+This is a sample application for Deluge T2. The program blinks and
+sends a serial message every second. On a testbed equipped with a
+serial back-channel the following test can be run:
+ 1) Compile and burn the program on all the motes on the
+ testbed. The serial messages send by the motes is one-byte value
+ of 0.
+ 2) Compile and burn a base station. This can be done by adding
+ CFLAGS=-DDELUGE_BASESTATION to the make command. For telosb this
+ will look like this:
+ CFLAGS=-DDELUGE_BASESTATION make telosb
+ 3) Compile a different version of SerialBlink by adding
+ CFLAGS=-DBLINK_REVERSE to the make command. For telosb this
+ will look like this:
+ CFLAGS=-DBLINK_REVERSE make telosb
+ 4) Upload the new SerialBlink to the base station. For a telosb
+ connected to /dev/ttyUSB0 this can be accomplish using this
+ command:
+ tos-deluge /dev/ttyUSB0 telosb -i 1 build/telosb/tos_image.xml
+ 5) Give the command to disseminate-and-reboot:
+ tos-deluge /dev/ttyUSB0 telosb -dr 1
+
+As the motes get and reprogram with the new image they will start
+sending on the serial a one-byte value of 2.