]> oss.titaniummirror.com Git - tinyos-2.x.git/commitdiff
Removed TestSpiOff - this test was replaced with more sophisticated unit testing...
authorrincon <rincon>
Tue, 10 Jul 2007 16:25:54 +0000 (16:25 +0000)
committerrincon <rincon>
Tue, 10 Jul 2007 16:25:54 +0000 (16:25 +0000)
apps/tests/cc2420/TestSpiOff/Makefile [deleted file]
apps/tests/cc2420/TestSpiOff/README.txt [deleted file]
apps/tests/cc2420/TestSpiOff/SpiOffC.nc [deleted file]
apps/tests/cc2420/TestSpiOff/SpiOffP.nc [deleted file]

diff --git a/apps/tests/cc2420/TestSpiOff/Makefile b/apps/tests/cc2420/TestSpiOff/Makefile
deleted file mode 100644 (file)
index d46e3c4..0000000
+++ /dev/null
@@ -1,3 +0,0 @@
-COMPONENT=SpiOffC
-
-include $(MAKERULES)
diff --git a/apps/tests/cc2420/TestSpiOff/README.txt b/apps/tests/cc2420/TestSpiOff/README.txt
deleted file mode 100644 (file)
index d50189d..0000000
+++ /dev/null
@@ -1,24 +0,0 @@
-
-Test the ability for the radio to duty cycle while sending and receiving
-packets.  The radio should stop accepting requests, the SPI bus be released
-properly, and the radio should shut down.
-
-INSTALLATION
-Transmitter is any mote with ID != 0
-Receiver is any mote with ID == 0
-
-EXPECTATIONS
-The receiver duty cycles its radio faster than the transmitter.
-
-Led0:
-  Transmitter = cannot send
-
-Led1:
-  Transmitter = sent a message
-  Receiver = received a message
-
-Led2:
-  On = radio on
-  Off = radio off
-  
-
diff --git a/apps/tests/cc2420/TestSpiOff/SpiOffC.nc b/apps/tests/cc2420/TestSpiOff/SpiOffC.nc
deleted file mode 100644 (file)
index 44b54d9..0000000
+++ /dev/null
@@ -1,59 +0,0 @@
-/*
- * Copyright (c) 2005-2006 Rincon Research Corporation
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in the
- *   documentation and/or other materials provided with the
- *   distribution.
- * - Neither the name of the Rincon Research Corporation nor the names of
- *   its contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
- * RINCON RESEARCH OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE
- */
-
-/**
- * Transmitter != 0
- * Receiver = 0
- * @author David Moss
- */
-configuration SpiOffC {
-}
-
-implementation {
-  components SpiOffP,
-      MainC,
-      new TimerMilliC(),
-      ActiveMessageC,
-      new AMSenderC(0),
-      new AMReceiverC(0),
-      LedsC;
-      
-  SpiOffP.Boot -> MainC;
-  SpiOffP.Timer -> TimerMilliC;
-  SpiOffP.SplitControl -> ActiveMessageC;
-  SpiOffP.AMSend -> AMSenderC;
-  SpiOffP.Receive -> AMReceiverC;
-  SpiOffP.AMPacket -> ActiveMessageC;
-  SpiOffP.Leds -> LedsC;
-  
-}
-
diff --git a/apps/tests/cc2420/TestSpiOff/SpiOffP.nc b/apps/tests/cc2420/TestSpiOff/SpiOffP.nc
deleted file mode 100644 (file)
index fb5a06c..0000000
+++ /dev/null
@@ -1,129 +0,0 @@
-/*
- * Copyright (c) 2005-2006 Rincon Research Corporation
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * - Redistributions of source code must retain the above copyright
- *   notice, this list of conditions and the following disclaimer.
- * - Redistributions in binary form must reproduce the above copyright
- *   notice, this list of conditions and the following disclaimer in the
- *   documentation and/or other materials provided with the
- *   distribution.
- * - Neither the name of the Rincon Research Corporation nor the names of
- *   its contributors may be used to endorse or promote products derived
- *   from this software without specific prior written permission.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE
- * RINCON RESEARCH OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
- * OF THE POSSIBILITY OF SUCH DAMAGE
- */
-
-/** 
- * @author David Moss
- */
-
-module SpiOffP {
-  uses {
-    interface Boot;
-    interface Timer<TMilli>;
-    interface AMSend;
-    interface Receive;
-    interface Leds;
-    interface SplitControl;
-    interface AMPacket;
-  }
-}
-
-implementation {
-  
-  message_t myMsg;
-  
-  bool radioOn;
-  
-  /***************** Prototypes ****************/
-  task void send();
-  task void on();
-  task void off();
-  
-  /***************** Boot Events ****************/
-  event void Boot.booted() {
-    radioOn = FALSE;
-    
-    if(call AMPacket.address() != 0) {
-      call Timer.startPeriodic(768);
-      post send();
-      
-    } else {
-      call Timer.startPeriodic(128);
-    }
-  }
-  
-  /***************** SplitControl Events ****************/
-  event void SplitControl.startDone(error_t error) {
-    call Leds.led2On();
-    radioOn = TRUE;
-  }
-  
-  event void SplitControl.stopDone(error_t error) {
-    call Leds.set(0);
-    radioOn = FALSE;
-  }
-  
-  /***************** Send Events ****************/
-  event void AMSend.sendDone(message_t *msg, error_t error) {
-    call Leds.led1Toggle();
-    post send();
-  }
-  
-  /***************** Receive Events ****************/
-  event message_t *Receive.receive(message_t *msg, void *payload, uint8_t len) {
-    call Leds.led1Toggle();
-    return msg;
-  }
-  
-  /***************** Timer Events *****************/
-  event void Timer.fired() {
-    if(radioOn) {
-      post off();
-    } else {
-      post on();
-    }
-  }
-  
-  /***************** Tasks ****************/
-  task void send() {
-    if(call AMSend.send(0, &myMsg, 28) != SUCCESS) {
-      call Leds.led1Off();
-      call Leds.led0Toggle();
-      post send();
-      
-    } else {
-      call Leds.led0Off();
-    }
-  }
-  
-  task void on() {
-    if(call SplitControl.start() != SUCCESS) {
-      post on();
-    }
-  }
-  
-  task void off() {
-    if(call SplitControl.stop() != SUCCESS) {
-      post off();
-    }
-  }
-}
-
-