-Tx != 0
-Rx == 0
-This app sends a message from Tx to 0 and waits 1000 ms between each delivery
-so the Rx mote's radio shuts back off and has to redetect to receive the next
-message.
+Author/Contact: tinyos-help@millennium.berkeley.edu
+Description:
+To compile for motes with CC2420 radios, you must do:
+ env CFLAGS="-DLOW_POWER_LISTENING" make <platform>
-EXPECTATIONS
-Transmitter #1
- * Transmitting for 1000 ms, and then pause for 1000 ms.
- * Will cut transmission short if using Ack LPL and the receiver gets the msg
- * Led0 indicates transmission
- * Transmitter receive check interval once every 1000 ms
-
-Receiver #0
- * Receive check interval once every 1000 ms
- * Led1 indicates final reception
+Install the application to two nodes with the following ID's:
+ Node 0 (Receiver node): id = 0
+ Node 1 (Transmitter node): id = 1 (or.. id > 0)
-Led2 is left up to DutyCycleP to toggle when the radio is on.
+This app sends a message from Transmitter node to
+the recevier node and waits 1000 ms between each
+delivery so the Rx mote's radio shuts back off and
+has to redetect to receive the next message.
+
+
+EXPECTED OUTPUT
+ Transmitter Node:
+ * Toggles its led0 every second.
+ - led0 ON indicates transmission, which lasts
+ for much shorter than a second. When the
+ receiver performs its receive check, the transmitter
+ stops delivering the message.
+
+ Receiver Node:
+ * led1 toggles once a second, indicating reception.
+
+
+Tools:
+
+None.
+
+Known bugs/limitations:
+
+None.
+
+
+$Id$
\ No newline at end of file