Fix TMI copyright attributions

[tinyos-2.x.git] / tos / chips / msp430 / usci / HplMsp430UsciInt0P.nc

diff --git a/tos/chips/msp430/usci/HplMsp430UsciInt0P.nc b/tos/chips/msp430/usci/HplMsp430UsciInt0P.nc
index 9e69649cd7701f039c4fa3e132a562e394d956bd..feb75cc14d7f86a9ebe3ba4e17bba51a1723f6da 100644 (file)
--- a/tos/chips/msp430/usci/HplMsp430UsciInt0P.nc
+++ b/tos/chips/msp430/usci/HplMsp430UsciInt0P.nc
@@ -10,7 +10,7 @@
  * - Redistributions in binary form must reproduce the above copyright
  *   notice, this list of conditions and the following disclaimer in the
  *   documentation and/or other materials provided with the distribution.
- * - Neither the name of the Technische Universität Berlin nor the names
+ * - Neither the name of the Titanium Mirror, Inc. nor the names
  *   of its contributors may be used to endorse or promote products derived
  *   from this software without specific prior written permission.
  *
@@ -26,13 +26,13 @@
  * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
  * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
  */
- 
+
 /**
  * HPL interrupt interface for the USCI0 peripheral.
- * 
+ *
  * @author R. Steve McKown <rsmckown@gmail.com>
  */
- 
+
 #include "Msp430Usci.h"
 #include "msp430hardware.h"
 
@@ -91,7 +91,7 @@ implementation
     } else if (READ_FLAG(UCB0STAT, UCNACKIFG)) {
       CLR_FLAG(UCB0STAT, UCNACKIFG);
       CLR_FLAG(UC0IFG, UCB0TXIFG); /* Errata USCI25; 'reset' means clear? */
-      signal IntB.i2cNak();
+      signal IntB.i2cNack();
     } else if (READ_FLAG(UCB0STAT, UCSTTIFG)) {
       CLR_FLAG(UCB0STAT, UCSTTIFG);
       signal IntB.i2cStart();
@@ -100,15 +100,19 @@ implementation
       signal IntB.i2cStop();
     }
   }
-  
+
   /* This interrupt vector signals transmit events.  USCI_A0 can receive events
    * for UART and SPI modes, while USCI_B0 can receive events for I2C and SPI
    * modes.
    */
   TOSH_SIGNAL(USCIAB0TX_VECTOR) {
-    if (READ_FLAG(UC0IFG & UC0IE, UCB0RXIE))
-      signal IntB.rx(UCB0RXBUF); /* I2C receive */
-    else if (READ_FLAG(UC0IFG & UC0IE, UCA0TXIFG))
+    if (READ_FLAG(UC0IFG & UC0IE, UCB0RXIE)) {
+      /* I2C receive.  Do not read UCB0RXBUF here, as the code receiving
+       * IntB.rx() may first need to set stop and/or start bits.  The receiver
+       * must read UCB0RXBUF.
+       */
+      signal IntB.rx(0);
+    } else if (READ_FLAG(UC0IFG & UC0IE, UCA0TXIFG))
       signal IntA.tx();
     else if (READ_FLAG(UC0IFG & UC0IE, UCB0TXIFG))
       signal IntB.tx();
@@ -119,7 +123,7 @@ implementation
   default async event void IntA.tx() {}
   /* i2c is not available for A devices, so the below are never signalled */
   default async event void IntA.i2cCal() {}
-  default async event void IntA.i2cNak() {}
+  default async event void IntA.i2cNack() {}
   default async event void IntA.i2cStart() {}
   default async event void IntA.i2cStop() {}
 
@@ -128,7 +132,7 @@ implementation
   default async event void IntB.rx(uint8_t byte) {}
   default async event void IntB.tx() {}
   default async event void IntB.i2cCal() {}
-  default async event void IntB.i2cNak() {}
+  default async event void IntB.i2cNack() {}
   default async event void IntB.i2cStart() {}
   default async event void IntB.i2cStop() {}
 }