This is g77.info, produced by makeinfo version 4.5 from g77.texi. INFO-DIR-SECTION Programming START-INFO-DIR-ENTRY * g77: (g77). The GNU Fortran compiler. END-INFO-DIR-ENTRY This file documents the use and the internals of the GNU Fortran (`g77') compiler. It corresponds to the GCC-3.2.3 version of `g77'. Published by the Free Software Foundation 59 Temple Place - Suite 330 Boston, MA 02111-1307 USA Copyright (C) 1995,1996,1997,1998,1999,2000,2001,2002 Free Software Foundation, Inc. Permission is granted to copy, distribute and/or modify this document under the terms of the GNU Free Documentation License, Version 1.1 or any later version published by the Free Software Foundation; with the Invariant Sections being "GNU General Public License" and "Funding Free Software", the Front-Cover texts being (a) (see below), and with the Back-Cover Texts being (b) (see below). A copy of the license is included in the section entitled "GNU Free Documentation License". (a) The FSF's Front-Cover Text is: A GNU Manual (b) The FSF's Back-Cover Text is: You have freedom to copy and modify this GNU Manual, like GNU software. Copies published by the Free Software Foundation raise funds for GNU development. Contributed by James Craig Burley (). Inspired by a first pass at translating `g77-0.5.16/f/DOC' that was contributed to Craig by David Ronis ().  File: g77.info, Node: Other Intrinsics, Prev: Intrinsic Groups, Up: Compiler Intrinsics Other Intrinsics ---------------- `g77' supports intrinsics other than those in the GNU Fortran language proper. This set of intrinsics is described below. (Note that the empty lines appearing in the menu below are not intentional--they result from a bug in the `makeinfo' program.) * Menu: * ACosD Intrinsic:: (Reserved for future use.) * AIMax0 Intrinsic:: (Reserved for future use.) * AIMin0 Intrinsic:: (Reserved for future use.) * AJMax0 Intrinsic:: (Reserved for future use.) * AJMin0 Intrinsic:: (Reserved for future use.) * ASinD Intrinsic:: (Reserved for future use.) * ATan2D Intrinsic:: (Reserved for future use.) * ATanD Intrinsic:: (Reserved for future use.) * BITest Intrinsic:: (Reserved for future use.) * BJTest Intrinsic:: (Reserved for future use.) * CDAbs Intrinsic:: Absolute value (archaic). * CDCos Intrinsic:: Cosine (archaic). * CDExp Intrinsic:: Exponential (archaic). * CDLog Intrinsic:: Natural logarithm (archaic). * CDSin Intrinsic:: Sine (archaic). * CDSqRt Intrinsic:: Square root (archaic). * ChDir Intrinsic (function):: Change directory. * ChMod Intrinsic (function):: Change file modes. * CosD Intrinsic:: (Reserved for future use.) * DACosD Intrinsic:: (Reserved for future use.) * DASinD Intrinsic:: (Reserved for future use.) * DATan2D Intrinsic:: (Reserved for future use.) * DATanD Intrinsic:: (Reserved for future use.) * Date Intrinsic:: Get current date as dd-Mon-yy. * DbleQ Intrinsic:: (Reserved for future use.) * DCmplx Intrinsic:: Construct `COMPLEX(KIND=2)' value. * DConjg Intrinsic:: Complex conjugate (archaic). * DCosD Intrinsic:: (Reserved for future use.) * DFloat Intrinsic:: Conversion (archaic). * DFlotI Intrinsic:: (Reserved for future use.) * DFlotJ Intrinsic:: (Reserved for future use.) * DImag Intrinsic:: Convert/extract imaginary part of complex (archaic). * DReal Intrinsic:: Convert value to type `REAL(KIND=2)'. * DSinD Intrinsic:: (Reserved for future use.) * DTanD Intrinsic:: (Reserved for future use.) * DTime Intrinsic (function):: Get elapsed time since last time. * FGet Intrinsic (function):: Read a character from unit 5 stream-wise. * FGetC Intrinsic (function):: Read a character stream-wise. * FloatI Intrinsic:: (Reserved for future use.) * FloatJ Intrinsic:: (Reserved for future use.) * FPut Intrinsic (function):: Write a character to unit 6 stream-wise. * FPutC Intrinsic (function):: Write a character stream-wise. * IDate Intrinsic (VXT):: Get local time info (VAX/VMS). * IIAbs Intrinsic:: (Reserved for future use.) * IIAnd Intrinsic:: (Reserved for future use.) * IIBClr Intrinsic:: (Reserved for future use.) * IIBits Intrinsic:: (Reserved for future use.) * IIBSet Intrinsic:: (Reserved for future use.) * IIDiM Intrinsic:: (Reserved for future use.) * IIDInt Intrinsic:: (Reserved for future use.) * IIDNnt Intrinsic:: (Reserved for future use.) * IIEOr Intrinsic:: (Reserved for future use.) * IIFix Intrinsic:: (Reserved for future use.) * IInt Intrinsic:: (Reserved for future use.) * IIOr Intrinsic:: (Reserved for future use.) * IIQint Intrinsic:: (Reserved for future use.) * IIQNnt Intrinsic:: (Reserved for future use.) * IIShftC Intrinsic:: (Reserved for future use.) * IISign Intrinsic:: (Reserved for future use.) * IMax0 Intrinsic:: (Reserved for future use.) * IMax1 Intrinsic:: (Reserved for future use.) * IMin0 Intrinsic:: (Reserved for future use.) * IMin1 Intrinsic:: (Reserved for future use.) * IMod Intrinsic:: (Reserved for future use.) * INInt Intrinsic:: (Reserved for future use.) * INot Intrinsic:: (Reserved for future use.) * IZExt Intrinsic:: (Reserved for future use.) * JIAbs Intrinsic:: (Reserved for future use.) * JIAnd Intrinsic:: (Reserved for future use.) * JIBClr Intrinsic:: (Reserved for future use.) * JIBits Intrinsic:: (Reserved for future use.) * JIBSet Intrinsic:: (Reserved for future use.) * JIDiM Intrinsic:: (Reserved for future use.) * JIDInt Intrinsic:: (Reserved for future use.) * JIDNnt Intrinsic:: (Reserved for future use.) * JIEOr Intrinsic:: (Reserved for future use.) * JIFix Intrinsic:: (Reserved for future use.) * JInt Intrinsic:: (Reserved for future use.) * JIOr Intrinsic:: (Reserved for future use.) * JIQint Intrinsic:: (Reserved for future use.) * JIQNnt Intrinsic:: (Reserved for future use.) * JIShft Intrinsic:: (Reserved for future use.) * JIShftC Intrinsic:: (Reserved for future use.) * JISign Intrinsic:: (Reserved for future use.) * JMax0 Intrinsic:: (Reserved for future use.) * JMax1 Intrinsic:: (Reserved for future use.) * JMin0 Intrinsic:: (Reserved for future use.) * JMin1 Intrinsic:: (Reserved for future use.) * JMod Intrinsic:: (Reserved for future use.) * JNInt Intrinsic:: (Reserved for future use.) * JNot Intrinsic:: (Reserved for future use.) * JZExt Intrinsic:: (Reserved for future use.) * Kill Intrinsic (function):: Signal a process. * Link Intrinsic (function):: Make hard link in file system. * QAbs Intrinsic:: (Reserved for future use.) * QACos Intrinsic:: (Reserved for future use.) * QACosD Intrinsic:: (Reserved for future use.) * QASin Intrinsic:: (Reserved for future use.) * QASinD Intrinsic:: (Reserved for future use.) * QATan Intrinsic:: (Reserved for future use.) * QATan2 Intrinsic:: (Reserved for future use.) * QATan2D Intrinsic:: (Reserved for future use.) * QATanD Intrinsic:: (Reserved for future use.) * QCos Intrinsic:: (Reserved for future use.) * QCosD Intrinsic:: (Reserved for future use.) * QCosH Intrinsic:: (Reserved for future use.) * QDiM Intrinsic:: (Reserved for future use.) * QExp Intrinsic:: (Reserved for future use.) * QExt Intrinsic:: (Reserved for future use.) * QExtD Intrinsic:: (Reserved for future use.) * QFloat Intrinsic:: (Reserved for future use.) * QInt Intrinsic:: (Reserved for future use.) * QLog Intrinsic:: (Reserved for future use.) * QLog10 Intrinsic:: (Reserved for future use.) * QMax1 Intrinsic:: (Reserved for future use.) * QMin1 Intrinsic:: (Reserved for future use.) * QMod Intrinsic:: (Reserved for future use.) * QNInt Intrinsic:: (Reserved for future use.) * QSin Intrinsic:: (Reserved for future use.) * QSinD Intrinsic:: (Reserved for future use.) * QSinH Intrinsic:: (Reserved for future use.) * QSqRt Intrinsic:: (Reserved for future use.) * QTan Intrinsic:: (Reserved for future use.) * QTanD Intrinsic:: (Reserved for future use.) * QTanH Intrinsic:: (Reserved for future use.) * Rename Intrinsic (function):: Rename file. * Secnds Intrinsic:: Get local time offset since midnight. * Signal Intrinsic (function):: Muck with signal handling. * SinD Intrinsic:: (Reserved for future use.) * SnglQ Intrinsic:: (Reserved for future use.) * SymLnk Intrinsic (function):: Make symbolic link in file system. * System Intrinsic (function):: Invoke shell (system) command. * TanD Intrinsic:: (Reserved for future use.) * Time Intrinsic (VXT):: Get the time as a character value. * UMask Intrinsic (function):: Set file creation permissions mask. * Unlink Intrinsic (function):: Unlink file. * ZExt Intrinsic:: (Reserved for future use.)  File: g77.info, Node: ACosD Intrinsic, Next: AIMax0 Intrinsic, Up: Other Intrinsics ACosD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL ACosD' to use this name for an external procedure.  File: g77.info, Node: AIMax0 Intrinsic, Next: AIMin0 Intrinsic, Prev: ACosD Intrinsic, Up: Other Intrinsics AIMax0 Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL AIMax0' to use this name for an external procedure.  File: g77.info, Node: AIMin0 Intrinsic, Next: AJMax0 Intrinsic, Prev: AIMax0 Intrinsic, Up: Other Intrinsics AIMin0 Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL AIMin0' to use this name for an external procedure.  File: g77.info, Node: AJMax0 Intrinsic, Next: AJMin0 Intrinsic, Prev: AIMin0 Intrinsic, Up: Other Intrinsics AJMax0 Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL AJMax0' to use this name for an external procedure.  File: g77.info, Node: AJMin0 Intrinsic, Next: ASinD Intrinsic, Prev: AJMax0 Intrinsic, Up: Other Intrinsics AJMin0 Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL AJMin0' to use this name for an external procedure.  File: g77.info, Node: ASinD Intrinsic, Next: ATan2D Intrinsic, Prev: AJMin0 Intrinsic, Up: Other Intrinsics ASinD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL ASinD' to use this name for an external procedure.  File: g77.info, Node: ATan2D Intrinsic, Next: ATanD Intrinsic, Prev: ASinD Intrinsic, Up: Other Intrinsics ATan2D Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL ATan2D' to use this name for an external procedure.  File: g77.info, Node: ATanD Intrinsic, Next: BITest Intrinsic, Prev: ATan2D Intrinsic, Up: Other Intrinsics ATanD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL ATanD' to use this name for an external procedure.  File: g77.info, Node: BITest Intrinsic, Next: BJTest Intrinsic, Prev: ATanD Intrinsic, Up: Other Intrinsics BITest Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL BITest' to use this name for an external procedure.  File: g77.info, Node: BJTest Intrinsic, Next: CDAbs Intrinsic, Prev: BITest Intrinsic, Up: Other Intrinsics BJTest Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL BJTest' to use this name for an external procedure.  File: g77.info, Node: CDAbs Intrinsic, Next: CDCos Intrinsic, Prev: BJTest Intrinsic, Up: Other Intrinsics CDAbs Intrinsic ............... CDAbs(A) CDAbs: `REAL(KIND=2)' function. A: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `ABS()' that is specific to one type for A. *Note Abs Intrinsic::.  File: g77.info, Node: CDCos Intrinsic, Next: CDExp Intrinsic, Prev: CDAbs Intrinsic, Up: Other Intrinsics CDCos Intrinsic ............... CDCos(X) CDCos: `COMPLEX(KIND=2)' function. X: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `COS()' that is specific to one type for X. *Note Cos Intrinsic::.  File: g77.info, Node: CDExp Intrinsic, Next: CDLog Intrinsic, Prev: CDCos Intrinsic, Up: Other Intrinsics CDExp Intrinsic ............... CDExp(X) CDExp: `COMPLEX(KIND=2)' function. X: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `EXP()' that is specific to one type for X. *Note Exp Intrinsic::.  File: g77.info, Node: CDLog Intrinsic, Next: CDSin Intrinsic, Prev: CDExp Intrinsic, Up: Other Intrinsics CDLog Intrinsic ............... CDLog(X) CDLog: `COMPLEX(KIND=2)' function. X: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `LOG()' that is specific to one type for X. *Note Log Intrinsic::.  File: g77.info, Node: CDSin Intrinsic, Next: CDSqRt Intrinsic, Prev: CDLog Intrinsic, Up: Other Intrinsics CDSin Intrinsic ............... CDSin(X) CDSin: `COMPLEX(KIND=2)' function. X: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `SIN()' that is specific to one type for X. *Note Sin Intrinsic::.  File: g77.info, Node: CDSqRt Intrinsic, Next: ChDir Intrinsic (function), Prev: CDSin Intrinsic, Up: Other Intrinsics CDSqRt Intrinsic ................ CDSqRt(X) CDSqRt: `COMPLEX(KIND=2)' function. X: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `SQRT()' that is specific to one type for X. *Note SqRt Intrinsic::.  File: g77.info, Node: ChDir Intrinsic (function), Next: ChMod Intrinsic (function), Prev: CDSqRt Intrinsic, Up: Other Intrinsics ChDir Intrinsic (function) .......................... ChDir(DIR) ChDir: `INTEGER(KIND=1)' function. DIR: `CHARACTER'; scalar; INTENT(IN). Intrinsic groups: `badu77'. Description: Sets the current working directory to be DIR. Returns 0 on success or a non-zero error code. See `chdir(3)'. _Caution:_ Using this routine during I/O to a unit connected with a non-absolute file name can cause subsequent I/O on such a unit to fail because the I/O library might reopen files by name. Due to the side effects performed by this intrinsic, the function form is not recommended. For information on other intrinsics with the same name: *Note ChDir Intrinsic (subroutine)::.  File: g77.info, Node: ChMod Intrinsic (function), Next: CosD Intrinsic, Prev: ChDir Intrinsic (function), Up: Other Intrinsics ChMod Intrinsic (function) .......................... ChMod(NAME, MODE) ChMod: `INTEGER(KIND=1)' function. NAME: `CHARACTER'; scalar; INTENT(IN). MODE: `CHARACTER'; scalar; INTENT(IN). Intrinsic groups: `badu77'. Description: Changes the access mode of file NAME according to the specification MODE, which is given in the format of `chmod(1)'. A null character (`CHAR(0)') marks the end of the name in NAME--otherwise, trailing blanks in NAME are ignored. Currently, NAME must not contain the single quote character. Returns 0 on success or a non-zero error code otherwise. Note that this currently works by actually invoking `/bin/chmod' (or the `chmod' found when the library was configured) and so might fail in some circumstances and will, anyway, be slow. Due to the side effects performed by this intrinsic, the function form is not recommended. For information on other intrinsics with the same name: *Note ChMod Intrinsic (subroutine)::.  File: g77.info, Node: CosD Intrinsic, Next: DACosD Intrinsic, Prev: ChMod Intrinsic (function), Up: Other Intrinsics CosD Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL CosD' to use this name for an external procedure.  File: g77.info, Node: DACosD Intrinsic, Next: DASinD Intrinsic, Prev: CosD Intrinsic, Up: Other Intrinsics DACosD Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DACosD' to use this name for an external procedure.  File: g77.info, Node: DASinD Intrinsic, Next: DATan2D Intrinsic, Prev: DACosD Intrinsic, Up: Other Intrinsics DASinD Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DASinD' to use this name for an external procedure.  File: g77.info, Node: DATan2D Intrinsic, Next: DATanD Intrinsic, Prev: DASinD Intrinsic, Up: Other Intrinsics DATan2D Intrinsic ................. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DATan2D' to use this name for an external procedure.  File: g77.info, Node: DATanD Intrinsic, Next: Date Intrinsic, Prev: DATan2D Intrinsic, Up: Other Intrinsics DATanD Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DATanD' to use this name for an external procedure.  File: g77.info, Node: Date Intrinsic, Next: DbleQ Intrinsic, Prev: DATanD Intrinsic, Up: Other Intrinsics Date Intrinsic .............. CALL Date(DATE) DATE: `CHARACTER'; scalar; INTENT(OUT). Intrinsic groups: `vxt'. Description: Returns DATE in the form `DD-MMM-YY', representing the numeric day of the month DD, a three-character abbreviation of the month name MMM and the last two digits of the year YY, e.g. `25-Nov-96'. This intrinsic is not recommended, due to the year 2000 approaching. Therefore, programs making use of this intrinsic might not be Year 2000 (Y2K) compliant. *Note CTime Intrinsic (subroutine)::, for information on obtaining more digits for the current (or any) date.  File: g77.info, Node: DbleQ Intrinsic, Next: DCmplx Intrinsic, Prev: Date Intrinsic, Up: Other Intrinsics DbleQ Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DbleQ' to use this name for an external procedure.  File: g77.info, Node: DCmplx Intrinsic, Next: DConjg Intrinsic, Prev: DbleQ Intrinsic, Up: Other Intrinsics DCmplx Intrinsic ................ DCmplx(X, Y) DCmplx: `COMPLEX(KIND=2)' function. X: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN). Y: `INTEGER' or `REAL'; OPTIONAL (must be omitted if X is `COMPLEX'); scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: If X is not type `COMPLEX', constructs a value of type `COMPLEX(KIND=2)' from the real and imaginary values specified by X and Y, respectively. If Y is omitted, `0D0' is assumed. If X is type `COMPLEX', converts it to type `COMPLEX(KIND=2)'. Although this intrinsic is not standard Fortran, it is a popular extension offered by many compilers that support `DOUBLE COMPLEX', since it offers the easiest way to convert to `DOUBLE COMPLEX' without using Fortran 90 features (such as the `KIND=' argument to the `CMPLX()' intrinsic). (`CMPLX(0D0, 0D0)' returns a single-precision `COMPLEX' result, as required by standard FORTRAN 77. That's why so many compilers provide `DCMPLX()', since `DCMPLX(0D0, 0D0)' returns a `DOUBLE COMPLEX' result. Still, `DCMPLX()' converts even `REAL*16' arguments to their `REAL*8' equivalents in most dialects of Fortran, so neither it nor `CMPLX()' allow easy construction of arbitrary-precision values without potentially forcing a conversion involving extending or reducing precision. GNU Fortran provides such an intrinsic, called `COMPLEX()'.) *Note Complex Intrinsic::, for information on easily constructing a `COMPLEX' value of arbitrary precision from `REAL' arguments.  File: g77.info, Node: DConjg Intrinsic, Next: DCosD Intrinsic, Prev: DCmplx Intrinsic, Up: Other Intrinsics DConjg Intrinsic ................ DConjg(Z) DConjg: `COMPLEX(KIND=2)' function. Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `CONJG()' that is specific to one type for Z. *Note Conjg Intrinsic::.  File: g77.info, Node: DCosD Intrinsic, Next: DFloat Intrinsic, Prev: DConjg Intrinsic, Up: Other Intrinsics DCosD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DCosD' to use this name for an external procedure.  File: g77.info, Node: DFloat Intrinsic, Next: DFlotI Intrinsic, Prev: DCosD Intrinsic, Up: Other Intrinsics DFloat Intrinsic ................ DFloat(A) DFloat: `REAL(KIND=2)' function. A: `INTEGER'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `REAL()' that is specific to one type for A. *Note Real Intrinsic::.  File: g77.info, Node: DFlotI Intrinsic, Next: DFlotJ Intrinsic, Prev: DFloat Intrinsic, Up: Other Intrinsics DFlotI Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DFlotI' to use this name for an external procedure.  File: g77.info, Node: DFlotJ Intrinsic, Next: DImag Intrinsic, Prev: DFlotI Intrinsic, Up: Other Intrinsics DFlotJ Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DFlotJ' to use this name for an external procedure.  File: g77.info, Node: DImag Intrinsic, Next: DReal Intrinsic, Prev: DFlotJ Intrinsic, Up: Other Intrinsics DImag Intrinsic ............... DImag(Z) DImag: `REAL(KIND=2)' function. Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN). Intrinsic groups: `f2c', `vxt'. Description: Archaic form of `AIMAG()' that is specific to one type for Z. *Note AImag Intrinsic::.  File: g77.info, Node: DReal Intrinsic, Next: DSinD Intrinsic, Prev: DImag Intrinsic, Up: Other Intrinsics DReal Intrinsic ............... DReal(A) DReal: `REAL(KIND=2)' function. A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN). Intrinsic groups: `vxt'. Description: Converts A to `REAL(KIND=2)'. If A is type `COMPLEX', its real part is converted (if necessary) to `REAL(KIND=2)', and its imaginary part is disregarded. Although this intrinsic is not standard Fortran, it is a popular extension offered by many compilers that support `DOUBLE COMPLEX', since it offers the easiest way to extract the real part of a `DOUBLE COMPLEX' value without using the Fortran 90 `REAL()' intrinsic in a way that produces a return value inconsistent with the way many FORTRAN 77 compilers handle `REAL()' of a `DOUBLE COMPLEX' value. *Note RealPart Intrinsic::, for information on a GNU Fortran intrinsic that avoids these areas of confusion. *Note Dble Intrinsic::, for information on the standard FORTRAN 77 replacement for `DREAL()'. *Note REAL() and AIMAG() of Complex::, for more information on this issue.  File: g77.info, Node: DSinD Intrinsic, Next: DTanD Intrinsic, Prev: DReal Intrinsic, Up: Other Intrinsics DSinD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DSinD' to use this name for an external procedure.  File: g77.info, Node: DTanD Intrinsic, Next: DTime Intrinsic (function), Prev: DSinD Intrinsic, Up: Other Intrinsics DTanD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL DTanD' to use this name for an external procedure.  File: g77.info, Node: DTime Intrinsic (function), Next: FGet Intrinsic (function), Prev: DTanD Intrinsic, Up: Other Intrinsics DTime Intrinsic (function) .......................... DTime(TARRAY) DTime: `REAL(KIND=1)' function. TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT). Intrinsic groups: `badu77'. Description: Initially, return the number of seconds of runtime since the start of the process's execution as the function value, and the user and system components of this in `TARRAY(1)' and `TARRAY(2)' respectively. The functions' value is equal to `TARRAY(1) + TARRAY(2)'. Subsequent invocations of `DTIME()' return values accumulated since the previous invocation. On some systems, the underlying timings are represented using types with sufficiently small limits that overflows (wraparounds) are possible, such as 32-bit types. Therefore, the values returned by this intrinsic might be, or become, negative, or numerically less than previous values, during a single run of the compiled program. Due to the side effects performed by this intrinsic, the function form is not recommended. For information on other intrinsics with the same name: *Note DTime Intrinsic (subroutine)::.  File: g77.info, Node: FGet Intrinsic (function), Next: FGetC Intrinsic (function), Prev: DTime Intrinsic (function), Up: Other Intrinsics FGet Intrinsic (function) ......................... FGet(C) FGet: `INTEGER(KIND=1)' function. C: `CHARACTER'; scalar; INTENT(OUT). Intrinsic groups: `badu77'. Description: Reads a single character into C in stream mode from unit 5 (by-passing normal formatted input) using `getc(3)'. Returns 0 on success, -1 on end-of-file, and the error code from `ferror(3)' otherwise. Stream I/O should not be mixed with normal record-oriented (formatted or unformatted) I/O on the same unit; the results are unpredictable. For information on other intrinsics with the same name: *Note FGet Intrinsic (subroutine)::.  File: g77.info, Node: FGetC Intrinsic (function), Next: FloatI Intrinsic, Prev: FGet Intrinsic (function), Up: Other Intrinsics FGetC Intrinsic (function) .......................... FGetC(UNIT, C) FGetC: `INTEGER(KIND=1)' function. UNIT: `INTEGER'; scalar; INTENT(IN). C: `CHARACTER'; scalar; INTENT(OUT). Intrinsic groups: `badu77'. Description: Reads a single character into C in stream mode from unit UNIT (by-passing normal formatted output) using `getc(3)'. Returns 0 on success, -1 on end-of-file, and the error code from `ferror(3)' otherwise. Stream I/O should not be mixed with normal record-oriented (formatted or unformatted) I/O on the same unit; the results are unpredictable. For information on other intrinsics with the same name: *Note FGetC Intrinsic (subroutine)::.  File: g77.info, Node: FloatI Intrinsic, Next: FloatJ Intrinsic, Prev: FGetC Intrinsic (function), Up: Other Intrinsics FloatI Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL FloatI' to use this name for an external procedure.  File: g77.info, Node: FloatJ Intrinsic, Next: FPut Intrinsic (function), Prev: FloatI Intrinsic, Up: Other Intrinsics FloatJ Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL FloatJ' to use this name for an external procedure.  File: g77.info, Node: FPut Intrinsic (function), Next: FPutC Intrinsic (function), Prev: FloatJ Intrinsic, Up: Other Intrinsics FPut Intrinsic (function) ......................... FPut(C) FPut: `INTEGER(KIND=1)' function. C: `CHARACTER'; scalar; INTENT(IN). Intrinsic groups: `badu77'. Description: Writes the single character C in stream mode to unit 6 (by-passing normal formatted output) using `getc(3)'. Returns 0 on success, the error code from `ferror(3)' otherwise. Stream I/O should not be mixed with normal record-oriented (formatted or unformatted) I/O on the same unit; the results are unpredictable. For information on other intrinsics with the same name: *Note FPut Intrinsic (subroutine)::.  File: g77.info, Node: FPutC Intrinsic (function), Next: IDate Intrinsic (VXT), Prev: FPut Intrinsic (function), Up: Other Intrinsics FPutC Intrinsic (function) .......................... FPutC(UNIT, C) FPutC: `INTEGER(KIND=1)' function. UNIT: `INTEGER'; scalar; INTENT(IN). C: `CHARACTER'; scalar; INTENT(IN). Intrinsic groups: `badu77'. Description: Writes the single character C in stream mode to unit UNIT (by-passing normal formatted output) using `putc(3)'. Returns 0 on success, the error code from `ferror(3)' otherwise. Stream I/O should not be mixed with normal record-oriented (formatted or unformatted) I/O on the same unit; the results are unpredictable. For information on other intrinsics with the same name: *Note FPutC Intrinsic (subroutine)::.  File: g77.info, Node: IDate Intrinsic (VXT), Next: IIAbs Intrinsic, Prev: FPutC Intrinsic (function), Up: Other Intrinsics IDate Intrinsic (VXT) ..................... CALL IDate(M, D, Y) M: `INTEGER(KIND=1)'; scalar; INTENT(OUT). D: `INTEGER(KIND=1)'; scalar; INTENT(OUT). Y: `INTEGER(KIND=1)'; scalar; INTENT(OUT). Intrinsic groups: `vxt'. Description: Returns the numerical values of the current local time. The month (in the range 1-12) is returned in M, the day (in the range 1-7) in D, and the year in Y (in the range 0-99). This intrinsic is not recommended, due to the year 2000 approaching. Therefore, programs making use of this intrinsic might not be Year 2000 (Y2K) compliant. For example, the date might appear, to such programs, to wrap around (change from a larger value to a smaller one) as of the Year 2000. *Note IDate Intrinsic (UNIX)::, for information on obtaining more digits for the current date. For information on other intrinsics with the same name: *Note IDate Intrinsic (UNIX)::.  File: g77.info, Node: IIAbs Intrinsic, Next: IIAnd Intrinsic, Prev: IDate Intrinsic (VXT), Up: Other Intrinsics IIAbs Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIAbs' to use this name for an external procedure.  File: g77.info, Node: IIAnd Intrinsic, Next: IIBClr Intrinsic, Prev: IIAbs Intrinsic, Up: Other Intrinsics IIAnd Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIAnd' to use this name for an external procedure.  File: g77.info, Node: IIBClr Intrinsic, Next: IIBits Intrinsic, Prev: IIAnd Intrinsic, Up: Other Intrinsics IIBClr Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIBClr' to use this name for an external procedure.  File: g77.info, Node: IIBits Intrinsic, Next: IIBSet Intrinsic, Prev: IIBClr Intrinsic, Up: Other Intrinsics IIBits Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIBits' to use this name for an external procedure.  File: g77.info, Node: IIBSet Intrinsic, Next: IIDiM Intrinsic, Prev: IIBits Intrinsic, Up: Other Intrinsics IIBSet Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIBSet' to use this name for an external procedure.  File: g77.info, Node: IIDiM Intrinsic, Next: IIDInt Intrinsic, Prev: IIBSet Intrinsic, Up: Other Intrinsics IIDiM Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIDiM' to use this name for an external procedure.  File: g77.info, Node: IIDInt Intrinsic, Next: IIDNnt Intrinsic, Prev: IIDiM Intrinsic, Up: Other Intrinsics IIDInt Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIDInt' to use this name for an external procedure.  File: g77.info, Node: IIDNnt Intrinsic, Next: IIEOr Intrinsic, Prev: IIDInt Intrinsic, Up: Other Intrinsics IIDNnt Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIDNnt' to use this name for an external procedure.  File: g77.info, Node: IIEOr Intrinsic, Next: IIFix Intrinsic, Prev: IIDNnt Intrinsic, Up: Other Intrinsics IIEOr Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIEOr' to use this name for an external procedure.  File: g77.info, Node: IIFix Intrinsic, Next: IInt Intrinsic, Prev: IIEOr Intrinsic, Up: Other Intrinsics IIFix Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIFix' to use this name for an external procedure.  File: g77.info, Node: IInt Intrinsic, Next: IIOr Intrinsic, Prev: IIFix Intrinsic, Up: Other Intrinsics IInt Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IInt' to use this name for an external procedure.  File: g77.info, Node: IIOr Intrinsic, Next: IIQint Intrinsic, Prev: IInt Intrinsic, Up: Other Intrinsics IIOr Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIOr' to use this name for an external procedure.  File: g77.info, Node: IIQint Intrinsic, Next: IIQNnt Intrinsic, Prev: IIOr Intrinsic, Up: Other Intrinsics IIQint Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIQint' to use this name for an external procedure.  File: g77.info, Node: IIQNnt Intrinsic, Next: IIShftC Intrinsic, Prev: IIQint Intrinsic, Up: Other Intrinsics IIQNnt Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIQNnt' to use this name for an external procedure.  File: g77.info, Node: IIShftC Intrinsic, Next: IISign Intrinsic, Prev: IIQNnt Intrinsic, Up: Other Intrinsics IIShftC Intrinsic ................. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IIShftC' to use this name for an external procedure.  File: g77.info, Node: IISign Intrinsic, Next: IMax0 Intrinsic, Prev: IIShftC Intrinsic, Up: Other Intrinsics IISign Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IISign' to use this name for an external procedure.  File: g77.info, Node: IMax0 Intrinsic, Next: IMax1 Intrinsic, Prev: IISign Intrinsic, Up: Other Intrinsics IMax0 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IMax0' to use this name for an external procedure.  File: g77.info, Node: IMax1 Intrinsic, Next: IMin0 Intrinsic, Prev: IMax0 Intrinsic, Up: Other Intrinsics IMax1 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IMax1' to use this name for an external procedure.  File: g77.info, Node: IMin0 Intrinsic, Next: IMin1 Intrinsic, Prev: IMax1 Intrinsic, Up: Other Intrinsics IMin0 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IMin0' to use this name for an external procedure.  File: g77.info, Node: IMin1 Intrinsic, Next: IMod Intrinsic, Prev: IMin0 Intrinsic, Up: Other Intrinsics IMin1 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IMin1' to use this name for an external procedure.  File: g77.info, Node: IMod Intrinsic, Next: INInt Intrinsic, Prev: IMin1 Intrinsic, Up: Other Intrinsics IMod Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IMod' to use this name for an external procedure.  File: g77.info, Node: INInt Intrinsic, Next: INot Intrinsic, Prev: IMod Intrinsic, Up: Other Intrinsics INInt Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL INInt' to use this name for an external procedure.  File: g77.info, Node: INot Intrinsic, Next: IZExt Intrinsic, Prev: INInt Intrinsic, Up: Other Intrinsics INot Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL INot' to use this name for an external procedure.  File: g77.info, Node: IZExt Intrinsic, Next: JIAbs Intrinsic, Prev: INot Intrinsic, Up: Other Intrinsics IZExt Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL IZExt' to use this name for an external procedure.  File: g77.info, Node: JIAbs Intrinsic, Next: JIAnd Intrinsic, Prev: IZExt Intrinsic, Up: Other Intrinsics JIAbs Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIAbs' to use this name for an external procedure.  File: g77.info, Node: JIAnd Intrinsic, Next: JIBClr Intrinsic, Prev: JIAbs Intrinsic, Up: Other Intrinsics JIAnd Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIAnd' to use this name for an external procedure.  File: g77.info, Node: JIBClr Intrinsic, Next: JIBits Intrinsic, Prev: JIAnd Intrinsic, Up: Other Intrinsics JIBClr Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIBClr' to use this name for an external procedure.  File: g77.info, Node: JIBits Intrinsic, Next: JIBSet Intrinsic, Prev: JIBClr Intrinsic, Up: Other Intrinsics JIBits Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIBits' to use this name for an external procedure.  File: g77.info, Node: JIBSet Intrinsic, Next: JIDiM Intrinsic, Prev: JIBits Intrinsic, Up: Other Intrinsics JIBSet Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIBSet' to use this name for an external procedure.  File: g77.info, Node: JIDiM Intrinsic, Next: JIDInt Intrinsic, Prev: JIBSet Intrinsic, Up: Other Intrinsics JIDiM Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIDiM' to use this name for an external procedure.  File: g77.info, Node: JIDInt Intrinsic, Next: JIDNnt Intrinsic, Prev: JIDiM Intrinsic, Up: Other Intrinsics JIDInt Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIDInt' to use this name for an external procedure.  File: g77.info, Node: JIDNnt Intrinsic, Next: JIEOr Intrinsic, Prev: JIDInt Intrinsic, Up: Other Intrinsics JIDNnt Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIDNnt' to use this name for an external procedure.  File: g77.info, Node: JIEOr Intrinsic, Next: JIFix Intrinsic, Prev: JIDNnt Intrinsic, Up: Other Intrinsics JIEOr Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIEOr' to use this name for an external procedure.  File: g77.info, Node: JIFix Intrinsic, Next: JInt Intrinsic, Prev: JIEOr Intrinsic, Up: Other Intrinsics JIFix Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIFix' to use this name for an external procedure.  File: g77.info, Node: JInt Intrinsic, Next: JIOr Intrinsic, Prev: JIFix Intrinsic, Up: Other Intrinsics JInt Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JInt' to use this name for an external procedure.  File: g77.info, Node: JIOr Intrinsic, Next: JIQint Intrinsic, Prev: JInt Intrinsic, Up: Other Intrinsics JIOr Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIOr' to use this name for an external procedure.  File: g77.info, Node: JIQint Intrinsic, Next: JIQNnt Intrinsic, Prev: JIOr Intrinsic, Up: Other Intrinsics JIQint Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIQint' to use this name for an external procedure.  File: g77.info, Node: JIQNnt Intrinsic, Next: JIShft Intrinsic, Prev: JIQint Intrinsic, Up: Other Intrinsics JIQNnt Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIQNnt' to use this name for an external procedure.  File: g77.info, Node: JIShft Intrinsic, Next: JIShftC Intrinsic, Prev: JIQNnt Intrinsic, Up: Other Intrinsics JIShft Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIShft' to use this name for an external procedure.  File: g77.info, Node: JIShftC Intrinsic, Next: JISign Intrinsic, Prev: JIShft Intrinsic, Up: Other Intrinsics JIShftC Intrinsic ................. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JIShftC' to use this name for an external procedure.  File: g77.info, Node: JISign Intrinsic, Next: JMax0 Intrinsic, Prev: JIShftC Intrinsic, Up: Other Intrinsics JISign Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JISign' to use this name for an external procedure.  File: g77.info, Node: JMax0 Intrinsic, Next: JMax1 Intrinsic, Prev: JISign Intrinsic, Up: Other Intrinsics JMax0 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JMax0' to use this name for an external procedure.  File: g77.info, Node: JMax1 Intrinsic, Next: JMin0 Intrinsic, Prev: JMax0 Intrinsic, Up: Other Intrinsics JMax1 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JMax1' to use this name for an external procedure.  File: g77.info, Node: JMin0 Intrinsic, Next: JMin1 Intrinsic, Prev: JMax1 Intrinsic, Up: Other Intrinsics JMin0 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JMin0' to use this name for an external procedure.  File: g77.info, Node: JMin1 Intrinsic, Next: JMod Intrinsic, Prev: JMin0 Intrinsic, Up: Other Intrinsics JMin1 Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JMin1' to use this name for an external procedure.  File: g77.info, Node: JMod Intrinsic, Next: JNInt Intrinsic, Prev: JMin1 Intrinsic, Up: Other Intrinsics JMod Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JMod' to use this name for an external procedure.  File: g77.info, Node: JNInt Intrinsic, Next: JNot Intrinsic, Prev: JMod Intrinsic, Up: Other Intrinsics JNInt Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JNInt' to use this name for an external procedure.  File: g77.info, Node: JNot Intrinsic, Next: JZExt Intrinsic, Prev: JNInt Intrinsic, Up: Other Intrinsics JNot Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JNot' to use this name for an external procedure.  File: g77.info, Node: JZExt Intrinsic, Next: Kill Intrinsic (function), Prev: JNot Intrinsic, Up: Other Intrinsics JZExt Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL JZExt' to use this name for an external procedure.  File: g77.info, Node: Kill Intrinsic (function), Next: Link Intrinsic (function), Prev: JZExt Intrinsic, Up: Other Intrinsics Kill Intrinsic (function) ......................... Kill(PID, SIGNAL) Kill: `INTEGER(KIND=1)' function. PID: `INTEGER'; scalar; INTENT(IN). SIGNAL: `INTEGER'; scalar; INTENT(IN). Intrinsic groups: `badu77'. Description: Sends the signal specified by SIGNAL to the process PID. Returns 0 on success or a non-zero error code. See `kill(2)'. Due to the side effects performed by this intrinsic, the function form is not recommended. For information on other intrinsics with the same name: *Note Kill Intrinsic (subroutine)::.  File: g77.info, Node: Link Intrinsic (function), Next: QAbs Intrinsic, Prev: Kill Intrinsic (function), Up: Other Intrinsics Link Intrinsic (function) ......................... Link(PATH1, PATH2) Link: `INTEGER(KIND=1)' function. PATH1: `CHARACTER'; scalar; INTENT(IN). PATH2: `CHARACTER'; scalar; INTENT(IN). Intrinsic groups: `badu77'. Description: Makes a (hard) link from file PATH1 to PATH2. A null character (`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise, trailing blanks in PATH1 and PATH2 are ignored. Returns 0 on success or a non-zero error code. See `link(2)'. Due to the side effects performed by this intrinsic, the function form is not recommended. For information on other intrinsics with the same name: *Note Link Intrinsic (subroutine)::.  File: g77.info, Node: QAbs Intrinsic, Next: QACos Intrinsic, Prev: Link Intrinsic (function), Up: Other Intrinsics QAbs Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QAbs' to use this name for an external procedure.  File: g77.info, Node: QACos Intrinsic, Next: QACosD Intrinsic, Prev: QAbs Intrinsic, Up: Other Intrinsics QACos Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QACos' to use this name for an external procedure.  File: g77.info, Node: QACosD Intrinsic, Next: QASin Intrinsic, Prev: QACos Intrinsic, Up: Other Intrinsics QACosD Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QACosD' to use this name for an external procedure.  File: g77.info, Node: QASin Intrinsic, Next: QASinD Intrinsic, Prev: QACosD Intrinsic, Up: Other Intrinsics QASin Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QASin' to use this name for an external procedure.  File: g77.info, Node: QASinD Intrinsic, Next: QATan Intrinsic, Prev: QASin Intrinsic, Up: Other Intrinsics QASinD Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QASinD' to use this name for an external procedure.  File: g77.info, Node: QATan Intrinsic, Next: QATan2 Intrinsic, Prev: QASinD Intrinsic, Up: Other Intrinsics QATan Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QATan' to use this name for an external procedure.  File: g77.info, Node: QATan2 Intrinsic, Next: QATan2D Intrinsic, Prev: QATan Intrinsic, Up: Other Intrinsics QATan2 Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QATan2' to use this name for an external procedure.  File: g77.info, Node: QATan2D Intrinsic, Next: QATanD Intrinsic, Prev: QATan2 Intrinsic, Up: Other Intrinsics QATan2D Intrinsic ................. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QATan2D' to use this name for an external procedure.  File: g77.info, Node: QATanD Intrinsic, Next: QCos Intrinsic, Prev: QATan2D Intrinsic, Up: Other Intrinsics QATanD Intrinsic ................ This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QATanD' to use this name for an external procedure.  File: g77.info, Node: QCos Intrinsic, Next: QCosD Intrinsic, Prev: QATanD Intrinsic, Up: Other Intrinsics QCos Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QCos' to use this name for an external procedure.  File: g77.info, Node: QCosD Intrinsic, Next: QCosH Intrinsic, Prev: QCos Intrinsic, Up: Other Intrinsics QCosD Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QCosD' to use this name for an external procedure.  File: g77.info, Node: QCosH Intrinsic, Next: QDiM Intrinsic, Prev: QCosD Intrinsic, Up: Other Intrinsics QCosH Intrinsic ............... This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QCosH' to use this name for an external procedure.  File: g77.info, Node: QDiM Intrinsic, Next: QExp Intrinsic, Prev: QCosH Intrinsic, Up: Other Intrinsics QDiM Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QDiM' to use this name for an external procedure.  File: g77.info, Node: QExp Intrinsic, Next: QExt Intrinsic, Prev: QDiM Intrinsic, Up: Other Intrinsics QExp Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QExp' to use this name for an external procedure.  File: g77.info, Node: QExt Intrinsic, Next: QExtD Intrinsic, Prev: QExp Intrinsic, Up: Other Intrinsics QExt Intrinsic .............. This intrinsic is not yet implemented. The name is, however, reserved as an intrinsic. Use `EXTERNAL QExt' to use this name for an external procedure.