old chip for temp is removed

diff --git a/tos/platforms/mulle/chips/ds2745/DS2745InternalC.nc b/tos/platforms/mulle/chips/ds2745/DS2745InternalC.nc
deleted file mode 100644 (file)
index 673f890..0000000
--- a/tos/platforms/mulle/chips/ds2745/DS2745InternalC.nc
+++ /dev/null
@@ -1,29 +0,0 @@
-/**
- * The DS2745 works well to be used with the DS2782 chip on the Mulle.
- * 
- * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
- */
-
-// TODO(henrik) Clean and comment this code better. Also Make the chip request
-//              access to the I2C bus instead of how its now that the program
-//              needs to request it.
-configuration DS2745InternalC {
-  provides interface SplitControl;
-  provides interface Resource;
-  provides interface HplDS2745;
-}
-
-implementation {
-  components MainC;
-  
-  components new SoftI2CBatteryMonitorRTCC() as I2C;
-  Resource = I2C;
-  
-  components new HplDS2745LogicP(0x68) as Logic;
-  MainC.SoftwareInit -> Logic;
-  Logic.I2CPacket -> I2C;
-  HplDS2745 = Logic;
-
-  SplitControl = Logic;
-
-}

diff --git a/tos/platforms/mulle/chips/ds2745/DS2745InternalP.nc b/tos/platforms/mulle/chips/ds2745/DS2745InternalP.nc
deleted file mode 100644 (file)
index e4845f4..0000000
--- a/tos/platforms/mulle/chips/ds2745/DS2745InternalP.nc
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * Copyright (c) 2005-2006 Arch Rock Corporation
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in the
- *   documentation and/or other materials provided with the
- *   distribution.
- * - Neither the name of the Arched Rock Corporation nor the names of
- *   its contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
- * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE
- */
-
-/**
- * 
- * @author Phil Buonadonna <pbuonadonna@archrock.com>
- * @version $Revision$ $Date$
- */
-
-module DS2745InternalP {
-  provides interface HplDS2745[uint8_t id];
-  uses interface HplDS2745 as ToHPLC;
-}
-
-implementation {
-  uint8_t currentId;
-  
-  command error_t HplDS2745.setConfig[uint8_t id](uint8_t val) {
-    currentId = id;
-    return call ToHPLC.setConfig(val);
-  }
-  command error_t HplDS2745.measureTemperature[uint8_t id]() {
-    currentId = id;
-    return call ToHPLC.measureTemperature();
-  }
-  command error_t HplDS2745.measureVoltage[uint8_t id]() {
-    currentId = id;
-    return call ToHPLC.measureVoltage();
-  }
-  command error_t HplDS2745.measureCurrent[uint8_t id]() {
-    currentId = id;
-    return call ToHPLC.measureCurrent();
-  }
-  command error_t HplDS2745.measureAccCurrent[uint8_t id]() {
-    currentId = id;
-    return call ToHPLC.measureAccCurrent();
-  }
-  command error_t HplDS2745.setOffsetBias[uint8_t id](int8_t val) {
-    currentId = id;
-    return call ToHPLC.setOffsetBias(val);
-  }
-  command error_t HplDS2745.setAccOffsetBias[uint8_t id](int8_t val) {
-    currentId = id;
-    return call ToHPLC.setAccOffsetBias(val);
-  }
-  
-  async event void ToHPLC.setConfigDone(error_t error) {
-    signal HplDS2745.setConfigDone[currentId](error);
-  }
-  async event void ToHPLC.measureTemperatureDone(error_t result, uint16_t val) {
-    signal HplDS2745.measureTemperatureDone[currentId](result, val);
-  }
-  async event void ToHPLC.measureVoltageDone(error_t result, uint16_t val) {
-    signal HplDS2745.measureVoltageDone[currentId](result, val);
-  }
-  async event void ToHPLC.measureCurrentDone(error_t result, uint16_t val) {
-    signal HplDS2745.measureCurrentDone[currentId](result, val);
-  }
-  async event void ToHPLC.measureAccCurrentDone(error_t result, uint16_t val) {
-    signal HplDS2745.measureAccCurrentDone[currentId](result, val);
-  }
-  async event void ToHPLC.setOffsetBiasDone(error_t error) {
-    signal HplDS2745.setOffsetBiasDone[currentId](error);
-  }
-  async event void ToHPLC.setAccOffsetBiasDone(error_t error) {
-    signal HplDS2745.setAccOffsetBiasDone[currentId](error);
-  }
-
-  default async event void HplDS2745.setConfigDone[uint8_t id]( error_t error ){ return; }
-  default async event void HplDS2745.measureTemperatureDone[uint8_t id]( error_t error, uint16_t val ){ return; }
-  default async event void HplDS2745.measureVoltageDone[uint8_t id]( error_t error, uint16_t val ){ return; }
-  default async event void HplDS2745.measureCurrentDone[uint8_t id]( error_t error, uint16_t val ){ return; }
-  default async event void HplDS2745.measureAccCurrentDone[uint8_t id]( error_t error, uint16_t val ){ return; }
-  default async event void HplDS2745.setOffsetBiasDone[uint8_t id]( error_t error ){ return; }
-  default async event void HplDS2745.setAccOffsetBiasDone[uint8_t id](error_t error){ return; }
-
-}
-
-