+++ /dev/null
-/****************************************************************************
- * *
- * GNAT COMPILER COMPONENTS *
- * *
- * T Y P E S *
- * *
- * C Header File *
- * *
- * $Revision: 1.1.16.1 $
- * *
- * Copyright (C) 1992-2001, Free Software Foundation, Inc. *
- * *
- * GNAT is free software; you can redistribute it and/or modify it under *
- * terms of the GNU General Public License as published by the Free Soft- *
- * ware Foundation; either version 2, or (at your option) any later ver- *
- * sion. GNAT is distributed in the hope that it will be useful, but WITH- *
- * OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY *
- * or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License *
- * for more details. You should have received a copy of the GNU General *
- * Public License distributed with GNAT; see file COPYING. If not, write *
- * to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, *
- * MA 02111-1307, USA. *
- * *
- * GNAT was originally developed by the GNAT team at New York University. *
- * Extensive contributions were provided by Ada Core Technologies Inc. *
- * *
- ****************************************************************************/
-
-/* This is the C file that corresponds to the Ada package spec Types. It was
- created manually from the files types.ads and types.adb.
-
- This package contains host independent type definitions which are used
- throughout the compiler modules. The comments in the C version are brief
- reminders of the purpose of each declaration. For complete documentation,
- see the Ada version of these definitions. */
-
-/* Boolean Types: */
-
-/* Boolean type (cannot use enum, because of bit field restriction on some
- compilers). */
-typedef unsigned char Boolean;
-#define False 0
-#define True 1
-
-/* General Use Integer Types */
-
-/* Signed 32/bit integer */
-typedef int Int;
-
-/* Signed 16 bit integer */
-typedef short Short;
-
-/* Non/negative Int values */
-typedef Int Nat;
-
-/* Positive Int values */
-typedef Int Pos;
-
-/* 8/bit unsigned integer */
-typedef char Byte;
-
-/* 8/Bit Character and String Types: */
-
-/* 8/bit character type */
-typedef char Char;
-
-/* Graphic characters, as defined in ARM */
-typedef Char Graphic_Character;
-
-/* Line terminator characters (LF, VT, FF, CR) */
-typedef Char Line_Terminator;
-
-/* Characters with the upper bit set */
-typedef Char Upper_Half_Character;
-
-/* String type built on Char (note that zero is an OK index) */
-typedef Char *Str;
-
-/* Pointer to string of Chars */
-typedef Char *Str_Ptr;
-
-/* Types for the fat pointer used for strings and the template it
- points to. */
-typedef struct {int Low_Bound, High_Bound; } String_Template;
-typedef struct {const char *Array; String_Template *Bounds; }
- __attribute ((aligned (sizeof (char *) * 2))) Fat_Pointer;
-
-/* Types for Node/Entity Kinds: */
-
-/* The reason that these are defined here in the C version, rather than in the
- corresponding packages is that the requirement for putting bodies of
- inlined stuff IN the C header changes the dependencies. Both a-sinfo.h
- and a-einfo.h now reference routines defined in tree.h.
-
- Note: these types would more naturally be defined as unsigned char, but
- once again, the annoying restriction on bit fields for some compilers
- bites us! */
-
-typedef unsigned int Node_Kind;
-typedef unsigned int Entity_Kind;
-
-/* Types used for Text Buffer Handling: */
-
-/* Type used for subscripts in text buffer. */
-typedef Int Text_Ptr;
-
-/* Text buffer used to hold source file or library information file. */
-typedef Char *Text_Buffer;
-
-/* Pointer to text buffer. */
-typedef Char *Text_Buffer_Ptr;
-
-/* Types used for Source Input Handling: */
-
-/* Line number type, used for storing all line numbers. */
-typedef Int Line_Number_Type;
-
-/* Column number type, used for storing all column numbers. */
-typedef Int Column_Number_Type;
-
-/* Type used to store text of a source file. */
-typedef Text_Buffer Source_Buffer;
-
-/* Pointer to source buffer. */
-typedef Text_Buffer_Ptr Source_Buffer_Ptr;
-
-/* Type used for source location. */
-typedef Text_Ptr Source_Ptr;
-
-/* Value used to indicate no source position set. */
-#define No_Location -1
-
-/* Used for Sloc in all nodes in the representation of package Standard. */
-#define Standard_Location -2
-
-/* Type used for union of all possible ID values covering all ranges */
-typedef int Union_Id;
-
-/* Range definitions for Tree Data: */
-
-#define List_Low_Bound -100000000
-#define List_High_Bound 0
-
-#define Node_Low_Bound 0
-#define Node_High_Bound 99999999
-
-#define Elist_Low_Bound 100000000
-#define Elist_High_Bound 199999999
-
-#define Elmt_Low_Bound 200000000
-#define Elmt_High_Bound 299999999
-
-#define Names_Low_Bound 300000000
-#define Names_High_Bound 399999999
-
-#define Strings_Low_Bound 400000000
-#define Strings_High_Bound 499999999
-
-#define Ureal_Low_Bound 500000000
-#define Ureal_High_Bound 599999999
-
-#define Uint_Low_Bound 600000000
-#define Uint_Table_Start 2000000000
-#define Uint_High_Bound 2099999999
-
-#define Char_Code_Bias 2100000000
-
-SUBTYPE (List_Range, Int, List_Low_Bound, List_High_Bound)
-SUBTYPE (Node_Range, Int, Node_Low_Bound, Node_High_Bound)
-SUBTYPE (Elist_Range, Int, Elist_Low_Bound, Elist_High_Bound)
-SUBTYPE (Elmt_Range, Int, Elmt_Low_Bound, Elmt_High_Bound)
-SUBTYPE (Names_Range, Int, Names_Low_Bound, Names_High_Bound)
-SUBTYPE (Strings_Range, Int, Strings_Low_Bound, Strings_High_Bound)
-SUBTYPE (Uint_Range, Int, Uint_Low_Bound, Uint_High_Bound)
-SUBTYPE (Ureal_Range, Int, Ureal_Low_Bound, Ureal_High_Bound)
-SUBTYPE (Char_Code_Range, Int, Char_Code_Bias, (Char_Code_Bias + 65535))
-
-/* Types for Names_Table Package: */
-
-typedef Int Name_Id;
-
-/* Name_Id value for no name present. */
-#define No_Name Names_Low_Bound
-
-/* Name_Id value for bad name. */
-#define Error_Name (Names_Low_Bound + 1)
-
-/* First subscript of names table. */
-#define First_Name_Id (Names_Low_Bound + 2)
-
-/* Types for Tree Package: */
-
-/* Subscript of nodes table entry. */
-typedef Int Node_Id;
-
-/* Used in semantics for Node_Id value referencing an entity. */
-typedef Node_Id Entity_Id;
-
-/* Null node. */
-#define Empty 0
-
-/* Error node. */
-#define Error 1
-
-/* Subscript of first allocated node. */
-#define First_Node_Id Empty
-
-/* Subscript of entry in lists table. */
-typedef Int List_Id;
-
-/* Indicates absence of a list. */
-#define No_List 0
-
-/* Error list. */
-#define Error_List List_Low_Bound
-
-/* Subscript of first allocated list header. */
-#define First_List_Id Error_List
-
-/* Element list Id, subscript value of entry in lists table. */
-typedef Int Elist_Id;
-
-/* Used to indicate absence of an element list. */
-#define No_Elist Elist_Low_Bound
-
-/* Subscript of first allocated elist header */
-#define First_Elist_Id (No_Elist + 1)
-
-/* Element Id, subscript value of entry in elements table. */
-typedef Int Elmt_Id;
-
-/* Used to indicate absence of a list element. */
-#define No_Elmt Elmt_Low_Bound
-
-/* Subscript of first allocated element */
-#define First_Elmt_Id (No_Elmt + 1)
-
-/* Types for String_Table Package: */
-
-/* Subscript of strings table entry. */
-typedef Int String_Id;
-
-/* Used to indicate missing string Id. */
-#define No_String Strings_Low_Bound
-
-/* Subscript of first entry in strings table. */
-#define First_String_Id (No_String + 1)
-
-/* Types for Uint_Support Package: */
-
-/* Type used for representation of universal integers. */
-typedef Int Uint;
-
-/* Used to indicate missing Uint value. */
-#define No_Uint Uint_Low_Bound
-
-/* Base value used to represent Uint values. */
-#define Base 32768
-
-/* Minimum and maximum integers directly representable as Uint values */
-#define Min_Direct (-(Base - 1))
-#define Max_Direct ((Base - 1) * (Base - 1))
-
-#define Uint_Direct_Bias (Uint_Low_Bound + Base)
-#define Uint_Direct_First (Uint_Direct_Bias + Min_Direct)
-#define Uint_Direct_Last (Uint_Direct_Bias + Max_Direct)
-
-/* Define range of direct biased values */
-SUBTYPE (Uint_Direct, Uint, Uint_Direct_First, Uint_Direct_Last)
-
-/* Constants in Uint format. */
-#define Uint_0 (Uint_Direct_Bias + 0)
-#define Uint_1 (Uint_Direct_Bias + 1)
-#define Uint_2 (Uint_Direct_Bias + 2)
-#define Uint_10 (Uint_Direct_Bias + 10)
-#define Uint_16 (Uint_Direct_Bias + 16)
-
-/* Types for Ureal_Support Package: */
-
-/* Type used for representation of universal reals. */
-typedef Int Ureal;
-
-/* Used to indicate missing Uint value. */
-#define No_Ureal Ureal_Low_Bound
-
-/* Subscript of first entry in Ureal table. */
-#define Ureal_First_Entry (No_Ureal + 1)
-
-/* Character Code Type: */
-
-/* Character code value, intended to be 16 bits. */
-typedef short Char_Code;
-
-/* Types Used for Library Management: */
-
-/* Unit number. */
-typedef Int Unit_Number_Type;
-
-/* Unit number value for main unit. */
-#define Main_Unit 0
-
-/* Type used for lines table. */
-typedef Source_Ptr *Lines_Table_Type;
-
-/* Type used for pointer to lines table. */
-typedef Source_Ptr *Lines_Table_Ptr;
-
-/* Length of time stamp value. */
-#define Time_Stamp_Length 22
-
-/* Type used to represent time stamp. */
-typedef Char *Time_Stamp_Type;
-
-/* Name_Id synonym used for file names. */
-typedef Name_Id File_Name_Type;
-
-/* Constant used to indicate no file found. */
-#define No_File No_Name
-
-/* Name_Id synonym used for unit names. */
-typedef Name_Id Unit_Name_Type;
-
-/* Definitions for mechanism type and values */
-typedef Int Mechanism_Type;
-#define Default 0
-#define By_Copy (-1)
-#define By_Reference (-2)
-#define By_Descriptor (-3)
-#define By_Descriptor_UBS (-4)
-#define By_Descriptor_UBSB (-5)
-#define By_Descriptor_UBA (-6)
-#define By_Descriptor_S (-7)
-#define By_Descriptor_SB (-8)
-#define By_Descriptor_A (-9)
-#define By_Descriptor_NCA (-10)
projects / msp430-gcc.git / blobdiff