X-Git-Url: https://oss.titaniummirror.com/gitweb?a=blobdiff_plain;f=gcc%2Fdoc%2Fcppinternals.info;fp=gcc%2Fdoc%2Fcppinternals.info;h=0000000000000000000000000000000000000000;hb=37aa8acf60b5c7701cab3d702d2900ca69af7853;hp=38e4979f4ef3bf7a535ca0317b63fecf346cff03;hpb=f12c34b7eaf869b6568b3123727d014202d066e2;p=msp430-gcc.git diff --git a/gcc/doc/cppinternals.info b/gcc/doc/cppinternals.info deleted file mode 100644 index 38e4979f..00000000 --- a/gcc/doc/cppinternals.info +++ /dev/null @@ -1,1036 +0,0 @@ -This is doc/cppinternals.info, produced by makeinfo version 4.13 from -/d/gcc-4.4.3/gcc-4.4.3/gcc/doc/cppinternals.texi. - -INFO-DIR-SECTION Software development -START-INFO-DIR-ENTRY -* Cpplib: (cppinternals). Cpplib internals. -END-INFO-DIR-ENTRY - - This file documents the internals of the GNU C Preprocessor. - - Copyright 2000, 2001, 2002, 2004, 2005, 2006, 2007 Free Software -Foundation, Inc. - - Permission is granted to make and distribute verbatim copies of this -manual provided the copyright notice and this permission notice are -preserved on all copies. - - Permission is granted to copy and distribute modified versions of -this manual under the conditions for verbatim copying, provided also -that the entire resulting derived work is distributed under the terms -of a permission notice identical to this one. - - Permission is granted to copy and distribute translations of this -manual into another language, under the above conditions for modified -versions. - - -File: cppinternals.info, Node: Top, Next: Conventions, Up: (dir) - -The GNU C Preprocessor Internals -******************************** - -1 Cpplib--the GNU C Preprocessor -******************************** - -The GNU C preprocessor is implemented as a library, "cpplib", so it can -be easily shared between a stand-alone preprocessor, and a preprocessor -integrated with the C, C++ and Objective-C front ends. It is also -available for use by other programs, though this is not recommended as -its exposed interface has not yet reached a point of reasonable -stability. - - The library has been written to be re-entrant, so that it can be used -to preprocess many files simultaneously if necessary. It has also been -written with the preprocessing token as the fundamental unit; the -preprocessor in previous versions of GCC would operate on text strings -as the fundamental unit. - - This brief manual documents the internals of cpplib, and explains -some of the tricky issues. It is intended that, along with the -comments in the source code, a reasonably competent C programmer should -be able to figure out what the code is doing, and why things have been -implemented the way they have. - -* Menu: - -* Conventions:: Conventions used in the code. -* Lexer:: The combined C, C++ and Objective-C Lexer. -* Hash Nodes:: All identifiers are entered into a hash table. -* Macro Expansion:: Macro expansion algorithm. -* Token Spacing:: Spacing and paste avoidance issues. -* Line Numbering:: Tracking location within files. -* Guard Macros:: Optimizing header files with guard macros. -* Files:: File handling. -* Concept Index:: Index. - - -File: cppinternals.info, Node: Conventions, Next: Lexer, Prev: Top, Up: Top - -Conventions -*********** - -cpplib has two interfaces--one is exposed internally only, and the -other is for both internal and external use. - - The convention is that functions and types that are exposed to -multiple files internally are prefixed with `_cpp_', and are to be -found in the file `internal.h'. Functions and types exposed to external -clients are in `cpplib.h', and prefixed with `cpp_'. For historical -reasons this is no longer quite true, but we should strive to stick to -it. - - We are striving to reduce the information exposed in `cpplib.h' to -the bare minimum necessary, and then to keep it there. This makes clear -exactly what external clients are entitled to assume, and allows us to -change internals in the future without worrying whether library clients -are perhaps relying on some kind of undocumented implementation-specific -behavior. - - -File: cppinternals.info, Node: Lexer, Next: Hash Nodes, Prev: Conventions, Up: Top - -The Lexer -********* - -Overview -======== - -The lexer is contained in the file `lex.c'. It is a hand-coded lexer, -and not implemented as a state machine. It can understand C, C++ and -Objective-C source code, and has been extended to allow reasonably -successful preprocessing of assembly language. The lexer does not make -an initial pass to strip out trigraphs and escaped newlines, but handles -them as they are encountered in a single pass of the input file. It -returns preprocessing tokens individually, not a line at a time. - - It is mostly transparent to users of the library, since the library's -interface for obtaining the next token, `cpp_get_token', takes care of -lexing new tokens, handling directives, and expanding macros as -necessary. However, the lexer does expose some functionality so that -clients of the library can easily spell a given token, such as -`cpp_spell_token' and `cpp_token_len'. These functions are useful when -generating diagnostics, and for emitting the preprocessed output. - -Lexing a token -============== - -Lexing of an individual token is handled by `_cpp_lex_direct' and its -subroutines. In its current form the code is quite complicated, with -read ahead characters and such-like, since it strives to not step back -in the character stream in preparation for handling non-ASCII file -encodings. The current plan is to convert any such files to UTF-8 -before processing them. This complexity is therefore unnecessary and -will be removed, so I'll not discuss it further here. - - The job of `_cpp_lex_direct' is simply to lex a token. It is not -responsible for issues like directive handling, returning lookahead -tokens directly, multiple-include optimization, or conditional block -skipping. It necessarily has a minor ro^le to play in memory -management of lexed lines. I discuss these issues in a separate section -(*note Lexing a line::). - - The lexer places the token it lexes into storage pointed to by the -variable `cur_token', and then increments it. This variable is -important for correct diagnostic positioning. Unless a specific line -and column are passed to the diagnostic routines, they will examine the -`line' and `col' values of the token just before the location that -`cur_token' points to, and use that location to report the diagnostic. - - The lexer does not consider whitespace to be a token in its own -right. If whitespace (other than a new line) precedes a token, it sets -the `PREV_WHITE' bit in the token's flags. Each token has its `line' -and `col' variables set to the line and column of the first character -of the token. This line number is the line number in the translation -unit, and can be converted to a source (file, line) pair using the line -map code. - - The first token on a logical, i.e. unescaped, line has the flag -`BOL' set for beginning-of-line. This flag is intended for internal -use, both to distinguish a `#' that begins a directive from one that -doesn't, and to generate a call-back to clients that want to be -notified about the start of every non-directive line with tokens on it. -Clients cannot reliably determine this for themselves: the first token -might be a macro, and the tokens of a macro expansion do not have the -`BOL' flag set. The macro expansion may even be empty, and the next -token on the line certainly won't have the `BOL' flag set. - - New lines are treated specially; exactly how the lexer handles them -is context-dependent. The C standard mandates that directives are -terminated by the first unescaped newline character, even if it appears -in the middle of a macro expansion. Therefore, if the state variable -`in_directive' is set, the lexer returns a `CPP_EOF' token, which is -normally used to indicate end-of-file, to indicate end-of-directive. -In a directive a `CPP_EOF' token never means end-of-file. -Conveniently, if the caller was `collect_args', it already handles -`CPP_EOF' as if it were end-of-file, and reports an error about an -unterminated macro argument list. - - The C standard also specifies that a new line in the middle of the -arguments to a macro is treated as whitespace. This white space is -important in case the macro argument is stringified. The state variable -`parsing_args' is nonzero when the preprocessor is collecting the -arguments to a macro call. It is set to 1 when looking for the opening -parenthesis to a function-like macro, and 2 when collecting the actual -arguments up to the closing parenthesis, since these two cases need to -be distinguished sometimes. One such time is here: the lexer sets the -`PREV_WHITE' flag of a token if it meets a new line when `parsing_args' -is set to 2. It doesn't set it if it meets a new line when -`parsing_args' is 1, since then code like - - #define foo() bar - foo - baz - -would be output with an erroneous space before `baz': - - foo - baz - - This is a good example of the subtlety of getting token spacing -correct in the preprocessor; there are plenty of tests in the testsuite -for corner cases like this. - - The lexer is written to treat each of `\r', `\n', `\r\n' and `\n\r' -as a single new line indicator. This allows it to transparently -preprocess MS-DOS, Macintosh and Unix files without their needing to -pass through a special filter beforehand. - - We also decided to treat a backslash, either `\' or the trigraph -`??/', separated from one of the above newline indicators by -non-comment whitespace only, as intending to escape the newline. It -tends to be a typing mistake, and cannot reasonably be mistaken for -anything else in any of the C-family grammars. Since handling it this -way is not strictly conforming to the ISO standard, the library issues a -warning wherever it encounters it. - - Handling newlines like this is made simpler by doing it in one place -only. The function `handle_newline' takes care of all newline -characters, and `skip_escaped_newlines' takes care of arbitrarily long -sequences of escaped newlines, deferring to `handle_newline' to handle -the newlines themselves. - - The most painful aspect of lexing ISO-standard C and C++ is handling -trigraphs and backlash-escaped newlines. Trigraphs are processed before -any interpretation of the meaning of a character is made, and -unfortunately there is a trigraph representation for a backslash, so it -is possible for the trigraph `??/' to introduce an escaped newline. - - Escaped newlines are tedious because theoretically they can occur -anywhere--between the `+' and `=' of the `+=' token, within the -characters of an identifier, and even between the `*' and `/' that -terminates a comment. Moreover, you cannot be sure there is just -one--there might be an arbitrarily long sequence of them. - - So, for example, the routine that lexes a number, `parse_number', -cannot assume that it can scan forwards until the first non-number -character and be done with it, because this could be the `\' -introducing an escaped newline, or the `?' introducing the trigraph -sequence that represents the `\' of an escaped newline. If it -encounters a `?' or `\', it calls `skip_escaped_newlines' to skip over -any potential escaped newlines before checking whether the number has -been finished. - - Similarly code in the main body of `_cpp_lex_direct' cannot simply -check for a `=' after a `+' character to determine whether it has a -`+=' token; it needs to be prepared for an escaped newline of some -sort. Such cases use the function `get_effective_char', which returns -the first character after any intervening escaped newlines. - - The lexer needs to keep track of the correct column position, -including counting tabs as specified by the `-ftabstop=' option. This -should be done even within C-style comments; they can appear in the -middle of a line, and we want to report diagnostics in the correct -position for text appearing after the end of the comment. - - Some identifiers, such as `__VA_ARGS__' and poisoned identifiers, -may be invalid and require a diagnostic. However, if they appear in a -macro expansion we don't want to complain with each use of the macro. -It is therefore best to catch them during the lexing stage, in -`parse_identifier'. In both cases, whether a diagnostic is needed or -not is dependent upon the lexer's state. For example, we don't want to -issue a diagnostic for re-poisoning a poisoned identifier, or for using -`__VA_ARGS__' in the expansion of a variable-argument macro. Therefore -`parse_identifier' makes use of state flags to determine whether a -diagnostic is appropriate. Since we change state on a per-token basis, -and don't lex whole lines at a time, this is not a problem. - - Another place where state flags are used to change behavior is whilst -lexing header names. Normally, a `<' would be lexed as a single token. -After a `#include' directive, though, it should be lexed as a single -token as far as the nearest `>' character. Note that we don't allow -the terminators of header names to be escaped; the first `"' or `>' -terminates the header name. - - Interpretation of some character sequences depends upon whether we -are lexing C, C++ or Objective-C, and on the revision of the standard in -force. For example, `::' is a single token in C++, but in C it is two -separate `:' tokens and almost certainly a syntax error. Such cases -are handled by `_cpp_lex_direct' based upon command-line flags stored -in the `cpp_options' structure. - - Once a token has been lexed, it leads an independent existence. The -spelling of numbers, identifiers and strings is copied to permanent -storage from the original input buffer, so a token remains valid and -correct even if its source buffer is freed with `_cpp_pop_buffer'. The -storage holding the spellings of such tokens remains until the client -program calls cpp_destroy, probably at the end of the translation unit. - -Lexing a line -============= - -When the preprocessor was changed to return pointers to tokens, one -feature I wanted was some sort of guarantee regarding how long a -returned pointer remains valid. This is important to the stand-alone -preprocessor, the future direction of the C family front ends, and even -to cpplib itself internally. - - Occasionally the preprocessor wants to be able to peek ahead in the -token stream. For example, after the name of a function-like macro, it -wants to check the next token to see if it is an opening parenthesis. -Another example is that, after reading the first few tokens of a -`#pragma' directive and not recognizing it as a registered pragma, it -wants to backtrack and allow the user-defined handler for unknown -pragmas to access the full `#pragma' token stream. The stand-alone -preprocessor wants to be able to test the current token with the -previous one to see if a space needs to be inserted to preserve their -separate tokenization upon re-lexing (paste avoidance), so it needs to -be sure the pointer to the previous token is still valid. The -recursive-descent C++ parser wants to be able to perform tentative -parsing arbitrarily far ahead in the token stream, and then to be able -to jump back to a prior position in that stream if necessary. - - The rule I chose, which is fairly natural, is to arrange that the -preprocessor lex all tokens on a line consecutively into a token buffer, -which I call a "token run", and when meeting an unescaped new line -(newlines within comments do not count either), to start lexing back at -the beginning of the run. Note that we do _not_ lex a line of tokens -at once; if we did that `parse_identifier' would not have state flags -available to warn about invalid identifiers (*note Invalid -identifiers::). - - In other words, accessing tokens that appeared earlier in the current -line is valid, but since each logical line overwrites the tokens of the -previous line, tokens from prior lines are unavailable. In particular, -since a directive only occupies a single logical line, this means that -the directive handlers like the `#pragma' handler can jump around in -the directive's tokens if necessary. - - Two issues remain: what about tokens that arise from macro -expansions, and what happens when we have a long line that overflows -the token run? - - Since we promise clients that we preserve the validity of pointers -that we have already returned for tokens that appeared earlier in the -line, we cannot reallocate the run. Instead, on overflow it is -expanded by chaining a new token run on to the end of the existing one. - - The tokens forming a macro's replacement list are collected by the -`#define' handler, and placed in storage that is only freed by -`cpp_destroy'. So if a macro is expanded in the line of tokens, the -pointers to the tokens of its expansion that are returned will always -remain valid. However, macros are a little trickier than that, since -they give rise to three sources of fresh tokens. They are the built-in -macros like `__LINE__', and the `#' and `##' operators for -stringification and token pasting. I handled this by allocating space -for these tokens from the lexer's token run chain. This means they -automatically receive the same lifetime guarantees as lexed tokens, and -we don't need to concern ourselves with freeing them. - - Lexing into a line of tokens solves some of the token memory -management issues, but not all. The opening parenthesis after a -function-like macro name might lie on a different line, and the front -ends definitely want the ability to look ahead past the end of the -current line. So cpplib only moves back to the start of the token run -at the end of a line if the variable `keep_tokens' is zero. -Line-buffering is quite natural for the preprocessor, and as a result -the only time cpplib needs to increment this variable is whilst looking -for the opening parenthesis to, and reading the arguments of, a -function-like macro. In the near future cpplib will export an -interface to increment and decrement this variable, so that clients can -share full control over the lifetime of token pointers too. - - The routine `_cpp_lex_token' handles moving to new token runs, -calling `_cpp_lex_direct' to lex new tokens, or returning -previously-lexed tokens if we stepped back in the token stream. It also -checks each token for the `BOL' flag, which might indicate a directive -that needs to be handled, or require a start-of-line call-back to be -made. `_cpp_lex_token' also handles skipping over tokens in failed -conditional blocks, and invalidates the control macro of the -multiple-include optimization if a token was successfully lexed outside -a directive. In other words, its callers do not need to concern -themselves with such issues. - - -File: cppinternals.info, Node: Hash Nodes, Next: Macro Expansion, Prev: Lexer, Up: Top - -Hash Nodes -********** - -When cpplib encounters an "identifier", it generates a hash code for it -and stores it in the hash table. By "identifier" we mean tokens with -type `CPP_NAME'; this includes identifiers in the usual C sense, as -well as keywords, directive names, macro names and so on. For example, -all of `pragma', `int', `foo' and `__GNUC__' are identifiers and hashed -when lexed. - - Each node in the hash table contain various information about the -identifier it represents. For example, its length and type. At any one -time, each identifier falls into exactly one of three categories: - - * Macros - - These have been declared to be macros, either on the command line - or with `#define'. A few, such as `__TIME__' are built-ins - entered in the hash table during initialization. The hash node - for a normal macro points to a structure with more information - about the macro, such as whether it is function-like, how many - arguments it takes, and its expansion. Built-in macros are - flagged as special, and instead contain an enum indicating which - of the various built-in macros it is. - - * Assertions - - Assertions are in a separate namespace to macros. To enforce - this, cpp actually prepends a `#' character before hashing and - entering it in the hash table. An assertion's node points to a - chain of answers to that assertion. - - * Void - - Everything else falls into this category--an identifier that is not - currently a macro, or a macro that has since been undefined with - `#undef'. - - When preprocessing C++, this category also includes the named - operators, such as `xor'. In expressions these behave like the - operators they represent, but in contexts where the spelling of a - token matters they are spelt differently. This spelling - distinction is relevant when they are operands of the stringizing - and pasting macro operators `#' and `##'. Named operator hash - nodes are flagged, both to catch the spelling distinction and to - prevent them from being defined as macros. - - The same identifiers share the same hash node. Since each identifier -token, after lexing, contains a pointer to its hash node, this is used -to provide rapid lookup of various information. For example, when -parsing a `#define' statement, CPP flags each argument's identifier -hash node with the index of that argument. This makes duplicated -argument checking an O(1) operation for each argument. Similarly, for -each identifier in the macro's expansion, lookup to see if it is an -argument, and which argument it is, is also an O(1) operation. Further, -each directive name, such as `endif', has an associated directive enum -stored in its hash node, so that directive lookup is also O(1). - - -File: cppinternals.info, Node: Macro Expansion, Next: Token Spacing, Prev: Hash Nodes, Up: Top - -Macro Expansion Algorithm -************************* - -Macro expansion is a tricky operation, fraught with nasty corner cases -and situations that render what you thought was a nifty way to optimize -the preprocessor's expansion algorithm wrong in quite subtle ways. - - I strongly recommend you have a good grasp of how the C and C++ -standards require macros to be expanded before diving into this -section, let alone the code!. If you don't have a clear mental picture -of how things like nested macro expansion, stringification and token -pasting are supposed to work, damage to your sanity can quickly result. - -Internal representation of macros -================================= - -The preprocessor stores macro expansions in tokenized form. This saves -repeated lexing passes during expansion, at the cost of a small -increase in memory consumption on average. The tokens are stored -contiguously in memory, so a pointer to the first one and a token count -is all you need to get the replacement list of a macro. - - If the macro is a function-like macro the preprocessor also stores -its parameters, in the form of an ordered list of pointers to the hash -table entry of each parameter's identifier. Further, in the macro's -stored expansion each occurrence of a parameter is replaced with a -special token of type `CPP_MACRO_ARG'. Each such token holds the index -of the parameter it represents in the parameter list, which allows -rapid replacement of parameters with their arguments during expansion. -Despite this optimization it is still necessary to store the original -parameters to the macro, both for dumping with e.g., `-dD', and to warn -about non-trivial macro redefinitions when the parameter names have -changed. - -Macro expansion overview -======================== - -The preprocessor maintains a "context stack", implemented as a linked -list of `cpp_context' structures, which together represent the macro -expansion state at any one time. The `struct cpp_reader' member -variable `context' points to the current top of this stack. The top -normally holds the unexpanded replacement list of the innermost macro -under expansion, except when cpplib is about to pre-expand an argument, -in which case it holds that argument's unexpanded tokens. - - When there are no macros under expansion, cpplib is in "base -context". All contexts other than the base context contain a -contiguous list of tokens delimited by a starting and ending token. -When not in base context, cpplib obtains the next token from the list -of the top context. If there are no tokens left in the list, it pops -that context off the stack, and subsequent ones if necessary, until an -unexhausted context is found or it returns to base context. In base -context, cpplib reads tokens directly from the lexer. - - If it encounters an identifier that is both a macro and enabled for -expansion, cpplib prepares to push a new context for that macro on the -stack by calling the routine `enter_macro_context'. When this routine -returns, the new context will contain the unexpanded tokens of the -replacement list of that macro. In the case of function-like macros, -`enter_macro_context' also replaces any parameters in the replacement -list, stored as `CPP_MACRO_ARG' tokens, with the appropriate macro -argument. If the standard requires that the parameter be replaced with -its expanded argument, the argument will have been fully macro expanded -first. - - `enter_macro_context' also handles special macros like `__LINE__'. -Although these macros expand to a single token which cannot contain any -further macros, for reasons of token spacing (*note Token Spacing::) -and simplicity of implementation, cpplib handles these special macros -by pushing a context containing just that one token. - - The final thing that `enter_macro_context' does before returning is -to mark the macro disabled for expansion (except for special macros -like `__TIME__'). The macro is re-enabled when its context is later -popped from the context stack, as described above. This strict -ordering ensures that a macro is disabled whilst its expansion is being -scanned, but that it is _not_ disabled whilst any arguments to it are -being expanded. - -Scanning the replacement list for macros to expand -================================================== - -The C standard states that, after any parameters have been replaced -with their possibly-expanded arguments, the replacement list is scanned -for nested macros. Further, any identifiers in the replacement list -that are not expanded during this scan are never again eligible for -expansion in the future, if the reason they were not expanded is that -the macro in question was disabled. - - Clearly this latter condition can only apply to tokens resulting from -argument pre-expansion. Other tokens never have an opportunity to be -re-tested for expansion. It is possible for identifiers that are -function-like macros to not expand initially but to expand during a -later scan. This occurs when the identifier is the last token of an -argument (and therefore originally followed by a comma or a closing -parenthesis in its macro's argument list), and when it replaces its -parameter in the macro's replacement list, the subsequent token happens -to be an opening parenthesis (itself possibly the first token of an -argument). - - It is important to note that when cpplib reads the last token of a -given context, that context still remains on the stack. Only when -looking for the _next_ token do we pop it off the stack and drop to a -lower context. This makes backing up by one token easy, but more -importantly ensures that the macro corresponding to the current context -is still disabled when we are considering the last token of its -replacement list for expansion (or indeed expanding it). As an -example, which illustrates many of the points above, consider - - #define foo(x) bar x - foo(foo) (2) - -which fully expands to `bar foo (2)'. During pre-expansion of the -argument, `foo' does not expand even though the macro is enabled, since -it has no following parenthesis [pre-expansion of an argument only uses -tokens from that argument; it cannot take tokens from whatever follows -the macro invocation]. This still leaves the argument token `foo' -eligible for future expansion. Then, when re-scanning after argument -replacement, the token `foo' is rejected for expansion, and marked -ineligible for future expansion, since the macro is now disabled. It -is disabled because the replacement list `bar foo' of the macro is -still on the context stack. - - If instead the algorithm looked for an opening parenthesis first and -then tested whether the macro were disabled it would be subtly wrong. -In the example above, the replacement list of `foo' would be popped in -the process of finding the parenthesis, re-enabling `foo' and expanding -it a second time. - -Looking for a function-like macro's opening parenthesis -======================================================= - -Function-like macros only expand when immediately followed by a -parenthesis. To do this cpplib needs to temporarily disable macros and -read the next token. Unfortunately, because of spacing issues (*note -Token Spacing::), there can be fake padding tokens in-between, and if -the next real token is not a parenthesis cpplib needs to be able to -back up that one token as well as retain the information in any -intervening padding tokens. - - Backing up more than one token when macros are involved is not -permitted by cpplib, because in general it might involve issues like -restoring popped contexts onto the context stack, which are too hard. -Instead, searching for the parenthesis is handled by a special -function, `funlike_invocation_p', which remembers padding information -as it reads tokens. If the next real token is not an opening -parenthesis, it backs up that one token, and then pushes an extra -context just containing the padding information if necessary. - -Marking tokens ineligible for future expansion -============================================== - -As discussed above, cpplib needs a way of marking tokens as -unexpandable. Since the tokens cpplib handles are read-only once they -have been lexed, it instead makes a copy of the token and adds the flag -`NO_EXPAND' to the copy. - - For efficiency and to simplify memory management by avoiding having -to remember to free these tokens, they are allocated as temporary tokens -from the lexer's current token run (*note Lexing a line::) using the -function `_cpp_temp_token'. The tokens are then re-used once the -current line of tokens has been read in. - - This might sound unsafe. However, tokens runs are not re-used at the -end of a line if it happens to be in the middle of a macro argument -list, and cpplib only wants to back-up more than one lexer token in -situations where no macro expansion is involved, so the optimization is -safe. - - -File: cppinternals.info, Node: Token Spacing, Next: Line Numbering, Prev: Macro Expansion, Up: Top - -Token Spacing -************* - -First, consider an issue that only concerns the stand-alone -preprocessor: there needs to be a guarantee that re-reading its -preprocessed output results in an identical token stream. Without -taking special measures, this might not be the case because of macro -substitution. For example: - - #define PLUS + - #define EMPTY - #define f(x) =x= - +PLUS -EMPTY- PLUS+ f(=) - ==> + + - - + + = = = - _not_ - ==> ++ -- ++ === - - One solution would be to simply insert a space between all adjacent -tokens. However, we would like to keep space insertion to a minimum, -both for aesthetic reasons and because it causes problems for people who -still try to abuse the preprocessor for things like Fortran source and -Makefiles. - - For now, just notice that when tokens are added (or removed, as -shown by the `EMPTY' example) from the original lexed token stream, we -need to check for accidental token pasting. We call this "paste -avoidance". Token addition and removal can only occur because of macro -expansion, but accidental pasting can occur in many places: both before -and after each macro replacement, each argument replacement, and -additionally each token created by the `#' and `##' operators. - - Look at how the preprocessor gets whitespace output correct -normally. The `cpp_token' structure contains a flags byte, and one of -those flags is `PREV_WHITE'. This is flagged by the lexer, and -indicates that the token was preceded by whitespace of some form other -than a new line. The stand-alone preprocessor can use this flag to -decide whether to insert a space between tokens in the output. - - Now consider the result of the following macro expansion: - - #define add(x, y, z) x + y +z; - sum = add (1,2, 3); - ==> sum = 1 + 2 +3; - - The interesting thing here is that the tokens `1' and `2' are output -with a preceding space, and `3' is output without a preceding space, -but when lexed none of these tokens had that property. Careful -consideration reveals that `1' gets its preceding whitespace from the -space preceding `add' in the macro invocation, _not_ replacement list. -`2' gets its whitespace from the space preceding the parameter `y' in -the macro replacement list, and `3' has no preceding space because -parameter `z' has none in the replacement list. - - Once lexed, tokens are effectively fixed and cannot be altered, since -pointers to them might be held in many places, in particular by -in-progress macro expansions. So instead of modifying the two tokens -above, the preprocessor inserts a special token, which I call a -"padding token", into the token stream to indicate that spacing of the -subsequent token is special. The preprocessor inserts padding tokens -in front of every macro expansion and expanded macro argument. These -point to a "source token" from which the subsequent real token should -inherit its spacing. In the above example, the source tokens are `add' -in the macro invocation, and `y' and `z' in the macro replacement list, -respectively. - - It is quite easy to get multiple padding tokens in a row, for -example if a macro's first replacement token expands straight into -another macro. - - #define foo bar - #define bar baz - [foo] - ==> [baz] - - Here, two padding tokens are generated with sources the `foo' token -between the brackets, and the `bar' token from foo's replacement list, -respectively. Clearly the first padding token is the one to use, so -the output code should contain a rule that the first padding token in a -sequence is the one that matters. - - But what if a macro expansion is left? Adjusting the above example -slightly: - - #define foo bar - #define bar EMPTY baz - #define EMPTY - [foo] EMPTY; - ==> [ baz] ; - - As shown, now there should be a space before `baz' and the semicolon -in the output. - - The rules we decided above fail for `baz': we generate three padding -tokens, one per macro invocation, before the token `baz'. We would -then have it take its spacing from the first of these, which carries -source token `foo' with no leading space. - - It is vital that cpplib get spacing correct in these examples since -any of these macro expansions could be stringified, where spacing -matters. - - So, this demonstrates that not just entering macro and argument -expansions, but leaving them requires special handling too. I made -cpplib insert a padding token with a `NULL' source token when leaving -macro expansions, as well as after each replaced argument in a macro's -replacement list. It also inserts appropriate padding tokens on either -side of tokens created by the `#' and `##' operators. I expanded the -rule so that, if we see a padding token with a `NULL' source token, -_and_ that source token has no leading space, then we behave as if we -have seen no padding tokens at all. A quick check shows this rule will -then get the above example correct as well. - - Now a relationship with paste avoidance is apparent: we have to be -careful about paste avoidance in exactly the same locations we have -padding tokens in order to get white space correct. This makes -implementation of paste avoidance easy: wherever the stand-alone -preprocessor is fixing up spacing because of padding tokens, and it -turns out that no space is needed, it has to take the extra step to -check that a space is not needed after all to avoid an accidental paste. -The function `cpp_avoid_paste' advises whether a space is required -between two consecutive tokens. To avoid excessive spacing, it tries -hard to only require a space if one is likely to be necessary, but for -reasons of efficiency it is slightly conservative and might recommend a -space where one is not strictly needed. - - -File: cppinternals.info, Node: Line Numbering, Next: Guard Macros, Prev: Token Spacing, Up: Top - -Line numbering -************** - -Just which line number anyway? -============================== - -There are three reasonable requirements a cpplib client might have for -the line number of a token passed to it: - - * The source line it was lexed on. - - * The line it is output on. This can be different to the line it was - lexed on if, for example, there are intervening escaped newlines or - C-style comments. For example: - - foo /* A long - comment */ bar \ - baz - => - foo bar baz - - * If the token results from a macro expansion, the line of the macro - name, or possibly the line of the closing parenthesis in the case - of function-like macro expansion. - - The `cpp_token' structure contains `line' and `col' members. The -lexer fills these in with the line and column of the first character of -the token. Consequently, but maybe unexpectedly, a token from the -replacement list of a macro expansion carries the location of the token -within the `#define' directive, because cpplib expands a macro by -returning pointers to the tokens in its replacement list. The current -implementation of cpplib assigns tokens created from built-in macros -and the `#' and `##' operators the location of the most recently lexed -token. This is a because they are allocated from the lexer's token -runs, and because of the way the diagnostic routines infer the -appropriate location to report. - - The diagnostic routines in cpplib display the location of the most -recently _lexed_ token, unless they are passed a specific line and -column to report. For diagnostics regarding tokens that arise from -macro expansions, it might also be helpful for the user to see the -original location in the macro definition that the token came from. -Since that is exactly the information each token carries, such an -enhancement could be made relatively easily in future. - - The stand-alone preprocessor faces a similar problem when determining -the correct line to output the token on: the position attached to a -token is fairly useless if the token came from a macro expansion. All -tokens on a logical line should be output on its first physical line, so -the token's reported location is also wrong if it is part of a physical -line other than the first. - - To solve these issues, cpplib provides a callback that is generated -whenever it lexes a preprocessing token that starts a new logical line -other than a directive. It passes this token (which may be a `CPP_EOF' -token indicating the end of the translation unit) to the callback -routine, which can then use the line and column of this token to -produce correct output. - -Representation of line numbers -============================== - -As mentioned above, cpplib stores with each token the line number that -it was lexed on. In fact, this number is not the number of the line in -the source file, but instead bears more resemblance to the number of the -line in the translation unit. - - The preprocessor maintains a monotonic increasing line count, which -is incremented at every new line character (and also at the end of any -buffer that does not end in a new line). Since a line number of zero is -useful to indicate certain special states and conditions, this variable -starts counting from one. - - This variable therefore uniquely enumerates each line in the -translation unit. With some simple infrastructure, it is straight -forward to map from this to the original source file and line number -pair, saving space whenever line number information needs to be saved. -The code the implements this mapping lies in the files `line-map.c' and -`line-map.h'. - - Command-line macros and assertions are implemented by pushing a -buffer containing the right hand side of an equivalent `#define' or -`#assert' directive. Some built-in macros are handled similarly. -Since these are all processed before the first line of the main input -file, it will typically have an assigned line closer to twenty than to -one. - - -File: cppinternals.info, Node: Guard Macros, Next: Files, Prev: Line Numbering, Up: Top - -The Multiple-Include Optimization -********************************* - -Header files are often of the form - - #ifndef FOO - #define FOO - ... - #endif - -to prevent the compiler from processing them more than once. The -preprocessor notices such header files, so that if the header file -appears in a subsequent `#include' directive and `FOO' is defined, then -it is ignored and it doesn't preprocess or even re-open the file a -second time. This is referred to as the "multiple include -optimization". - - Under what circumstances is such an optimization valid? If the file -were included a second time, it can only be optimized away if that -inclusion would result in no tokens to return, and no relevant -directives to process. Therefore the current implementation imposes -requirements and makes some allowances as follows: - - 1. There must be no tokens outside the controlling `#if'-`#endif' - pair, but whitespace and comments are permitted. - - 2. There must be no directives outside the controlling directive - pair, but the "null directive" (a line containing nothing other - than a single `#' and possibly whitespace) is permitted. - - 3. The opening directive must be of the form - - #ifndef FOO - - or - - #if !defined FOO [equivalently, #if !defined(FOO)] - - 4. In the second form above, the tokens forming the `#if' expression - must have come directly from the source file--no macro expansion - must have been involved. This is because macro definitions can - change, and tracking whether or not a relevant change has been - made is not worth the implementation cost. - - 5. There can be no `#else' or `#elif' directives at the outer - conditional block level, because they would probably contain - something of interest to a subsequent pass. - - First, when pushing a new file on the buffer stack, -`_stack_include_file' sets the controlling macro `mi_cmacro' to `NULL', -and sets `mi_valid' to `true'. This indicates that the preprocessor -has not yet encountered anything that would invalidate the -multiple-include optimization. As described in the next few -paragraphs, these two variables having these values effectively -indicates top-of-file. - - When about to return a token that is not part of a directive, -`_cpp_lex_token' sets `mi_valid' to `false'. This enforces the -constraint that tokens outside the controlling conditional block -invalidate the optimization. - - The `do_if', when appropriate, and `do_ifndef' directive handlers -pass the controlling macro to the function `push_conditional'. cpplib -maintains a stack of nested conditional blocks, and after processing -every opening conditional this function pushes an `if_stack' structure -onto the stack. In this structure it records the controlling macro for -the block, provided there is one and we're at top-of-file (as described -above). If an `#elif' or `#else' directive is encountered, the -controlling macro for that block is cleared to `NULL'. Otherwise, it -survives until the `#endif' closing the block, upon which `do_endif' -sets `mi_valid' to true and stores the controlling macro in `mi_cmacro'. - - `_cpp_handle_directive' clears `mi_valid' when processing any -directive other than an opening conditional and the null directive. -With this, and requiring top-of-file to record a controlling macro, and -no `#else' or `#elif' for it to survive and be copied to `mi_cmacro' by -`do_endif', we have enforced the absence of directives outside the main -conditional block for the optimization to be on. - - Note that whilst we are inside the conditional block, `mi_valid' is -likely to be reset to `false', but this does not matter since the -closing `#endif' restores it to `true' if appropriate. - - Finally, since `_cpp_lex_direct' pops the file off the buffer stack -at `EOF' without returning a token, if the `#endif' directive was not -followed by any tokens, `mi_valid' is `true' and `_cpp_pop_file_buffer' -remembers the controlling macro associated with the file. Subsequent -calls to `stack_include_file' result in no buffer being pushed if the -controlling macro is defined, effecting the optimization. - - A quick word on how we handle the - - #if !defined FOO - -case. `_cpp_parse_expr' and `parse_defined' take steps to see whether -the three stages `!', `defined-expression' and `end-of-directive' occur -in order in a `#if' expression. If so, they return the guard macro to -`do_if' in the variable `mi_ind_cmacro', and otherwise set it to `NULL'. -`enter_macro_context' sets `mi_valid' to false, so if a macro was -expanded whilst parsing any part of the expression, then the -top-of-file test in `push_conditional' fails and the optimization is -turned off. - - -File: cppinternals.info, Node: Files, Next: Concept Index, Prev: Guard Macros, Up: Top - -File Handling -************* - -Fairly obviously, the file handling code of cpplib resides in the file -`files.c'. It takes care of the details of file searching, opening, -reading and caching, for both the main source file and all the headers -it recursively includes. - - The basic strategy is to minimize the number of system calls. On -many systems, the basic `open ()' and `fstat ()' system calls can be -quite expensive. For every `#include'-d file, we need to try all the -directories in the search path until we find a match. Some projects, -such as glibc, pass twenty or thirty include paths on the command line, -so this can rapidly become time consuming. - - For a header file we have not encountered before we have little -choice but to do this. However, it is often the case that the same -headers are repeatedly included, and in these cases we try to avoid -repeating the filesystem queries whilst searching for the correct file. - - For each file we try to open, we store the constructed path in a -splay tree. This path first undergoes simplification by the function -`_cpp_simplify_pathname'. For example, `/usr/include/bits/../foo.h' is -simplified to `/usr/include/foo.h' before we enter it in the splay tree -and try to `open ()' the file. CPP will then find subsequent uses of -`foo.h', even as `/usr/include/foo.h', in the splay tree and save -system calls. - - Further, it is likely the file contents have also been cached, -saving a `read ()' system call. We don't bother caching the contents of -header files that are re-inclusion protected, and whose re-inclusion -macro is defined when we leave the header file for the first time. If -the host supports it, we try to map suitably large files into memory, -rather than reading them in directly. - - The include paths are internally stored on a null-terminated -singly-linked list, starting with the `"header.h"' directory search -chain, which then links into the `' directory chain. - - Files included with the `' syntax start the lookup directly -in the second half of this chain. However, files included with the -`"foo.h"' syntax start at the beginning of the chain, but with one -extra directory prepended. This is the directory of the current file; -the one containing the `#include' directive. Prepending this directory -on a per-file basis is handled by the function `search_from'. - - Note that a header included with a directory component, such as -`#include "mydir/foo.h"' and opened as -`/usr/local/include/mydir/foo.h', will have the complete path minus the -basename `foo.h' as the current directory. - - Enough information is stored in the splay tree that CPP can -immediately tell whether it can skip the header file because of the -multiple include optimization, whether the file didn't exist or -couldn't be opened for some reason, or whether the header was flagged -not to be re-used, as it is with the obsolete `#import' directive. - - For the benefit of MS-DOS filesystems with an 8.3 filename -limitation, CPP offers the ability to treat various include file names -as aliases for the real header files with shorter names. The map from -one to the other is found in a special file called `header.gcc', stored -in the command line (or system) include directories to which the mapping -applies. This may be higher up the directory tree than the full path to -the file minus the base name. - - -File: cppinternals.info, Node: Concept Index, Prev: Files, Up: Top - -Concept Index -************* - -[index] -* Menu: - -* assertions: Hash Nodes. (line 6) -* controlling macros: Guard Macros. (line 6) -* escaped newlines: Lexer. (line 6) -* files: Files. (line 6) -* guard macros: Guard Macros. (line 6) -* hash table: Hash Nodes. (line 6) -* header files: Conventions. (line 6) -* identifiers: Hash Nodes. (line 6) -* interface: Conventions. (line 6) -* lexer: Lexer. (line 6) -* line numbers: Line Numbering. (line 6) -* macro expansion: Macro Expansion. (line 6) -* macro representation (internal): Macro Expansion. (line 19) -* macros: Hash Nodes. (line 6) -* multiple-include optimization: Guard Macros. (line 6) -* named operators: Hash Nodes. (line 6) -* newlines: Lexer. (line 6) -* paste avoidance: Token Spacing. (line 6) -* spacing: Token Spacing. (line 6) -* token run: Lexer. (line 192) -* token spacing: Token Spacing. (line 6) - - - -Tag Table: -Node: Top971 -Node: Conventions2656 -Node: Lexer3598 -Ref: Invalid identifiers11511 -Ref: Lexing a line13460 -Node: Hash Nodes18233 -Node: Macro Expansion21112 -Node: Token Spacing30059 -Node: Line Numbering35919 -Node: Guard Macros40004 -Node: Files44795 -Node: Concept Index48261 - -End Tag Table