X-Git-Url: https://oss.titaniummirror.com/gitweb?p=msp430-binutils.git;a=blobdiff_plain;f=gprof%2Fgprof.info;fp=gprof%2Fgprof.info;h=0000000000000000000000000000000000000000;hp=054191f53be4f7325739529e57871017f1400c0a;hb=2535b36b22dedcdea35e497d38a1c9c735961d28;hpb=47f73751c91775676bb03af53e83c7f49dfda44f diff --git a/gprof/gprof.info b/gprof/gprof.info deleted file mode 100644 index 054191f..0000000 --- a/gprof/gprof.info +++ /dev/null @@ -1,2340 +0,0 @@ -This is gprof.info, produced by makeinfo version 4.8 from gprof.texi. - -START-INFO-DIR-ENTRY -* gprof: (gprof). Profiling your program's execution -END-INFO-DIR-ENTRY - - This file documents the gprof profiler of the GNU system. - - Copyright (C) 1988, 92, 97, 98, 99, 2000, 2001, 2003, 2007 Free -Software Foundation, Inc. - - Permission is granted to copy, distribute and/or modify this document -under the terms of the GNU Free Documentation License, Version 1.1 or -any later version published by the Free Software Foundation; with no -Invariant Sections, with no Front-Cover Texts, and with no Back-Cover -Texts. A copy of the license is included in the section entitled "GNU -Free Documentation License". - - -File: gprof.info, Node: Top, Next: Introduction, Up: (dir) - -Profiling a Program: Where Does It Spend Its Time? -************************************************** - -This manual describes the GNU profiler, `gprof', and how you can use it -to determine which parts of a program are taking most of the execution -time. We assume that you know how to write, compile, and execute -programs. GNU `gprof' was written by Jay Fenlason. - - This manual is for `gprof' (GNU Binutils) version 2.17.90. - - This document is distributed under the terms of the GNU Free -Documentation License. A copy of the license is included in the -section entitled "GNU Free Documentation License". - -* Menu: - -* Introduction:: What profiling means, and why it is useful. - -* Compiling:: How to compile your program for profiling. -* Executing:: Executing your program to generate profile data -* Invoking:: How to run `gprof', and its options - -* Output:: Interpreting `gprof''s output - -* Inaccuracy:: Potential problems you should be aware of -* How do I?:: Answers to common questions -* Incompatibilities:: (between GNU `gprof' and Unix `gprof'.) -* Details:: Details of how profiling is done -* GNU Free Documentation License:: GNU Free Documentation License - - -File: gprof.info, Node: Introduction, Next: Compiling, Prev: Top, Up: Top - -1 Introduction to Profiling -*************************** - -Profiling allows you to learn where your program spent its time and -which functions called which other functions while it was executing. -This information can show you which pieces of your program are slower -than you expected, and might be candidates for rewriting to make your -program execute faster. It can also tell you which functions are being -called more or less often than you expected. This may help you spot -bugs that had otherwise been unnoticed. - - Since the profiler uses information collected during the actual -execution of your program, it can be used on programs that are too -large or too complex to analyze by reading the source. However, how -your program is run will affect the information that shows up in the -profile data. If you don't use some feature of your program while it -is being profiled, no profile information will be generated for that -feature. - - Profiling has several steps: - - * You must compile and link your program with profiling enabled. - *Note Compiling a Program for Profiling: Compiling. - - * You must execute your program to generate a profile data file. - *Note Executing the Program: Executing. - - * You must run `gprof' to analyze the profile data. *Note `gprof' - Command Summary: Invoking. - - The next three chapters explain these steps in greater detail. - - Several forms of output are available from the analysis. - - The "flat profile" shows how much time your program spent in each -function, and how many times that function was called. If you simply -want to know which functions burn most of the cycles, it is stated -concisely here. *Note The Flat Profile: Flat Profile. - - The "call graph" shows, for each function, which functions called -it, which other functions it called, and how many times. There is also -an estimate of how much time was spent in the subroutines of each -function. This can suggest places where you might try to eliminate -function calls that use a lot of time. *Note The Call Graph: Call -Graph. - - The "annotated source" listing is a copy of the program's source -code, labeled with the number of times each line of the program was -executed. *Note The Annotated Source Listing: Annotated Source. - - To better understand how profiling works, you may wish to read a -description of its implementation. *Note Implementation of Profiling: -Implementation. - - -File: gprof.info, Node: Compiling, Next: Executing, Prev: Introduction, Up: Top - -2 Compiling a Program for Profiling -*********************************** - -The first step in generating profile information for your program is to -compile and link it with profiling enabled. - - To compile a source file for profiling, specify the `-pg' option when -you run the compiler. (This is in addition to the options you normally -use.) - - To link the program for profiling, if you use a compiler such as `cc' -to do the linking, simply specify `-pg' in addition to your usual -options. The same option, `-pg', alters either compilation or linking -to do what is necessary for profiling. Here are examples: - - cc -g -c myprog.c utils.c -pg - cc -o myprog myprog.o utils.o -pg - - The `-pg' option also works with a command that both compiles and -links: - - cc -o myprog myprog.c utils.c -g -pg - - Note: The `-pg' option must be part of your compilation options as -well as your link options. If it is not then no call-graph data will -be gathered and when you run `gprof' you will get an error message like -this: - - gprof: gmon.out file is missing call-graph data - - If you add the `-Q' switch to suppress the printing of the call -graph data you will still be able to see the time samples: - - Flat profile: - - Each sample counts as 0.01 seconds. - % cumulative self self total - time seconds seconds calls Ts/call Ts/call name - 44.12 0.07 0.07 zazLoop - 35.29 0.14 0.06 main - 20.59 0.17 0.04 bazMillion - - If you run the linker `ld' directly instead of through a compiler -such as `cc', you may have to specify a profiling startup file -`gcrt0.o' as the first input file instead of the usual startup file -`crt0.o'. In addition, you would probably want to specify the -profiling C library, `libc_p.a', by writing `-lc_p' instead of the -usual `-lc'. This is not absolutely necessary, but doing this gives -you number-of-calls information for standard library functions such as -`read' and `open'. For example: - - ld -o myprog /lib/gcrt0.o myprog.o utils.o -lc_p - - If you compile only some of the modules of the program with `-pg', -you can still profile the program, but you won't get complete -information about the modules that were compiled without `-pg'. The -only information you get for the functions in those modules is the -total time spent in them; there is no record of how many times they -were called, or from where. This will not affect the flat profile -(except that the `calls' field for the functions will be blank), but -will greatly reduce the usefulness of the call graph. - - If you wish to perform line-by-line profiling you should use the -`gcov' tool instead of `gprof'. See that tool's manual or info pages -for more details of how to do this. - - Note, older versions of `gcc' produce line-by-line profiling -information that works with `gprof' rather than `gcov' so there is -still support for displaying this kind of information in `gprof'. *Note -Line-by-line Profiling: Line-by-line. - - It also worth noting that `gcc' implements a -`-finstrument-functions' command line option which will insert calls to -special user supplied instrumentation routines at the entry and exit of -every function in their program. This can be used to implement an -alternative profiling scheme. - - -File: gprof.info, Node: Executing, Next: Invoking, Prev: Compiling, Up: Top - -3 Executing the Program -*********************** - -Once the program is compiled for profiling, you must run it in order to -generate the information that `gprof' needs. Simply run the program as -usual, using the normal arguments, file names, etc. The program should -run normally, producing the same output as usual. It will, however, run -somewhat slower than normal because of the time spent collecting and -writing the profile data. - - The way you run the program--the arguments and input that you give -it--may have a dramatic effect on what the profile information shows. -The profile data will describe the parts of the program that were -activated for the particular input you use. For example, if the first -command you give to your program is to quit, the profile data will show -the time used in initialization and in cleanup, but not much else. - - Your program will write the profile data into a file called -`gmon.out' just before exiting. If there is already a file called -`gmon.out', its contents are overwritten. There is currently no way to -tell the program to write the profile data under a different name, but -you can rename the file afterwards if you are concerned that it may be -overwritten. - - In order to write the `gmon.out' file properly, your program must -exit normally: by returning from `main' or by calling `exit'. Calling -the low-level function `_exit' does not write the profile data, and -neither does abnormal termination due to an unhandled signal. - - The `gmon.out' file is written in the program's _current working -directory_ at the time it exits. This means that if your program calls -`chdir', the `gmon.out' file will be left in the last directory your -program `chdir''d to. If you don't have permission to write in this -directory, the file is not written, and you will get an error message. - - Older versions of the GNU profiling library may also write a file -called `bb.out'. This file, if present, contains an human-readable -listing of the basic-block execution counts. Unfortunately, the -appearance of a human-readable `bb.out' means the basic-block counts -didn't get written into `gmon.out'. The Perl script `bbconv.pl', -included with the `gprof' source distribution, will convert a `bb.out' -file into a format readable by `gprof'. Invoke it like this: - - bbconv.pl < bb.out > BH-DATA - - This translates the information in `bb.out' into a form that `gprof' -can understand. But you still need to tell `gprof' about the existence -of this translated information. To do that, include BB-DATA on the -`gprof' command line, _along with `gmon.out'_, like this: - - gprof OPTIONS EXECUTABLE-FILE gmon.out BB-DATA [YET-MORE-PROFILE-DATA-FILES...] [> OUTFILE] - - -File: gprof.info, Node: Invoking, Next: Output, Prev: Executing, Up: Top - -4 `gprof' Command Summary -************************* - -After you have a profile data file `gmon.out', you can run `gprof' to -interpret the information in it. The `gprof' program prints a flat -profile and a call graph on standard output. Typically you would -redirect the output of `gprof' into a file with `>'. - - You run `gprof' like this: - - gprof OPTIONS [EXECUTABLE-FILE [PROFILE-DATA-FILES...]] [> OUTFILE] - -Here square-brackets indicate optional arguments. - - If you omit the executable file name, the file `a.out' is used. If -you give no profile data file name, the file `gmon.out' is used. If -any file is not in the proper format, or if the profile data file does -not appear to belong to the executable file, an error message is -printed. - - You can give more than one profile data file by entering all their -names after the executable file name; then the statistics in all the -data files are summed together. - - The order of these options does not matter. - -* Menu: - -* Output Options:: Controlling `gprof''s output style -* Analysis Options:: Controlling how `gprof' analyzes its data -* Miscellaneous Options:: -* Deprecated Options:: Options you no longer need to use, but which - have been retained for compatibility -* Symspecs:: Specifying functions to include or exclude - - -File: gprof.info, Node: Output Options, Next: Analysis Options, Up: Invoking - -4.1 Output Options -================== - -These options specify which of several output formats `gprof' should -produce. - - Many of these options take an optional "symspec" to specify -functions to be included or excluded. These options can be specified -multiple times, with different symspecs, to include or exclude sets of -symbols. *Note Symspecs: Symspecs. - - Specifying any of these options overrides the default (`-p -q'), -which prints a flat profile and call graph analysis for all functions. - -`-A[SYMSPEC]' -`--annotated-source[=SYMSPEC]' - The `-A' option causes `gprof' to print annotated source code. If - SYMSPEC is specified, print output only for matching symbols. - *Note The Annotated Source Listing: Annotated Source. - -`-b' -`--brief' - If the `-b' option is given, `gprof' doesn't print the verbose - blurbs that try to explain the meaning of all of the fields in the - tables. This is useful if you intend to print out the output, or - are tired of seeing the blurbs. - -`-C[SYMSPEC]' -`--exec-counts[=SYMSPEC]' - The `-C' option causes `gprof' to print a tally of functions and - the number of times each was called. If SYMSPEC is specified, - print tally only for matching symbols. - - If the profile data file contains basic-block count records, - specifying the `-l' option, along with `-C', will cause basic-block - execution counts to be tallied and displayed. - -`-i' -`--file-info' - The `-i' option causes `gprof' to display summary information - about the profile data file(s) and then exit. The number of - histogram, call graph, and basic-block count records is displayed. - -`-I DIRS' -`--directory-path=DIRS' - The `-I' option specifies a list of search directories in which to - find source files. Environment variable GPROF_PATH can also be - used to convey this information. Used mostly for annotated source - output. - -`-J[SYMSPEC]' -`--no-annotated-source[=SYMSPEC]' - The `-J' option causes `gprof' not to print annotated source code. - If SYMSPEC is specified, `gprof' prints annotated source, but - excludes matching symbols. - -`-L' -`--print-path' - Normally, source filenames are printed with the path component - suppressed. The `-L' option causes `gprof' to print the full - pathname of source filenames, which is determined from symbolic - debugging information in the image file and is relative to the - directory in which the compiler was invoked. - -`-p[SYMSPEC]' -`--flat-profile[=SYMSPEC]' - The `-p' option causes `gprof' to print a flat profile. If - SYMSPEC is specified, print flat profile only for matching symbols. - *Note The Flat Profile: Flat Profile. - -`-P[SYMSPEC]' -`--no-flat-profile[=SYMSPEC]' - The `-P' option causes `gprof' to suppress printing a flat profile. - If SYMSPEC is specified, `gprof' prints a flat profile, but - excludes matching symbols. - -`-q[SYMSPEC]' -`--graph[=SYMSPEC]' - The `-q' option causes `gprof' to print the call graph analysis. - If SYMSPEC is specified, print call graph only for matching symbols - and their children. *Note The Call Graph: Call Graph. - -`-Q[SYMSPEC]' -`--no-graph[=SYMSPEC]' - The `-Q' option causes `gprof' to suppress printing the call graph. - If SYMSPEC is specified, `gprof' prints a call graph, but excludes - matching symbols. - -`-t' -`--table-length=NUM' - The `-t' option causes the NUM most active source lines in each - source file to be listed when source annotation is enabled. The - default is 10. - -`-y' -`--separate-files' - This option affects annotated source output only. Normally, - `gprof' prints annotated source files to standard-output. If this - option is specified, annotated source for a file named - `path/FILENAME' is generated in the file `FILENAME-ann'. If the - underlying file system would truncate `FILENAME-ann' so that it - overwrites the original `FILENAME', `gprof' generates annotated - source in the file `FILENAME.ann' instead (if the original file - name has an extension, that extension is _replaced_ with `.ann'). - -`-Z[SYMSPEC]' -`--no-exec-counts[=SYMSPEC]' - The `-Z' option causes `gprof' not to print a tally of functions - and the number of times each was called. If SYMSPEC is specified, - print tally, but exclude matching symbols. - -`-r' -`--function-ordering' - The `--function-ordering' option causes `gprof' to print a - suggested function ordering for the program based on profiling - data. This option suggests an ordering which may improve paging, - tlb and cache behavior for the program on systems which support - arbitrary ordering of functions in an executable. - - The exact details of how to force the linker to place functions in - a particular order is system dependent and out of the scope of this - manual. - -`-R MAP_FILE' -`--file-ordering MAP_FILE' - The `--file-ordering' option causes `gprof' to print a suggested - .o link line ordering for the program based on profiling data. - This option suggests an ordering which may improve paging, tlb and - cache behavior for the program on systems which do not support - arbitrary ordering of functions in an executable. - - Use of the `-a' argument is highly recommended with this option. - - The MAP_FILE argument is a pathname to a file which provides - function name to object file mappings. The format of the file is - similar to the output of the program `nm'. - - c-parse.o:00000000 T yyparse - c-parse.o:00000004 C yyerrflag - c-lang.o:00000000 T maybe_objc_method_name - c-lang.o:00000000 T print_lang_statistics - c-lang.o:00000000 T recognize_objc_keyword - c-decl.o:00000000 T print_lang_identifier - c-decl.o:00000000 T print_lang_type - ... - - To create a MAP_FILE with GNU `nm', type a command like `nm - --extern-only --defined-only -v --print-file-name program-name'. - -`-T' -`--traditional' - The `-T' option causes `gprof' to print its output in - "traditional" BSD style. - -`-w WIDTH' -`--width=WIDTH' - Sets width of output lines to WIDTH. Currently only used when - printing the function index at the bottom of the call graph. - -`-x' -`--all-lines' - This option affects annotated source output only. By default, - only the lines at the beginning of a basic-block are annotated. - If this option is specified, every line in a basic-block is - annotated by repeating the annotation for the first line. This - behavior is similar to `tcov''s `-a'. - -`--demangle[=STYLE]' -`--no-demangle' - These options control whether C++ symbol names should be demangled - when printing output. The default is to demangle symbols. The - `--no-demangle' option may be used to turn off demangling. - Different compilers have different mangling styles. The optional - demangling style argument can be used to choose an appropriate - demangling style for your compiler. - - -File: gprof.info, Node: Analysis Options, Next: Miscellaneous Options, Prev: Output Options, Up: Invoking - -4.2 Analysis Options -==================== - -`-a' -`--no-static' - The `-a' option causes `gprof' to suppress the printing of - statically declared (private) functions. (These are functions - whose names are not listed as global, and which are not visible - outside the file/function/block where they were defined.) Time - spent in these functions, calls to/from them, etc., will all be - attributed to the function that was loaded directly before it in - the executable file. This option affects both the flat profile - and the call graph. - -`-c' -`--static-call-graph' - The `-c' option causes the call graph of the program to be - augmented by a heuristic which examines the text space of the - object file and identifies function calls in the binary machine - code. Since normal call graph records are only generated when - functions are entered, this option identifies children that could - have been called, but never were. Calls to functions that were - not compiled with profiling enabled are also identified, but only - if symbol table entries are present for them. Calls to dynamic - library routines are typically _not_ found by this option. - Parents or children identified via this heuristic are indicated in - the call graph with call counts of `0'. - -`-D' -`--ignore-non-functions' - The `-D' option causes `gprof' to ignore symbols which are not - known to be functions. This option will give more accurate - profile data on systems where it is supported (Solaris and HPUX for - example). - -`-k FROM/TO' - The `-k' option allows you to delete from the call graph any arcs - from symbols matching symspec FROM to those matching symspec TO. - -`-l' -`--line' - The `-l' option enables line-by-line profiling, which causes - histogram hits to be charged to individual source code lines, - instead of functions. This feature only works with programs - compiled by older versions of the `gcc' compiler. Newer versions - of `gcc' are designed to work with the `gcov' tool instead. - - If the program was compiled with basic-block counting enabled, - this option will also identify how many times each line of code - was executed. While line-by-line profiling can help isolate where - in a large function a program is spending its time, it also - significantly increases the running time of `gprof', and magnifies - statistical inaccuracies. *Note Statistical Sampling Error: - Sampling Error. - -`-m NUM' -`--min-count=NUM' - This option affects execution count output only. Symbols that are - executed less than NUM times are suppressed. - -`-nSYMSPEC' -`--time=SYMSPEC' - The `-n' option causes `gprof', in its call graph analysis, to - only propagate times for symbols matching SYMSPEC. - -`-NSYMSPEC' -`--no-time=SYMSPEC' - The `-n' option causes `gprof', in its call graph analysis, not to - propagate times for symbols matching SYMSPEC. - -`-z' -`--display-unused-functions' - If you give the `-z' option, `gprof' will mention all functions in - the flat profile, even those that were never called, and that had - no time spent in them. This is useful in conjunction with the - `-c' option for discovering which routines were never called. - - - -File: gprof.info, Node: Miscellaneous Options, Next: Deprecated Options, Prev: Analysis Options, Up: Invoking - -4.3 Miscellaneous Options -========================= - -`-d[NUM]' -`--debug[=NUM]' - The `-d NUM' option specifies debugging options. If NUM is not - specified, enable all debugging. *Note Debugging `gprof': - Debugging. - -`-h' -`--help' - The `-h' option prints command line usage. - -`-ONAME' -`--file-format=NAME' - Selects the format of the profile data files. Recognized formats - are `auto' (the default), `bsd', `4.4bsd', `magic', and `prof' - (not yet supported). - -`-s' -`--sum' - The `-s' option causes `gprof' to summarize the information in the - profile data files it read in, and write out a profile data file - called `gmon.sum', which contains all the information from the - profile data files that `gprof' read in. The file `gmon.sum' may - be one of the specified input files; the effect of this is to - merge the data in the other input files into `gmon.sum'. - - Eventually you can run `gprof' again without `-s' to analyze the - cumulative data in the file `gmon.sum'. - -`-v' -`--version' - The `-v' flag causes `gprof' to print the current version number, - and then exit. - - - -File: gprof.info, Node: Deprecated Options, Next: Symspecs, Prev: Miscellaneous Options, Up: Invoking - -4.4 Deprecated Options -====================== - - These options have been replaced with newer versions that use - symspecs. - -`-e FUNCTION_NAME' - The `-e FUNCTION' option tells `gprof' to not print information - about the function FUNCTION_NAME (and its children...) in the call - graph. The function will still be listed as a child of any - functions that call it, but its index number will be shown as - `[not printed]'. More than one `-e' option may be given; only one - FUNCTION_NAME may be indicated with each `-e' option. - -`-E FUNCTION_NAME' - The `-E FUNCTION' option works like the `-e' option, but time - spent in the function (and children who were not called from - anywhere else), will not be used to compute the - percentages-of-time for the call graph. More than one `-E' option - may be given; only one FUNCTION_NAME may be indicated with each - `-E' option. - -`-f FUNCTION_NAME' - The `-f FUNCTION' option causes `gprof' to limit the call graph to - the function FUNCTION_NAME and its children (and their - children...). More than one `-f' option may be given; only one - FUNCTION_NAME may be indicated with each `-f' option. - -`-F FUNCTION_NAME' - The `-F FUNCTION' option works like the `-f' option, but only time - spent in the function and its children (and their children...) - will be used to determine total-time and percentages-of-time for - the call graph. More than one `-F' option may be given; only one - FUNCTION_NAME may be indicated with each `-F' option. The `-F' - option overrides the `-E' option. - - - Note that only one function can be specified with each `-e', `-E', -`-f' or `-F' option. To specify more than one function, use multiple -options. For example, this command: - - gprof -e boring -f foo -f bar myprogram > gprof.output - -lists in the call graph all functions that were reached from either -`foo' or `bar' and were not reachable from `boring'. - - -File: gprof.info, Node: Symspecs, Prev: Deprecated Options, Up: Invoking - -4.5 Symspecs -============ - -Many of the output options allow functions to be included or excluded -using "symspecs" (symbol specifications), which observe the following -syntax: - - filename_containing_a_dot - | funcname_not_containing_a_dot - | linenumber - | ( [ any_filename ] `:' ( any_funcname | linenumber ) ) - - Here are some sample symspecs: - -`main.c' - Selects everything in file `main.c'--the dot in the string tells - `gprof' to interpret the string as a filename, rather than as a - function name. To select a file whose name does not contain a - dot, a trailing colon should be specified. For example, `odd:' is - interpreted as the file named `odd'. - -`main' - Selects all functions named `main'. - - Note that there may be multiple instances of the same function name - because some of the definitions may be local (i.e., static). - Unless a function name is unique in a program, you must use the - colon notation explained below to specify a function from a - specific source file. - - Sometimes, function names contain dots. In such cases, it is - necessary to add a leading colon to the name. For example, - `:.mul' selects function `.mul'. - - In some object file formats, symbols have a leading underscore. - `gprof' will normally not print these underscores. When you name a - symbol in a symspec, you should type it exactly as `gprof' prints - it in its output. For example, if the compiler produces a symbol - `_main' from your `main' function, `gprof' still prints it as - `main' in its output, so you should use `main' in symspecs. - -`main.c:main' - Selects function `main' in file `main.c'. - -`main.c:134' - Selects line 134 in file `main.c'. - - -File: gprof.info, Node: Output, Next: Inaccuracy, Prev: Invoking, Up: Top - -5 Interpreting `gprof''s Output -******************************* - -`gprof' can produce several different output styles, the most important -of which are described below. The simplest output styles (file -information, execution count, and function and file ordering) are not -described here, but are documented with the respective options that -trigger them. *Note Output Options: Output Options. - -* Menu: - -* Flat Profile:: The flat profile shows how much time was spent - executing directly in each function. -* Call Graph:: The call graph shows which functions called which - others, and how much time each function used - when its subroutine calls are included. -* Line-by-line:: `gprof' can analyze individual source code lines -* Annotated Source:: The annotated source listing displays source code - labeled with execution counts - - -File: gprof.info, Node: Flat Profile, Next: Call Graph, Up: Output - -5.1 The Flat Profile -==================== - -The "flat profile" shows the total amount of time your program spent -executing each function. Unless the `-z' option is given, functions -with no apparent time spent in them, and no apparent calls to them, are -not mentioned. Note that if a function was not compiled for profiling, -and didn't run long enough to show up on the program counter histogram, -it will be indistinguishable from a function that was never called. - - This is part of a flat profile for a small program: - - Flat profile: - - Each sample counts as 0.01 seconds. - % cumulative self self total - time seconds seconds calls ms/call ms/call name - 33.34 0.02 0.02 7208 0.00 0.00 open - 16.67 0.03 0.01 244 0.04 0.12 offtime - 16.67 0.04 0.01 8 1.25 1.25 memccpy - 16.67 0.05 0.01 7 1.43 1.43 write - 16.67 0.06 0.01 mcount - 0.00 0.06 0.00 236 0.00 0.00 tzset - 0.00 0.06 0.00 192 0.00 0.00 tolower - 0.00 0.06 0.00 47 0.00 0.00 strlen - 0.00 0.06 0.00 45 0.00 0.00 strchr - 0.00 0.06 0.00 1 0.00 50.00 main - 0.00 0.06 0.00 1 0.00 0.00 memcpy - 0.00 0.06 0.00 1 0.00 10.11 print - 0.00 0.06 0.00 1 0.00 0.00 profil - 0.00 0.06 0.00 1 0.00 50.00 report - ... - -The functions are sorted first by decreasing run-time spent in them, -then by decreasing number of calls, then alphabetically by name. The -functions `mcount' and `profil' are part of the profiling apparatus and -appear in every flat profile; their time gives a measure of the amount -of overhead due to profiling. - - Just before the column headers, a statement appears indicating how -much time each sample counted as. This "sampling period" estimates the -margin of error in each of the time figures. A time figure that is not -much larger than this is not reliable. In this example, each sample -counted as 0.01 seconds, suggesting a 100 Hz sampling rate. The -program's total execution time was 0.06 seconds, as indicated by the -`cumulative seconds' field. Since each sample counted for 0.01 -seconds, this means only six samples were taken during the run. Two of -the samples occurred while the program was in the `open' function, as -indicated by the `self seconds' field. Each of the other four samples -occurred one each in `offtime', `memccpy', `write', and `mcount'. -Since only six samples were taken, none of these values can be regarded -as particularly reliable. In another run, the `self seconds' field for -`mcount' might well be `0.00' or `0.02'. *Note Statistical Sampling -Error: Sampling Error, for a complete discussion. - - The remaining functions in the listing (those whose `self seconds' -field is `0.00') didn't appear in the histogram samples at all. -However, the call graph indicated that they were called, so therefore -they are listed, sorted in decreasing order by the `calls' field. -Clearly some time was spent executing these functions, but the paucity -of histogram samples prevents any determination of how much time each -took. - - Here is what the fields in each line mean: - -`% time' - This is the percentage of the total execution time your program - spent in this function. These should all add up to 100%. - -`cumulative seconds' - This is the cumulative total number of seconds the computer spent - executing this functions, plus the time spent in all the functions - above this one in this table. - -`self seconds' - This is the number of seconds accounted for by this function alone. - The flat profile listing is sorted first by this number. - -`calls' - This is the total number of times the function was called. If the - function was never called, or the number of times it was called - cannot be determined (probably because the function was not - compiled with profiling enabled), the "calls" field is blank. - -`self ms/call' - This represents the average number of milliseconds spent in this - function per call, if this function is profiled. Otherwise, this - field is blank for this function. - -`total ms/call' - This represents the average number of milliseconds spent in this - function and its descendants per call, if this function is - profiled. Otherwise, this field is blank for this function. This - is the only field in the flat profile that uses call graph - analysis. - -`name' - This is the name of the function. The flat profile is sorted by - this field alphabetically after the "self seconds" and "calls" - fields are sorted. - - -File: gprof.info, Node: Call Graph, Next: Line-by-line, Prev: Flat Profile, Up: Output - -5.2 The Call Graph -================== - -The "call graph" shows how much time was spent in each function and its -children. From this information, you can find functions that, while -they themselves may not have used much time, called other functions -that did use unusual amounts of time. - - Here is a sample call from a small program. This call came from the -same `gprof' run as the flat profile example in the previous section. - - granularity: each sample hit covers 2 byte(s) for 20.00% of 0.05 seconds - - index % time self children called name - - [1] 100.0 0.00 0.05 start [1] - 0.00 0.05 1/1 main [2] - 0.00 0.00 1/2 on_exit [28] - 0.00 0.00 1/1 exit [59] - ----------------------------------------------- - 0.00 0.05 1/1 start [1] - [2] 100.0 0.00 0.05 1 main [2] - 0.00 0.05 1/1 report [3] - ----------------------------------------------- - 0.00 0.05 1/1 main [2] - [3] 100.0 0.00 0.05 1 report [3] - 0.00 0.03 8/8 timelocal [6] - 0.00 0.01 1/1 print [9] - 0.00 0.01 9/9 fgets [12] - 0.00 0.00 12/34 strncmp [40] - 0.00 0.00 8/8 lookup [20] - 0.00 0.00 1/1 fopen [21] - 0.00 0.00 8/8 chewtime [24] - 0.00 0.00 8/16 skipspace [44] - ----------------------------------------------- - [4] 59.8 0.01 0.02 8+472 [4] - 0.01 0.02 244+260 offtime [7] - 0.00 0.00 236+1 tzset [26] - ----------------------------------------------- - - The lines full of dashes divide this table into "entries", one for -each function. Each entry has one or more lines. - - In each entry, the primary line is the one that starts with an index -number in square brackets. The end of this line says which function -the entry is for. The preceding lines in the entry describe the -callers of this function and the following lines describe its -subroutines (also called "children" when we speak of the call graph). - - The entries are sorted by time spent in the function and its -subroutines. - - The internal profiling function `mcount' (*note The Flat Profile: -Flat Profile.) is never mentioned in the call graph. - -* Menu: - -* Primary:: Details of the primary line's contents. -* Callers:: Details of caller-lines' contents. -* Subroutines:: Details of subroutine-lines' contents. -* Cycles:: When there are cycles of recursion, - such as `a' calls `b' calls `a'... - - -File: gprof.info, Node: Primary, Next: Callers, Up: Call Graph - -5.2.1 The Primary Line ----------------------- - -The "primary line" in a call graph entry is the line that describes the -function which the entry is about and gives the overall statistics for -this function. - - For reference, we repeat the primary line from the entry for function -`report' in our main example, together with the heading line that shows -the names of the fields: - - index % time self children called name - ... - [3] 100.0 0.00 0.05 1 report [3] - - Here is what the fields in the primary line mean: - -`index' - Entries are numbered with consecutive integers. Each function - therefore has an index number, which appears at the beginning of - its primary line. - - Each cross-reference to a function, as a caller or subroutine of - another, gives its index number as well as its name. The index - number guides you if you wish to look for the entry for that - function. - -`% time' - This is the percentage of the total time that was spent in this - function, including time spent in subroutines called from this - function. - - The time spent in this function is counted again for the callers of - this function. Therefore, adding up these percentages is - meaningless. - -`self' - This is the total amount of time spent in this function. This - should be identical to the number printed in the `seconds' field - for this function in the flat profile. - -`children' - This is the total amount of time spent in the subroutine calls - made by this function. This should be equal to the sum of all the - `self' and `children' entries of the children listed directly - below this function. - -`called' - This is the number of times the function was called. - - If the function called itself recursively, there are two numbers, - separated by a `+'. The first number counts non-recursive calls, - and the second counts recursive calls. - - In the example above, the function `report' was called once from - `main'. - -`name' - This is the name of the current function. The index number is - repeated after it. - - If the function is part of a cycle of recursion, the cycle number - is printed between the function's name and the index number (*note - How Mutually Recursive Functions Are Described: Cycles.). For - example, if function `gnurr' is part of cycle number one, and has - index number twelve, its primary line would be end like this: - - gnurr [12] - - -File: gprof.info, Node: Callers, Next: Subroutines, Prev: Primary, Up: Call Graph - -5.2.2 Lines for a Function's Callers ------------------------------------- - -A function's entry has a line for each function it was called by. -These lines' fields correspond to the fields of the primary line, but -their meanings are different because of the difference in context. - - For reference, we repeat two lines from the entry for the function -`report', the primary line and one caller-line preceding it, together -with the heading line that shows the names of the fields: - - index % time self children called name - ... - 0.00 0.05 1/1 main [2] - [3] 100.0 0.00 0.05 1 report [3] - - Here are the meanings of the fields in the caller-line for `report' -called from `main': - -`self' - An estimate of the amount of time spent in `report' itself when it - was called from `main'. - -`children' - An estimate of the amount of time spent in subroutines of `report' - when `report' was called from `main'. - - The sum of the `self' and `children' fields is an estimate of the - amount of time spent within calls to `report' from `main'. - -`called' - Two numbers: the number of times `report' was called from `main', - followed by the total number of non-recursive calls to `report' - from all its callers. - -`name and index number' - The name of the caller of `report' to which this line applies, - followed by the caller's index number. - - Not all functions have entries in the call graph; some options to - `gprof' request the omission of certain functions. When a caller - has no entry of its own, it still has caller-lines in the entries - of the functions it calls. - - If the caller is part of a recursion cycle, the cycle number is - printed between the name and the index number. - - If the identity of the callers of a function cannot be determined, a -dummy caller-line is printed which has `' as the "caller's -name" and all other fields blank. This can happen for signal handlers. - - -File: gprof.info, Node: Subroutines, Next: Cycles, Prev: Callers, Up: Call Graph - -5.2.3 Lines for a Function's Subroutines ----------------------------------------- - -A function's entry has a line for each of its subroutines--in other -words, a line for each other function that it called. These lines' -fields correspond to the fields of the primary line, but their meanings -are different because of the difference in context. - - For reference, we repeat two lines from the entry for the function -`main', the primary line and a line for a subroutine, together with the -heading line that shows the names of the fields: - - index % time self children called name - ... - [2] 100.0 0.00 0.05 1 main [2] - 0.00 0.05 1/1 report [3] - - Here are the meanings of the fields in the subroutine-line for `main' -calling `report': - -`self' - An estimate of the amount of time spent directly within `report' - when `report' was called from `main'. - -`children' - An estimate of the amount of time spent in subroutines of `report' - when `report' was called from `main'. - - The sum of the `self' and `children' fields is an estimate of the - total time spent in calls to `report' from `main'. - -`called' - Two numbers, the number of calls to `report' from `main' followed - by the total number of non-recursive calls to `report'. This - ratio is used to determine how much of `report''s `self' and - `children' time gets credited to `main'. *Note Estimating - `children' Times: Assumptions. - -`name' - The name of the subroutine of `main' to which this line applies, - followed by the subroutine's index number. - - If the caller is part of a recursion cycle, the cycle number is - printed between the name and the index number. - - -File: gprof.info, Node: Cycles, Prev: Subroutines, Up: Call Graph - -5.2.4 How Mutually Recursive Functions Are Described ----------------------------------------------------- - -The graph may be complicated by the presence of "cycles of recursion" -in the call graph. A cycle exists if a function calls another function -that (directly or indirectly) calls (or appears to call) the original -function. For example: if `a' calls `b', and `b' calls `a', then `a' -and `b' form a cycle. - - Whenever there are call paths both ways between a pair of functions, -they belong to the same cycle. If `a' and `b' call each other and `b' -and `c' call each other, all three make one cycle. Note that even if -`b' only calls `a' if it was not called from `a', `gprof' cannot -determine this, so `a' and `b' are still considered a cycle. - - The cycles are numbered with consecutive integers. When a function -belongs to a cycle, each time the function name appears in the call -graph it is followed by `'. - - The reason cycles matter is that they make the time values in the -call graph paradoxical. The "time spent in children" of `a' should -include the time spent in its subroutine `b' and in `b''s -subroutines--but one of `b''s subroutines is `a'! How much of `a''s -time should be included in the children of `a', when `a' is indirectly -recursive? - - The way `gprof' resolves this paradox is by creating a single entry -for the cycle as a whole. The primary line of this entry describes the -total time spent directly in the functions of the cycle. The -"subroutines" of the cycle are the individual functions of the cycle, -and all other functions that were called directly by them. The -"callers" of the cycle are the functions, outside the cycle, that -called functions in the cycle. - - Here is an example portion of a call graph which shows a cycle -containing functions `a' and `b'. The cycle was entered by a call to -`a' from `main'; both `a' and `b' called `c'. - - index % time self children called name - ---------------------------------------- - 1.77 0 1/1 main [2] - [3] 91.71 1.77 0 1+5 [3] - 1.02 0 3 b [4] - 0.75 0 2 a [5] - ---------------------------------------- - 3 a [5] - [4] 52.85 1.02 0 0 b [4] - 2 a [5] - 0 0 3/6 c [6] - ---------------------------------------- - 1.77 0 1/1 main [2] - 2 b [4] - [5] 38.86 0.75 0 1 a [5] - 3 b [4] - 0 0 3/6 c [6] - ---------------------------------------- - -(The entire call graph for this program contains in addition an entry -for `main', which calls `a', and an entry for `c', with callers `a' and -`b'.) - - index % time self children called name - - [1] 100.00 0 1.93 0 start [1] - 0.16 1.77 1/1 main [2] - ---------------------------------------- - 0.16 1.77 1/1 start [1] - [2] 100.00 0.16 1.77 1 main [2] - 1.77 0 1/1 a [5] - ---------------------------------------- - 1.77 0 1/1 main [2] - [3] 91.71 1.77 0 1+5 [3] - 1.02 0 3 b [4] - 0.75 0 2 a [5] - 0 0 6/6 c [6] - ---------------------------------------- - 3 a [5] - [4] 52.85 1.02 0 0 b [4] - 2 a [5] - 0 0 3/6 c [6] - ---------------------------------------- - 1.77 0 1/1 main [2] - 2 b [4] - [5] 38.86 0.75 0 1 a [5] - 3 b [4] - 0 0 3/6 c [6] - ---------------------------------------- - 0 0 3/6 b [4] - 0 0 3/6 a [5] - [6] 0.00 0 0 6 c [6] - ---------------------------------------- - - The `self' field of the cycle's primary line is the total time spent -in all the functions of the cycle. It equals the sum of the `self' -fields for the individual functions in the cycle, found in the entry in -the subroutine lines for these functions. - - The `children' fields of the cycle's primary line and subroutine -lines count only subroutines outside the cycle. Even though `a' calls -`b', the time spent in those calls to `b' is not counted in `a''s -`children' time. Thus, we do not encounter the problem of what to do -when the time in those calls to `b' includes indirect recursive calls -back to `a'. - - The `children' field of a caller-line in the cycle's entry estimates -the amount of time spent _in the whole cycle_, and its other -subroutines, on the times when that caller called a function in the -cycle. - - The `called' field in the primary line for the cycle has two numbers: -first, the number of times functions in the cycle were called by -functions outside the cycle; second, the number of times they were -called by functions in the cycle (including times when a function in -the cycle calls itself). This is a generalization of the usual split -into non-recursive and recursive calls. - - The `called' field of a subroutine-line for a cycle member in the -cycle's entry says how many time that function was called from -functions in the cycle. The total of all these is the second number in -the primary line's `called' field. - - In the individual entry for a function in a cycle, the other -functions in the same cycle can appear as subroutines and as callers. -These lines show how many times each function in the cycle called or -was called from each other function in the cycle. The `self' and -`children' fields in these lines are blank because of the difficulty of -defining meanings for them when recursion is going on. - - -File: gprof.info, Node: Line-by-line, Next: Annotated Source, Prev: Call Graph, Up: Output - -5.3 Line-by-line Profiling -========================== - -`gprof''s `-l' option causes the program to perform "line-by-line" -profiling. In this mode, histogram samples are assigned not to -functions, but to individual lines of source code. This only works -with programs compiled with older versions of the `gcc' compiler. -Newer versions of `gcc' use a different program - `gcov' - to display -line-by-line profiling information. - - With the older versions of `gcc' the program usually has to be -compiled with a `-g' option, in addition to `-pg', in order to generate -debugging symbols for tracking source code lines. Note, in much older -versions of `gcc' the program had to be compiled with the `-a' command -line option as well. - - The flat profile is the most useful output table in line-by-line -mode. The call graph isn't as useful as normal, since the current -version of `gprof' does not propagate call graph arcs from source code -lines to the enclosing function. The call graph does, however, show -each line of code that called each function, along with a count. - - Here is a section of `gprof''s output, without line-by-line -profiling. Note that `ct_init' accounted for four histogram hits, and -13327 calls to `init_block'. - - Flat profile: - - Each sample counts as 0.01 seconds. - % cumulative self self total - time seconds seconds calls us/call us/call name - 30.77 0.13 0.04 6335 6.31 6.31 ct_init - - - Call graph (explanation follows) - - - granularity: each sample hit covers 4 byte(s) for 7.69% of 0.13 seconds - - index % time self children called name - - 0.00 0.00 1/13496 name_too_long - 0.00 0.00 40/13496 deflate - 0.00 0.00 128/13496 deflate_fast - 0.00 0.00 13327/13496 ct_init - [7] 0.0 0.00 0.00 13496 init_block - - Now let's look at some of `gprof''s output from the same program run, -this time with line-by-line profiling enabled. Note that `ct_init''s -four histogram hits are broken down into four lines of source code--one -hit occurred on each of lines 349, 351, 382 and 385. In the call graph, -note how `ct_init''s 13327 calls to `init_block' are broken down into -one call from line 396, 3071 calls from line 384, 3730 calls from line -385, and 6525 calls from 387. - - Flat profile: - - Each sample counts as 0.01 seconds. - % cumulative self - time seconds seconds calls name - 7.69 0.10 0.01 ct_init (trees.c:349) - 7.69 0.11 0.01 ct_init (trees.c:351) - 7.69 0.12 0.01 ct_init (trees.c:382) - 7.69 0.13 0.01 ct_init (trees.c:385) - - - Call graph (explanation follows) - - - granularity: each sample hit covers 4 byte(s) for 7.69% of 0.13 seconds - - % time self children called name - - 0.00 0.00 1/13496 name_too_long (gzip.c:1440) - 0.00 0.00 1/13496 deflate (deflate.c:763) - 0.00 0.00 1/13496 ct_init (trees.c:396) - 0.00 0.00 2/13496 deflate (deflate.c:727) - 0.00 0.00 4/13496 deflate (deflate.c:686) - 0.00 0.00 5/13496 deflate (deflate.c:675) - 0.00 0.00 12/13496 deflate (deflate.c:679) - 0.00 0.00 16/13496 deflate (deflate.c:730) - 0.00 0.00 128/13496 deflate_fast (deflate.c:654) - 0.00 0.00 3071/13496 ct_init (trees.c:384) - 0.00 0.00 3730/13496 ct_init (trees.c:385) - 0.00 0.00 6525/13496 ct_init (trees.c:387) - [6] 0.0 0.00 0.00 13496 init_block (trees.c:408) - - -File: gprof.info, Node: Annotated Source, Prev: Line-by-line, Up: Output - -5.4 The Annotated Source Listing -================================ - -`gprof''s `-A' option triggers an annotated source listing, which lists -the program's source code, each function labeled with the number of -times it was called. You may also need to specify the `-I' option, if -`gprof' can't find the source code files. - - With older versions of `gcc' compiling with `gcc ... -g -pg -a' -augments your program with basic-block counting code, in addition to -function counting code. This enables `gprof' to determine how many -times each line of code was executed. With newer versions of `gcc' -support for displaying basic-block counts is provided by the `gcov' -program. - - For example, consider the following function, taken from gzip, with -line numbers added: - - 1 ulg updcrc(s, n) - 2 uch *s; - 3 unsigned n; - 4 { - 5 register ulg c; - 6 - 7 static ulg crc = (ulg)0xffffffffL; - 8 - 9 if (s == NULL) { - 10 c = 0xffffffffL; - 11 } else { - 12 c = crc; - 13 if (n) do { - 14 c = crc_32_tab[...]; - 15 } while (--n); - 16 } - 17 crc = c; - 18 return c ^ 0xffffffffL; - 19 } - - `updcrc' has at least five basic-blocks. One is the function -itself. The `if' statement on line 9 generates two more basic-blocks, -one for each branch of the `if'. A fourth basic-block results from the -`if' on line 13, and the contents of the `do' loop form the fifth -basic-block. The compiler may also generate additional basic-blocks to -handle various special cases. - - A program augmented for basic-block counting can be analyzed with -`gprof -l -A'. The `-x' option is also helpful, to ensure that each -line of code is labeled at least once. Here is `updcrc''s annotated -source listing for a sample `gzip' run: - - ulg updcrc(s, n) - uch *s; - unsigned n; - 2 ->{ - register ulg c; - - static ulg crc = (ulg)0xffffffffL; - - 2 -> if (s == NULL) { - 1 -> c = 0xffffffffL; - 1 -> } else { - 1 -> c = crc; - 1 -> if (n) do { - 26312 -> c = crc_32_tab[...]; - 26312,1,26311 -> } while (--n); - } - 2 -> crc = c; - 2 -> return c ^ 0xffffffffL; - 2 ->} - - In this example, the function was called twice, passing once through -each branch of the `if' statement. The body of the `do' loop was -executed a total of 26312 times. Note how the `while' statement is -annotated. It began execution 26312 times, once for each iteration -through the loop. One of those times (the last time) it exited, while -it branched back to the beginning of the loop 26311 times. - - -File: gprof.info, Node: Inaccuracy, Next: How do I?, Prev: Output, Up: Top - -6 Inaccuracy of `gprof' Output -****************************** - -* Menu: - -* Sampling Error:: Statistical margins of error -* Assumptions:: Estimating children times - - -File: gprof.info, Node: Sampling Error, Next: Assumptions, Up: Inaccuracy - -6.1 Statistical Sampling Error -============================== - -The run-time figures that `gprof' gives you are based on a sampling -process, so they are subject to statistical inaccuracy. If a function -runs only a small amount of time, so that on the average the sampling -process ought to catch that function in the act only once, there is a -pretty good chance it will actually find that function zero times, or -twice. - - By contrast, the number-of-calls and basic-block figures are derived -by counting, not sampling. They are completely accurate and will not -vary from run to run if your program is deterministic. - - The "sampling period" that is printed at the beginning of the flat -profile says how often samples are taken. The rule of thumb is that a -run-time figure is accurate if it is considerably bigger than the -sampling period. - - The actual amount of error can be predicted. For N samples, the -_expected_ error is the square-root of N. For example, if the sampling -period is 0.01 seconds and `foo''s run-time is 1 second, N is 100 -samples (1 second/0.01 seconds), sqrt(N) is 10 samples, so the expected -error in `foo''s run-time is 0.1 seconds (10*0.01 seconds), or ten -percent of the observed value. Again, if the sampling period is 0.01 -seconds and `bar''s run-time is 100 seconds, N is 10000 samples, -sqrt(N) is 100 samples, so the expected error in `bar''s run-time is 1 -second, or one percent of the observed value. It is likely to vary -this much _on the average_ from one profiling run to the next. -(_Sometimes_ it will vary more.) - - This does not mean that a small run-time figure is devoid of -information. If the program's _total_ run-time is large, a small -run-time for one function does tell you that that function used an -insignificant fraction of the whole program's time. Usually this means -it is not worth optimizing. - - One way to get more accuracy is to give your program more (but -similar) input data so it will take longer. Another way is to combine -the data from several runs, using the `-s' option of `gprof'. Here is -how: - - 1. Run your program once. - - 2. Issue the command `mv gmon.out gmon.sum'. - - 3. Run your program again, the same as before. - - 4. Merge the new data in `gmon.out' into `gmon.sum' with this command: - - gprof -s EXECUTABLE-FILE gmon.out gmon.sum - - 5. Repeat the last two steps as often as you wish. - - 6. Analyze the cumulative data using this command: - - gprof EXECUTABLE-FILE gmon.sum > OUTPUT-FILE - - -File: gprof.info, Node: Assumptions, Prev: Sampling Error, Up: Inaccuracy - -6.2 Estimating `children' Times -=============================== - -Some of the figures in the call graph are estimates--for example, the -`children' time values and all the time figures in caller and -subroutine lines. - - There is no direct information about these measurements in the -profile data itself. Instead, `gprof' estimates them by making an -assumption about your program that might or might not be true. - - The assumption made is that the average time spent in each call to -any function `foo' is not correlated with who called `foo'. If `foo' -used 5 seconds in all, and 2/5 of the calls to `foo' came from `a', -then `foo' contributes 2 seconds to `a''s `children' time, by -assumption. - - This assumption is usually true enough, but for some programs it is -far from true. Suppose that `foo' returns very quickly when its -argument is zero; suppose that `a' always passes zero as an argument, -while other callers of `foo' pass other arguments. In this program, -all the time spent in `foo' is in the calls from callers other than `a'. -But `gprof' has no way of knowing this; it will blindly and incorrectly -charge 2 seconds of time in `foo' to the children of `a'. - - We hope some day to put more complete data into `gmon.out', so that -this assumption is no longer needed, if we can figure out how. For the -novice, the estimated figures are usually more useful than misleading. - - -File: gprof.info, Node: How do I?, Next: Incompatibilities, Prev: Inaccuracy, Up: Top - -7 Answers to Common Questions -***************************** - -How can I get more exact information about hot spots in my program? - Looking at the per-line call counts only tells part of the story. - Because `gprof' can only report call times and counts by function, - the best way to get finer-grained information on where the program - is spending its time is to re-factor large functions into sequences - of calls to smaller ones. Beware however that this can introduce - artificial hot spots since compiling with `-pg' adds a significant - overhead to function calls. An alternative solution is to use a - non-intrusive profiler, e.g. oprofile. - -How do I find which lines in my program were executed the most times? - Use the `gcov' program. - -How do I find which lines in my program called a particular function? - Use `gprof -l' and lookup the function in the call graph. The - callers will be broken down by function and line number. - -How do I analyze a program that runs for less than a second? - Try using a shell script like this one: - - for i in `seq 1 100`; do - fastprog - mv gmon.out gmon.out.$i - done - - gprof -s fastprog gmon.out.* - - gprof fastprog gmon.sum - - If your program is completely deterministic, all the call counts - will be simple multiples of 100 (i.e., a function called once in - each run will appear with a call count of 100). - - - -File: gprof.info, Node: Incompatibilities, Next: Details, Prev: How do I?, Up: Top - -8 Incompatibilities with Unix `gprof' -************************************* - -GNU `gprof' and Berkeley Unix `gprof' use the same data file -`gmon.out', and provide essentially the same information. But there -are a few differences. - - * GNU `gprof' uses a new, generalized file format with support for - basic-block execution counts and non-realtime histograms. A magic - cookie and version number allows `gprof' to easily identify new - style files. Old BSD-style files can still be read. *Note - Profiling Data File Format: File Format. - - * For a recursive function, Unix `gprof' lists the function as a - parent and as a child, with a `calls' field that lists the number - of recursive calls. GNU `gprof' omits these lines and puts the - number of recursive calls in the primary line. - - * When a function is suppressed from the call graph with `-e', GNU - `gprof' still lists it as a subroutine of functions that call it. - - * GNU `gprof' accepts the `-k' with its argument in the form - `from/to', instead of `from to'. - - * In the annotated source listing, if there are multiple basic - blocks on the same line, GNU `gprof' prints all of their counts, - separated by commas. - - * The blurbs, field widths, and output formats are different. GNU - `gprof' prints blurbs after the tables, so that you can see the - tables without skipping the blurbs. - - -File: gprof.info, Node: Details, Next: GNU Free Documentation License, Prev: Incompatibilities, Up: Top - -9 Details of Profiling -********************** - -* Menu: - -* Implementation:: How a program collects profiling information -* File Format:: Format of `gmon.out' files -* Internals:: `gprof''s internal operation -* Debugging:: Using `gprof''s `-d' option - - -File: gprof.info, Node: Implementation, Next: File Format, Up: Details - -9.1 Implementation of Profiling -=============================== - -Profiling works by changing how every function in your program is -compiled so that when it is called, it will stash away some information -about where it was called from. From this, the profiler can figure out -what function called it, and can count how many times it was called. -This change is made by the compiler when your program is compiled with -the `-pg' option, which causes every function to call `mcount' (or -`_mcount', or `__mcount', depending on the OS and compiler) as one of -its first operations. - - The `mcount' routine, included in the profiling library, is -responsible for recording in an in-memory call graph table both its -parent routine (the child) and its parent's parent. This is typically -done by examining the stack frame to find both the address of the -child, and the return address in the original parent. Since this is a -very machine-dependent operation, `mcount' itself is typically a short -assembly-language stub routine that extracts the required information, -and then calls `__mcount_internal' (a normal C function) with two -arguments--`frompc' and `selfpc'. `__mcount_internal' is responsible -for maintaining the in-memory call graph, which records `frompc', -`selfpc', and the number of times each of these call arcs was traversed. - - GCC Version 2 provides a magical function -(`__builtin_return_address'), which allows a generic `mcount' function -to extract the required information from the stack frame. However, on -some architectures, most notably the SPARC, using this builtin can be -very computationally expensive, and an assembly language version of -`mcount' is used for performance reasons. - - Number-of-calls information for library routines is collected by -using a special version of the C library. The programs in it are the -same as in the usual C library, but they were compiled with `-pg'. If -you link your program with `gcc ... -pg', it automatically uses the -profiling version of the library. - - Profiling also involves watching your program as it runs, and -keeping a histogram of where the program counter happens to be every -now and then. Typically the program counter is looked at around 100 -times per second of run time, but the exact frequency may vary from -system to system. - - This is done is one of two ways. Most UNIX-like operating systems -provide a `profil()' system call, which registers a memory array with -the kernel, along with a scale factor that determines how the program's -address space maps into the array. Typical scaling values cause every -2 to 8 bytes of address space to map into a single array slot. On -every tick of the system clock (assuming the profiled program is -running), the value of the program counter is examined and the -corresponding slot in the memory array is incremented. Since this is -done in the kernel, which had to interrupt the process anyway to handle -the clock interrupt, very little additional system overhead is required. - - However, some operating systems, most notably Linux 2.0 (and -earlier), do not provide a `profil()' system call. On such a system, -arrangements are made for the kernel to periodically deliver a signal -to the process (typically via `setitimer()'), which then performs the -same operation of examining the program counter and incrementing a slot -in the memory array. Since this method requires a signal to be -delivered to user space every time a sample is taken, it uses -considerably more overhead than kernel-based profiling. Also, due to -the added delay required to deliver the signal, this method is less -accurate as well. - - A special startup routine allocates memory for the histogram and -either calls `profil()' or sets up a clock signal handler. This -routine (`monstartup') can be invoked in several ways. On Linux -systems, a special profiling startup file `gcrt0.o', which invokes -`monstartup' before `main', is used instead of the default `crt0.o'. -Use of this special startup file is one of the effects of using `gcc -... -pg' to link. On SPARC systems, no special startup files are used. -Rather, the `mcount' routine, when it is invoked for the first time -(typically when `main' is called), calls `monstartup'. - - If the compiler's `-a' option was used, basic-block counting is also -enabled. Each object file is then compiled with a static array of -counts, initially zero. In the executable code, every time a new -basic-block begins (i.e., when an `if' statement appears), an extra -instruction is inserted to increment the corresponding count in the -array. At compile time, a paired array was constructed that recorded -the starting address of each basic-block. Taken together, the two -arrays record the starting address of every basic-block, along with the -number of times it was executed. - - The profiling library also includes a function (`mcleanup') which is -typically registered using `atexit()' to be called as the program -exits, and is responsible for writing the file `gmon.out'. Profiling -is turned off, various headers are output, and the histogram is -written, followed by the call-graph arcs and the basic-block counts. - - The output from `gprof' gives no indication of parts of your program -that are limited by I/O or swapping bandwidth. This is because samples -of the program counter are taken at fixed intervals of the program's -run time. Therefore, the time measurements in `gprof' output say -nothing about time that your program was not running. For example, a -part of the program that creates so much data that it cannot all fit in -physical memory at once may run very slowly due to thrashing, but -`gprof' will say it uses little time. On the other hand, sampling by -run time has the advantage that the amount of load due to other users -won't directly affect the output you get. - - -File: gprof.info, Node: File Format, Next: Internals, Prev: Implementation, Up: Details - -9.2 Profiling Data File Format -============================== - -The old BSD-derived file format used for profile data does not contain a -magic cookie that allows to check whether a data file really is a -`gprof' file. Furthermore, it does not provide a version number, thus -rendering changes to the file format almost impossible. GNU `gprof' -uses a new file format that provides these features. For backward -compatibility, GNU `gprof' continues to support the old BSD-derived -format, but not all features are supported with it. For example, -basic-block execution counts cannot be accommodated by the old file -format. - - The new file format is defined in header file `gmon_out.h'. It -consists of a header containing the magic cookie and a version number, -as well as some spare bytes available for future extensions. All data -in a profile data file is in the native format of the target for which -the profile was collected. GNU `gprof' adapts automatically to the -byte-order in use. - - In the new file format, the header is followed by a sequence of -records. Currently, there are three different record types: histogram -records, call-graph arc records, and basic-block execution count -records. Each file can contain any number of each record type. When -reading a file, GNU `gprof' will ensure records of the same type are -compatible with each other and compute the union of all records. For -example, for basic-block execution counts, the union is simply the sum -of all execution counts for each basic-block. - -9.2.1 Histogram Records ------------------------ - -Histogram records consist of a header that is followed by an array of -bins. The header contains the text-segment range that the histogram -spans, the size of the histogram in bytes (unlike in the old BSD -format, this does not include the size of the header), the rate of the -profiling clock, and the physical dimension that the bin counts -represent after being scaled by the profiling clock rate. The physical -dimension is specified in two parts: a long name of up to 15 characters -and a single character abbreviation. For example, a histogram -representing real-time would specify the long name as "seconds" and the -abbreviation as "s". This feature is useful for architectures that -support performance monitor hardware (which, fortunately, is becoming -increasingly common). For example, under DEC OSF/1, the "uprofile" -command can be used to produce a histogram of, say, instruction cache -misses. In this case, the dimension in the histogram header could be -set to "i-cache misses" and the abbreviation could be set to "1" -(because it is simply a count, not a physical dimension). Also, the -profiling rate would have to be set to 1 in this case. - - Histogram bins are 16-bit numbers and each bin represent an equal -amount of text-space. For example, if the text-segment is one thousand -bytes long and if there are ten bins in the histogram, each bin -represents one hundred bytes. - -9.2.2 Call-Graph Records ------------------------- - -Call-graph records have a format that is identical to the one used in -the BSD-derived file format. It consists of an arc in the call graph -and a count indicating the number of times the arc was traversed during -program execution. Arcs are specified by a pair of addresses: the -first must be within caller's function and the second must be within -the callee's function. When performing profiling at the function -level, these addresses can point anywhere within the respective -function. However, when profiling at the line-level, it is better if -the addresses are as close to the call-site/entry-point as possible. -This will ensure that the line-level call-graph is able to identify -exactly which line of source code performed calls to a function. - -9.2.3 Basic-Block Execution Count Records ------------------------------------------ - -Basic-block execution count records consist of a header followed by a -sequence of address/count pairs. The header simply specifies the -length of the sequence. In an address/count pair, the address -identifies a basic-block and the count specifies the number of times -that basic-block was executed. Any address within the basic-address can -be used. - - -File: gprof.info, Node: Internals, Next: Debugging, Prev: File Format, Up: Details - -9.3 `gprof''s Internal Operation -================================ - -Like most programs, `gprof' begins by processing its options. During -this stage, it may building its symspec list (`sym_ids.c:sym_id_add'), -if options are specified which use symspecs. `gprof' maintains a -single linked list of symspecs, which will eventually get turned into -12 symbol tables, organized into six include/exclude pairs--one pair -each for the flat profile (INCL_FLAT/EXCL_FLAT), the call graph arcs -(INCL_ARCS/EXCL_ARCS), printing in the call graph -(INCL_GRAPH/EXCL_GRAPH), timing propagation in the call graph -(INCL_TIME/EXCL_TIME), the annotated source listing -(INCL_ANNO/EXCL_ANNO), and the execution count listing -(INCL_EXEC/EXCL_EXEC). - - After option processing, `gprof' finishes building the symspec list -by adding all the symspecs in `default_excluded_list' to the exclude -lists EXCL_TIME and EXCL_GRAPH, and if line-by-line profiling is -specified, EXCL_FLAT as well. These default excludes are not added to -EXCL_ANNO, EXCL_ARCS, and EXCL_EXEC. - - Next, the BFD library is called to open the object file, verify that -it is an object file, and read its symbol table (`core.c:core_init'), -using `bfd_canonicalize_symtab' after mallocing an appropriately sized -array of symbols. At this point, function mappings are read (if the -`--file-ordering' option has been specified), and the core text space -is read into memory (if the `-c' option was given). - - `gprof''s own symbol table, an array of Sym structures, is now built. -This is done in one of two ways, by one of two routines, depending on -whether line-by-line profiling (`-l' option) has been enabled. For -normal profiling, the BFD canonical symbol table is scanned. For -line-by-line profiling, every text space address is examined, and a new -symbol table entry gets created every time the line number changes. In -either case, two passes are made through the symbol table--one to count -the size of the symbol table required, and the other to actually read -the symbols. In between the two passes, a single array of type `Sym' -is created of the appropriate length. Finally, -`symtab.c:symtab_finalize' is called to sort the symbol table and -remove duplicate entries (entries with the same memory address). - - The symbol table must be a contiguous array for two reasons. First, -the `qsort' library function (which sorts an array) will be used to -sort the symbol table. Also, the symbol lookup routine -(`symtab.c:sym_lookup'), which finds symbols based on memory address, -uses a binary search algorithm which requires the symbol table to be a -sorted array. Function symbols are indicated with an `is_func' flag. -Line number symbols have no special flags set. Additionally, a symbol -can have an `is_static' flag to indicate that it is a local symbol. - - With the symbol table read, the symspecs can now be translated into -Syms (`sym_ids.c:sym_id_parse'). Remember that a single symspec can -match multiple symbols. An array of symbol tables (`syms') is created, -each entry of which is a symbol table of Syms to be included or -excluded from a particular listing. The master symbol table and the -symspecs are examined by nested loops, and every symbol that matches a -symspec is inserted into the appropriate syms table. This is done -twice, once to count the size of each required symbol table, and again -to build the tables, which have been malloced between passes. From now -on, to determine whether a symbol is on an include or exclude symspec -list, `gprof' simply uses its standard symbol lookup routine on the -appropriate table in the `syms' array. - - Now the profile data file(s) themselves are read -(`gmon_io.c:gmon_out_read'), first by checking for a new-style -`gmon.out' header, then assuming this is an old-style BSD `gmon.out' if -the magic number test failed. - - New-style histogram records are read by `hist.c:hist_read_rec'. For -the first histogram record, allocate a memory array to hold all the -bins, and read them in. When multiple profile data files (or files -with multiple histogram records) are read, the memory ranges of each -pair of histogram records must be either equal, or non-overlapping. -For each pair of histogram records, the resolution (memory region size -divided by the number of bins) must be the same. The time unit must be -the same for all histogram records. If the above containts are met, all -histograms for the same memory range are merged. - - As each call graph record is read (`call_graph.c:cg_read_rec'), the -parent and child addresses are matched to symbol table entries, and a -call graph arc is created by `cg_arcs.c:arc_add', unless the arc fails -a symspec check against INCL_ARCS/EXCL_ARCS. As each arc is added, a -linked list is maintained of the parent's child arcs, and of the child's -parent arcs. Both the child's call count and the arc's call count are -incremented by the record's call count. - - Basic-block records are read (`basic_blocks.c:bb_read_rec'), but -only if line-by-line profiling has been selected. Each basic-block -address is matched to a corresponding line symbol in the symbol table, -and an entry made in the symbol's bb_addr and bb_calls arrays. Again, -if multiple basic-block records are present for the same address, the -call counts are cumulative. - - A gmon.sum file is dumped, if requested (`gmon_io.c:gmon_out_write'). - - If histograms were present in the data files, assign them to symbols -(`hist.c:hist_assign_samples') by iterating over all the sample bins -and assigning them to symbols. Since the symbol table is sorted in -order of ascending memory addresses, we can simple follow along in the -symbol table as we make our pass over the sample bins. This step -includes a symspec check against INCL_FLAT/EXCL_FLAT. Depending on the -histogram scale factor, a sample bin may span multiple symbols, in -which case a fraction of the sample count is allocated to each symbol, -proportional to the degree of overlap. This effect is rare for normal -profiling, but overlaps are more common during line-by-line profiling, -and can cause each of two adjacent lines to be credited with half a -hit, for example. - - If call graph data is present, `cg_arcs.c:cg_assemble' is called. -First, if `-c' was specified, a machine-dependent routine (`find_call') -scans through each symbol's machine code, looking for subroutine call -instructions, and adding them to the call graph with a zero call count. -A topological sort is performed by depth-first numbering all the -symbols (`cg_dfn.c:cg_dfn'), so that children are always numbered less -than their parents, then making a array of pointers into the symbol -table and sorting it into numerical order, which is reverse topological -order (children appear before parents). Cycles are also detected at -this point, all members of which are assigned the same topological -number. Two passes are now made through this sorted array of symbol -pointers. The first pass, from end to beginning (parents to children), -computes the fraction of child time to propagate to each parent and a -print flag. The print flag reflects symspec handling of -INCL_GRAPH/EXCL_GRAPH, with a parent's include or exclude (print or no -print) property being propagated to its children, unless they -themselves explicitly appear in INCL_GRAPH or EXCL_GRAPH. A second -pass, from beginning to end (children to parents) actually propagates -the timings along the call graph, subject to a check against -INCL_TIME/EXCL_TIME. With the print flag, fractions, and timings now -stored in the symbol structures, the topological sort array is now -discarded, and a new array of pointers is assembled, this time sorted -by propagated time. - - Finally, print the various outputs the user requested, which is now -fairly straightforward. The call graph (`cg_print.c:cg_print') and -flat profile (`hist.c:hist_print') are regurgitations of values already -computed. The annotated source listing -(`basic_blocks.c:print_annotated_source') uses basic-block information, -if present, to label each line of code with call counts, otherwise only -the function call counts are presented. - - The function ordering code is marginally well documented in the -source code itself (`cg_print.c'). Basically, the functions with the -most use and the most parents are placed first, followed by other -functions with the most use, followed by lower use functions, followed -by unused functions at the end. - - -File: gprof.info, Node: Debugging, Prev: Internals, Up: Details - -9.4 Debugging `gprof' -===================== - -If `gprof' was compiled with debugging enabled, the `-d' option -triggers debugging output (to stdout) which can be helpful in -understanding its operation. The debugging number specified is -interpreted as a sum of the following options: - -2 - Topological sort - Monitor depth-first numbering of symbols during call graph analysis - -4 - Cycles - Shows symbols as they are identified as cycle heads - -16 - Tallying - As the call graph arcs are read, show each arc and how the total - calls to each function are tallied - -32 - Call graph arc sorting - Details sorting individual parents/children within each call graph - entry - -64 - Reading histogram and call graph records - Shows address ranges of histograms as they are read, and each call - graph arc - -128 - Symbol table - Reading, classifying, and sorting the symbol table from the object - file. For line-by-line profiling (`-l' option), also shows line - numbers being assigned to memory addresses. - -256 - Static call graph - Trace operation of `-c' option - -512 - Symbol table and arc table lookups - Detail operation of lookup routines - -1024 - Call graph propagation - Shows how function times are propagated along the call graph - -2048 - Basic-blocks - Shows basic-block records as they are read from profile data (only - meaningful with `-l' option) - -4096 - Symspecs - Shows symspec-to-symbol pattern matching operation - -8192 - Annotate source - Tracks operation of `-A' option - - -File: gprof.info, Node: GNU Free Documentation License, Prev: Details, Up: Top - -Appendix A GNU Free Documentation License -***************************************** - - Version 1.1, March 2000 - - Copyright (C) 2000, 2003 Free Software Foundation, Inc. - 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA - - Everyone is permitted to copy and distribute verbatim copies - of this license document, but changing it is not allowed. - - - 0. PREAMBLE - - The purpose of this License is to make a manual, textbook, or other - written document "free" in the sense of freedom: to assure everyone - the effective freedom to copy and redistribute it, with or without - modifying it, either commercially or noncommercially. Secondarily, - this License preserves for the author and publisher a way to get - credit for their work, while not being considered responsible for - modifications made by others. - - This License is a kind of "copyleft", which means that derivative - works of the document must themselves be free in the same sense. - It complements the GNU General Public License, which is a copyleft - license designed for free software. - - We have designed this License in order to use it for manuals for - free software, because free software needs free documentation: a - free program should come with manuals providing the same freedoms - that the software does. But this License is not limited to - software manuals; it can be used for any textual work, regardless - of subject matter or whether it is published as a printed book. - We recommend this License principally for works whose purpose is - instruction or reference. - - - 1. APPLICABILITY AND DEFINITIONS - - This License applies to any manual or other work that contains a - notice placed by the copyright holder saying it can be distributed - under the terms of this License. The "Document", below, refers to - any such manual or work. Any member of the public is a licensee, - and is addressed as "you." - - A "Modified Version" of the Document means any work containing the - Document or a portion of it, either copied verbatim, or with - modifications and/or translated into another language. - - A "Secondary Section" is a named appendix or a front-matter - section of the Document that deals exclusively with the - relationship of the publishers or authors of the Document to the - Document's overall subject (or to related matters) and contains - nothing that could fall directly within that overall subject. - (For example, if the Document is in part a textbook of - mathematics, a Secondary Section may not explain any mathematics.) - The relationship could be a matter of historical connection with - the subject or with related matters, or of legal, commercial, - philosophical, ethical or political position regarding them. - - The "Invariant Sections" are certain Secondary Sections whose - titles are designated, as being those of Invariant Sections, in - the notice that says that the Document is released under this - License. - - The "Cover Texts" are certain short passages of text that are - listed, as Front-Cover Texts or Back-Cover Texts, in the notice - that says that the Document is released under this License. - - A "Transparent" copy of the Document means a machine-readable copy, - represented in a format whose specification is available to the - general public, whose contents can be viewed and edited directly - and straightforwardly with generic text editors or (for images - composed of pixels) generic paint programs or (for drawings) some - widely available drawing editor, and that is suitable for input to - text formatters or for automatic translation to a variety of - formats suitable for input to text formatters. A copy made in an - otherwise Transparent file format whose markup has been designed - to thwart or discourage subsequent modification by readers is not - Transparent. A copy that is not "Transparent" is called "Opaque." - - Examples of suitable formats for Transparent copies include plain - ASCII without markup, Texinfo input format, LaTeX input format, - SGML or XML using a publicly available DTD, and - standard-conforming simple HTML designed for human modification. - Opaque formats include PostScript, PDF, proprietary formats that - can be read and edited only by proprietary word processors, SGML - or XML for which the DTD and/or processing tools are not generally - available, and the machine-generated HTML produced by some word - processors for output purposes only. - - The "Title Page" means, for a printed book, the title page itself, - plus such following pages as are needed to hold, legibly, the - material this License requires to appear in the title page. For - works in formats which do not have any title page as such, "Title - Page" means the text near the most prominent appearance of the - work's title, preceding the beginning of the body of the text. - - 2. VERBATIM COPYING - - You may copy and distribute the Document in any medium, either - commercially or noncommercially, provided that this License, the - copyright notices, and the license notice saying this License - applies to the Document are reproduced in all copies, and that you - add no other conditions whatsoever to those of this License. You - may not use technical measures to obstruct or control the reading - or further copying of the copies you make or distribute. However, - you may accept compensation in exchange for copies. If you - distribute a large enough number of copies you must also follow - the conditions in section 3. - - You may also lend copies, under the same conditions stated above, - and you may publicly display copies. - - 3. COPYING IN QUANTITY - - If you publish printed copies of the Document numbering more than - 100, and the Document's license notice requires Cover Texts, you - must enclose the copies in covers that carry, clearly and legibly, - all these Cover Texts: Front-Cover Texts on the front cover, and - Back-Cover Texts on the back cover. Both covers must also clearly - and legibly identify you as the publisher of these copies. The - front cover must present the full title with all words of the - title equally prominent and visible. You may add other material - on the covers in addition. Copying with changes limited to the - covers, as long as they preserve the title of the Document and - satisfy these conditions, can be treated as verbatim copying in - other respects. - - If the required texts for either cover are too voluminous to fit - legibly, you should put the first ones listed (as many as fit - reasonably) on the actual cover, and continue the rest onto - adjacent pages. - - If you publish or distribute Opaque copies of the Document - numbering more than 100, you must either include a - machine-readable Transparent copy along with each Opaque copy, or - state in or with each Opaque copy a publicly-accessible - computer-network location containing a complete Transparent copy - of the Document, free of added material, which the general - network-using public has access to download anonymously at no - charge using public-standard network protocols. If you use the - latter option, you must take reasonably prudent steps, when you - begin distribution of Opaque copies in quantity, to ensure that - this Transparent copy will remain thus accessible at the stated - location until at least one year after the last time you - distribute an Opaque copy (directly or through your agents or - retailers) of that edition to the public. - - It is requested, but not required, that you contact the authors of - the Document well before redistributing any large number of - copies, to give them a chance to provide you with an updated - version of the Document. - - 4. MODIFICATIONS - - You may copy and distribute a Modified Version of the Document - under the conditions of sections 2 and 3 above, provided that you - release the Modified Version under precisely this License, with - the Modified Version filling the role of the Document, thus - licensing distribution and modification of the Modified Version to - whoever possesses a copy of it. In addition, you must do these - things in the Modified Version: - - A. Use in the Title Page (and on the covers, if any) a title - distinct from that of the Document, and from those of previous - versions (which should, if there were any, be listed in the - History section of the Document). You may use the same title - as a previous version if the original publisher of that version - gives permission. - B. List on the Title Page, as authors, one or more persons or - entities responsible for authorship of the modifications in the - Modified Version, together with at least five of the principal - authors of the Document (all of its principal authors, if it - has less than five). - C. State on the Title page the name of the publisher of the - Modified Version, as the publisher. - D. Preserve all the copyright notices of the Document. - E. Add an appropriate copyright notice for your modifications - adjacent to the other copyright notices. - F. Include, immediately after the copyright notices, a license - notice giving the public permission to use the Modified Version - under the terms of this License, in the form shown in the - Addendum below. - G. Preserve in that license notice the full lists of Invariant - Sections and required Cover Texts given in the Document's - license notice. - H. Include an unaltered copy of this License. - I. Preserve the section entitled "History", and its title, and add - to it an item stating at least the title, year, new authors, and - publisher of the Modified Version as given on the Title Page. - If there is no section entitled "History" in the Document, - create one stating the title, year, authors, and publisher of - the Document as given on its Title Page, then add an item - describing the Modified Version as stated in the previous - sentence. - J. Preserve the network location, if any, given in the Document for - public access to a Transparent copy of the Document, and - likewise the network locations given in the Document for - previous versions it was based on. These may be placed in the - "History" section. You may omit a network location for a work - that was published at least four years before the Document - itself, or if the original publisher of the version it refers - to gives permission. - K. In any section entitled "Acknowledgements" or "Dedications", - preserve the section's title, and preserve in the section all the - substance and tone of each of the contributor acknowledgements - and/or dedications given therein. - L. Preserve all the Invariant Sections of the Document, - unaltered in their text and in their titles. Section numbers - or the equivalent are not considered part of the section titles. - M. Delete any section entitled "Endorsements." Such a section - may not be included in the Modified Version. - N. Do not retitle any existing section as "Endorsements" or to - conflict in title with any Invariant Section. - - If the Modified Version includes new front-matter sections or - appendices that qualify as Secondary Sections and contain no - material copied from the Document, you may at your option - designate some or all of these sections as invariant. To do this, - add their titles to the list of Invariant Sections in the Modified - Version's license notice. These titles must be distinct from any - other section titles. - - You may add a section entitled "Endorsements", provided it contains - nothing but endorsements of your Modified Version by various - parties-for example, statements of peer review or that the text has - been approved by an organization as the authoritative definition - of a standard. - - You may add a passage of up to five words as a Front-Cover Text, - and a passage of up to 25 words as a Back-Cover Text, to the end - of the list of Cover Texts in the Modified Version. Only one - passage of Front-Cover Text and one of Back-Cover Text may be - added by (or through arrangements made by) any one entity. If the - Document already includes a cover text for the same cover, - previously added by you or by arrangement made by the same entity - you are acting on behalf of, you may not add another; but you may - replace the old one, on explicit permission from the previous - publisher that added the old one. - - The author(s) and publisher(s) of the Document do not by this - License give permission to use their names for publicity for or to - assert or imply endorsement of any Modified Version. - - 5. COMBINING DOCUMENTS - - You may combine the Document with other documents released under - this License, under the terms defined in section 4 above for - modified versions, provided that you include in the combination - all of the Invariant Sections of all of the original documents, - unmodified, and list them all as Invariant Sections of your - combined work in its license notice. - - The combined work need only contain one copy of this License, and - multiple identical Invariant Sections may be replaced with a single - copy. If there are multiple Invariant Sections with the same name - but different contents, make the title of each such section unique - by adding at the end of it, in parentheses, the name of the - original author or publisher of that section if known, or else a - unique number. Make the same adjustment to the section titles in - the list of Invariant Sections in the license notice of the - combined work. - - In the combination, you must combine any sections entitled - "History" in the various original documents, forming one section - entitled "History"; likewise combine any sections entitled - "Acknowledgements", and any sections entitled "Dedications." You - must delete all sections entitled "Endorsements." - - 6. COLLECTIONS OF DOCUMENTS - - You may make a collection consisting of the Document and other - documents released under this License, and replace the individual - copies of this License in the various documents with a single copy - that is included in the collection, provided that you follow the - rules of this License for verbatim copying of each of the - documents in all other respects. - - You may extract a single document from such a collection, and - distribute it individually under this License, provided you insert - a copy of this License into the extracted document, and follow - this License in all other respects regarding verbatim copying of - that document. - - 7. AGGREGATION WITH INDEPENDENT WORKS - - A compilation of the Document or its derivatives with other - separate and independent documents or works, in or on a volume of - a storage or distribution medium, does not as a whole count as a - Modified Version of the Document, provided no compilation - copyright is claimed for the compilation. Such a compilation is - called an "aggregate", and this License does not apply to the - other self-contained works thus compiled with the Document, on - account of their being thus compiled, if they are not themselves - derivative works of the Document. - - If the Cover Text requirement of section 3 is applicable to these - copies of the Document, then if the Document is less than one - quarter of the entire aggregate, the Document's Cover Texts may be - placed on covers that surround only the Document within the - aggregate. Otherwise they must appear on covers around the whole - aggregate. - - 8. TRANSLATION - - Translation is considered a kind of modification, so you may - distribute translations of the Document under the terms of section - 4. Replacing Invariant Sections with translations requires special - permission from their copyright holders, but you may include - translations of some or all Invariant Sections in addition to the - original versions of these Invariant Sections. You may include a - translation of this License provided that you also include the - original English version of this License. In case of a - disagreement between the translation and the original English - version of this License, the original English version will prevail. - - 9. TERMINATION - - You may not copy, modify, sublicense, or distribute the Document - except as expressly provided for under this License. Any other - attempt to copy, modify, sublicense or distribute the Document is - void, and will automatically terminate your rights under this - License. However, parties who have received copies, or rights, - from you under this License will not have their licenses - terminated so long as such parties remain in full compliance. - - 10. FUTURE REVISIONS OF THIS LICENSE - - The Free Software Foundation may publish new, revised versions of - the GNU Free Documentation License from time to time. Such new - versions will be similar in spirit to the present version, but may - differ in detail to address new problems or concerns. See - http://www.gnu.org/copyleft/. - - Each version of the License is given a distinguishing version - number. If the Document specifies that a particular numbered - version of this License "or any later version" applies to it, you - have the option of following the terms and conditions either of - that specified version or of any later version that has been - published (not as a draft) by the Free Software Foundation. If - the Document does not specify a version number of this License, - you may choose any version ever published (not as a draft) by the - Free Software Foundation. - - -ADDENDUM: How to use this License for your documents -==================================================== - -To use this License in a document you have written, include a copy of -the License in the document and put the following copyright and license -notices just after the title page: - - Copyright (C) YEAR YOUR NAME. - Permission is granted to copy, distribute and/or modify this document - under the terms of the GNU Free Documentation License, Version 1.1 - or any later version published by the Free Software Foundation; - with the Invariant Sections being LIST THEIR TITLES, with the - Front-Cover Texts being LIST, and with the Back-Cover Texts being LIST. - A copy of the license is included in the section entitled "GNU - Free Documentation License." - - If you have no Invariant Sections, write "with no Invariant Sections" -instead of saying which ones are invariant. If you have no Front-Cover -Texts, write "no Front-Cover Texts" instead of "Front-Cover Texts being -LIST"; likewise for Back-Cover Texts. - - If your document contains nontrivial examples of program code, we -recommend releasing these examples in parallel under your choice of -free software license, such as the GNU General Public License, to -permit their use in free software. - - - -Tag Table: -Node: Top719 -Node: Introduction2033 -Node: Compiling4525 -Node: Executing7996 -Node: Invoking10784 -Node: Output Options12199 -Node: Analysis Options19288 -Node: Miscellaneous Options22689 -Node: Deprecated Options23944 -Node: Symspecs26023 -Node: Output27849 -Node: Flat Profile28889 -Node: Call Graph33842 -Node: Primary37074 -Node: Callers39662 -Node: Subroutines41779 -Node: Cycles43620 -Node: Line-by-line50397 -Node: Annotated Source54470 -Node: Inaccuracy57469 -Node: Sampling Error57727 -Node: Assumptions60297 -Node: How do I?61767 -Node: Incompatibilities63321 -Node: Details64815 -Node: Implementation65208 -Node: File Format71105 -Node: Internals75395 -Node: Debugging83890 -Node: GNU Free Documentation License85491 - -End Tag Table