X-Git-Url: https://oss.titaniummirror.com/gitweb/?a=blobdiff_plain;f=Makefile;fp=Makefile;h=0000000000000000000000000000000000000000;hb=74e64be8b45a7ff22f994552a95c797575dbe384;hp=853dd9323e15c8fbf1a8e68e8353a4fadc7ec48b;hpb=2ae34928adb5da51a66170a52678bb4a7d2d212a;p=cp210x.git

diff --git a/Makefile b/Makefile
deleted file mode 100644
index 853dd93..0000000
--- a/Makefile
+++ /dev/null
@@ -1,118 +0,0 @@
-# Makefile for newer cp2101 driver, we call cp210x
-# Essentially, it makes a debian source package which
-# then can be built by pbuilder, etc.
-
-# Change or override these values as necessary for each package release
-
-PKGVER  = 0.11.3
-DEBRELEASE = 7tmi
-
-
-# No need to change anything below this line
-
-REPOID := $(shell svn info 2>/dev/null | grep "Revision: " | sed -e s'/^[^0-9]*\([0-9]*\).*$$/svn:revision \1/')
-ifeq (,$(REPOID))
-  REPOID := $(shell git svn info 2>/dev/null | grep "Revision: " | sed -e s'/^[^0-9]*\([0-9]*\).*$$/svn:revision \1/')
-ifeq (,$(REPOID))
-    REPOID := $(shell git log --no-decorate -n1 2>/dev/null | head -1 | sed -e s'/^/git:/')
-endif
-endif
-ifeq (,$(REPOID))
-  $(error You much check the code out via svn, git-svn, or git)
-endif
-
-USER := $(shell whoami)
-REPOHOST := repo
-BUILD := build
-#DEBDIST := $(shell lsb_release -cs)
-DEBDIST := hardy
-DEBVER := $(PKGVER)-$(DEBRELEASE)
-RFC822DATE := $(shell date --rfc-822)
-ROOTNAME := cp210x
-PACKAGE := $(ROOTNAME)-module-dkms
-TARFILE := $(PACKAGE)_$(DEBVER).orig.tar.gz
-DEBSRC := $(PACKAGE)-$(PKGVER)
-ARCH := $(shell dpkg-architecture -qDEB_HOST_ARCH)
-DEBFILE := $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).deb
-DEBSRCFILE := $(BUILD)/$(PACKAGE)_$(DEBVER).dsc
-CHANGESFILE := $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).changes
-UPLOADFILE := $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).upload
-
-
-source: $(DEBSRCFILE)
-$(DEBSRCFILE): $(BUILD)/debian-stamp
-	cd $(BUILD) && dpkg-source -b $(DEBSRC)
-	touch $@
-
-
-release: $(UPLOADFILE)
-$(UPLOADFILE): $(CHANGESFILE)
-	: # Requires ~/.dput.cf and upload server configured properly
-	dput $(REPOHOST) $(CHANGESFILE)
-
-
-pbuilder: $(CHANGESFILE)
-$(CHANGESFILE): $(DEBSRCFILE)
-	: # Requires ~/.dput.cf and upload server configured properly
-	sudo pbuilder build $(DEBSRCFILE)
-	sudo mv /var/cache/pbuilder/result/$(PACKAGE)_$(DEBVER)* $(BUILD)/
-	sudo chown $(USER) $(BUILD)/*
-	debsign $(CHANGESFILE)
-
-
-binary: $(DEBFILE)
-$(DEBFILE): $(BUILD)/debian-stamp
-	cd $(BUILD)/$(DEBSRC) && dpkg-buildpackage -sa
-
-
-$(BUILD)/src-stamp: Makefile.dkms dkms.conf $(wildcard src/*)
-	mkdir -p $(BUILD)
-	rm -rf $(BUILD)/$(DEBSRC)
-	cp -a src $(BUILD)/$(DEBSRC)
-	perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/cp210x.c
-	perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/cp210x.c.karmic
-	perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/cp210x.c.lucid
-	perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/cp210x.c.maverick
-	cp Makefile.dkms $(BUILD)/$(DEBSRC)
-	cp dkms.conf $(BUILD)/$(DEBSRC)
-	perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/dkms.conf
-	find $(BUILD)/$(DEBSRC) -name .svn -type d -exec rm -rf "{}" ";" 2>/dev/null || exit 0
-	rm -rf $(BUILD)/$(DEBSRC)/.git || exit 0
-	tar -C $(BUILD) -czf $(BUILD)/$(TARFILE) $(DEBSRC)
-	touch $@
-
-
-configure: $(BUILD)/debian-stamp
-$(BUILD)/debian-stamp: $(BUILD)/src-stamp $(wildcard debian.in/*)
-	mkdir -p $(BUILD)/$(DEBSRC)/debian
-	rsync --quiet -avz --exclude=.svn/ --exclude=.git/ debian.in/ $(BUILD)/$(DEBSRC)/debian/
-	perl -i -pe 's/xxPACKAGExx/$(PACKAGE)/g' $(BUILD)/$(DEBSRC)/debian/*
-	perl -i -pe 's/xxROOTNAMExx/$(ROOTNAME)/g' $(BUILD)/$(DEBSRC)/debian/*
-	perl -i -pe 's/xxPKGVERxx/$(PKGVER)/g' $(BUILD)/$(DEBSRC)/debian/*
-	perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/debian/*
-	perl -i -pe 's/xxDEBDISTxx/$(DEBDIST)/g' $(BUILD)/$(DEBSRC)/debian/*
-	perl -i -pe 's/xxRFC822DATExx/$(RFC822DATE)/g' $(BUILD)/$(DEBSRC)/debian/*
-	perl -i -pe 's/xxREPOIDxx/$(REPOID)/g' $(BUILD)/$(DEBSRC)/debian/*
-	touch $@
-
-
-clean:
-	rm -rf $(BUILD)
-
-
-debug:
-	@echo "BUILD = $(BUILD)"
-	@echo "PKGVER = $(PKGVER)"
-	@echo "REPOID = $(REPOID)"
-	@echo "DEBRELEASE = $(DEBRELEASE)"
-	@echo "DEBVER = $(DEBVER)"
-	@echo "RFC822DATE = $(RFC822DATE)"
-	@echo "PACKAGE = $(PACKAGE)"
-	@echo "TARFILE = $(TARFILE)"
-	@echo "DEBSRC = $(DEBSRC)"
-	@echo "ARCH = $(ARCH)"
-	@echo "DEBFILE = $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).deb"
-	@echo "DEBSRCFILE = $(BUILD)/$(PACKAGE)_$(DEBVER).dsc"
-
-
-.PHONY: clean binary source configure pbuilder release