as verified by running the following for the platform of interest:
java net.tinyos.tools.Listen -comm serial@/dev/ttyUSBXXX:<baud_rate>
-NOTE:: The baud rate 57600 must be used telos based motes, as its configuration
+NOTE: The baud rate 57600 must be used telos based motes, as its configuration
has been changed to work with this baud rate when compiled for tosthreads. I.e.
DO NOT just substitute 'telosb' or 'tmote' for <baud_rate> above. Explicitly
set it to 57600.
make
java net.tinyos.sf.SerialForwarder -comm serial@<serial port>:<baud_rate>
# e.g., java net.tinyps.sf.SerialForwarder -comm serial@/dev/ttyUSB0:mica2
- # or java net.tinyps.sf.SerialForwarder -comm serial@COM2:telosb
+ # or java net.tinyps.sf.SerialForwarder -comm serial@COM2:57600
./run
NOTE:: The baud rate 57600 must be used telos based motes, as its configuration
underlying collection protocol. The makefile can be modified to work with
MultihopLQI by changing the appropriate include directories.
+ The baud rate 57600 must be used telos based motes, as its configuration
+ has been changed to work with this baud rate when compiled for tosthreads. I.e.
+ DO NOT just substitute 'telosb' or 'tmote' for <baud_rate> above. Explicitly
+ set it to 57600.
+
Known bugs/limitations:
Warnings are issued about fan out on the 'Snoop.receive' and 'Receive.receive'
events. These warnings are harmless and are the result of providing a C based
00 ff ff 00 00 06 00 25 00 00 00 a2 00 a2
00 ff ff 00 00 06 00 25 00 00 00 a3 00 a3
+NOTE: The baud rate 57600 must be used telos based motes, as its configuration
+has been changed to work with this baud rate when compiled for tosthreads. I.e.
+DO NOT just substitute 'telosb' or 'tmote' for <baud_rate> above. Explicitly
+set it to 57600.
+
Tools:
None.
proper operation of the application.
java net.tinyos.tools.PrintfClient -comm serial@/dev/ttyUSBXXX:<baud_rate>
-NOTE:: The baud rate 57600 must be used telos based motes, as its configuration
+NOTE: The baud rate 57600 must be used telos based motes, as its configuration
has been changed to work with this baud rate when compiled for tosthreads. I.e.
DO NOT just substitute 'telosb' or 'tmote' for <baud_rate> above. Explicitly
set it to 57600.
of interest:
java net.tinyos.tools.Listen -comm serial@/dev/ttyUSBXXX:<baud_rate>
-NOTE:: The baud rate 57600 must be used telos based motes, as its configuration
+NOTE: The baud rate 57600 must be used telos based motes, as its configuration
has been changed to work with this baud rate when compiled for tosthreads. I.e.
DO NOT just substitute 'telosb' or 'tmote' for <baud_rate> above. Explicitly
set it to 57600.