_t* data)
+ {
+ if (m_state == S_READING)
+ {
+ if (error != SUCCESS)
+ {
+ call I2CResource.release();
+ m_state = S_IDLE;
+ signal RTC.readRegisterDone(error, m_buf[0], 0);
+ return;
+ }
+ else
+ {
+ call I2C.read(I2C_START | I2C_STOP, RV8564_ADDR, 1, m_buf + 1);
+ }
+ }
+ else if (m_state == S_WRITING)
+ {
+ call I2CResource.release();
+ m_state = S_IDLE;
+ signal RTC.writeRegisterDone(error, m_buf[0]);
+ }
+ }
+}
+++ /dev/null
-/*
- * Copyright (c) 2009 Communication Group and Eislab at
- * Lulea University of Technology
- *
- * Contact: Laurynas Riliskis, LTU
- * Mail: laurynas.riliskis@ltu.se
- * All rights reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- * - Neither the name of Communication Group at Lulea University of Technology
- * nor the names of its contributors may be used to endorse or promote
- * products derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
- * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * Interface for the RV-8564-C2 real time clock.
- *
- * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
- */
-interface RV8564
-{
- /**
- * Turns the chip on.
- */
- command error_t on();
-
- /**
- * Turns the chip off.
- */
- command error_t off();
-
- /**
- * Checks if the chip is on.
- *
- * @return true if on.
- */
- command bool isOn();
-
- /**
- * Enables/disables the interrupts generated by the CLKOUT.
- */
- // TODO(henrik) This needs to be changed because there are different type of
- // interrupts generated by the chip.
- command void enableInterrupt();
- command void disableInterrupt();
-
- /**
- * Reads from a register.
- *
- * @param reg The register to be read.
- * @return The value of the register.
- */
- command error_t readRegister(uint8_t reg);
-
- /**
- * Writes to a register.
- *
- * @param reg The register that is written to.
- * @param value The value that is written to the register.
- */
- command error_t writeRegister(uint8_t reg, uint8_t value);
-
- /**
- * Signals when a register read finished.
- *
- * @param val The value read from the register.
- * @param reg The register the value was read from.
- */
- async event void readRegisterDone(uint8_t val, uint8_t reg);
-
- /**
- * Signals when a register write finished.
- *
- * @param reg The register the value was written to.
- */
- async event void writeRegisterDone(uint8_t reg);
-
- /**
- * Signal when an interrupt occurs.
- */
- async event void fired();
-
- /**
- * Enables CLKOUT from the RTC.
- */
- command void enableCLKOUT();
-}
+++ /dev/null
-/*
- * Copyright (c) 2009 Communication Group and Eislab at
- * Lulea University of Technology
- *
- * Contact: Laurynas Riliskis, LTU
- * Mail: laurynas.riliskis@ltu.se
- * All rights reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- * - Neither the name of Communication Group at Lulea University of Technology
- * nor the names of its contributors may be used to endorse or promote
- * products derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
- * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * Configuration of the RV-8564 Real-time Clock on the Mulle platform.
- *
- * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
- */
-
-configuration RV8564C
-{
- provides interface RV8564 as RTC;
-}
-implementation
-{
- components RV8564P as RTCP,
- new SoftwareI2C2C() as I2C,
- HplM16c62pGeneralIOC as IOs,
- HplM16c62pInterruptC as Irqs,
- new M16c62pInterruptC() as Irq;
-
- Irq.HplM16c62pInterrupt -> Irqs.Int0;
-
- RTC = RTCP;
- RTCP.CLKOE -> IOs.PortP47;
- RTCP.CLKOUT -> IOs.PortP92;
- RTCP.GpioInterrupt -> Irq;
- RTCP.I2C -> I2C;
- RTCP.I2CResource -> I2C;
-}
+++ /dev/null
-/*
- * Copyright (c) 2009 Communication Group and Eislab at
- * Lulea University of Technology
- *
- * Contact: Laurynas Riliskis, LTU
- * Mail: laurynas.riliskis@ltu.se
- * All rights reserved.
- *
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- * notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- * notice, this list of conditions and the following disclaimer in the
- * documentation and/or other materials provided with the
- * distribution.
- * - Neither the name of Communication Group at Lulea University of Technology
- * nor the names of its contributors may be used to endorse or promote
- * products derived from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
- * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * Implementation of the RV-8564-C2 real time clock.
- *
- * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
- */
-
-#include "rv8564.h"
-#include "I2C.h"
-module RV8564P
-{
- provides interface RV8564 as RTC;
- // TODO(henrik) Exactly how is the RTC connected to mulle, what is the functionallity of GeneralIO?
- // Maybe there is only a init needed because the chip is always on?
- uses interface GeneralIO as CLKOE;
- uses interface GeneralIO as CLKOUT;
- uses interface GeneralIO;
- uses interface GpioInterrupt;
- uses interface I2CPacket<TI2CBasicAddr> as I2C;
- uses interface Resource as I2CResource;
-}
-implementation
-{
-
- enum
- {
- OFF,
- IDLE,
- READING,
- WRITING
- };
- norace uint8_t state = OFF;
- norace uint8_t read_register;
- uint8_t read_register_value;
- uint8_t write_buffer[2];
-
- command error_t RTC.on()
- {
- if (state != OFF)
- {
- return SUCCESS;
- }
- state = IDLE;
- return SUCCESS;
- }
-
- command error_t RTC.off()
- {
- if (state == OFF)
- {
- return SUCCESS;
- }
- else if (state != IDLE)
- {
- return FAIL;
- }
- call CLKOE.clr();
- call CLKOUT.clr();
- return SUCCESS;
- }
-
- command bool RTC.isOn()
- {
- return ((state != OFF) ? true : false);
- }
-
- command void RTC.enableCLKOUT()
- {
- call CLKOUT.makeInput();
- call CLKOUT.clr();
- call CLKOE.makeOutput();
- call CLKOE.set();
- }
- command void RTC.enableInterrupt()
- {
- call GpioInterrupt.enableFallingEdge();
- }
-
- command void RTC.disableInterrupt()
- {
- call GpioInterrupt.disable();
- }
-
- command error_t RTC.readRegister(uint8_t reg)
- {
- uint8_t val;
- if (state != IDLE)
- {
- return FAIL;
- }
- state = READING;
- read_register = reg;
- call I2CResource.request();
- return SUCCESS;
- }
-
- command error_t RTC.writeRegister(uint8_t reg, uint8_t value)
- {
- if (state != IDLE)
- {
- return FAIL;
- }
- state = WRITING;
- atomic write_buffer[0] = reg;
- atomic write_buffer[1] = value;
- call I2CResource.request();
- return SUCCESS;
- }
-
- event void I2CResource.granted()
- {
- atomic {
- if (state == READING)
- {
- call I2C.write(I2C_START | I2C_STOP, RV8564_ADDR, 1, &read_register);
- }
- else if (state == WRITING)
- {
- call I2C.write(I2C_START | I2C_STOP, RV8564_ADDR, 2, write_buffer);
- }
- }
- }
-
- async event void GpioInterrupt.fired()
- {
- signal RTC.fired();
- }
-
- async event void I2C.readDone(error_t error, uint16_t addr, uint8_t length, uint8_t* data)
- {
- atomic
- {
- if (state == READING && data == &read_register_value)
- {
- state = IDLE;
- call I2CResource.release();
- signal RTC.readRegisterDone(read_register_value, read_register);
- }
- }
- }
-
- async event void I2C.writeDone(error_t error, uint16_t addr, uint8_t length, uint8_t* data)
- {
- if (state == READING)
- {
- call I2C.read(I2C_START | I2C_STOP, RV8564_ADDR, 1, &read_register_value);
- }
- else if (state == WRITING)
- {
- state = IDLE;
- call I2CResource.release();
- signal RTC.writeRegisterDone(write_buffer[0]);
- }
- }
-
- default async event void RTC.readRegisterDone(uint8_t val, uint8_t reg) {}
- default async event void RTC.writeRegisterDone(uint8_t reg) {}
- default async event void RTC.fired() { }
-}