removed deprecated LowPowerListening.nc

diff --git a/tos/chips/cc1000/LowPowerListening.nc b/tos/chips/cc1000/LowPowerListening.nc
deleted file mode 100644 (file)
index 6fd5d19..0000000
--- a/tos/chips/cc1000/LowPowerListening.nc
+++ /dev/null
@@ -1,131 +0,0 @@
-/*
- * Copyright (c) 2005-2006 Rincon Research Corporation
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in the
- *   documentation and/or other materials provided with the
- *   distribution.
- * - Neither the name of the Arch Rock Corporation nor the names of
- *   its contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
- * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE
- */
- 
-/**
- * Low Power Listening interface
- *
- * @author David Moss
- * @author Jonathan Hui
- */
-
-#include <message.h>
- 
-interface LowPowerListening {
-
-  /**
-   * Set this this node's radio sleep interval, in milliseconds.
-   * Once every interval, the node will sleep and perform an Rx check 
-   * on the radio.  Setting the sleep interval to 0 will keep the radio
-   * always on.
-   *
-   * This is the equivalent of setting the local duty cycle rate.
-   *
-   * @param sleepIntervalMs the length of this node's Rx check interval, in [ms]
-   */
-  command void setLocalSleepInterval(uint16_t sleepIntervalMs);
-  
-  /**
-   * @return the local node's sleep interval, in [ms]
-   */
-  command uint16_t getLocalSleepInterval();
-  
-  /**
-   * Set this node's radio duty cycle rate, in units of [percentage*100].
-   * For example, to get a 0.05% duty cycle,
-   * <code>
-   *   call LowPowerListening.setDutyCycle(5);  // or equivalently...
-   *   call LowPowerListening.setDutyCycle(00005);  // for better readability?
-   * </code>
-   *
-   * For a 100% duty cycle (always on),
-   * <code>
-   *   call LowPowerListening.setDutyCycle(10000);
-   * </code>
-   *
-   * This is the equivalent of setting the local sleep interval explicitly.
-   * 
-   * @param dutyCycle The duty cycle percentage, in units of [percentage*100]
-   */
-  command void setLocalDutyCycle(uint16_t dutyCycle);
-  
-  /**
-   * @return this node's radio duty cycle rate, in units of [percentage*100]
-   */
-  command uint16_t getLocalDutyCycle();
-  
-  
-  /**
-   * Configure this outgoing message so it can be transmitted to a neighbor mote
-   * with the specified Rx sleep interval.
-   * @param 'message_t* ONE msg' Pointer to the message that will be sent
-   * @param sleepInterval The receiving node's sleep interval, in [ms]
-   */
-  command void setRxSleepInterval(message_t *msg, uint16_t sleepIntervalMs);
-  
-  /**
-   * @return the destination node's sleep interval configured in this message
-   */
-  command uint16_t getRxSleepInterval(message_t *msg);
-  
-  /**
-   * Configure this outgoing message so it can be transmitted to a neighbor mote
-   * with the specified Rx duty cycle rate.
-   * Duty cycle is in units of [percentage*100], i.e. 0.25% duty cycle = 25.
-   * 
-   * @param msg Pointer to the message that will be sent
-   * @param dutyCycle The duty cycle of the receiving mote, in units of 
-   *     [percentage*100]
-   */
-  command void setRxDutyCycle(message_t *msg, uint16_t dutyCycle);
-  
-  /**
-   * @return the destination node's duty cycle configured in this message
-   *     in units of [percentage*100]
-   */
-  command uint16_t getRxDutyCycle(message_t *msg);
-  
-  /**
-   * Convert a duty cycle, in units of [percentage*100], to
-   * the sleep interval of the mote in milliseconds
-   * @param dutyCycle The duty cycle in units of [percentage*100]
-   * @return The equivalent sleep interval, in units of [ms]
-   */
-  command uint16_t dutyCycleToSleepInterval(uint16_t dutyCycle);
-  
-  /**
-   * Convert a sleep interval, in units of [ms], to a duty cycle
-   * in units of [percentage*100]
-   * @param sleepInterval The sleep interval in units of [ms]
-   * @return The duty cycle in units of [percentage*100]
-   */
-  command uint16_t sleepIntervalToDutyCycle(uint16_t sleepInterval);
-  
-}