+++ /dev/null
-#
-# OS/2 specific Makefile for the EMX environment
-#
-# You need GNU Make 3.71, gcc 2.5.7, emx 0.8h and GNU fileutils 3.9
-# or similar tools. C++ interface and de.exe weren't tested.
-#
-# Rename this file "Makefile".
-#
-
-# Primary targets:
-# gc.a - builds basic library
-# c++ - adds C++ interface to library and include directory
-# cords - adds cords (heavyweight strings) to library and include directory
-# test - prints porting information, then builds basic version of gc.a, and runs
-# some tests of collector and cords. Does not add cords or c++ interface to gc.a
-# cord/de.exe - builds dumb editor based on cords.
-CC= gcc
-CXX=g++
-# Needed only for "make c++", which adds the c++ interface
-
-CFLAGS= -O -DALL_INTERIOR_POINTERS -DSILENT
-# Setjmp_test may yield overly optimistic results when compiled
-# without optimization.
-# -DSILENT disables statistics printing, and improves performance.
-# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
-# altered stubborn objects, at substantial performance cost.
-# -DFIND_LEAK causes the collector to assume that all inaccessible
-# objects should have been explicitly deallocated, and reports exceptions
-# -DSOLARIS_THREADS enables support for Solaris (thr_) threads.
-# (Clients should also define SOLARIS_THREADS and then include
-# gc.h before performing thr_ or GC_ operations.)
-# -DALL_INTERIOR_POINTERS allows all pointers to the interior
-# of objects to be recognized. (See gc_private.h for consequences.)
-# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
-# usually causing it to use less space in such situations.
-# Incremental collection no longer works in this case.
-# -DDONT_ADD_BYTE_AT_END is meaningful only with
-# -DALL_INTERIOR_POINTERS. Normally -DALL_INTERIOR_POINTERS
-# causes all objects to be padded so that pointers just past the end of
-# an object can be recognized. This can be expensive. (The padding
-# is normally more than one byte due to alignment constraints.)
-# -DDONT_ADD_BYTE_AT_END disables the padding.
-
-AR= ar
-RANLIB= ar s
-
-# Redefining srcdir allows object code for the nonPCR version of the collector
-# to be generated in different directories
-srcdir = .
-VPATH = $(srcdir)
-
-OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dyn_load.o dbg_mlc.o malloc.o stubborn.o checksums.o typd_mlc.o ptr_chck.o mallocx.o
-
-CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
-
-CORD_INCLUDE_FILES= $(srcdir)/gc.h $(srcdir)/cord/cord.h $(srcdir)/cord/ec.h \
- $(srcdir)/cord/cord_pos.h
-
-# Libraries needed for curses applications. Only needed for de.
-CURSES= -lcurses -ltermlib
-
-# The following is irrelevant on most systems. But a few
-# versions of make otherwise fork the shell specified in
-# the SHELL environment variable.
-SHELL= bash
-
-SPECIALCFLAGS =
-# Alternative flags to the C compiler for mach_dep.c.
-# Mach_dep.c often doesn't like optimization, and it's
-# not time-critical anyway.
-
-all: gc.a gctest.exe
-
-$(OBJS) test.o: $(srcdir)/gc_priv.h $(srcdir)/gc_hdrs.h $(srcdir)/gc.h \
- $(srcdir)/gcconfig.h $(srcdir)/gc_typed.h
-# The dependency on Makefile is needed. Changing
-# options such as -DSILENT affects the size of GC_arrays,
-# invalidating all .o files that rely on gc_priv.h
-
-mark.o typd_mlc.o finalize.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
-
-gc.a: $(OBJS)
- $(AR) ru gc.a $(OBJS)
- $(RANLIB) gc.a
-
-cords: $(CORD_OBJS) cord/cordtest.exe
- $(AR) ru gc.a $(CORD_OBJS)
- $(RANLIB) gc.a
- cp $(srcdir)/cord/cord.h include/cord.h
- cp $(srcdir)/cord/ec.h include/ec.h
- cp $(srcdir)/cord/cord_pos.h include/cord_pos.h
-
-gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/gc_cpp.h
- $(CXX) -c -O $(srcdir)/gc_cpp.cc
-
-c++: gc_cpp.o $(srcdir)/gc_cpp.h
- $(AR) ru gc.a gc_cpp.o
- $(RANLIB) gc.a
- cp $(srcdir)/gc_cpp.h include/gc_cpp.h
-
-mach_dep.o: $(srcdir)/mach_dep.c
- $(CC) -o mach_dep.o -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-
-mark_rts.o: $(srcdir)/mark_rts.c
- $(CC) -o mark_rts.o -c $(CFLAGS) $(srcdir)/mark_rts.c
-
-cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
- $(CC) $(CFLAGS) -c $(srcdir)/cord/cordbscs.c -o cord/cordbscs.o
-
-cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
- $(CC) $(CFLAGS) -c $(srcdir)/cord/cordxtra.c -o cord/cordxtra.o
-
-cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
- $(CC) $(CFLAGS) -c $(srcdir)/cord/cordprnt.c -o cord/cordprnt.o
-
-cord/cordtest.exe: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
- $(CC) $(CFLAGS) -o cord/cordtest.exe $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a
-
-cord/de.exe: $(srcdir)/cord/de.c $(srcdir)/cord/cordbscs.o $(srcdir)/cord/cordxtra.o gc.a
- $(CC) $(CFLAGS) -o cord/de.exe $(srcdir)/cord/de.c $(srcdir)/cord/cordbscs.o $(srcdir)/cord/cordxtra.o gc.a $(CURSES)
-
-clean:
- rm -f gc.a tests/test.o gctest.exe output-local output-diff $(OBJS) \
- setjmp_test mon.out gmon.out a.out core \
- $(CORD_OBJS) cord/cordtest.exe cord/de.exe
- -rm -f *~
-
-gctest.exe: tests/test.o gc.a
- $(CC) $(CFLAGS) -o gctest.exe tests/test.o gc.a
-
-# If an optimized setjmp_test generates a segmentation fault,
-# odds are your compiler is broken. Gctest may still work.
-# Try compiling setjmp_t.c unoptimized.
-setjmp_test.exe: $(srcdir)/setjmp_t.c $(srcdir)/gc.h
- $(CC) $(CFLAGS) -o setjmp_test.exe $(srcdir)/setjmp_t.c
-
-test: setjmp_test.exe gctest.exe
- ./setjmp_test
- ./gctest
- make cord/cordtest.exe
- cord/cordtest
projects / msp430-gcc.git / blobdiff