my $hnlistFile = "/etc/backuppc/".basename($0).".hnlist";
my $velistFile = $ENV{HOME}."/log/".basename($0).".velist";
+# Uncomment one of the following
+my $dbgf;
+open $dbgf, ">>/tmp/BackupPC_ovz.debug" || die "Cannot open debug file";
+#open $dbgf, ">>/dev/null" || die "Cannot open debug file";
+
+sub mydie($)
+{
+ my ($text) = @_;
+
+ print $dbgf ": die $text\n";
+ die $text;
+}
+
sub cmdExecOrEval
{
my($cmd, @args) = @_;
# Write the VEs on all HNs to a config file on the BackupPC server for
# later use.
my @HNS = ();
- open my $cfg, "<$hnlistFile" || die "Cannot read $hnlistFile";
+ open my $cfg, "<$hnlistFile" || mydie "Cannot read $hnlistFile";
while (<$cfg>) {
chomp;
push(@HNS, split(' ')) if (! /^#/);
}
close($cfg);
- die "No HNs defined in $hnlistFile" if ($#HNS < 0);
+ mydie "No HNs defined in $hnlistFile" if ($#HNS < 0);
- open my $out, ">$velistFile" || die "Cannot write to $velistFile";
+ open my $out, ">$velistFile" || mydie "Cannot write to $velistFile";
foreach my $hn (@HNS) {
open my $fh, "ssh -l root $hn vzlist -a |" ||
- die "Can run remote vzlist command";
+ mydie "Can run remote vzlist command";
while (<$fh>) {
chomp;
my ($veid, $junk, $running, $junk, $hostname) = split(' ');
sub loadVeList()
{
open my $fh, "<$velistFile" ||
- die "Cannot read from $velistFile. Set a preuser script.";
+ mydie "Cannot read from $velistFile. Set a preuser script.";
while (<$fh>) {
chomp;
sub localVe($)
{
my ($veid) = @_;
- die "HN: no veid" if (!defined($veid));
+ mydie "HN: no veid" if (!defined($veid));
my $vzdir = '/etc/vz';
- die "HN is not running OpenVZ" if (!defined($vzdir));
+ mydie "HN is not running OpenVZ" if (!defined($vzdir));
my $lockdir = undef;
my $dumpdir = undef;
my $private = undef;
my $root = undef;
- open my $fh, "<$vzdir/vz.conf" || die "Cannot open $vzdir/vz.conf";
+ open my $fh, "<$vzdir/vz.conf" || mydie "Cannot open $vzdir/vz.conf";
while (<$fh>) {
chomp;
my ($name, $value) = split('=');
if ($name eq 'LOCKDIR') {
$lockdir = $value;
- die "OpenVZ LOCKDIR ($lockdir) is invalid" if (! -d $lockdir);
+ mydie "OpenVZ LOCKDIR ($lockdir) is invalid" if (! -d $lockdir);
} elsif ($name eq 'DUMPDIR') {
$dumpdir = $value;
- die "OpenVZ DUMPDIR ($dumpdir) is invalid" if (! -d $dumpdir);
+ mydie "OpenVZ DUMPDIR ($dumpdir) is invalid" if (! -d $dumpdir);
} elsif ($name eq 'VE_PRIVATE') {
$private = $value;
} elsif ($name eq 'VE_ROOT') {
close($fh);
my $confdir = "$vzdir/conf";
- die "OpenVZ conf dir ($confdir) not found" if (! -d $confdir);
+ mydie "OpenVZ conf dir ($confdir) not found" if (! -d $confdir);
my $hostname = undef;
my $conffile = "$confdir/$veid.conf";
- open $fh, "<$conffile" || die "Cannot open $conffile";
+ open $fh, "<$conffile" || mydie "Cannot open $conffile";
while (<$fh>) {
chomp;
my ($name, $value) = split('=');
$private =~ s/"//g;
$private =~ s|/\$VEID|/$veid|g;
- die "VE_PRIVATE is not defined" if (!defined($private));
- die "VE $veid private dir ($private) not found" if (! -d $private);
+ mydie "VE_PRIVATE is not defined" if (!defined($private));
+ mydie "VE $veid private dir ($private) not found" if (! -d $private);
$root =~ s|/\$VEID|/$veid|g;
$root =~ s/"//g;
- die "VE_ROOT is not defined" if (!defined($root));
- die "VE $veid root dir ($root) not found" if (! -d $root);
+ mydie "VE_ROOT is not defined" if (!defined($root));
+ mydie "VE $veid root dir ($root) not found" if (! -d $root);
- die "VE $veid has no HOSTNAME" if (!defined($hostname));
+ mydie "VE $veid has no HOSTNAME" if (!defined($hostname));
my $status = `vzctl status $veid`;
my $running = 0;
my ($host) = @_;
my $hostname = gethostbyaddr(gethostbyname($host), AF_INET);
- die "Host $host not found" if (!defined($hostname));
+ mydie "Host $host not found" if (!defined($hostname));
my $ve = getVeEntry('hostname', $hostname);
- die "Host $hostname is not a VE" if (!defined($ve));
+ mydie "Host $hostname is not a VE" if (!defined($ve));
return $ve;
}
{
my ($ve) = @_;
- die "No VE to print" if (!defined($ve));
+ mydie "No VE to print" if (!defined($ve));
print STDERR '{ ';
#foreach my $k (keys %{$velist[0]}) {
foreach my $k (keys %{$ve}) {
sub delSnapshot($)
{
my ($ve) = @_;
- die "No VE record for delSnapshot" if (!defined($ve));
+ mydie "No VE record for delSnapshot" if (!defined($ve));
#print "delSnapshot: doing nothing for now\n";
#printVeEntry($ve);
{
my ($dir) = @_;
- open my $fh, "df -P '$dir'|" || die "Unable to exec df";
+ open my $fh, "df -P '$dir'|" || mydie "Unable to exec df";
<$fh>; # skip header
my $df = <$fh>;
close($fh);
my $vg = undef;
my $lv = undef;
- open $fh, "lvscan|" || die "Unable to exec lvscan";
+ open $fh, "lvscan|" || mydie "Unable to exec lvscan";
while (my $line = <$fh>) {
if ($line =~ m|^\s+ACTIVE\s+\'/dev/([^/]+)/([^\']+)\'\s|) {
# vg is $1, lv is $2
}
close($fh);
- die "Device $dev has no LVM entry for volume group" if (!defined($vg));
- die "Device $dev has no LVM entry for logical volume" if (!defined($lv));
+ mydie "Device $dev has no LVM entry for volume group" if (!defined($vg));
+ mydie "Device $dev has no LVM entry for logical volume" if (!defined($lv));
return ($dev, $mpoint, $vg, $lv);
}
sub makeSnapshot($)
{
my ($ve) = @_;
- die "No VE record for snapshot" if (!defined($ve));
+ mydie "No VE record for snapshot" if (!defined($ve));
my ($dev, $lvmpath, $vg, $lv) = getDevice($ve->{'private'});
#print "snapshot: dev=$dev, lvmpath=$lvmpath, vg=$vg, lm=$lv\n";
- die "Can't find device for VE filesystem" if (!defined($dev));
+ mydie "Can't find device for VE filesystem" if (!defined($dev));
my $snaproot = "/$vzsnap";
mkpath "$snaproot" ||
- die "Can't create snapshot directory (backup in progress?)";
+ mydie "Can't create snapshot directory (backup in progress?)";
$ve->{'snaproot'} = $snaproot;
my $snapdev = "/dev/$vg/$vzsnap";
- die "Snapshot dev $snapdev exists (backup in progress?)" if (-b $snapdev);
+ mydie "Snapshot dev $snapdev exists (backup in progress?)" if (-b $snapdev);
# FIXME: xfs_freeze hangs; without it we are likely to fail at some point.
# FIXME: finding the mount point instead of hard coding.
#cmdSystemOrEval("xfs_freeze -f /var/lib/vz/private");
#cmdSystemOrEval("xfs_freeze -u /var/lib/vz/private");
if (! -b $snapdev) {
delSnapshot($ve);
- die "Failed to create snapshot device"
+ mydie "Failed to create snapshot device"
}
$ve->{'snapdev'} = $snapdev;
cmdSystemOrEval("mount -o noatime,nodiratime $snapdev $snaproot");
#print "snapshot: snapprivate = $snapprivate\n";
if ($snapprivate !~ /$vzsnap/ || ! -d $snapprivate) {
delSnapshot($ve);
- die "Wrong lvm mount point $lvmpath";
+ mydie "Wrong lvm mount point $lvmpath";
}
$ve->{'snapprivate'} = $snapprivate;
if (! -d "/$snapprivate/etc") {
delSnapshot($ve);
- die "Mount failure or filesystem doesn't belong to a VE";
+ mydie "Mount failure or filesystem doesn't belong to a VE";
}
}
sub saveConfigs($)
{
my ($ve) = @_;
- die "No VE record for saveConfigs" if (!defined($ve));
+ mydie "No VE record for saveConfigs" if (!defined($ve));
# Copy configuration and other scripts belonging to VE into VE's snapshot.
# Do this in a manner similar to that supported by vzdump for consistency.
sub restoreConfigs($)
{
my ($ve) = @_;
- die "No VE record for restoreConfigs" if (!defined($ve));
+ mydie "No VE record for restoreConfigs" if (!defined($ve));
my $private = $ve->{'private'};
- die "Can't restore invalid private dir $private" if (! -d $private);
+ mydie "Can't restore invalid private dir $private" if (! -d $private);
my $qprivate = $private;
$qprivate =~ s|/|\\\/|g;
$qprivate =~ s|/$ve->{'VEID'}$|/\$VEID|;
my $root = $ve->{'root'};
- die "Can't restore invalid root dir $root" if (! -d $root);
+ mydie "Can't restore invalid root dir $root" if (! -d $root);
my $qroot = $root;
$qroot =~ s|/|\\\/|g;
$qroot =~ s|/$ve->{'VEID'}$|/\$VEID|;
sub checkRunningClient()
{
- die "A backup or restore operation are already in progress"
+ mydie "A backup or restore operation are already in progress"
if (Proc::PID::File->running({ dir => '/tmp', verify => 1 }));
# Clean up any prior backup's mount point and snapshot, if it exists.
# Note that the snapshot is small, so we don't really want it lying around!
my $vg = undef;
- open my $fh, "lvscan|" || die "Unable to exec lvscan";
+ open my $fh, "lvscan|" || mydie "Unable to exec lvscan";
while (my $line = <$fh>) {
if ($line =~ m|^\s+ACTIVE\s+Snapshot\s+\'/dev/([^/]+)/$vzsnap\'\s|) {
$vg = $1;
checkRunningClient();
my $veid = shift(@ARGV);
- die "HN needs a VEID argument" if (!defined($veid));
- die "HN: no command to execute after VEID" if ($#ARGV < 0);
+ mydie "HN needs a VEID argument" if (!defined($veid));
+ mydie "HN: no command to execute after VEID" if ($#ARGV < 0);
# We (the HN where this code is running) must be hosting the requested VE.
my $ve = localVe($veid);
- die "VE $veid not found on this HN" if (!defined($ve));
+ mydie "VE $veid not found on this HN" if (!defined($ve));
#printVeEntry($ve);
if (!$restore) {
cmdSystemOrEval("vzctl stop $veid >/dev/null 2>&1") if ($ve->{'running'});
makeSnapshot($ve);
cmdSystemOrEval("vzctl start $veid >/dev/null 2>&1") if ($ve->{'running'});
- die "Failed to make snapshot of filesystem for VE $veid"
+ mydie "Failed to make snapshot of filesystem for VE $veid"
if (!defined($ve->{'snaproot'}));
# Save the VE configuration from its hosted HN into the filesystem. If
my ($restore) = @_;
my $host = shift(@ARGV);
- die "Hostname argument required" if (!defined($host));
- die "No command to execute after hostname" if ($#ARGV < 0);
+ mydie "Hostname argument required" if (!defined($host));
+ mydie "No command to execute after hostname" if ($#ARGV < 0);
# Find $host in the list of VEs
loadVeList();
my $ve = getVeByHostname($host);
- die "$host is not a VE or list of HNs in $0 is wrong" if (!defined($ve));
+ mydie "$host is not a VE or list of HNs in $0 is wrong" if (!defined($ve));
#printVeEntry($ve);
# The client command is bisected by the next occurrence of $host. Everything
}
}
}
- die "No ssh command found" if ($#sshCmd < 0);
- die "No xfer command found" if ($#xferCmd < 0);
+ mydie "No ssh command found" if ($#sshCmd < 0);
+ mydie "No xfer command found" if ($#xferCmd < 0);
#print "ssh command: |".join(' ', @sshCmd)."|\n";
#print "xfer command: |".join(' ', @xferCmd)."|\n";