From: mmaroti <mmaroti>
Date: Tue, 10 Mar 2009 17:32:22 +0000 (+0000)
Subject: moved to tos/interfaces
X-Git-Tag: rc_6_tinyos_2_1_1~465
X-Git-Url: https://oss.titaniummirror.com/gitweb/?p=tinyos-2.x.git;a=commitdiff_plain;h=da888833729852a8338012c9307ceb636daf67f6

moved to tos/interfaces
---

diff --git a/tos/chips/rf230/FastSpiByte.nc b/tos/chips/rf230/FastSpiByte.nc
deleted file mode 100644
index f4e56ffb..00000000
--- a/tos/chips/rf230/FastSpiByte.nc
+++ /dev/null
@@ -1,63 +0,0 @@
-/*
- * Copyright (c) 2007, Vanderbilt University
- * All rights reserved.
- *
- * Permission to use, copy, modify, and distribute this software and its
- * documentation for any purpose, without fee, and without written agreement is
- * hereby granted, provided that the above copyright notice, the following
- * two paragraphs and the author appear in all copies of this software.
- * 
- * IN NO EVENT SHALL THE VANDERBILT UNIVERSITY BE LIABLE TO ANY PARTY FOR
- * DIRECT, INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES ARISING OUT
- * OF THE USE OF THIS SOFTWARE AND ITS DOCUMENTATION, EVEN IF THE VANDERBILT
- * UNIVERSITY HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- * 
- * THE VANDERBILT UNIVERSITY SPECIFICALLY DISCLAIMS ANY WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY
- * AND FITNESS FOR A PARTICULAR PURPOSE.  THE SOFTWARE PROVIDED HEREUNDER IS
- * ON AN "AS IS" BASIS, AND THE VANDERBILT UNIVERSITY HAS NO OBLIGATION TO
- * PROVIDE MAINTENANCE, SUPPORT, UPDATES, ENHANCEMENTS, OR MODIFICATIONS.
- *
- * Author: Miklos Maroti
- */
-
-/**
- * This is a natural extension of the SpiByte interface which allows fast 
- * data transfers comparable to the SpiStream interface. Use may want to
- * use the following code sequence to write a buffer as fast as possible
- *
- *	call FastSpiByte.spiSplitWrite(data[0]); // the first byte
- *	for(i = 1; i < length; ++i) {
- *	   // finish the previous one and write the next one
- *	  call FastSpiByte.spiSplitReadWrite(data[i]);
- *	}
- *	call FastSpiByte.spiSlitRead(); // finish the last one
- */
-interface FastSpiByte
-{
-	/**
-	 * Starts a split-phase SPI data transfer with the given data.
-	 * A spiSplitRead command must follow this command even if the
-	 * result is unimportant. The SpiByte interface should be 
-	 * extended with this protocol.
-	 */
-	async command void splitWrite(uint8_t data);
-
-	/**
-	 * Finishes the split-phase SPI data transfer by waiting till 
-	 * the write command comletes and returning the received data.
-	 */
-	async command uint8_t splitRead();
-
-	/**
-	 * This command first reads the SPI register and then writes
-	 * there the new data, then returns
-	 */
-	async command uint8_t splitReadWrite(uint8_t data);
-
-	/**
-	 * This is the standard SpiByte.write command but a little
-	 * faster as we shuold not need to adjust the power state there.
-	 */
-	async command uint8_t write(uint8_t data);
-}