/* tc-i386.c -- Assemble code for the Intel 80386
Copyright 1989, 1991, 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999,
- 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007
+ 2000, 2001, 2002, 2003, 2004, 2005, 2006, 2007, 2008, 2009
Free Software Foundation, Inc.
This file is part of GAS, the GNU Assembler.
#include "dwarf2dbg.h"
#include "dw2gencfi.h"
#include "elf/x86-64.h"
+#include "opcodes/i386-init.h"
#ifndef REGISTER_WARNINGS
#define REGISTER_WARNINGS 1
#define INFER_ADDR_PREFIX 1
#endif
-#ifndef SCALE1_WHEN_NO_INDEX
-/* Specifying a scale factor besides 1 when there is no index is
- futile. eg. `mov (%ebx,2),%al' does exactly the same as
- `mov (%ebx),%al'. To slavishly follow what the programmer
- specified, set SCALE1_WHEN_NO_INDEX to 0. */
-#define SCALE1_WHEN_NO_INDEX 1
-#endif
-
#ifndef DEFAULT_ARCH
#define DEFAULT_ARCH "i386"
#endif
#endif
#endif
+/* Prefixes will be emitted in the order defined below.
+ WAIT_PREFIX must be the first prefix since FWAIT is really is an
+ instruction, and so must come before any prefixes.
+ The preferred prefix order is SEG_PREFIX, ADDR_PREFIX, DATA_PREFIX,
+ LOCKREP_PREFIX. */
+#define WAIT_PREFIX 0
+#define SEG_PREFIX 1
+#define ADDR_PREFIX 2
+#define DATA_PREFIX 3
+#define LOCKREP_PREFIX 4
+#define REX_PREFIX 5 /* must come last. */
+#define MAX_PREFIXES 6 /* max prefixes per opcode */
+
+/* we define the syntax here (modulo base,index,scale syntax) */
+#define REGISTER_PREFIX '%'
+#define IMMEDIATE_PREFIX '$'
+#define ABSOLUTE_PREFIX '*'
+
+/* these are the instruction mnemonic suffixes in AT&T syntax or
+ memory operand size in Intel syntax. */
+#define WORD_MNEM_SUFFIX 'w'
+#define BYTE_MNEM_SUFFIX 'b'
+#define SHORT_MNEM_SUFFIX 's'
+#define LONG_MNEM_SUFFIX 'l'
+#define QWORD_MNEM_SUFFIX 'q'
+#define XMMWORD_MNEM_SUFFIX 'x'
+#define YMMWORD_MNEM_SUFFIX 'y'
+/* Intel Syntax. Use a non-ascii letter since since it never appears
+ in instructions. */
+#define LONG_DOUBLE_MNEM_SUFFIX '\1'
+
+#define END_OF_INSN '\0'
+
+/*
+ 'templates' is for grouping together 'template' structures for opcodes
+ of the same name. This is only used for storing the insns in the grand
+ ole hash table of insns.
+ The templates themselves start at START and range up to (but not including)
+ END.
+ */
+typedef struct
+{
+ const insn_template *start;
+ const insn_template *end;
+}
+templates;
+
+/* 386 operand encoding bytes: see 386 book for details of this. */
+typedef struct
+{
+ unsigned int regmem; /* codes register or memory operand */
+ unsigned int reg; /* codes register operand (or extended opcode) */
+ unsigned int mode; /* how to interpret regmem & reg */
+}
+modrm_byte;
+
+/* x86-64 extension prefix. */
+typedef int rex_byte;
+
+/* 386 opcode byte to code indirect addressing. */
+typedef struct
+{
+ unsigned base;
+ unsigned index;
+ unsigned scale;
+}
+sib_byte;
+
+/* x86 arch names, types and features */
+typedef struct
+{
+ const char *name; /* arch name */
+ enum processor_type type; /* arch type */
+ i386_cpu_flags flags; /* cpu feature flags */
+}
+arch_entry;
+
static void set_code_flag (int);
static void set_16bit_gcc_code_flag (int);
static void set_intel_syntax (int);
+static void set_intel_mnemonic (int);
+static void set_allow_index_reg (int);
+static void set_sse_check (int);
static void set_cpu_arch (int);
#ifdef TE_PE
static void pe_directive_secrel (int);
#endif
static void signed_cons (int);
static char *output_invalid (int c);
-static int i386_operand (char *);
+static int i386_finalize_immediate (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_finalize_displacement (segT, expressionS *, i386_operand_type,
+ const char *);
+static int i386_att_operand (char *);
static int i386_intel_operand (char *, int);
+static int i386_intel_simplify (expressionS *);
+static int i386_intel_parse_name (const char *, expressionS *);
static const reg_entry *parse_register (char *, char **);
static char *parse_insn (char *, char *);
static char *parse_operands (char *, const char *);
static void swap_2_operands (int, int);
static void optimize_imm (void);
static void optimize_disp (void);
-static int match_template (void);
+static const insn_template *match_template (void);
static int check_string (void);
static int process_suffix (void);
static int check_byte_reg (void);
static const char *default_arch = DEFAULT_ARCH;
+/* VEX prefix. */
+typedef struct
+{
+ /* VEX prefix is either 2 byte or 3 byte. */
+ unsigned char bytes[3];
+ unsigned int length;
+ /* Destination or source register specifier. */
+ const reg_entry *register_specifier;
+} vex_prefix;
+
/* 'md_assemble ()' gathers together information and puts it into a
i386_insn. */
struct _i386_insn
{
/* TM holds the template for the insn were currently assembling. */
- template tm;
+ insn_template tm;
- /* SUFFIX holds the instruction mnemonic suffix if given.
- (e.g. 'l' for 'movl') */
+ /* SUFFIX holds the instruction size suffix for byte, word, dword
+ or qword, if given. */
char suffix;
/* OPERANDS gives the number of given operands. */
/* TYPES [i] is the type (see above #defines) which tells us how to
use OP[i] for the corresponding operand. */
- unsigned int types[MAX_OPERANDS];
+ i386_operand_type types[MAX_OPERANDS];
/* Displacement expression, immediate expression, or register for each
operand. */
/* RM and SIB are the modrm byte and the sib byte where the
addressing modes of this insn are encoded. */
-
modrm_byte rm;
rex_byte rex;
sib_byte sib;
+ vex_prefix vex;
+
+ /* Swap operand in encoding. */
+ unsigned int swap_operand : 1;
};
typedef struct _i386_insn i386_insn;
static expressionS im_expressions[MAX_IMMEDIATE_OPERANDS];
/* Current operand we are working on. */
-static int this_operand;
+static int this_operand = -1;
/* We support four different modes. FLAG_CODE variable is used to distinguish
these. */
CODE_32BIT,
CODE_16BIT,
CODE_64BIT };
-#define NUM_FLAG_CODE ((int) CODE_64BIT + 1)
static enum flag_code flag_code;
static unsigned int object_64bit;
0 if att syntax. */
static int intel_syntax = 0;
+/* 1 for intel mnemonic,
+ 0 if att mnemonic. */
+static int intel_mnemonic = !SYSV386_COMPAT;
+
+/* 1 if support old (<= 2.8.1) versions of gcc. */
+static int old_gcc = OLDGCC_COMPAT;
+
+/* 1 if pseudo registers are permitted. */
+static int allow_pseudo_reg = 0;
+
/* 1 if register prefix % not required. */
static int allow_naked_reg = 0;
+/* 1 if pseudo index register, eiz/riz, is allowed . */
+static int allow_index_reg = 0;
+
+static enum
+ {
+ sse_check_none = 0,
+ sse_check_warning,
+ sse_check_error
+ }
+sse_check;
+
/* Register prefix used for error message. */
static const char *register_prefix = "%";
/* CPU name. */
static const char *cpu_arch_name = NULL;
-static const char *cpu_sub_arch_name = NULL;
+static char *cpu_sub_arch_name = NULL;
/* CPU feature flags. */
-static unsigned int cpu_arch_flags = CpuUnknownFlags | CpuNo64;
+static i386_cpu_flags cpu_arch_flags = CPU_UNKNOWN_FLAGS;
/* If we have selected a cpu we are generating instructions for. */
static int cpu_arch_tune_set = 0;
/* Cpu we are generating instructions for. */
-static enum processor_type cpu_arch_tune = PROCESSOR_UNKNOWN;
+enum processor_type cpu_arch_tune = PROCESSOR_UNKNOWN;
/* CPU feature flags of cpu we are generating instructions for. */
-static unsigned int cpu_arch_tune_flags = 0;
+static i386_cpu_flags cpu_arch_tune_flags;
/* CPU instruction set architecture used. */
-static enum processor_type cpu_arch_isa = PROCESSOR_UNKNOWN;
+enum processor_type cpu_arch_isa = PROCESSOR_UNKNOWN;
/* CPU feature flags of instruction set architecture used. */
-static unsigned int cpu_arch_isa_flags = 0;
+i386_cpu_flags cpu_arch_isa_flags;
/* If set, conditional jumps are not automatically promoted to handle
larger than a byte offset. */
static unsigned int no_cond_jump_promotion = 0;
+/* Encode SSE instructions with VEX prefix. */
+static unsigned int sse2avx;
+
/* Pre-defined "_GLOBAL_OFFSET_TABLE_". */
static symbolS *GOT_symbol;
static const arch_entry cpu_arch[] =
{
- {"generic32", PROCESSOR_GENERIC32,
- Cpu186|Cpu286|Cpu386},
- {"generic64", PROCESSOR_GENERIC64,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2},
- {"i8086", PROCESSOR_UNKNOWN,
- 0},
- {"i186", PROCESSOR_UNKNOWN,
- Cpu186},
- {"i286", PROCESSOR_UNKNOWN,
- Cpu186|Cpu286},
- {"i386", PROCESSOR_I386,
- Cpu186|Cpu286|Cpu386},
- {"i486", PROCESSOR_I486,
- Cpu186|Cpu286|Cpu386|Cpu486},
- {"i586", PROCESSOR_PENTIUM,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586},
- {"i686", PROCESSOR_PENTIUMPRO,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686},
- {"pentium", PROCESSOR_PENTIUM,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586},
- {"pentiumpro",PROCESSOR_PENTIUMPRO,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686},
- {"pentiumii", PROCESSOR_PENTIUMPRO,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX},
- {"pentiumiii",PROCESSOR_PENTIUMPRO,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuMMX|CpuMMX2|CpuSSE},
- {"pentium4", PROCESSOR_PENTIUM4,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2},
- {"prescott", PROCESSOR_NOCONA,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3},
- {"nocona", PROCESSOR_NOCONA,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3},
- {"yonah", PROCESSOR_CORE,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3},
- {"core", PROCESSOR_CORE,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3},
- {"merom", PROCESSOR_CORE2,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSSE3},
- {"core2", PROCESSOR_CORE2,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuP4|CpuMMX
- |CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSSE3},
- {"k6", PROCESSOR_K6,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX},
- {"k6_2", PROCESSOR_K6,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|CpuK6|CpuMMX|Cpu3dnow},
- {"athlon", PROCESSOR_ATHLON,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6
- |CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA},
- {"sledgehammer", PROCESSOR_K8,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6
- |CpuSledgehammer|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2},
- {"opteron", PROCESSOR_K8,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6
- |CpuSledgehammer|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2},
- {"k8", PROCESSOR_K8,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6
- |CpuSledgehammer|CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2},
- {"amdfam10", PROCESSOR_AMDFAM10,
- Cpu186|Cpu286|Cpu386|Cpu486|Cpu586|Cpu686|CpuK6|CpuSledgehammer
- |CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA|CpuSSE|CpuSSE2|CpuSSE3|CpuSSE4a
- |CpuABM},
- {".mmx", PROCESSOR_UNKNOWN,
- CpuMMX},
- {".sse", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE},
- {".sse2", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2},
- {".sse3", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3},
- {".ssse3", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSSE3},
- {".sse4.1", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSSE3|CpuSSE4_1},
- {".sse4.2", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSSE3|CpuSSE4},
- {".sse4", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSSE3|CpuSSE4},
- {".3dnow", PROCESSOR_UNKNOWN,
- CpuMMX|Cpu3dnow},
- {".3dnowa", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|Cpu3dnow|Cpu3dnowA},
- {".padlock", PROCESSOR_UNKNOWN,
- CpuPadLock},
- {".pacifica", PROCESSOR_UNKNOWN,
- CpuSVME},
- {".svme", PROCESSOR_UNKNOWN,
- CpuSVME},
- {".sse4a", PROCESSOR_UNKNOWN,
- CpuMMX|CpuMMX2|CpuSSE|CpuSSE2|CpuSSE3|CpuSSE4a},
- {".abm", PROCESSOR_UNKNOWN,
- CpuABM}
+ { "generic32", PROCESSOR_GENERIC32,
+ CPU_GENERIC32_FLAGS },
+ { "generic64", PROCESSOR_GENERIC64,
+ CPU_GENERIC64_FLAGS },
+ { "i8086", PROCESSOR_UNKNOWN,
+ CPU_NONE_FLAGS },
+ { "i186", PROCESSOR_UNKNOWN,
+ CPU_I186_FLAGS },
+ { "i286", PROCESSOR_UNKNOWN,
+ CPU_I286_FLAGS },
+ { "i386", PROCESSOR_I386,
+ CPU_I386_FLAGS },
+ { "i486", PROCESSOR_I486,
+ CPU_I486_FLAGS },
+ { "i586", PROCESSOR_PENTIUM,
+ CPU_I586_FLAGS },
+ { "i686", PROCESSOR_PENTIUMPRO,
+ CPU_I686_FLAGS },
+ { "pentium", PROCESSOR_PENTIUM,
+ CPU_I586_FLAGS },
+ { "pentiumpro", PROCESSOR_PENTIUMPRO,
+ CPU_I686_FLAGS },
+ { "pentiumii", PROCESSOR_PENTIUMPRO,
+ CPU_P2_FLAGS },
+ { "pentiumiii",PROCESSOR_PENTIUMPRO,
+ CPU_P3_FLAGS },
+ { "pentium4", PROCESSOR_PENTIUM4,
+ CPU_P4_FLAGS },
+ { "prescott", PROCESSOR_NOCONA,
+ CPU_CORE_FLAGS },
+ { "nocona", PROCESSOR_NOCONA,
+ CPU_NOCONA_FLAGS },
+ { "yonah", PROCESSOR_CORE,
+ CPU_CORE_FLAGS },
+ { "core", PROCESSOR_CORE,
+ CPU_CORE_FLAGS },
+ { "merom", PROCESSOR_CORE2,
+ CPU_CORE2_FLAGS },
+ { "core2", PROCESSOR_CORE2,
+ CPU_CORE2_FLAGS },
+ { "corei7", PROCESSOR_COREI7,
+ CPU_COREI7_FLAGS },
+ { "l1om", PROCESSOR_L1OM,
+ CPU_L1OM_FLAGS },
+ { "k6", PROCESSOR_K6,
+ CPU_K6_FLAGS },
+ { "k6_2", PROCESSOR_K6,
+ CPU_K6_2_FLAGS },
+ { "athlon", PROCESSOR_ATHLON,
+ CPU_ATHLON_FLAGS },
+ { "sledgehammer", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "opteron", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "k8", PROCESSOR_K8,
+ CPU_K8_FLAGS },
+ { "amdfam10", PROCESSOR_AMDFAM10,
+ CPU_AMDFAM10_FLAGS },
+ { ".8087", PROCESSOR_UNKNOWN,
+ CPU_8087_FLAGS },
+ { ".287", PROCESSOR_UNKNOWN,
+ CPU_287_FLAGS },
+ { ".387", PROCESSOR_UNKNOWN,
+ CPU_387_FLAGS },
+ { ".no87", PROCESSOR_UNKNOWN,
+ CPU_ANY87_FLAGS },
+ { ".mmx", PROCESSOR_UNKNOWN,
+ CPU_MMX_FLAGS },
+ { ".nommx", PROCESSOR_UNKNOWN,
+ CPU_3DNOWA_FLAGS },
+ { ".sse", PROCESSOR_UNKNOWN,
+ CPU_SSE_FLAGS },
+ { ".sse2", PROCESSOR_UNKNOWN,
+ CPU_SSE2_FLAGS },
+ { ".sse3", PROCESSOR_UNKNOWN,
+ CPU_SSE3_FLAGS },
+ { ".ssse3", PROCESSOR_UNKNOWN,
+ CPU_SSSE3_FLAGS },
+ { ".sse4.1", PROCESSOR_UNKNOWN,
+ CPU_SSE4_1_FLAGS },
+ { ".sse4.2", PROCESSOR_UNKNOWN,
+ CPU_SSE4_2_FLAGS },
+ { ".sse4", PROCESSOR_UNKNOWN,
+ CPU_SSE4_2_FLAGS },
+ { ".nosse", PROCESSOR_UNKNOWN,
+ CPU_ANY_SSE_FLAGS },
+ { ".avx", PROCESSOR_UNKNOWN,
+ CPU_AVX_FLAGS },
+ { ".noavx", PROCESSOR_UNKNOWN,
+ CPU_ANY_AVX_FLAGS },
+ { ".vmx", PROCESSOR_UNKNOWN,
+ CPU_VMX_FLAGS },
+ { ".smx", PROCESSOR_UNKNOWN,
+ CPU_SMX_FLAGS },
+ { ".xsave", PROCESSOR_UNKNOWN,
+ CPU_XSAVE_FLAGS },
+ { ".aes", PROCESSOR_UNKNOWN,
+ CPU_AES_FLAGS },
+ { ".pclmul", PROCESSOR_UNKNOWN,
+ CPU_PCLMUL_FLAGS },
+ { ".clmul", PROCESSOR_UNKNOWN,
+ CPU_PCLMUL_FLAGS },
+ { ".fma", PROCESSOR_UNKNOWN,
+ CPU_FMA_FLAGS },
+ { ".fma4", PROCESSOR_UNKNOWN,
+ CPU_FMA4_FLAGS },
+ { ".movbe", PROCESSOR_UNKNOWN,
+ CPU_MOVBE_FLAGS },
+ { ".ept", PROCESSOR_UNKNOWN,
+ CPU_EPT_FLAGS },
+ { ".clflush", PROCESSOR_UNKNOWN,
+ CPU_CLFLUSH_FLAGS },
+ { ".syscall", PROCESSOR_UNKNOWN,
+ CPU_SYSCALL_FLAGS },
+ { ".rdtscp", PROCESSOR_UNKNOWN,
+ CPU_RDTSCP_FLAGS },
+ { ".3dnow", PROCESSOR_UNKNOWN,
+ CPU_3DNOW_FLAGS },
+ { ".3dnowa", PROCESSOR_UNKNOWN,
+ CPU_3DNOWA_FLAGS },
+ { ".padlock", PROCESSOR_UNKNOWN,
+ CPU_PADLOCK_FLAGS },
+ { ".pacifica", PROCESSOR_UNKNOWN,
+ CPU_SVME_FLAGS },
+ { ".svme", PROCESSOR_UNKNOWN,
+ CPU_SVME_FLAGS },
+ { ".sse4a", PROCESSOR_UNKNOWN,
+ CPU_SSE4A_FLAGS },
+ { ".abm", PROCESSOR_UNKNOWN,
+ CPU_ABM_FLAGS },
};
+#ifdef I386COFF
+/* Like s_lcomm_internal in gas/read.c but the alignment string
+ is allowed to be optional. */
+
+static symbolS *
+pe_lcomm_internal (int needs_align, symbolS *symbolP, addressT size)
+{
+ addressT align = 0;
+
+ SKIP_WHITESPACE ();
+
+ if (needs_align
+ && *input_line_pointer == ',')
+ {
+ align = parse_align (needs_align - 1);
+
+ if (align == (addressT) -1)
+ return NULL;
+ }
+ else
+ {
+ if (size >= 8)
+ align = 3;
+ else if (size >= 4)
+ align = 2;
+ else if (size >= 2)
+ align = 1;
+ else
+ align = 0;
+ }
+
+ bss_alloc (symbolP, size, align);
+ return symbolP;
+}
+
+static void
+pe_lcomm (int needs_align)
+{
+ s_comm_internal (needs_align * 2, pe_lcomm_internal);
+}
+#endif
+
const pseudo_typeS md_pseudo_table[] =
{
#if !defined(OBJ_AOUT) && !defined(USE_ALIGN_PTWO)
{"arch", set_cpu_arch, 0},
#ifndef I386COFF
{"bss", s_bss, 0},
+#else
+ {"lcomm", pe_lcomm, 1},
#endif
{"ffloat", float_cons, 'f'},
{"dfloat", float_cons, 'd'},
{"code64", set_code_flag, CODE_64BIT},
{"intel_syntax", set_intel_syntax, 1},
{"att_syntax", set_intel_syntax, 0},
+ {"intel_mnemonic", set_intel_mnemonic, 1},
+ {"att_mnemonic", set_intel_mnemonic, 0},
+ {"allow_index_reg", set_allow_index_reg, 1},
+ {"disallow_index_reg", set_allow_index_reg, 0},
+ {"sse_check", set_sse_check, 0},
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
{"largecomm", handle_large_common, 0},
#else
1. For PROCESSOR_I386, PROCESSOR_I486, PROCESSOR_PENTIUM and
PROCESSOR_GENERIC32, f32_patt will be used.
2. For PROCESSOR_PENTIUMPRO, PROCESSOR_PENTIUM4, PROCESSOR_NOCONA,
- PROCESSOR_CORE, PROCESSOR_CORE2, and PROCESSOR_GENERIC64,
- alt_long_patt will be used.
+ PROCESSOR_CORE, PROCESSOR_CORE2, PROCESSOR_COREI7, and
+ PROCESSOR_GENERIC64, alt_long_patt will be used.
3. For PROCESSOR_ATHLON, PROCESSOR_K6, PROCESSOR_K8 and
PROCESSOR_AMDFAM10, alt_short_patt will be used.
{
const char *const *patt = NULL;
- if (cpu_arch_isa == PROCESSOR_UNKNOWN)
+ if (fragP->tc_frag_data.isa == PROCESSOR_UNKNOWN)
{
/* PROCESSOR_UNKNOWN means that all ISAs may be used. */
switch (cpu_arch_tune)
case PROCESSOR_UNKNOWN:
/* We use cpu_arch_isa_flags to check if we SHOULD
optimize for Cpu686. */
- if ((cpu_arch_isa_flags & Cpu686) != 0)
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
patt = alt_long_patt;
else
patt = f32_patt;
case PROCESSOR_NOCONA:
case PROCESSOR_CORE:
case PROCESSOR_CORE2:
+ case PROCESSOR_COREI7:
+ case PROCESSOR_L1OM:
case PROCESSOR_GENERIC64:
patt = alt_long_patt;
break;
}
else
{
- switch (cpu_arch_tune)
+ switch (fragP->tc_frag_data.tune)
{
case PROCESSOR_UNKNOWN:
- /* When cpu_arch_isa is net, cpu_arch_tune shouldn't be
+ /* When cpu_arch_isa is set, cpu_arch_tune shouldn't be
PROCESSOR_UNKNOWN. */
abort ();
break;
case PROCESSOR_GENERIC32:
/* We use cpu_arch_isa_flags to check if we CAN optimize
for Cpu686. */
- if ((cpu_arch_isa_flags & Cpu686) != 0)
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
patt = alt_short_patt;
else
patt = f32_patt;
case PROCESSOR_NOCONA:
case PROCESSOR_CORE:
case PROCESSOR_CORE2:
- if ((cpu_arch_isa_flags & Cpu686) != 0)
+ case PROCESSOR_COREI7:
+ case PROCESSOR_L1OM:
+ if (fragP->tc_frag_data.isa_flags.bitfield.cpui686)
patt = alt_long_patt;
else
patt = f32_patt;
{
/* If the padding is less than 15 bytes, we use the normal
ones. Otherwise, we use a jump instruction and adjust
- its offset. */
- if (count < 15)
+ its offset. */
+ int limit;
+
+ /* For 64bit, the limit is 3 bytes. */
+ if (flag_code == CODE_64BIT
+ && fragP->tc_frag_data.isa_flags.bitfield.cpulm)
+ limit = 3;
+ else
+ limit = 15;
+ if (count < limit)
memcpy (fragP->fr_literal + fragP->fr_fix,
patt[count - 1], count);
else
fragP->fr_var = count;
}
-static INLINE unsigned int
-mode_from_disp_size (unsigned int t)
+static INLINE int
+operand_type_all_zero (const union i386_operand_type *x)
{
- return (t & Disp8) ? 1 : (t & (Disp16 | Disp32 | Disp32S)) ? 2 : 0;
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2])
+ return 0;
+ case 2:
+ if (x->array[1])
+ return 0;
+ case 1:
+ return !x->array[0];
+ default:
+ abort ();
+ }
}
-static INLINE int
-fits_in_signed_byte (offsetT num)
+static INLINE void
+operand_type_set (union i386_operand_type *x, unsigned int v)
{
- return (num >= -128) && (num <= 127);
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ x->array[2] = v;
+ case 2:
+ x->array[1] = v;
+ case 1:
+ x->array[0] = v;
+ break;
+ default:
+ abort ();
+ }
}
static INLINE int
-fits_in_unsigned_byte (offsetT num)
+operand_type_equal (const union i386_operand_type *x,
+ const union i386_operand_type *y)
{
- return (num & 0xff) == num;
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2] != y->array[2])
+ return 0;
+ case 2:
+ if (x->array[1] != y->array[1])
+ return 0;
+ case 1:
+ return x->array[0] == y->array[0];
+ break;
+ default:
+ abort ();
+ }
}
static INLINE int
-fits_in_unsigned_word (offsetT num)
+cpu_flags_all_zero (const union i386_cpu_flags *x)
{
- return (num & 0xffff) == num;
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2])
+ return 0;
+ case 2:
+ if (x->array[1])
+ return 0;
+ case 1:
+ return !x->array[0];
+ default:
+ abort ();
+ }
}
-static INLINE int
-fits_in_signed_word (offsetT num)
+static INLINE void
+cpu_flags_set (union i386_cpu_flags *x, unsigned int v)
{
- return (-32768 <= num) && (num <= 32767);
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ x->array[2] = v;
+ case 2:
+ x->array[1] = v;
+ case 1:
+ x->array[0] = v;
+ break;
+ default:
+ abort ();
+ }
}
static INLINE int
-fits_in_signed_long (offsetT num ATTRIBUTE_UNUSED)
+cpu_flags_equal (const union i386_cpu_flags *x,
+ const union i386_cpu_flags *y)
{
-#ifndef BFD64
- return 1;
-#else
- return (!(((offsetT) -1 << 31) & num)
- || (((offsetT) -1 << 31) & num) == ((offsetT) -1 << 31));
-#endif
-} /* fits_in_signed_long() */
+ switch (ARRAY_SIZE(x->array))
+ {
+ case 3:
+ if (x->array[2] != y->array[2])
+ return 0;
+ case 2:
+ if (x->array[1] != y->array[1])
+ return 0;
+ case 1:
+ return x->array[0] == y->array[0];
+ break;
+ default:
+ abort ();
+ }
+}
static INLINE int
-fits_in_unsigned_long (offsetT num ATTRIBUTE_UNUSED)
+cpu_flags_check_cpu64 (i386_cpu_flags f)
{
-#ifndef BFD64
- return 1;
-#else
- return (num & (((offsetT) 2 << 31) - 1)) == num;
-#endif
-} /* fits_in_unsigned_long() */
+ return !((flag_code == CODE_64BIT && f.bitfield.cpuno64)
+ || (flag_code != CODE_64BIT && f.bitfield.cpu64));
+}
-static unsigned int
-smallest_imm_type (offsetT num)
+static INLINE i386_cpu_flags
+cpu_flags_and (i386_cpu_flags x, i386_cpu_flags y)
{
- if (cpu_arch_flags != (Cpu186 | Cpu286 | Cpu386 | Cpu486 | CpuNo64))
+ switch (ARRAY_SIZE (x.array))
{
- /* This code is disabled on the 486 because all the Imm1 forms
- in the opcode table are slower on the i486. They're the
- versions with the implicitly specified single-position
- displacement, which has another syntax if you really want to
- use that form. */
- if (num == 1)
- return Imm1 | Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64;
- }
- return (fits_in_signed_byte (num)
- ? (Imm8S | Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
- : fits_in_unsigned_byte (num)
- ? (Imm8 | Imm16 | Imm32 | Imm32S | Imm64)
- : (fits_in_signed_word (num) || fits_in_unsigned_word (num))
- ? (Imm16 | Imm32 | Imm32S | Imm64)
- : fits_in_signed_long (num)
- ? (Imm32 | Imm32S | Imm64)
- : fits_in_unsigned_long (num)
- ? (Imm32 | Imm64)
- : Imm64);
+ case 3:
+ x.array [2] &= y.array [2];
+ case 2:
+ x.array [1] &= y.array [1];
+ case 1:
+ x.array [0] &= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
}
-static offsetT
-offset_in_range (offsetT val, int size)
+static INLINE i386_cpu_flags
+cpu_flags_or (i386_cpu_flags x, i386_cpu_flags y)
{
- addressT mask;
-
- switch (size)
+ switch (ARRAY_SIZE (x.array))
{
- case 1: mask = ((addressT) 1 << 8) - 1; break;
- case 2: mask = ((addressT) 1 << 16) - 1; break;
- case 4: mask = ((addressT) 2 << 31) - 1; break;
-#ifdef BFD64
- case 8: mask = ((addressT) 2 << 63) - 1; break;
-#endif
- default: abort ();
+ case 3:
+ x.array [2] |= y.array [2];
+ case 2:
+ x.array [1] |= y.array [1];
+ case 1:
+ x.array [0] |= y.array [0];
+ break;
+ default:
+ abort ();
}
+ return x;
+}
- /* If BFD64, sign extend val. */
- if (!use_rela_relocations)
- if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
- val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
-
- if ((val & ~mask) != 0 && (val & ~mask) != ~mask)
+static INLINE i386_cpu_flags
+cpu_flags_and_not (i386_cpu_flags x, i386_cpu_flags y)
+{
+ switch (ARRAY_SIZE (x.array))
{
- char buf1[40], buf2[40];
-
- sprint_value (buf1, val);
- sprint_value (buf2, val & mask);
- as_warn (_("%s shortened to %s"), buf1, buf2);
+ case 3:
+ x.array [2] &= ~y.array [2];
+ case 2:
+ x.array [1] &= ~y.array [1];
+ case 1:
+ x.array [0] &= ~y.array [0];
+ break;
+ default:
+ abort ();
}
- return val & mask;
+ return x;
}
-/* Returns 0 if attempting to add a prefix where one from the same
- class already exists, 1 if non rep/repne added, 2 if rep/repne
- added. */
+#define CPU_FLAGS_ARCH_MATCH 0x1
+#define CPU_FLAGS_64BIT_MATCH 0x2
+#define CPU_FLAGS_AES_MATCH 0x4
+#define CPU_FLAGS_PCLMUL_MATCH 0x8
+#define CPU_FLAGS_AVX_MATCH 0x10
+
+#define CPU_FLAGS_32BIT_MATCH \
+ (CPU_FLAGS_ARCH_MATCH | CPU_FLAGS_AES_MATCH \
+ | CPU_FLAGS_PCLMUL_MATCH | CPU_FLAGS_AVX_MATCH)
+#define CPU_FLAGS_PERFECT_MATCH \
+ (CPU_FLAGS_32BIT_MATCH | CPU_FLAGS_64BIT_MATCH)
+
+/* Return CPU flags match bits. */
+
static int
-add_prefix (unsigned int prefix)
+cpu_flags_match (const insn_template *t)
{
- int ret = 1;
- unsigned int q;
+ i386_cpu_flags x = t->cpu_flags;
+ int match = cpu_flags_check_cpu64 (x) ? CPU_FLAGS_64BIT_MATCH : 0;
- if (prefix >= REX_OPCODE && prefix < REX_OPCODE + 16
- && flag_code == CODE_64BIT)
+ x.bitfield.cpu64 = 0;
+ x.bitfield.cpuno64 = 0;
+
+ if (cpu_flags_all_zero (&x))
{
- if ((i.prefix[REX_PREFIX] & prefix & REX_W)
- || ((i.prefix[REX_PREFIX] & (REX_R | REX_X | REX_B))
- && (prefix & (REX_R | REX_X | REX_B))))
- ret = 0;
- q = REX_PREFIX;
+ /* This instruction is available on all archs. */
+ match |= CPU_FLAGS_32BIT_MATCH;
}
else
{
- switch (prefix)
- {
- default:
- abort ();
-
- case CS_PREFIX_OPCODE:
- case DS_PREFIX_OPCODE:
- case ES_PREFIX_OPCODE:
- case FS_PREFIX_OPCODE:
- case GS_PREFIX_OPCODE:
- case SS_PREFIX_OPCODE:
- q = SEG_PREFIX;
- break;
-
- case REPNE_PREFIX_OPCODE:
- case REPE_PREFIX_OPCODE:
- ret = 2;
- /* fall thru */
- case LOCK_PREFIX_OPCODE:
- q = LOCKREP_PREFIX;
- break;
+ /* This instruction is available only on some archs. */
+ i386_cpu_flags cpu = cpu_arch_flags;
- case FWAIT_OPCODE:
- q = WAIT_PREFIX;
- break;
-
- case ADDR_PREFIX_OPCODE:
- q = ADDR_PREFIX;
- break;
-
- case DATA_PREFIX_OPCODE:
- q = DATA_PREFIX;
- break;
+ cpu.bitfield.cpu64 = 0;
+ cpu.bitfield.cpuno64 = 0;
+ cpu = cpu_flags_and (x, cpu);
+ if (!cpu_flags_all_zero (&cpu))
+ {
+ if (x.bitfield.cpuavx)
+ {
+ /* We only need to check AES/PCLMUL/SSE2AVX with AVX. */
+ if (cpu.bitfield.cpuavx)
+ {
+ /* Check SSE2AVX. */
+ if (!t->opcode_modifier.sse2avx|| sse2avx)
+ {
+ match |= (CPU_FLAGS_ARCH_MATCH
+ | CPU_FLAGS_AVX_MATCH);
+ /* Check AES. */
+ if (!x.bitfield.cpuaes || cpu.bitfield.cpuaes)
+ match |= CPU_FLAGS_AES_MATCH;
+ /* Check PCLMUL. */
+ if (!x.bitfield.cpupclmul
+ || cpu.bitfield.cpupclmul)
+ match |= CPU_FLAGS_PCLMUL_MATCH;
+ }
+ }
+ else
+ match |= CPU_FLAGS_ARCH_MATCH;
+ }
+ else
+ match |= CPU_FLAGS_32BIT_MATCH;
}
- if (i.prefix[q] != 0)
- ret = 0;
}
+ return match;
+}
- if (ret)
+static INLINE i386_operand_type
+operand_type_and (i386_operand_type x, i386_operand_type y)
+{
+ switch (ARRAY_SIZE (x.array))
{
- if (!i.prefix[q])
- ++i.prefixes;
- i.prefix[q] |= prefix;
- }
- else
- as_bad (_("same type of prefix used twice"));
-
- return ret;
+ case 3:
+ x.array [2] &= y.array [2];
+ case 2:
+ x.array [1] &= y.array [1];
+ case 1:
+ x.array [0] &= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
}
-static void
-set_code_flag (int value)
+static INLINE i386_operand_type
+operand_type_or (i386_operand_type x, i386_operand_type y)
{
- flag_code = value;
- cpu_arch_flags &= ~(Cpu64 | CpuNo64);
- cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
- if (value == CODE_64BIT && !(cpu_arch_flags & CpuSledgehammer))
- {
- as_bad (_("64bit mode not supported on this CPU."));
- }
- if (value == CODE_32BIT && !(cpu_arch_flags & Cpu386))
+ switch (ARRAY_SIZE (x.array))
{
- as_bad (_("32bit mode not supported on this CPU."));
+ case 3:
+ x.array [2] |= y.array [2];
+ case 2:
+ x.array [1] |= y.array [1];
+ case 1:
+ x.array [0] |= y.array [0];
+ break;
+ default:
+ abort ();
}
- stackop_size = '\0';
+ return x;
}
-static void
-set_16bit_gcc_code_flag (int new_code_flag)
+static INLINE i386_operand_type
+operand_type_xor (i386_operand_type x, i386_operand_type y)
{
- flag_code = new_code_flag;
- cpu_arch_flags &= ~(Cpu64 | CpuNo64);
- cpu_arch_flags |= (flag_code == CODE_64BIT ? Cpu64 : CpuNo64);
- stackop_size = LONG_MNEM_SUFFIX;
+ switch (ARRAY_SIZE (x.array))
+ {
+ case 3:
+ x.array [2] ^= y.array [2];
+ case 2:
+ x.array [1] ^= y.array [1];
+ case 1:
+ x.array [0] ^= y.array [0];
+ break;
+ default:
+ abort ();
+ }
+ return x;
}
-static void
-set_intel_syntax (int syntax_flag)
+static const i386_operand_type acc32 = OPERAND_TYPE_ACC32;
+static const i386_operand_type acc64 = OPERAND_TYPE_ACC64;
+static const i386_operand_type control = OPERAND_TYPE_CONTROL;
+static const i386_operand_type inoutportreg
+ = OPERAND_TYPE_INOUTPORTREG;
+static const i386_operand_type reg16_inoutportreg
+ = OPERAND_TYPE_REG16_INOUTPORTREG;
+static const i386_operand_type disp16 = OPERAND_TYPE_DISP16;
+static const i386_operand_type disp32 = OPERAND_TYPE_DISP32;
+static const i386_operand_type disp32s = OPERAND_TYPE_DISP32S;
+static const i386_operand_type disp16_32 = OPERAND_TYPE_DISP16_32;
+static const i386_operand_type anydisp
+ = OPERAND_TYPE_ANYDISP;
+static const i386_operand_type regxmm = OPERAND_TYPE_REGXMM;
+static const i386_operand_type regymm = OPERAND_TYPE_REGYMM;
+static const i386_operand_type imm8 = OPERAND_TYPE_IMM8;
+static const i386_operand_type imm8s = OPERAND_TYPE_IMM8S;
+static const i386_operand_type imm16 = OPERAND_TYPE_IMM16;
+static const i386_operand_type imm32 = OPERAND_TYPE_IMM32;
+static const i386_operand_type imm32s = OPERAND_TYPE_IMM32S;
+static const i386_operand_type imm64 = OPERAND_TYPE_IMM64;
+static const i386_operand_type imm16_32 = OPERAND_TYPE_IMM16_32;
+static const i386_operand_type imm16_32s = OPERAND_TYPE_IMM16_32S;
+static const i386_operand_type imm16_32_32s = OPERAND_TYPE_IMM16_32_32S;
+
+enum operand_type
{
- /* Find out if register prefixing is specified. */
- int ask_naked_reg = 0;
+ reg,
+ imm,
+ disp,
+ anymem
+};
- SKIP_WHITESPACE ();
- if (!is_end_of_line[(unsigned char) *input_line_pointer])
+static INLINE int
+operand_type_check (i386_operand_type t, enum operand_type c)
+{
+ switch (c)
{
- char *string = input_line_pointer;
- int e = get_symbol_end ();
+ case reg:
+ return (t.bitfield.reg8
+ || t.bitfield.reg16
+ || t.bitfield.reg32
+ || t.bitfield.reg64);
+
+ case imm:
+ return (t.bitfield.imm8
+ || t.bitfield.imm8s
+ || t.bitfield.imm16
+ || t.bitfield.imm32
+ || t.bitfield.imm32s
+ || t.bitfield.imm64);
+
+ case disp:
+ return (t.bitfield.disp8
+ || t.bitfield.disp16
+ || t.bitfield.disp32
+ || t.bitfield.disp32s
+ || t.bitfield.disp64);
+
+ case anymem:
+ return (t.bitfield.disp8
+ || t.bitfield.disp16
+ || t.bitfield.disp32
+ || t.bitfield.disp32s
+ || t.bitfield.disp64
+ || t.bitfield.baseindex);
- if (strcmp (string, "prefix") == 0)
- ask_naked_reg = 1;
- else if (strcmp (string, "noprefix") == 0)
- ask_naked_reg = -1;
- else
- as_bad (_("bad argument to syntax directive."));
- *input_line_pointer = e;
+ default:
+ abort ();
}
- demand_empty_rest_of_line ();
- intel_syntax = syntax_flag;
+ return 0;
+}
- if (ask_naked_reg == 0)
- allow_naked_reg = (intel_syntax
- && (bfd_get_symbol_leading_char (stdoutput) != '\0'));
- else
- allow_naked_reg = (ask_naked_reg < 0);
+/* Return 1 if there is no conflict in 8bit/16bit/32bit/64bit on
+ operand J for instruction template T. */
- identifier_chars['%'] = intel_syntax && allow_naked_reg ? '%' : 0;
- identifier_chars['$'] = intel_syntax ? '$' : 0;
- register_prefix = allow_naked_reg ? "" : "%";
+static INLINE int
+match_reg_size (const insn_template *t, unsigned int j)
+{
+ return !((i.types[j].bitfield.byte
+ && !t->operand_types[j].bitfield.byte)
+ || (i.types[j].bitfield.word
+ && !t->operand_types[j].bitfield.word)
+ || (i.types[j].bitfield.dword
+ && !t->operand_types[j].bitfield.dword)
+ || (i.types[j].bitfield.qword
+ && !t->operand_types[j].bitfield.qword));
}
-static void
-set_cpu_arch (int dummy ATTRIBUTE_UNUSED)
+/* Return 1 if there is no conflict in any size on operand J for
+ instruction template T. */
+
+static INLINE int
+match_mem_size (const insn_template *t, unsigned int j)
{
- SKIP_WHITESPACE ();
+ return (match_reg_size (t, j)
+ && !((i.types[j].bitfield.unspecified
+ && !t->operand_types[j].bitfield.unspecified)
+ || (i.types[j].bitfield.fword
+ && !t->operand_types[j].bitfield.fword)
+ || (i.types[j].bitfield.tbyte
+ && !t->operand_types[j].bitfield.tbyte)
+ || (i.types[j].bitfield.xmmword
+ && !t->operand_types[j].bitfield.xmmword)
+ || (i.types[j].bitfield.ymmword
+ && !t->operand_types[j].bitfield.ymmword)));
+}
- if (!is_end_of_line[(unsigned char) *input_line_pointer])
+/* Return 1 if there is no size conflict on any operands for
+ instruction template T. */
+
+static INLINE int
+operand_size_match (const insn_template *t)
+{
+ unsigned int j;
+ int match = 1;
+
+ /* Don't check jump instructions. */
+ if (t->opcode_modifier.jump
+ || t->opcode_modifier.jumpbyte
+ || t->opcode_modifier.jumpdword
+ || t->opcode_modifier.jumpintersegment)
+ return match;
+
+ /* Check memory and accumulator operand size. */
+ for (j = 0; j < i.operands; j++)
{
- char *string = input_line_pointer;
- int e = get_symbol_end ();
- unsigned int i;
+ if (t->operand_types[j].bitfield.anysize)
+ continue;
- for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
+ if (t->operand_types[j].bitfield.acc && !match_reg_size (t, j))
{
- if (strcmp (string, cpu_arch[i].name) == 0)
- {
- if (*string != '.')
- {
- cpu_arch_name = cpu_arch[i].name;
- cpu_sub_arch_name = NULL;
- cpu_arch_flags = (cpu_arch[i].flags
- | (flag_code == CODE_64BIT
- ? Cpu64 : CpuNo64));
- cpu_arch_isa = cpu_arch[i].type;
- cpu_arch_isa_flags = cpu_arch[i].flags;
- if (!cpu_arch_tune_set)
- {
- cpu_arch_tune = cpu_arch_isa;
- cpu_arch_tune_flags = cpu_arch_isa_flags;
- }
- break;
- }
- if ((cpu_arch_flags | cpu_arch[i].flags) != cpu_arch_flags)
- {
- cpu_sub_arch_name = cpu_arch[i].name;
- cpu_arch_flags |= cpu_arch[i].flags;
- }
- *input_line_pointer = e;
- demand_empty_rest_of_line ();
- return;
- }
+ match = 0;
+ break;
}
- if (i >= ARRAY_SIZE (cpu_arch))
- as_bad (_("no such architecture: `%s'"), string);
- *input_line_pointer = e;
+ if (i.types[j].bitfield.mem && !match_mem_size (t, j))
+ {
+ match = 0;
+ break;
+ }
}
- else
- as_bad (_("missing cpu architecture"));
- no_cond_jump_promotion = 0;
- if (*input_line_pointer == ','
- && !is_end_of_line[(unsigned char) input_line_pointer[1]])
- {
- char *string = ++input_line_pointer;
- int e = get_symbol_end ();
+ if (match
+ || (!t->opcode_modifier.d && !t->opcode_modifier.floatd))
+ return match;
- if (strcmp (string, "nojumps") == 0)
- no_cond_jump_promotion = 1;
- else if (strcmp (string, "jumps") == 0)
- ;
- else
- as_bad (_("no such architecture modifier: `%s'"), string);
+ /* Check reverse. */
+ gas_assert (i.operands == 2);
- *input_line_pointer = e;
+ match = 1;
+ for (j = 0; j < 2; j++)
+ {
+ if (t->operand_types[j].bitfield.acc
+ && !match_reg_size (t, j ? 0 : 1))
+ {
+ match = 0;
+ break;
+ }
+
+ if (i.types[j].bitfield.mem
+ && !match_mem_size (t, j ? 0 : 1))
+ {
+ match = 0;
+ break;
+ }
}
- demand_empty_rest_of_line ();
+ return match;
}
-unsigned long
-i386_mach ()
+static INLINE int
+operand_type_match (i386_operand_type overlap,
+ i386_operand_type given)
{
- if (!strcmp (default_arch, "x86_64"))
- return bfd_mach_x86_64;
- else if (!strcmp (default_arch, "i386"))
- return bfd_mach_i386_i386;
- else
- as_fatal (_("Unknown architecture"));
+ i386_operand_type temp = overlap;
+
+ temp.bitfield.jumpabsolute = 0;
+ temp.bitfield.unspecified = 0;
+ temp.bitfield.byte = 0;
+ temp.bitfield.word = 0;
+ temp.bitfield.dword = 0;
+ temp.bitfield.fword = 0;
+ temp.bitfield.qword = 0;
+ temp.bitfield.tbyte = 0;
+ temp.bitfield.xmmword = 0;
+ temp.bitfield.ymmword = 0;
+ if (operand_type_all_zero (&temp))
+ return 0;
+
+ return (given.bitfield.baseindex == overlap.bitfield.baseindex
+ && given.bitfield.jumpabsolute == overlap.bitfield.jumpabsolute);
}
-\f
-void
-md_begin ()
-{
- const char *hash_err;
- /* Initialize op_hash hash table. */
- op_hash = hash_new ();
+/* If given types g0 and g1 are registers they must be of the same type
+ unless the expected operand type register overlap is null.
+ Note that Acc in a template matches every size of reg. */
- {
- const template *optab;
- templates *core_optab;
+static INLINE int
+operand_type_register_match (i386_operand_type m0,
+ i386_operand_type g0,
+ i386_operand_type t0,
+ i386_operand_type m1,
+ i386_operand_type g1,
+ i386_operand_type t1)
+{
+ if (!operand_type_check (g0, reg))
+ return 1;
- /* Setup for loop. */
- optab = i386_optab;
- core_optab = (templates *) xmalloc (sizeof (templates));
- core_optab->start = optab;
+ if (!operand_type_check (g1, reg))
+ return 1;
- while (1)
- {
- ++optab;
- if (optab->name == NULL
- || strcmp (optab->name, (optab - 1)->name) != 0)
- {
- /* different name --> ship out current template list;
- add to hash table; & begin anew. */
- core_optab->end = optab;
- hash_err = hash_insert (op_hash,
- (optab - 1)->name,
- (PTR) core_optab);
- if (hash_err)
- {
- as_fatal (_("Internal Error: Can't hash %s: %s"),
- (optab - 1)->name,
- hash_err);
- }
- if (optab->name == NULL)
- break;
- core_optab = (templates *) xmalloc (sizeof (templates));
- core_optab->start = optab;
- }
- }
- }
+ if (g0.bitfield.reg8 == g1.bitfield.reg8
+ && g0.bitfield.reg16 == g1.bitfield.reg16
+ && g0.bitfield.reg32 == g1.bitfield.reg32
+ && g0.bitfield.reg64 == g1.bitfield.reg64)
+ return 1;
- /* Initialize reg_hash hash table. */
- reg_hash = hash_new ();
- {
- const reg_entry *regtab;
- unsigned int regtab_size = i386_regtab_size;
+ if (m0.bitfield.acc)
+ {
+ t0.bitfield.reg8 = 1;
+ t0.bitfield.reg16 = 1;
+ t0.bitfield.reg32 = 1;
+ t0.bitfield.reg64 = 1;
+ }
- for (regtab = i386_regtab; regtab_size--; regtab++)
- {
- hash_err = hash_insert (reg_hash, regtab->reg_name, (PTR) regtab);
- if (hash_err)
- as_fatal (_("Internal Error: Can't hash %s: %s"),
- regtab->reg_name,
- hash_err);
- }
- }
+ if (m1.bitfield.acc)
+ {
+ t1.bitfield.reg8 = 1;
+ t1.bitfield.reg16 = 1;
+ t1.bitfield.reg32 = 1;
+ t1.bitfield.reg64 = 1;
+ }
- /* Fill in lexical tables: mnemonic_chars, operand_chars. */
- {
- int c;
- char *p;
+ return (!(t0.bitfield.reg8 & t1.bitfield.reg8)
+ && !(t0.bitfield.reg16 & t1.bitfield.reg16)
+ && !(t0.bitfield.reg32 & t1.bitfield.reg32)
+ && !(t0.bitfield.reg64 & t1.bitfield.reg64));
+}
- for (c = 0; c < 256; c++)
- {
- if (ISDIGIT (c))
- {
- digit_chars[c] = c;
- mnemonic_chars[c] = c;
- register_chars[c] = c;
- operand_chars[c] = c;
- }
- else if (ISLOWER (c))
- {
- mnemonic_chars[c] = c;
- register_chars[c] = c;
- operand_chars[c] = c;
- }
- else if (ISUPPER (c))
- {
- mnemonic_chars[c] = TOLOWER (c);
- register_chars[c] = mnemonic_chars[c];
- operand_chars[c] = c;
- }
+static INLINE unsigned int
+mode_from_disp_size (i386_operand_type t)
+{
+ if (t.bitfield.disp8)
+ return 1;
+ else if (t.bitfield.disp16
+ || t.bitfield.disp32
+ || t.bitfield.disp32s)
+ return 2;
+ else
+ return 0;
+}
- if (ISALPHA (c) || ISDIGIT (c))
- identifier_chars[c] = c;
- else if (c >= 128)
- {
- identifier_chars[c] = c;
- operand_chars[c] = c;
- }
- }
+static INLINE int
+fits_in_signed_byte (offsetT num)
+{
+ return (num >= -128) && (num <= 127);
+}
-#ifdef LEX_AT
- identifier_chars['@'] = '@';
-#endif
-#ifdef LEX_QM
- identifier_chars['?'] = '?';
- operand_chars['?'] = '?';
+static INLINE int
+fits_in_unsigned_byte (offsetT num)
+{
+ return (num & 0xff) == num;
+}
+
+static INLINE int
+fits_in_unsigned_word (offsetT num)
+{
+ return (num & 0xffff) == num;
+}
+
+static INLINE int
+fits_in_signed_word (offsetT num)
+{
+ return (-32768 <= num) && (num <= 32767);
+}
+
+static INLINE int
+fits_in_signed_long (offsetT num ATTRIBUTE_UNUSED)
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (!(((offsetT) -1 << 31) & num)
+ || (((offsetT) -1 << 31) & num) == ((offsetT) -1 << 31));
#endif
- digit_chars['-'] = '-';
- mnemonic_chars['-'] = '-';
- mnemonic_chars['.'] = '.';
- identifier_chars['_'] = '_';
- identifier_chars['.'] = '.';
+} /* fits_in_signed_long() */
- for (p = operand_special_chars; *p != '\0'; p++)
- operand_chars[(unsigned char) *p] = *p;
- }
+static INLINE int
+fits_in_unsigned_long (offsetT num ATTRIBUTE_UNUSED)
+{
+#ifndef BFD64
+ return 1;
+#else
+ return (num & (((offsetT) 2 << 31) - 1)) == num;
+#endif
+} /* fits_in_unsigned_long() */
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- if (IS_ELF)
+static i386_operand_type
+smallest_imm_type (offsetT num)
+{
+ i386_operand_type t;
+
+ operand_type_set (&t, 0);
+ t.bitfield.imm64 = 1;
+
+ if (cpu_arch_tune != PROCESSOR_I486 && num == 1)
{
- record_alignment (text_section, 2);
- record_alignment (data_section, 2);
- record_alignment (bss_section, 2);
+ /* This code is disabled on the 486 because all the Imm1 forms
+ in the opcode table are slower on the i486. They're the
+ versions with the implicitly specified single-position
+ displacement, which has another syntax if you really want to
+ use that form. */
+ t.bitfield.imm1 = 1;
+ t.bitfield.imm8 = 1;
+ t.bitfield.imm8s = 1;
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
}
-#endif
-
- if (flag_code == CODE_64BIT)
+ else if (fits_in_signed_byte (num))
{
- x86_dwarf2_return_column = 16;
- x86_cie_data_alignment = -8;
+ t.bitfield.imm8 = 1;
+ t.bitfield.imm8s = 1;
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
}
- else
+ else if (fits_in_unsigned_byte (num))
{
- x86_dwarf2_return_column = 8;
- x86_cie_data_alignment = -4;
+ t.bitfield.imm8 = 1;
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_signed_word (num) || fits_in_unsigned_word (num))
+ {
+ t.bitfield.imm16 = 1;
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
+ }
+ else if (fits_in_signed_long (num))
+ {
+ t.bitfield.imm32 = 1;
+ t.bitfield.imm32s = 1;
}
+ else if (fits_in_unsigned_long (num))
+ t.bitfield.imm32 = 1;
+
+ return t;
}
-void
-i386_print_statistics (FILE *file)
+static offsetT
+offset_in_range (offsetT val, int size)
{
- hash_print_statistics (file, "i386 opcode", op_hash);
- hash_print_statistics (file, "i386 register", reg_hash);
-}
-\f
-#ifdef DEBUG386
+ addressT mask;
-/* Debugging routines for md_assemble. */
-static void pte (template *);
-static void pt (unsigned int);
-static void pe (expressionS *);
-static void ps (symbolS *);
+ switch (size)
+ {
+ case 1: mask = ((addressT) 1 << 8) - 1; break;
+ case 2: mask = ((addressT) 1 << 16) - 1; break;
+ case 4: mask = ((addressT) 2 << 31) - 1; break;
+#ifdef BFD64
+ case 8: mask = ((addressT) 2 << 63) - 1; break;
+#endif
+ default: abort ();
+ }
-static void
-pi (char *line, i386_insn *x)
-{
- unsigned int i;
+ /* If BFD64, sign extend val. */
+ if (!use_rela_relocations)
+ if ((val & ~(((addressT) 2 << 31) - 1)) == 0)
+ val = (val ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
- fprintf (stdout, "%s: template ", line);
- pte (&x->tm);
- fprintf (stdout, " address: base %s index %s scale %x\n",
- x->base_reg ? x->base_reg->reg_name : "none",
- x->index_reg ? x->index_reg->reg_name : "none",
- x->log2_scale_factor);
- fprintf (stdout, " modrm: mode %x reg %x reg/mem %x\n",
- x->rm.mode, x->rm.reg, x->rm.regmem);
- fprintf (stdout, " sib: base %x index %x scale %x\n",
- x->sib.base, x->sib.index, x->sib.scale);
- fprintf (stdout, " rex: 64bit %x extX %x extY %x extZ %x\n",
- (x->rex & REX_W) != 0,
- (x->rex & REX_R) != 0,
- (x->rex & REX_X) != 0,
- (x->rex & REX_B) != 0);
- for (i = 0; i < x->operands; i++)
+ if ((val & ~mask) != 0 && (val & ~mask) != ~mask)
{
- fprintf (stdout, " #%d: ", i + 1);
- pt (x->types[i]);
- fprintf (stdout, "\n");
- if (x->types[i]
- & (Reg | SReg2 | SReg3 | Control | Debug | Test | RegMMX | RegXMM))
- fprintf (stdout, "%s\n", x->op[i].regs->reg_name);
- if (x->types[i] & Imm)
- pe (x->op[i].imms);
- if (x->types[i] & Disp)
- pe (x->op[i].disps);
+ char buf1[40], buf2[40];
+
+ sprint_value (buf1, val);
+ sprint_value (buf2, val & mask);
+ as_warn (_("%s shortened to %s"), buf1, buf2);
}
+ return val & mask;
}
-static void
-pte (template *t)
+/* Returns 0 if attempting to add a prefix where one from the same
+ class already exists, 1 if non rep/repne added, 2 if rep/repne
+ added. */
+static int
+add_prefix (unsigned int prefix)
{
- unsigned int i;
- fprintf (stdout, " %d operands ", t->operands);
- fprintf (stdout, "opcode %x ", t->base_opcode);
- if (t->extension_opcode != None)
- fprintf (stdout, "ext %x ", t->extension_opcode);
- if (t->opcode_modifier & D)
- fprintf (stdout, "D");
- if (t->opcode_modifier & W)
- fprintf (stdout, "W");
- fprintf (stdout, "\n");
- for (i = 0; i < t->operands; i++)
+ int ret = 1;
+ unsigned int q;
+
+ if (prefix >= REX_OPCODE && prefix < REX_OPCODE + 16
+ && flag_code == CODE_64BIT)
{
- fprintf (stdout, " #%d type ", i + 1);
- pt (t->operand_types[i]);
- fprintf (stdout, "\n");
+ if ((i.prefix[REX_PREFIX] & prefix & REX_W)
+ || ((i.prefix[REX_PREFIX] & (REX_R | REX_X | REX_B))
+ && (prefix & (REX_R | REX_X | REX_B))))
+ ret = 0;
+ q = REX_PREFIX;
+ }
+ else
+ {
+ switch (prefix)
+ {
+ default:
+ abort ();
+
+ case CS_PREFIX_OPCODE:
+ case DS_PREFIX_OPCODE:
+ case ES_PREFIX_OPCODE:
+ case FS_PREFIX_OPCODE:
+ case GS_PREFIX_OPCODE:
+ case SS_PREFIX_OPCODE:
+ q = SEG_PREFIX;
+ break;
+
+ case REPNE_PREFIX_OPCODE:
+ case REPE_PREFIX_OPCODE:
+ ret = 2;
+ /* fall thru */
+ case LOCK_PREFIX_OPCODE:
+ q = LOCKREP_PREFIX;
+ break;
+
+ case FWAIT_OPCODE:
+ q = WAIT_PREFIX;
+ break;
+
+ case ADDR_PREFIX_OPCODE:
+ q = ADDR_PREFIX;
+ break;
+
+ case DATA_PREFIX_OPCODE:
+ q = DATA_PREFIX;
+ break;
+ }
+ if (i.prefix[q] != 0)
+ ret = 0;
+ }
+
+ if (ret)
+ {
+ if (!i.prefix[q])
+ ++i.prefixes;
+ i.prefix[q] |= prefix;
}
+ else
+ as_bad (_("same type of prefix used twice"));
+
+ return ret;
}
static void
-pe (expressionS *e)
+set_code_flag (int value)
{
- fprintf (stdout, " operation %d\n", e->X_op);
- fprintf (stdout, " add_number %ld (%lx)\n",
- (long) e->X_add_number, (long) e->X_add_number);
- if (e->X_add_symbol)
+ flag_code = (enum flag_code) value;
+ if (flag_code == CODE_64BIT)
{
- fprintf (stdout, " add_symbol ");
- ps (e->X_add_symbol);
- fprintf (stdout, "\n");
+ cpu_arch_flags.bitfield.cpu64 = 1;
+ cpu_arch_flags.bitfield.cpuno64 = 0;
}
- if (e->X_op_symbol)
+ else
{
- fprintf (stdout, " op_symbol ");
- ps (e->X_op_symbol);
- fprintf (stdout, "\n");
+ cpu_arch_flags.bitfield.cpu64 = 0;
+ cpu_arch_flags.bitfield.cpuno64 = 1;
+ }
+ if (value == CODE_64BIT && !cpu_arch_flags.bitfield.cpulm )
+ {
+ as_bad (_("64bit mode not supported on this CPU."));
}
+ if (value == CODE_32BIT && !cpu_arch_flags.bitfield.cpui386)
+ {
+ as_bad (_("32bit mode not supported on this CPU."));
+ }
+ stackop_size = '\0';
}
static void
-ps (symbolS *s)
+set_16bit_gcc_code_flag (int new_code_flag)
{
- fprintf (stdout, "%s type %s%s",
- S_GET_NAME (s),
- S_IS_EXTERNAL (s) ? "EXTERNAL " : "",
- segment_name (S_GET_SEGMENT (s)));
+ flag_code = (enum flag_code) new_code_flag;
+ if (flag_code != CODE_16BIT)
+ abort ();
+ cpu_arch_flags.bitfield.cpu64 = 0;
+ cpu_arch_flags.bitfield.cpuno64 = 1;
+ stackop_size = LONG_MNEM_SUFFIX;
}
-static struct type_name
- {
- unsigned int mask;
- char *tname;
- }
-const type_names[] =
-{
- { Reg8, "r8" },
- { Reg16, "r16" },
- { Reg32, "r32" },
- { Reg64, "r64" },
- { Imm8, "i8" },
- { Imm8S, "i8s" },
- { Imm16, "i16" },
- { Imm32, "i32" },
- { Imm32S, "i32s" },
- { Imm64, "i64" },
- { Imm1, "i1" },
- { BaseIndex, "BaseIndex" },
- { Disp8, "d8" },
- { Disp16, "d16" },
- { Disp32, "d32" },
- { Disp32S, "d32s" },
- { Disp64, "d64" },
- { InOutPortReg, "InOutPortReg" },
- { ShiftCount, "ShiftCount" },
- { Control, "control reg" },
- { Test, "test reg" },
- { Debug, "debug reg" },
- { FloatReg, "FReg" },
- { FloatAcc, "FAcc" },
- { SReg2, "SReg2" },
- { SReg3, "SReg3" },
- { Acc, "Acc" },
- { JumpAbsolute, "Jump Absolute" },
- { RegMMX, "rMMX" },
- { RegXMM, "rXMM" },
- { EsSeg, "es" },
- { 0, "" }
-};
-
static void
-pt (t)
- unsigned int t;
+set_intel_syntax (int syntax_flag)
{
- const struct type_name *ty;
+ /* Find out if register prefixing is specified. */
+ int ask_naked_reg = 0;
- for (ty = type_names; ty->mask; ty++)
- if (t & ty->mask)
- fprintf (stdout, "%s, ", ty->tname);
- fflush (stdout);
-}
+ SKIP_WHITESPACE ();
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
+ {
+ char *string = input_line_pointer;
+ int e = get_symbol_end ();
-#endif /* DEBUG386 */
-\f
-static bfd_reloc_code_real_type
-reloc (unsigned int size,
- int pcrel,
- int sign,
- bfd_reloc_code_real_type other)
-{
- if (other != NO_RELOC)
- {
- reloc_howto_type *reloc;
-
- if (size == 8)
- switch (other)
- {
- case BFD_RELOC_X86_64_GOT32:
- return BFD_RELOC_X86_64_GOT64;
- break;
- case BFD_RELOC_X86_64_PLTOFF64:
- return BFD_RELOC_X86_64_PLTOFF64;
- break;
- case BFD_RELOC_X86_64_GOTPC32:
- other = BFD_RELOC_X86_64_GOTPC64;
- break;
- case BFD_RELOC_X86_64_GOTPCREL:
- other = BFD_RELOC_X86_64_GOTPCREL64;
- break;
- case BFD_RELOC_X86_64_TPOFF32:
- other = BFD_RELOC_X86_64_TPOFF64;
- break;
- case BFD_RELOC_X86_64_DTPOFF32:
- other = BFD_RELOC_X86_64_DTPOFF64;
- break;
- default:
- break;
- }
-
- /* Sign-checking 4-byte relocations in 16-/32-bit code is pointless. */
- if (size == 4 && flag_code != CODE_64BIT)
- sign = -1;
-
- reloc = bfd_reloc_type_lookup (stdoutput, other);
- if (!reloc)
- as_bad (_("unknown relocation (%u)"), other);
- else if (size != bfd_get_reloc_size (reloc))
- as_bad (_("%u-byte relocation cannot be applied to %u-byte field"),
- bfd_get_reloc_size (reloc),
- size);
- else if (pcrel && !reloc->pc_relative)
- as_bad (_("non-pc-relative relocation for pc-relative field"));
- else if ((reloc->complain_on_overflow == complain_overflow_signed
- && !sign)
- || (reloc->complain_on_overflow == complain_overflow_unsigned
- && sign > 0))
- as_bad (_("relocated field and relocation type differ in signedness"));
+ if (strcmp (string, "prefix") == 0)
+ ask_naked_reg = 1;
+ else if (strcmp (string, "noprefix") == 0)
+ ask_naked_reg = -1;
else
- return other;
- return NO_RELOC;
+ as_bad (_("bad argument to syntax directive."));
+ *input_line_pointer = e;
}
+ demand_empty_rest_of_line ();
- if (pcrel)
- {
- if (!sign)
- as_bad (_("there are no unsigned pc-relative relocations"));
- switch (size)
- {
- case 1: return BFD_RELOC_8_PCREL;
- case 2: return BFD_RELOC_16_PCREL;
- case 4: return BFD_RELOC_32_PCREL;
- case 8: return BFD_RELOC_64_PCREL;
- }
- as_bad (_("cannot do %u byte pc-relative relocation"), size);
- }
+ intel_syntax = syntax_flag;
+
+ if (ask_naked_reg == 0)
+ allow_naked_reg = (intel_syntax
+ && (bfd_get_symbol_leading_char (stdoutput) != '\0'));
else
- {
- if (sign > 0)
- switch (size)
- {
- case 4: return BFD_RELOC_X86_64_32S;
- }
- else
- switch (size)
- {
- case 1: return BFD_RELOC_8;
- case 2: return BFD_RELOC_16;
- case 4: return BFD_RELOC_32;
- case 8: return BFD_RELOC_64;
- }
- as_bad (_("cannot do %s %u byte relocation"),
- sign > 0 ? "signed" : "unsigned", size);
- }
+ allow_naked_reg = (ask_naked_reg < 0);
- abort ();
- return BFD_RELOC_NONE;
-}
+ expr_set_rank (O_full_ptr, syntax_flag ? 10 : 0);
-/* Here we decide which fixups can be adjusted to make them relative to
- the beginning of the section instead of the symbol. Basically we need
- to make sure that the dynamic relocations are done correctly, so in
- some cases we force the original symbol to be used. */
+ identifier_chars['%'] = intel_syntax && allow_naked_reg ? '%' : 0;
+ identifier_chars['$'] = intel_syntax ? '$' : 0;
+ register_prefix = allow_naked_reg ? "" : "%";
+}
-int
-tc_i386_fix_adjustable (fixS *fixP ATTRIBUTE_UNUSED)
+static void
+set_intel_mnemonic (int mnemonic_flag)
{
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- if (!IS_ELF)
- return 1;
-
- /* Don't adjust pc-relative references to merge sections in 64-bit
- mode. */
- if (use_rela_relocations
- && (S_GET_SEGMENT (fixP->fx_addsy)->flags & SEC_MERGE) != 0
- && fixP->fx_pcrel)
- return 0;
-
- /* The x86_64 GOTPCREL are represented as 32bit PCrel relocations
- and changed later by validate_fix. */
- if (GOT_symbol && fixP->fx_subsy == GOT_symbol
- && fixP->fx_r_type == BFD_RELOC_32_PCREL)
- return 0;
-
- /* adjust_reloc_syms doesn't know about the GOT. */
- if (fixP->fx_r_type == BFD_RELOC_386_GOTOFF
- || fixP->fx_r_type == BFD_RELOC_386_PLT32
- || fixP->fx_r_type == BFD_RELOC_386_GOT32
- || fixP->fx_r_type == BFD_RELOC_386_TLS_GD
- || fixP->fx_r_type == BFD_RELOC_386_TLS_LDM
- || fixP->fx_r_type == BFD_RELOC_386_TLS_LDO_32
- || fixP->fx_r_type == BFD_RELOC_386_TLS_IE_32
- || fixP->fx_r_type == BFD_RELOC_386_TLS_IE
- || fixP->fx_r_type == BFD_RELOC_386_TLS_GOTIE
- || fixP->fx_r_type == BFD_RELOC_386_TLS_LE_32
- || fixP->fx_r_type == BFD_RELOC_386_TLS_LE
- || fixP->fx_r_type == BFD_RELOC_386_TLS_GOTDESC
- || fixP->fx_r_type == BFD_RELOC_386_TLS_DESC_CALL
- || fixP->fx_r_type == BFD_RELOC_X86_64_PLT32
- || fixP->fx_r_type == BFD_RELOC_X86_64_GOT32
- || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPCREL
- || fixP->fx_r_type == BFD_RELOC_X86_64_TLSGD
- || fixP->fx_r_type == BFD_RELOC_X86_64_TLSLD
- || fixP->fx_r_type == BFD_RELOC_X86_64_DTPOFF32
- || fixP->fx_r_type == BFD_RELOC_X86_64_DTPOFF64
- || fixP->fx_r_type == BFD_RELOC_X86_64_GOTTPOFF
- || fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF32
- || fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF64
- || fixP->fx_r_type == BFD_RELOC_X86_64_GOTOFF64
- || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPC32_TLSDESC
- || fixP->fx_r_type == BFD_RELOC_X86_64_TLSDESC_CALL
- || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
- || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- return 0;
-#endif
- return 1;
+ intel_mnemonic = mnemonic_flag;
}
-static int
-intel_float_operand (const char *mnemonic)
+static void
+set_allow_index_reg (int flag)
{
- /* Note that the value returned is meaningful only for opcodes with (memory)
- operands, hence the code here is free to improperly handle opcodes that
- have no operands (for better performance and smaller code). */
+ allow_index_reg = flag;
+}
- if (mnemonic[0] != 'f')
- return 0; /* non-math */
+static void
+set_sse_check (int dummy ATTRIBUTE_UNUSED)
+{
+ SKIP_WHITESPACE ();
- switch (mnemonic[1])
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
- /* fclex, fdecstp, fdisi, femms, feni, fincstp, finit, fsetpm, and
- the fs segment override prefix not currently handled because no
- call path can make opcodes without operands get here */
- case 'i':
- return 2 /* integer op */;
- case 'l':
- if (mnemonic[2] == 'd' && (mnemonic[3] == 'c' || mnemonic[3] == 'e'))
- return 3; /* fldcw/fldenv */
- break;
- case 'n':
- if (mnemonic[2] != 'o' /* fnop */)
- return 3; /* non-waiting control op */
- break;
- case 'r':
- if (mnemonic[2] == 's')
- return 3; /* frstor/frstpm */
- break;
- case 's':
- if (mnemonic[2] == 'a')
- return 3; /* fsave */
- if (mnemonic[2] == 't')
- {
- switch (mnemonic[3])
- {
- case 'c': /* fstcw */
- case 'd': /* fstdw */
- case 'e': /* fstenv */
- case 's': /* fsts[gw] */
- return 3;
- }
- }
- break;
- case 'x':
- if (mnemonic[2] == 'r' || mnemonic[2] == 's')
- return 0; /* fxsave/fxrstor are not really math ops */
- break;
+ char *string = input_line_pointer;
+ int e = get_symbol_end ();
+
+ if (strcmp (string, "none") == 0)
+ sse_check = sse_check_none;
+ else if (strcmp (string, "warning") == 0)
+ sse_check = sse_check_warning;
+ else if (strcmp (string, "error") == 0)
+ sse_check = sse_check_error;
+ else
+ as_bad (_("bad argument to sse_check directive."));
+ *input_line_pointer = e;
}
+ else
+ as_bad (_("missing argument for sse_check directive"));
- return 1;
+ demand_empty_rest_of_line ();
}
-/* This is the guts of the machine-dependent assembler. LINE points to a
- machine dependent instruction. This function is supposed to emit
- the frags/bytes it assembles to. */
-
-void
-md_assemble (line)
- char *line;
+static void
+check_cpu_arch_compatible (const char *name ATTRIBUTE_UNUSED,
+ i386_cpu_flags new_flag ATTRIBUTE_UNUSED)
{
- int j;
- char mnemonic[MAX_MNEM_SIZE];
-
- /* Initialize globals. */
- memset (&i, '\0', sizeof (i));
- for (j = 0; j < MAX_OPERANDS; j++)
- i.reloc[j] = NO_RELOC;
- memset (disp_expressions, '\0', sizeof (disp_expressions));
- memset (im_expressions, '\0', sizeof (im_expressions));
- save_stack_p = save_stack;
-
- /* First parse an instruction mnemonic & call i386_operand for the operands.
- We assume that the scrubber has arranged it so that line[0] is the valid
- start of a (possibly prefixed) mnemonic. */
-
- line = parse_insn (line, mnemonic);
- if (line == NULL)
- return;
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ static const char *arch;
- line = parse_operands (line, mnemonic);
- if (line == NULL)
+ /* Intel LIOM is only supported on ELF. */
+ if (!IS_ELF)
return;
- /* The order of the immediates should be reversed
- for 2 immediates extrq and insertq instructions */
- if ((i.imm_operands == 2)
- && ((strcmp (mnemonic, "extrq") == 0)
- || (strcmp (mnemonic, "insertq") == 0)))
+ if (!arch)
{
- swap_2_operands (0, 1);
- /* "extrq" and insertq" are the only two instructions whose operands
- have to be reversed even though they have two immediate operands.
- */
- if (intel_syntax)
- swap_operands ();
+ /* Use cpu_arch_name if it is set in md_parse_option. Otherwise
+ use default_arch. */
+ arch = cpu_arch_name;
+ if (!arch)
+ arch = default_arch;
}
- /* Now we've parsed the mnemonic into a set of templates, and have the
- operands at hand. */
+ /* If we are targeting Intel L1OM, we must enable it. */
+ if (get_elf_backend_data (stdoutput)->elf_machine_code != EM_L1OM
+ || new_flag.bitfield.cpul1om)
+ return;
+
+ as_bad (_("`%s' is not supported on `%s'"), name, arch);
+#endif
+}
- /* All intel opcodes have reversed operands except for "bound" and
- "enter". We also don't reverse intersegment "jmp" and "call"
- instructions with 2 immediate operands so that the immediate segment
- precedes the offset, as it does when in AT&T mode. */
- if (intel_syntax
- && i.operands > 1
- && (strcmp (mnemonic, "bound") != 0)
- && (strcmp (mnemonic, "invlpga") != 0)
- && !((i.types[0] & Imm) && (i.types[1] & Imm)))
- swap_operands ();
-
- if (i.imm_operands)
- optimize_imm ();
-
- /* Don't optimize displacement for movabs since it only takes 64bit
- displacement. */
- if (i.disp_operands
- && (flag_code != CODE_64BIT
- || strcmp (mnemonic, "movabs") != 0))
- optimize_disp ();
-
- /* Next, we find a template that matches the given insn,
- making sure the overlap of the given operands types is consistent
- with the template operand types. */
-
- if (!match_template ())
- return;
+static void
+set_cpu_arch (int dummy ATTRIBUTE_UNUSED)
+{
+ SKIP_WHITESPACE ();
- if (intel_syntax)
+ if (!is_end_of_line[(unsigned char) *input_line_pointer])
{
- /* Undo SYSV386_COMPAT brokenness when in Intel mode. See i386.h */
- if (SYSV386_COMPAT
- && (i.tm.base_opcode & 0xfffffde0) == 0xdce0)
- i.tm.base_opcode ^= Opcode_FloatR;
+ char *string = input_line_pointer;
+ int e = get_symbol_end ();
+ unsigned int i;
+ i386_cpu_flags flags;
- /* Zap movzx and movsx suffix. The suffix may have been set from
- "word ptr" or "byte ptr" on the source operand, but we'll use
- the suffix later to choose the destination register. */
- if ((i.tm.base_opcode & ~9) == 0x0fb6)
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
{
- if (i.reg_operands < 2
- && !i.suffix
- && (~i.tm.opcode_modifier
- & (No_bSuf
- | No_wSuf
- | No_lSuf
- | No_sSuf
- | No_xSuf
- | No_qSuf)))
- as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
-
- i.suffix = 0;
- }
- }
-
- if (i.tm.opcode_modifier & FWait)
- if (!add_prefix (FWAIT_OPCODE))
- return;
-
- /* Check string instruction segment overrides. */
- if ((i.tm.opcode_modifier & IsString) != 0 && i.mem_operands != 0)
- {
- if (!check_string ())
- return;
- }
+ if (strcmp (string, cpu_arch[i].name) == 0)
+ {
+ check_cpu_arch_compatible (string, cpu_arch[i].flags);
- if (!process_suffix ())
- return;
+ if (*string != '.')
+ {
+ cpu_arch_name = cpu_arch[i].name;
+ cpu_sub_arch_name = NULL;
+ cpu_arch_flags = cpu_arch[i].flags;
+ if (flag_code == CODE_64BIT)
+ {
+ cpu_arch_flags.bitfield.cpu64 = 1;
+ cpu_arch_flags.bitfield.cpuno64 = 0;
+ }
+ else
+ {
+ cpu_arch_flags.bitfield.cpu64 = 0;
+ cpu_arch_flags.bitfield.cpuno64 = 1;
+ }
+ cpu_arch_isa = cpu_arch[i].type;
+ cpu_arch_isa_flags = cpu_arch[i].flags;
+ if (!cpu_arch_tune_set)
+ {
+ cpu_arch_tune = cpu_arch_isa;
+ cpu_arch_tune_flags = cpu_arch_isa_flags;
+ }
+ break;
+ }
- /* Make still unresolved immediate matches conform to size of immediate
- given in i.suffix. */
- if (!finalize_imm ())
- return;
+ if (strncmp (string + 1, "no", 2))
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ else
+ flags = cpu_flags_and_not (cpu_arch_flags,
+ cpu_arch[i].flags);
+ if (!cpu_flags_equal (&flags, &cpu_arch_flags))
+ {
+ if (cpu_sub_arch_name)
+ {
+ char *name = cpu_sub_arch_name;
+ cpu_sub_arch_name = concat (name,
+ cpu_arch[i].name,
+ (const char *) NULL);
+ free (name);
+ }
+ else
+ cpu_sub_arch_name = xstrdup (cpu_arch[i].name);
+ cpu_arch_flags = flags;
+ }
+ *input_line_pointer = e;
+ demand_empty_rest_of_line ();
+ return;
+ }
+ }
+ if (i >= ARRAY_SIZE (cpu_arch))
+ as_bad (_("no such architecture: `%s'"), string);
- if (i.types[0] & Imm1)
- i.imm_operands = 0; /* kludge for shift insns. */
- if (i.types[0] & ImplicitRegister)
- i.reg_operands--;
- if (i.types[1] & ImplicitRegister)
- i.reg_operands--;
- if (i.types[2] & ImplicitRegister)
- i.reg_operands--;
+ *input_line_pointer = e;
+ }
+ else
+ as_bad (_("missing cpu architecture"));
- if (i.tm.opcode_modifier & ImmExt)
+ no_cond_jump_promotion = 0;
+ if (*input_line_pointer == ','
+ && !is_end_of_line[(unsigned char) input_line_pointer[1]])
{
- expressionS *exp;
+ char *string = ++input_line_pointer;
+ int e = get_symbol_end ();
- if ((i.tm.cpu_flags & CpuSSE3) && i.operands > 0)
- {
- /* Streaming SIMD extensions 3 Instructions have the fixed
- operands with an opcode suffix which is coded in the same
- place as an 8-bit immediate field would be. Here we check
- those operands and remove them afterwards. */
- unsigned int x;
-
- for (x = 0; x < i.operands; x++)
- if (i.op[x].regs->reg_num != x)
- as_bad (_("can't use register '%s%s' as operand %d in '%s'."),
- register_prefix,
- i.op[x].regs->reg_name,
- x + 1,
- i.tm.name);
- i.operands = 0;
- }
-
- /* These AMD 3DNow! and Intel Katmai New Instructions have an
- opcode suffix which is coded in the same place as an 8-bit
- immediate field would be. Here we fake an 8-bit immediate
- operand from the opcode suffix stored in tm.extension_opcode. */
-
- assert (i.imm_operands == 0 && i.operands <= 2 && 2 < MAX_OPERANDS);
-
- exp = &im_expressions[i.imm_operands++];
- i.op[i.operands].imms = exp;
- i.types[i.operands++] = Imm8;
- exp->X_op = O_constant;
- exp->X_add_number = i.tm.extension_opcode;
- i.tm.extension_opcode = None;
- }
+ if (strcmp (string, "nojumps") == 0)
+ no_cond_jump_promotion = 1;
+ else if (strcmp (string, "jumps") == 0)
+ ;
+ else
+ as_bad (_("no such architecture modifier: `%s'"), string);
- /* For insns with operands there are more diddles to do to the opcode. */
- if (i.operands)
- {
- if (!process_operands ())
- return;
- }
- else if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
- {
- /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
- as_warn (_("translating to `%sp'"), i.tm.name);
+ *input_line_pointer = e;
}
- /* Handle conversion of 'int $3' --> special int3 insn. */
- if (i.tm.base_opcode == INT_OPCODE && i.op[0].imms->X_add_number == 3)
- {
- i.tm.base_opcode = INT3_OPCODE;
- i.imm_operands = 0;
- }
+ demand_empty_rest_of_line ();
+}
- if ((i.tm.opcode_modifier & (Jump | JumpByte | JumpDword))
- && i.op[0].disps->X_op == O_constant)
+enum bfd_architecture
+i386_arch (void)
+{
+ if (cpu_arch_isa == PROCESSOR_L1OM)
{
- /* Convert "jmp constant" (and "call constant") to a jump (call) to
- the absolute address given by the constant. Since ix86 jumps and
- calls are pc relative, we need to generate a reloc. */
- i.op[0].disps->X_add_symbol = &abs_symbol;
- i.op[0].disps->X_op = O_symbol;
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour
+ || flag_code != CODE_64BIT)
+ as_fatal (_("Intel L1OM is 64bit ELF only"));
+ return bfd_arch_l1om;
}
+ else
+ return bfd_arch_i386;
+}
- if ((i.tm.opcode_modifier & Rex64) != 0)
- i.rex |= REX_W;
-
- /* For 8 bit registers we need an empty rex prefix. Also if the
- instruction already has a prefix, we need to convert old
- registers to new ones. */
-
- if (((i.types[0] & Reg8) != 0
- && (i.op[0].regs->reg_flags & RegRex64) != 0)
- || ((i.types[1] & Reg8) != 0
- && (i.op[1].regs->reg_flags & RegRex64) != 0)
- || (((i.types[0] & Reg8) != 0 || (i.types[1] & Reg8) != 0)
- && i.rex != 0))
+unsigned long
+i386_mach ()
+{
+ if (!strcmp (default_arch, "x86_64"))
{
- int x;
-
- i.rex |= REX_OPCODE;
- for (x = 0; x < 2; x++)
+ if (cpu_arch_isa == PROCESSOR_L1OM)
{
- /* Look for 8 bit operand that uses old registers. */
- if ((i.types[x] & Reg8) != 0
- && (i.op[x].regs->reg_flags & RegRex64) == 0)
- {
- /* In case it is "hi" register, give up. */
- if (i.op[x].regs->reg_num > 3)
- as_bad (_("can't encode register '%s%s' in an "
- "instruction requiring REX prefix."),
- register_prefix, i.op[x].regs->reg_name);
-
- /* Otherwise it is equivalent to the extended register.
- Since the encoding doesn't change this is merely
- cosmetic cleanup for debug output. */
-
- i.op[x].regs = i.op[x].regs + 8;
- }
+ if (OUTPUT_FLAVOR != bfd_target_elf_flavour)
+ as_fatal (_("Intel L1OM is 64bit ELF only"));
+ return bfd_mach_l1om;
}
+ else
+ return bfd_mach_x86_64;
}
-
- if (i.rex != 0)
- add_prefix (REX_OPCODE | i.rex);
-
- /* We are ready to output the insn. */
- output_insn ();
+ else if (!strcmp (default_arch, "i386"))
+ return bfd_mach_i386_i386;
+ else
+ as_fatal (_("Unknown architecture"));
}
-
-static char *
-parse_insn (char *line, char *mnemonic)
+\f
+void
+md_begin ()
{
- char *l = line;
- char *token_start = l;
- char *mnem_p;
- int supported;
- const template *t;
+ const char *hash_err;
- /* Non-zero if we found a prefix only acceptable with string insns. */
- const char *expecting_string_instruction = NULL;
+ /* Initialize op_hash hash table. */
+ op_hash = hash_new ();
- while (1)
- {
- mnem_p = mnemonic;
- while ((*mnem_p = mnemonic_chars[(unsigned char) *l]) != 0)
- {
- mnem_p++;
- if (mnem_p >= mnemonic + MAX_MNEM_SIZE)
- {
- as_bad (_("no such instruction: `%s'"), token_start);
- return NULL;
- }
- l++;
- }
- if (!is_space_char (*l)
- && *l != END_OF_INSN
- && (intel_syntax
- || (*l != PREFIX_SEPARATOR
- && *l != ',')))
- {
- as_bad (_("invalid character %s in mnemonic"),
- output_invalid (*l));
- return NULL;
- }
- if (token_start == l)
- {
- if (!intel_syntax && *l == PREFIX_SEPARATOR)
- as_bad (_("expecting prefix; got nothing"));
- else
- as_bad (_("expecting mnemonic; got nothing"));
- return NULL;
- }
+ {
+ const insn_template *optab;
+ templates *core_optab;
- /* Look up instruction (or prefix) via hash table. */
- current_templates = hash_find (op_hash, mnemonic);
+ /* Setup for loop. */
+ optab = i386_optab;
+ core_optab = (templates *) xmalloc (sizeof (templates));
+ core_optab->start = optab;
- if (*l != END_OF_INSN
- && (!is_space_char (*l) || l[1] != END_OF_INSN)
- && current_templates
- && (current_templates->start->opcode_modifier & IsPrefix))
- {
- if (current_templates->start->cpu_flags
- & (flag_code != CODE_64BIT ? Cpu64 : CpuNo64))
- {
- as_bad ((flag_code != CODE_64BIT
- ? _("`%s' is only supported in 64-bit mode")
- : _("`%s' is not supported in 64-bit mode")),
- current_templates->start->name);
- return NULL;
- }
- /* If we are in 16-bit mode, do not allow addr16 or data16.
- Similarly, in 32-bit mode, do not allow addr32 or data32. */
- if ((current_templates->start->opcode_modifier & (Size16 | Size32))
- && flag_code != CODE_64BIT
- && (((current_templates->start->opcode_modifier & Size32) != 0)
- ^ (flag_code == CODE_16BIT)))
- {
- as_bad (_("redundant %s prefix"),
- current_templates->start->name);
- return NULL;
- }
- /* Add prefix, checking for repeated prefixes. */
- switch (add_prefix (current_templates->start->base_opcode))
- {
- case 0:
- return NULL;
- case 2:
- expecting_string_instruction = current_templates->start->name;
- break;
- }
- /* Skip past PREFIX_SEPARATOR and reset token_start. */
- token_start = ++l;
- }
- else
- break;
- }
+ while (1)
+ {
+ ++optab;
+ if (optab->name == NULL
+ || strcmp (optab->name, (optab - 1)->name) != 0)
+ {
+ /* different name --> ship out current template list;
+ add to hash table; & begin anew. */
+ core_optab->end = optab;
+ hash_err = hash_insert (op_hash,
+ (optab - 1)->name,
+ (void *) core_optab);
+ if (hash_err)
+ {
+ as_fatal (_("Internal Error: Can't hash %s: %s"),
+ (optab - 1)->name,
+ hash_err);
+ }
+ if (optab->name == NULL)
+ break;
+ core_optab = (templates *) xmalloc (sizeof (templates));
+ core_optab->start = optab;
+ }
+ }
+ }
- if (!current_templates)
- {
- /* See if we can get a match by trimming off a suffix. */
- switch (mnem_p[-1])
- {
- case WORD_MNEM_SUFFIX:
- if (intel_syntax && (intel_float_operand (mnemonic) & 2))
- i.suffix = SHORT_MNEM_SUFFIX;
- else
- case BYTE_MNEM_SUFFIX:
- case QWORD_MNEM_SUFFIX:
- i.suffix = mnem_p[-1];
- mnem_p[-1] = '\0';
- current_templates = hash_find (op_hash, mnemonic);
- break;
- case SHORT_MNEM_SUFFIX:
- case LONG_MNEM_SUFFIX:
- if (!intel_syntax)
- {
- i.suffix = mnem_p[-1];
- mnem_p[-1] = '\0';
- current_templates = hash_find (op_hash, mnemonic);
- }
- break;
+ /* Initialize reg_hash hash table. */
+ reg_hash = hash_new ();
+ {
+ const reg_entry *regtab;
+ unsigned int regtab_size = i386_regtab_size;
- /* Intel Syntax. */
- case 'd':
- if (intel_syntax)
- {
- if (intel_float_operand (mnemonic) == 1)
- i.suffix = SHORT_MNEM_SUFFIX;
- else
- i.suffix = LONG_MNEM_SUFFIX;
- mnem_p[-1] = '\0';
- current_templates = hash_find (op_hash, mnemonic);
- }
- break;
- }
- if (!current_templates)
- {
- as_bad (_("no such instruction: `%s'"), token_start);
- return NULL;
- }
- }
+ for (regtab = i386_regtab; regtab_size--; regtab++)
+ {
+ hash_err = hash_insert (reg_hash, regtab->reg_name, (void *) regtab);
+ if (hash_err)
+ as_fatal (_("Internal Error: Can't hash %s: %s"),
+ regtab->reg_name,
+ hash_err);
+ }
+ }
- if (current_templates->start->opcode_modifier & (Jump | JumpByte))
- {
- /* Check for a branch hint. We allow ",pt" and ",pn" for
- predict taken and predict not taken respectively.
- I'm not sure that branch hints actually do anything on loop
- and jcxz insns (JumpByte) for current Pentium4 chips. They
- may work in the future and it doesn't hurt to accept them
- now. */
- if (l[0] == ',' && l[1] == 'p')
- {
- if (l[2] == 't')
- {
- if (!add_prefix (DS_PREFIX_OPCODE))
- return NULL;
- l += 3;
- }
- else if (l[2] == 'n')
- {
- if (!add_prefix (CS_PREFIX_OPCODE))
- return NULL;
- l += 3;
- }
- }
- }
- /* Any other comma loses. */
- if (*l == ',')
- {
- as_bad (_("invalid character %s in mnemonic"),
- output_invalid (*l));
- return NULL;
- }
+ /* Fill in lexical tables: mnemonic_chars, operand_chars. */
+ {
+ int c;
+ char *p;
- /* Check if instruction is supported on specified architecture. */
- supported = 0;
- for (t = current_templates->start; t < current_templates->end; ++t)
- {
- if (!((t->cpu_flags & ~(Cpu64 | CpuNo64))
- & ~(cpu_arch_flags & ~(Cpu64 | CpuNo64))))
- supported |= 1;
- if (!(t->cpu_flags & (flag_code == CODE_64BIT ? CpuNo64 : Cpu64)))
- supported |= 2;
- }
- if (!(supported & 2))
- {
- as_bad (flag_code == CODE_64BIT
- ? _("`%s' is not supported in 64-bit mode")
- : _("`%s' is only supported in 64-bit mode"),
- current_templates->start->name);
- return NULL;
- }
- if (!(supported & 1))
+ for (c = 0; c < 256; c++)
+ {
+ if (ISDIGIT (c))
+ {
+ digit_chars[c] = c;
+ mnemonic_chars[c] = c;
+ register_chars[c] = c;
+ operand_chars[c] = c;
+ }
+ else if (ISLOWER (c))
+ {
+ mnemonic_chars[c] = c;
+ register_chars[c] = c;
+ operand_chars[c] = c;
+ }
+ else if (ISUPPER (c))
+ {
+ mnemonic_chars[c] = TOLOWER (c);
+ register_chars[c] = mnemonic_chars[c];
+ operand_chars[c] = c;
+ }
+
+ if (ISALPHA (c) || ISDIGIT (c))
+ identifier_chars[c] = c;
+ else if (c >= 128)
+ {
+ identifier_chars[c] = c;
+ operand_chars[c] = c;
+ }
+ }
+
+#ifdef LEX_AT
+ identifier_chars['@'] = '@';
+#endif
+#ifdef LEX_QM
+ identifier_chars['?'] = '?';
+ operand_chars['?'] = '?';
+#endif
+ digit_chars['-'] = '-';
+ mnemonic_chars['_'] = '_';
+ mnemonic_chars['-'] = '-';
+ mnemonic_chars['.'] = '.';
+ identifier_chars['_'] = '_';
+ identifier_chars['.'] = '.';
+
+ for (p = operand_special_chars; *p != '\0'; p++)
+ operand_chars[(unsigned char) *p] = *p;
+ }
+
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ if (IS_ELF)
{
- as_warn (_("`%s' is not supported on `%s%s'"),
- current_templates->start->name,
- cpu_arch_name,
- cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ record_alignment (text_section, 2);
+ record_alignment (data_section, 2);
+ record_alignment (bss_section, 2);
}
- else if ((Cpu386 & ~cpu_arch_flags) && (flag_code != CODE_16BIT))
+#endif
+
+ if (flag_code == CODE_64BIT)
{
- as_warn (_("use .code16 to ensure correct addressing mode"));
+ x86_dwarf2_return_column = 16;
+ x86_cie_data_alignment = -8;
}
-
- /* Check for rep/repne without a string instruction. */
- if (expecting_string_instruction)
+ else
{
- static templates override;
-
- for (t = current_templates->start; t < current_templates->end; ++t)
- if (t->opcode_modifier & IsString)
- break;
- if (t >= current_templates->end)
- {
- as_bad (_("expecting string instruction after `%s'"),
- expecting_string_instruction);
- return NULL;
- }
- for (override.start = t; t < current_templates->end; ++t)
- if (!(t->opcode_modifier & IsString))
- break;
- override.end = t;
- current_templates = &override;
+ x86_dwarf2_return_column = 8;
+ x86_cie_data_alignment = -4;
}
-
- return l;
}
-static char *
-parse_operands (char *l, const char *mnemonic)
+void
+i386_print_statistics (FILE *file)
{
- char *token_start;
+ hash_print_statistics (file, "i386 opcode", op_hash);
+ hash_print_statistics (file, "i386 register", reg_hash);
+}
+\f
+#ifdef DEBUG386
- /* 1 if operand is pending after ','. */
- unsigned int expecting_operand = 0;
+/* Debugging routines for md_assemble. */
+static void pte (insn_template *);
+static void pt (i386_operand_type);
+static void pe (expressionS *);
+static void ps (symbolS *);
- /* Non-zero if operand parens not balanced. */
- unsigned int paren_not_balanced;
+static void
+pi (char *line, i386_insn *x)
+{
+ unsigned int i;
- while (*l != END_OF_INSN)
+ fprintf (stdout, "%s: template ", line);
+ pte (&x->tm);
+ fprintf (stdout, " address: base %s index %s scale %x\n",
+ x->base_reg ? x->base_reg->reg_name : "none",
+ x->index_reg ? x->index_reg->reg_name : "none",
+ x->log2_scale_factor);
+ fprintf (stdout, " modrm: mode %x reg %x reg/mem %x\n",
+ x->rm.mode, x->rm.reg, x->rm.regmem);
+ fprintf (stdout, " sib: base %x index %x scale %x\n",
+ x->sib.base, x->sib.index, x->sib.scale);
+ fprintf (stdout, " rex: 64bit %x extX %x extY %x extZ %x\n",
+ (x->rex & REX_W) != 0,
+ (x->rex & REX_R) != 0,
+ (x->rex & REX_X) != 0,
+ (x->rex & REX_B) != 0);
+ for (i = 0; i < x->operands; i++)
{
- /* Skip optional white space before operand. */
- if (is_space_char (*l))
- ++l;
- if (!is_operand_char (*l) && *l != END_OF_INSN)
- {
- as_bad (_("invalid character %s before operand %d"),
- output_invalid (*l),
- i.operands + 1);
- return NULL;
- }
- token_start = l; /* after white space */
- paren_not_balanced = 0;
- while (paren_not_balanced || *l != ',')
- {
- if (*l == END_OF_INSN)
- {
- if (paren_not_balanced)
- {
- if (!intel_syntax)
- as_bad (_("unbalanced parenthesis in operand %d."),
- i.operands + 1);
- else
- as_bad (_("unbalanced brackets in operand %d."),
- i.operands + 1);
- return NULL;
- }
- else
- break; /* we are done */
- }
- else if (!is_operand_char (*l) && !is_space_char (*l))
- {
- as_bad (_("invalid character %s in operand %d"),
- output_invalid (*l),
- i.operands + 1);
- return NULL;
- }
- if (!intel_syntax)
- {
- if (*l == '(')
- ++paren_not_balanced;
- if (*l == ')')
- --paren_not_balanced;
- }
- else
- {
- if (*l == '[')
- ++paren_not_balanced;
- if (*l == ']')
- --paren_not_balanced;
- }
- l++;
- }
- if (l != token_start)
- { /* Yes, we've read in another operand. */
- unsigned int operand_ok;
- this_operand = i.operands++;
- if (i.operands > MAX_OPERANDS)
- {
- as_bad (_("spurious operands; (%d operands/instruction max)"),
- MAX_OPERANDS);
- return NULL;
- }
- /* Now parse operand adding info to 'i' as we go along. */
- END_STRING_AND_SAVE (l);
-
- if (intel_syntax)
- operand_ok =
- i386_intel_operand (token_start,
- intel_float_operand (mnemonic));
- else
- operand_ok = i386_operand (token_start);
-
- RESTORE_END_STRING (l);
- if (!operand_ok)
- return NULL;
- }
- else
- {
- if (expecting_operand)
- {
- expecting_operand_after_comma:
- as_bad (_("expecting operand after ','; got nothing"));
- return NULL;
- }
- if (*l == ',')
- {
- as_bad (_("expecting operand before ','; got nothing"));
- return NULL;
- }
- }
-
- /* Now *l must be either ',' or END_OF_INSN. */
- if (*l == ',')
- {
- if (*++l == END_OF_INSN)
- {
- /* Just skip it, if it's \n complain. */
- goto expecting_operand_after_comma;
- }
- expecting_operand = 1;
- }
+ fprintf (stdout, " #%d: ", i + 1);
+ pt (x->types[i]);
+ fprintf (stdout, "\n");
+ if (x->types[i].bitfield.reg8
+ || x->types[i].bitfield.reg16
+ || x->types[i].bitfield.reg32
+ || x->types[i].bitfield.reg64
+ || x->types[i].bitfield.regmmx
+ || x->types[i].bitfield.regxmm
+ || x->types[i].bitfield.regymm
+ || x->types[i].bitfield.sreg2
+ || x->types[i].bitfield.sreg3
+ || x->types[i].bitfield.control
+ || x->types[i].bitfield.debug
+ || x->types[i].bitfield.test)
+ fprintf (stdout, "%s\n", x->op[i].regs->reg_name);
+ if (operand_type_check (x->types[i], imm))
+ pe (x->op[i].imms);
+ if (operand_type_check (x->types[i], disp))
+ pe (x->op[i].disps);
}
- return l;
}
static void
-swap_2_operands (int xchg1, int xchg2)
+pte (insn_template *t)
{
- union i386_op temp_op;
- unsigned int temp_type;
- enum bfd_reloc_code_real temp_reloc;
-
- temp_type = i.types[xchg2];
- i.types[xchg2] = i.types[xchg1];
- i.types[xchg1] = temp_type;
- temp_op = i.op[xchg2];
- i.op[xchg2] = i.op[xchg1];
- i.op[xchg1] = temp_op;
- temp_reloc = i.reloc[xchg2];
- i.reloc[xchg2] = i.reloc[xchg1];
- i.reloc[xchg1] = temp_reloc;
+ unsigned int i;
+ fprintf (stdout, " %d operands ", t->operands);
+ fprintf (stdout, "opcode %x ", t->base_opcode);
+ if (t->extension_opcode != None)
+ fprintf (stdout, "ext %x ", t->extension_opcode);
+ if (t->opcode_modifier.d)
+ fprintf (stdout, "D");
+ if (t->opcode_modifier.w)
+ fprintf (stdout, "W");
+ fprintf (stdout, "\n");
+ for (i = 0; i < t->operands; i++)
+ {
+ fprintf (stdout, " #%d type ", i + 1);
+ pt (t->operand_types[i]);
+ fprintf (stdout, "\n");
+ }
}
static void
-swap_operands (void)
+pe (expressionS *e)
{
- switch (i.operands)
+ fprintf (stdout, " operation %d\n", e->X_op);
+ fprintf (stdout, " add_number %ld (%lx)\n",
+ (long) e->X_add_number, (long) e->X_add_number);
+ if (e->X_add_symbol)
{
- case 4:
- swap_2_operands (1, i.operands - 2);
- case 3:
- case 2:
- swap_2_operands (0, i.operands - 1);
- break;
- default:
- abort ();
+ fprintf (stdout, " add_symbol ");
+ ps (e->X_add_symbol);
+ fprintf (stdout, "\n");
}
-
- if (i.mem_operands == 2)
+ if (e->X_op_symbol)
{
- const seg_entry *temp_seg;
- temp_seg = i.seg[0];
- i.seg[0] = i.seg[1];
- i.seg[1] = temp_seg;
+ fprintf (stdout, " op_symbol ");
+ ps (e->X_op_symbol);
+ fprintf (stdout, "\n");
}
}
-/* Try to ensure constant immediates are represented in the smallest
- opcode possible. */
static void
-optimize_imm (void)
+ps (symbolS *s)
{
- char guess_suffix = 0;
- int op;
+ fprintf (stdout, "%s type %s%s",
+ S_GET_NAME (s),
+ S_IS_EXTERNAL (s) ? "EXTERNAL " : "",
+ segment_name (S_GET_SEGMENT (s)));
+}
- if (i.suffix)
- guess_suffix = i.suffix;
- else if (i.reg_operands)
+static struct type_name
+ {
+ i386_operand_type mask;
+ const char *name;
+ }
+const type_names[] =
+{
+ { OPERAND_TYPE_REG8, "r8" },
+ { OPERAND_TYPE_REG16, "r16" },
+ { OPERAND_TYPE_REG32, "r32" },
+ { OPERAND_TYPE_REG64, "r64" },
+ { OPERAND_TYPE_IMM8, "i8" },
+ { OPERAND_TYPE_IMM8, "i8s" },
+ { OPERAND_TYPE_IMM16, "i16" },
+ { OPERAND_TYPE_IMM32, "i32" },
+ { OPERAND_TYPE_IMM32S, "i32s" },
+ { OPERAND_TYPE_IMM64, "i64" },
+ { OPERAND_TYPE_IMM1, "i1" },
+ { OPERAND_TYPE_BASEINDEX, "BaseIndex" },
+ { OPERAND_TYPE_DISP8, "d8" },
+ { OPERAND_TYPE_DISP16, "d16" },
+ { OPERAND_TYPE_DISP32, "d32" },
+ { OPERAND_TYPE_DISP32S, "d32s" },
+ { OPERAND_TYPE_DISP64, "d64" },
+ { OPERAND_TYPE_INOUTPORTREG, "InOutPortReg" },
+ { OPERAND_TYPE_SHIFTCOUNT, "ShiftCount" },
+ { OPERAND_TYPE_CONTROL, "control reg" },
+ { OPERAND_TYPE_TEST, "test reg" },
+ { OPERAND_TYPE_DEBUG, "debug reg" },
+ { OPERAND_TYPE_FLOATREG, "FReg" },
+ { OPERAND_TYPE_FLOATACC, "FAcc" },
+ { OPERAND_TYPE_SREG2, "SReg2" },
+ { OPERAND_TYPE_SREG3, "SReg3" },
+ { OPERAND_TYPE_ACC, "Acc" },
+ { OPERAND_TYPE_JUMPABSOLUTE, "Jump Absolute" },
+ { OPERAND_TYPE_REGMMX, "rMMX" },
+ { OPERAND_TYPE_REGXMM, "rXMM" },
+ { OPERAND_TYPE_REGYMM, "rYMM" },
+ { OPERAND_TYPE_ESSEG, "es" },
+};
+
+static void
+pt (i386_operand_type t)
+{
+ unsigned int j;
+ i386_operand_type a;
+
+ for (j = 0; j < ARRAY_SIZE (type_names); j++)
{
- /* Figure out a suffix from the last register operand specified.
- We can't do this properly yet, ie. excluding InOutPortReg,
- but the following works for instructions with immediates.
- In any case, we can't set i.suffix yet. */
- for (op = i.operands; --op >= 0;)
- if (i.types[op] & Reg)
+ a = operand_type_and (t, type_names[j].mask);
+ if (!operand_type_all_zero (&a))
+ fprintf (stdout, "%s, ", type_names[j].name);
+ }
+ fflush (stdout);
+}
+
+#endif /* DEBUG386 */
+\f
+static bfd_reloc_code_real_type
+reloc (unsigned int size,
+ int pcrel,
+ int sign,
+ bfd_reloc_code_real_type other)
+{
+ if (other != NO_RELOC)
+ {
+ reloc_howto_type *reloc;
+
+ if (size == 8)
+ switch (other)
{
- if (i.types[op] & Reg8)
- guess_suffix = BYTE_MNEM_SUFFIX;
- else if (i.types[op] & Reg16)
- guess_suffix = WORD_MNEM_SUFFIX;
- else if (i.types[op] & Reg32)
- guess_suffix = LONG_MNEM_SUFFIX;
- else if (i.types[op] & Reg64)
- guess_suffix = QWORD_MNEM_SUFFIX;
+ case BFD_RELOC_X86_64_GOT32:
+ return BFD_RELOC_X86_64_GOT64;
+ break;
+ case BFD_RELOC_X86_64_PLTOFF64:
+ return BFD_RELOC_X86_64_PLTOFF64;
+ break;
+ case BFD_RELOC_X86_64_GOTPC32:
+ other = BFD_RELOC_X86_64_GOTPC64;
+ break;
+ case BFD_RELOC_X86_64_GOTPCREL:
+ other = BFD_RELOC_X86_64_GOTPCREL64;
+ break;
+ case BFD_RELOC_X86_64_TPOFF32:
+ other = BFD_RELOC_X86_64_TPOFF64;
+ break;
+ case BFD_RELOC_X86_64_DTPOFF32:
+ other = BFD_RELOC_X86_64_DTPOFF64;
+ break;
+ default:
break;
}
- }
- else if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
- guess_suffix = WORD_MNEM_SUFFIX;
- for (op = i.operands; --op >= 0;)
- if (i.types[op] & Imm)
- {
- switch (i.op[op].imms->X_op)
- {
- case O_constant:
- /* If a suffix is given, this operand may be shortened. */
- switch (guess_suffix)
- {
- case LONG_MNEM_SUFFIX:
- i.types[op] |= Imm32 | Imm64;
- break;
- case WORD_MNEM_SUFFIX:
- i.types[op] |= Imm16 | Imm32S | Imm32 | Imm64;
- break;
- case BYTE_MNEM_SUFFIX:
- i.types[op] |= Imm16 | Imm8 | Imm8S | Imm32S | Imm32 | Imm64;
- break;
- }
+ /* Sign-checking 4-byte relocations in 16-/32-bit code is pointless. */
+ if (size == 4 && flag_code != CODE_64BIT)
+ sign = -1;
- /* If this operand is at most 16 bits, convert it
- to a signed 16 bit number before trying to see
- whether it will fit in an even smaller size.
- This allows a 16-bit operand such as $0xffe0 to
- be recognised as within Imm8S range. */
- if ((i.types[op] & Imm16)
- && (i.op[op].imms->X_add_number & ~(offsetT) 0xffff) == 0)
- {
- i.op[op].imms->X_add_number =
- (((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
- }
- if ((i.types[op] & Imm32)
- && ((i.op[op].imms->X_add_number & ~(((offsetT) 2 << 31) - 1))
- == 0))
- {
- i.op[op].imms->X_add_number = ((i.op[op].imms->X_add_number
- ^ ((offsetT) 1 << 31))
- - ((offsetT) 1 << 31));
- }
- i.types[op] |= smallest_imm_type (i.op[op].imms->X_add_number);
-
- /* We must avoid matching of Imm32 templates when 64bit
- only immediate is available. */
- if (guess_suffix == QWORD_MNEM_SUFFIX)
- i.types[op] &= ~Imm32;
- break;
-
- case O_absent:
- case O_register:
- abort ();
-
- /* Symbols and expressions. */
- default:
- /* Convert symbolic operand to proper sizes for matching, but don't
- prevent matching a set of insns that only supports sizes other
- than those matching the insn suffix. */
- {
- unsigned int mask, allowed = 0;
- const template *t;
+ reloc = bfd_reloc_type_lookup (stdoutput, other);
+ if (!reloc)
+ as_bad (_("unknown relocation (%u)"), other);
+ else if (size != bfd_get_reloc_size (reloc))
+ as_bad (_("%u-byte relocation cannot be applied to %u-byte field"),
+ bfd_get_reloc_size (reloc),
+ size);
+ else if (pcrel && !reloc->pc_relative)
+ as_bad (_("non-pc-relative relocation for pc-relative field"));
+ else if ((reloc->complain_on_overflow == complain_overflow_signed
+ && !sign)
+ || (reloc->complain_on_overflow == complain_overflow_unsigned
+ && sign > 0))
+ as_bad (_("relocated field and relocation type differ in signedness"));
+ else
+ return other;
+ return NO_RELOC;
+ }
- for (t = current_templates->start;
- t < current_templates->end;
- ++t)
- allowed |= t->operand_types[op];
- switch (guess_suffix)
- {
- case QWORD_MNEM_SUFFIX:
- mask = Imm64 | Imm32S;
- break;
- case LONG_MNEM_SUFFIX:
- mask = Imm32;
- break;
- case WORD_MNEM_SUFFIX:
- mask = Imm16;
- break;
- case BYTE_MNEM_SUFFIX:
- mask = Imm8;
- break;
- default:
- mask = 0;
- break;
- }
- if (mask & allowed)
- i.types[op] &= mask;
- }
- break;
+ if (pcrel)
+ {
+ if (!sign)
+ as_bad (_("there are no unsigned pc-relative relocations"));
+ switch (size)
+ {
+ case 1: return BFD_RELOC_8_PCREL;
+ case 2: return BFD_RELOC_16_PCREL;
+ case 4: return BFD_RELOC_32_PCREL;
+ case 8: return BFD_RELOC_64_PCREL;
+ }
+ as_bad (_("cannot do %u byte pc-relative relocation"), size);
+ }
+ else
+ {
+ if (sign > 0)
+ switch (size)
+ {
+ case 4: return BFD_RELOC_X86_64_32S;
}
- }
+ else
+ switch (size)
+ {
+ case 1: return BFD_RELOC_8;
+ case 2: return BFD_RELOC_16;
+ case 4: return BFD_RELOC_32;
+ case 8: return BFD_RELOC_64;
+ }
+ as_bad (_("cannot do %s %u byte relocation"),
+ sign > 0 ? "signed" : "unsigned", size);
+ }
+
+ return NO_RELOC;
}
-/* Try to use the smallest displacement type too. */
-static void
-optimize_disp (void)
+/* Here we decide which fixups can be adjusted to make them relative to
+ the beginning of the section instead of the symbol. Basically we need
+ to make sure that the dynamic relocations are done correctly, so in
+ some cases we force the original symbol to be used. */
+
+int
+tc_i386_fix_adjustable (fixS *fixP ATTRIBUTE_UNUSED)
{
- int op;
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ if (!IS_ELF)
+ return 1;
- for (op = i.operands; --op >= 0;)
- if (i.types[op] & Disp)
- {
- if (i.op[op].disps->X_op == O_constant)
- {
- offsetT disp = i.op[op].disps->X_add_number;
+ /* Don't adjust pc-relative references to merge sections in 64-bit
+ mode. */
+ if (use_rela_relocations
+ && (S_GET_SEGMENT (fixP->fx_addsy)->flags & SEC_MERGE) != 0
+ && fixP->fx_pcrel)
+ return 0;
- if ((i.types[op] & Disp16)
- && (disp & ~(offsetT) 0xffff) == 0)
- {
- /* If this operand is at most 16 bits, convert
- to a signed 16 bit number and don't use 64bit
- displacement. */
- disp = (((disp & 0xffff) ^ 0x8000) - 0x8000);
- i.types[op] &= ~Disp64;
- }
- if ((i.types[op] & Disp32)
- && (disp & ~(((offsetT) 2 << 31) - 1)) == 0)
- {
- /* If this operand is at most 32 bits, convert
- to a signed 32 bit number and don't use 64bit
- displacement. */
- disp &= (((offsetT) 2 << 31) - 1);
- disp = (disp ^ ((offsetT) 1 << 31)) - ((addressT) 1 << 31);
- i.types[op] &= ~Disp64;
- }
- if (!disp && (i.types[op] & BaseIndex))
- {
- i.types[op] &= ~Disp;
- i.op[op].disps = 0;
- i.disp_operands--;
- }
- else if (flag_code == CODE_64BIT)
- {
- if (fits_in_signed_long (disp))
- {
- i.types[op] &= ~Disp64;
- i.types[op] |= Disp32S;
- }
- if (fits_in_unsigned_long (disp))
- i.types[op] |= Disp32;
- }
- if ((i.types[op] & (Disp32 | Disp32S | Disp16))
- && fits_in_signed_byte (disp))
- i.types[op] |= Disp8;
- }
- else if (i.reloc[op] == BFD_RELOC_386_TLS_DESC_CALL
- || i.reloc[op] == BFD_RELOC_X86_64_TLSDESC_CALL)
- {
- fix_new_exp (frag_now, frag_more (0) - frag_now->fr_literal, 0,
- i.op[op].disps, 0, i.reloc[op]);
- i.types[op] &= ~Disp;
- }
- else
- /* We only support 64bit displacement on constants. */
- i.types[op] &= ~Disp64;
- }
+ /* The x86_64 GOTPCREL are represented as 32bit PCrel relocations
+ and changed later by validate_fix. */
+ if (GOT_symbol && fixP->fx_subsy == GOT_symbol
+ && fixP->fx_r_type == BFD_RELOC_32_PCREL)
+ return 0;
+
+ /* adjust_reloc_syms doesn't know about the GOT. */
+ if (fixP->fx_r_type == BFD_RELOC_386_GOTOFF
+ || fixP->fx_r_type == BFD_RELOC_386_PLT32
+ || fixP->fx_r_type == BFD_RELOC_386_GOT32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_GD
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LDM
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LDO_32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_IE_32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_IE
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_GOTIE
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LE_32
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_LE
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_GOTDESC
+ || fixP->fx_r_type == BFD_RELOC_386_TLS_DESC_CALL
+ || fixP->fx_r_type == BFD_RELOC_X86_64_PLT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOT32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPCREL
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TLSGD
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TLSLD
+ || fixP->fx_r_type == BFD_RELOC_X86_64_DTPOFF32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_DTPOFF64
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTTPOFF
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF32
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TPOFF64
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTOFF64
+ || fixP->fx_r_type == BFD_RELOC_X86_64_GOTPC32_TLSDESC
+ || fixP->fx_r_type == BFD_RELOC_X86_64_TLSDESC_CALL
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_INHERIT
+ || fixP->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ return 0;
+#endif
+ return 1;
}
static int
-match_template (void)
+intel_float_operand (const char *mnemonic)
{
- /* Points to template once we've found it. */
- const template *t;
- unsigned int overlap0, overlap1, overlap2, overlap3;
- unsigned int found_reverse_match;
- int suffix_check;
- unsigned int operand_types [MAX_OPERANDS];
- int addr_prefix_disp;
- unsigned int j;
-
-#if MAX_OPERANDS != 4
-# error "MAX_OPERANDS must be 4."
-#endif
+ /* Note that the value returned is meaningful only for opcodes with (memory)
+ operands, hence the code here is free to improperly handle opcodes that
+ have no operands (for better performance and smaller code). */
-#define MATCH(overlap, given, template) \
- ((overlap & ~JumpAbsolute) \
- && (((given) & (BaseIndex | JumpAbsolute)) \
- == ((overlap) & (BaseIndex | JumpAbsolute))))
-
- /* If given types r0 and r1 are registers they must be of the same type
- unless the expected operand type register overlap is null.
- Note that Acc in a template matches every size of reg. */
-#define CONSISTENT_REGISTER_MATCH(m0, g0, t0, m1, g1, t1) \
- (((g0) & Reg) == 0 || ((g1) & Reg) == 0 \
- || ((g0) & Reg) == ((g1) & Reg) \
- || ((((m0) & Acc) ? Reg : (t0)) & (((m1) & Acc) ? Reg : (t1)) & Reg) == 0 )
-
- overlap0 = 0;
- overlap1 = 0;
- overlap2 = 0;
- overlap3 = 0;
- found_reverse_match = 0;
- for (j = 0; j < MAX_OPERANDS; j++)
- operand_types [j] = 0;
- addr_prefix_disp = -1;
- suffix_check = (i.suffix == BYTE_MNEM_SUFFIX
- ? No_bSuf
- : (i.suffix == WORD_MNEM_SUFFIX
- ? No_wSuf
- : (i.suffix == SHORT_MNEM_SUFFIX
- ? No_sSuf
- : (i.suffix == LONG_MNEM_SUFFIX
- ? No_lSuf
- : (i.suffix == QWORD_MNEM_SUFFIX
- ? No_qSuf
- : (i.suffix == LONG_DOUBLE_MNEM_SUFFIX
- ? No_xSuf : 0))))));
+ if (mnemonic[0] != 'f')
+ return 0; /* non-math */
- for (t = current_templates->start; t < current_templates->end; t++)
+ switch (mnemonic[1])
{
- addr_prefix_disp = -1;
+ /* fclex, fdecstp, fdisi, femms, feni, fincstp, finit, fsetpm, and
+ the fs segment override prefix not currently handled because no
+ call path can make opcodes without operands get here */
+ case 'i':
+ return 2 /* integer op */;
+ case 'l':
+ if (mnemonic[2] == 'd' && (mnemonic[3] == 'c' || mnemonic[3] == 'e'))
+ return 3; /* fldcw/fldenv */
+ break;
+ case 'n':
+ if (mnemonic[2] != 'o' /* fnop */)
+ return 3; /* non-waiting control op */
+ break;
+ case 'r':
+ if (mnemonic[2] == 's')
+ return 3; /* frstor/frstpm */
+ break;
+ case 's':
+ if (mnemonic[2] == 'a')
+ return 3; /* fsave */
+ if (mnemonic[2] == 't')
+ {
+ switch (mnemonic[3])
+ {
+ case 'c': /* fstcw */
+ case 'd': /* fstdw */
+ case 'e': /* fstenv */
+ case 's': /* fsts[gw] */
+ return 3;
+ }
+ }
+ break;
+ case 'x':
+ if (mnemonic[2] == 'r' || mnemonic[2] == 's')
+ return 0; /* fxsave/fxrstor are not really math ops */
+ break;
+ }
- /* Must have right number of operands. */
- if (i.operands != t->operands)
- continue;
+ return 1;
+}
- /* Check the suffix, except for some instructions in intel mode. */
- if ((t->opcode_modifier & suffix_check)
- && !(intel_syntax
- && (t->opcode_modifier & IgnoreSize)))
- continue;
+/* Build the VEX prefix. */
- for (j = 0; j < MAX_OPERANDS; j++)
- operand_types [j] = t->operand_types [j];
+static void
+build_vex_prefix (const insn_template *t)
+{
+ unsigned int register_specifier;
+ unsigned int implied_prefix;
+ unsigned int vector_length;
- /* In general, don't allow 64-bit operands in 32-bit mode. */
- if (i.suffix == QWORD_MNEM_SUFFIX
- && flag_code != CODE_64BIT
- && (intel_syntax
- ? (!(t->opcode_modifier & IgnoreSize)
- && !intel_float_operand (t->name))
- : intel_float_operand (t->name) != 2)
- && (!(operand_types[0] & (RegMMX | RegXMM))
- || !(operand_types[t->operands > 1] & (RegMMX | RegXMM)))
- && (t->base_opcode != 0x0fc7
- || t->extension_opcode != 1 /* cmpxchg8b */))
- continue;
+ /* Check register specifier. */
+ if (i.vex.register_specifier)
+ {
+ register_specifier = i.vex.register_specifier->reg_num;
+ if ((i.vex.register_specifier->reg_flags & RegRex))
+ register_specifier += 8;
+ register_specifier = ~register_specifier & 0xf;
+ }
+ else
+ register_specifier = 0xf;
- /* Do not verify operands when there are none. */
- else if (!t->operands)
- {
- if (t->cpu_flags & ~cpu_arch_flags)
- continue;
- /* We've found a match; break out of loop. */
- break;
- }
+ /* Use 2-byte VEX prefix by swappping destination and source
+ operand. */
+ if (!i.swap_operand
+ && i.operands == i.reg_operands
+ && i.tm.opcode_modifier.vex0f
+ && i.tm.opcode_modifier.s
+ && i.rex == REX_B)
+ {
+ unsigned int xchg = i.operands - 1;
+ union i386_op temp_op;
+ i386_operand_type temp_type;
- /* Address size prefix will turn Disp64/Disp32/Disp16 operand
- into Disp32/Disp16/Disp32 operand. */
- if (i.prefix[ADDR_PREFIX] != 0)
- {
- unsigned int DispOn = 0, DispOff = 0;
+ temp_type = i.types[xchg];
+ i.types[xchg] = i.types[0];
+ i.types[0] = temp_type;
+ temp_op = i.op[xchg];
+ i.op[xchg] = i.op[0];
+ i.op[0] = temp_op;
- switch (flag_code)
- {
- case CODE_16BIT:
- DispOn = Disp32;
- DispOff = Disp16;
- break;
- case CODE_32BIT:
- DispOn = Disp16;
- DispOff = Disp32;
- break;
- case CODE_64BIT:
- DispOn = Disp32;
- DispOff = Disp64;
- break;
- }
+ gas_assert (i.rm.mode == 3);
- for (j = 0; j < MAX_OPERANDS; j++)
- {
- /* There should be only one Disp operand. */
- if ((operand_types[j] & DispOff))
- {
- addr_prefix_disp = j;
- operand_types[j] |= DispOn;
- operand_types[j] &= ~DispOff;
- break;
- }
- }
- }
+ i.rex = REX_R;
+ xchg = i.rm.regmem;
+ i.rm.regmem = i.rm.reg;
+ i.rm.reg = xchg;
- overlap0 = i.types[0] & operand_types[0];
- switch (t->operands)
- {
- case 1:
- if (!MATCH (overlap0, i.types[0], operand_types[0]))
- continue;
- break;
- case 2:
- /* xchg %eax, %eax is a special case. It is an aliase for nop
- only in 32bit mode and we can use opcode 0x90. In 64bit
- mode, we can't use 0x90 for xchg %eax, %eax since it should
- zero-extend %eax to %rax. */
- if (flag_code == CODE_64BIT
- && t->base_opcode == 0x90
- && i.types [0] == (Acc | Reg32)
- && i.types [1] == (Acc | Reg32))
- continue;
- case 3:
- case 4:
- overlap1 = i.types[1] & operand_types[1];
- if (!MATCH (overlap0, i.types[0], operand_types[0])
- || !MATCH (overlap1, i.types[1], operand_types[1])
- /* monitor in SSE3 is a very special case. The first
- register and the second register may have different
- sizes. The same applies to crc32 in SSE4.2. */
- || !((t->base_opcode == 0x0f01
- && t->extension_opcode == 0xc8)
- || t->base_opcode == 0xf20f38f1
- || CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
- operand_types[0],
- overlap1, i.types[1],
- operand_types[1])))
- {
- /* Check if other direction is valid ... */
- if ((t->opcode_modifier & (D | FloatD)) == 0)
- continue;
+ /* Use the next insn. */
+ i.tm = t[1];
+ }
- /* Try reversing direction of operands. */
- overlap0 = i.types[0] & operand_types[1];
- overlap1 = i.types[1] & operand_types[0];
- if (!MATCH (overlap0, i.types[0], operand_types[1])
- || !MATCH (overlap1, i.types[1], operand_types[0])
- || !CONSISTENT_REGISTER_MATCH (overlap0, i.types[0],
- operand_types[1],
- overlap1, i.types[1],
- operand_types[0]))
- {
- /* Does not match either direction. */
- continue;
- }
- /* found_reverse_match holds which of D or FloatDR
- we've found. */
- if ((t->opcode_modifier & D))
- found_reverse_match = Opcode_D;
- else if ((t->opcode_modifier & FloatD))
- found_reverse_match = Opcode_FloatD;
- else
- found_reverse_match = 0;
- if ((t->opcode_modifier & FloatR))
- found_reverse_match |= Opcode_FloatR;
- }
- else
- {
- /* Found a forward 2 operand match here. */
- switch (t->operands)
- {
- case 4:
- overlap3 = i.types[3] & operand_types[3];
- case 3:
- overlap2 = i.types[2] & operand_types[2];
- break;
- }
+ vector_length = i.tm.opcode_modifier.vex256 ? 1 : 0;
- switch (t->operands)
- {
- case 4:
- if (!MATCH (overlap3, i.types[3], operand_types[3])
- || !CONSISTENT_REGISTER_MATCH (overlap2,
- i.types[2],
- operand_types[2],
- overlap3,
- i.types[3],
- operand_types[3]))
- continue;
- case 3:
- /* Here we make use of the fact that there are no
- reverse match 3 operand instructions, and all 3
- operand instructions only need to be checked for
- register consistency between operands 2 and 3. */
- if (!MATCH (overlap2, i.types[2], operand_types[2])
- || !CONSISTENT_REGISTER_MATCH (overlap1,
- i.types[1],
- operand_types[1],
- overlap2,
- i.types[2],
- operand_types[2]))
- continue;
- break;
- }
- }
- /* Found either forward/reverse 2, 3 or 4 operand match here:
- slip through to break. */
- }
- if (t->cpu_flags & ~cpu_arch_flags)
- {
- found_reverse_match = 0;
- continue;
- }
- /* We've found a match; break out of loop. */
+ switch ((i.tm.base_opcode >> 8) & 0xff)
+ {
+ case 0:
+ implied_prefix = 0;
+ break;
+ case DATA_PREFIX_OPCODE:
+ implied_prefix = 1;
+ break;
+ case REPE_PREFIX_OPCODE:
+ implied_prefix = 2;
+ break;
+ case REPNE_PREFIX_OPCODE:
+ implied_prefix = 3;
break;
+ default:
+ abort ();
}
- if (t == current_templates->end)
+ /* Use 2-byte VEX prefix if possible. */
+ if (i.tm.opcode_modifier.vex0f
+ && (i.rex & (REX_W | REX_X | REX_B)) == 0)
{
- /* We found no match. */
- as_bad (_("suffix or operands invalid for `%s'"),
- current_templates->start->name);
- return 0;
- }
+ /* 2-byte VEX prefix. */
+ unsigned int r;
- if (!quiet_warnings)
+ i.vex.length = 2;
+ i.vex.bytes[0] = 0xc5;
+
+ /* Check the REX.R bit. */
+ r = (i.rex & REX_R) ? 0 : 1;
+ i.vex.bytes[1] = (r << 7
+ | register_specifier << 3
+ | vector_length << 2
+ | implied_prefix);
+ }
+ else
{
- if (!intel_syntax
- && ((i.types[0] & JumpAbsolute)
- != (operand_types[0] & JumpAbsolute)))
- {
- as_warn (_("indirect %s without `*'"), t->name);
- }
+ /* 3-byte VEX prefix. */
+ unsigned int m, w;
+
+ if (i.tm.opcode_modifier.vex0f)
+ m = 0x1;
+ else if (i.tm.opcode_modifier.vex0f38)
+ m = 0x2;
+ else if (i.tm.opcode_modifier.vex0f3a)
+ m = 0x3;
+ else
+ abort ();
+
+ i.vex.length = 3;
+ i.vex.bytes[0] = 0xc4;
+
+ /* The high 3 bits of the second VEX byte are 1's compliment
+ of RXB bits from REX. */
+ i.vex.bytes[1] = (~i.rex & 0x7) << 5 | m;
- if ((t->opcode_modifier & (IsPrefix | IgnoreSize))
- == (IsPrefix | IgnoreSize))
+ /* Check the REX.W bit. */
+ w = (i.rex & REX_W) ? 1 : 0;
+ if (i.tm.opcode_modifier.vexw0 || i.tm.opcode_modifier.vexw1)
{
- /* Warn them that a data or address size prefix doesn't
- affect assembly of the next line of code. */
- as_warn (_("stand-alone `%s' prefix"), t->name);
+ if (w)
+ abort ();
+
+ if (i.tm.opcode_modifier.vexw1)
+ w = 1;
}
- }
- /* Copy the template we found. */
- i.tm = *t;
+ i.vex.bytes[2] = (w << 7
+ | register_specifier << 3
+ | vector_length << 2
+ | implied_prefix);
+ }
+}
- if (addr_prefix_disp != -1)
- i.tm.operand_types[addr_prefix_disp]
- = operand_types[addr_prefix_disp];
+static void
+process_immext (void)
+{
+ expressionS *exp;
- if (found_reverse_match)
+ if (i.tm.cpu_flags.bitfield.cpusse3 && i.operands > 0)
{
- /* If we found a reverse match we must alter the opcode
- direction bit. found_reverse_match holds bits to change
- (different for int & float insns). */
+ /* SSE3 Instructions have the fixed operands with an opcode
+ suffix which is coded in the same place as an 8-bit immediate
+ field would be. Here we check those operands and remove them
+ afterwards. */
+ unsigned int x;
- i.tm.base_opcode ^= found_reverse_match;
+ for (x = 0; x < i.operands; x++)
+ if (i.op[x].regs->reg_num != x)
+ as_bad (_("can't use register '%s%s' as operand %d in '%s'."),
+ register_prefix, i.op[x].regs->reg_name, x + 1,
+ i.tm.name);
- i.tm.operand_types[0] = operand_types[1];
- i.tm.operand_types[1] = operand_types[0];
+ i.operands = 0;
}
- return 1;
+ /* These AMD 3DNow! and SSE2 instructions have an opcode suffix
+ which is coded in the same place as an 8-bit immediate field
+ would be. Here we fake an 8-bit immediate operand from the
+ opcode suffix stored in tm.extension_opcode.
+
+ AVX instructions also use this encoding, for some of
+ 3 argument instructions. */
+
+ gas_assert (i.imm_operands == 0
+ && (i.operands <= 2
+ || (i.tm.opcode_modifier.vex
+ && i.operands <= 4)));
+
+ exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands] = imm8;
+ i.operands++;
+ exp->X_op = O_constant;
+ exp->X_add_number = i.tm.extension_opcode;
+ i.tm.extension_opcode = None;
}
-static int
-check_string (void)
+/* This is the guts of the machine-dependent assembler. LINE points to a
+ machine dependent instruction. This function is supposed to emit
+ the frags/bytes it assembles to. */
+
+void
+md_assemble (char *line)
{
- int mem_op = (i.types[0] & AnyMem) ? 0 : 1;
- if ((i.tm.operand_types[mem_op] & EsSeg) != 0)
+ unsigned int j;
+ char mnemonic[MAX_MNEM_SIZE];
+ const insn_template *t;
+
+ /* Initialize globals. */
+ memset (&i, '\0', sizeof (i));
+ for (j = 0; j < MAX_OPERANDS; j++)
+ i.reloc[j] = NO_RELOC;
+ memset (disp_expressions, '\0', sizeof (disp_expressions));
+ memset (im_expressions, '\0', sizeof (im_expressions));
+ save_stack_p = save_stack;
+
+ /* First parse an instruction mnemonic & call i386_operand for the operands.
+ We assume that the scrubber has arranged it so that line[0] is the valid
+ start of a (possibly prefixed) mnemonic. */
+
+ line = parse_insn (line, mnemonic);
+ if (line == NULL)
+ return;
+
+ line = parse_operands (line, mnemonic);
+ this_operand = -1;
+ if (line == NULL)
+ return;
+
+ /* Now we've parsed the mnemonic into a set of templates, and have the
+ operands at hand. */
+
+ /* All intel opcodes have reversed operands except for "bound" and
+ "enter". We also don't reverse intersegment "jmp" and "call"
+ instructions with 2 immediate operands so that the immediate segment
+ precedes the offset, as it does when in AT&T mode. */
+ if (intel_syntax
+ && i.operands > 1
+ && (strcmp (mnemonic, "bound") != 0)
+ && (strcmp (mnemonic, "invlpga") != 0)
+ && !(operand_type_check (i.types[0], imm)
+ && operand_type_check (i.types[1], imm)))
+ swap_operands ();
+
+ /* The order of the immediates should be reversed
+ for 2 immediates extrq and insertq instructions */
+ if (i.imm_operands == 2
+ && (strcmp (mnemonic, "extrq") == 0
+ || strcmp (mnemonic, "insertq") == 0))
+ swap_2_operands (0, 1);
+
+ if (i.imm_operands)
+ optimize_imm ();
+
+ /* Don't optimize displacement for movabs since it only takes 64bit
+ displacement. */
+ if (i.disp_operands
+ && (flag_code != CODE_64BIT
+ || strcmp (mnemonic, "movabs") != 0))
+ optimize_disp ();
+
+ /* Next, we find a template that matches the given insn,
+ making sure the overlap of the given operands types is consistent
+ with the template operand types. */
+
+ if (!(t = match_template ()))
+ return;
+
+ if (sse_check != sse_check_none
+ && !i.tm.opcode_modifier.noavx
+ && (i.tm.cpu_flags.bitfield.cpusse
+ || i.tm.cpu_flags.bitfield.cpusse2
+ || i.tm.cpu_flags.bitfield.cpusse3
+ || i.tm.cpu_flags.bitfield.cpussse3
+ || i.tm.cpu_flags.bitfield.cpusse4_1
+ || i.tm.cpu_flags.bitfield.cpusse4_2))
{
- if (i.seg[0] != NULL && i.seg[0] != &es)
- {
- as_bad (_("`%s' operand %d must use `%%es' segment"),
- i.tm.name,
- mem_op + 1);
- return 0;
- }
- /* There's only ever one segment override allowed per instruction.
- This instruction possibly has a legal segment override on the
- second operand, so copy the segment to where non-string
- instructions store it, allowing common code. */
- i.seg[0] = i.seg[1];
+ (sse_check == sse_check_warning
+ ? as_warn
+ : as_bad) (_("SSE instruction `%s' is used"), i.tm.name);
}
- else if ((i.tm.operand_types[mem_op + 1] & EsSeg) != 0)
+
+ /* Zap movzx and movsx suffix. The suffix has been set from
+ "word ptr" or "byte ptr" on the source operand in Intel syntax
+ or extracted from mnemonic in AT&T syntax. But we'll use
+ the destination register to choose the suffix for encoding. */
+ if ((i.tm.base_opcode & ~9) == 0x0fb6)
{
- if (i.seg[1] != NULL && i.seg[1] != &es)
- {
- as_bad (_("`%s' operand %d must use `%%es' segment"),
- i.tm.name,
- mem_op + 2);
- return 0;
- }
+ /* In Intel syntax, there must be a suffix. In AT&T syntax, if
+ there is no suffix, the default will be byte extension. */
+ if (i.reg_operands != 2
+ && !i.suffix
+ && intel_syntax)
+ as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
+
+ i.suffix = 0;
}
- return 1;
-}
-static int
-process_suffix (void)
-{
- /* If matched instruction specifies an explicit instruction mnemonic
- suffix, use it. */
- if (i.tm.opcode_modifier & (Size16 | Size32 | Size64))
+ if (i.tm.opcode_modifier.fwait)
+ if (!add_prefix (FWAIT_OPCODE))
+ return;
+
+ /* Check string instruction segment overrides. */
+ if (i.tm.opcode_modifier.isstring && i.mem_operands != 0)
{
- if (i.tm.opcode_modifier & Size16)
- i.suffix = WORD_MNEM_SUFFIX;
- else if (i.tm.opcode_modifier & Size64)
- i.suffix = QWORD_MNEM_SUFFIX;
- else
- i.suffix = LONG_MNEM_SUFFIX;
+ if (!check_string ())
+ return;
+ i.disp_operands = 0;
}
- else if (i.reg_operands)
- {
- /* If there's no instruction mnemonic suffix we try to invent one
- based on register operands. */
- if (!i.suffix)
- {
- /* We take i.suffix from the last register operand specified,
- Destination register type is more significant than source
- register type. crc32 in SSE4.2 prefers source register
- type. */
- if (i.tm.base_opcode == 0xf20f38f1)
- {
- if ((i.types[0] & Reg))
- i.suffix = ((i.types[0] & Reg16) ? WORD_MNEM_SUFFIX :
- LONG_MNEM_SUFFIX);
- }
- else if (i.tm.base_opcode == 0xf20f38f0)
- {
- if ((i.types[0] & Reg8))
- i.suffix = BYTE_MNEM_SUFFIX;
- }
- if (!i.suffix)
+ if (!process_suffix ())
+ return;
+
+ /* Update operand types. */
+ for (j = 0; j < i.operands; j++)
+ i.types[j] = operand_type_and (i.types[j], i.tm.operand_types[j]);
+
+ /* Make still unresolved immediate matches conform to size of immediate
+ given in i.suffix. */
+ if (!finalize_imm ())
+ return;
+
+ if (i.types[0].bitfield.imm1)
+ i.imm_operands = 0; /* kludge for shift insns. */
+
+ /* We only need to check those implicit registers for instructions
+ with 3 operands or less. */
+ if (i.operands <= 3)
+ for (j = 0; j < i.operands; j++)
+ if (i.types[j].bitfield.inoutportreg
+ || i.types[j].bitfield.shiftcount
+ || i.types[j].bitfield.acc
+ || i.types[j].bitfield.floatacc)
+ i.reg_operands--;
+
+ /* ImmExt should be processed after SSE2AVX. */
+ if (!i.tm.opcode_modifier.sse2avx
+ && i.tm.opcode_modifier.immext)
+ process_immext ();
+
+ /* For insns with operands there are more diddles to do to the opcode. */
+ if (i.operands)
+ {
+ if (!process_operands ())
+ return;
+ }
+ else if (!quiet_warnings && i.tm.opcode_modifier.ugh)
+ {
+ /* UnixWare fsub no args is alias for fsubp, fadd -> faddp, etc. */
+ as_warn (_("translating to `%sp'"), i.tm.name);
+ }
+
+ if (i.tm.opcode_modifier.vex)
+ build_vex_prefix (t);
+
+ /* Handle conversion of 'int $3' --> special int3 insn. */
+ if (i.tm.base_opcode == INT_OPCODE && i.op[0].imms->X_add_number == 3)
+ {
+ i.tm.base_opcode = INT3_OPCODE;
+ i.imm_operands = 0;
+ }
+
+ if ((i.tm.opcode_modifier.jump
+ || i.tm.opcode_modifier.jumpbyte
+ || i.tm.opcode_modifier.jumpdword)
+ && i.op[0].disps->X_op == O_constant)
+ {
+ /* Convert "jmp constant" (and "call constant") to a jump (call) to
+ the absolute address given by the constant. Since ix86 jumps and
+ calls are pc relative, we need to generate a reloc. */
+ i.op[0].disps->X_add_symbol = &abs_symbol;
+ i.op[0].disps->X_op = O_symbol;
+ }
+
+ if (i.tm.opcode_modifier.rex64)
+ i.rex |= REX_W;
+
+ /* For 8 bit registers we need an empty rex prefix. Also if the
+ instruction already has a prefix, we need to convert old
+ registers to new ones. */
+
+ if ((i.types[0].bitfield.reg8
+ && (i.op[0].regs->reg_flags & RegRex64) != 0)
+ || (i.types[1].bitfield.reg8
+ && (i.op[1].regs->reg_flags & RegRex64) != 0)
+ || ((i.types[0].bitfield.reg8
+ || i.types[1].bitfield.reg8)
+ && i.rex != 0))
+ {
+ int x;
+
+ i.rex |= REX_OPCODE;
+ for (x = 0; x < 2; x++)
+ {
+ /* Look for 8 bit operand that uses old registers. */
+ if (i.types[x].bitfield.reg8
+ && (i.op[x].regs->reg_flags & RegRex64) == 0)
{
- int op;
+ /* In case it is "hi" register, give up. */
+ if (i.op[x].regs->reg_num > 3)
+ as_bad (_("can't encode register '%s%s' in an "
+ "instruction requiring REX prefix."),
+ register_prefix, i.op[x].regs->reg_name);
- if (i.tm.base_opcode == 0xf20f38f1
- || i.tm.base_opcode == 0xf20f38f0)
- {
- /* We have to know the operand size for crc32. */
- as_bad (_("ambiguous memory operand size for `%s`"),
- i.tm.name);
- return 0;
- }
+ /* Otherwise it is equivalent to the extended register.
+ Since the encoding doesn't change this is merely
+ cosmetic cleanup for debug output. */
- for (op = i.operands; --op >= 0;)
- if ((i.types[op] & Reg)
- && !(i.tm.operand_types[op] & InOutPortReg))
- {
- i.suffix = ((i.types[op] & Reg8) ? BYTE_MNEM_SUFFIX :
- (i.types[op] & Reg16) ? WORD_MNEM_SUFFIX :
- (i.types[op] & Reg64) ? QWORD_MNEM_SUFFIX :
- LONG_MNEM_SUFFIX);
- break;
- }
+ i.op[x].regs = i.op[x].regs + 8;
}
}
- else if (i.suffix == BYTE_MNEM_SUFFIX)
+ }
+
+ if (i.rex != 0)
+ add_prefix (REX_OPCODE | i.rex);
+
+ /* We are ready to output the insn. */
+ output_insn ();
+}
+
+static char *
+parse_insn (char *line, char *mnemonic)
+{
+ char *l = line;
+ char *token_start = l;
+ char *mnem_p;
+ int supported;
+ const insn_template *t;
+ char *dot_p = NULL;
+
+ /* Non-zero if we found a prefix only acceptable with string insns. */
+ const char *expecting_string_instruction = NULL;
+
+ while (1)
+ {
+ mnem_p = mnemonic;
+ while ((*mnem_p = mnemonic_chars[(unsigned char) *l]) != 0)
{
- if (!check_byte_reg ())
- return 0;
+ if (*mnem_p == '.')
+ dot_p = mnem_p;
+ mnem_p++;
+ if (mnem_p >= mnemonic + MAX_MNEM_SIZE)
+ {
+ as_bad (_("no such instruction: `%s'"), token_start);
+ return NULL;
+ }
+ l++;
}
- else if (i.suffix == LONG_MNEM_SUFFIX)
+ if (!is_space_char (*l)
+ && *l != END_OF_INSN
+ && (intel_syntax
+ || (*l != PREFIX_SEPARATOR
+ && *l != ',')))
{
- if (!check_long_reg ())
- return 0;
+ as_bad (_("invalid character %s in mnemonic"),
+ output_invalid (*l));
+ return NULL;
}
- else if (i.suffix == QWORD_MNEM_SUFFIX)
+ if (token_start == l)
{
- if (!check_qword_reg ())
- return 0;
+ if (!intel_syntax && *l == PREFIX_SEPARATOR)
+ as_bad (_("expecting prefix; got nothing"));
+ else
+ as_bad (_("expecting mnemonic; got nothing"));
+ return NULL;
}
- else if (i.suffix == WORD_MNEM_SUFFIX)
+
+ /* Look up instruction (or prefix) via hash table. */
+ current_templates = (const templates *) hash_find (op_hash, mnemonic);
+
+ if (*l != END_OF_INSN
+ && (!is_space_char (*l) || l[1] != END_OF_INSN)
+ && current_templates
+ && current_templates->start->opcode_modifier.isprefix)
{
- if (!check_word_reg ())
- return 0;
+ if (!cpu_flags_check_cpu64 (current_templates->start->cpu_flags))
+ {
+ as_bad ((flag_code != CODE_64BIT
+ ? _("`%s' is only supported in 64-bit mode")
+ : _("`%s' is not supported in 64-bit mode")),
+ current_templates->start->name);
+ return NULL;
+ }
+ /* If we are in 16-bit mode, do not allow addr16 or data16.
+ Similarly, in 32-bit mode, do not allow addr32 or data32. */
+ if ((current_templates->start->opcode_modifier.size16
+ || current_templates->start->opcode_modifier.size32)
+ && flag_code != CODE_64BIT
+ && (current_templates->start->opcode_modifier.size32
+ ^ (flag_code == CODE_16BIT)))
+ {
+ as_bad (_("redundant %s prefix"),
+ current_templates->start->name);
+ return NULL;
+ }
+ /* Add prefix, checking for repeated prefixes. */
+ switch (add_prefix (current_templates->start->base_opcode))
+ {
+ case 0:
+ return NULL;
+ case 2:
+ expecting_string_instruction = current_templates->start->name;
+ break;
+ }
+ /* Skip past PREFIX_SEPARATOR and reset token_start. */
+ token_start = ++l;
}
- else if (intel_syntax && (i.tm.opcode_modifier & IgnoreSize))
- /* Do nothing if the instruction is going to ignore the prefix. */
- ;
else
- abort ();
+ break;
}
- else if ((i.tm.opcode_modifier & DefaultSize)
- && !i.suffix
- /* exclude fldenv/frstor/fsave/fstenv */
- && (i.tm.opcode_modifier & No_sSuf))
+
+ if (!current_templates)
{
- i.suffix = stackop_size;
+ /* Check if we should swap operand in encoding. */
+ if (mnem_p - 2 == dot_p && dot_p[1] == 's')
+ i.swap_operand = 1;
+ else
+ goto check_suffix;
+ mnem_p = dot_p;
+ *dot_p = '\0';
+ current_templates = (const templates *) hash_find (op_hash, mnemonic);
}
- else if (intel_syntax
- && !i.suffix
- && ((i.tm.operand_types[0] & JumpAbsolute)
- || (i.tm.opcode_modifier & (JumpByte|JumpInterSegment))
- || (i.tm.base_opcode == 0x0f01 /* [ls][gi]dt */
- && i.tm.extension_opcode <= 3)))
+
+ if (!current_templates)
{
- switch (flag_code)
+check_suffix:
+ /* See if we can get a match by trimming off a suffix. */
+ switch (mnem_p[-1])
{
- case CODE_64BIT:
- if (!(i.tm.opcode_modifier & No_qSuf))
+ case WORD_MNEM_SUFFIX:
+ if (intel_syntax && (intel_float_operand (mnemonic) & 2))
+ i.suffix = SHORT_MNEM_SUFFIX;
+ else
+ case BYTE_MNEM_SUFFIX:
+ case QWORD_MNEM_SUFFIX:
+ i.suffix = mnem_p[-1];
+ mnem_p[-1] = '\0';
+ current_templates = (const templates *) hash_find (op_hash,
+ mnemonic);
+ break;
+ case SHORT_MNEM_SUFFIX:
+ case LONG_MNEM_SUFFIX:
+ if (!intel_syntax)
{
- i.suffix = QWORD_MNEM_SUFFIX;
- break;
+ i.suffix = mnem_p[-1];
+ mnem_p[-1] = '\0';
+ current_templates = (const templates *) hash_find (op_hash,
+ mnemonic);
}
- case CODE_32BIT:
- if (!(i.tm.opcode_modifier & No_lSuf))
- i.suffix = LONG_MNEM_SUFFIX;
break;
- case CODE_16BIT:
- if (!(i.tm.opcode_modifier & No_wSuf))
- i.suffix = WORD_MNEM_SUFFIX;
+
+ /* Intel Syntax. */
+ case 'd':
+ if (intel_syntax)
+ {
+ if (intel_float_operand (mnemonic) == 1)
+ i.suffix = SHORT_MNEM_SUFFIX;
+ else
+ i.suffix = LONG_MNEM_SUFFIX;
+ mnem_p[-1] = '\0';
+ current_templates = (const templates *) hash_find (op_hash,
+ mnemonic);
+ }
break;
}
+ if (!current_templates)
+ {
+ as_bad (_("no such instruction: `%s'"), token_start);
+ return NULL;
+ }
}
- if (!i.suffix)
+ if (current_templates->start->opcode_modifier.jump
+ || current_templates->start->opcode_modifier.jumpbyte)
{
- if (!intel_syntax)
+ /* Check for a branch hint. We allow ",pt" and ",pn" for
+ predict taken and predict not taken respectively.
+ I'm not sure that branch hints actually do anything on loop
+ and jcxz insns (JumpByte) for current Pentium4 chips. They
+ may work in the future and it doesn't hurt to accept them
+ now. */
+ if (l[0] == ',' && l[1] == 'p')
{
- if (i.tm.opcode_modifier & W)
+ if (l[2] == 't')
{
- as_bad (_("no instruction mnemonic suffix given and "
- "no register operands; can't size instruction"));
- return 0;
+ if (!add_prefix (DS_PREFIX_OPCODE))
+ return NULL;
+ l += 3;
}
- }
- else
- {
- unsigned int suffixes = (~i.tm.opcode_modifier
- & (No_bSuf
- | No_wSuf
- | No_lSuf
- | No_sSuf
- | No_xSuf
- | No_qSuf));
-
- if ((i.tm.opcode_modifier & W)
- || ((suffixes & (suffixes - 1))
- && !(i.tm.opcode_modifier & (DefaultSize | IgnoreSize))))
+ else if (l[2] == 'n')
{
- as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
- return 0;
+ if (!add_prefix (CS_PREFIX_OPCODE))
+ return NULL;
+ l += 3;
}
}
}
+ /* Any other comma loses. */
+ if (*l == ',')
+ {
+ as_bad (_("invalid character %s in mnemonic"),
+ output_invalid (*l));
+ return NULL;
+ }
- /* Change the opcode based on the operand size given by i.suffix;
- We don't need to change things for byte insns. */
-
- if (i.suffix && i.suffix != BYTE_MNEM_SUFFIX)
+ /* Check if instruction is supported on specified architecture. */
+ supported = 0;
+ for (t = current_templates->start; t < current_templates->end; ++t)
{
- /* It's not a byte, select word/dword operation. */
- if (i.tm.opcode_modifier & W)
- {
- if (i.tm.opcode_modifier & ShortForm)
- i.tm.base_opcode |= 8;
- else
- i.tm.base_opcode |= 1;
- }
+ supported |= cpu_flags_match (t);
+ if (supported == CPU_FLAGS_PERFECT_MATCH)
+ goto skip;
+ }
- /* Now select between word & dword operations via the operand
- size prefix, except for instructions that will ignore this
- prefix anyway. */
- if (i.tm.base_opcode == 0x0f01 && i.tm.extension_opcode == 0xc8)
- {
- /* monitor in SSE3 is a very special case. The default size
- of AX is the size of mode. The address size override
- prefix will change the size of AX. */
- if (i.op->regs[0].reg_type &
- (flag_code == CODE_32BIT ? Reg16 : Reg32))
- if (!add_prefix (ADDR_PREFIX_OPCODE))
- return 0;
- }
- else if (i.suffix != QWORD_MNEM_SUFFIX
- && i.suffix != LONG_DOUBLE_MNEM_SUFFIX
- && !(i.tm.opcode_modifier & (IgnoreSize | FloatMF))
- && ((i.suffix == LONG_MNEM_SUFFIX) == (flag_code == CODE_16BIT)
- || (flag_code == CODE_64BIT
- && (i.tm.opcode_modifier & JumpByte))))
- {
- unsigned int prefix = DATA_PREFIX_OPCODE;
+ if (!(supported & CPU_FLAGS_64BIT_MATCH))
+ {
+ as_bad (flag_code == CODE_64BIT
+ ? _("`%s' is not supported in 64-bit mode")
+ : _("`%s' is only supported in 64-bit mode"),
+ current_templates->start->name);
+ return NULL;
+ }
+ if (supported != CPU_FLAGS_PERFECT_MATCH)
+ {
+ as_bad (_("`%s' is not supported on `%s%s'"),
+ current_templates->start->name,
+ cpu_arch_name ? cpu_arch_name : default_arch,
+ cpu_sub_arch_name ? cpu_sub_arch_name : "");
+ return NULL;
+ }
- if (i.tm.opcode_modifier & JumpByte) /* jcxz, loop */
- prefix = ADDR_PREFIX_OPCODE;
+skip:
+ if (!cpu_arch_flags.bitfield.cpui386
+ && (flag_code != CODE_16BIT))
+ {
+ as_warn (_("use .code16 to ensure correct addressing mode"));
+ }
- if (!add_prefix (prefix))
- return 0;
- }
+ /* Check for rep/repne without a string instruction. */
+ if (expecting_string_instruction)
+ {
+ static templates override;
- /* Set mode64 for an operand. */
- if (i.suffix == QWORD_MNEM_SUFFIX
- && flag_code == CODE_64BIT
- && (i.tm.opcode_modifier & NoRex64) == 0)
+ for (t = current_templates->start; t < current_templates->end; ++t)
+ if (t->opcode_modifier.isstring)
+ break;
+ if (t >= current_templates->end)
{
- /* Special case for xchg %rax,%rax. It is NOP and doesn't
- need rex64. */
- if (i.operands != 2
- || i.types [0] != (Acc | Reg64)
- || i.types [1] != (Acc | Reg64)
- || i.tm.base_opcode != 0x90)
- i.rex |= REX_W;
+ as_bad (_("expecting string instruction after `%s'"),
+ expecting_string_instruction);
+ return NULL;
}
-
- /* Size floating point instruction. */
- if (i.suffix == LONG_MNEM_SUFFIX)
- if (i.tm.opcode_modifier & FloatMF)
- i.tm.base_opcode ^= 4;
+ for (override.start = t; t < current_templates->end; ++t)
+ if (!t->opcode_modifier.isstring)
+ break;
+ override.end = t;
+ current_templates = &override;
}
- return 1;
+ return l;
}
-static int
-check_byte_reg (void)
+static char *
+parse_operands (char *l, const char *mnemonic)
{
- int op;
+ char *token_start;
- for (op = i.operands; --op >= 0;)
- {
- /* If this is an eight bit register, it's OK. If it's the 16 or
- 32 bit version of an eight bit register, we will just use the
- low portion, and that's OK too. */
- if (i.types[op] & Reg8)
- continue;
+ /* 1 if operand is pending after ','. */
+ unsigned int expecting_operand = 0;
- /* movzx, movsx, pextrb and pinsrb should not generate this
- warning. */
- if (intel_syntax
- && (i.tm.base_opcode == 0xfb7
- || i.tm.base_opcode == 0xfb6
- || i.tm.base_opcode == 0x63
- || i.tm.base_opcode == 0xfbe
- || i.tm.base_opcode == 0xfbf
- || i.tm.base_opcode == 0x660f3a14
- || i.tm.base_opcode == 0x660f3a20))
- continue;
+ /* Non-zero if operand parens not balanced. */
+ unsigned int paren_not_balanced;
- /* crc32 doesn't generate this warning. */
- if (i.tm.base_opcode == 0xf20f38f0)
- continue;
+ while (*l != END_OF_INSN)
+ {
+ /* Skip optional white space before operand. */
+ if (is_space_char (*l))
+ ++l;
+ if (!is_operand_char (*l) && *l != END_OF_INSN)
+ {
+ as_bad (_("invalid character %s before operand %d"),
+ output_invalid (*l),
+ i.operands + 1);
+ return NULL;
+ }
+ token_start = l; /* after white space */
+ paren_not_balanced = 0;
+ while (paren_not_balanced || *l != ',')
+ {
+ if (*l == END_OF_INSN)
+ {
+ if (paren_not_balanced)
+ {
+ if (!intel_syntax)
+ as_bad (_("unbalanced parenthesis in operand %d."),
+ i.operands + 1);
+ else
+ as_bad (_("unbalanced brackets in operand %d."),
+ i.operands + 1);
+ return NULL;
+ }
+ else
+ break; /* we are done */
+ }
+ else if (!is_operand_char (*l) && !is_space_char (*l))
+ {
+ as_bad (_("invalid character %s in operand %d"),
+ output_invalid (*l),
+ i.operands + 1);
+ return NULL;
+ }
+ if (!intel_syntax)
+ {
+ if (*l == '(')
+ ++paren_not_balanced;
+ if (*l == ')')
+ --paren_not_balanced;
+ }
+ else
+ {
+ if (*l == '[')
+ ++paren_not_balanced;
+ if (*l == ']')
+ --paren_not_balanced;
+ }
+ l++;
+ }
+ if (l != token_start)
+ { /* Yes, we've read in another operand. */
+ unsigned int operand_ok;
+ this_operand = i.operands++;
+ i.types[this_operand].bitfield.unspecified = 1;
+ if (i.operands > MAX_OPERANDS)
+ {
+ as_bad (_("spurious operands; (%d operands/instruction max)"),
+ MAX_OPERANDS);
+ return NULL;
+ }
+ /* Now parse operand adding info to 'i' as we go along. */
+ END_STRING_AND_SAVE (l);
+
+ if (intel_syntax)
+ operand_ok =
+ i386_intel_operand (token_start,
+ intel_float_operand (mnemonic));
+ else
+ operand_ok = i386_att_operand (token_start);
- if ((i.types[op] & WordReg) && i.op[op].regs->reg_num < 4)
+ RESTORE_END_STRING (l);
+ if (!operand_ok)
+ return NULL;
+ }
+ else
{
- /* Prohibit these changes in the 64bit mode, since the
- lowering is more complicated. */
- if (flag_code == CODE_64BIT
- && (i.tm.operand_types[op] & InOutPortReg) == 0)
+ if (expecting_operand)
{
- as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
- register_prefix, i.op[op].regs->reg_name,
- i.suffix);
- return 0;
+ expecting_operand_after_comma:
+ as_bad (_("expecting operand after ','; got nothing"));
+ return NULL;
+ }
+ if (*l == ',')
+ {
+ as_bad (_("expecting operand before ','; got nothing"));
+ return NULL;
}
-#if REGISTER_WARNINGS
- if (!quiet_warnings
- && (i.tm.operand_types[op] & InOutPortReg) == 0)
- as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
- register_prefix,
- (i.op[op].regs + (i.types[op] & Reg16
- ? REGNAM_AL - REGNAM_AX
- : REGNAM_AL - REGNAM_EAX))->reg_name,
- register_prefix,
- i.op[op].regs->reg_name,
- i.suffix);
-#endif
- continue;
}
- /* Any other register is bad. */
- if (i.types[op] & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test
- | FloatReg | FloatAcc))
+
+ /* Now *l must be either ',' or END_OF_INSN. */
+ if (*l == ',')
{
- as_bad (_("`%s%s' not allowed with `%s%c'"),
- register_prefix,
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return 0;
+ if (*++l == END_OF_INSN)
+ {
+ /* Just skip it, if it's \n complain. */
+ goto expecting_operand_after_comma;
+ }
+ expecting_operand = 1;
}
}
- return 1;
+ return l;
}
-static int
-check_long_reg (void)
+static void
+swap_2_operands (int xchg1, int xchg2)
{
- int op;
+ union i386_op temp_op;
+ i386_operand_type temp_type;
+ enum bfd_reloc_code_real temp_reloc;
- for (op = i.operands; --op >= 0;)
- /* Reject eight bit registers, except where the template requires
- them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
- {
- as_bad (_("`%s%s' not allowed with `%s%c'"),
- register_prefix,
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return 0;
- }
- /* Warn if the e prefix on a general reg is missing. */
- else if ((!quiet_warnings || flag_code == CODE_64BIT)
- && (i.types[op] & Reg16) != 0
- && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
- {
- /* Prohibit these changes in the 64bit mode, since the
- lowering is more complicated. */
- if (flag_code == CODE_64BIT)
- {
- as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
- register_prefix, i.op[op].regs->reg_name,
- i.suffix);
- return 0;
- }
-#if REGISTER_WARNINGS
- else
- as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
- register_prefix,
- (i.op[op].regs + REGNAM_EAX - REGNAM_AX)->reg_name,
- register_prefix,
- i.op[op].regs->reg_name,
- i.suffix);
-#endif
- }
- /* Warn if the r prefix on a general reg is missing. */
- else if ((i.types[op] & Reg64) != 0
- && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
- {
- if (intel_syntax
- && i.tm.base_opcode == 0xf30f2d
- && (i.types[0] & RegXMM) == 0)
- {
- /* cvtss2si converts DWORD memory to Reg64. We want
- REX byte. */
- i.suffix = QWORD_MNEM_SUFFIX;
- }
- else
- {
- as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
- register_prefix, i.op[op].regs->reg_name,
- i.suffix);
- return 0;
- }
- }
- return 1;
+ temp_type = i.types[xchg2];
+ i.types[xchg2] = i.types[xchg1];
+ i.types[xchg1] = temp_type;
+ temp_op = i.op[xchg2];
+ i.op[xchg2] = i.op[xchg1];
+ i.op[xchg1] = temp_op;
+ temp_reloc = i.reloc[xchg2];
+ i.reloc[xchg2] = i.reloc[xchg1];
+ i.reloc[xchg1] = temp_reloc;
}
-static int
-check_qword_reg (void)
+static void
+swap_operands (void)
+{
+ switch (i.operands)
+ {
+ case 5:
+ case 4:
+ swap_2_operands (1, i.operands - 2);
+ case 3:
+ case 2:
+ swap_2_operands (0, i.operands - 1);
+ break;
+ default:
+ abort ();
+ }
+
+ if (i.mem_operands == 2)
+ {
+ const seg_entry *temp_seg;
+ temp_seg = i.seg[0];
+ i.seg[0] = i.seg[1];
+ i.seg[1] = temp_seg;
+ }
+}
+
+/* Try to ensure constant immediates are represented in the smallest
+ opcode possible. */
+static void
+optimize_imm (void)
{
+ char guess_suffix = 0;
int op;
- for (op = i.operands; --op >= 0; )
- /* Reject eight bit registers, except where the template requires
- them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
- {
- as_bad (_("`%s%s' not allowed with `%s%c'"),
- register_prefix,
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return 0;
- }
- /* Warn if the e prefix on a general reg is missing. */
- else if ((i.types[op] & (Reg16 | Reg32)) != 0
- && (i.tm.operand_types[op] & (Reg32 | Acc)) != 0)
- {
- /* Prohibit these changes in the 64bit mode, since the
- lowering is more complicated. */
- if (intel_syntax
- && i.tm.base_opcode == 0xf20f2d
- && (i.types[0] & RegXMM) == 0)
+ if (i.suffix)
+ guess_suffix = i.suffix;
+ else if (i.reg_operands)
+ {
+ /* Figure out a suffix from the last register operand specified.
+ We can't do this properly yet, ie. excluding InOutPortReg,
+ but the following works for instructions with immediates.
+ In any case, we can't set i.suffix yet. */
+ for (op = i.operands; --op >= 0;)
+ if (i.types[op].bitfield.reg8)
{
- /* cvtsd2si converts QWORD memory to Reg32. We don't want
- REX byte. */
- i.suffix = LONG_MNEM_SUFFIX;
+ guess_suffix = BYTE_MNEM_SUFFIX;
+ break;
}
- else
+ else if (i.types[op].bitfield.reg16)
{
- as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
- register_prefix, i.op[op].regs->reg_name,
- i.suffix);
- return 0;
+ guess_suffix = WORD_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg32)
+ {
+ guess_suffix = LONG_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg64)
+ {
+ guess_suffix = QWORD_MNEM_SUFFIX;
+ break;
+ }
+ }
+ else if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
+ guess_suffix = WORD_MNEM_SUFFIX;
+
+ for (op = i.operands; --op >= 0;)
+ if (operand_type_check (i.types[op], imm))
+ {
+ switch (i.op[op].imms->X_op)
+ {
+ case O_constant:
+ /* If a suffix is given, this operand may be shortened. */
+ switch (guess_suffix)
+ {
+ case LONG_MNEM_SUFFIX:
+ i.types[op].bitfield.imm32 = 1;
+ i.types[op].bitfield.imm64 = 1;
+ break;
+ case WORD_MNEM_SUFFIX:
+ i.types[op].bitfield.imm16 = 1;
+ i.types[op].bitfield.imm32 = 1;
+ i.types[op].bitfield.imm32s = 1;
+ i.types[op].bitfield.imm64 = 1;
+ break;
+ case BYTE_MNEM_SUFFIX:
+ i.types[op].bitfield.imm8 = 1;
+ i.types[op].bitfield.imm8s = 1;
+ i.types[op].bitfield.imm16 = 1;
+ i.types[op].bitfield.imm32 = 1;
+ i.types[op].bitfield.imm32s = 1;
+ i.types[op].bitfield.imm64 = 1;
+ break;
+ }
+
+ /* If this operand is at most 16 bits, convert it
+ to a signed 16 bit number before trying to see
+ whether it will fit in an even smaller size.
+ This allows a 16-bit operand such as $0xffe0 to
+ be recognised as within Imm8S range. */
+ if ((i.types[op].bitfield.imm16)
+ && (i.op[op].imms->X_add_number & ~(offsetT) 0xffff) == 0)
+ {
+ i.op[op].imms->X_add_number =
+ (((i.op[op].imms->X_add_number & 0xffff) ^ 0x8000) - 0x8000);
+ }
+ if ((i.types[op].bitfield.imm32)
+ && ((i.op[op].imms->X_add_number & ~(((offsetT) 2 << 31) - 1))
+ == 0))
+ {
+ i.op[op].imms->X_add_number = ((i.op[op].imms->X_add_number
+ ^ ((offsetT) 1 << 31))
+ - ((offsetT) 1 << 31));
+ }
+ i.types[op]
+ = operand_type_or (i.types[op],
+ smallest_imm_type (i.op[op].imms->X_add_number));
+
+ /* We must avoid matching of Imm32 templates when 64bit
+ only immediate is available. */
+ if (guess_suffix == QWORD_MNEM_SUFFIX)
+ i.types[op].bitfield.imm32 = 0;
+ break;
+
+ case O_absent:
+ case O_register:
+ abort ();
+
+ /* Symbols and expressions. */
+ default:
+ /* Convert symbolic operand to proper sizes for matching, but don't
+ prevent matching a set of insns that only supports sizes other
+ than those matching the insn suffix. */
+ {
+ i386_operand_type mask, allowed;
+ const insn_template *t;
+
+ operand_type_set (&mask, 0);
+ operand_type_set (&allowed, 0);
+
+ for (t = current_templates->start;
+ t < current_templates->end;
+ ++t)
+ allowed = operand_type_or (allowed,
+ t->operand_types[op]);
+ switch (guess_suffix)
+ {
+ case QWORD_MNEM_SUFFIX:
+ mask.bitfield.imm64 = 1;
+ mask.bitfield.imm32s = 1;
+ break;
+ case LONG_MNEM_SUFFIX:
+ mask.bitfield.imm32 = 1;
+ break;
+ case WORD_MNEM_SUFFIX:
+ mask.bitfield.imm16 = 1;
+ break;
+ case BYTE_MNEM_SUFFIX:
+ mask.bitfield.imm8 = 1;
+ break;
+ default:
+ break;
+ }
+ allowed = operand_type_and (mask, allowed);
+ if (!operand_type_all_zero (&allowed))
+ i.types[op] = operand_type_and (i.types[op], mask);
+ }
+ break;
}
}
- return 1;
}
-static int
-check_word_reg (void)
+/* Try to use the smallest displacement type too. */
+static void
+optimize_disp (void)
{
int op;
+
for (op = i.operands; --op >= 0;)
- /* Reject eight bit registers, except where the template requires
- them. (eg. movzb) */
- if ((i.types[op] & Reg8) != 0
- && (i.tm.operand_types[op] & (Reg16 | Reg32 | Acc)) != 0)
- {
- as_bad (_("`%s%s' not allowed with `%s%c'"),
- register_prefix,
- i.op[op].regs->reg_name,
- i.tm.name,
- i.suffix);
- return 0;
- }
- /* Warn if the e prefix on a general reg is present. */
- else if ((!quiet_warnings || flag_code == CODE_64BIT)
- && (i.types[op] & Reg32) != 0
- && (i.tm.operand_types[op] & (Reg16 | Acc)) != 0)
+ if (operand_type_check (i.types[op], disp))
{
- /* Prohibit these changes in the 64bit mode, since the
- lowering is more complicated. */
- if (flag_code == CODE_64BIT)
+ if (i.op[op].disps->X_op == O_constant)
{
- as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
- register_prefix, i.op[op].regs->reg_name,
- i.suffix);
- return 0;
+ offsetT disp = i.op[op].disps->X_add_number;
+
+ if (i.types[op].bitfield.disp16
+ && (disp & ~(offsetT) 0xffff) == 0)
+ {
+ /* If this operand is at most 16 bits, convert
+ to a signed 16 bit number and don't use 64bit
+ displacement. */
+ disp = (((disp & 0xffff) ^ 0x8000) - 0x8000);
+ i.types[op].bitfield.disp64 = 0;
+ }
+ if (i.types[op].bitfield.disp32
+ && (disp & ~(((offsetT) 2 << 31) - 1)) == 0)
+ {
+ /* If this operand is at most 32 bits, convert
+ to a signed 32 bit number and don't use 64bit
+ displacement. */
+ disp &= (((offsetT) 2 << 31) - 1);
+ disp = (disp ^ ((offsetT) 1 << 31)) - ((addressT) 1 << 31);
+ i.types[op].bitfield.disp64 = 0;
+ }
+ if (!disp && i.types[op].bitfield.baseindex)
+ {
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 0;
+ i.types[op].bitfield.disp64 = 0;
+ i.op[op].disps = 0;
+ i.disp_operands--;
+ }
+ else if (flag_code == CODE_64BIT)
+ {
+ if (fits_in_signed_long (disp))
+ {
+ i.types[op].bitfield.disp64 = 0;
+ i.types[op].bitfield.disp32s = 1;
+ }
+ if (fits_in_unsigned_long (disp))
+ i.types[op].bitfield.disp32 = 1;
+ }
+ if ((i.types[op].bitfield.disp32
+ || i.types[op].bitfield.disp32s
+ || i.types[op].bitfield.disp16)
+ && fits_in_signed_byte (disp))
+ i.types[op].bitfield.disp8 = 1;
}
- else
-#if REGISTER_WARNINGS
- as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
- register_prefix,
- (i.op[op].regs + REGNAM_AX - REGNAM_EAX)->reg_name,
- register_prefix,
- i.op[op].regs->reg_name,
- i.suffix);
-#endif
+ else if (i.reloc[op] == BFD_RELOC_386_TLS_DESC_CALL
+ || i.reloc[op] == BFD_RELOC_X86_64_TLSDESC_CALL)
+ {
+ fix_new_exp (frag_now, frag_more (0) - frag_now->fr_literal, 0,
+ i.op[op].disps, 0, i.reloc[op]);
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 0;
+ i.types[op].bitfield.disp64 = 0;
+ }
+ else
+ /* We only support 64bit displacement on constants. */
+ i.types[op].bitfield.disp64 = 0;
}
- return 1;
}
-static int
-finalize_imm (void)
+static const insn_template *
+match_template (void)
{
- unsigned int overlap0, overlap1, overlap2;
+ /* Points to template once we've found it. */
+ const insn_template *t;
+ i386_operand_type overlap0, overlap1, overlap2, overlap3;
+ i386_operand_type overlap4;
+ unsigned int found_reverse_match;
+ i386_opcode_modifier suffix_check;
+ i386_operand_type operand_types [MAX_OPERANDS];
+ int addr_prefix_disp;
+ unsigned int j;
+ unsigned int found_cpu_match;
+ unsigned int check_register;
+
+#if MAX_OPERANDS != 5
+# error "MAX_OPERANDS must be 5."
+#endif
+
+ found_reverse_match = 0;
+ addr_prefix_disp = -1;
- overlap0 = i.types[0] & i.tm.operand_types[0];
- if ((overlap0 & (Imm8 | Imm8S | Imm16 | Imm32 | Imm32S | Imm64))
- && overlap0 != Imm8 && overlap0 != Imm8S
- && overlap0 != Imm16 && overlap0 != Imm32S
- && overlap0 != Imm32 && overlap0 != Imm64)
+ memset (&suffix_check, 0, sizeof (suffix_check));
+ if (i.suffix == BYTE_MNEM_SUFFIX)
+ suffix_check.no_bsuf = 1;
+ else if (i.suffix == WORD_MNEM_SUFFIX)
+ suffix_check.no_wsuf = 1;
+ else if (i.suffix == SHORT_MNEM_SUFFIX)
+ suffix_check.no_ssuf = 1;
+ else if (i.suffix == LONG_MNEM_SUFFIX)
+ suffix_check.no_lsuf = 1;
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ suffix_check.no_qsuf = 1;
+ else if (i.suffix == LONG_DOUBLE_MNEM_SUFFIX)
+ suffix_check.no_ldsuf = 1;
+
+ for (t = current_templates->start; t < current_templates->end; t++)
{
- if (i.suffix)
- {
- overlap0 &= (i.suffix == BYTE_MNEM_SUFFIX
- ? Imm8 | Imm8S
- : (i.suffix == WORD_MNEM_SUFFIX
- ? Imm16
- : (i.suffix == QWORD_MNEM_SUFFIX
- ? Imm64 | Imm32S
- : Imm32)));
- }
- else if (overlap0 == (Imm16 | Imm32S | Imm32)
- || overlap0 == (Imm16 | Imm32)
- || overlap0 == (Imm16 | Imm32S))
- {
- overlap0 = ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)
- ? Imm16 : Imm32S);
- }
- if (overlap0 != Imm8 && overlap0 != Imm8S
- && overlap0 != Imm16 && overlap0 != Imm32S
- && overlap0 != Imm32 && overlap0 != Imm64)
- {
- as_bad (_("no instruction mnemonic suffix given; "
- "can't determine immediate size"));
- return 0;
- }
- }
- i.types[0] = overlap0;
+ addr_prefix_disp = -1;
- overlap1 = i.types[1] & i.tm.operand_types[1];
- if ((overlap1 & (Imm8 | Imm8S | Imm16 | Imm32S | Imm32 | Imm64))
- && overlap1 != Imm8 && overlap1 != Imm8S
- && overlap1 != Imm16 && overlap1 != Imm32S
- && overlap1 != Imm32 && overlap1 != Imm64)
- {
- if (i.suffix)
- {
- overlap1 &= (i.suffix == BYTE_MNEM_SUFFIX
- ? Imm8 | Imm8S
- : (i.suffix == WORD_MNEM_SUFFIX
- ? Imm16
- : (i.suffix == QWORD_MNEM_SUFFIX
- ? Imm64 | Imm32S
- : Imm32)));
- }
- else if (overlap1 == (Imm16 | Imm32 | Imm32S)
- || overlap1 == (Imm16 | Imm32)
- || overlap1 == (Imm16 | Imm32S))
- {
- overlap1 = ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0)
- ? Imm16 : Imm32S);
- }
- if (overlap1 != Imm8 && overlap1 != Imm8S
- && overlap1 != Imm16 && overlap1 != Imm32S
- && overlap1 != Imm32 && overlap1 != Imm64)
- {
- as_bad (_("no instruction mnemonic suffix given; "
- "can't determine immediate size %x %c"),
- overlap1, i.suffix);
- return 0;
- }
- }
- i.types[1] = overlap1;
+ /* Must have right number of operands. */
+ if (i.operands != t->operands)
+ continue;
- overlap2 = i.types[2] & i.tm.operand_types[2];
- assert ((overlap2 & Imm) == 0);
- i.types[2] = overlap2;
+ /* Check processor support. */
+ found_cpu_match = (cpu_flags_match (t)
+ == CPU_FLAGS_PERFECT_MATCH);
+ if (!found_cpu_match)
+ continue;
- return 1;
-}
+ /* Check old gcc support. */
+ if (!old_gcc && t->opcode_modifier.oldgcc)
+ continue;
-static int
-process_operands (void)
-{
- /* Default segment register this instruction will use for memory
- accesses. 0 means unknown. This is only for optimizing out
- unnecessary segment overrides. */
- const seg_entry *default_seg = 0;
+ /* Check AT&T mnemonic. */
+ if (intel_mnemonic && t->opcode_modifier.attmnemonic)
+ continue;
+
+ /* Check AT&T syntax Intel syntax. */
+ if ((intel_syntax && t->opcode_modifier.attsyntax)
+ || (!intel_syntax && t->opcode_modifier.intelsyntax))
+ continue;
+
+ /* Check the suffix, except for some instructions in intel mode. */
+ if ((!intel_syntax || !t->opcode_modifier.ignoresize)
+ && ((t->opcode_modifier.no_bsuf && suffix_check.no_bsuf)
+ || (t->opcode_modifier.no_wsuf && suffix_check.no_wsuf)
+ || (t->opcode_modifier.no_lsuf && suffix_check.no_lsuf)
+ || (t->opcode_modifier.no_ssuf && suffix_check.no_ssuf)
+ || (t->opcode_modifier.no_qsuf && suffix_check.no_qsuf)
+ || (t->opcode_modifier.no_ldsuf && suffix_check.no_ldsuf)))
+ continue;
+
+ if (!operand_size_match (t))
+ continue;
+
+ for (j = 0; j < MAX_OPERANDS; j++)
+ operand_types[j] = t->operand_types[j];
+
+ /* In general, don't allow 64-bit operands in 32-bit mode. */
+ if (i.suffix == QWORD_MNEM_SUFFIX
+ && flag_code != CODE_64BIT
+ && (intel_syntax
+ ? (!t->opcode_modifier.ignoresize
+ && !intel_float_operand (t->name))
+ : intel_float_operand (t->name) != 2)
+ && ((!operand_types[0].bitfield.regmmx
+ && !operand_types[0].bitfield.regxmm
+ && !operand_types[0].bitfield.regymm)
+ || (!operand_types[t->operands > 1].bitfield.regmmx
+ && !!operand_types[t->operands > 1].bitfield.regxmm
+ && !!operand_types[t->operands > 1].bitfield.regymm))
+ && (t->base_opcode != 0x0fc7
+ || t->extension_opcode != 1 /* cmpxchg8b */))
+ continue;
+
+ /* In general, don't allow 32-bit operands on pre-386. */
+ else if (i.suffix == LONG_MNEM_SUFFIX
+ && !cpu_arch_flags.bitfield.cpui386
+ && (intel_syntax
+ ? (!t->opcode_modifier.ignoresize
+ && !intel_float_operand (t->name))
+ : intel_float_operand (t->name) != 2)
+ && ((!operand_types[0].bitfield.regmmx
+ && !operand_types[0].bitfield.regxmm)
+ || (!operand_types[t->operands > 1].bitfield.regmmx
+ && !!operand_types[t->operands > 1].bitfield.regxmm)))
+ continue;
- /* The imul $imm, %reg instruction is converted into
- imul $imm, %reg, %reg, and the clr %reg instruction
- is converted into xor %reg, %reg. */
- if (i.tm.opcode_modifier & RegKludge)
- {
- if ((i.tm.cpu_flags & CpuSSE4_1))
- {
- /* The first operand in instruction blendvpd, blendvps and
- pblendvb in SSE4.1 is implicit and must be xmm0. */
- assert (i.operands == 3
- && i.reg_operands >= 2
- && i.types[0] == RegXMM);
- if (i.op[0].regs->reg_num != 0)
- {
- if (intel_syntax)
- as_bad (_("the last operand of `%s' must be `%sxmm0'"),
- i.tm.name, register_prefix);
- else
- as_bad (_("the first operand of `%s' must be `%sxmm0'"),
- i.tm.name, register_prefix);
- return 0;
- }
- i.op[0] = i.op[1];
- i.op[1] = i.op[2];
- i.types[0] = i.types[1];
- i.types[1] = i.types[2];
- i.operands--;
- i.reg_operands--;
-
- /* We need to adjust fields in i.tm since they are used by
- build_modrm_byte. */
- i.tm.operand_types [0] = i.tm.operand_types [1];
- i.tm.operand_types [1] = i.tm.operand_types [2];
- i.tm.operands--;
- }
- else
- {
- unsigned int first_reg_op = (i.types[0] & Reg) ? 0 : 1;
- /* Pretend we saw the extra register operand. */
- assert (i.reg_operands == 1
- && i.op[first_reg_op + 1].regs == 0);
- i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
- i.types[first_reg_op + 1] = i.types[first_reg_op];
- i.operands++;
- i.reg_operands++;
- }
- }
-
- if (i.tm.opcode_modifier & ShortForm)
- {
- if (i.types[0] & (SReg2 | SReg3))
+ /* Do not verify operands when there are none. */
+ else
{
- if (i.tm.base_opcode == POP_SEG_SHORT
- && i.op[0].regs->reg_num == 1)
+ if (!t->operands)
+ /* We've found a match; break out of loop. */
+ break;
+ }
+
+ /* Address size prefix will turn Disp64/Disp32/Disp16 operand
+ into Disp32/Disp16/Disp32 operand. */
+ if (i.prefix[ADDR_PREFIX] != 0)
+ {
+ /* There should be only one Disp operand. */
+ switch (flag_code)
{
- as_bad (_("you can't `pop %%cs'"));
- return 0;
+ case CODE_16BIT:
+ for (j = 0; j < MAX_OPERANDS; j++)
+ {
+ if (operand_types[j].bitfield.disp16)
+ {
+ addr_prefix_disp = j;
+ operand_types[j].bitfield.disp32 = 1;
+ operand_types[j].bitfield.disp16 = 0;
+ break;
+ }
+ }
+ break;
+ case CODE_32BIT:
+ for (j = 0; j < MAX_OPERANDS; j++)
+ {
+ if (operand_types[j].bitfield.disp32)
+ {
+ addr_prefix_disp = j;
+ operand_types[j].bitfield.disp32 = 0;
+ operand_types[j].bitfield.disp16 = 1;
+ break;
+ }
+ }
+ break;
+ case CODE_64BIT:
+ for (j = 0; j < MAX_OPERANDS; j++)
+ {
+ if (operand_types[j].bitfield.disp64)
+ {
+ addr_prefix_disp = j;
+ operand_types[j].bitfield.disp64 = 0;
+ operand_types[j].bitfield.disp32 = 1;
+ break;
+ }
+ }
+ break;
}
- i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
- if ((i.op[0].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- }
- else
+ }
+
+ /* We check register size only if size of operands can be
+ encoded the canonical way. */
+ check_register = t->opcode_modifier.w;
+ overlap0 = operand_type_and (i.types[0], operand_types[0]);
+ switch (t->operands)
{
- /* The register or float register operand is in operand 0 or 1. */
- unsigned int op = (i.types[0] & (Reg | FloatReg)) ? 0 : 1;
- /* Register goes in low 3 bits of opcode. */
- i.tm.base_opcode |= i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- if (!quiet_warnings && (i.tm.opcode_modifier & Ugh) != 0)
+ case 1:
+ if (!operand_type_match (overlap0, i.types[0]))
+ continue;
+ break;
+ case 2:
+ /* xchg %eax, %eax is a special case. It is an aliase for nop
+ only in 32bit mode and we can use opcode 0x90. In 64bit
+ mode, we can't use 0x90 for xchg %eax, %eax since it should
+ zero-extend %eax to %rax. */
+ if (flag_code == CODE_64BIT
+ && t->base_opcode == 0x90
+ && operand_type_equal (&i.types [0], &acc32)
+ && operand_type_equal (&i.types [1], &acc32))
+ continue;
+ if (i.swap_operand)
{
- /* Warn about some common errors, but press on regardless.
- The first case can be generated by gcc (<= 2.8.1). */
- if (i.operands == 2)
+ /* If we swap operand in encoding, we either match
+ the next one or reverse direction of operands. */
+ if (t->opcode_modifier.s)
+ continue;
+ else if (t->opcode_modifier.d)
+ goto check_reverse;
+ }
+
+ case 3:
+ /* If we swap operand in encoding, we match the next one. */
+ if (i.swap_operand && t->opcode_modifier.s)
+ continue;
+ case 4:
+ case 5:
+ overlap1 = operand_type_and (i.types[1], operand_types[1]);
+ if (!operand_type_match (overlap0, i.types[0])
+ || !operand_type_match (overlap1, i.types[1])
+ || (check_register
+ && !operand_type_register_match (overlap0, i.types[0],
+ operand_types[0],
+ overlap1, i.types[1],
+ operand_types[1])))
+ {
+ /* Check if other direction is valid ... */
+ if (!t->opcode_modifier.d && !t->opcode_modifier.floatd)
+ continue;
+
+check_reverse:
+ /* Try reversing direction of operands. */
+ overlap0 = operand_type_and (i.types[0], operand_types[1]);
+ overlap1 = operand_type_and (i.types[1], operand_types[0]);
+ if (!operand_type_match (overlap0, i.types[0])
+ || !operand_type_match (overlap1, i.types[1])
+ || (check_register
+ && !operand_type_register_match (overlap0,
+ i.types[0],
+ operand_types[1],
+ overlap1,
+ i.types[1],
+ operand_types[0])))
{
- /* Reversed arguments on faddp, fsubp, etc. */
- as_warn (_("translating to `%s %s%s,%s%s'"), i.tm.name,
- register_prefix, i.op[1].regs->reg_name,
- register_prefix, i.op[0].regs->reg_name);
+ /* Does not match either direction. */
+ continue;
}
+ /* found_reverse_match holds which of D or FloatDR
+ we've found. */
+ if (t->opcode_modifier.d)
+ found_reverse_match = Opcode_D;
+ else if (t->opcode_modifier.floatd)
+ found_reverse_match = Opcode_FloatD;
else
+ found_reverse_match = 0;
+ if (t->opcode_modifier.floatr)
+ found_reverse_match |= Opcode_FloatR;
+ }
+ else
+ {
+ /* Found a forward 2 operand match here. */
+ switch (t->operands)
{
- /* Extraneous `l' suffix on fp insn. */
- as_warn (_("translating to `%s %s%s'"), i.tm.name,
- register_prefix, i.op[0].regs->reg_name);
+ case 5:
+ overlap4 = operand_type_and (i.types[4],
+ operand_types[4]);
+ case 4:
+ overlap3 = operand_type_and (i.types[3],
+ operand_types[3]);
+ case 3:
+ overlap2 = operand_type_and (i.types[2],
+ operand_types[2]);
+ break;
+ }
+
+ switch (t->operands)
+ {
+ case 5:
+ if (!operand_type_match (overlap4, i.types[4])
+ || !operand_type_register_match (overlap3,
+ i.types[3],
+ operand_types[3],
+ overlap4,
+ i.types[4],
+ operand_types[4]))
+ continue;
+ case 4:
+ if (!operand_type_match (overlap3, i.types[3])
+ || (check_register
+ && !operand_type_register_match (overlap2,
+ i.types[2],
+ operand_types[2],
+ overlap3,
+ i.types[3],
+ operand_types[3])))
+ continue;
+ case 3:
+ /* Here we make use of the fact that there are no
+ reverse match 3 operand instructions, and all 3
+ operand instructions only need to be checked for
+ register consistency between operands 2 and 3. */
+ if (!operand_type_match (overlap2, i.types[2])
+ || (check_register
+ && !operand_type_register_match (overlap1,
+ i.types[1],
+ operand_types[1],
+ overlap2,
+ i.types[2],
+ operand_types[2])))
+ continue;
+ break;
}
}
+ /* Found either forward/reverse 2, 3 or 4 operand match here:
+ slip through to break. */
+ }
+ if (!found_cpu_match)
+ {
+ found_reverse_match = 0;
+ continue;
}
- }
- else if (i.tm.opcode_modifier & Modrm)
- {
- /* The opcode is completed (modulo i.tm.extension_opcode which
- must be put into the modrm byte). Now, we make the modrm and
- index base bytes based on all the info we've collected. */
- default_seg = build_modrm_byte ();
+ /* We've found a match; break out of loop. */
+ break;
}
- else if ((i.tm.base_opcode & ~0x3) == MOV_AX_DISP32)
+
+ if (t == current_templates->end)
{
- default_seg = &ds;
+ /* We found no match. */
+ if (intel_syntax)
+ as_bad (_("ambiguous operand size or operands invalid for `%s'"),
+ current_templates->start->name);
+ else
+ as_bad (_("suffix or operands invalid for `%s'"),
+ current_templates->start->name);
+ return NULL;
}
- else if ((i.tm.opcode_modifier & IsString) != 0)
+
+ if (!quiet_warnings)
{
- /* For the string instructions that allow a segment override
- on one of their operands, the default segment is ds. */
- default_seg = &ds;
+ if (!intel_syntax
+ && (i.types[0].bitfield.jumpabsolute
+ != operand_types[0].bitfield.jumpabsolute))
+ {
+ as_warn (_("indirect %s without `*'"), t->name);
+ }
+
+ if (t->opcode_modifier.isprefix
+ && t->opcode_modifier.ignoresize)
+ {
+ /* Warn them that a data or address size prefix doesn't
+ affect assembly of the next line of code. */
+ as_warn (_("stand-alone `%s' prefix"), t->name);
+ }
}
- if ((i.tm.base_opcode == 0x8d /* lea */
- || (i.tm.cpu_flags & CpuSVME))
- && i.seg[0] && !quiet_warnings)
- as_warn (_("segment override on `%s' is ineffectual"), i.tm.name);
+ /* Copy the template we found. */
+ i.tm = *t;
- /* If a segment was explicitly specified, and the specified segment
- is not the default, use an opcode prefix to select it. If we
- never figured out what the default segment is, then default_seg
- will be zero at this point, and the specified segment prefix will
- always be used. */
- if ((i.seg[0]) && (i.seg[0] != default_seg))
+ if (addr_prefix_disp != -1)
+ i.tm.operand_types[addr_prefix_disp]
+ = operand_types[addr_prefix_disp];
+
+ if (found_reverse_match)
{
- if (!add_prefix (i.seg[0]->seg_prefix))
- return 0;
+ /* If we found a reverse match we must alter the opcode
+ direction bit. found_reverse_match holds bits to change
+ (different for int & float insns). */
+
+ i.tm.base_opcode ^= found_reverse_match;
+
+ i.tm.operand_types[0] = operand_types[1];
+ i.tm.operand_types[1] = operand_types[0];
}
- return 1;
+
+ return t;
}
-static const seg_entry *
-build_modrm_byte (void)
+static int
+check_string (void)
{
- const seg_entry *default_seg = 0;
-
- /* i.reg_operands MUST be the number of real register operands;
- implicit registers do not count. */
- if (i.reg_operands == 2)
+ int mem_op = operand_type_check (i.types[0], anymem) ? 0 : 1;
+ if (i.tm.operand_types[mem_op].bitfield.esseg)
{
- unsigned int source, dest;
-
- switch (i.operands)
+ if (i.seg[0] != NULL && i.seg[0] != &es)
{
- case 2:
- source = 0;
- break;
- case 3:
- /* When there are 3 operands, one of them may be immediate,
- which may be the first or the last operand. Otherwise,
- the first operand must be shift count register (cl). */
- assert (i.imm_operands == 1
- || (i.imm_operands == 0
- && (i.types[0] & ShiftCount)));
- source = (i.types[0] & (Imm | ShiftCount)) ? 1 : 0;
- break;
- case 4:
- /* When there are 4 operands, the first two must be immediate
- operands. The source operand will be the 3rd one. */
- assert (i.imm_operands == 2
- && (i.types[0] & Imm)
- && (i.types[1] & Imm));
- source = 2;
- break;
- default:
- abort ();
+ as_bad (_("`%s' operand %d must use `%ses' segment"),
+ i.tm.name,
+ mem_op + 1,
+ register_prefix);
+ return 0;
}
-
- dest = source + 1;
-
- i.rm.mode = 3;
- /* One of the register operands will be encoded in the i.tm.reg
- field, the other in the combined i.tm.mode and i.tm.regmem
- fields. If no form of this instruction supports a memory
- destination operand, then we assume the source operand may
- sometimes be a memory operand and so we need to store the
- destination in the i.rm.reg field. */
- if ((i.tm.operand_types[dest] & (AnyMem | RegMem)) == 0)
- {
- i.rm.reg = i.op[dest].regs->reg_num;
- i.rm.regmem = i.op[source].regs->reg_num;
- if ((i.op[dest].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- if ((i.op[source].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- }
- else
- {
- i.rm.reg = i.op[source].regs->reg_num;
- i.rm.regmem = i.op[dest].regs->reg_num;
- if ((i.op[dest].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- if ((i.op[source].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
- }
- if (flag_code != CODE_64BIT && (i.rex & (REX_R | REX_B)))
+ /* There's only ever one segment override allowed per instruction.
+ This instruction possibly has a legal segment override on the
+ second operand, so copy the segment to where non-string
+ instructions store it, allowing common code. */
+ i.seg[0] = i.seg[1];
+ }
+ else if (i.tm.operand_types[mem_op + 1].bitfield.esseg)
+ {
+ if (i.seg[1] != NULL && i.seg[1] != &es)
{
- if (!((i.types[0] | i.types[1]) & Control))
- abort ();
- i.rex &= ~(REX_R | REX_B);
- add_prefix (LOCK_PREFIX_OPCODE);
+ as_bad (_("`%s' operand %d must use `%ses' segment"),
+ i.tm.name,
+ mem_op + 2,
+ register_prefix);
+ return 0;
}
}
- else
- { /* If it's not 2 reg operands... */
- if (i.mem_operands)
- {
- unsigned int fake_zero_displacement = 0;
- unsigned int op;
-
- for (op = 0; op < i.operands; op++)
- if ((i.types[op] & AnyMem))
- break;
- assert (op < i.operands);
-
- default_seg = &ds;
+ return 1;
+}
- if (i.base_reg == 0)
- {
- i.rm.mode = 0;
- if (!i.disp_operands)
- fake_zero_displacement = 1;
- if (i.index_reg == 0)
- {
- /* Operand is just <disp> */
- if (flag_code == CODE_64BIT)
- {
- /* 64bit mode overwrites the 32bit absolute
- addressing by RIP relative addressing and
- absolute addressing is encoded by one of the
- redundant SIB forms. */
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
- i.sib.base = NO_BASE_REGISTER;
- i.sib.index = NO_INDEX_REGISTER;
- i.types[op] = ((i.prefix[ADDR_PREFIX] == 0)
- ? Disp32S : Disp32);
- }
- else if ((flag_code == CODE_16BIT)
- ^ (i.prefix[ADDR_PREFIX] != 0))
- {
- i.rm.regmem = NO_BASE_REGISTER_16;
- i.types[op] = Disp16;
- }
- else
- {
- i.rm.regmem = NO_BASE_REGISTER;
- i.types[op] = Disp32;
- }
- }
- else /* !i.base_reg && i.index_reg */
- {
- i.sib.index = i.index_reg->reg_num;
- i.sib.base = NO_BASE_REGISTER;
- i.sib.scale = i.log2_scale_factor;
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
- i.types[op] &= ~Disp;
- if (flag_code != CODE_64BIT)
- i.types[op] |= Disp32; /* Must be 32 bit */
- else
- i.types[op] |= Disp32S;
- if ((i.index_reg->reg_flags & RegRex) != 0)
- i.rex |= REX_X;
- }
- }
- /* RIP addressing for 64bit mode. */
- else if (i.base_reg->reg_type == BaseIndex)
+static int
+process_suffix (void)
+{
+ /* If matched instruction specifies an explicit instruction mnemonic
+ suffix, use it. */
+ if (i.tm.opcode_modifier.size16)
+ i.suffix = WORD_MNEM_SUFFIX;
+ else if (i.tm.opcode_modifier.size32)
+ i.suffix = LONG_MNEM_SUFFIX;
+ else if (i.tm.opcode_modifier.size64)
+ i.suffix = QWORD_MNEM_SUFFIX;
+ else if (i.reg_operands)
+ {
+ /* If there's no instruction mnemonic suffix we try to invent one
+ based on register operands. */
+ if (!i.suffix)
+ {
+ /* We take i.suffix from the last register operand specified,
+ Destination register type is more significant than source
+ register type. crc32 in SSE4.2 prefers source register
+ type. */
+ if (i.tm.base_opcode == 0xf20f38f1)
{
- i.rm.regmem = NO_BASE_REGISTER;
- i.types[op] &= ~ Disp;
- i.types[op] |= Disp32S;
- i.flags[op] |= Operand_PCrel;
- if (! i.disp_operands)
- fake_zero_displacement = 1;
+ if (i.types[0].bitfield.reg16)
+ i.suffix = WORD_MNEM_SUFFIX;
+ else if (i.types[0].bitfield.reg32)
+ i.suffix = LONG_MNEM_SUFFIX;
+ else if (i.types[0].bitfield.reg64)
+ i.suffix = QWORD_MNEM_SUFFIX;
}
- else if (i.base_reg->reg_type & Reg16)
+ else if (i.tm.base_opcode == 0xf20f38f0)
{
- switch (i.base_reg->reg_num)
- {
- case 3: /* (%bx) */
- if (i.index_reg == 0)
- i.rm.regmem = 7;
- else /* (%bx,%si) -> 0, or (%bx,%di) -> 1 */
- i.rm.regmem = i.index_reg->reg_num - 6;
- break;
- case 5: /* (%bp) */
- default_seg = &ss;
- if (i.index_reg == 0)
- {
- i.rm.regmem = 6;
- if ((i.types[op] & Disp) == 0)
- {
- /* fake (%bp) into 0(%bp) */
- i.types[op] |= Disp8;
- fake_zero_displacement = 1;
- }
- }
- else /* (%bp,%si) -> 2, or (%bp,%di) -> 3 */
- i.rm.regmem = i.index_reg->reg_num - 6 + 2;
- break;
- default: /* (%si) -> 4 or (%di) -> 5 */
- i.rm.regmem = i.base_reg->reg_num - 6 + 4;
- }
- i.rm.mode = mode_from_disp_size (i.types[op]);
+ if (i.types[0].bitfield.reg8)
+ i.suffix = BYTE_MNEM_SUFFIX;
}
- else /* i.base_reg and 32/64 bit mode */
+
+ if (!i.suffix)
{
- if (flag_code == CODE_64BIT
- && (i.types[op] & Disp))
- i.types[op] = ((i.types[op] & Disp8)
- | (i.prefix[ADDR_PREFIX] == 0
- ? Disp32S : Disp32));
+ int op;
- i.rm.regmem = i.base_reg->reg_num;
- if ((i.base_reg->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
- i.sib.base = i.base_reg->reg_num;
- /* x86-64 ignores REX prefix bit here to avoid decoder
- complications. */
- if ((i.base_reg->reg_num & 7) == EBP_REG_NUM)
- {
- default_seg = &ss;
- if (i.disp_operands == 0)
- {
- fake_zero_displacement = 1;
- i.types[op] |= Disp8;
- }
- }
- else if (i.base_reg->reg_num == ESP_REG_NUM)
- {
- default_seg = &ss;
- }
- i.sib.scale = i.log2_scale_factor;
- if (i.index_reg == 0)
- {
- /* <disp>(%esp) becomes two byte modrm with no index
- register. We've already stored the code for esp
- in i.rm.regmem ie. ESCAPE_TO_TWO_BYTE_ADDRESSING.
- Any base register besides %esp will not use the
- extra modrm byte. */
- i.sib.index = NO_INDEX_REGISTER;
-#if !SCALE1_WHEN_NO_INDEX
- /* Another case where we force the second modrm byte. */
- if (i.log2_scale_factor)
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
-#endif
- }
- else
+ if (i.tm.base_opcode == 0xf20f38f1
+ || i.tm.base_opcode == 0xf20f38f0)
{
- i.sib.index = i.index_reg->reg_num;
- i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
- if ((i.index_reg->reg_flags & RegRex) != 0)
- i.rex |= REX_X;
+ /* We have to know the operand size for crc32. */
+ as_bad (_("ambiguous memory operand size for `%s`"),
+ i.tm.name);
+ return 0;
}
- if (i.disp_operands
- && (i.reloc[op] == BFD_RELOC_386_TLS_DESC_CALL
- || i.reloc[op] == BFD_RELOC_X86_64_TLSDESC_CALL))
- i.rm.mode = 0;
- else
- i.rm.mode = mode_from_disp_size (i.types[op]);
+ for (op = i.operands; --op >= 0;)
+ if (!i.tm.operand_types[op].bitfield.inoutportreg)
+ {
+ if (i.types[op].bitfield.reg8)
+ {
+ i.suffix = BYTE_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg16)
+ {
+ i.suffix = WORD_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg32)
+ {
+ i.suffix = LONG_MNEM_SUFFIX;
+ break;
+ }
+ else if (i.types[op].bitfield.reg64)
+ {
+ i.suffix = QWORD_MNEM_SUFFIX;
+ break;
+ }
+ }
}
-
- if (fake_zero_displacement)
+ }
+ else if (i.suffix == BYTE_MNEM_SUFFIX)
+ {
+ if (!check_byte_reg ())
+ return 0;
+ }
+ else if (i.suffix == LONG_MNEM_SUFFIX)
+ {
+ if (!check_long_reg ())
+ return 0;
+ }
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ {
+ if (intel_syntax
+ && i.tm.opcode_modifier.ignoresize
+ && i.tm.opcode_modifier.no_qsuf)
+ i.suffix = 0;
+ else if (!check_qword_reg ())
+ return 0;
+ }
+ else if (i.suffix == WORD_MNEM_SUFFIX)
+ {
+ if (!check_word_reg ())
+ return 0;
+ }
+ else if (i.suffix == XMMWORD_MNEM_SUFFIX
+ || i.suffix == YMMWORD_MNEM_SUFFIX)
+ {
+ /* Skip if the instruction has x/y suffix. match_template
+ should check if it is a valid suffix. */
+ }
+ else if (intel_syntax && i.tm.opcode_modifier.ignoresize)
+ /* Do nothing if the instruction is going to ignore the prefix. */
+ ;
+ else
+ abort ();
+ }
+ else if (i.tm.opcode_modifier.defaultsize
+ && !i.suffix
+ /* exclude fldenv/frstor/fsave/fstenv */
+ && i.tm.opcode_modifier.no_ssuf)
+ {
+ i.suffix = stackop_size;
+ }
+ else if (intel_syntax
+ && !i.suffix
+ && (i.tm.operand_types[0].bitfield.jumpabsolute
+ || i.tm.opcode_modifier.jumpbyte
+ || i.tm.opcode_modifier.jumpintersegment
+ || (i.tm.base_opcode == 0x0f01 /* [ls][gi]dt */
+ && i.tm.extension_opcode <= 3)))
+ {
+ switch (flag_code)
+ {
+ case CODE_64BIT:
+ if (!i.tm.opcode_modifier.no_qsuf)
{
- /* Fakes a zero displacement assuming that i.types[op]
- holds the correct displacement size. */
- expressionS *exp;
-
- assert (i.op[op].disps == 0);
- exp = &disp_expressions[i.disp_operands++];
- i.op[op].disps = exp;
- exp->X_op = O_constant;
- exp->X_add_number = 0;
- exp->X_add_symbol = (symbolS *) 0;
- exp->X_op_symbol = (symbolS *) 0;
+ i.suffix = QWORD_MNEM_SUFFIX;
+ break;
}
+ case CODE_32BIT:
+ if (!i.tm.opcode_modifier.no_lsuf)
+ i.suffix = LONG_MNEM_SUFFIX;
+ break;
+ case CODE_16BIT:
+ if (!i.tm.opcode_modifier.no_wsuf)
+ i.suffix = WORD_MNEM_SUFFIX;
+ break;
}
+ }
- /* Fill in i.rm.reg or i.rm.regmem field with register operand
- (if any) based on i.tm.extension_opcode. Again, we must be
- careful to make sure that segment/control/debug/test/MMX
- registers are coded into the i.rm.reg field. */
- if (i.reg_operands)
+ if (!i.suffix)
+ {
+ if (!intel_syntax)
{
- unsigned int op;
-
- for (op = 0; op < i.operands; op++)
- if ((i.types[op] & (Reg | RegMMX | RegXMM
- | SReg2 | SReg3
- | Control | Debug | Test)))
- break;
- assert (op < i.operands);
-
- /* If there is an extension opcode to put here, the register
- number must be put into the regmem field. */
- if (i.tm.extension_opcode != None)
+ if (i.tm.opcode_modifier.w)
{
- i.rm.regmem = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_B;
+ as_bad (_("no instruction mnemonic suffix given and "
+ "no register operands; can't size instruction"));
+ return 0;
}
- else
+ }
+ else
+ {
+ unsigned int suffixes;
+
+ suffixes = !i.tm.opcode_modifier.no_bsuf;
+ if (!i.tm.opcode_modifier.no_wsuf)
+ suffixes |= 1 << 1;
+ if (!i.tm.opcode_modifier.no_lsuf)
+ suffixes |= 1 << 2;
+ if (!i.tm.opcode_modifier.no_ldsuf)
+ suffixes |= 1 << 3;
+ if (!i.tm.opcode_modifier.no_ssuf)
+ suffixes |= 1 << 4;
+ if (!i.tm.opcode_modifier.no_qsuf)
+ suffixes |= 1 << 5;
+
+ /* There are more than suffix matches. */
+ if (i.tm.opcode_modifier.w
+ || ((suffixes & (suffixes - 1))
+ && !i.tm.opcode_modifier.defaultsize
+ && !i.tm.opcode_modifier.ignoresize))
{
- i.rm.reg = i.op[op].regs->reg_num;
- if ((i.op[op].regs->reg_flags & RegRex) != 0)
- i.rex |= REX_R;
+ as_bad (_("ambiguous operand size for `%s'"), i.tm.name);
+ return 0;
}
-
- /* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
- must set it to 3 to indicate this is a register operand
- in the regmem field. */
- if (!i.mem_operands)
- i.rm.mode = 3;
}
-
- /* Fill in i.rm.reg field with extension opcode (if any). */
- if (i.tm.extension_opcode != None)
- i.rm.reg = i.tm.extension_opcode;
}
- return default_seg;
-}
-
-static void
-output_branch (void)
-{
- char *p;
- int code16;
- int prefix;
- relax_substateT subtype;
- symbolS *sym;
- offsetT off;
- code16 = 0;
- if (flag_code == CODE_16BIT)
- code16 = CODE16;
+ /* Change the opcode based on the operand size given by i.suffix;
+ We don't need to change things for byte insns. */
- prefix = 0;
- if (i.prefix[DATA_PREFIX] != 0)
- {
- prefix = 1;
- i.prefixes -= 1;
- code16 ^= CODE16;
- }
- /* Pentium4 branch hints. */
- if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
- || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
- {
- prefix++;
- i.prefixes--;
- }
- if (i.prefix[REX_PREFIX] != 0)
+ if (i.suffix
+ && i.suffix != BYTE_MNEM_SUFFIX
+ && i.suffix != XMMWORD_MNEM_SUFFIX
+ && i.suffix != YMMWORD_MNEM_SUFFIX)
{
- prefix++;
- i.prefixes--;
- }
+ /* It's not a byte, select word/dword operation. */
+ if (i.tm.opcode_modifier.w)
+ {
+ if (i.tm.opcode_modifier.shortform)
+ i.tm.base_opcode |= 8;
+ else
+ i.tm.base_opcode |= 1;
+ }
- if (i.prefixes != 0 && !intel_syntax)
- as_warn (_("skipping prefixes on this instruction"));
+ /* Now select between word & dword operations via the operand
+ size prefix, except for instructions that will ignore this
+ prefix anyway. */
+ if (i.tm.opcode_modifier.addrprefixop0)
+ {
+ /* The address size override prefix changes the size of the
+ first operand. */
+ if ((flag_code == CODE_32BIT
+ && i.op->regs[0].reg_type.bitfield.reg16)
+ || (flag_code != CODE_32BIT
+ && i.op->regs[0].reg_type.bitfield.reg32))
+ if (!add_prefix (ADDR_PREFIX_OPCODE))
+ return 0;
+ }
+ else if (i.suffix != QWORD_MNEM_SUFFIX
+ && i.suffix != LONG_DOUBLE_MNEM_SUFFIX
+ && !i.tm.opcode_modifier.ignoresize
+ && !i.tm.opcode_modifier.floatmf
+ && ((i.suffix == LONG_MNEM_SUFFIX) == (flag_code == CODE_16BIT)
+ || (flag_code == CODE_64BIT
+ && i.tm.opcode_modifier.jumpbyte)))
+ {
+ unsigned int prefix = DATA_PREFIX_OPCODE;
- /* It's always a symbol; End frag & setup for relax.
- Make sure there is enough room in this frag for the largest
- instruction we may generate in md_convert_frag. This is 2
- bytes for the opcode and room for the prefix and largest
- displacement. */
- frag_grow (prefix + 2 + 4);
- /* Prefix and 1 opcode byte go in fr_fix. */
- p = frag_more (prefix + 1);
- if (i.prefix[DATA_PREFIX] != 0)
- *p++ = DATA_PREFIX_OPCODE;
- if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE
- || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE)
- *p++ = i.prefix[SEG_PREFIX];
- if (i.prefix[REX_PREFIX] != 0)
- *p++ = i.prefix[REX_PREFIX];
- *p = i.tm.base_opcode;
+ if (i.tm.opcode_modifier.jumpbyte) /* jcxz, loop */
+ prefix = ADDR_PREFIX_OPCODE;
- if ((unsigned char) *p == JUMP_PC_RELATIVE)
- subtype = ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL);
- else if ((cpu_arch_flags & Cpu386) != 0)
- subtype = ENCODE_RELAX_STATE (COND_JUMP, SMALL);
- else
- subtype = ENCODE_RELAX_STATE (COND_JUMP86, SMALL);
- subtype |= code16;
+ if (!add_prefix (prefix))
+ return 0;
+ }
- sym = i.op[0].disps->X_add_symbol;
- off = i.op[0].disps->X_add_number;
+ /* Set mode64 for an operand. */
+ if (i.suffix == QWORD_MNEM_SUFFIX
+ && flag_code == CODE_64BIT
+ && !i.tm.opcode_modifier.norex64)
+ {
+ /* Special case for xchg %rax,%rax. It is NOP and doesn't
+ need rex64. cmpxchg8b is also a special case. */
+ if (! (i.operands == 2
+ && i.tm.base_opcode == 0x90
+ && i.tm.extension_opcode == None
+ && operand_type_equal (&i.types [0], &acc64)
+ && operand_type_equal (&i.types [1], &acc64))
+ && ! (i.operands == 1
+ && i.tm.base_opcode == 0xfc7
+ && i.tm.extension_opcode == 1
+ && !operand_type_check (i.types [0], reg)
+ && operand_type_check (i.types [0], anymem)))
+ i.rex |= REX_W;
+ }
- if (i.op[0].disps->X_op != O_constant
- && i.op[0].disps->X_op != O_symbol)
- {
- /* Handle complex expressions. */
- sym = make_expr_symbol (i.op[0].disps);
- off = 0;
+ /* Size floating point instruction. */
+ if (i.suffix == LONG_MNEM_SUFFIX)
+ if (i.tm.opcode_modifier.floatmf)
+ i.tm.base_opcode ^= 4;
}
- /* 1 possible extra opcode + 4 byte displacement go in var part.
- Pass reloc in fr_var. */
- frag_var (rs_machine_dependent, 5, i.reloc[0], subtype, sym, off, p);
+ return 1;
}
-static void
-output_jump (void)
+static int
+check_byte_reg (void)
{
- char *p;
- int size;
- fixS *fixP;
+ int op;
- if (i.tm.opcode_modifier & JumpByte)
- {
- /* This is a loop or jecxz type instruction. */
- size = 1;
- if (i.prefix[ADDR_PREFIX] != 0)
- {
- FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE);
- i.prefixes -= 1;
- }
- /* Pentium4 branch hints. */
- if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
- || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
- {
- FRAG_APPEND_1_CHAR (i.prefix[SEG_PREFIX]);
- i.prefixes--;
- }
- }
- else
+ for (op = i.operands; --op >= 0;)
{
- int code16;
+ /* If this is an eight bit register, it's OK. If it's the 16 or
+ 32 bit version of an eight bit register, we will just use the
+ low portion, and that's OK too. */
+ if (i.types[op].bitfield.reg8)
+ continue;
- code16 = 0;
- if (flag_code == CODE_16BIT)
- code16 = CODE16;
+ /* Don't generate this warning if not needed. */
+ if (intel_syntax && i.tm.opcode_modifier.byteokintel)
+ continue;
- if (i.prefix[DATA_PREFIX] != 0)
+ /* crc32 doesn't generate this warning. */
+ if (i.tm.base_opcode == 0xf20f38f0)
+ continue;
+
+ if ((i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64)
+ && i.op[op].regs->reg_num < 4)
{
- FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE);
- i.prefixes -= 1;
- code16 ^= CODE16;
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (flag_code == CODE_64BIT
+ && !i.tm.operand_types[op].bitfield.inoutportreg)
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+#if REGISTER_WARNINGS
+ if (!quiet_warnings
+ && !i.tm.operand_types[op].bitfield.inoutportreg)
+ as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
+ register_prefix,
+ (i.op[op].regs + (i.types[op].bitfield.reg16
+ ? REGNAM_AL - REGNAM_AX
+ : REGNAM_AL - REGNAM_EAX))->reg_name,
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.suffix);
+#endif
+ continue;
+ }
+ /* Any other register is bad. */
+ if (i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64
+ || i.types[op].bitfield.regmmx
+ || i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
+ || i.types[op].bitfield.sreg2
+ || i.types[op].bitfield.sreg3
+ || i.types[op].bitfield.control
+ || i.types[op].bitfield.debug
+ || i.types[op].bitfield.test
+ || i.types[op].bitfield.floatreg
+ || i.types[op].bitfield.floatacc)
+ {
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
}
-
- size = 4;
- if (code16)
- size = 2;
- }
-
- if (i.prefix[REX_PREFIX] != 0)
- {
- FRAG_APPEND_1_CHAR (i.prefix[REX_PREFIX]);
- i.prefixes -= 1;
}
-
- if (i.prefixes != 0 && !intel_syntax)
- as_warn (_("skipping prefixes on this instruction"));
-
- p = frag_more (1 + size);
- *p++ = i.tm.base_opcode;
-
- fixP = fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[0].disps, 1, reloc (size, 1, 1, i.reloc[0]));
-
- /* All jumps handled here are signed, but don't use a signed limit
- check for 32 and 16 bit jumps as we want to allow wrap around at
- 4G and 64k respectively. */
- if (size == 1)
- fixP->fx_signed = 1;
+ return 1;
}
-static void
-output_interseg_jump (void)
+static int
+check_long_reg (void)
{
- char *p;
- int size;
- int prefix;
- int code16;
-
- code16 = 0;
- if (flag_code == CODE_16BIT)
- code16 = CODE16;
+ int op;
- prefix = 0;
- if (i.prefix[DATA_PREFIX] != 0)
- {
- prefix = 1;
- i.prefixes -= 1;
- code16 ^= CODE16;
- }
- if (i.prefix[REX_PREFIX] != 0)
- {
- prefix++;
- i.prefixes -= 1;
- }
-
- size = 4;
- if (code16)
- size = 2;
-
- if (i.prefixes != 0 && !intel_syntax)
- as_warn (_("skipping prefixes on this instruction"));
+ for (op = i.operands; --op >= 0;)
+ /* Reject eight bit registers, except where the template requires
+ them. (eg. movzb) */
+ if (i.types[op].bitfield.reg8
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ /* Warn if the e prefix on a general reg is missing. */
+ else if ((!quiet_warnings || flag_code == CODE_64BIT)
+ && i.types[op].bitfield.reg16
+ && (i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (flag_code == CODE_64BIT)
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+#if REGISTER_WARNINGS
+ else
+ as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
+ register_prefix,
+ (i.op[op].regs + REGNAM_EAX - REGNAM_AX)->reg_name,
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.suffix);
+#endif
+ }
+ /* Warn if the r prefix on a general reg is missing. */
+ else if (i.types[op].bitfield.reg64
+ && (i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ if (intel_syntax
+ && i.tm.opcode_modifier.toqword
+ && !i.types[0].bitfield.regxmm)
+ {
+ /* Convert to QWORD. We want REX byte. */
+ i.suffix = QWORD_MNEM_SUFFIX;
+ }
+ else
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+ }
+ return 1;
+}
- /* 1 opcode; 2 segment; offset */
- p = frag_more (prefix + 1 + 2 + size);
+static int
+check_qword_reg (void)
+{
+ int op;
- if (i.prefix[DATA_PREFIX] != 0)
- *p++ = DATA_PREFIX_OPCODE;
+ for (op = i.operands; --op >= 0; )
+ /* Reject eight bit registers, except where the template requires
+ them. (eg. movzb) */
+ if (i.types[op].bitfield.reg8
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ /* Warn if the e prefix on a general reg is missing. */
+ else if ((i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32)
+ && (i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (intel_syntax
+ && i.tm.opcode_modifier.todword
+ && !i.types[0].bitfield.regxmm)
+ {
+ /* Convert to DWORD. We don't want REX byte. */
+ i.suffix = LONG_MNEM_SUFFIX;
+ }
+ else
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+ }
+ return 1;
+}
- if (i.prefix[REX_PREFIX] != 0)
- *p++ = i.prefix[REX_PREFIX];
+static int
+check_word_reg (void)
+{
+ int op;
+ for (op = i.operands; --op >= 0;)
+ /* Reject eight bit registers, except where the template requires
+ them. (eg. movzb) */
+ if (i.types[op].bitfield.reg8
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.reg32
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ as_bad (_("`%s%s' not allowed with `%s%c'"),
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.tm.name,
+ i.suffix);
+ return 0;
+ }
+ /* Warn if the e prefix on a general reg is present. */
+ else if ((!quiet_warnings || flag_code == CODE_64BIT)
+ && i.types[op].bitfield.reg32
+ && (i.tm.operand_types[op].bitfield.reg16
+ || i.tm.operand_types[op].bitfield.acc))
+ {
+ /* Prohibit these changes in the 64bit mode, since the
+ lowering is more complicated. */
+ if (flag_code == CODE_64BIT)
+ {
+ as_bad (_("Incorrect register `%s%s' used with `%c' suffix"),
+ register_prefix, i.op[op].regs->reg_name,
+ i.suffix);
+ return 0;
+ }
+ else
+#if REGISTER_WARNINGS
+ as_warn (_("using `%s%s' instead of `%s%s' due to `%c' suffix"),
+ register_prefix,
+ (i.op[op].regs + REGNAM_AX - REGNAM_EAX)->reg_name,
+ register_prefix,
+ i.op[op].regs->reg_name,
+ i.suffix);
+#endif
+ }
+ return 1;
+}
- *p++ = i.tm.base_opcode;
- if (i.op[1].imms->X_op == O_constant)
+static int
+update_imm (unsigned int j)
+{
+ i386_operand_type overlap = i.types[j];
+ if ((overlap.bitfield.imm8
+ || overlap.bitfield.imm8s
+ || overlap.bitfield.imm16
+ || overlap.bitfield.imm32
+ || overlap.bitfield.imm32s
+ || overlap.bitfield.imm64)
+ && !operand_type_equal (&overlap, &imm8)
+ && !operand_type_equal (&overlap, &imm8s)
+ && !operand_type_equal (&overlap, &imm16)
+ && !operand_type_equal (&overlap, &imm32)
+ && !operand_type_equal (&overlap, &imm32s)
+ && !operand_type_equal (&overlap, &imm64))
{
- offsetT n = i.op[1].imms->X_add_number;
+ if (i.suffix)
+ {
+ i386_operand_type temp;
- if (size == 2
- && !fits_in_unsigned_word (n)
- && !fits_in_signed_word (n))
+ operand_type_set (&temp, 0);
+ if (i.suffix == BYTE_MNEM_SUFFIX)
+ {
+ temp.bitfield.imm8 = overlap.bitfield.imm8;
+ temp.bitfield.imm8s = overlap.bitfield.imm8s;
+ }
+ else if (i.suffix == WORD_MNEM_SUFFIX)
+ temp.bitfield.imm16 = overlap.bitfield.imm16;
+ else if (i.suffix == QWORD_MNEM_SUFFIX)
+ {
+ temp.bitfield.imm64 = overlap.bitfield.imm64;
+ temp.bitfield.imm32s = overlap.bitfield.imm32s;
+ }
+ else
+ temp.bitfield.imm32 = overlap.bitfield.imm32;
+ overlap = temp;
+ }
+ else if (operand_type_equal (&overlap, &imm16_32_32s)
+ || operand_type_equal (&overlap, &imm16_32)
+ || operand_type_equal (&overlap, &imm16_32s))
{
- as_bad (_("16-bit jump out of range"));
- return;
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[DATA_PREFIX] != 0))
+ overlap = imm16;
+ else
+ overlap = imm32s;
+ }
+ if (!operand_type_equal (&overlap, &imm8)
+ && !operand_type_equal (&overlap, &imm8s)
+ && !operand_type_equal (&overlap, &imm16)
+ && !operand_type_equal (&overlap, &imm32)
+ && !operand_type_equal (&overlap, &imm32s)
+ && !operand_type_equal (&overlap, &imm64))
+ {
+ as_bad (_("no instruction mnemonic suffix given; "
+ "can't determine immediate size"));
+ return 0;
}
- md_number_to_chars (p, n, size);
}
- else
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[1].imms, 0, reloc (size, 0, 0, i.reloc[1]));
- if (i.op[0].imms->X_op != O_constant)
- as_bad (_("can't handle non absolute segment in `%s'"),
- i.tm.name);
- md_number_to_chars (p + size, (valueT) i.op[0].imms->X_add_number, 2);
+ i.types[j] = overlap;
+
+ return 1;
}
-static void
-output_insn (void)
+static int
+finalize_imm (void)
{
- fragS *insn_start_frag;
- offsetT insn_start_off;
+ unsigned int j, n;
- /* Tie dwarf2 debug info to the address at the start of the insn.
- We can't do this after the insn has been output as the current
- frag may have been closed off. eg. by frag_var. */
- dwarf2_emit_insn (0);
+ /* Update the first 2 immediate operands. */
+ n = i.operands > 2 ? 2 : i.operands;
+ if (n)
+ {
+ for (j = 0; j < n; j++)
+ if (update_imm (j) == 0)
+ return 0;
- insn_start_frag = frag_now;
- insn_start_off = frag_now_fix ();
+ /* The 3rd operand can't be immediate operand. */
+ gas_assert (operand_type_check (i.types[2], imm) == 0);
+ }
- /* Output jumps. */
- if (i.tm.opcode_modifier & Jump)
- output_branch ();
- else if (i.tm.opcode_modifier & (JumpByte | JumpDword))
- output_jump ();
- else if (i.tm.opcode_modifier & JumpInterSegment)
- output_interseg_jump ();
+ return 1;
+}
+
+static int
+bad_implicit_operand (int xmm)
+{
+ const char *reg = xmm ? "xmm0" : "ymm0";
+ if (intel_syntax)
+ as_bad (_("the last operand of `%s' must be `%s%s'"),
+ i.tm.name, register_prefix, reg);
else
+ as_bad (_("the first operand of `%s' must be `%s%s'"),
+ i.tm.name, register_prefix, reg);
+ return 0;
+}
+
+static int
+process_operands (void)
+{
+ /* Default segment register this instruction will use for memory
+ accesses. 0 means unknown. This is only for optimizing out
+ unnecessary segment overrides. */
+ const seg_entry *default_seg = 0;
+
+ if (i.tm.opcode_modifier.sse2avx
+ && (i.tm.opcode_modifier.vexnds
+ || i.tm.opcode_modifier.vexndd))
{
- /* Output normal instructions here. */
- char *p;
- unsigned char *q;
- unsigned int prefix;
+ unsigned int dup = i.operands;
+ unsigned int dest = dup - 1;
+ unsigned int j;
- /* All opcodes on i386 have either 1 or 2 bytes. SSSE3 and
- SSE4 instructions have 3 bytes. We may use one more higher
- byte to specify a prefix the instruction requires. Exclude
- instructions which are in both SSE4 and ABM. */
- if ((i.tm.cpu_flags & (CpuSSSE3 | CpuSSE4)) != 0
- && (i.tm.cpu_flags & CpuABM) == 0)
+ /* The destination must be an xmm register. */
+ gas_assert (i.reg_operands
+ && MAX_OPERANDS > dup
+ && operand_type_equal (&i.types[dest], ®xmm));
+
+ if (i.tm.opcode_modifier.firstxmm0)
{
- if (i.tm.base_opcode & 0xff000000)
+ /* The first operand is implicit and must be xmm0. */
+ gas_assert (operand_type_equal (&i.types[0], ®xmm));
+ if (i.op[0].regs->reg_num != 0)
+ return bad_implicit_operand (1);
+
+ if (i.tm.opcode_modifier.vex3sources)
{
- prefix = (i.tm.base_opcode >> 24) & 0xff;
- goto check_prefix;
+ /* Keep xmm0 for instructions with VEX prefix and 3
+ sources. */
+ goto duplicate;
}
- }
- else if ((i.tm.base_opcode & 0xff0000) != 0)
- {
- prefix = (i.tm.base_opcode >> 16) & 0xff;
- if ((i.tm.cpu_flags & CpuPadLock) != 0)
+ else
{
- check_prefix:
- if (prefix != REPE_PREFIX_OPCODE
- || i.prefix[LOCKREP_PREFIX] != REPE_PREFIX_OPCODE)
- add_prefix (prefix);
+ /* We remove the first xmm0 and keep the number of
+ operands unchanged, which in fact duplicates the
+ destination. */
+ for (j = 1; j < i.operands; j++)
+ {
+ i.op[j - 1] = i.op[j];
+ i.types[j - 1] = i.types[j];
+ i.tm.operand_types[j - 1] = i.tm.operand_types[j];
+ }
}
- else
- add_prefix (prefix);
}
-
- /* The prefix bytes. */
- for (q = i.prefix;
- q < i.prefix + sizeof (i.prefix) / sizeof (i.prefix[0]);
- q++)
+ else if (i.tm.opcode_modifier.implicit1stxmm0)
{
- if (*q)
+ gas_assert ((MAX_OPERANDS - 1) > dup
+ && i.tm.opcode_modifier.vex3sources);
+
+ /* Add the implicit xmm0 for instructions with VEX prefix
+ and 3 sources. */
+ for (j = i.operands; j > 0; j--)
{
- p = frag_more (1);
- md_number_to_chars (p, (valueT) *q, 1);
+ i.op[j] = i.op[j - 1];
+ i.types[j] = i.types[j - 1];
+ i.tm.operand_types[j] = i.tm.operand_types[j - 1];
}
- }
-
- /* Now the opcode; be careful about word order here! */
- if (fits_in_unsigned_byte (i.tm.base_opcode))
- {
- FRAG_APPEND_1_CHAR (i.tm.base_opcode);
+ i.op[0].regs
+ = (const reg_entry *) hash_find (reg_hash, "xmm0");
+ i.types[0] = regxmm;
+ i.tm.operand_types[0] = regxmm;
+
+ i.operands += 2;
+ i.reg_operands += 2;
+ i.tm.operands += 2;
+
+ dup++;
+ dest++;
+ i.op[dup] = i.op[dest];
+ i.types[dup] = i.types[dest];
+ i.tm.operand_types[dup] = i.tm.operand_types[dest];
}
else
{
- if ((i.tm.cpu_flags & (CpuSSSE3 | CpuSSE4)) != 0
- && (i.tm.cpu_flags & CpuABM) == 0)
- {
- p = frag_more (3);
- *p++ = (i.tm.base_opcode >> 16) & 0xff;
- }
- else
- p = frag_more (2);
-
- /* Put out high byte first: can't use md_number_to_chars! */
- *p++ = (i.tm.base_opcode >> 8) & 0xff;
- *p = i.tm.base_opcode & 0xff;
+duplicate:
+ i.operands++;
+ i.reg_operands++;
+ i.tm.operands++;
+
+ i.op[dup] = i.op[dest];
+ i.types[dup] = i.types[dest];
+ i.tm.operand_types[dup] = i.tm.operand_types[dest];
}
- /* Now the modrm byte and sib byte (if present). */
- if (i.tm.opcode_modifier & Modrm)
+ if (i.tm.opcode_modifier.immext)
+ process_immext ();
+ }
+ else if (i.tm.opcode_modifier.firstxmm0)
+ {
+ unsigned int j;
+
+ /* The first operand is implicit and must be xmm0/ymm0. */
+ gas_assert (i.reg_operands
+ && (operand_type_equal (&i.types[0], ®xmm)
+ || operand_type_equal (&i.types[0], ®ymm)));
+ if (i.op[0].regs->reg_num != 0)
+ return bad_implicit_operand (i.types[0].bitfield.regxmm);
+
+ for (j = 1; j < i.operands; j++)
{
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.rm.regmem << 0
- | i.rm.reg << 3
- | i.rm.mode << 6),
- 1);
- /* If i.rm.regmem == ESP (4)
- && i.rm.mode != (Register mode)
- && not 16 bit
- ==> need second modrm byte. */
- if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING
- && i.rm.mode != 3
- && !(i.base_reg && (i.base_reg->reg_type & Reg16) != 0))
- {
- p = frag_more (1);
- md_number_to_chars (p,
- (valueT) (i.sib.base << 0
- | i.sib.index << 3
- | i.sib.scale << 6),
- 1);
- }
+ i.op[j - 1] = i.op[j];
+ i.types[j - 1] = i.types[j];
+
+ /* We need to adjust fields in i.tm since they are used by
+ build_modrm_byte. */
+ i.tm.operand_types [j - 1] = i.tm.operand_types [j];
}
- if (i.disp_operands)
- output_disp (insn_start_frag, insn_start_off);
+ i.operands--;
+ i.reg_operands--;
+ i.tm.operands--;
+ }
+ else if (i.tm.opcode_modifier.regkludge)
+ {
+ /* The imul $imm, %reg instruction is converted into
+ imul $imm, %reg, %reg, and the clr %reg instruction
+ is converted into xor %reg, %reg. */
- if (i.imm_operands)
- output_imm (insn_start_frag, insn_start_off);
+ unsigned int first_reg_op;
+
+ if (operand_type_check (i.types[0], reg))
+ first_reg_op = 0;
+ else
+ first_reg_op = 1;
+ /* Pretend we saw the extra register operand. */
+ gas_assert (i.reg_operands == 1
+ && i.op[first_reg_op + 1].regs == 0);
+ i.op[first_reg_op + 1].regs = i.op[first_reg_op].regs;
+ i.types[first_reg_op + 1] = i.types[first_reg_op];
+ i.operands++;
+ i.reg_operands++;
}
-#ifdef DEBUG386
- if (flag_debug)
+ if (i.tm.opcode_modifier.shortform)
{
- pi ("" /*line*/, &i);
- }
-#endif /* DEBUG386 */
-}
+ if (i.types[0].bitfield.sreg2
+ || i.types[0].bitfield.sreg3)
+ {
+ if (i.tm.base_opcode == POP_SEG_SHORT
+ && i.op[0].regs->reg_num == 1)
+ {
+ as_bad (_("you can't `pop %scs'"), register_prefix);
+ return 0;
+ }
+ i.tm.base_opcode |= (i.op[0].regs->reg_num << 3);
+ if ((i.op[0].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ /* The register or float register operand is in operand
+ 0 or 1. */
+ unsigned int op;
-/* Return the size of the displacement operand N. */
+ if (i.types[0].bitfield.floatreg
+ || operand_type_check (i.types[0], reg))
+ op = 0;
+ else
+ op = 1;
+ /* Register goes in low 3 bits of opcode. */
+ i.tm.base_opcode |= i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ if (!quiet_warnings && i.tm.opcode_modifier.ugh)
+ {
+ /* Warn about some common errors, but press on regardless.
+ The first case can be generated by gcc (<= 2.8.1). */
+ if (i.operands == 2)
+ {
+ /* Reversed arguments on faddp, fsubp, etc. */
+ as_warn (_("translating to `%s %s%s,%s%s'"), i.tm.name,
+ register_prefix, i.op[!intel_syntax].regs->reg_name,
+ register_prefix, i.op[intel_syntax].regs->reg_name);
+ }
+ else
+ {
+ /* Extraneous `l' suffix on fp insn. */
+ as_warn (_("translating to `%s %s%s'"), i.tm.name,
+ register_prefix, i.op[0].regs->reg_name);
+ }
+ }
+ }
+ }
+ else if (i.tm.opcode_modifier.modrm)
+ {
+ /* The opcode is completed (modulo i.tm.extension_opcode which
+ must be put into the modrm byte). Now, we make the modrm and
+ index base bytes based on all the info we've collected. */
-static int
-disp_size (unsigned int n)
-{
- int size = 4;
- if (i.types[n] & (Disp8 | Disp16 | Disp64))
+ default_seg = build_modrm_byte ();
+ }
+ else if ((i.tm.base_opcode & ~0x3) == MOV_AX_DISP32)
{
- size = 2;
- if (i.types[n] & Disp8)
- size = 1;
- if (i.types[n] & Disp64)
- size = 8;
+ default_seg = &ds;
+ }
+ else if (i.tm.opcode_modifier.isstring)
+ {
+ /* For the string instructions that allow a segment override
+ on one of their operands, the default segment is ds. */
+ default_seg = &ds;
}
- return size;
-}
-/* Return the size of the immediate operand N. */
+ if (i.tm.base_opcode == 0x8d /* lea */
+ && i.seg[0]
+ && !quiet_warnings)
+ as_warn (_("segment override on `%s' is ineffectual"), i.tm.name);
-static int
-imm_size (unsigned int n)
-{
- int size = 4;
- if (i.types[n] & (Imm8 | Imm8S | Imm16 | Imm64))
+ /* If a segment was explicitly specified, and the specified segment
+ is not the default, use an opcode prefix to select it. If we
+ never figured out what the default segment is, then default_seg
+ will be zero at this point, and the specified segment prefix will
+ always be used. */
+ if ((i.seg[0]) && (i.seg[0] != default_seg))
{
- size = 2;
- if (i.types[n] & (Imm8 | Imm8S))
- size = 1;
- if (i.types[n] & Imm64)
- size = 8;
+ if (!add_prefix (i.seg[0]->seg_prefix))
+ return 0;
}
- return size;
+ return 1;
}
-static void
-output_disp (fragS *insn_start_frag, offsetT insn_start_off)
+static const seg_entry *
+build_modrm_byte (void)
{
- char *p;
- unsigned int n;
+ const seg_entry *default_seg = 0;
+ unsigned int source, dest;
+ int vex_3_sources;
- for (n = 0; n < i.operands; n++)
+ /* The first operand of instructions with VEX prefix and 3 sources
+ must be VEX_Imm4. */
+ vex_3_sources = i.tm.opcode_modifier.vex3sources;
+ if (vex_3_sources)
{
- if (i.types[n] & Disp)
+ unsigned int nds, reg;
+
+ if (i.tm.opcode_modifier.veximmext
+ && i.tm.opcode_modifier.immext)
{
- if (i.op[n].disps->X_op == O_constant)
- {
- int size = disp_size (n);
- offsetT val;
+ dest = i.operands - 2;
+ gas_assert (dest == 3);
+ }
+ else
+ dest = i.operands - 1;
+ nds = dest - 1;
+
+ /* This instruction must have 4 register operands
+ or 3 register operands plus 1 memory operand.
+ It must have VexNDS and VexImmExt. */
+ gas_assert ((i.reg_operands == 4
+ || (i.reg_operands == 3 && i.mem_operands == 1))
+ && i.tm.opcode_modifier.vexnds
+ && i.tm.opcode_modifier.veximmext
+ && (operand_type_equal (&i.tm.operand_types[dest], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[dest], ®ymm)));
+
+ /* Generate an 8bit immediate operand to encode the register
+ operand. */
+ expressionS *exp = &im_expressions[i.imm_operands++];
+ i.op[i.operands].imms = exp;
+ i.types[i.operands] = imm8;
+ i.operands++;
+ /* If VexW1 is set, the first operand is the source and
+ the second operand is encoded in the immediate operand. */
+ if (i.tm.opcode_modifier.vexw1)
+ {
+ source = 0;
+ reg = 1;
+ }
+ else
+ {
+ source = 1;
+ reg = 0;
+ }
+ /* FMA4 swaps REG and NDS. */
+ if (i.tm.cpu_flags.bitfield.cpufma4)
+ {
+ unsigned int tmp;
+ tmp = reg;
+ reg = nds;
+ nds = tmp;
+ }
+ gas_assert ((operand_type_equal (&i.tm.operand_types[reg], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[reg],
+ ®ymm))
+ && (operand_type_equal (&i.tm.operand_types[nds], ®xmm)
+ || operand_type_equal (&i.tm.operand_types[nds],
+ ®ymm)));
+ exp->X_op = O_constant;
+ exp->X_add_number
+ = ((i.op[reg].regs->reg_num
+ + ((i.op[reg].regs->reg_flags & RegRex) ? 8 : 0)) << 4);
+ i.vex.register_specifier = i.op[nds].regs;
+ }
+ else
+ source = dest = 0;
- val = offset_in_range (i.op[n].disps->X_add_number,
- size);
- p = frag_more (size);
- md_number_to_chars (p, val, size);
+ /* i.reg_operands MUST be the number of real register operands;
+ implicit registers do not count. If there are 3 register
+ operands, it must be a instruction with VexNDS. For a
+ instruction with VexNDD, the destination register is encoded
+ in VEX prefix. If there are 4 register operands, it must be
+ a instruction with VEX prefix and 3 sources. */
+ if (i.mem_operands == 0
+ && ((i.reg_operands == 2
+ && !i.tm.opcode_modifier.vexndd)
+ || (i.reg_operands == 3
+ && i.tm.opcode_modifier.vexnds)
+ || (i.reg_operands == 4 && vex_3_sources)))
+ {
+ switch (i.operands)
+ {
+ case 2:
+ source = 0;
+ break;
+ case 3:
+ /* When there are 3 operands, one of them may be immediate,
+ which may be the first or the last operand. Otherwise,
+ the first operand must be shift count register (cl) or it
+ is an instruction with VexNDS. */
+ gas_assert (i.imm_operands == 1
+ || (i.imm_operands == 0
+ && (i.tm.opcode_modifier.vexnds
+ || i.types[0].bitfield.shiftcount)));
+ if (operand_type_check (i.types[0], imm)
+ || i.types[0].bitfield.shiftcount)
+ source = 1;
+ else
+ source = 0;
+ break;
+ case 4:
+ /* When there are 4 operands, the first two must be 8bit
+ immediate operands. The source operand will be the 3rd
+ one.
+
+ For instructions with VexNDS, if the first operand
+ an imm8, the source operand is the 2nd one. If the last
+ operand is imm8, the source operand is the first one. */
+ gas_assert ((i.imm_operands == 2
+ && i.types[0].bitfield.imm8
+ && i.types[1].bitfield.imm8)
+ || (i.tm.opcode_modifier.vexnds
+ && i.imm_operands == 1
+ && (i.types[0].bitfield.imm8
+ || i.types[i.operands - 1].bitfield.imm8)));
+ if (i.tm.opcode_modifier.vexnds)
+ {
+ if (i.types[0].bitfield.imm8)
+ source = 1;
+ else
+ source = 0;
}
else
+ source = 2;
+ break;
+ case 5:
+ break;
+ default:
+ abort ();
+ }
+
+ if (!vex_3_sources)
+ {
+ dest = source + 1;
+
+ if (i.tm.opcode_modifier.vexnds)
{
- enum bfd_reloc_code_real reloc_type;
- int size = disp_size (n);
- int sign = (i.types[n] & Disp32S) != 0;
- int pcrel = (i.flags[n] & Operand_PCrel) != 0;
+ /* For instructions with VexNDS, the register-only
+ source operand must be XMM or YMM register. It is
+ encoded in VEX prefix. We need to clear RegMem bit
+ before calling operand_type_equal. */
+ i386_operand_type op = i.tm.operand_types[dest];
+ op.bitfield.regmem = 0;
+ if ((dest + 1) >= i.operands
+ || (!operand_type_equal (&op, ®xmm)
+ && !operand_type_equal (&op, ®ymm)))
+ abort ();
+ i.vex.register_specifier = i.op[dest].regs;
+ dest++;
+ }
+ }
- /* We can't have 8 bit displacement here. */
- assert ((i.types[n] & Disp8) == 0);
+ i.rm.mode = 3;
+ /* One of the register operands will be encoded in the i.tm.reg
+ field, the other in the combined i.tm.mode and i.tm.regmem
+ fields. If no form of this instruction supports a memory
+ destination operand, then we assume the source operand may
+ sometimes be a memory operand and so we need to store the
+ destination in the i.rm.reg field. */
+ if (!i.tm.operand_types[dest].bitfield.regmem
+ && operand_type_check (i.tm.operand_types[dest], anymem) == 0)
+ {
+ i.rm.reg = i.op[dest].regs->reg_num;
+ i.rm.regmem = i.op[source].regs->reg_num;
+ if ((i.op[dest].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_R;
+ if ((i.op[source].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ i.rm.reg = i.op[source].regs->reg_num;
+ i.rm.regmem = i.op[dest].regs->reg_num;
+ if ((i.op[dest].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ if ((i.op[source].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_R;
+ }
+ if (flag_code != CODE_64BIT && (i.rex & (REX_R | REX_B)))
+ {
+ if (!i.types[0].bitfield.control
+ && !i.types[1].bitfield.control)
+ abort ();
+ i.rex &= ~(REX_R | REX_B);
+ add_prefix (LOCK_PREFIX_OPCODE);
+ }
+ }
+ else
+ { /* If it's not 2 reg operands... */
+ unsigned int mem;
- /* The PC relative address is computed relative
- to the instruction boundary, so in case immediate
- fields follows, we need to adjust the value. */
- if (pcrel && i.imm_operands)
- {
- unsigned int n1;
- int sz = 0;
+ if (i.mem_operands)
+ {
+ unsigned int fake_zero_displacement = 0;
+ unsigned int op;
- for (n1 = 0; n1 < i.operands; n1++)
- if (i.types[n1] & Imm)
- {
- /* Only one immediate is allowed for PC
- relative address. */
- assert (sz == 0);
- sz = imm_size (n1);
- i.op[n].disps->X_add_number -= sz;
- }
- /* We should find the immediate. */
- assert (sz != 0);
- }
+ for (op = 0; op < i.operands; op++)
+ if (operand_type_check (i.types[op], anymem))
+ break;
+ gas_assert (op < i.operands);
- p = frag_more (size);
- reloc_type = reloc (size, pcrel, sign, i.reloc[n]);
- if (GOT_symbol
- && GOT_symbol == i.op[n].disps->X_add_symbol
- && (((reloc_type == BFD_RELOC_32
- || reloc_type == BFD_RELOC_X86_64_32S
- || (reloc_type == BFD_RELOC_64
- && object_64bit))
- && (i.op[n].disps->X_op == O_symbol
- || (i.op[n].disps->X_op == O_add
- && ((symbol_get_value_expression
- (i.op[n].disps->X_op_symbol)->X_op)
- == O_subtract))))
- || reloc_type == BFD_RELOC_32_PCREL))
- {
- offsetT add;
+ default_seg = &ds;
- if (insn_start_frag == frag_now)
- add = (p - frag_now->fr_literal) - insn_start_off;
- else
+ if (i.base_reg == 0)
+ {
+ i.rm.mode = 0;
+ if (!i.disp_operands)
+ fake_zero_displacement = 1;
+ if (i.index_reg == 0)
+ {
+ /* Operand is just <disp> */
+ if (flag_code == CODE_64BIT)
{
- fragS *fr;
-
- add = insn_start_frag->fr_fix - insn_start_off;
- for (fr = insn_start_frag->fr_next;
- fr && fr != frag_now; fr = fr->fr_next)
- add += fr->fr_fix;
- add += p - frag_now->fr_literal;
+ /* 64bit mode overwrites the 32bit absolute
+ addressing by RIP relative addressing and
+ absolute addressing is encoded by one of the
+ redundant SIB forms. */
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ i.sib.base = NO_BASE_REGISTER;
+ i.sib.index = NO_INDEX_REGISTER;
+ i.types[op] = ((i.prefix[ADDR_PREFIX] == 0)
+ ? disp32s : disp32);
}
-
- if (!object_64bit)
+ else if ((flag_code == CODE_16BIT)
+ ^ (i.prefix[ADDR_PREFIX] != 0))
{
- reloc_type = BFD_RELOC_386_GOTPC;
- i.op[n].imms->X_add_number += add;
+ i.rm.regmem = NO_BASE_REGISTER_16;
+ i.types[op] = disp16;
}
- else if (reloc_type == BFD_RELOC_64)
- reloc_type = BFD_RELOC_X86_64_GOTPC64;
else
- /* Don't do the adjustment for x86-64, as there
- the pcrel addressing is relative to the _next_
- insn, and that is taken care of in other code. */
- reloc_type = BFD_RELOC_X86_64_GOTPC32;
+ {
+ i.rm.regmem = NO_BASE_REGISTER;
+ i.types[op] = disp32;
+ }
+ }
+ else /* !i.base_reg && i.index_reg */
+ {
+ if (i.index_reg->reg_num == RegEiz
+ || i.index_reg->reg_num == RegRiz)
+ i.sib.index = NO_INDEX_REGISTER;
+ else
+ i.sib.index = i.index_reg->reg_num;
+ i.sib.base = NO_BASE_REGISTER;
+ i.sib.scale = i.log2_scale_factor;
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp64 = 0;
+ if (flag_code != CODE_64BIT)
+ {
+ /* Must be 32 bit */
+ i.types[op].bitfield.disp32 = 1;
+ i.types[op].bitfield.disp32s = 0;
+ }
+ else
+ {
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 1;
+ }
+ if ((i.index_reg->reg_flags & RegRex) != 0)
+ i.rex |= REX_X;
}
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[n].disps, pcrel, reloc_type);
}
- }
- }
-}
-
-static void
-output_imm (fragS *insn_start_frag, offsetT insn_start_off)
-{
- char *p;
- unsigned int n;
-
- for (n = 0; n < i.operands; n++)
- {
- if (i.types[n] & Imm)
- {
- if (i.op[n].imms->X_op == O_constant)
+ /* RIP addressing for 64bit mode. */
+ else if (i.base_reg->reg_num == RegRip ||
+ i.base_reg->reg_num == RegEip)
{
- int size = imm_size (n);
- offsetT val;
-
- val = offset_in_range (i.op[n].imms->X_add_number,
- size);
- p = frag_more (size);
- md_number_to_chars (p, val, size);
+ i.rm.regmem = NO_BASE_REGISTER;
+ i.types[op].bitfield.disp8 = 0;
+ i.types[op].bitfield.disp16 = 0;
+ i.types[op].bitfield.disp32 = 0;
+ i.types[op].bitfield.disp32s = 1;
+ i.types[op].bitfield.disp64 = 0;
+ i.flags[op] |= Operand_PCrel;
+ if (! i.disp_operands)
+ fake_zero_displacement = 1;
}
- else
+ else if (i.base_reg->reg_type.bitfield.reg16)
{
- /* Not absolute_section.
- Need a 32-bit fixup (don't support 8bit
- non-absolute imms). Try to support other
- sizes ... */
- enum bfd_reloc_code_real reloc_type;
- int size = imm_size (n);
- int sign;
+ switch (i.base_reg->reg_num)
+ {
+ case 3: /* (%bx) */
+ if (i.index_reg == 0)
+ i.rm.regmem = 7;
+ else /* (%bx,%si) -> 0, or (%bx,%di) -> 1 */
+ i.rm.regmem = i.index_reg->reg_num - 6;
+ break;
+ case 5: /* (%bp) */
+ default_seg = &ss;
+ if (i.index_reg == 0)
+ {
+ i.rm.regmem = 6;
+ if (operand_type_check (i.types[op], disp) == 0)
+ {
+ /* fake (%bp) into 0(%bp) */
+ i.types[op].bitfield.disp8 = 1;
+ fake_zero_displacement = 1;
+ }
+ }
+ else /* (%bp,%si) -> 2, or (%bp,%di) -> 3 */
+ i.rm.regmem = i.index_reg->reg_num - 6 + 2;
+ break;
+ default: /* (%si) -> 4 or (%di) -> 5 */
+ i.rm.regmem = i.base_reg->reg_num - 6 + 4;
+ }
+ i.rm.mode = mode_from_disp_size (i.types[op]);
+ }
+ else /* i.base_reg and 32/64 bit mode */
+ {
+ if (flag_code == CODE_64BIT
+ && operand_type_check (i.types[op], disp))
+ {
+ i386_operand_type temp;
+ operand_type_set (&temp, 0);
+ temp.bitfield.disp8 = i.types[op].bitfield.disp8;
+ i.types[op] = temp;
+ if (i.prefix[ADDR_PREFIX] == 0)
+ i.types[op].bitfield.disp32s = 1;
+ else
+ i.types[op].bitfield.disp32 = 1;
+ }
- if ((i.types[n] & (Imm32S))
- && (i.suffix == QWORD_MNEM_SUFFIX
- || (!i.suffix && (i.tm.opcode_modifier & No_lSuf))))
- sign = 1;
+ i.rm.regmem = i.base_reg->reg_num;
+ if ((i.base_reg->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ i.sib.base = i.base_reg->reg_num;
+ /* x86-64 ignores REX prefix bit here to avoid decoder
+ complications. */
+ if ((i.base_reg->reg_num & 7) == EBP_REG_NUM)
+ {
+ default_seg = &ss;
+ if (i.disp_operands == 0)
+ {
+ fake_zero_displacement = 1;
+ i.types[op].bitfield.disp8 = 1;
+ }
+ }
+ else if (i.base_reg->reg_num == ESP_REG_NUM)
+ {
+ default_seg = &ss;
+ }
+ i.sib.scale = i.log2_scale_factor;
+ if (i.index_reg == 0)
+ {
+ /* <disp>(%esp) becomes two byte modrm with no index
+ register. We've already stored the code for esp
+ in i.rm.regmem ie. ESCAPE_TO_TWO_BYTE_ADDRESSING.
+ Any base register besides %esp will not use the
+ extra modrm byte. */
+ i.sib.index = NO_INDEX_REGISTER;
+ }
else
- sign = 0;
-
- p = frag_more (size);
- reloc_type = reloc (size, 0, sign, i.reloc[n]);
-
- /* This is tough to explain. We end up with this one if we
- * have operands that look like
- * "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal here is to
- * obtain the absolute address of the GOT, and it is strongly
- * preferable from a performance point of view to avoid using
- * a runtime relocation for this. The actual sequence of
- * instructions often look something like:
- *
- * call .L66
- * .L66:
- * popl %ebx
- * addl $_GLOBAL_OFFSET_TABLE_+[.-.L66],%ebx
- *
- * The call and pop essentially return the absolute address
- * of the label .L66 and store it in %ebx. The linker itself
- * will ultimately change the first operand of the addl so
- * that %ebx points to the GOT, but to keep things simple, the
- * .o file must have this operand set so that it generates not
- * the absolute address of .L66, but the absolute address of
- * itself. This allows the linker itself simply treat a GOTPC
- * relocation as asking for a pcrel offset to the GOT to be
- * added in, and the addend of the relocation is stored in the
- * operand field for the instruction itself.
- *
- * Our job here is to fix the operand so that it would add
- * the correct offset so that %ebx would point to itself. The
- * thing that is tricky is that .-.L66 will point to the
- * beginning of the instruction, so we need to further modify
- * the operand so that it will point to itself. There are
- * other cases where you have something like:
- *
- * .long $_GLOBAL_OFFSET_TABLE_+[.-.L66]
- *
- * and here no correction would be required. Internally in
- * the assembler we treat operands of this form as not being
- * pcrel since the '.' is explicitly mentioned, and I wonder
- * whether it would simplify matters to do it this way. Who
- * knows. In earlier versions of the PIC patches, the
- * pcrel_adjust field was used to store the correction, but
- * since the expression is not pcrel, I felt it would be
- * confusing to do it this way. */
-
- if ((reloc_type == BFD_RELOC_32
- || reloc_type == BFD_RELOC_X86_64_32S
- || reloc_type == BFD_RELOC_64)
- && GOT_symbol
- && GOT_symbol == i.op[n].imms->X_add_symbol
- && (i.op[n].imms->X_op == O_symbol
- || (i.op[n].imms->X_op == O_add
- && ((symbol_get_value_expression
- (i.op[n].imms->X_op_symbol)->X_op)
- == O_subtract))))
{
- offsetT add;
-
- if (insn_start_frag == frag_now)
- add = (p - frag_now->fr_literal) - insn_start_off;
+ if (i.index_reg->reg_num == RegEiz
+ || i.index_reg->reg_num == RegRiz)
+ i.sib.index = NO_INDEX_REGISTER;
else
- {
- fragS *fr;
+ i.sib.index = i.index_reg->reg_num;
+ i.rm.regmem = ESCAPE_TO_TWO_BYTE_ADDRESSING;
+ if ((i.index_reg->reg_flags & RegRex) != 0)
+ i.rex |= REX_X;
+ }
- add = insn_start_frag->fr_fix - insn_start_off;
- for (fr = insn_start_frag->fr_next;
- fr && fr != frag_now; fr = fr->fr_next)
- add += fr->fr_fix;
- add += p - frag_now->fr_literal;
- }
+ if (i.disp_operands
+ && (i.reloc[op] == BFD_RELOC_386_TLS_DESC_CALL
+ || i.reloc[op] == BFD_RELOC_X86_64_TLSDESC_CALL))
+ i.rm.mode = 0;
+ else
+ i.rm.mode = mode_from_disp_size (i.types[op]);
+ }
- if (!object_64bit)
- reloc_type = BFD_RELOC_386_GOTPC;
- else if (size == 4)
- reloc_type = BFD_RELOC_X86_64_GOTPC32;
- else if (size == 8)
- reloc_type = BFD_RELOC_X86_64_GOTPC64;
- i.op[n].imms->X_add_number += add;
- }
- fix_new_exp (frag_now, p - frag_now->fr_literal, size,
- i.op[n].imms, 0, reloc_type);
+ if (fake_zero_displacement)
+ {
+ /* Fakes a zero displacement assuming that i.types[op]
+ holds the correct displacement size. */
+ expressionS *exp;
+
+ gas_assert (i.op[op].disps == 0);
+ exp = &disp_expressions[i.disp_operands++];
+ i.op[op].disps = exp;
+ exp->X_op = O_constant;
+ exp->X_add_number = 0;
+ exp->X_add_symbol = (symbolS *) 0;
+ exp->X_op_symbol = (symbolS *) 0;
}
- }
- }
-}
-\f
-/* x86_cons_fix_new is called via the expression parsing code when a
- reloc is needed. We use this hook to get the correct .got reloc. */
-static enum bfd_reloc_code_real got_reloc = NO_RELOC;
-static int cons_sign = -1;
-void
-x86_cons_fix_new (fragS *frag, unsigned int off, unsigned int len,
- expressionS *exp)
-{
- enum bfd_reloc_code_real r = reloc (len, 0, cons_sign, got_reloc);
+ mem = op;
+ }
+ else
+ mem = ~0;
- got_reloc = NO_RELOC;
+ /* Fill in i.rm.reg or i.rm.regmem field with register operand
+ (if any) based on i.tm.extension_opcode. Again, we must be
+ careful to make sure that segment/control/debug/test/MMX
+ registers are coded into the i.rm.reg field. */
+ if (i.reg_operands)
+ {
+ unsigned int op;
+ unsigned int vex_reg = ~0;
-#ifdef TE_PE
- if (exp->X_op == O_secrel)
- {
- exp->X_op = O_symbol;
- r = BFD_RELOC_32_SECREL;
- }
-#endif
+ for (op = 0; op < i.operands; op++)
+ if (i.types[op].bitfield.reg8
+ || i.types[op].bitfield.reg16
+ || i.types[op].bitfield.reg32
+ || i.types[op].bitfield.reg64
+ || i.types[op].bitfield.regmmx
+ || i.types[op].bitfield.regxmm
+ || i.types[op].bitfield.regymm
+ || i.types[op].bitfield.sreg2
+ || i.types[op].bitfield.sreg3
+ || i.types[op].bitfield.control
+ || i.types[op].bitfield.debug
+ || i.types[op].bitfield.test)
+ break;
- fix_new_exp (frag, off, len, exp, 0, r);
-}
+ if (vex_3_sources)
+ op = dest;
+ else if (i.tm.opcode_modifier.vexnds)
+ {
+ /* For instructions with VexNDS, the register-only
+ source operand is encoded in VEX prefix. */
+ gas_assert (mem != (unsigned int) ~0);
-#if (!defined (OBJ_ELF) && !defined (OBJ_MAYBE_ELF)) || defined (LEX_AT)
-# define lex_got(reloc, adjust, types) NULL
-#else
-/* Parse operands of the form
- <symbol>@GOTOFF+<nnn>
- and similar .plt or .got references.
-
- If we find one, set up the correct relocation in RELOC and copy the
- input string, minus the `@GOTOFF' into a malloc'd buffer for
- parsing by the calling routine. Return this buffer, and if ADJUST
- is non-null set it to the length of the string we removed from the
- input line. Otherwise return NULL. */
-static char *
-lex_got (enum bfd_reloc_code_real *reloc,
- int *adjust,
- unsigned int *types)
-{
- /* Some of the relocations depend on the size of what field is to
- be relocated. But in our callers i386_immediate and i386_displacement
- we don't yet know the operand size (this will be set by insn
- matching). Hence we record the word32 relocation here,
- and adjust the reloc according to the real size in reloc(). */
- static const struct {
- const char *str;
- const enum bfd_reloc_code_real rel[2];
- const unsigned int types64;
- } gotrel[] = {
- { "PLTOFF", { 0,
- BFD_RELOC_X86_64_PLTOFF64 },
- Imm64 },
- { "PLT", { BFD_RELOC_386_PLT32,
- BFD_RELOC_X86_64_PLT32 },
- Imm32 | Imm32S | Disp32 },
- { "GOTPLT", { 0,
- BFD_RELOC_X86_64_GOTPLT64 },
- Imm64 | Disp64 },
- { "GOTOFF", { BFD_RELOC_386_GOTOFF,
- BFD_RELOC_X86_64_GOTOFF64 },
- Imm64 | Disp64 },
- { "GOTPCREL", { 0,
- BFD_RELOC_X86_64_GOTPCREL },
- Imm32 | Imm32S | Disp32 },
- { "TLSGD", { BFD_RELOC_386_TLS_GD,
- BFD_RELOC_X86_64_TLSGD },
- Imm32 | Imm32S | Disp32 },
- { "TLSLDM", { BFD_RELOC_386_TLS_LDM,
- 0 },
- 0 },
- { "TLSLD", { 0,
- BFD_RELOC_X86_64_TLSLD },
- Imm32 | Imm32S | Disp32 },
- { "GOTTPOFF", { BFD_RELOC_386_TLS_IE_32,
- BFD_RELOC_X86_64_GOTTPOFF },
- Imm32 | Imm32S | Disp32 },
- { "TPOFF", { BFD_RELOC_386_TLS_LE_32,
- BFD_RELOC_X86_64_TPOFF32 },
- Imm32 | Imm32S | Imm64 | Disp32 | Disp64 },
- { "NTPOFF", { BFD_RELOC_386_TLS_LE,
- 0 },
- 0 },
- { "DTPOFF", { BFD_RELOC_386_TLS_LDO_32,
- BFD_RELOC_X86_64_DTPOFF32 },
- Imm32 | Imm32S | Imm64 | Disp32 | Disp64 },
- { "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE,
- 0 },
- 0 },
- { "INDNTPOFF",{ BFD_RELOC_386_TLS_IE,
- 0 },
- 0 },
- { "GOT", { BFD_RELOC_386_GOT32,
- BFD_RELOC_X86_64_GOT32 },
- Imm32 | Imm32S | Disp32 | Imm64 },
- { "TLSDESC", { BFD_RELOC_386_TLS_GOTDESC,
- BFD_RELOC_X86_64_GOTPC32_TLSDESC },
- Imm32 | Imm32S | Disp32 },
- { "TLSCALL", { BFD_RELOC_386_TLS_DESC_CALL,
- BFD_RELOC_X86_64_TLSDESC_CALL },
- Imm32 | Imm32S | Disp32 }
- };
- char *cp;
- unsigned int j;
-
- if (!IS_ELF)
- return NULL;
-
- for (cp = input_line_pointer; *cp != '@'; cp++)
- if (is_end_of_line[(unsigned char) *cp] || *cp == ',')
- return NULL;
-
- for (j = 0; j < sizeof (gotrel) / sizeof (gotrel[0]); j++)
- {
- int len;
-
- len = strlen (gotrel[j].str);
- if (strncasecmp (cp + 1, gotrel[j].str, len) == 0)
- {
- if (gotrel[j].rel[object_64bit] != 0)
- {
- int first, second;
- char *tmpbuf, *past_reloc;
-
- *reloc = gotrel[j].rel[object_64bit];
- if (adjust)
- *adjust = len;
-
- if (types)
+ if (op > mem)
{
- if (flag_code != CODE_64BIT)
- *types = Imm32 | Disp32;
- else
- *types = gotrel[j].types64;
+ vex_reg = op++;
+ gas_assert (op < i.operands);
}
+ else
+ {
+ vex_reg = op + 1;
+ gas_assert (vex_reg < i.operands);
+ }
+ }
+ else if (i.tm.opcode_modifier.vexndd)
+ {
+ /* For instructions with VexNDD, there should be
+ no memory operand and the register destination
+ is encoded in VEX prefix. */
+ gas_assert (i.mem_operands == 0
+ && (op + 2) == i.operands);
+ vex_reg = op + 1;
+ }
+ else
+ gas_assert (op < i.operands);
- if (GOT_symbol == NULL)
- GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
-
- /* The length of the first part of our input line. */
- first = cp - input_line_pointer;
-
- /* The second part goes from after the reloc token until
- (and including) an end_of_line char or comma. */
- past_reloc = cp + 1 + len;
- cp = past_reloc;
- while (!is_end_of_line[(unsigned char) *cp] && *cp != ',')
- ++cp;
- second = cp + 1 - past_reloc;
+ if (vex_reg != (unsigned int) ~0)
+ {
+ gas_assert (i.reg_operands == 2);
+
+ if (!operand_type_equal (&i.tm.operand_types[vex_reg],
+ & regxmm)
+ && !operand_type_equal (&i.tm.operand_types[vex_reg],
+ ®ymm))
+ abort ();
+ i.vex.register_specifier = i.op[vex_reg].regs;
+ }
- /* Allocate and copy string. The trailing NUL shouldn't
- be necessary, but be safe. */
- tmpbuf = xmalloc (first + second + 2);
- memcpy (tmpbuf, input_line_pointer, first);
- if (second != 0 && *past_reloc != ' ')
- /* Replace the relocation token with ' ', so that
- errors like foo@GOTOFF1 will be detected. */
- tmpbuf[first++] = ' ';
- memcpy (tmpbuf + first, past_reloc, second);
- tmpbuf[first + second] = '\0';
- return tmpbuf;
+ /* If there is an extension opcode to put here, the
+ register number must be put into the regmem field. */
+ if (i.tm.extension_opcode != None)
+ {
+ i.rm.regmem = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_B;
+ }
+ else
+ {
+ i.rm.reg = i.op[op].regs->reg_num;
+ if ((i.op[op].regs->reg_flags & RegRex) != 0)
+ i.rex |= REX_R;
}
- as_bad (_("@%s reloc is not supported with %d-bit output format"),
- gotrel[j].str, 1 << (5 + object_64bit));
- return NULL;
+ /* Now, if no memory operand has set i.rm.mode = 0, 1, 2 we
+ must set it to 3 to indicate this is a register operand
+ in the regmem field. */
+ if (!i.mem_operands)
+ i.rm.mode = 3;
}
- }
- /* Might be a symbol version string. Don't as_bad here. */
- return NULL;
+ /* Fill in i.rm.reg field with extension opcode (if any). */
+ if (i.tm.extension_opcode != None)
+ i.rm.reg = i.tm.extension_opcode;
+ }
+ return default_seg;
}
-void
-x86_cons (expressionS *exp, int size)
+static void
+output_branch (void)
{
- if (size == 4 || (object_64bit && size == 8))
+ char *p;
+ int code16;
+ int prefix;
+ relax_substateT subtype;
+ symbolS *sym;
+ offsetT off;
+
+ code16 = 0;
+ if (flag_code == CODE_16BIT)
+ code16 = CODE16;
+
+ prefix = 0;
+ if (i.prefix[DATA_PREFIX] != 0)
{
- /* Handle @GOTOFF and the like in an expression. */
- char *save;
- char *gotfree_input_line;
- int adjust;
+ prefix = 1;
+ i.prefixes -= 1;
+ code16 ^= CODE16;
+ }
+ /* Pentium4 branch hints. */
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
+ {
+ prefix++;
+ i.prefixes--;
+ }
+ if (i.prefix[REX_PREFIX] != 0)
+ {
+ prefix++;
+ i.prefixes--;
+ }
- save = input_line_pointer;
- gotfree_input_line = lex_got (&got_reloc, &adjust, NULL);
- if (gotfree_input_line)
- input_line_pointer = gotfree_input_line;
+ if (i.prefixes != 0 && !intel_syntax)
+ as_warn (_("skipping prefixes on this instruction"));
- expression (exp);
+ /* It's always a symbol; End frag & setup for relax.
+ Make sure there is enough room in this frag for the largest
+ instruction we may generate in md_convert_frag. This is 2
+ bytes for the opcode and room for the prefix and largest
+ displacement. */
+ frag_grow (prefix + 2 + 4);
+ /* Prefix and 1 opcode byte go in fr_fix. */
+ p = frag_more (prefix + 1);
+ if (i.prefix[DATA_PREFIX] != 0)
+ *p++ = DATA_PREFIX_OPCODE;
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE)
+ *p++ = i.prefix[SEG_PREFIX];
+ if (i.prefix[REX_PREFIX] != 0)
+ *p++ = i.prefix[REX_PREFIX];
+ *p = i.tm.base_opcode;
- if (gotfree_input_line)
- {
- /* expression () has merrily parsed up to the end of line,
- or a comma - in the wrong buffer. Transfer how far
- input_line_pointer has moved to the right buffer. */
- input_line_pointer = (save
- + (input_line_pointer - gotfree_input_line)
- + adjust);
- free (gotfree_input_line);
- }
- }
+ if ((unsigned char) *p == JUMP_PC_RELATIVE)
+ subtype = ENCODE_RELAX_STATE (UNCOND_JUMP, SMALL);
+ else if (cpu_arch_flags.bitfield.cpui386)
+ subtype = ENCODE_RELAX_STATE (COND_JUMP, SMALL);
else
- expression (exp);
-}
-#endif
-
-static void signed_cons (int size)
-{
- if (flag_code == CODE_64BIT)
- cons_sign = 1;
- cons (size);
- cons_sign = -1;
-}
+ subtype = ENCODE_RELAX_STATE (COND_JUMP86, SMALL);
+ subtype |= code16;
-#ifdef TE_PE
-static void
-pe_directive_secrel (dummy)
- int dummy ATTRIBUTE_UNUSED;
-{
- expressionS exp;
+ sym = i.op[0].disps->X_add_symbol;
+ off = i.op[0].disps->X_add_number;
- do
+ if (i.op[0].disps->X_op != O_constant
+ && i.op[0].disps->X_op != O_symbol)
{
- expression (&exp);
- if (exp.X_op == O_symbol)
- exp.X_op = O_secrel;
-
- emit_expr (&exp, 4);
+ /* Handle complex expressions. */
+ sym = make_expr_symbol (i.op[0].disps);
+ off = 0;
}
- while (*input_line_pointer++ == ',');
- input_line_pointer--;
- demand_empty_rest_of_line ();
+ /* 1 possible extra opcode + 4 byte displacement go in var part.
+ Pass reloc in fr_var. */
+ frag_var (rs_machine_dependent, 5, i.reloc[0], subtype, sym, off, p);
}
-#endif
-static int
-i386_immediate (char *imm_start)
+static void
+output_jump (void)
{
- char *save_input_line_pointer;
- char *gotfree_input_line;
- segT exp_seg = 0;
- expressionS *exp;
- unsigned int types = ~0U;
+ char *p;
+ int size;
+ fixS *fixP;
- if (i.imm_operands == MAX_IMMEDIATE_OPERANDS)
+ if (i.tm.opcode_modifier.jumpbyte)
{
- as_bad (_("at most %d immediate operands are allowed"),
- MAX_IMMEDIATE_OPERANDS);
- return 0;
+ /* This is a loop or jecxz type instruction. */
+ size = 1;
+ if (i.prefix[ADDR_PREFIX] != 0)
+ {
+ FRAG_APPEND_1_CHAR (ADDR_PREFIX_OPCODE);
+ i.prefixes -= 1;
+ }
+ /* Pentium4 branch hints. */
+ if (i.prefix[SEG_PREFIX] == CS_PREFIX_OPCODE /* not taken */
+ || i.prefix[SEG_PREFIX] == DS_PREFIX_OPCODE /* taken */)
+ {
+ FRAG_APPEND_1_CHAR (i.prefix[SEG_PREFIX]);
+ i.prefixes--;
+ }
}
+ else
+ {
+ int code16;
- exp = &im_expressions[i.imm_operands++];
- i.op[this_operand].imms = exp;
-
- if (is_space_char (*imm_start))
- ++imm_start;
+ code16 = 0;
+ if (flag_code == CODE_16BIT)
+ code16 = CODE16;
- save_input_line_pointer = input_line_pointer;
- input_line_pointer = imm_start;
+ if (i.prefix[DATA_PREFIX] != 0)
+ {
+ FRAG_APPEND_1_CHAR (DATA_PREFIX_OPCODE);
+ i.prefixes -= 1;
+ code16 ^= CODE16;
+ }
- gotfree_input_line = lex_got (&i.reloc[this_operand], NULL, &types);
- if (gotfree_input_line)
- input_line_pointer = gotfree_input_line;
+ size = 4;
+ if (code16)
+ size = 2;
+ }
- exp_seg = expression (exp);
+ if (i.prefix[REX_PREFIX] != 0)
+ {
+ FRAG_APPEND_1_CHAR (i.prefix[REX_PREFIX]);
+ i.prefixes -= 1;
+ }
- SKIP_WHITESPACE ();
- if (*input_line_pointer)
- as_bad (_("junk `%s' after expression"), input_line_pointer);
+ if (i.prefixes != 0 && !intel_syntax)
+ as_warn (_("skipping prefixes on this instruction"));
- input_line_pointer = save_input_line_pointer;
- if (gotfree_input_line)
- free (gotfree_input_line);
+ p = frag_more (1 + size);
+ *p++ = i.tm.base_opcode;
- if (exp->X_op == O_absent || exp->X_op == O_big)
- {
- /* Missing or bad expr becomes absolute 0. */
- as_bad (_("missing or invalid immediate expression `%s' taken as 0"),
- imm_start);
- exp->X_op = O_constant;
- exp->X_add_number = 0;
- exp->X_add_symbol = (symbolS *) 0;
- exp->X_op_symbol = (symbolS *) 0;
- }
- else if (exp->X_op == O_constant)
- {
- /* Size it properly later. */
- i.types[this_operand] |= Imm64;
- /* If BFD64, sign extend val. */
- if (!use_rela_relocations
- && (exp->X_add_number & ~(((addressT) 2 << 31) - 1)) == 0)
- exp->X_add_number
- = (exp->X_add_number ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
- }
-#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
- else if (OUTPUT_FLAVOR == bfd_target_aout_flavour
- && exp_seg != absolute_section
- && exp_seg != text_section
- && exp_seg != data_section
- && exp_seg != bss_section
- && exp_seg != undefined_section
- && !bfd_is_com_section (exp_seg))
- {
- as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
- return 0;
- }
-#endif
- else if (!intel_syntax && exp->X_op == O_register)
- {
- as_bad (_("illegal immediate register operand %s"), imm_start);
- return 0;
- }
- else
- {
- /* This is an address. The size of the address will be
- determined later, depending on destination register,
- suffix, or the default for the section. */
- i.types[this_operand] |= Imm8 | Imm16 | Imm32 | Imm32S | Imm64;
- i.types[this_operand] &= types;
- }
+ fixP = fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[0].disps, 1, reloc (size, 1, 1, i.reloc[0]));
- return 1;
+ /* All jumps handled here are signed, but don't use a signed limit
+ check for 32 and 16 bit jumps as we want to allow wrap around at
+ 4G and 64k respectively. */
+ if (size == 1)
+ fixP->fx_signed = 1;
}
-static char *
-i386_scale (char *scale)
+static void
+output_interseg_jump (void)
{
- offsetT val;
- char *save = input_line_pointer;
+ char *p;
+ int size;
+ int prefix;
+ int code16;
- input_line_pointer = scale;
- val = get_absolute_expression ();
+ code16 = 0;
+ if (flag_code == CODE_16BIT)
+ code16 = CODE16;
- switch (val)
+ prefix = 0;
+ if (i.prefix[DATA_PREFIX] != 0)
{
- case 1:
- i.log2_scale_factor = 0;
- break;
- case 2:
- i.log2_scale_factor = 1;
- break;
- case 4:
- i.log2_scale_factor = 2;
- break;
- case 8:
- i.log2_scale_factor = 3;
- break;
- default:
- {
- char sep = *input_line_pointer;
-
- *input_line_pointer = '\0';
- as_bad (_("expecting scale factor of 1, 2, 4, or 8: got `%s'"),
- scale);
- *input_line_pointer = sep;
- input_line_pointer = save;
- return NULL;
- }
+ prefix = 1;
+ i.prefixes -= 1;
+ code16 ^= CODE16;
}
- if (i.log2_scale_factor != 0 && i.index_reg == 0)
+ if (i.prefix[REX_PREFIX] != 0)
{
- as_warn (_("scale factor of %d without an index register"),
- 1 << i.log2_scale_factor);
-#if SCALE1_WHEN_NO_INDEX
- i.log2_scale_factor = 0;
-#endif
+ prefix++;
+ i.prefixes -= 1;
}
- scale = input_line_pointer;
- input_line_pointer = save;
- return scale;
-}
-static int
-i386_displacement (char *disp_start, char *disp_end)
-{
- expressionS *exp;
- segT exp_seg = 0;
- char *save_input_line_pointer;
- char *gotfree_input_line;
- int bigdisp, override;
- unsigned int types = Disp;
+ size = 4;
+ if (code16)
+ size = 2;
- if (i.disp_operands == MAX_MEMORY_OPERANDS)
- {
- as_bad (_("at most %d displacement operands are allowed"),
- MAX_MEMORY_OPERANDS);
- return 0;
- }
+ if (i.prefixes != 0 && !intel_syntax)
+ as_warn (_("skipping prefixes on this instruction"));
- if ((i.types[this_operand] & JumpAbsolute)
- || !(current_templates->start->opcode_modifier & (Jump | JumpDword)))
- {
- bigdisp = Disp32;
- override = (i.prefix[ADDR_PREFIX] != 0);
- }
- else
- {
- /* For PC-relative branches, the width of the displacement
- is dependent upon data size, not address size. */
- bigdisp = 0;
- override = (i.prefix[DATA_PREFIX] != 0);
- }
- if (flag_code == CODE_64BIT)
- {
- if (!bigdisp)
- bigdisp = ((override || i.suffix == WORD_MNEM_SUFFIX)
- ? Disp16
- : Disp32S | Disp32);
- else if (!override)
- bigdisp = Disp64 | Disp32S | Disp32;
- }
- else
+ /* 1 opcode; 2 segment; offset */
+ p = frag_more (prefix + 1 + 2 + size);
+
+ if (i.prefix[DATA_PREFIX] != 0)
+ *p++ = DATA_PREFIX_OPCODE;
+
+ if (i.prefix[REX_PREFIX] != 0)
+ *p++ = i.prefix[REX_PREFIX];
+
+ *p++ = i.tm.base_opcode;
+ if (i.op[1].imms->X_op == O_constant)
{
- if (!bigdisp)
+ offsetT n = i.op[1].imms->X_add_number;
+
+ if (size == 2
+ && !fits_in_unsigned_word (n)
+ && !fits_in_signed_word (n))
{
- if (!override)
- override = (i.suffix == (flag_code != CODE_16BIT
- ? WORD_MNEM_SUFFIX
- : LONG_MNEM_SUFFIX));
- bigdisp = Disp32;
+ as_bad (_("16-bit jump out of range"));
+ return;
}
- if ((flag_code == CODE_16BIT) ^ override)
- bigdisp = Disp16;
+ md_number_to_chars (p, n, size);
}
- i.types[this_operand] |= bigdisp;
+ else
+ fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[1].imms, 0, reloc (size, 0, 0, i.reloc[1]));
+ if (i.op[0].imms->X_op != O_constant)
+ as_bad (_("can't handle non absolute segment in `%s'"),
+ i.tm.name);
+ md_number_to_chars (p + size, (valueT) i.op[0].imms->X_add_number, 2);
+}
- exp = &disp_expressions[i.disp_operands];
- i.op[this_operand].disps = exp;
- i.disp_operands++;
- save_input_line_pointer = input_line_pointer;
- input_line_pointer = disp_start;
- END_STRING_AND_SAVE (disp_end);
+static void
+output_insn (void)
+{
+ fragS *insn_start_frag;
+ offsetT insn_start_off;
-#ifndef GCC_ASM_O_HACK
-#define GCC_ASM_O_HACK 0
-#endif
-#if GCC_ASM_O_HACK
- END_STRING_AND_SAVE (disp_end + 1);
- if ((i.types[this_operand] & BaseIndex) != 0
- && displacement_string_end[-1] == '+')
- {
- /* This hack is to avoid a warning when using the "o"
- constraint within gcc asm statements.
- For instance:
+ /* Tie dwarf2 debug info to the address at the start of the insn.
+ We can't do this after the insn has been output as the current
+ frag may have been closed off. eg. by frag_var. */
+ dwarf2_emit_insn (0);
- #define _set_tssldt_desc(n,addr,limit,type) \
- __asm__ __volatile__ ( \
- "movw %w2,%0\n\t" \
- "movw %w1,2+%0\n\t" \
- "rorl $16,%1\n\t" \
- "movb %b1,4+%0\n\t" \
- "movb %4,5+%0\n\t" \
- "movb $0,6+%0\n\t" \
- "movb %h1,7+%0\n\t" \
- "rorl $16,%1" \
- : "=o"(*(n)) : "q" (addr), "ri"(limit), "i"(type))
+ insn_start_frag = frag_now;
+ insn_start_off = frag_now_fix ();
- This works great except that the output assembler ends
- up looking a bit weird if it turns out that there is
- no offset. You end up producing code that looks like:
+ /* Output jumps. */
+ if (i.tm.opcode_modifier.jump)
+ output_branch ();
+ else if (i.tm.opcode_modifier.jumpbyte
+ || i.tm.opcode_modifier.jumpdword)
+ output_jump ();
+ else if (i.tm.opcode_modifier.jumpintersegment)
+ output_interseg_jump ();
+ else
+ {
+ /* Output normal instructions here. */
+ char *p;
+ unsigned char *q;
+ unsigned int j;
+ unsigned int prefix;
- #APP
- movw $235,(%eax)
- movw %dx,2+(%eax)
- rorl $16,%edx
- movb %dl,4+(%eax)
- movb $137,5+(%eax)
- movb $0,6+(%eax)
- movb %dh,7+(%eax)
- rorl $16,%edx
- #NO_APP
+ /* Since the VEX prefix contains the implicit prefix, we don't
+ need the explicit prefix. */
+ if (!i.tm.opcode_modifier.vex)
+ {
+ switch (i.tm.opcode_length)
+ {
+ case 3:
+ if (i.tm.base_opcode & 0xff000000)
+ {
+ prefix = (i.tm.base_opcode >> 24) & 0xff;
+ goto check_prefix;
+ }
+ break;
+ case 2:
+ if ((i.tm.base_opcode & 0xff0000) != 0)
+ {
+ prefix = (i.tm.base_opcode >> 16) & 0xff;
+ if (i.tm.cpu_flags.bitfield.cpupadlock)
+ {
+check_prefix:
+ if (prefix != REPE_PREFIX_OPCODE
+ || (i.prefix[LOCKREP_PREFIX]
+ != REPE_PREFIX_OPCODE))
+ add_prefix (prefix);
+ }
+ else
+ add_prefix (prefix);
+ }
+ break;
+ case 1:
+ break;
+ default:
+ abort ();
+ }
- So here we provide the missing zero. */
+ /* The prefix bytes. */
+ for (j = ARRAY_SIZE (i.prefix), q = i.prefix; j > 0; j--, q++)
+ if (*q)
+ FRAG_APPEND_1_CHAR (*q);
+ }
- *displacement_string_end = '0';
- }
-#endif
- gotfree_input_line = lex_got (&i.reloc[this_operand], NULL, &types);
- if (gotfree_input_line)
- input_line_pointer = gotfree_input_line;
+ if (i.tm.opcode_modifier.vex)
+ {
+ for (j = 0, q = i.prefix; j < ARRAY_SIZE (i.prefix); j++, q++)
+ if (*q)
+ switch (j)
+ {
+ case REX_PREFIX:
+ /* REX byte is encoded in VEX prefix. */
+ break;
+ case SEG_PREFIX:
+ case ADDR_PREFIX:
+ FRAG_APPEND_1_CHAR (*q);
+ break;
+ default:
+ /* There should be no other prefixes for instructions
+ with VEX prefix. */
+ abort ();
+ }
- exp_seg = expression (exp);
+ /* Now the VEX prefix. */
+ p = frag_more (i.vex.length);
+ for (j = 0; j < i.vex.length; j++)
+ p[j] = i.vex.bytes[j];
+ }
- SKIP_WHITESPACE ();
- if (*input_line_pointer)
- as_bad (_("junk `%s' after expression"), input_line_pointer);
-#if GCC_ASM_O_HACK
- RESTORE_END_STRING (disp_end + 1);
-#endif
- RESTORE_END_STRING (disp_end);
- input_line_pointer = save_input_line_pointer;
- if (gotfree_input_line)
- free (gotfree_input_line);
+ /* Now the opcode; be careful about word order here! */
+ if (i.tm.opcode_length == 1)
+ {
+ FRAG_APPEND_1_CHAR (i.tm.base_opcode);
+ }
+ else
+ {
+ switch (i.tm.opcode_length)
+ {
+ case 3:
+ p = frag_more (3);
+ *p++ = (i.tm.base_opcode >> 16) & 0xff;
+ break;
+ case 2:
+ p = frag_more (2);
+ break;
+ default:
+ abort ();
+ break;
+ }
- /* We do this to make sure that the section symbol is in
- the symbol table. We will ultimately change the relocation
- to be relative to the beginning of the section. */
- if (i.reloc[this_operand] == BFD_RELOC_386_GOTOFF
- || i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL
- || i.reloc[this_operand] == BFD_RELOC_X86_64_GOTOFF64)
- {
- if (exp->X_op != O_symbol)
+ /* Put out high byte first: can't use md_number_to_chars! */
+ *p++ = (i.tm.base_opcode >> 8) & 0xff;
+ *p = i.tm.base_opcode & 0xff;
+ }
+
+ /* Now the modrm byte and sib byte (if present). */
+ if (i.tm.opcode_modifier.modrm)
{
- as_bad (_("bad expression used with @%s"),
- (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL
- ? "GOTPCREL"
- : "GOTOFF"));
- return 0;
+ FRAG_APPEND_1_CHAR ((i.rm.regmem << 0
+ | i.rm.reg << 3
+ | i.rm.mode << 6));
+ /* If i.rm.regmem == ESP (4)
+ && i.rm.mode != (Register mode)
+ && not 16 bit
+ ==> need second modrm byte. */
+ if (i.rm.regmem == ESCAPE_TO_TWO_BYTE_ADDRESSING
+ && i.rm.mode != 3
+ && !(i.base_reg && i.base_reg->reg_type.bitfield.reg16))
+ FRAG_APPEND_1_CHAR ((i.sib.base << 0
+ | i.sib.index << 3
+ | i.sib.scale << 6));
}
- if (S_IS_LOCAL (exp->X_add_symbol)
- && S_GET_SEGMENT (exp->X_add_symbol) != undefined_section)
- section_symbol (S_GET_SEGMENT (exp->X_add_symbol));
- exp->X_op = O_subtract;
- exp->X_op_symbol = GOT_symbol;
- if (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL)
- i.reloc[this_operand] = BFD_RELOC_32_PCREL;
- else if (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTOFF64)
- i.reloc[this_operand] = BFD_RELOC_64;
- else
- i.reloc[this_operand] = BFD_RELOC_32;
- }
+ if (i.disp_operands)
+ output_disp (insn_start_frag, insn_start_off);
- if (exp->X_op == O_absent || exp->X_op == O_big)
- {
- /* Missing or bad expr becomes absolute 0. */
- as_bad (_("missing or invalid displacement expression `%s' taken as 0"),
- disp_start);
- exp->X_op = O_constant;
- exp->X_add_number = 0;
- exp->X_add_symbol = (symbolS *) 0;
- exp->X_op_symbol = (symbolS *) 0;
+ if (i.imm_operands)
+ output_imm (insn_start_frag, insn_start_off);
}
-#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
- if (exp->X_op != O_constant
- && OUTPUT_FLAVOR == bfd_target_aout_flavour
- && exp_seg != absolute_section
- && exp_seg != text_section
- && exp_seg != data_section
- && exp_seg != bss_section
- && exp_seg != undefined_section
- && !bfd_is_com_section (exp_seg))
+#ifdef DEBUG386
+ if (flag_debug)
{
- as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
- return 0;
+ pi ("" /*line*/, &i);
}
-#endif
-
- if (!(i.types[this_operand] & ~Disp))
- i.types[this_operand] &= types;
-
- return 1;
+#endif /* DEBUG386 */
}
-/* Make sure the memory operand we've been dealt is valid.
- Return 1 on success, 0 on a failure. */
+/* Return the size of the displacement operand N. */
static int
-i386_index_check (const char *operand_string)
+disp_size (unsigned int n)
{
- int ok;
-#if INFER_ADDR_PREFIX
- int fudged = 0;
-
- tryprefix:
-#endif
- ok = 1;
- if ((current_templates->start->cpu_flags & CpuSVME)
- && current_templates->end[-1].operand_types[0] == AnyMem)
- {
- /* Memory operands of SVME insns are special in that they only allow
- rAX as their memory address and ignore any segment override. */
- unsigned RegXX;
-
- /* SKINIT is even more restrictive: it always requires EAX. */
- if (strcmp (current_templates->start->name, "skinit") == 0)
- RegXX = Reg32;
- else if (flag_code == CODE_64BIT)
- RegXX = i.prefix[ADDR_PREFIX] == 0 ? Reg64 : Reg32;
- else
- RegXX = ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0)
- ? Reg16
- : Reg32);
- if (!i.base_reg
- || !(i.base_reg->reg_type & Acc)
- || !(i.base_reg->reg_type & RegXX)
- || i.index_reg
- || (i.types[0] & Disp))
- ok = 0;
- }
- else if (flag_code == CODE_64BIT)
- {
- unsigned RegXX = (i.prefix[ADDR_PREFIX] == 0 ? Reg64 : Reg32);
-
- if ((i.base_reg
- && ((i.base_reg->reg_type & RegXX) == 0)
- && (i.base_reg->reg_type != BaseIndex
- || i.index_reg))
- || (i.index_reg
- && ((i.index_reg->reg_type & (RegXX | BaseIndex))
- != (RegXX | BaseIndex))))
- ok = 0;
- }
- else
- {
- if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
- {
- /* 16bit checks. */
- if ((i.base_reg
- && ((i.base_reg->reg_type & (Reg16 | BaseIndex | RegRex))
- != (Reg16 | BaseIndex)))
- || (i.index_reg
- && (((i.index_reg->reg_type & (Reg16 | BaseIndex))
- != (Reg16 | BaseIndex))
- || !(i.base_reg
- && i.base_reg->reg_num < 6
- && i.index_reg->reg_num >= 6
- && i.log2_scale_factor == 0))))
- ok = 0;
- }
- else
- {
- /* 32bit checks. */
- if ((i.base_reg
- && (i.base_reg->reg_type & (Reg32 | RegRex)) != Reg32)
- || (i.index_reg
- && ((i.index_reg->reg_type & (Reg32 | BaseIndex | RegRex))
- != (Reg32 | BaseIndex))))
- ok = 0;
- }
- }
- if (!ok)
- {
-#if INFER_ADDR_PREFIX
- if (i.prefix[ADDR_PREFIX] == 0)
- {
- i.prefix[ADDR_PREFIX] = ADDR_PREFIX_OPCODE;
- i.prefixes += 1;
- /* Change the size of any displacement too. At most one of
- Disp16 or Disp32 is set.
- FIXME. There doesn't seem to be any real need for separate
- Disp16 and Disp32 flags. The same goes for Imm16 and Imm32.
- Removing them would probably clean up the code quite a lot. */
- if (flag_code != CODE_64BIT
- && (i.types[this_operand] & (Disp16 | Disp32)))
- i.types[this_operand] ^= (Disp16 | Disp32);
- fudged = 1;
- goto tryprefix;
- }
- if (fudged)
- as_bad (_("`%s' is not a valid base/index expression"),
- operand_string);
- else
-#endif
- as_bad (_("`%s' is not a valid %s bit base/index expression"),
- operand_string,
- flag_code_names[flag_code]);
- }
- return ok;
+ int size = 4;
+ if (i.types[n].bitfield.disp64)
+ size = 8;
+ else if (i.types[n].bitfield.disp8)
+ size = 1;
+ else if (i.types[n].bitfield.disp16)
+ size = 2;
+ return size;
}
-/* Parse OPERAND_STRING into the i386_insn structure I. Returns non-zero
- on error. */
+/* Return the size of the immediate operand N. */
static int
-i386_operand (char *operand_string)
+imm_size (unsigned int n)
{
- const reg_entry *r;
- char *end_op;
- char *op_string = operand_string;
-
- if (is_space_char (*op_string))
- ++op_string;
+ int size = 4;
+ if (i.types[n].bitfield.imm64)
+ size = 8;
+ else if (i.types[n].bitfield.imm8 || i.types[n].bitfield.imm8s)
+ size = 1;
+ else if (i.types[n].bitfield.imm16)
+ size = 2;
+ return size;
+}
- /* We check for an absolute prefix (differentiating,
- for example, 'jmp pc_relative_label' from 'jmp *absolute_label'. */
- if (*op_string == ABSOLUTE_PREFIX)
- {
- ++op_string;
- if (is_space_char (*op_string))
- ++op_string;
- i.types[this_operand] |= JumpAbsolute;
- }
+static void
+output_disp (fragS *insn_start_frag, offsetT insn_start_off)
+{
+ char *p;
+ unsigned int n;
- /* Check if operand is a register. */
- if ((r = parse_register (op_string, &end_op)) != NULL)
+ for (n = 0; n < i.operands; n++)
{
- /* Check for a segment override by searching for ':' after a
- segment register. */
- op_string = end_op;
- if (is_space_char (*op_string))
- ++op_string;
- if (*op_string == ':' && (r->reg_type & (SReg2 | SReg3)))
+ if (operand_type_check (i.types[n], disp))
{
- switch (r->reg_num)
+ if (i.op[n].disps->X_op == O_constant)
{
- case 0:
- i.seg[i.mem_operands] = &es;
- break;
- case 1:
- i.seg[i.mem_operands] = &cs;
- break;
- case 2:
- i.seg[i.mem_operands] = &ss;
- break;
- case 3:
- i.seg[i.mem_operands] = &ds;
- break;
- case 4:
- i.seg[i.mem_operands] = &fs;
- break;
- case 5:
- i.seg[i.mem_operands] = &gs;
- break;
- }
-
- /* Skip the ':' and whitespace. */
- ++op_string;
- if (is_space_char (*op_string))
- ++op_string;
-
- if (!is_digit_char (*op_string)
- && !is_identifier_char (*op_string)
- && *op_string != '('
- && *op_string != ABSOLUTE_PREFIX)
- {
- as_bad (_("bad memory operand `%s'"), op_string);
- return 0;
- }
- /* Handle case of %es:*foo. */
- if (*op_string == ABSOLUTE_PREFIX)
- {
- ++op_string;
- if (is_space_char (*op_string))
- ++op_string;
- i.types[this_operand] |= JumpAbsolute;
- }
- goto do_memory_reference;
- }
- if (*op_string)
- {
- as_bad (_("junk `%s' after register"), op_string);
- return 0;
- }
- i.types[this_operand] |= r->reg_type & ~BaseIndex;
- i.op[this_operand].regs = r;
- i.reg_operands++;
- }
- else if (*op_string == REGISTER_PREFIX)
- {
- as_bad (_("bad register name `%s'"), op_string);
- return 0;
- }
- else if (*op_string == IMMEDIATE_PREFIX)
- {
- ++op_string;
- if (i.types[this_operand] & JumpAbsolute)
- {
- as_bad (_("immediate operand illegal with absolute jump"));
- return 0;
- }
- if (!i386_immediate (op_string))
- return 0;
- }
- else if (is_digit_char (*op_string)
- || is_identifier_char (*op_string)
- || *op_string == '(')
- {
- /* This is a memory reference of some sort. */
- char *base_string;
-
- /* Start and end of displacement string expression (if found). */
- char *displacement_string_start;
- char *displacement_string_end;
-
- do_memory_reference:
- if ((i.mem_operands == 1
- && (current_templates->start->opcode_modifier & IsString) == 0)
- || i.mem_operands == 2)
- {
- as_bad (_("too many memory references for `%s'"),
- current_templates->start->name);
- return 0;
- }
-
- /* Check for base index form. We detect the base index form by
- looking for an ')' at the end of the operand, searching
- for the '(' matching it, and finding a REGISTER_PREFIX or ','
- after the '('. */
- base_string = op_string + strlen (op_string);
-
- --base_string;
- if (is_space_char (*base_string))
- --base_string;
-
- /* If we only have a displacement, set-up for it to be parsed later. */
- displacement_string_start = op_string;
- displacement_string_end = base_string + 1;
+ int size = disp_size (n);
+ offsetT val;
- if (*base_string == ')')
- {
- char *temp_string;
- unsigned int parens_balanced = 1;
- /* We've already checked that the number of left & right ()'s are
- equal, so this loop will not be infinite. */
- do
- {
- base_string--;
- if (*base_string == ')')
- parens_balanced++;
- if (*base_string == '(')
- parens_balanced--;
+ val = offset_in_range (i.op[n].disps->X_add_number,
+ size);
+ p = frag_more (size);
+ md_number_to_chars (p, val, size);
}
- while (parens_balanced);
-
- temp_string = base_string;
-
- /* Skip past '(' and whitespace. */
- ++base_string;
- if (is_space_char (*base_string))
- ++base_string;
-
- if (*base_string == ','
- || ((i.base_reg = parse_register (base_string, &end_op))
- != NULL))
+ else
{
- displacement_string_end = temp_string;
+ enum bfd_reloc_code_real reloc_type;
+ int size = disp_size (n);
+ int sign = i.types[n].bitfield.disp32s;
+ int pcrel = (i.flags[n] & Operand_PCrel) != 0;
- i.types[this_operand] |= BaseIndex;
+ /* We can't have 8 bit displacement here. */
+ gas_assert (!i.types[n].bitfield.disp8);
- if (i.base_reg)
+ /* The PC relative address is computed relative
+ to the instruction boundary, so in case immediate
+ fields follows, we need to adjust the value. */
+ if (pcrel && i.imm_operands)
{
- base_string = end_op;
- if (is_space_char (*base_string))
- ++base_string;
+ unsigned int n1;
+ int sz = 0;
+
+ for (n1 = 0; n1 < i.operands; n1++)
+ if (operand_type_check (i.types[n1], imm))
+ {
+ /* Only one immediate is allowed for PC
+ relative address. */
+ gas_assert (sz == 0);
+ sz = imm_size (n1);
+ i.op[n].disps->X_add_number -= sz;
+ }
+ /* We should find the immediate. */
+ gas_assert (sz != 0);
}
- /* There may be an index reg or scale factor here. */
- if (*base_string == ',')
+ p = frag_more (size);
+ reloc_type = reloc (size, pcrel, sign, i.reloc[n]);
+ if (GOT_symbol
+ && GOT_symbol == i.op[n].disps->X_add_symbol
+ && (((reloc_type == BFD_RELOC_32
+ || reloc_type == BFD_RELOC_X86_64_32S
+ || (reloc_type == BFD_RELOC_64
+ && object_64bit))
+ && (i.op[n].disps->X_op == O_symbol
+ || (i.op[n].disps->X_op == O_add
+ && ((symbol_get_value_expression
+ (i.op[n].disps->X_op_symbol)->X_op)
+ == O_subtract))))
+ || reloc_type == BFD_RELOC_32_PCREL))
{
- ++base_string;
- if (is_space_char (*base_string))
- ++base_string;
-
- if ((i.index_reg = parse_register (base_string, &end_op))
- != NULL)
- {
- base_string = end_op;
- if (is_space_char (*base_string))
- ++base_string;
- if (*base_string == ',')
- {
- ++base_string;
- if (is_space_char (*base_string))
- ++base_string;
- }
- else if (*base_string != ')')
- {
- as_bad (_("expecting `,' or `)' "
- "after index register in `%s'"),
- operand_string);
- return 0;
- }
- }
- else if (*base_string == REGISTER_PREFIX)
- {
- as_bad (_("bad register name `%s'"), base_string);
- return 0;
- }
+ offsetT add;
- /* Check for scale factor. */
- if (*base_string != ')')
+ if (insn_start_frag == frag_now)
+ add = (p - frag_now->fr_literal) - insn_start_off;
+ else
{
- char *end_scale = i386_scale (base_string);
-
- if (!end_scale)
- return 0;
+ fragS *fr;
- base_string = end_scale;
- if (is_space_char (*base_string))
- ++base_string;
- if (*base_string != ')')
- {
- as_bad (_("expecting `)' "
- "after scale factor in `%s'"),
- operand_string);
- return 0;
- }
+ add = insn_start_frag->fr_fix - insn_start_off;
+ for (fr = insn_start_frag->fr_next;
+ fr && fr != frag_now; fr = fr->fr_next)
+ add += fr->fr_fix;
+ add += p - frag_now->fr_literal;
}
- else if (!i.index_reg)
+
+ if (!object_64bit)
{
- as_bad (_("expecting index register or scale factor "
- "after `,'; got '%c'"),
- *base_string);
- return 0;
+ reloc_type = BFD_RELOC_386_GOTPC;
+ i.op[n].imms->X_add_number += add;
}
+ else if (reloc_type == BFD_RELOC_64)
+ reloc_type = BFD_RELOC_X86_64_GOTPC64;
+ else
+ /* Don't do the adjustment for x86-64, as there
+ the pcrel addressing is relative to the _next_
+ insn, and that is taken care of in other code. */
+ reloc_type = BFD_RELOC_X86_64_GOTPC32;
}
- else if (*base_string != ')')
- {
- as_bad (_("expecting `,' or `)' "
- "after base register in `%s'"),
- operand_string);
- return 0;
- }
- }
- else if (*base_string == REGISTER_PREFIX)
- {
- as_bad (_("bad register name `%s'"), base_string);
- return 0;
+ fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[n].disps, pcrel, reloc_type);
}
}
+ }
+}
- /* If there's an expression beginning the operand, parse it,
- assuming displacement_string_start and
- displacement_string_end are meaningful. */
- if (displacement_string_start != displacement_string_end)
- {
- if (!i386_displacement (displacement_string_start,
- displacement_string_end))
- return 0;
- }
+static void
+output_imm (fragS *insn_start_frag, offsetT insn_start_off)
+{
+ char *p;
+ unsigned int n;
- /* Special case for (%dx) while doing input/output op. */
- if (i.base_reg
- && i.base_reg->reg_type == (Reg16 | InOutPortReg)
- && i.index_reg == 0
- && i.log2_scale_factor == 0
- && i.seg[i.mem_operands] == 0
- && (i.types[this_operand] & Disp) == 0)
+ for (n = 0; n < i.operands; n++)
+ {
+ if (operand_type_check (i.types[n], imm))
{
- i.types[this_operand] = InOutPortReg;
- return 1;
- }
+ if (i.op[n].imms->X_op == O_constant)
+ {
+ int size = imm_size (n);
+ offsetT val;
- if (i386_index_check (operand_string) == 0)
- return 0;
- i.mem_operands++;
- }
- else
- {
- /* It's not a memory operand; argh! */
- as_bad (_("invalid char %s beginning operand %d `%s'"),
- output_invalid (*op_string),
- this_operand + 1,
- op_string);
- return 0;
- }
- return 1; /* Normal return. */
-}
-\f
-/* md_estimate_size_before_relax()
+ val = offset_in_range (i.op[n].imms->X_add_number,
+ size);
+ p = frag_more (size);
+ md_number_to_chars (p, val, size);
+ }
+ else
+ {
+ /* Not absolute_section.
+ Need a 32-bit fixup (don't support 8bit
+ non-absolute imms). Try to support other
+ sizes ... */
+ enum bfd_reloc_code_real reloc_type;
+ int size = imm_size (n);
+ int sign;
- Called just before relax() for rs_machine_dependent frags. The x86
- assembler uses these frags to handle variable size jump
- instructions.
+ if (i.types[n].bitfield.imm32s
+ && (i.suffix == QWORD_MNEM_SUFFIX
+ || (!i.suffix && i.tm.opcode_modifier.no_lsuf)))
+ sign = 1;
+ else
+ sign = 0;
- Any symbol that is now undefined will not become defined.
- Return the correct fr_subtype in the frag.
- Return the initial "guess for variable size of frag" to caller.
- The guess is actually the growth beyond the fixed part. Whatever
- we do to grow the fixed or variable part contributes to our
- returned value. */
+ p = frag_more (size);
+ reloc_type = reloc (size, 0, sign, i.reloc[n]);
-int
-md_estimate_size_before_relax (fragP, segment)
- fragS *fragP;
- segT segment;
-{
- /* We've already got fragP->fr_subtype right; all we have to do is
- check for un-relaxable symbols. On an ELF system, we can't relax
- an externally visible symbol, because it may be overridden by a
- shared library. */
- if (S_GET_SEGMENT (fragP->fr_symbol) != segment
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- || (IS_ELF
- && (S_IS_EXTERNAL (fragP->fr_symbol)
- || S_IS_WEAK (fragP->fr_symbol)))
-#endif
- )
- {
- /* Symbol is undefined in this segment, or we need to keep a
- reloc so that weak symbols can be overridden. */
- int size = (fragP->fr_subtype & CODE16) ? 2 : 4;
- enum bfd_reloc_code_real reloc_type;
- unsigned char *opcode;
- int old_fr_fix;
+ /* This is tough to explain. We end up with this one if we
+ * have operands that look like
+ * "_GLOBAL_OFFSET_TABLE_+[.-.L284]". The goal here is to
+ * obtain the absolute address of the GOT, and it is strongly
+ * preferable from a performance point of view to avoid using
+ * a runtime relocation for this. The actual sequence of
+ * instructions often look something like:
+ *
+ * call .L66
+ * .L66:
+ * popl %ebx
+ * addl $_GLOBAL_OFFSET_TABLE_+[.-.L66],%ebx
+ *
+ * The call and pop essentially return the absolute address
+ * of the label .L66 and store it in %ebx. The linker itself
+ * will ultimately change the first operand of the addl so
+ * that %ebx points to the GOT, but to keep things simple, the
+ * .o file must have this operand set so that it generates not
+ * the absolute address of .L66, but the absolute address of
+ * itself. This allows the linker itself simply treat a GOTPC
+ * relocation as asking for a pcrel offset to the GOT to be
+ * added in, and the addend of the relocation is stored in the
+ * operand field for the instruction itself.
+ *
+ * Our job here is to fix the operand so that it would add
+ * the correct offset so that %ebx would point to itself. The
+ * thing that is tricky is that .-.L66 will point to the
+ * beginning of the instruction, so we need to further modify
+ * the operand so that it will point to itself. There are
+ * other cases where you have something like:
+ *
+ * .long $_GLOBAL_OFFSET_TABLE_+[.-.L66]
+ *
+ * and here no correction would be required. Internally in
+ * the assembler we treat operands of this form as not being
+ * pcrel since the '.' is explicitly mentioned, and I wonder
+ * whether it would simplify matters to do it this way. Who
+ * knows. In earlier versions of the PIC patches, the
+ * pcrel_adjust field was used to store the correction, but
+ * since the expression is not pcrel, I felt it would be
+ * confusing to do it this way. */
- if (fragP->fr_var != NO_RELOC)
- reloc_type = fragP->fr_var;
- else if (size == 2)
- reloc_type = BFD_RELOC_16_PCREL;
- else
- reloc_type = BFD_RELOC_32_PCREL;
+ if ((reloc_type == BFD_RELOC_32
+ || reloc_type == BFD_RELOC_X86_64_32S
+ || reloc_type == BFD_RELOC_64)
+ && GOT_symbol
+ && GOT_symbol == i.op[n].imms->X_add_symbol
+ && (i.op[n].imms->X_op == O_symbol
+ || (i.op[n].imms->X_op == O_add
+ && ((symbol_get_value_expression
+ (i.op[n].imms->X_op_symbol)->X_op)
+ == O_subtract))))
+ {
+ offsetT add;
- old_fr_fix = fragP->fr_fix;
- opcode = (unsigned char *) fragP->fr_opcode;
+ if (insn_start_frag == frag_now)
+ add = (p - frag_now->fr_literal) - insn_start_off;
+ else
+ {
+ fragS *fr;
- switch (TYPE_FROM_RELAX_STATE (fragP->fr_subtype))
- {
- case UNCOND_JUMP:
- /* Make jmp (0xeb) a (d)word displacement jump. */
- opcode[0] = 0xe9;
- fragP->fr_fix += size;
- fix_new (fragP, old_fr_fix, size,
- fragP->fr_symbol,
- fragP->fr_offset, 1,
- reloc_type);
- break;
+ add = insn_start_frag->fr_fix - insn_start_off;
+ for (fr = insn_start_frag->fr_next;
+ fr && fr != frag_now; fr = fr->fr_next)
+ add += fr->fr_fix;
+ add += p - frag_now->fr_literal;
+ }
- case COND_JUMP86:
- if (size == 2
- && (!no_cond_jump_promotion || fragP->fr_var != NO_RELOC))
- {
- /* Negate the condition, and branch past an
- unconditional jump. */
- opcode[0] ^= 1;
- opcode[1] = 3;
- /* Insert an unconditional jump. */
- opcode[2] = 0xe9;
- /* We added two extra opcode bytes, and have a two byte
- offset. */
- fragP->fr_fix += 2 + 2;
- fix_new (fragP, old_fr_fix + 2, 2,
- fragP->fr_symbol,
- fragP->fr_offset, 1,
- reloc_type);
- break;
+ if (!object_64bit)
+ reloc_type = BFD_RELOC_386_GOTPC;
+ else if (size == 4)
+ reloc_type = BFD_RELOC_X86_64_GOTPC32;
+ else if (size == 8)
+ reloc_type = BFD_RELOC_X86_64_GOTPC64;
+ i.op[n].imms->X_add_number += add;
+ }
+ fix_new_exp (frag_now, p - frag_now->fr_literal, size,
+ i.op[n].imms, 0, reloc_type);
}
- /* Fall through. */
-
- case COND_JUMP:
- if (no_cond_jump_promotion && fragP->fr_var == NO_RELOC)
- {
- fixS *fixP;
+ }
+ }
+}
+\f
+/* x86_cons_fix_new is called via the expression parsing code when a
+ reloc is needed. We use this hook to get the correct .got reloc. */
+static enum bfd_reloc_code_real got_reloc = NO_RELOC;
+static int cons_sign = -1;
- fragP->fr_fix += 1;
- fixP = fix_new (fragP, old_fr_fix, 1,
- fragP->fr_symbol,
- fragP->fr_offset, 1,
- BFD_RELOC_8_PCREL);
- fixP->fx_signed = 1;
- break;
- }
+void
+x86_cons_fix_new (fragS *frag, unsigned int off, unsigned int len,
+ expressionS *exp)
+{
+ enum bfd_reloc_code_real r = reloc (len, 0, cons_sign, got_reloc);
- /* This changes the byte-displacement jump 0x7N
- to the (d)word-displacement jump 0x0f,0x8N. */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- /* We've added an opcode byte. */
- fragP->fr_fix += 1 + size;
- fix_new (fragP, old_fr_fix + 1, size,
- fragP->fr_symbol,
- fragP->fr_offset, 1,
- reloc_type);
- break;
+ got_reloc = NO_RELOC;
- default:
- BAD_CASE (fragP->fr_subtype);
- break;
- }
- frag_wane (fragP);
- return fragP->fr_fix - old_fr_fix;
+#ifdef TE_PE
+ if (exp->X_op == O_secrel)
+ {
+ exp->X_op = O_symbol;
+ r = BFD_RELOC_32_SECREL;
}
+#endif
- /* Guess size depending on current relax state. Initially the relax
- state will correspond to a short jump and we return 1, because
- the variable part of the frag (the branch offset) is one byte
- long. However, we can relax a section more than once and in that
- case we must either set fr_subtype back to the unrelaxed state,
- or return the value for the appropriate branch. */
- return md_relax_table[fragP->fr_subtype].rlx_length;
+ fix_new_exp (frag, off, len, exp, 0, r);
}
-/* Called after relax() is finished.
-
- In: Address of frag.
- fr_type == rs_machine_dependent.
- fr_subtype is what the address relaxed to.
-
- Out: Any fixSs and constants are set up.
- Caller will turn frag into a ".space 0". */
+#if (!defined (OBJ_ELF) && !defined (OBJ_MAYBE_ELF)) || defined (LEX_AT)
+# define lex_got(reloc, adjust, types) NULL
+#else
+/* Parse operands of the form
+ <symbol>@GOTOFF+<nnn>
+ and similar .plt or .got references.
-void
-md_convert_frag (abfd, sec, fragP)
- bfd *abfd ATTRIBUTE_UNUSED;
- segT sec ATTRIBUTE_UNUSED;
- fragS *fragP;
+ If we find one, set up the correct relocation in RELOC and copy the
+ input string, minus the `@GOTOFF' into a malloc'd buffer for
+ parsing by the calling routine. Return this buffer, and if ADJUST
+ is non-null set it to the length of the string we removed from the
+ input line. Otherwise return NULL. */
+static char *
+lex_got (enum bfd_reloc_code_real *reloc,
+ int *adjust,
+ i386_operand_type *types)
{
- unsigned char *opcode;
- unsigned char *where_to_put_displacement = NULL;
- offsetT target_address;
- offsetT opcode_address;
- unsigned int extension = 0;
- offsetT displacement_from_opcode_start;
-
- opcode = (unsigned char *) fragP->fr_opcode;
+ /* Some of the relocations depend on the size of what field is to
+ be relocated. But in our callers i386_immediate and i386_displacement
+ we don't yet know the operand size (this will be set by insn
+ matching). Hence we record the word32 relocation here,
+ and adjust the reloc according to the real size in reloc(). */
+ static const struct {
+ const char *str;
+ const enum bfd_reloc_code_real rel[2];
+ const i386_operand_type types64;
+ } gotrel[] = {
+ { "PLTOFF", { _dummy_first_bfd_reloc_code_real,
+ BFD_RELOC_X86_64_PLTOFF64 },
+ OPERAND_TYPE_IMM64 },
+ { "PLT", { BFD_RELOC_386_PLT32,
+ BFD_RELOC_X86_64_PLT32 },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "GOTPLT", { _dummy_first_bfd_reloc_code_real,
+ BFD_RELOC_X86_64_GOTPLT64 },
+ OPERAND_TYPE_IMM64_DISP64 },
+ { "GOTOFF", { BFD_RELOC_386_GOTOFF,
+ BFD_RELOC_X86_64_GOTOFF64 },
+ OPERAND_TYPE_IMM64_DISP64 },
+ { "GOTPCREL", { _dummy_first_bfd_reloc_code_real,
+ BFD_RELOC_X86_64_GOTPCREL },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TLSGD", { BFD_RELOC_386_TLS_GD,
+ BFD_RELOC_X86_64_TLSGD },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TLSLDM", { BFD_RELOC_386_TLS_LDM,
+ _dummy_first_bfd_reloc_code_real },
+ OPERAND_TYPE_NONE },
+ { "TLSLD", { _dummy_first_bfd_reloc_code_real,
+ BFD_RELOC_X86_64_TLSLD },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "GOTTPOFF", { BFD_RELOC_386_TLS_IE_32,
+ BFD_RELOC_X86_64_GOTTPOFF },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TPOFF", { BFD_RELOC_386_TLS_LE_32,
+ BFD_RELOC_X86_64_TPOFF32 },
+ OPERAND_TYPE_IMM32_32S_64_DISP32_64 },
+ { "NTPOFF", { BFD_RELOC_386_TLS_LE,
+ _dummy_first_bfd_reloc_code_real },
+ OPERAND_TYPE_NONE },
+ { "DTPOFF", { BFD_RELOC_386_TLS_LDO_32,
+ BFD_RELOC_X86_64_DTPOFF32 },
- /* Address we want to reach in file space. */
- target_address = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset;
+ OPERAND_TYPE_IMM32_32S_64_DISP32_64 },
+ { "GOTNTPOFF",{ BFD_RELOC_386_TLS_GOTIE,
+ _dummy_first_bfd_reloc_code_real },
+ OPERAND_TYPE_NONE },
+ { "INDNTPOFF",{ BFD_RELOC_386_TLS_IE,
+ _dummy_first_bfd_reloc_code_real },
+ OPERAND_TYPE_NONE },
+ { "GOT", { BFD_RELOC_386_GOT32,
+ BFD_RELOC_X86_64_GOT32 },
+ OPERAND_TYPE_IMM32_32S_64_DISP32 },
+ { "TLSDESC", { BFD_RELOC_386_TLS_GOTDESC,
+ BFD_RELOC_X86_64_GOTPC32_TLSDESC },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ { "TLSCALL", { BFD_RELOC_386_TLS_DESC_CALL,
+ BFD_RELOC_X86_64_TLSDESC_CALL },
+ OPERAND_TYPE_IMM32_32S_DISP32 },
+ };
+ char *cp;
+ unsigned int j;
- /* Address opcode resides at in file space. */
- opcode_address = fragP->fr_address + fragP->fr_fix;
+ if (!IS_ELF)
+ return NULL;
- /* Displacement from opcode start to fill into instruction. */
- displacement_from_opcode_start = target_address - opcode_address;
+ for (cp = input_line_pointer; *cp != '@'; cp++)
+ if (is_end_of_line[(unsigned char) *cp] || *cp == ',')
+ return NULL;
- if ((fragP->fr_subtype & BIG) == 0)
- {
- /* Don't have to change opcode. */
- extension = 1; /* 1 opcode + 1 displacement */
- where_to_put_displacement = &opcode[1];
- }
- else
+ for (j = 0; j < ARRAY_SIZE (gotrel); j++)
{
- if (no_cond_jump_promotion
- && TYPE_FROM_RELAX_STATE (fragP->fr_subtype) != UNCOND_JUMP)
- as_warn_where (fragP->fr_file, fragP->fr_line,
- _("long jump required"));
+ int len;
- switch (fragP->fr_subtype)
+ len = strlen (gotrel[j].str);
+ if (strncasecmp (cp + 1, gotrel[j].str, len) == 0)
{
- case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG):
- extension = 4; /* 1 opcode + 4 displacement */
- opcode[0] = 0xe9;
- where_to_put_displacement = &opcode[1];
- break;
+ if (gotrel[j].rel[object_64bit] != 0)
+ {
+ int first, second;
+ char *tmpbuf, *past_reloc;
- case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16):
- extension = 2; /* 1 opcode + 2 displacement */
- opcode[0] = 0xe9;
- where_to_put_displacement = &opcode[1];
- break;
+ *reloc = gotrel[j].rel[object_64bit];
+ if (adjust)
+ *adjust = len;
- case ENCODE_RELAX_STATE (COND_JUMP, BIG):
- case ENCODE_RELAX_STATE (COND_JUMP86, BIG):
- extension = 5; /* 2 opcode + 4 displacement */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- where_to_put_displacement = &opcode[2];
- break;
+ if (types)
+ {
+ if (flag_code != CODE_64BIT)
+ {
+ types->bitfield.imm32 = 1;
+ types->bitfield.disp32 = 1;
+ }
+ else
+ *types = gotrel[j].types64;
+ }
- case ENCODE_RELAX_STATE (COND_JUMP, BIG16):
- extension = 3; /* 2 opcode + 2 displacement */
- opcode[1] = opcode[0] + 0x10;
- opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
- where_to_put_displacement = &opcode[2];
- break;
+ if (GOT_symbol == NULL)
+ GOT_symbol = symbol_find_or_make (GLOBAL_OFFSET_TABLE_NAME);
- case ENCODE_RELAX_STATE (COND_JUMP86, BIG16):
- extension = 4;
- opcode[0] ^= 1;
- opcode[1] = 3;
- opcode[2] = 0xe9;
- where_to_put_displacement = &opcode[3];
- break;
+ /* The length of the first part of our input line. */
+ first = cp - input_line_pointer;
- default:
- BAD_CASE (fragP->fr_subtype);
- break;
- }
- }
+ /* The second part goes from after the reloc token until
+ (and including) an end_of_line char or comma. */
+ past_reloc = cp + 1 + len;
+ cp = past_reloc;
+ while (!is_end_of_line[(unsigned char) *cp] && *cp != ',')
+ ++cp;
+ second = cp + 1 - past_reloc;
- /* If size if less then four we are sure that the operand fits,
- but if it's 4, then it could be that the displacement is larger
- then -/+ 2GB. */
- if (DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype) == 4
- && object_64bit
- && ((addressT) (displacement_from_opcode_start - extension
- + ((addressT) 1 << 31))
- > (((addressT) 2 << 31) - 1)))
- {
- as_bad_where (fragP->fr_file, fragP->fr_line,
- _("jump target out of range"));
- /* Make us emit 0. */
- displacement_from_opcode_start = extension;
- }
- /* Now put displacement after opcode. */
- md_number_to_chars ((char *) where_to_put_displacement,
- (valueT) (displacement_from_opcode_start - extension),
- DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype));
- fragP->fr_fix += extension;
-}
-\f
-/* Size of byte displacement jmp. */
-int md_short_jump_size = 2;
+ /* Allocate and copy string. The trailing NUL shouldn't
+ be necessary, but be safe. */
+ tmpbuf = (char *) xmalloc (first + second + 2);
+ memcpy (tmpbuf, input_line_pointer, first);
+ if (second != 0 && *past_reloc != ' ')
+ /* Replace the relocation token with ' ', so that
+ errors like foo@GOTOFF1 will be detected. */
+ tmpbuf[first++] = ' ';
+ memcpy (tmpbuf + first, past_reloc, second);
+ tmpbuf[first + second] = '\0';
+ return tmpbuf;
+ }
-/* Size of dword displacement jmp. */
-int md_long_jump_size = 5;
+ as_bad (_("@%s reloc is not supported with %d-bit output format"),
+ gotrel[j].str, 1 << (5 + object_64bit));
+ return NULL;
+ }
+ }
-void
-md_create_short_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
-{
- offsetT offset;
-
- offset = to_addr - (from_addr + 2);
- /* Opcode for byte-disp jump. */
- md_number_to_chars (ptr, (valueT) 0xeb, 1);
- md_number_to_chars (ptr + 1, (valueT) offset, 1);
+ /* Might be a symbol version string. Don't as_bad here. */
+ return NULL;
}
void
-md_create_long_jump (ptr, from_addr, to_addr, frag, to_symbol)
- char *ptr;
- addressT from_addr, to_addr;
- fragS *frag ATTRIBUTE_UNUSED;
- symbolS *to_symbol ATTRIBUTE_UNUSED;
+x86_cons (expressionS *exp, int size)
{
- offsetT offset;
+ intel_syntax = -intel_syntax;
- offset = to_addr - (from_addr + 5);
- md_number_to_chars (ptr, (valueT) 0xe9, 1);
- md_number_to_chars (ptr + 1, (valueT) offset, 4);
-}
-\f
-/* Apply a fixup (fixS) to segment data, once it has been determined
- by our caller that we have all the info we need to fix it up.
+ if (size == 4 || (object_64bit && size == 8))
+ {
+ /* Handle @GOTOFF and the like in an expression. */
+ char *save;
+ char *gotfree_input_line;
+ int adjust;
- On the 386, immediates, displacements, and data pointers are all in
- the same (little-endian) format, so we don't need to care about which
- we are handling. */
+ save = input_line_pointer;
+ gotfree_input_line = lex_got (&got_reloc, &adjust, NULL);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
-void
-md_apply_fix (fixP, valP, seg)
- /* The fix we're to put in. */
- fixS *fixP;
- /* Pointer to the value of the bits. */
- valueT *valP;
- /* Segment fix is from. */
- segT seg ATTRIBUTE_UNUSED;
-{
- char *p = fixP->fx_where + fixP->fx_frag->fr_literal;
- valueT value = *valP;
+ expression (exp);
-#if !defined (TE_Mach)
- if (fixP->fx_pcrel)
- {
- switch (fixP->fx_r_type)
+ if (gotfree_input_line)
{
- default:
- break;
+ /* expression () has merrily parsed up to the end of line,
+ or a comma - in the wrong buffer. Transfer how far
+ input_line_pointer has moved to the right buffer. */
+ input_line_pointer = (save
+ + (input_line_pointer - gotfree_input_line)
+ + adjust);
+ free (gotfree_input_line);
+ if (exp->X_op == O_constant
+ || exp->X_op == O_absent
+ || exp->X_op == O_illegal
+ || exp->X_op == O_register
+ || exp->X_op == O_big)
+ {
+ char c = *input_line_pointer;
+ *input_line_pointer = 0;
+ as_bad (_("missing or invalid expression `%s'"), save);
+ *input_line_pointer = c;
+ }
+ }
+ }
+ else
+ expression (exp);
- case BFD_RELOC_64:
- fixP->fx_r_type = BFD_RELOC_64_PCREL;
- break;
- case BFD_RELOC_32:
- case BFD_RELOC_X86_64_32S:
- fixP->fx_r_type = BFD_RELOC_32_PCREL;
- break;
- case BFD_RELOC_16:
- fixP->fx_r_type = BFD_RELOC_16_PCREL;
- break;
- case BFD_RELOC_8:
- fixP->fx_r_type = BFD_RELOC_8_PCREL;
- break;
- }
- }
+ intel_syntax = -intel_syntax;
- if (fixP->fx_addsy != NULL
- && (fixP->fx_r_type == BFD_RELOC_32_PCREL
- || fixP->fx_r_type == BFD_RELOC_64_PCREL
- || fixP->fx_r_type == BFD_RELOC_16_PCREL
- || fixP->fx_r_type == BFD_RELOC_8_PCREL)
- && !use_rela_relocations)
- {
- /* This is a hack. There should be a better way to handle this.
- This covers for the fact that bfd_install_relocation will
- subtract the current location (for partial_inplace, PC relative
- relocations); see more below. */
-#ifndef OBJ_AOUT
- if (IS_ELF
-#ifdef TE_PE
- || OUTPUT_FLAVOR == bfd_target_coff_flavour
-#endif
- )
- value += fixP->fx_where + fixP->fx_frag->fr_address;
+ if (intel_syntax)
+ i386_intel_simplify (exp);
+}
#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- if (IS_ELF)
- {
- segT sym_seg = S_GET_SEGMENT (fixP->fx_addsy);
- if ((sym_seg == seg
- || (symbol_section_p (fixP->fx_addsy)
- && sym_seg != absolute_section))
- && !generic_force_reloc (fixP))
- {
- /* Yes, we add the values in twice. This is because
- bfd_install_relocation subtracts them out again. I think
- bfd_install_relocation is broken, but I don't dare change
- it. FIXME. */
- value += fixP->fx_where + fixP->fx_frag->fr_address;
- }
- }
-#endif
-#if defined (OBJ_COFF) && defined (TE_PE)
- /* For some reason, the PE format does not store a
- section address offset for a PC relative symbol. */
- if (S_GET_SEGMENT (fixP->fx_addsy) != seg
- || S_IS_WEAK (fixP->fx_addsy))
- value += md_pcrel_from (fixP);
-#endif
- }
+static void signed_cons (int size)
+{
+ if (flag_code == CODE_64BIT)
+ cons_sign = 1;
+ cons (size);
+ cons_sign = -1;
+}
- /* Fix a few things - the dynamic linker expects certain values here,
- and we must not disappoint it. */
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- if (IS_ELF && fixP->fx_addsy)
- switch (fixP->fx_r_type)
- {
- case BFD_RELOC_386_PLT32:
- case BFD_RELOC_X86_64_PLT32:
- /* Make the jump instruction point to the address of the operand. At
- runtime we merely add the offset to the actual PLT entry. */
- value = -4;
- break;
+#ifdef TE_PE
+static void
+pe_directive_secrel (dummy)
+ int dummy ATTRIBUTE_UNUSED;
+{
+ expressionS exp;
- case BFD_RELOC_386_TLS_GD:
- case BFD_RELOC_386_TLS_LDM:
- case BFD_RELOC_386_TLS_IE_32:
- case BFD_RELOC_386_TLS_IE:
- case BFD_RELOC_386_TLS_GOTIE:
- case BFD_RELOC_386_TLS_GOTDESC:
- case BFD_RELOC_X86_64_TLSGD:
- case BFD_RELOC_X86_64_TLSLD:
- case BFD_RELOC_X86_64_GOTTPOFF:
- case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
- value = 0; /* Fully resolved at runtime. No addend. */
- /* Fallthrough */
- case BFD_RELOC_386_TLS_LE:
- case BFD_RELOC_386_TLS_LDO_32:
- case BFD_RELOC_386_TLS_LE_32:
- case BFD_RELOC_X86_64_DTPOFF32:
- case BFD_RELOC_X86_64_DTPOFF64:
- case BFD_RELOC_X86_64_TPOFF32:
- case BFD_RELOC_X86_64_TPOFF64:
- S_SET_THREAD_LOCAL (fixP->fx_addsy);
- break;
+ do
+ {
+ expression (&exp);
+ if (exp.X_op == O_symbol)
+ exp.X_op = O_secrel;
- case BFD_RELOC_386_TLS_DESC_CALL:
- case BFD_RELOC_X86_64_TLSDESC_CALL:
- value = 0; /* Fully resolved at runtime. No addend. */
- S_SET_THREAD_LOCAL (fixP->fx_addsy);
- fixP->fx_done = 0;
- return;
+ emit_expr (&exp, 4);
+ }
+ while (*input_line_pointer++ == ',');
- case BFD_RELOC_386_GOT32:
- case BFD_RELOC_X86_64_GOT32:
- value = 0; /* Fully resolved at runtime. No addend. */
- break;
+ input_line_pointer--;
+ demand_empty_rest_of_line ();
+}
+#endif
- case BFD_RELOC_VTABLE_INHERIT:
- case BFD_RELOC_VTABLE_ENTRY:
- fixP->fx_done = 0;
- return;
+static int
+i386_immediate (char *imm_start)
+{
+ char *save_input_line_pointer;
+ char *gotfree_input_line;
+ segT exp_seg = 0;
+ expressionS *exp;
+ i386_operand_type types;
- default:
- break;
- }
-#endif /* defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) */
- *valP = value;
-#endif /* !defined (TE_Mach) */
+ operand_type_set (&types, ~0);
- /* Are we finished with this relocation now? */
- if (fixP->fx_addsy == NULL)
- fixP->fx_done = 1;
- else if (use_rela_relocations)
+ if (i.imm_operands == MAX_IMMEDIATE_OPERANDS)
{
- fixP->fx_no_overflow = 1;
- /* Remember value for tc_gen_reloc. */
- fixP->fx_addnumber = value;
- value = 0;
+ as_bad (_("at most %d immediate operands are allowed"),
+ MAX_IMMEDIATE_OPERANDS);
+ return 0;
}
- md_number_to_chars (p, value, fixP->fx_size);
-}
-\f
-#define MAX_LITTLENUMS 6
-
-/* Turn the string pointed to by litP into a floating point constant
- of type TYPE, and emit the appropriate bytes. The number of
- LITTLENUMS emitted is stored in *SIZEP. An error message is
- returned, or NULL on OK. */
+ exp = &im_expressions[i.imm_operands++];
+ i.op[this_operand].imms = exp;
-char *
-md_atof (type, litP, sizeP)
- int type;
- char *litP;
- int *sizeP;
-{
- int prec;
- LITTLENUM_TYPE words[MAX_LITTLENUMS];
- LITTLENUM_TYPE *wordP;
- char *t;
+ if (is_space_char (*imm_start))
+ ++imm_start;
- switch (type)
- {
- case 'f':
- case 'F':
- prec = 2;
- break;
+ save_input_line_pointer = input_line_pointer;
+ input_line_pointer = imm_start;
- case 'd':
- case 'D':
- prec = 4;
- break;
+ gotfree_input_line = lex_got (&i.reloc[this_operand], NULL, &types);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
- case 'x':
- case 'X':
- prec = 5;
- break;
+ exp_seg = expression (exp);
- default:
- *sizeP = 0;
- return _("Bad call to md_atof ()");
- }
- t = atof_ieee (input_line_pointer, type, words);
- if (t)
- input_line_pointer = t;
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer)
+ as_bad (_("junk `%s' after expression"), input_line_pointer);
- *sizeP = prec * sizeof (LITTLENUM_TYPE);
- /* This loops outputs the LITTLENUMs in REVERSE order; in accord with
- the bigendian 386. */
- for (wordP = words + prec - 1; prec--;)
+ input_line_pointer = save_input_line_pointer;
+ if (gotfree_input_line)
{
- md_number_to_chars (litP, (valueT) (*wordP--), sizeof (LITTLENUM_TYPE));
- litP += sizeof (LITTLENUM_TYPE);
+ free (gotfree_input_line);
+
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
}
- return 0;
+
+ return i386_finalize_immediate (exp_seg, exp, types, imm_start);
}
-\f
-static char output_invalid_buf[sizeof (unsigned char) * 2 + 6];
-static char *
-output_invalid (int c)
+static int
+i386_finalize_immediate (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *imm_start)
{
- if (ISPRINT (c))
- snprintf (output_invalid_buf, sizeof (output_invalid_buf),
- "'%c'", c);
+ if (exp->X_op == O_absent || exp->X_op == O_illegal || exp->X_op == O_big)
+ {
+ as_bad (_("missing or invalid immediate expression `%s'"),
+ imm_start);
+ return 0;
+ }
+ else if (exp->X_op == O_constant)
+ {
+ /* Size it properly later. */
+ i.types[this_operand].bitfield.imm64 = 1;
+ /* If BFD64, sign extend val. */
+ if (!use_rela_relocations
+ && (exp->X_add_number & ~(((addressT) 2 << 31) - 1)) == 0)
+ exp->X_add_number
+ = (exp->X_add_number ^ ((addressT) 1 << 31)) - ((addressT) 1 << 31);
+ }
+#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
+ else if (OUTPUT_FLAVOR == bfd_target_aout_flavour
+ && exp_seg != absolute_section
+ && exp_seg != text_section
+ && exp_seg != data_section
+ && exp_seg != bss_section
+ && exp_seg != undefined_section
+ && !bfd_is_com_section (exp_seg))
+ {
+ as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
+ return 0;
+ }
+#endif
+ else if (!intel_syntax && exp->X_op == O_register)
+ {
+ as_bad (_("illegal immediate register operand %s"), imm_start);
+ return 0;
+ }
else
- snprintf (output_invalid_buf, sizeof (output_invalid_buf),
- "(0x%x)", (unsigned char) c);
- return output_invalid_buf;
-}
+ {
+ /* This is an address. The size of the address will be
+ determined later, depending on destination register,
+ suffix, or the default for the section. */
+ i.types[this_operand].bitfield.imm8 = 1;
+ i.types[this_operand].bitfield.imm16 = 1;
+ i.types[this_operand].bitfield.imm32 = 1;
+ i.types[this_operand].bitfield.imm32s = 1;
+ i.types[this_operand].bitfield.imm64 = 1;
+ i.types[this_operand] = operand_type_and (i.types[this_operand],
+ types);
+ }
-/* REG_STRING starts *before* REGISTER_PREFIX. */
+ return 1;
+}
-static const reg_entry *
-parse_real_register (char *reg_string, char **end_op)
+static char *
+i386_scale (char *scale)
{
- char *s = reg_string;
- char *p;
- char reg_name_given[MAX_REG_NAME_SIZE + 1];
- const reg_entry *r;
-
- /* Skip possible REGISTER_PREFIX and possible whitespace. */
- if (*s == REGISTER_PREFIX)
- ++s;
+ offsetT val;
+ char *save = input_line_pointer;
- if (is_space_char (*s))
- ++s;
+ input_line_pointer = scale;
+ val = get_absolute_expression ();
- p = reg_name_given;
- while ((*p++ = register_chars[(unsigned char) *s]) != '\0')
+ switch (val)
{
- if (p >= reg_name_given + MAX_REG_NAME_SIZE)
- return (const reg_entry *) NULL;
- s++;
- }
+ case 1:
+ i.log2_scale_factor = 0;
+ break;
+ case 2:
+ i.log2_scale_factor = 1;
+ break;
+ case 4:
+ i.log2_scale_factor = 2;
+ break;
+ case 8:
+ i.log2_scale_factor = 3;
+ break;
+ default:
+ {
+ char sep = *input_line_pointer;
- /* For naked regs, make sure that we are not dealing with an identifier.
- This prevents confusing an identifier like `eax_var' with register
- `eax'. */
- if (allow_naked_reg && identifier_chars[(unsigned char) *s])
- return (const reg_entry *) NULL;
+ *input_line_pointer = '\0';
+ as_bad (_("expecting scale factor of 1, 2, 4, or 8: got `%s'"),
+ scale);
+ *input_line_pointer = sep;
+ input_line_pointer = save;
+ return NULL;
+ }
+ }
+ if (i.log2_scale_factor != 0 && i.index_reg == 0)
+ {
+ as_warn (_("scale factor of %d without an index register"),
+ 1 << i.log2_scale_factor);
+ i.log2_scale_factor = 0;
+ }
+ scale = input_line_pointer;
+ input_line_pointer = save;
+ return scale;
+}
- *end_op = s;
+static int
+i386_displacement (char *disp_start, char *disp_end)
+{
+ expressionS *exp;
+ segT exp_seg = 0;
+ char *save_input_line_pointer;
+ char *gotfree_input_line;
+ int override;
+ i386_operand_type bigdisp, types = anydisp;
+ int ret;
- r = (const reg_entry *) hash_find (reg_hash, reg_name_given);
+ if (i.disp_operands == MAX_MEMORY_OPERANDS)
+ {
+ as_bad (_("at most %d displacement operands are allowed"),
+ MAX_MEMORY_OPERANDS);
+ return 0;
+ }
- /* Handle floating point regs, allowing spaces in the (i) part. */
- if (r == i386_regtab /* %st is first entry of table */)
+ operand_type_set (&bigdisp, 0);
+ if ((i.types[this_operand].bitfield.jumpabsolute)
+ || (!current_templates->start->opcode_modifier.jump
+ && !current_templates->start->opcode_modifier.jumpdword))
{
- if (is_space_char (*s))
- ++s;
- if (*s == '(')
+ bigdisp.bitfield.disp32 = 1;
+ override = (i.prefix[ADDR_PREFIX] != 0);
+ if (flag_code == CODE_64BIT)
{
- ++s;
- if (is_space_char (*s))
- ++s;
- if (*s >= '0' && *s <= '7')
+ if (!override)
{
- int fpr = *s - '0';
- ++s;
- if (is_space_char (*s))
- ++s;
- if (*s == ')')
- {
- *end_op = s + 1;
- r = hash_find (reg_hash, "st(0)");
- know (r);
- return r + fpr;
- }
+ bigdisp.bitfield.disp32s = 1;
+ bigdisp.bitfield.disp64 = 1;
}
- /* We have "%st(" then garbage. */
- return (const reg_entry *) NULL;
+ }
+ else if ((flag_code == CODE_16BIT) ^ override)
+ {
+ bigdisp.bitfield.disp32 = 0;
+ bigdisp.bitfield.disp16 = 1;
}
}
-
- if (r != NULL
- && ((r->reg_flags & (RegRex64 | RegRex)) | (r->reg_type & Reg64)) != 0
- && (r->reg_type != Control || !(cpu_arch_flags & CpuSledgehammer))
- && flag_code != CODE_64BIT)
- return (const reg_entry *) NULL;
-
- return r;
-}
-
-/* REG_STRING starts *before* REGISTER_PREFIX. */
-
-static const reg_entry *
-parse_register (char *reg_string, char **end_op)
-{
- const reg_entry *r;
-
- if (*reg_string == REGISTER_PREFIX || allow_naked_reg)
- r = parse_real_register (reg_string, end_op);
else
- r = NULL;
- if (!r)
{
- char *save = input_line_pointer;
- char c;
- symbolS *symbolP;
-
- input_line_pointer = reg_string;
- c = get_symbol_end ();
- symbolP = symbol_find (reg_string);
- if (symbolP && S_GET_SEGMENT (symbolP) == reg_section)
+ /* For PC-relative branches, the width of the displacement
+ is dependent upon data size, not address size. */
+ override = (i.prefix[DATA_PREFIX] != 0);
+ if (flag_code == CODE_64BIT)
{
- const expressionS *e = symbol_get_value_expression (symbolP);
-
- know (e->X_op == O_register);
- know (e->X_add_number >= 0
- && (valueT) e->X_add_number < i386_regtab_size);
- r = i386_regtab + e->X_add_number;
- *end_op = input_line_pointer;
+ if (override || i.suffix == WORD_MNEM_SUFFIX)
+ bigdisp.bitfield.disp16 = 1;
+ else
+ {
+ bigdisp.bitfield.disp32 = 1;
+ bigdisp.bitfield.disp32s = 1;
+ }
+ }
+ else
+ {
+ if (!override)
+ override = (i.suffix == (flag_code != CODE_16BIT
+ ? WORD_MNEM_SUFFIX
+ : LONG_MNEM_SUFFIX));
+ bigdisp.bitfield.disp32 = 1;
+ if ((flag_code == CODE_16BIT) ^ override)
+ {
+ bigdisp.bitfield.disp32 = 0;
+ bigdisp.bitfield.disp16 = 1;
+ }
}
- *input_line_pointer = c;
- input_line_pointer = save;
}
- return r;
-}
+ i.types[this_operand] = operand_type_or (i.types[this_operand],
+ bigdisp);
-int
-i386_parse_name (char *name, expressionS *e, char *nextcharP)
-{
- const reg_entry *r;
- char *end = input_line_pointer;
+ exp = &disp_expressions[i.disp_operands];
+ i.op[this_operand].disps = exp;
+ i.disp_operands++;
+ save_input_line_pointer = input_line_pointer;
+ input_line_pointer = disp_start;
+ END_STRING_AND_SAVE (disp_end);
- *end = *nextcharP;
- r = parse_register (name, &input_line_pointer);
- if (r && end <= input_line_pointer)
+#ifndef GCC_ASM_O_HACK
+#define GCC_ASM_O_HACK 0
+#endif
+#if GCC_ASM_O_HACK
+ END_STRING_AND_SAVE (disp_end + 1);
+ if (i.types[this_operand].bitfield.baseIndex
+ && displacement_string_end[-1] == '+')
{
- *nextcharP = *input_line_pointer;
- *input_line_pointer = 0;
- e->X_op = O_register;
- e->X_add_number = r - i386_regtab;
- return 1;
- }
- input_line_pointer = end;
- *end = 0;
- return 0;
-}
+ /* This hack is to avoid a warning when using the "o"
+ constraint within gcc asm statements.
+ For instance:
-void
-md_operand (expressionS *e)
-{
- if (*input_line_pointer == REGISTER_PREFIX)
- {
- char *end;
- const reg_entry *r = parse_real_register (input_line_pointer, &end);
+ #define _set_tssldt_desc(n,addr,limit,type) \
+ __asm__ __volatile__ ( \
+ "movw %w2,%0\n\t" \
+ "movw %w1,2+%0\n\t" \
+ "rorl $16,%1\n\t" \
+ "movb %b1,4+%0\n\t" \
+ "movb %4,5+%0\n\t" \
+ "movb $0,6+%0\n\t" \
+ "movb %h1,7+%0\n\t" \
+ "rorl $16,%1" \
+ : "=o"(*(n)) : "q" (addr), "ri"(limit), "i"(type))
- if (r)
- {
- e->X_op = O_register;
- e->X_add_number = r - i386_regtab;
- input_line_pointer = end;
- }
- }
-}
+ This works great except that the output assembler ends
+ up looking a bit weird if it turns out that there is
+ no offset. You end up producing code that looks like:
-\f
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
-const char *md_shortopts = "kVQ:sqn";
-#else
-const char *md_shortopts = "qn";
-#endif
+ #APP
+ movw $235,(%eax)
+ movw %dx,2+(%eax)
+ rorl $16,%edx
+ movb %dl,4+(%eax)
+ movb $137,5+(%eax)
+ movb $0,6+(%eax)
+ movb %dh,7+(%eax)
+ rorl $16,%edx
+ #NO_APP
-#define OPTION_32 (OPTION_MD_BASE + 0)
-#define OPTION_64 (OPTION_MD_BASE + 1)
-#define OPTION_DIVIDE (OPTION_MD_BASE + 2)
-#define OPTION_MARCH (OPTION_MD_BASE + 3)
-#define OPTION_MTUNE (OPTION_MD_BASE + 4)
+ So here we provide the missing zero. */
-struct option md_longopts[] =
-{
- {"32", no_argument, NULL, OPTION_32},
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
- {"64", no_argument, NULL, OPTION_64},
+ *displacement_string_end = '0';
+ }
#endif
- {"divide", no_argument, NULL, OPTION_DIVIDE},
- {"march", required_argument, NULL, OPTION_MARCH},
- {"mtune", required_argument, NULL, OPTION_MTUNE},
- {NULL, no_argument, NULL, 0}
-};
-size_t md_longopts_size = sizeof (md_longopts);
+ gotfree_input_line = lex_got (&i.reloc[this_operand], NULL, &types);
+ if (gotfree_input_line)
+ input_line_pointer = gotfree_input_line;
-int
-md_parse_option (int c, char *arg)
-{
- unsigned int i;
+ exp_seg = expression (exp);
- switch (c)
+ SKIP_WHITESPACE ();
+ if (*input_line_pointer)
+ as_bad (_("junk `%s' after expression"), input_line_pointer);
+#if GCC_ASM_O_HACK
+ RESTORE_END_STRING (disp_end + 1);
+#endif
+ input_line_pointer = save_input_line_pointer;
+ if (gotfree_input_line)
{
- case 'n':
- optimize_align_code = 0;
- break;
+ free (gotfree_input_line);
- case 'q':
- quiet_warnings = 1;
- break;
+ if (exp->X_op == O_constant || exp->X_op == O_register)
+ exp->X_op = O_illegal;
+ }
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
- should be emitted or not. FIXME: Not implemented. */
- case 'Q':
- break;
+ ret = i386_finalize_displacement (exp_seg, exp, types, disp_start);
- /* -V: SVR4 argument to print version ID. */
- case 'V':
- print_version_id ();
- break;
+ RESTORE_END_STRING (disp_end);
- /* -k: Ignore for FreeBSD compatibility. */
- case 'k':
- break;
+ return ret;
+}
- case 's':
- /* -s: On i386 Solaris, this tells the native assembler to use
- .stab instead of .stab.excl. We always use .stab anyhow. */
- break;
-#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
- case OPTION_64:
- {
- const char **list, **l;
+static int
+i386_finalize_displacement (segT exp_seg ATTRIBUTE_UNUSED, expressionS *exp,
+ i386_operand_type types, const char *disp_start)
+{
+ i386_operand_type bigdisp;
+ int ret = 1;
- list = bfd_target_list ();
- for (l = list; *l != NULL; l++)
- if (CONST_STRNEQ (*l, "elf64-x86-64")
- || strcmp (*l, "coff-x86-64") == 0
- || strcmp (*l, "pe-x86-64") == 0
- || strcmp (*l, "pei-x86-64") == 0)
- {
- default_arch = "x86_64";
- break;
- }
- if (*l == NULL)
- as_fatal (_("No compiled in support for x86_64"));
- free (list);
- }
- break;
-#endif
+ /* We do this to make sure that the section symbol is in
+ the symbol table. We will ultimately change the relocation
+ to be relative to the beginning of the section. */
+ if (i.reloc[this_operand] == BFD_RELOC_386_GOTOFF
+ || i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL
+ || i.reloc[this_operand] == BFD_RELOC_X86_64_GOTOFF64)
+ {
+ if (exp->X_op != O_symbol)
+ goto inv_disp;
- case OPTION_32:
- default_arch = "i386";
- break;
+ if (S_IS_LOCAL (exp->X_add_symbol)
+ && S_GET_SEGMENT (exp->X_add_symbol) != undefined_section)
+ section_symbol (S_GET_SEGMENT (exp->X_add_symbol));
+ exp->X_op = O_subtract;
+ exp->X_op_symbol = GOT_symbol;
+ if (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTPCREL)
+ i.reloc[this_operand] = BFD_RELOC_32_PCREL;
+ else if (i.reloc[this_operand] == BFD_RELOC_X86_64_GOTOFF64)
+ i.reloc[this_operand] = BFD_RELOC_64;
+ else
+ i.reloc[this_operand] = BFD_RELOC_32;
+ }
- case OPTION_DIVIDE:
-#ifdef SVR4_COMMENT_CHARS
- {
- char *n, *t;
- const char *s;
+ else if (exp->X_op == O_absent
+ || exp->X_op == O_illegal
+ || exp->X_op == O_big)
+ {
+ inv_disp:
+ as_bad (_("missing or invalid displacement expression `%s'"),
+ disp_start);
+ ret = 0;
+ }
- n = (char *) xmalloc (strlen (i386_comment_chars) + 1);
- t = n;
- for (s = i386_comment_chars; *s != '\0'; s++)
- if (*s != '/')
- *t++ = *s;
- *t = '\0';
- i386_comment_chars = n;
- }
+#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
+ else if (exp->X_op != O_constant
+ && OUTPUT_FLAVOR == bfd_target_aout_flavour
+ && exp_seg != absolute_section
+ && exp_seg != text_section
+ && exp_seg != data_section
+ && exp_seg != bss_section
+ && exp_seg != undefined_section
+ && !bfd_is_com_section (exp_seg))
+ {
+ as_bad (_("unimplemented segment %s in operand"), exp_seg->name);
+ ret = 0;
+ }
#endif
- break;
-
- case OPTION_MARCH:
- if (*arg == '.')
- as_fatal (_("Invalid -march= option: `%s'"), arg);
- for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
- {
- if (strcmp (arg, cpu_arch [i].name) == 0)
- {
- cpu_arch_isa = cpu_arch[i].type;
- cpu_arch_isa_flags = cpu_arch[i].flags;
- if (!cpu_arch_tune_set)
- {
- cpu_arch_tune = cpu_arch_isa;
- cpu_arch_tune_flags = cpu_arch_isa_flags;
- }
- break;
- }
- }
- if (i >= ARRAY_SIZE (cpu_arch))
- as_fatal (_("Invalid -march= option: `%s'"), arg);
- break;
- case OPTION_MTUNE:
- if (*arg == '.')
- as_fatal (_("Invalid -mtune= option: `%s'"), arg);
- for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
- {
- if (strcmp (arg, cpu_arch [i].name) == 0)
- {
- cpu_arch_tune_set = 1;
- cpu_arch_tune = cpu_arch [i].type;
- cpu_arch_tune_flags = cpu_arch[i].flags;
- break;
- }
- }
- if (i >= ARRAY_SIZE (cpu_arch))
- as_fatal (_("Invalid -mtune= option: `%s'"), arg);
- break;
+ /* Check if this is a displacement only operand. */
+ bigdisp = i.types[this_operand];
+ bigdisp.bitfield.disp8 = 0;
+ bigdisp.bitfield.disp16 = 0;
+ bigdisp.bitfield.disp32 = 0;
+ bigdisp.bitfield.disp32s = 0;
+ bigdisp.bitfield.disp64 = 0;
+ if (operand_type_all_zero (&bigdisp))
+ i.types[this_operand] = operand_type_and (i.types[this_operand],
+ types);
- default:
- return 0;
- }
- return 1;
+ return ret;
}
-void
-md_show_usage (stream)
- FILE *stream;
+/* Make sure the memory operand we've been dealt is valid.
+ Return 1 on success, 0 on a failure. */
+
+static int
+i386_index_check (const char *operand_string)
{
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- fprintf (stream, _("\
- -Q ignored\n\
- -V print assembler version number\n\
- -k ignored\n"));
-#endif
- fprintf (stream, _("\
- -n Do not optimize code alignment\n\
- -q quieten some warnings\n"));
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- fprintf (stream, _("\
- -s ignored\n"));
-#endif
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined(TE_PEP)
- fprintf (stream, _("\
- --32/--64 generate 32bit/64bit code\n"));
-#endif
-#ifdef SVR4_COMMENT_CHARS
- fprintf (stream, _("\
- --divide do not treat `/' as a comment character\n"));
-#else
- fprintf (stream, _("\
- --divide ignored\n"));
-#endif
- fprintf (stream, _("\
- -march=CPU/-mtune=CPU generate code/optimize for CPU, where CPU is one of:\n\
- i386, i486, pentium, pentiumpro, pentium4, nocona,\n\
- core, core2, k6, athlon, k8, generic32, generic64\n"));
+ int ok;
+ const char *kind = "base/index";
+#if INFER_ADDR_PREFIX
+ int fudged = 0;
-}
+ tryprefix:
+#endif
+ ok = 1;
+ if (current_templates->start->opcode_modifier.isstring
+ && !current_templates->start->opcode_modifier.immext
+ && (current_templates->end[-1].opcode_modifier.isstring
+ || i.mem_operands))
+ {
+ /* Memory operands of string insns are special in that they only allow
+ a single register (rDI, rSI, or rBX) as their memory address. */
+ unsigned int expected;
-#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
- || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) || defined (TE_PEP))
+ kind = "string address";
-/* Pick the target format to use. */
+ if (current_templates->start->opcode_modifier.w)
+ {
+ i386_operand_type type = current_templates->end[-1].operand_types[0];
+
+ if (!type.bitfield.baseindex
+ || ((!i.mem_operands != !intel_syntax)
+ && current_templates->end[-1].operand_types[1]
+ .bitfield.baseindex))
+ type = current_templates->end[-1].operand_types[1];
+ expected = type.bitfield.esseg ? 7 /* rDI */ : 6 /* rSI */;
+ }
+ else
+ expected = 3 /* rBX */;
+
+ if (!i.base_reg || i.index_reg
+ || operand_type_check (i.types[this_operand], disp))
+ ok = -1;
+ else if (!(flag_code == CODE_64BIT
+ ? i.prefix[ADDR_PREFIX]
+ ? i.base_reg->reg_type.bitfield.reg32
+ : i.base_reg->reg_type.bitfield.reg64
+ : (flag_code == CODE_16BIT) ^ !i.prefix[ADDR_PREFIX]
+ ? i.base_reg->reg_type.bitfield.reg32
+ : i.base_reg->reg_type.bitfield.reg16))
+ ok = 0;
+ else if (i.base_reg->reg_num != expected)
+ ok = -1;
-const char *
-i386_target_format (void)
-{
- if (!strcmp (default_arch, "x86_64"))
- {
- set_code_flag (CODE_64BIT);
- if (cpu_arch_isa_flags == 0)
- cpu_arch_isa_flags = Cpu186|Cpu286|Cpu386|Cpu486
- |Cpu586|Cpu686|CpuP4|CpuMMX|CpuMMX2
- |CpuSSE|CpuSSE2;
- if (cpu_arch_tune_flags == 0)
- cpu_arch_tune_flags = Cpu186|Cpu286|Cpu386|Cpu486
- |Cpu586|Cpu686|CpuP4|CpuMMX|CpuMMX2
- |CpuSSE|CpuSSE2;
+ if (ok < 0)
+ {
+ unsigned int j;
+
+ for (j = 0; j < i386_regtab_size; ++j)
+ if ((flag_code == CODE_64BIT
+ ? i.prefix[ADDR_PREFIX]
+ ? i386_regtab[j].reg_type.bitfield.reg32
+ : i386_regtab[j].reg_type.bitfield.reg64
+ : (flag_code == CODE_16BIT) ^ !i.prefix[ADDR_PREFIX]
+ ? i386_regtab[j].reg_type.bitfield.reg32
+ : i386_regtab[j].reg_type.bitfield.reg16)
+ && i386_regtab[j].reg_num == expected)
+ break;
+ gas_assert (j < i386_regtab_size);
+ as_warn (_("`%s' is not valid here (expected `%c%s%s%c')"),
+ operand_string,
+ intel_syntax ? '[' : '(',
+ register_prefix,
+ i386_regtab[j].reg_name,
+ intel_syntax ? ']' : ')');
+ ok = 1;
+ }
}
- else if (!strcmp (default_arch, "i386"))
+ else if (flag_code == CODE_64BIT)
{
- set_code_flag (CODE_32BIT);
- if (cpu_arch_isa_flags == 0)
- cpu_arch_isa_flags = Cpu186|Cpu286|Cpu386;
- if (cpu_arch_tune_flags == 0)
- cpu_arch_tune_flags = Cpu186|Cpu286|Cpu386;
+ if ((i.base_reg
+ && ((i.prefix[ADDR_PREFIX] == 0
+ && !i.base_reg->reg_type.bitfield.reg64)
+ || (i.prefix[ADDR_PREFIX]
+ && !i.base_reg->reg_type.bitfield.reg32))
+ && (i.index_reg
+ || i.base_reg->reg_num !=
+ (i.prefix[ADDR_PREFIX] == 0 ? RegRip : RegEip)))
+ || (i.index_reg
+ && (!i.index_reg->reg_type.bitfield.baseindex
+ || (i.prefix[ADDR_PREFIX] == 0
+ && i.index_reg->reg_num != RegRiz
+ && !i.index_reg->reg_type.bitfield.reg64
+ )
+ || (i.prefix[ADDR_PREFIX]
+ && i.index_reg->reg_num != RegEiz
+ && !i.index_reg->reg_type.bitfield.reg32))))
+ ok = 0;
}
else
- as_fatal (_("Unknown architecture"));
- switch (OUTPUT_FLAVOR)
{
-#ifdef TE_PEP
- case bfd_target_coff_flavour:
- return flag_code == CODE_64BIT ? COFF_TARGET_FORMAT : "coff-i386";
- break;
-#endif
-#ifdef OBJ_MAYBE_AOUT
- case bfd_target_aout_flavour:
- return AOUT_TARGET_FORMAT;
-#endif
-#ifdef OBJ_MAYBE_COFF
- case bfd_target_coff_flavour:
- return "coff-i386";
-#endif
-#if defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF)
- case bfd_target_elf_flavour:
- {
- if (flag_code == CODE_64BIT)
- {
- object_64bit = 1;
- use_rela_relocations = 1;
- }
- return flag_code == CODE_64BIT ? ELF_TARGET_FORMAT64 : ELF_TARGET_FORMAT;
- }
+ if ((flag_code == CODE_16BIT) ^ (i.prefix[ADDR_PREFIX] != 0))
+ {
+ /* 16bit checks. */
+ if ((i.base_reg
+ && (!i.base_reg->reg_type.bitfield.reg16
+ || !i.base_reg->reg_type.bitfield.baseindex))
+ || (i.index_reg
+ && (!i.index_reg->reg_type.bitfield.reg16
+ || !i.index_reg->reg_type.bitfield.baseindex
+ || !(i.base_reg
+ && i.base_reg->reg_num < 6
+ && i.index_reg->reg_num >= 6
+ && i.log2_scale_factor == 0))))
+ ok = 0;
+ }
+ else
+ {
+ /* 32bit checks. */
+ if ((i.base_reg
+ && !i.base_reg->reg_type.bitfield.reg32)
+ || (i.index_reg
+ && ((!i.index_reg->reg_type.bitfield.reg32
+ && i.index_reg->reg_num != RegEiz)
+ || !i.index_reg->reg_type.bitfield.baseindex)))
+ ok = 0;
+ }
+ }
+ if (!ok)
+ {
+#if INFER_ADDR_PREFIX
+ if (!i.mem_operands && !i.prefix[ADDR_PREFIX])
+ {
+ i.prefix[ADDR_PREFIX] = ADDR_PREFIX_OPCODE;
+ i.prefixes += 1;
+ /* Change the size of any displacement too. At most one of
+ Disp16 or Disp32 is set.
+ FIXME. There doesn't seem to be any real need for separate
+ Disp16 and Disp32 flags. The same goes for Imm16 and Imm32.
+ Removing them would probably clean up the code quite a lot. */
+ if (flag_code != CODE_64BIT
+ && (i.types[this_operand].bitfield.disp16
+ || i.types[this_operand].bitfield.disp32))
+ i.types[this_operand]
+ = operand_type_xor (i.types[this_operand], disp16_32);
+ fudged = 1;
+ goto tryprefix;
+ }
+ if (fudged)
+ as_bad (_("`%s' is not a valid %s expression"),
+ operand_string,
+ kind);
+ else
#endif
- default:
- abort ();
- return NULL;
+ as_bad (_("`%s' is not a valid %s-bit %s expression"),
+ operand_string,
+ flag_code_names[i.prefix[ADDR_PREFIX]
+ ? flag_code == CODE_32BIT
+ ? CODE_16BIT
+ : CODE_32BIT
+ : flag_code],
+ kind);
}
+ return ok;
}
-#endif /* OBJ_MAYBE_ more than one */
+/* Parse OPERAND_STRING into the i386_insn structure I. Returns zero
+ on error. */
-#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
-void
-i386_elf_emit_arch_note (void)
+static int
+i386_att_operand (char *operand_string)
{
- if (IS_ELF && cpu_arch_name != NULL)
- {
- char *p;
- asection *seg = now_seg;
- subsegT subseg = now_subseg;
- Elf_Internal_Note i_note;
- Elf_External_Note e_note;
- asection *note_secp;
- int len;
+ const reg_entry *r;
+ char *end_op;
+ char *op_string = operand_string;
- /* Create the .note section. */
- note_secp = subseg_new (".note", 0);
- bfd_set_section_flags (stdoutput,
- note_secp,
- SEC_HAS_CONTENTS | SEC_READONLY);
+ if (is_space_char (*op_string))
+ ++op_string;
- /* Process the arch string. */
- len = strlen (cpu_arch_name);
+ /* We check for an absolute prefix (differentiating,
+ for example, 'jmp pc_relative_label' from 'jmp *absolute_label'. */
+ if (*op_string == ABSOLUTE_PREFIX)
+ {
+ ++op_string;
+ if (is_space_char (*op_string))
+ ++op_string;
+ i.types[this_operand].bitfield.jumpabsolute = 1;
+ }
- i_note.namesz = len + 1;
- i_note.descsz = 0;
- i_note.type = NT_ARCH;
- p = frag_more (sizeof (e_note.namesz));
- md_number_to_chars (p, (valueT) i_note.namesz, sizeof (e_note.namesz));
- p = frag_more (sizeof (e_note.descsz));
- md_number_to_chars (p, (valueT) i_note.descsz, sizeof (e_note.descsz));
- p = frag_more (sizeof (e_note.type));
- md_number_to_chars (p, (valueT) i_note.type, sizeof (e_note.type));
- p = frag_more (len + 1);
- strcpy (p, cpu_arch_name);
+ /* Check if operand is a register. */
+ if ((r = parse_register (op_string, &end_op)) != NULL)
+ {
+ i386_operand_type temp;
- frag_align (2, 0, 0);
+ /* Check for a segment override by searching for ':' after a
+ segment register. */
+ op_string = end_op;
+ if (is_space_char (*op_string))
+ ++op_string;
+ if (*op_string == ':'
+ && (r->reg_type.bitfield.sreg2
+ || r->reg_type.bitfield.sreg3))
+ {
+ switch (r->reg_num)
+ {
+ case 0:
+ i.seg[i.mem_operands] = &es;
+ break;
+ case 1:
+ i.seg[i.mem_operands] = &cs;
+ break;
+ case 2:
+ i.seg[i.mem_operands] = &ss;
+ break;
+ case 3:
+ i.seg[i.mem_operands] = &ds;
+ break;
+ case 4:
+ i.seg[i.mem_operands] = &fs;
+ break;
+ case 5:
+ i.seg[i.mem_operands] = &gs;
+ break;
+ }
- subseg_set (seg, subseg);
+ /* Skip the ':' and whitespace. */
+ ++op_string;
+ if (is_space_char (*op_string))
+ ++op_string;
+
+ if (!is_digit_char (*op_string)
+ && !is_identifier_char (*op_string)
+ && *op_string != '('
+ && *op_string != ABSOLUTE_PREFIX)
+ {
+ as_bad (_("bad memory operand `%s'"), op_string);
+ return 0;
+ }
+ /* Handle case of %es:*foo. */
+ if (*op_string == ABSOLUTE_PREFIX)
+ {
+ ++op_string;
+ if (is_space_char (*op_string))
+ ++op_string;
+ i.types[this_operand].bitfield.jumpabsolute = 1;
+ }
+ goto do_memory_reference;
+ }
+ if (*op_string)
+ {
+ as_bad (_("junk `%s' after register"), op_string);
+ return 0;
+ }
+ temp = r->reg_type;
+ temp.bitfield.baseindex = 0;
+ i.types[this_operand] = operand_type_or (i.types[this_operand],
+ temp);
+ i.types[this_operand].bitfield.unspecified = 0;
+ i.op[this_operand].regs = r;
+ i.reg_operands++;
}
-}
-#endif
-\f
-symbolS *
-md_undefined_symbol (name)
- char *name;
-{
- if (name[0] == GLOBAL_OFFSET_TABLE_NAME[0]
- && name[1] == GLOBAL_OFFSET_TABLE_NAME[1]
- && name[2] == GLOBAL_OFFSET_TABLE_NAME[2]
- && strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)
+ else if (*op_string == REGISTER_PREFIX)
{
- if (!GOT_symbol)
+ as_bad (_("bad register name `%s'"), op_string);
+ return 0;
+ }
+ else if (*op_string == IMMEDIATE_PREFIX)
+ {
+ ++op_string;
+ if (i.types[this_operand].bitfield.jumpabsolute)
{
- if (symbol_find (name))
- as_bad (_("GOT already in symbol table"));
- GOT_symbol = symbol_new (name, undefined_section,
- (valueT) 0, &zero_address_frag);
- };
- return GOT_symbol;
+ as_bad (_("immediate operand illegal with absolute jump"));
+ return 0;
+ }
+ if (!i386_immediate (op_string))
+ return 0;
}
- return 0;
-}
+ else if (is_digit_char (*op_string)
+ || is_identifier_char (*op_string)
+ || *op_string == '(')
+ {
+ /* This is a memory reference of some sort. */
+ char *base_string;
-/* Round up a section size to the appropriate boundary. */
+ /* Start and end of displacement string expression (if found). */
+ char *displacement_string_start;
+ char *displacement_string_end;
-valueT
-md_section_align (segment, size)
- segT segment ATTRIBUTE_UNUSED;
- valueT size;
-{
-#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
- if (OUTPUT_FLAVOR == bfd_target_aout_flavour)
- {
- /* For a.out, force the section size to be aligned. If we don't do
- this, BFD will align it for us, but it will not write out the
- final bytes of the section. This may be a bug in BFD, but it is
- easier to fix it here since that is how the other a.out targets
- work. */
- int align;
+ do_memory_reference:
+ if ((i.mem_operands == 1
+ && !current_templates->start->opcode_modifier.isstring)
+ || i.mem_operands == 2)
+ {
+ as_bad (_("too many memory references for `%s'"),
+ current_templates->start->name);
+ return 0;
+ }
- align = bfd_get_section_alignment (stdoutput, segment);
- size = ((size + (1 << align) - 1) & ((valueT) -1 << align));
- }
-#endif
+ /* Check for base index form. We detect the base index form by
+ looking for an ')' at the end of the operand, searching
+ for the '(' matching it, and finding a REGISTER_PREFIX or ','
+ after the '('. */
+ base_string = op_string + strlen (op_string);
- return size;
-}
+ --base_string;
+ if (is_space_char (*base_string))
+ --base_string;
-/* On the i386, PC-relative offsets are relative to the start of the
- next instruction. That is, the address of the offset, plus its
- size, since the offset is always the last part of the insn. */
+ /* If we only have a displacement, set-up for it to be parsed later. */
+ displacement_string_start = op_string;
+ displacement_string_end = base_string + 1;
-long
-md_pcrel_from (fixS *fixP)
-{
- return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
-}
+ if (*base_string == ')')
+ {
+ char *temp_string;
+ unsigned int parens_balanced = 1;
+ /* We've already checked that the number of left & right ()'s are
+ equal, so this loop will not be infinite. */
+ do
+ {
+ base_string--;
+ if (*base_string == ')')
+ parens_balanced++;
+ if (*base_string == '(')
+ parens_balanced--;
+ }
+ while (parens_balanced);
-#ifndef I386COFF
+ temp_string = base_string;
-static void
-s_bss (int ignore ATTRIBUTE_UNUSED)
-{
- int temp;
+ /* Skip past '(' and whitespace. */
+ ++base_string;
+ if (is_space_char (*base_string))
+ ++base_string;
-#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
- if (IS_ELF)
- obj_elf_section_change_hook ();
-#endif
- temp = get_absolute_expression ();
- subseg_set (bss_section, (subsegT) temp);
- demand_empty_rest_of_line ();
-}
+ if (*base_string == ','
+ || ((i.base_reg = parse_register (base_string, &end_op))
+ != NULL))
+ {
+ displacement_string_end = temp_string;
-#endif
+ i.types[this_operand].bitfield.baseindex = 1;
-void
-i386_validate_fix (fixS *fixp)
-{
- if (fixp->fx_subsy && fixp->fx_subsy == GOT_symbol)
- {
- if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
- {
- if (!object_64bit)
- abort ();
- fixp->fx_r_type = BFD_RELOC_X86_64_GOTPCREL;
- }
- else
- {
- if (!object_64bit)
- fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
- else
- fixp->fx_r_type = BFD_RELOC_X86_64_GOTOFF64;
- }
- fixp->fx_subsy = 0;
- }
-}
+ if (i.base_reg)
+ {
+ base_string = end_op;
+ if (is_space_char (*base_string))
+ ++base_string;
+ }
-arelent *
-tc_gen_reloc (section, fixp)
- asection *section ATTRIBUTE_UNUSED;
- fixS *fixp;
-{
- arelent *rel;
- bfd_reloc_code_real_type code;
+ /* There may be an index reg or scale factor here. */
+ if (*base_string == ',')
+ {
+ ++base_string;
+ if (is_space_char (*base_string))
+ ++base_string;
- switch (fixp->fx_r_type)
- {
- case BFD_RELOC_X86_64_PLT32:
- case BFD_RELOC_X86_64_GOT32:
- case BFD_RELOC_X86_64_GOTPCREL:
- case BFD_RELOC_386_PLT32:
- case BFD_RELOC_386_GOT32:
- case BFD_RELOC_386_GOTOFF:
- case BFD_RELOC_386_GOTPC:
- case BFD_RELOC_386_TLS_GD:
- case BFD_RELOC_386_TLS_LDM:
- case BFD_RELOC_386_TLS_LDO_32:
- case BFD_RELOC_386_TLS_IE_32:
- case BFD_RELOC_386_TLS_IE:
- case BFD_RELOC_386_TLS_GOTIE:
- case BFD_RELOC_386_TLS_LE_32:
- case BFD_RELOC_386_TLS_LE:
- case BFD_RELOC_386_TLS_GOTDESC:
- case BFD_RELOC_386_TLS_DESC_CALL:
- case BFD_RELOC_X86_64_TLSGD:
- case BFD_RELOC_X86_64_TLSLD:
- case BFD_RELOC_X86_64_DTPOFF32:
- case BFD_RELOC_X86_64_DTPOFF64:
- case BFD_RELOC_X86_64_GOTTPOFF:
- case BFD_RELOC_X86_64_TPOFF32:
- case BFD_RELOC_X86_64_TPOFF64:
- case BFD_RELOC_X86_64_GOTOFF64:
- case BFD_RELOC_X86_64_GOTPC32:
- case BFD_RELOC_X86_64_GOT64:
- case BFD_RELOC_X86_64_GOTPCREL64:
- case BFD_RELOC_X86_64_GOTPC64:
- case BFD_RELOC_X86_64_GOTPLT64:
- case BFD_RELOC_X86_64_PLTOFF64:
- case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
- case BFD_RELOC_X86_64_TLSDESC_CALL:
- case BFD_RELOC_RVA:
- case BFD_RELOC_VTABLE_ENTRY:
- case BFD_RELOC_VTABLE_INHERIT:
-#ifdef TE_PE
- case BFD_RELOC_32_SECREL:
-#endif
- code = fixp->fx_r_type;
- break;
- case BFD_RELOC_X86_64_32S:
- if (!fixp->fx_pcrel)
- {
- /* Don't turn BFD_RELOC_X86_64_32S into BFD_RELOC_32. */
- code = fixp->fx_r_type;
- break;
- }
- default:
- if (fixp->fx_pcrel)
- {
- switch (fixp->fx_size)
- {
- default:
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("can not do %d byte pc-relative relocation"),
- fixp->fx_size);
- code = BFD_RELOC_32_PCREL;
- break;
- case 1: code = BFD_RELOC_8_PCREL; break;
- case 2: code = BFD_RELOC_16_PCREL; break;
- case 4: code = BFD_RELOC_32_PCREL; break;
-#ifdef BFD64
- case 8: code = BFD_RELOC_64_PCREL; break;
-#endif
+ if ((i.index_reg = parse_register (base_string, &end_op))
+ != NULL)
+ {
+ base_string = end_op;
+ if (is_space_char (*base_string))
+ ++base_string;
+ if (*base_string == ',')
+ {
+ ++base_string;
+ if (is_space_char (*base_string))
+ ++base_string;
+ }
+ else if (*base_string != ')')
+ {
+ as_bad (_("expecting `,' or `)' "
+ "after index register in `%s'"),
+ operand_string);
+ return 0;
+ }
+ }
+ else if (*base_string == REGISTER_PREFIX)
+ {
+ as_bad (_("bad register name `%s'"), base_string);
+ return 0;
+ }
+
+ /* Check for scale factor. */
+ if (*base_string != ')')
+ {
+ char *end_scale = i386_scale (base_string);
+
+ if (!end_scale)
+ return 0;
+
+ base_string = end_scale;
+ if (is_space_char (*base_string))
+ ++base_string;
+ if (*base_string != ')')
+ {
+ as_bad (_("expecting `)' "
+ "after scale factor in `%s'"),
+ operand_string);
+ return 0;
+ }
+ }
+ else if (!i.index_reg)
+ {
+ as_bad (_("expecting index register or scale factor "
+ "after `,'; got '%c'"),
+ *base_string);
+ return 0;
+ }
+ }
+ else if (*base_string != ')')
+ {
+ as_bad (_("expecting `,' or `)' "
+ "after base register in `%s'"),
+ operand_string);
+ return 0;
+ }
}
- }
- else
- {
- switch (fixp->fx_size)
+ else if (*base_string == REGISTER_PREFIX)
{
- default:
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("can not do %d byte relocation"),
- fixp->fx_size);
- code = BFD_RELOC_32;
- break;
- case 1: code = BFD_RELOC_8; break;
- case 2: code = BFD_RELOC_16; break;
- case 4: code = BFD_RELOC_32; break;
-#ifdef BFD64
- case 8: code = BFD_RELOC_64; break;
-#endif
+ as_bad (_("bad register name `%s'"), base_string);
+ return 0;
}
}
- break;
- }
- if ((code == BFD_RELOC_32
- || code == BFD_RELOC_32_PCREL
- || code == BFD_RELOC_X86_64_32S)
- && GOT_symbol
- && fixp->fx_addsy == GOT_symbol)
- {
- if (!object_64bit)
- code = BFD_RELOC_386_GOTPC;
- else
- code = BFD_RELOC_X86_64_GOTPC32;
- }
- if ((code == BFD_RELOC_64 || code == BFD_RELOC_64_PCREL)
- && GOT_symbol
- && fixp->fx_addsy == GOT_symbol)
- {
- code = BFD_RELOC_X86_64_GOTPC64;
- }
-
- rel = (arelent *) xmalloc (sizeof (arelent));
- rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
- *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
-
- rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
+ /* If there's an expression beginning the operand, parse it,
+ assuming displacement_string_start and
+ displacement_string_end are meaningful. */
+ if (displacement_string_start != displacement_string_end)
+ {
+ if (!i386_displacement (displacement_string_start,
+ displacement_string_end))
+ return 0;
+ }
- if (!use_rela_relocations)
- {
- /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
- vtable entry to be used in the relocation's section offset. */
- if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
- rel->address = fixp->fx_offset;
+ /* Special case for (%dx) while doing input/output op. */
+ if (i.base_reg
+ && operand_type_equal (&i.base_reg->reg_type,
+ ®16_inoutportreg)
+ && i.index_reg == 0
+ && i.log2_scale_factor == 0
+ && i.seg[i.mem_operands] == 0
+ && !operand_type_check (i.types[this_operand], disp))
+ {
+ i.types[this_operand] = inoutportreg;
+ return 1;
+ }
- rel->addend = 0;
+ if (i386_index_check (operand_string) == 0)
+ return 0;
+ i.types[this_operand].bitfield.mem = 1;
+ i.mem_operands++;
}
- /* Use the rela in 64bit mode. */
else
{
- if (!fixp->fx_pcrel)
- rel->addend = fixp->fx_offset;
- else
- switch (code)
- {
- case BFD_RELOC_X86_64_PLT32:
- case BFD_RELOC_X86_64_GOT32:
- case BFD_RELOC_X86_64_GOTPCREL:
- case BFD_RELOC_X86_64_TLSGD:
- case BFD_RELOC_X86_64_TLSLD:
- case BFD_RELOC_X86_64_GOTTPOFF:
- case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
- case BFD_RELOC_X86_64_TLSDESC_CALL:
- rel->addend = fixp->fx_offset - fixp->fx_size;
- break;
- default:
- rel->addend = (section->vma
- - fixp->fx_size
- + fixp->fx_addnumber
- + md_pcrel_from (fixp));
- break;
- }
- }
-
- rel->howto = bfd_reloc_type_lookup (stdoutput, code);
- if (rel->howto == NULL)
- {
- as_bad_where (fixp->fx_file, fixp->fx_line,
- _("cannot represent relocation type %s"),
- bfd_get_reloc_code_name (code));
- /* Set howto to a garbage value so that we can keep going. */
- rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
- assert (rel->howto != NULL);
+ /* It's not a memory operand; argh! */
+ as_bad (_("invalid char %s beginning operand %d `%s'"),
+ output_invalid (*op_string),
+ this_operand + 1,
+ op_string);
+ return 0;
}
-
- return rel;
+ return 1; /* Normal return. */
}
-
\f
-/* Parse operands using Intel syntax. This implements a recursive descent
- parser based on the BNF grammar published in Appendix B of the MASM 6.1
- Programmer's Guide.
+/* md_estimate_size_before_relax()
- FIXME: We do not recognize the full operand grammar defined in the MASM
- documentation. In particular, all the structure/union and
- high-level macro operands are missing.
+ Called just before relax() for rs_machine_dependent frags. The x86
+ assembler uses these frags to handle variable size jump
+ instructions.
- Uppercase words are terminals, lower case words are non-terminals.
- Objects surrounded by double brackets '[[' ']]' are optional. Vertical
- bars '|' denote choices. Most grammar productions are implemented in
- functions called 'intel_<production>'.
+ Any symbol that is now undefined will not become defined.
+ Return the correct fr_subtype in the frag.
+ Return the initial "guess for variable size of frag" to caller.
+ The guess is actually the growth beyond the fixed part. Whatever
+ we do to grow the fixed or variable part contributes to our
+ returned value. */
- Initial production is 'expr'.
+int
+md_estimate_size_before_relax (fragP, segment)
+ fragS *fragP;
+ segT segment;
+{
+ /* We've already got fragP->fr_subtype right; all we have to do is
+ check for un-relaxable symbols. On an ELF system, we can't relax
+ an externally visible symbol, because it may be overridden by a
+ shared library. */
+ if (S_GET_SEGMENT (fragP->fr_symbol) != segment
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ || (IS_ELF
+ && (S_IS_EXTERNAL (fragP->fr_symbol)
+ || S_IS_WEAK (fragP->fr_symbol)
+ || ((symbol_get_bfdsym (fragP->fr_symbol)->flags
+ & BSF_GNU_INDIRECT_FUNCTION))))
+#endif
+#if defined (OBJ_COFF) && defined (TE_PE)
+ || (OUTPUT_FLAVOR == bfd_target_coff_flavour
+ && S_IS_WEAK (fragP->fr_symbol))
+#endif
+ )
+ {
+ /* Symbol is undefined in this segment, or we need to keep a
+ reloc so that weak symbols can be overridden. */
+ int size = (fragP->fr_subtype & CODE16) ? 2 : 4;
+ enum bfd_reloc_code_real reloc_type;
+ unsigned char *opcode;
+ int old_fr_fix;
- addOp + | -
+ if (fragP->fr_var != NO_RELOC)
+ reloc_type = (enum bfd_reloc_code_real) fragP->fr_var;
+ else if (size == 2)
+ reloc_type = BFD_RELOC_16_PCREL;
+ else
+ reloc_type = BFD_RELOC_32_PCREL;
- alpha [a-zA-Z]
+ old_fr_fix = fragP->fr_fix;
+ opcode = (unsigned char *) fragP->fr_opcode;
- binOp & | AND | \| | OR | ^ | XOR
+ switch (TYPE_FROM_RELAX_STATE (fragP->fr_subtype))
+ {
+ case UNCOND_JUMP:
+ /* Make jmp (0xeb) a (d)word displacement jump. */
+ opcode[0] = 0xe9;
+ fragP->fr_fix += size;
+ fix_new (fragP, old_fr_fix, size,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ reloc_type);
+ break;
- byteRegister AL | AH | BL | BH | CL | CH | DL | DH
+ case COND_JUMP86:
+ if (size == 2
+ && (!no_cond_jump_promotion || fragP->fr_var != NO_RELOC))
+ {
+ /* Negate the condition, and branch past an
+ unconditional jump. */
+ opcode[0] ^= 1;
+ opcode[1] = 3;
+ /* Insert an unconditional jump. */
+ opcode[2] = 0xe9;
+ /* We added two extra opcode bytes, and have a two byte
+ offset. */
+ fragP->fr_fix += 2 + 2;
+ fix_new (fragP, old_fr_fix + 2, 2,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ reloc_type);
+ break;
+ }
+ /* Fall through. */
- constant digits [[ radixOverride ]]
+ case COND_JUMP:
+ if (no_cond_jump_promotion && fragP->fr_var == NO_RELOC)
+ {
+ fixS *fixP;
- dataType BYTE | WORD | DWORD | FWORD | QWORD | TBYTE | OWORD | XMMWORD
+ fragP->fr_fix += 1;
+ fixP = fix_new (fragP, old_fr_fix, 1,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ BFD_RELOC_8_PCREL);
+ fixP->fx_signed = 1;
+ break;
+ }
- digits decdigit
- | digits decdigit
- | digits hexdigit
+ /* This changes the byte-displacement jump 0x7N
+ to the (d)word-displacement jump 0x0f,0x8N. */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ /* We've added an opcode byte. */
+ fragP->fr_fix += 1 + size;
+ fix_new (fragP, old_fr_fix + 1, size,
+ fragP->fr_symbol,
+ fragP->fr_offset, 1,
+ reloc_type);
+ break;
- decdigit [0-9]
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
+ }
+ frag_wane (fragP);
+ return fragP->fr_fix - old_fr_fix;
+ }
- e04 e04 addOp e05
- | e05
+ /* Guess size depending on current relax state. Initially the relax
+ state will correspond to a short jump and we return 1, because
+ the variable part of the frag (the branch offset) is one byte
+ long. However, we can relax a section more than once and in that
+ case we must either set fr_subtype back to the unrelaxed state,
+ or return the value for the appropriate branch. */
+ return md_relax_table[fragP->fr_subtype].rlx_length;
+}
- e05 e05 binOp e06
- | e06
+/* Called after relax() is finished.
- e06 e06 mulOp e09
- | e09
+ In: Address of frag.
+ fr_type == rs_machine_dependent.
+ fr_subtype is what the address relaxed to.
- e09 OFFSET e10
- | SHORT e10
- | + e10
- | - e10
- | ~ e10
- | NOT e10
- | e09 PTR e10
- | e09 : e10
- | e10
+ Out: Any fixSs and constants are set up.
+ Caller will turn frag into a ".space 0". */
- e10 e10 [ expr ]
- | e11
+void
+md_convert_frag (abfd, sec, fragP)
+ bfd *abfd ATTRIBUTE_UNUSED;
+ segT sec ATTRIBUTE_UNUSED;
+ fragS *fragP;
+{
+ unsigned char *opcode;
+ unsigned char *where_to_put_displacement = NULL;
+ offsetT target_address;
+ offsetT opcode_address;
+ unsigned int extension = 0;
+ offsetT displacement_from_opcode_start;
- e11 ( expr )
- | [ expr ]
- | constant
- | dataType
- | id
- | $
- | register
+ opcode = (unsigned char *) fragP->fr_opcode;
- => expr expr cmpOp e04
- | e04
+ /* Address we want to reach in file space. */
+ target_address = S_GET_VALUE (fragP->fr_symbol) + fragP->fr_offset;
- gpRegister AX | EAX | BX | EBX | CX | ECX | DX | EDX
- | BP | EBP | SP | ESP | DI | EDI | SI | ESI
+ /* Address opcode resides at in file space. */
+ opcode_address = fragP->fr_address + fragP->fr_fix;
- hexdigit a | b | c | d | e | f
- | A | B | C | D | E | F
+ /* Displacement from opcode start to fill into instruction. */
+ displacement_from_opcode_start = target_address - opcode_address;
- id alpha
- | id alpha
- | id decdigit
+ if ((fragP->fr_subtype & BIG) == 0)
+ {
+ /* Don't have to change opcode. */
+ extension = 1; /* 1 opcode + 1 displacement */
+ where_to_put_displacement = &opcode[1];
+ }
+ else
+ {
+ if (no_cond_jump_promotion
+ && TYPE_FROM_RELAX_STATE (fragP->fr_subtype) != UNCOND_JUMP)
+ as_warn_where (fragP->fr_file, fragP->fr_line,
+ _("long jump required"));
- mulOp * | / | % | MOD | << | SHL | >> | SHR
+ switch (fragP->fr_subtype)
+ {
+ case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG):
+ extension = 4; /* 1 opcode + 4 displacement */
+ opcode[0] = 0xe9;
+ where_to_put_displacement = &opcode[1];
+ break;
- quote " | '
+ case ENCODE_RELAX_STATE (UNCOND_JUMP, BIG16):
+ extension = 2; /* 1 opcode + 2 displacement */
+ opcode[0] = 0xe9;
+ where_to_put_displacement = &opcode[1];
+ break;
- register specialRegister
- | gpRegister
- | byteRegister
+ case ENCODE_RELAX_STATE (COND_JUMP, BIG):
+ case ENCODE_RELAX_STATE (COND_JUMP86, BIG):
+ extension = 5; /* 2 opcode + 4 displacement */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ where_to_put_displacement = &opcode[2];
+ break;
- segmentRegister CS | DS | ES | FS | GS | SS
+ case ENCODE_RELAX_STATE (COND_JUMP, BIG16):
+ extension = 3; /* 2 opcode + 2 displacement */
+ opcode[1] = opcode[0] + 0x10;
+ opcode[0] = TWO_BYTE_OPCODE_ESCAPE;
+ where_to_put_displacement = &opcode[2];
+ break;
- specialRegister CR0 | CR2 | CR3 | CR4
- | DR0 | DR1 | DR2 | DR3 | DR6 | DR7
- | TR3 | TR4 | TR5 | TR6 | TR7
+ case ENCODE_RELAX_STATE (COND_JUMP86, BIG16):
+ extension = 4;
+ opcode[0] ^= 1;
+ opcode[1] = 3;
+ opcode[2] = 0xe9;
+ where_to_put_displacement = &opcode[3];
+ break;
- We simplify the grammar in obvious places (e.g., register parsing is
- done by calling parse_register) and eliminate immediate left recursion
- to implement a recursive-descent parser.
+ default:
+ BAD_CASE (fragP->fr_subtype);
+ break;
+ }
+ }
- expr e04 expr'
+ /* If size if less then four we are sure that the operand fits,
+ but if it's 4, then it could be that the displacement is larger
+ then -/+ 2GB. */
+ if (DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype) == 4
+ && object_64bit
+ && ((addressT) (displacement_from_opcode_start - extension
+ + ((addressT) 1 << 31))
+ > (((addressT) 2 << 31) - 1)))
+ {
+ as_bad_where (fragP->fr_file, fragP->fr_line,
+ _("jump target out of range"));
+ /* Make us emit 0. */
+ displacement_from_opcode_start = extension;
+ }
+ /* Now put displacement after opcode. */
+ md_number_to_chars ((char *) where_to_put_displacement,
+ (valueT) (displacement_from_opcode_start - extension),
+ DISP_SIZE_FROM_RELAX_STATE (fragP->fr_subtype));
+ fragP->fr_fix += extension;
+}
+\f
+/* Apply a fixup (fixS) to segment data, once it has been determined
+ by our caller that we have all the info we need to fix it up.
- expr' cmpOp e04 expr'
- | Empty
+ On the 386, immediates, displacements, and data pointers are all in
+ the same (little-endian) format, so we don't need to care about which
+ we are handling. */
- e04 e05 e04'
+void
+md_apply_fix (fixP, valP, seg)
+ /* The fix we're to put in. */
+ fixS *fixP;
+ /* Pointer to the value of the bits. */
+ valueT *valP;
+ /* Segment fix is from. */
+ segT seg ATTRIBUTE_UNUSED;
+{
+ char *p = fixP->fx_where + fixP->fx_frag->fr_literal;
+ valueT value = *valP;
- e04' addOp e05 e04'
- | Empty
+#if !defined (TE_Mach)
+ if (fixP->fx_pcrel)
+ {
+ switch (fixP->fx_r_type)
+ {
+ default:
+ break;
- e05 e06 e05'
+ case BFD_RELOC_64:
+ fixP->fx_r_type = BFD_RELOC_64_PCREL;
+ break;
+ case BFD_RELOC_32:
+ case BFD_RELOC_X86_64_32S:
+ fixP->fx_r_type = BFD_RELOC_32_PCREL;
+ break;
+ case BFD_RELOC_16:
+ fixP->fx_r_type = BFD_RELOC_16_PCREL;
+ break;
+ case BFD_RELOC_8:
+ fixP->fx_r_type = BFD_RELOC_8_PCREL;
+ break;
+ }
+ }
- e05' binOp e06 e05'
- | Empty
+ if (fixP->fx_addsy != NULL
+ && (fixP->fx_r_type == BFD_RELOC_32_PCREL
+ || fixP->fx_r_type == BFD_RELOC_64_PCREL
+ || fixP->fx_r_type == BFD_RELOC_16_PCREL
+ || fixP->fx_r_type == BFD_RELOC_8_PCREL)
+ && !use_rela_relocations)
+ {
+ /* This is a hack. There should be a better way to handle this.
+ This covers for the fact that bfd_install_relocation will
+ subtract the current location (for partial_inplace, PC relative
+ relocations); see more below. */
+#ifndef OBJ_AOUT
+ if (IS_ELF
+#ifdef TE_PE
+ || OUTPUT_FLAVOR == bfd_target_coff_flavour
+#endif
+ )
+ value += fixP->fx_where + fixP->fx_frag->fr_address;
+#endif
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ if (IS_ELF)
+ {
+ segT sym_seg = S_GET_SEGMENT (fixP->fx_addsy);
- e06 e09 e06'
+ if ((sym_seg == seg
+ || (symbol_section_p (fixP->fx_addsy)
+ && sym_seg != absolute_section))
+ && !generic_force_reloc (fixP))
+ {
+ /* Yes, we add the values in twice. This is because
+ bfd_install_relocation subtracts them out again. I think
+ bfd_install_relocation is broken, but I don't dare change
+ it. FIXME. */
+ value += fixP->fx_where + fixP->fx_frag->fr_address;
+ }
+ }
+#endif
+#if defined (OBJ_COFF) && defined (TE_PE)
+ /* For some reason, the PE format does not store a
+ section address offset for a PC relative symbol. */
+ if (S_GET_SEGMENT (fixP->fx_addsy) != seg
+ || S_IS_WEAK (fixP->fx_addsy))
+ value += md_pcrel_from (fixP);
+#endif
+ }
+#if defined (OBJ_COFF) && defined (TE_PE)
+ if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy))
+ {
+ value -= S_GET_VALUE (fixP->fx_addsy);
+ }
+#endif
- e06' mulOp e09 e06'
- | Empty
+ /* Fix a few things - the dynamic linker expects certain values here,
+ and we must not disappoint it. */
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ if (IS_ELF && fixP->fx_addsy)
+ switch (fixP->fx_r_type)
+ {
+ case BFD_RELOC_386_PLT32:
+ case BFD_RELOC_X86_64_PLT32:
+ /* Make the jump instruction point to the address of the operand. At
+ runtime we merely add the offset to the actual PLT entry. */
+ value = -4;
+ break;
- e09 OFFSET e10 e09'
- | SHORT e10'
- | + e10'
- | - e10'
- | ~ e10'
- | NOT e10'
- | e10 e09'
+ case BFD_RELOC_386_TLS_GD:
+ case BFD_RELOC_386_TLS_LDM:
+ case BFD_RELOC_386_TLS_IE_32:
+ case BFD_RELOC_386_TLS_IE:
+ case BFD_RELOC_386_TLS_GOTIE:
+ case BFD_RELOC_386_TLS_GOTDESC:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
+ value = 0; /* Fully resolved at runtime. No addend. */
+ /* Fallthrough */
+ case BFD_RELOC_386_TLS_LE:
+ case BFD_RELOC_386_TLS_LDO_32:
+ case BFD_RELOC_386_TLS_LE_32:
+ case BFD_RELOC_X86_64_DTPOFF32:
+ case BFD_RELOC_X86_64_DTPOFF64:
+ case BFD_RELOC_X86_64_TPOFF32:
+ case BFD_RELOC_X86_64_TPOFF64:
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ break;
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty
+ case BFD_RELOC_386_TLS_DESC_CALL:
+ case BFD_RELOC_X86_64_TLSDESC_CALL:
+ value = 0; /* Fully resolved at runtime. No addend. */
+ S_SET_THREAD_LOCAL (fixP->fx_addsy);
+ fixP->fx_done = 0;
+ return;
- e10 e11 e10'
+ case BFD_RELOC_386_GOT32:
+ case BFD_RELOC_X86_64_GOT32:
+ value = 0; /* Fully resolved at runtime. No addend. */
+ break;
- e10' [ expr ] e10'
- | Empty
+ case BFD_RELOC_VTABLE_INHERIT:
+ case BFD_RELOC_VTABLE_ENTRY:
+ fixP->fx_done = 0;
+ return;
- e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | .
- | $
- | register
- | id
- | constant */
+ default:
+ break;
+ }
+#endif /* defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) */
+ *valP = value;
+#endif /* !defined (TE_Mach) */
-/* Parsing structure for the intel syntax parser. Used to implement the
- semantic actions for the operand grammar. */
-struct intel_parser_s
- {
- char *op_string; /* The string being parsed. */
- int got_a_float; /* Whether the operand is a float. */
- int op_modifier; /* Operand modifier. */
- int is_mem; /* 1 if operand is memory reference. */
- int in_offset; /* >=1 if parsing operand of offset. */
- int in_bracket; /* >=1 if parsing operand in brackets. */
- const reg_entry *reg; /* Last register reference found. */
- char *disp; /* Displacement string being built. */
- char *next_operand; /* Resume point when splitting operands. */
- };
+ /* Are we finished with this relocation now? */
+ if (fixP->fx_addsy == NULL)
+ fixP->fx_done = 1;
+#if defined (OBJ_COFF) && defined (TE_PE)
+ else if (fixP->fx_addsy != NULL && S_IS_WEAK (fixP->fx_addsy))
+ {
+ fixP->fx_done = 0;
+ /* Remember value for tc_gen_reloc. */
+ fixP->fx_addnumber = value;
+ /* Clear out the frag for now. */
+ value = 0;
+ }
+#endif
+ else if (use_rela_relocations)
+ {
+ fixP->fx_no_overflow = 1;
+ /* Remember value for tc_gen_reloc. */
+ fixP->fx_addnumber = value;
+ value = 0;
+ }
-static struct intel_parser_s intel_parser;
+ md_number_to_chars (p, value, fixP->fx_size);
+}
+\f
+char *
+md_atof (int type, char *litP, int *sizeP)
+{
+ /* This outputs the LITTLENUMs in REVERSE order;
+ in accord with the bigendian 386. */
+ return ieee_md_atof (type, litP, sizeP, FALSE);
+}
+\f
+static char output_invalid_buf[sizeof (unsigned char) * 2 + 6];
-/* Token structure for parsing intel syntax. */
-struct intel_token
- {
- int code; /* Token code. */
- const reg_entry *reg; /* Register entry for register tokens. */
- char *str; /* String representation. */
- };
+static char *
+output_invalid (int c)
+{
+ if (ISPRINT (c))
+ snprintf (output_invalid_buf, sizeof (output_invalid_buf),
+ "'%c'", c);
+ else
+ snprintf (output_invalid_buf, sizeof (output_invalid_buf),
+ "(0x%x)", (unsigned char) c);
+ return output_invalid_buf;
+}
-static struct intel_token cur_token, prev_token;
-
-/* Token codes for the intel parser. Since T_SHORT is already used
- by COFF, undefine it first to prevent a warning. */
-#define T_NIL -1
-#define T_CONST 1
-#define T_REG 2
-#define T_BYTE 3
-#define T_WORD 4
-#define T_DWORD 5
-#define T_FWORD 6
-#define T_QWORD 7
-#define T_TBYTE 8
-#define T_XMMWORD 9
-#undef T_SHORT
-#define T_SHORT 10
-#define T_OFFSET 11
-#define T_PTR 12
-#define T_ID 13
-#define T_SHL 14
-#define T_SHR 15
-
-/* Prototypes for intel parser functions. */
-static int intel_match_token (int);
-static void intel_putback_token (void);
-static void intel_get_token (void);
-static int intel_expr (void);
-static int intel_e04 (void);
-static int intel_e05 (void);
-static int intel_e06 (void);
-static int intel_e09 (void);
-static int intel_e10 (void);
-static int intel_e11 (void);
+/* REG_STRING starts *before* REGISTER_PREFIX. */
-static int
-i386_intel_operand (char *operand_string, int got_a_float)
+static const reg_entry *
+parse_real_register (char *reg_string, char **end_op)
{
- int ret;
+ char *s = reg_string;
char *p;
+ char reg_name_given[MAX_REG_NAME_SIZE + 1];
+ const reg_entry *r;
+
+ /* Skip possible REGISTER_PREFIX and possible whitespace. */
+ if (*s == REGISTER_PREFIX)
+ ++s;
- p = intel_parser.op_string = xstrdup (operand_string);
- intel_parser.disp = (char *) xmalloc (strlen (operand_string) + 1);
+ if (is_space_char (*s))
+ ++s;
- for (;;)
+ p = reg_name_given;
+ while ((*p++ = register_chars[(unsigned char) *s]) != '\0')
{
- /* Initialize token holders. */
- cur_token.code = prev_token.code = T_NIL;
- cur_token.reg = prev_token.reg = NULL;
- cur_token.str = prev_token.str = NULL;
+ if (p >= reg_name_given + MAX_REG_NAME_SIZE)
+ return (const reg_entry *) NULL;
+ s++;
+ }
- /* Initialize parser structure. */
- intel_parser.got_a_float = got_a_float;
- intel_parser.op_modifier = 0;
- intel_parser.is_mem = 0;
- intel_parser.in_offset = 0;
- intel_parser.in_bracket = 0;
- intel_parser.reg = NULL;
- intel_parser.disp[0] = '\0';
- intel_parser.next_operand = NULL;
+ /* For naked regs, make sure that we are not dealing with an identifier.
+ This prevents confusing an identifier like `eax_var' with register
+ `eax'. */
+ if (allow_naked_reg && identifier_chars[(unsigned char) *s])
+ return (const reg_entry *) NULL;
- /* Read the first token and start the parser. */
- intel_get_token ();
- ret = intel_expr ();
+ *end_op = s;
- if (!ret)
- break;
+ r = (const reg_entry *) hash_find (reg_hash, reg_name_given);
- if (cur_token.code != T_NIL)
- {
- as_bad (_("invalid operand for '%s' ('%s' unexpected)"),
- current_templates->start->name, cur_token.str);
- ret = 0;
- }
- /* If we found a memory reference, hand it over to i386_displacement
- to fill in the rest of the operand fields. */
- else if (intel_parser.is_mem)
+ /* Handle floating point regs, allowing spaces in the (i) part. */
+ if (r == i386_regtab /* %st is first entry of table */)
+ {
+ if (is_space_char (*s))
+ ++s;
+ if (*s == '(')
{
- if ((i.mem_operands == 1
- && (current_templates->start->opcode_modifier & IsString) == 0)
- || i.mem_operands == 2)
- {
- as_bad (_("too many memory references for '%s'"),
- current_templates->start->name);
- ret = 0;
- }
- else
+ ++s;
+ if (is_space_char (*s))
+ ++s;
+ if (*s >= '0' && *s <= '7')
{
- char *s = intel_parser.disp;
- i.mem_operands++;
-
- if (!quiet_warnings && intel_parser.is_mem < 0)
- /* See the comments in intel_bracket_expr. */
- as_warn (_("Treating `%s' as memory reference"), operand_string);
-
- /* Add the displacement expression. */
- if (*s != '\0')
- ret = i386_displacement (s, s + strlen (s));
- if (ret)
+ int fpr = *s - '0';
+ ++s;
+ if (is_space_char (*s))
+ ++s;
+ if (*s == ')')
{
- /* Swap base and index in 16-bit memory operands like
- [si+bx]. Since i386_index_check is also used in AT&T
- mode we have to do that here. */
- if (i.base_reg
- && i.index_reg
- && (i.base_reg->reg_type & Reg16)
- && (i.index_reg->reg_type & Reg16)
- && i.base_reg->reg_num >= 6
- && i.index_reg->reg_num < 6)
- {
- const reg_entry *base = i.index_reg;
-
- i.index_reg = i.base_reg;
- i.base_reg = base;
- }
- ret = i386_index_check (operand_string);
+ *end_op = s + 1;
+ r = (const reg_entry *) hash_find (reg_hash, "st(0)");
+ know (r);
+ return r + fpr;
}
}
+ /* We have "%st(" then garbage. */
+ return (const reg_entry *) NULL;
}
-
- /* Constant and OFFSET expressions are handled by i386_immediate. */
- else if ((intel_parser.op_modifier & (1 << T_OFFSET))
- || intel_parser.reg == NULL)
- ret = i386_immediate (intel_parser.disp);
-
- if (intel_parser.next_operand && this_operand >= MAX_OPERANDS - 1)
- ret = 0;
- if (!ret || !intel_parser.next_operand)
- break;
- intel_parser.op_string = intel_parser.next_operand;
- this_operand = i.operands++;
}
- free (p);
- free (intel_parser.disp);
-
- return ret;
-}
-
-#define NUM_ADDRESS_REGS (!!i.base_reg + !!i.index_reg)
-
-/* expr e04 expr'
-
- expr' cmpOp e04 expr'
- | Empty */
-static int
-intel_expr (void)
-{
- /* XXX Implement the comparison operators. */
- return intel_e04 ();
-}
-
-/* e04 e05 e04'
-
- e04' addOp e05 e04'
- | Empty */
-static int
-intel_e04 (void)
-{
- int nregs = -1;
-
- for (;;)
- {
- if (!intel_e05())
- return 0;
+ if (r == NULL || allow_pseudo_reg)
+ return r;
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL; /* al is invalid as base */
+ if (operand_type_all_zero (&r->reg_type))
+ return (const reg_entry *) NULL;
- if (cur_token.code == '+')
- nregs = -1;
- else if (cur_token.code == '-')
- nregs = NUM_ADDRESS_REGS;
- else
- return 1;
+ if ((r->reg_type.bitfield.reg32
+ || r->reg_type.bitfield.sreg3
+ || r->reg_type.bitfield.control
+ || r->reg_type.bitfield.debug
+ || r->reg_type.bitfield.test)
+ && !cpu_arch_flags.bitfield.cpui386)
+ return (const reg_entry *) NULL;
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
- }
-}
+ if (r->reg_type.bitfield.floatreg
+ && !cpu_arch_flags.bitfield.cpu8087
+ && !cpu_arch_flags.bitfield.cpu287
+ && !cpu_arch_flags.bitfield.cpu387)
+ return (const reg_entry *) NULL;
-/* e05 e06 e05'
+ if (r->reg_type.bitfield.regmmx && !cpu_arch_flags.bitfield.cpummx)
+ return (const reg_entry *) NULL;
- e05' binOp e06 e05'
- | Empty */
-static int
-intel_e05 (void)
-{
- int nregs = ~NUM_ADDRESS_REGS;
+ if (r->reg_type.bitfield.regxmm && !cpu_arch_flags.bitfield.cpusse)
+ return (const reg_entry *) NULL;
- for (;;)
- {
- if (!intel_e06())
- return 0;
+ if (r->reg_type.bitfield.regymm && !cpu_arch_flags.bitfield.cpuavx)
+ return (const reg_entry *) NULL;
- if (cur_token.code == '&'
- || cur_token.code == '|'
- || cur_token.code == '^')
- {
- char str[2];
+ /* Don't allow fake index register unless allow_index_reg isn't 0. */
+ if (!allow_index_reg
+ && (r->reg_num == RegEiz || r->reg_num == RegRiz))
+ return (const reg_entry *) NULL;
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
- else
- break;
+ if (((r->reg_flags & (RegRex64 | RegRex))
+ || r->reg_type.bitfield.reg64)
+ && (!cpu_arch_flags.bitfield.cpulm
+ || !operand_type_equal (&r->reg_type, &control))
+ && flag_code != CODE_64BIT)
+ return (const reg_entry *) NULL;
- intel_match_token (cur_token.code);
+ if (r->reg_type.bitfield.sreg3 && r->reg_num == RegFlat && !intel_syntax)
+ return (const reg_entry *) NULL;
- if (nregs < 0)
- nregs = ~nregs;
- }
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 1; /* cl is invalid as base */
- return 1;
+ return r;
}
-/* e06 e09 e06'
+/* REG_STRING starts *before* REGISTER_PREFIX. */
- e06' mulOp e09 e06'
- | Empty */
-static int
-intel_e06 (void)
+static const reg_entry *
+parse_register (char *reg_string, char **end_op)
{
- int nregs = ~NUM_ADDRESS_REGS;
+ const reg_entry *r;
- for (;;)
+ if (*reg_string == REGISTER_PREFIX || allow_naked_reg)
+ r = parse_real_register (reg_string, end_op);
+ else
+ r = NULL;
+ if (!r)
{
- if (!intel_e09())
- return 0;
+ char *save = input_line_pointer;
+ char c;
+ symbolS *symbolP;
- if (cur_token.code == '*'
- || cur_token.code == '/'
- || cur_token.code == '%')
+ input_line_pointer = reg_string;
+ c = get_symbol_end ();
+ symbolP = symbol_find (reg_string);
+ if (symbolP && S_GET_SEGMENT (symbolP) == reg_section)
{
- char str[2];
+ const expressionS *e = symbol_get_value_expression (symbolP);
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
+ know (e->X_op == O_register);
+ know (e->X_add_number >= 0
+ && (valueT) e->X_add_number < i386_regtab_size);
+ r = i386_regtab + e->X_add_number;
+ *end_op = input_line_pointer;
}
- else if (cur_token.code == T_SHL)
- strcat (intel_parser.disp, "<<");
- else if (cur_token.code == T_SHR)
- strcat (intel_parser.disp, ">>");
- else
- break;
+ *input_line_pointer = c;
+ input_line_pointer = save;
+ }
+ return r;
+}
- intel_match_token (cur_token.code);
+int
+i386_parse_name (char *name, expressionS *e, char *nextcharP)
+{
+ const reg_entry *r;
+ char *end = input_line_pointer;
- if (nregs < 0)
- nregs = ~nregs;
+ *end = *nextcharP;
+ r = parse_register (name, &input_line_pointer);
+ if (r && end <= input_line_pointer)
+ {
+ *nextcharP = *input_line_pointer;
+ *input_line_pointer = 0;
+ e->X_op = O_register;
+ e->X_add_number = r - i386_regtab;
+ return 1;
}
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 2; /* dl is invalid as base */
- return 1;
+ input_line_pointer = end;
+ *end = 0;
+ return intel_syntax ? i386_intel_parse_name (name, e) : 0;
}
-/* e09 OFFSET e09
- | SHORT e09
- | + e09
- | - e09
- | ~ e09
- | NOT e09
- | e10 e09'
-
- e09' PTR e10 e09'
- | : e10 e09'
- | Empty */
-static int
-intel_e09 (void)
+void
+md_operand (expressionS *e)
{
- int nregs = ~NUM_ADDRESS_REGS;
- int in_offset = 0;
+ char *end;
+ const reg_entry *r;
- for (;;)
+ switch (*input_line_pointer)
{
- /* Don't consume constants here. */
- if (cur_token.code == '+' || cur_token.code == '-')
+ case REGISTER_PREFIX:
+ r = parse_real_register (input_line_pointer, &end);
+ if (r)
{
- /* Need to look one token ahead - if the next token
- is a constant, the current token is its sign. */
- int next_code;
-
- intel_match_token (cur_token.code);
- next_code = cur_token.code;
- intel_putback_token ();
- if (next_code == T_CONST)
- break;
+ e->X_op = O_register;
+ e->X_add_number = r - i386_regtab;
+ input_line_pointer = end;
}
+ break;
- /* e09 OFFSET e09 */
- if (cur_token.code == T_OFFSET)
+ case '[':
+ gas_assert (intel_syntax);
+ end = input_line_pointer++;
+ expression (e);
+ if (*input_line_pointer == ']')
{
- if (!in_offset++)
- ++intel_parser.in_offset;
+ ++input_line_pointer;
+ e->X_op_symbol = make_expr_symbol (e);
+ e->X_add_symbol = NULL;
+ e->X_add_number = 0;
+ e->X_op = O_index;
}
+ else
+ {
+ e->X_op = O_absent;
+ input_line_pointer = end;
+ }
+ break;
+ }
+}
- /* e09 SHORT e09 */
- else if (cur_token.code == T_SHORT)
- intel_parser.op_modifier |= 1 << T_SHORT;
+\f
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+const char *md_shortopts = "kVQ:sqn";
+#else
+const char *md_shortopts = "qn";
+#endif
- /* e09 + e09 */
- else if (cur_token.code == '+')
- strcat (intel_parser.disp, "+");
+#define OPTION_32 (OPTION_MD_BASE + 0)
+#define OPTION_64 (OPTION_MD_BASE + 1)
+#define OPTION_DIVIDE (OPTION_MD_BASE + 2)
+#define OPTION_MARCH (OPTION_MD_BASE + 3)
+#define OPTION_MTUNE (OPTION_MD_BASE + 4)
+#define OPTION_MMNEMONIC (OPTION_MD_BASE + 5)
+#define OPTION_MSYNTAX (OPTION_MD_BASE + 6)
+#define OPTION_MINDEX_REG (OPTION_MD_BASE + 7)
+#define OPTION_MNAKED_REG (OPTION_MD_BASE + 8)
+#define OPTION_MOLD_GCC (OPTION_MD_BASE + 9)
+#define OPTION_MSSE2AVX (OPTION_MD_BASE + 10)
+#define OPTION_MSSE_CHECK (OPTION_MD_BASE + 11)
- /* e09 - e09
- | ~ e09
- | NOT e09 */
- else if (cur_token.code == '-' || cur_token.code == '~')
- {
- char str[2];
+struct option md_longopts[] =
+{
+ {"32", no_argument, NULL, OPTION_32},
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
+ {"64", no_argument, NULL, OPTION_64},
+#endif
+ {"divide", no_argument, NULL, OPTION_DIVIDE},
+ {"march", required_argument, NULL, OPTION_MARCH},
+ {"mtune", required_argument, NULL, OPTION_MTUNE},
+ {"mmnemonic", required_argument, NULL, OPTION_MMNEMONIC},
+ {"msyntax", required_argument, NULL, OPTION_MSYNTAX},
+ {"mindex-reg", no_argument, NULL, OPTION_MINDEX_REG},
+ {"mnaked-reg", no_argument, NULL, OPTION_MNAKED_REG},
+ {"mold-gcc", no_argument, NULL, OPTION_MOLD_GCC},
+ {"msse2avx", no_argument, NULL, OPTION_MSSE2AVX},
+ {"msse-check", required_argument, NULL, OPTION_MSSE_CHECK},
+ {NULL, no_argument, NULL, 0}
+};
+size_t md_longopts_size = sizeof (md_longopts);
- if (nregs < 0)
- nregs = ~nregs;
- str[0] = cur_token.code;
- str[1] = 0;
- strcat (intel_parser.disp, str);
- }
+int
+md_parse_option (int c, char *arg)
+{
+ unsigned int i;
+ char *arch, *next;
- /* e09 e10 e09' */
- else
- break;
+ switch (c)
+ {
+ case 'n':
+ optimize_align_code = 0;
+ break;
- intel_match_token (cur_token.code);
- }
+ case 'q':
+ quiet_warnings = 1;
+ break;
- for (;;)
- {
- if (!intel_e10 ())
- return 0;
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ /* -Qy, -Qn: SVR4 arguments controlling whether a .comment section
+ should be emitted or not. FIXME: Not implemented. */
+ case 'Q':
+ break;
- /* e09' PTR e10 e09' */
- if (cur_token.code == T_PTR)
- {
- char suffix;
+ /* -V: SVR4 argument to print version ID. */
+ case 'V':
+ print_version_id ();
+ break;
- if (prev_token.code == T_BYTE)
- suffix = BYTE_MNEM_SUFFIX;
+ /* -k: Ignore for FreeBSD compatibility. */
+ case 'k':
+ break;
- else if (prev_token.code == T_WORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- else if (intel_parser.got_a_float == 2) /* "fi..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = WORD_MNEM_SUFFIX;
- }
+ case 's':
+ /* -s: On i386 Solaris, this tells the native assembler to use
+ .stab instead of .stab.excl. We always use .stab anyhow. */
+ break;
+#endif
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
+ case OPTION_64:
+ {
+ const char **list, **l;
- else if (prev_token.code == T_DWORD)
+ list = bfd_target_list ();
+ for (l = list; *l != NULL; l++)
+ if (CONST_STRNEQ (*l, "elf64-x86-64")
+ || strcmp (*l, "coff-x86-64") == 0
+ || strcmp (*l, "pe-x86-64") == 0
+ || strcmp (*l, "pei-x86-64") == 0)
{
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = WORD_MNEM_SUFFIX;
- else if (flag_code == CODE_16BIT
- && (current_templates->start->opcode_modifier
- & (Jump | JumpDword)))
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = SHORT_MNEM_SUFFIX;
- else
- suffix = LONG_MNEM_SUFFIX;
+ default_arch = "x86_64";
+ break;
}
+ if (*l == NULL)
+ as_fatal (_("No compiled in support for x86_64"));
+ free (list);
+ }
+ break;
+#endif
- else if (prev_token.code == T_FWORD)
- {
- if (current_templates->start->name[0] == 'l'
- && current_templates->start->name[2] == 's'
- && current_templates->start->name[3] == 0)
- suffix = LONG_MNEM_SUFFIX;
- else if (!intel_parser.got_a_float)
- {
- if (flag_code == CODE_16BIT)
- add_prefix (DATA_PREFIX_OPCODE);
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- }
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
+ case OPTION_32:
+ default_arch = "i386";
+ break;
- else if (prev_token.code == T_QWORD)
- {
- if (intel_parser.got_a_float == 1) /* "f..." */
- suffix = LONG_MNEM_SUFFIX;
- else
- suffix = QWORD_MNEM_SUFFIX;
- }
+ case OPTION_DIVIDE:
+#ifdef SVR4_COMMENT_CHARS
+ {
+ char *n, *t;
+ const char *s;
- else if (prev_token.code == T_TBYTE)
- {
- if (intel_parser.got_a_float == 1)
- suffix = LONG_DOUBLE_MNEM_SUFFIX;
- else
- suffix = BYTE_MNEM_SUFFIX; /* so it will cause an error */
- }
+ n = (char *) xmalloc (strlen (i386_comment_chars) + 1);
+ t = n;
+ for (s = i386_comment_chars; *s != '\0'; s++)
+ if (*s != '/')
+ *t++ = *s;
+ *t = '\0';
+ i386_comment_chars = n;
+ }
+#endif
+ break;
- else if (prev_token.code == T_XMMWORD)
+ case OPTION_MARCH:
+ arch = xstrdup (arg);
+ do
+ {
+ if (*arch == '.')
+ as_fatal (_("Invalid -march= option: `%s'"), arg);
+ next = strchr (arch, '+');
+ if (next)
+ *next++ = '\0';
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
{
- /* XXX ignored for now, but accepted since gcc uses it */
- suffix = 0;
- }
+ if (strcmp (arch, cpu_arch [i].name) == 0)
+ {
+ /* Processor. */
+ cpu_arch_name = cpu_arch[i].name;
+ cpu_sub_arch_name = NULL;
+ cpu_arch_flags = cpu_arch[i].flags;
+ cpu_arch_isa = cpu_arch[i].type;
+ cpu_arch_isa_flags = cpu_arch[i].flags;
+ if (!cpu_arch_tune_set)
+ {
+ cpu_arch_tune = cpu_arch_isa;
+ cpu_arch_tune_flags = cpu_arch_isa_flags;
+ }
+ break;
+ }
+ else if (*cpu_arch [i].name == '.'
+ && strcmp (arch, cpu_arch [i].name + 1) == 0)
+ {
+ /* ISA entension. */
+ i386_cpu_flags flags;
- else
- {
- as_bad (_("Unknown operand modifier `%s'"), prev_token.str);
- return 0;
+ if (strncmp (arch, "no", 2))
+ flags = cpu_flags_or (cpu_arch_flags,
+ cpu_arch[i].flags);
+ else
+ flags = cpu_flags_and_not (cpu_arch_flags,
+ cpu_arch[i].flags);
+ if (!cpu_flags_equal (&flags, &cpu_arch_flags))
+ {
+ if (cpu_sub_arch_name)
+ {
+ char *name = cpu_sub_arch_name;
+ cpu_sub_arch_name = concat (name,
+ cpu_arch[i].name,
+ (const char *) NULL);
+ free (name);
+ }
+ else
+ cpu_sub_arch_name = xstrdup (cpu_arch[i].name);
+ cpu_arch_flags = flags;
+ }
+ break;
+ }
}
- /* Operands for jump/call using 'ptr' notation denote absolute
- addresses. */
- if (current_templates->start->opcode_modifier & (Jump | JumpDword))
- i.types[this_operand] |= JumpAbsolute;
-
- if (current_templates->start->base_opcode == 0x8d /* lea */)
- ;
- else if (!i.suffix)
- i.suffix = suffix;
- else if (i.suffix != suffix)
- {
- as_bad (_("Conflicting operand modifiers"));
- return 0;
- }
+ if (i >= ARRAY_SIZE (cpu_arch))
+ as_fatal (_("Invalid -march= option: `%s'"), arg);
+ arch = next;
}
+ while (next != NULL );
+ break;
- /* e09' : e10 e09' */
- else if (cur_token.code == ':')
+ case OPTION_MTUNE:
+ if (*arg == '.')
+ as_fatal (_("Invalid -mtune= option: `%s'"), arg);
+ for (i = 0; i < ARRAY_SIZE (cpu_arch); i++)
{
- if (prev_token.code != T_REG)
+ if (strcmp (arg, cpu_arch [i].name) == 0)
{
- /* While {call,jmp} SSSS:OOOO is MASM syntax only when SSSS is a
- segment/group identifier (which we don't have), using comma
- as the operand separator there is even less consistent, since
- there all branches only have a single operand. */
- if (this_operand != 0
- || intel_parser.in_offset
- || intel_parser.in_bracket
- || (!(current_templates->start->opcode_modifier
- & (Jump|JumpDword|JumpInterSegment))
- && !(current_templates->start->operand_types[0]
- & JumpAbsolute)))
- return intel_match_token (T_NIL);
- /* Remember the start of the 2nd operand and terminate 1st
- operand here.
- XXX This isn't right, yet (when SSSS:OOOO is right operand of
- another expression), but it gets at least the simplest case
- (a plain number or symbol on the left side) right. */
- intel_parser.next_operand = intel_parser.op_string;
- *--intel_parser.op_string = '\0';
- return intel_match_token (':');
+ cpu_arch_tune_set = 1;
+ cpu_arch_tune = cpu_arch [i].type;
+ cpu_arch_tune_flags = cpu_arch[i].flags;
+ break;
}
}
+ if (i >= ARRAY_SIZE (cpu_arch))
+ as_fatal (_("Invalid -mtune= option: `%s'"), arg);
+ break;
- /* e09' Empty */
+ case OPTION_MMNEMONIC:
+ if (strcasecmp (arg, "att") == 0)
+ intel_mnemonic = 0;
+ else if (strcasecmp (arg, "intel") == 0)
+ intel_mnemonic = 1;
else
- break;
-
- intel_match_token (cur_token.code);
-
- }
-
- if (in_offset)
- {
- --intel_parser.in_offset;
- if (nregs < 0)
- nregs = ~nregs;
- if (NUM_ADDRESS_REGS > nregs)
- {
- as_bad (_("Invalid operand to `OFFSET'"));
- return 0;
- }
- intel_parser.op_modifier |= 1 << T_OFFSET;
- }
-
- if (nregs >= 0 && NUM_ADDRESS_REGS > nregs)
- i.base_reg = i386_regtab + REGNAM_AL + 3; /* bl is invalid as base */
- return 1;
-}
-
-static int
-intel_bracket_expr (void)
-{
- int was_offset = intel_parser.op_modifier & (1 << T_OFFSET);
- const char *start = intel_parser.op_string;
- int len;
-
- if (i.op[this_operand].regs)
- return intel_match_token (T_NIL);
+ as_fatal (_("Invalid -mmnemonic= option: `%s'"), arg);
+ break;
- intel_match_token ('[');
+ case OPTION_MSYNTAX:
+ if (strcasecmp (arg, "att") == 0)
+ intel_syntax = 0;
+ else if (strcasecmp (arg, "intel") == 0)
+ intel_syntax = 1;
+ else
+ as_fatal (_("Invalid -msyntax= option: `%s'"), arg);
+ break;
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. If it's an offset expression, we need to keep
- the brace in. */
- if (!intel_parser.in_offset)
- {
- ++intel_parser.in_bracket;
+ case OPTION_MINDEX_REG:
+ allow_index_reg = 1;
+ break;
- /* Operands for jump/call inside brackets denote absolute addresses. */
- if (current_templates->start->opcode_modifier & (Jump | JumpDword))
- i.types[this_operand] |= JumpAbsolute;
+ case OPTION_MNAKED_REG:
+ allow_naked_reg = 1;
+ break;
- /* Unfortunately gas always diverged from MASM in a respect that can't
- be easily fixed without risking to break code sequences likely to be
- encountered (the testsuite even check for this): MASM doesn't consider
- an expression inside brackets unconditionally as a memory reference.
- When that is e.g. a constant, an offset expression, or the sum of the
- two, this is still taken as a constant load. gas, however, always
- treated these as memory references. As a compromise, we'll try to make
- offset expressions inside brackets work the MASM way (since that's
- less likely to be found in real world code), but make constants alone
- continue to work the traditional gas way. In either case, issue a
- warning. */
- intel_parser.op_modifier &= ~was_offset;
- }
- else
- strcat (intel_parser.disp, "[");
+ case OPTION_MOLD_GCC:
+ old_gcc = 1;
+ break;
- /* Add a '+' to the displacement string if necessary. */
- if (*intel_parser.disp != '\0'
- && *(intel_parser.disp + strlen (intel_parser.disp) - 1) != '+')
- strcat (intel_parser.disp, "+");
+ case OPTION_MSSE2AVX:
+ sse2avx = 1;
+ break;
- if (intel_expr ()
- && (len = intel_parser.op_string - start - 1,
- intel_match_token (']')))
- {
- /* Preserve brackets when the operand is an offset expression. */
- if (intel_parser.in_offset)
- strcat (intel_parser.disp, "]");
+ case OPTION_MSSE_CHECK:
+ if (strcasecmp (arg, "error") == 0)
+ sse_check = sse_check_error;
+ else if (strcasecmp (arg, "warning") == 0)
+ sse_check = sse_check_warning;
+ else if (strcasecmp (arg, "none") == 0)
+ sse_check = sse_check_none;
else
- {
- --intel_parser.in_bracket;
- if (i.base_reg || i.index_reg)
- intel_parser.is_mem = 1;
- if (!intel_parser.is_mem)
- {
- if (!(intel_parser.op_modifier & (1 << T_OFFSET)))
- /* Defer the warning until all of the operand was parsed. */
- intel_parser.is_mem = -1;
- else if (!quiet_warnings)
- as_warn (_("`[%.*s]' taken to mean just `%.*s'"),
- len, start, len, start);
- }
- }
- intel_parser.op_modifier |= was_offset;
+ as_fatal (_("Invalid -msse-check= option: `%s'"), arg);
+ break;
- return 1;
+ default:
+ return 0;
}
- return 0;
+ return 1;
}
-/* e10 e11 e10'
-
- e10' [ expr ] e10'
- | Empty */
-static int
-intel_e10 (void)
+void
+md_show_usage (stream)
+ FILE *stream;
{
- if (!intel_e11 ())
- return 0;
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ fprintf (stream, _("\
+ -Q ignored\n\
+ -V print assembler version number\n\
+ -k ignored\n"));
+#endif
+ fprintf (stream, _("\
+ -n Do not optimize code alignment\n\
+ -q quieten some warnings\n"));
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ fprintf (stream, _("\
+ -s ignored\n"));
+#endif
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP))
+ fprintf (stream, _("\
+ --32/--64 generate 32bit/64bit code\n"));
+#endif
+#ifdef SVR4_COMMENT_CHARS
+ fprintf (stream, _("\
+ --divide do not treat `/' as a comment character\n"));
+#else
+ fprintf (stream, _("\
+ --divide ignored\n"));
+#endif
+ fprintf (stream, _("\
+ -march=CPU[,+EXTENSION...]\n\
+ generate code for CPU and EXTENSION, CPU is one of:\n\
+ i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
+ pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
+ core, core2, corei7, l1om, k6, k6_2, athlon, k8,\n\
+ amdfam10, generic32, generic64\n\
+ EXTENSION is combination of:\n\
+ 8087, 287, 387, no87, mmx, nommx, sse, sse2, sse3,\n\
+ ssse3, sse4.1, sse4.2, sse4, nosse, avx, noavx,\n\
+ vmx, smx, xsave, movbe, ept, aes, pclmul, fma,\n\
+ clflush, syscall, rdtscp, 3dnow, 3dnowa, sse4a,\n\
+ svme, abm, padlock, fma4\n"));
+ fprintf (stream, _("\
+ -mtune=CPU optimize for CPU, CPU is one of:\n\
+ i8086, i186, i286, i386, i486, pentium, pentiumpro,\n\
+ pentiumii, pentiumiii, pentium4, prescott, nocona,\n\
+ core, core2, corei7, l1om, k6, k6_2, athlon, k8,\n\
+ amdfam10, generic32, generic64\n"));
+ fprintf (stream, _("\
+ -msse2avx encode SSE instructions with VEX prefix\n"));
+ fprintf (stream, _("\
+ -msse-check=[none|error|warning]\n\
+ check SSE instructions\n"));
+ fprintf (stream, _("\
+ -mmnemonic=[att|intel] use AT&T/Intel mnemonic\n"));
+ fprintf (stream, _("\
+ -msyntax=[att|intel] use AT&T/Intel syntax\n"));
+ fprintf (stream, _("\
+ -mindex-reg support pseudo index registers\n"));
+ fprintf (stream, _("\
+ -mnaked-reg don't require `%%' prefix for registers\n"));
+ fprintf (stream, _("\
+ -mold-gcc support old (<= 2.8.1) versions of gcc\n"));
+}
- while (cur_token.code == '[')
- {
- if (!intel_bracket_expr ())
- return 0;
- }
+#if ((defined (OBJ_MAYBE_COFF) && defined (OBJ_MAYBE_AOUT)) \
+ || defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF) \
+ || defined (TE_PE) || defined (TE_PEP) || defined (OBJ_MACH_O))
- return 1;
-}
+/* Pick the target format to use. */
-/* e11 ( expr )
- | [ expr ]
- | BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD
- | $
- | .
- | register
- | id
- | constant */
-static int
-intel_e11 (void)
+const char *
+i386_target_format (void)
{
- switch (cur_token.code)
+ if (!strcmp (default_arch, "x86_64"))
{
- /* e11 ( expr ) */
- case '(':
- intel_match_token ('(');
- strcat (intel_parser.disp, "(");
-
- if (intel_expr () && intel_match_token (')'))
+ set_code_flag (CODE_64BIT);
+ if (cpu_flags_all_zero (&cpu_arch_isa_flags))
{
- strcat (intel_parser.disp, ")");
- return 1;
+ cpu_arch_isa_flags.bitfield.cpui186 = 1;
+ cpu_arch_isa_flags.bitfield.cpui286 = 1;
+ cpu_arch_isa_flags.bitfield.cpui386 = 1;
+ cpu_arch_isa_flags.bitfield.cpui486 = 1;
+ cpu_arch_isa_flags.bitfield.cpui586 = 1;
+ cpu_arch_isa_flags.bitfield.cpui686 = 1;
+ cpu_arch_isa_flags.bitfield.cpuclflush = 1;
+ cpu_arch_isa_flags.bitfield.cpummx= 1;
+ cpu_arch_isa_flags.bitfield.cpusse = 1;
+ cpu_arch_isa_flags.bitfield.cpusse2 = 1;
+ cpu_arch_isa_flags.bitfield.cpulm = 1;
}
- return 0;
-
- /* e11 [ expr ] */
- case '[':
- return intel_bracket_expr ();
-
- /* e11 $
- | . */
- case '.':
- strcat (intel_parser.disp, cur_token.str);
- intel_match_token (cur_token.code);
-
- /* Mark as a memory operand only if it's not already known to be an
- offset expression. */
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
-
- return 1;
-
- /* e11 register */
- case T_REG:
+ if (cpu_flags_all_zero (&cpu_arch_tune_flags))
+ {
+ cpu_arch_tune_flags.bitfield.cpui186 = 1;
+ cpu_arch_tune_flags.bitfield.cpui286 = 1;
+ cpu_arch_tune_flags.bitfield.cpui386 = 1;
+ cpu_arch_tune_flags.bitfield.cpui486 = 1;
+ cpu_arch_tune_flags.bitfield.cpui586 = 1;
+ cpu_arch_tune_flags.bitfield.cpui686 = 1;
+ cpu_arch_tune_flags.bitfield.cpuclflush = 1;
+ cpu_arch_tune_flags.bitfield.cpummx= 1;
+ cpu_arch_tune_flags.bitfield.cpusse = 1;
+ cpu_arch_tune_flags.bitfield.cpusse2 = 1;
+ }
+ }
+ else if (!strcmp (default_arch, "i386"))
+ {
+ set_code_flag (CODE_32BIT);
+ if (cpu_flags_all_zero (&cpu_arch_isa_flags))
+ {
+ cpu_arch_isa_flags.bitfield.cpui186 = 1;
+ cpu_arch_isa_flags.bitfield.cpui286 = 1;
+ cpu_arch_isa_flags.bitfield.cpui386 = 1;
+ }
+ if (cpu_flags_all_zero (&cpu_arch_tune_flags))
+ {
+ cpu_arch_tune_flags.bitfield.cpui186 = 1;
+ cpu_arch_tune_flags.bitfield.cpui286 = 1;
+ cpu_arch_tune_flags.bitfield.cpui386 = 1;
+ }
+ }
+ else
+ as_fatal (_("Unknown architecture"));
+ switch (OUTPUT_FLAVOR)
+ {
+#if defined (OBJ_MAYBE_AOUT) || defined (OBJ_AOUT)
+ case bfd_target_aout_flavour:
+ return AOUT_TARGET_FORMAT;
+#endif
+#if defined (OBJ_MAYBE_COFF) || defined (OBJ_COFF)
+# if defined (TE_PE) || defined (TE_PEP)
+ case bfd_target_coff_flavour:
+ return flag_code == CODE_64BIT ? "pe-x86-64" : "pe-i386";
+# elif defined (TE_GO32)
+ case bfd_target_coff_flavour:
+ return "coff-go32";
+# else
+ case bfd_target_coff_flavour:
+ return "coff-i386";
+# endif
+#endif
+#if defined (OBJ_MAYBE_ELF) || defined (OBJ_ELF)
+ case bfd_target_elf_flavour:
{
- const reg_entry *reg = intel_parser.reg = cur_token.reg;
-
- intel_match_token (T_REG);
-
- /* Check for segment change. */
- if (cur_token.code == ':')
- {
- if (!(reg->reg_type & (SReg2 | SReg3)))
- {
- as_bad (_("`%s' is not a valid segment register"),
- reg->reg_name);
- return 0;
- }
- else if (i.seg[i.mem_operands])
- as_warn (_("Extra segment override ignored"));
- else
- {
- if (!intel_parser.in_offset)
- intel_parser.is_mem = 1;
- switch (reg->reg_num)
- {
- case 0:
- i.seg[i.mem_operands] = &es;
- break;
- case 1:
- i.seg[i.mem_operands] = &cs;
- break;
- case 2:
- i.seg[i.mem_operands] = &ss;
- break;
- case 3:
- i.seg[i.mem_operands] = &ds;
- break;
- case 4:
- i.seg[i.mem_operands] = &fs;
- break;
- case 5:
- i.seg[i.mem_operands] = &gs;
- break;
- }
- }
- }
-
- /* Not a segment register. Check for register scaling. */
- else if (cur_token.code == '*')
- {
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed in memory operands"));
- return 0;
- }
-
- if (reg->reg_type & Reg16) /* Disallow things like [si*1]. */
- reg = i386_regtab + REGNAM_AX + 4; /* sp is invalid as index */
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4; /* esp is invalid as index */
-
- /* What follows must be a valid scale. */
- intel_match_token ('*');
- i.index_reg = reg;
- i.types[this_operand] |= BaseIndex;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (cur_token.code == '+' || cur_token.code == '-')
- {
- char *str, sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (str + 1, cur_token.str);
- *str = sign;
- if (!i386_scale (str))
- return 0;
- free (str);
- }
- else if (!i386_scale (cur_token.str))
- return 0;
- intel_match_token (cur_token.code);
- }
-
- /* No scaling. If this is a memory operand, the register is either a
- base register (first occurrence) or an index register (second
- occurrence). */
- else if (intel_parser.in_bracket)
+ if (flag_code == CODE_64BIT)
{
-
- if (!i.base_reg)
- i.base_reg = reg;
- else if (!i.index_reg)
- i.index_reg = reg;
- else
- {
- as_bad (_("Too many register references in memory operand"));
- return 0;
- }
-
- i.types[this_operand] |= BaseIndex;
+ object_64bit = 1;
+ use_rela_relocations = 1;
}
-
- /* It's neither base nor index. */
- else if (!intel_parser.in_offset && !intel_parser.is_mem)
+ if (cpu_arch_isa == PROCESSOR_L1OM)
{
- i.types[this_operand] |= reg->reg_type & ~BaseIndex;
- i.op[this_operand].regs = reg;
- i.reg_operands++;
+ if (flag_code != CODE_64BIT)
+ as_fatal (_("Intel L1OM is 64bit only"));
+ return ELF_TARGET_L1OM_FORMAT;
}
else
- {
- as_bad (_("Invalid use of register"));
- return 0;
- }
-
- /* Since registers are not part of the displacement string (except
- when we're parsing offset operands), we may need to remove any
- preceding '+' from the displacement string. */
- if (*intel_parser.disp != '\0'
- && !intel_parser.in_offset)
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
-
- return 1;
+ return (flag_code == CODE_64BIT
+ ? ELF_TARGET_FORMAT64 : ELF_TARGET_FORMAT);
}
+#endif
+#if defined (OBJ_MACH_O)
+ case bfd_target_mach_o_flavour:
+ return flag_code == CODE_64BIT ? "mach-o-x86-64" : "mach-o-i386";
+#endif
+ default:
+ abort ();
+ return NULL;
+ }
+}
- /* e11 BYTE
- | WORD
- | DWORD
- | FWORD
- | QWORD
- | TBYTE
- | OWORD
- | XMMWORD */
- case T_BYTE:
- case T_WORD:
- case T_DWORD:
- case T_FWORD:
- case T_QWORD:
- case T_TBYTE:
- case T_XMMWORD:
- intel_match_token (cur_token.code);
-
- if (cur_token.code == T_PTR)
- return 1;
-
- /* It must have been an identifier. */
- intel_putback_token ();
- cur_token.code = T_ID;
- /* FALLTHRU */
-
- /* e11 id
- | constant */
- case T_ID:
- if (!intel_parser.in_offset && intel_parser.is_mem <= 0)
- {
- symbolS *symbolP;
-
- /* The identifier represents a memory reference only if it's not
- preceded by an offset modifier and if it's not an equate. */
- symbolP = symbol_find(cur_token.str);
- if (!symbolP || S_GET_SEGMENT(symbolP) != absolute_section)
- intel_parser.is_mem = 1;
- }
- /* FALLTHRU */
-
- case T_CONST:
- case '-':
- case '+':
- {
- char *save_str, sign = 0;
-
- /* Allow constants that start with `+' or `-'. */
- if (cur_token.code == '-' || cur_token.code == '+')
- {
- sign = cur_token.code;
- intel_match_token (cur_token.code);
- if (cur_token.code != T_CONST)
- {
- as_bad (_("Syntax error: Expecting a constant, got `%s'"),
- cur_token.str);
- return 0;
- }
- }
-
- save_str = (char *) xmalloc (strlen (cur_token.str) + 2);
- strcpy (save_str + !!sign, cur_token.str);
- if (sign)
- *save_str = sign;
-
- /* Get the next token to check for register scaling. */
- intel_match_token (cur_token.code);
-
- /* Check if this constant is a scaling factor for an
- index register. */
- if (cur_token.code == '*')
- {
- if (intel_match_token ('*') && cur_token.code == T_REG)
- {
- const reg_entry *reg = cur_token.reg;
-
- if (!intel_parser.in_bracket)
- {
- as_bad (_("Register scaling only allowed "
- "in memory operands"));
- return 0;
- }
-
- /* Disallow things like [1*si].
- sp and esp are invalid as index. */
- if (reg->reg_type & Reg16)
- reg = i386_regtab + REGNAM_AX + 4;
- else if (i.index_reg)
- reg = i386_regtab + REGNAM_EAX + 4;
-
- /* The constant is followed by `* reg', so it must be
- a valid scale. */
- i.index_reg = reg;
- i.types[this_operand] |= BaseIndex;
-
- /* Set the scale after setting the register (otherwise,
- i386_scale will complain) */
- if (!i386_scale (save_str))
- return 0;
- intel_match_token (T_REG);
+#endif /* OBJ_MAYBE_ more than one */
- /* Since registers are not part of the displacement
- string, we may need to remove any preceding '+' from
- the displacement string. */
- if (*intel_parser.disp != '\0')
- {
- char *s = intel_parser.disp;
- s += strlen (s) - 1;
- if (*s == '+')
- *s = '\0';
- }
+#if (defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF))
+void
+i386_elf_emit_arch_note (void)
+{
+ if (IS_ELF && cpu_arch_name != NULL)
+ {
+ char *p;
+ asection *seg = now_seg;
+ subsegT subseg = now_subseg;
+ Elf_Internal_Note i_note;
+ Elf_External_Note e_note;
+ asection *note_secp;
+ int len;
- free (save_str);
+ /* Create the .note section. */
+ note_secp = subseg_new (".note", 0);
+ bfd_set_section_flags (stdoutput,
+ note_secp,
+ SEC_HAS_CONTENTS | SEC_READONLY);
- return 1;
- }
+ /* Process the arch string. */
+ len = strlen (cpu_arch_name);
- /* The constant was not used for register scaling. Since we have
- already consumed the token following `*' we now need to put it
- back in the stream. */
- intel_putback_token ();
- }
+ i_note.namesz = len + 1;
+ i_note.descsz = 0;
+ i_note.type = NT_ARCH;
+ p = frag_more (sizeof (e_note.namesz));
+ md_number_to_chars (p, (valueT) i_note.namesz, sizeof (e_note.namesz));
+ p = frag_more (sizeof (e_note.descsz));
+ md_number_to_chars (p, (valueT) i_note.descsz, sizeof (e_note.descsz));
+ p = frag_more (sizeof (e_note.type));
+ md_number_to_chars (p, (valueT) i_note.type, sizeof (e_note.type));
+ p = frag_more (len + 1);
+ strcpy (p, cpu_arch_name);
- /* Add the constant to the displacement string. */
- strcat (intel_parser.disp, save_str);
- free (save_str);
+ frag_align (2, 0, 0);
- return 1;
- }
+ subseg_set (seg, subseg);
}
-
- as_bad (_("Unrecognized token '%s'"), cur_token.str);
- return 0;
}
-
-/* Match the given token against cur_token. If they match, read the next
- token from the operand string. */
-static int
-intel_match_token (int code)
+#endif
+\f
+symbolS *
+md_undefined_symbol (name)
+ char *name;
{
- if (cur_token.code == code)
- {
- intel_get_token ();
- return 1;
- }
- else
+ if (name[0] == GLOBAL_OFFSET_TABLE_NAME[0]
+ && name[1] == GLOBAL_OFFSET_TABLE_NAME[1]
+ && name[2] == GLOBAL_OFFSET_TABLE_NAME[2]
+ && strcmp (name, GLOBAL_OFFSET_TABLE_NAME) == 0)
{
- as_bad (_("Unexpected token `%s'"), cur_token.str);
- return 0;
+ if (!GOT_symbol)
+ {
+ if (symbol_find (name))
+ as_bad (_("GOT already in symbol table"));
+ GOT_symbol = symbol_new (name, undefined_section,
+ (valueT) 0, &zero_address_frag);
+ };
+ return GOT_symbol;
}
+ return 0;
}
-/* Read a new token from intel_parser.op_string and store it in cur_token. */
-static void
-intel_get_token (void)
-{
- char *end_op;
- const reg_entry *reg;
- struct intel_token new_token;
-
- new_token.code = T_NIL;
- new_token.reg = NULL;
- new_token.str = NULL;
-
- /* Free the memory allocated to the previous token and move
- cur_token to prev_token. */
- if (prev_token.str)
- free (prev_token.str);
-
- prev_token = cur_token;
+/* Round up a section size to the appropriate boundary. */
- /* Skip whitespace. */
- while (is_space_char (*intel_parser.op_string))
- intel_parser.op_string++;
+valueT
+md_section_align (segment, size)
+ segT segment ATTRIBUTE_UNUSED;
+ valueT size;
+{
+#if (defined (OBJ_AOUT) || defined (OBJ_MAYBE_AOUT))
+ if (OUTPUT_FLAVOR == bfd_target_aout_flavour)
+ {
+ /* For a.out, force the section size to be aligned. If we don't do
+ this, BFD will align it for us, but it will not write out the
+ final bytes of the section. This may be a bug in BFD, but it is
+ easier to fix it here since that is how the other a.out targets
+ work. */
+ int align;
- /* Return an empty token if we find nothing else on the line. */
- if (*intel_parser.op_string == '\0')
- {
- cur_token = new_token;
- return;
+ align = bfd_get_section_alignment (stdoutput, segment);
+ size = ((size + (1 << align) - 1) & ((valueT) -1 << align));
}
+#endif
- /* The new token cannot be larger than the remainder of the operand
- string. */
- new_token.str = (char *) xmalloc (strlen (intel_parser.op_string) + 1);
- new_token.str[0] = '\0';
+ return size;
+}
- if (strchr ("0123456789", *intel_parser.op_string))
- {
- char *p = new_token.str;
- char *q = intel_parser.op_string;
- new_token.code = T_CONST;
+/* On the i386, PC-relative offsets are relative to the start of the
+ next instruction. That is, the address of the offset, plus its
+ size, since the offset is always the last part of the insn. */
- /* Allow any kind of identifier char to encompass floating point and
- hexadecimal numbers. */
- while (is_identifier_char (*q))
- *p++ = *q++;
- *p = '\0';
+long
+md_pcrel_from (fixS *fixP)
+{
+ return fixP->fx_size + fixP->fx_where + fixP->fx_frag->fr_address;
+}
- /* Recognize special symbol names [0-9][bf]. */
- if (strlen (intel_parser.op_string) == 2
- && (intel_parser.op_string[1] == 'b'
- || intel_parser.op_string[1] == 'f'))
- new_token.code = T_ID;
- }
+#ifndef I386COFF
- else if ((reg = parse_register (intel_parser.op_string, &end_op)) != NULL)
- {
- size_t len = end_op - intel_parser.op_string;
+static void
+s_bss (int ignore ATTRIBUTE_UNUSED)
+{
+ int temp;
- new_token.code = T_REG;
- new_token.reg = reg;
+#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
+ if (IS_ELF)
+ obj_elf_section_change_hook ();
+#endif
+ temp = get_absolute_expression ();
+ subseg_set (bss_section, (subsegT) temp);
+ demand_empty_rest_of_line ();
+}
- memcpy (new_token.str, intel_parser.op_string, len);
- new_token.str[len] = '\0';
- }
+#endif
- else if (is_identifier_char (*intel_parser.op_string))
+void
+i386_validate_fix (fixS *fixp)
+{
+ if (fixp->fx_subsy && fixp->fx_subsy == GOT_symbol)
{
- char *p = new_token.str;
- char *q = intel_parser.op_string;
-
- /* A '.' or '$' followed by an identifier char is an identifier.
- Otherwise, it's operator '.' followed by an expression. */
- if ((*q == '.' || *q == '$') && !is_identifier_char (*(q + 1)))
+ if (fixp->fx_r_type == BFD_RELOC_32_PCREL)
{
- new_token.code = '.';
- new_token.str[0] = '.';
- new_token.str[1] = '\0';
+ if (!object_64bit)
+ abort ();
+ fixp->fx_r_type = BFD_RELOC_X86_64_GOTPCREL;
}
else
{
- while (is_identifier_char (*q) || *q == '@')
- *p++ = *q++;
- *p = '\0';
-
- if (strcasecmp (new_token.str, "NOT") == 0)
- new_token.code = '~';
-
- else if (strcasecmp (new_token.str, "MOD") == 0)
- new_token.code = '%';
-
- else if (strcasecmp (new_token.str, "AND") == 0)
- new_token.code = '&';
-
- else if (strcasecmp (new_token.str, "OR") == 0)
- new_token.code = '|';
-
- else if (strcasecmp (new_token.str, "XOR") == 0)
- new_token.code = '^';
-
- else if (strcasecmp (new_token.str, "SHL") == 0)
- new_token.code = T_SHL;
-
- else if (strcasecmp (new_token.str, "SHR") == 0)
- new_token.code = T_SHR;
-
- else if (strcasecmp (new_token.str, "BYTE") == 0)
- new_token.code = T_BYTE;
-
- else if (strcasecmp (new_token.str, "WORD") == 0)
- new_token.code = T_WORD;
-
- else if (strcasecmp (new_token.str, "DWORD") == 0)
- new_token.code = T_DWORD;
-
- else if (strcasecmp (new_token.str, "FWORD") == 0)
- new_token.code = T_FWORD;
-
- else if (strcasecmp (new_token.str, "QWORD") == 0)
- new_token.code = T_QWORD;
-
- else if (strcasecmp (new_token.str, "TBYTE") == 0
- /* XXX remove (gcc still uses it) */
- || strcasecmp (new_token.str, "XWORD") == 0)
- new_token.code = T_TBYTE;
-
- else if (strcasecmp (new_token.str, "XMMWORD") == 0
- || strcasecmp (new_token.str, "OWORD") == 0)
- new_token.code = T_XMMWORD;
-
- else if (strcasecmp (new_token.str, "PTR") == 0)
- new_token.code = T_PTR;
+ if (!object_64bit)
+ fixp->fx_r_type = BFD_RELOC_386_GOTOFF;
+ else
+ fixp->fx_r_type = BFD_RELOC_X86_64_GOTOFF64;
+ }
+ fixp->fx_subsy = 0;
+ }
+}
- else if (strcasecmp (new_token.str, "SHORT") == 0)
- new_token.code = T_SHORT;
+arelent *
+tc_gen_reloc (section, fixp)
+ asection *section ATTRIBUTE_UNUSED;
+ fixS *fixp;
+{
+ arelent *rel;
+ bfd_reloc_code_real_type code;
- else if (strcasecmp (new_token.str, "OFFSET") == 0)
+ switch (fixp->fx_r_type)
+ {
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
+ case BFD_RELOC_386_PLT32:
+ case BFD_RELOC_386_GOT32:
+ case BFD_RELOC_386_GOTOFF:
+ case BFD_RELOC_386_GOTPC:
+ case BFD_RELOC_386_TLS_GD:
+ case BFD_RELOC_386_TLS_LDM:
+ case BFD_RELOC_386_TLS_LDO_32:
+ case BFD_RELOC_386_TLS_IE_32:
+ case BFD_RELOC_386_TLS_IE:
+ case BFD_RELOC_386_TLS_GOTIE:
+ case BFD_RELOC_386_TLS_LE_32:
+ case BFD_RELOC_386_TLS_LE:
+ case BFD_RELOC_386_TLS_GOTDESC:
+ case BFD_RELOC_386_TLS_DESC_CALL:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_DTPOFF32:
+ case BFD_RELOC_X86_64_DTPOFF64:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_TPOFF32:
+ case BFD_RELOC_X86_64_TPOFF64:
+ case BFD_RELOC_X86_64_GOTOFF64:
+ case BFD_RELOC_X86_64_GOTPC32:
+ case BFD_RELOC_X86_64_GOT64:
+ case BFD_RELOC_X86_64_GOTPCREL64:
+ case BFD_RELOC_X86_64_GOTPC64:
+ case BFD_RELOC_X86_64_GOTPLT64:
+ case BFD_RELOC_X86_64_PLTOFF64:
+ case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
+ case BFD_RELOC_X86_64_TLSDESC_CALL:
+ case BFD_RELOC_RVA:
+ case BFD_RELOC_VTABLE_ENTRY:
+ case BFD_RELOC_VTABLE_INHERIT:
+#ifdef TE_PE
+ case BFD_RELOC_32_SECREL:
+#endif
+ code = fixp->fx_r_type;
+ break;
+ case BFD_RELOC_X86_64_32S:
+ if (!fixp->fx_pcrel)
+ {
+ /* Don't turn BFD_RELOC_X86_64_32S into BFD_RELOC_32. */
+ code = fixp->fx_r_type;
+ break;
+ }
+ default:
+ if (fixp->fx_pcrel)
+ {
+ switch (fixp->fx_size)
{
- new_token.code = T_OFFSET;
-
- /* ??? This is not mentioned in the MASM grammar but gcc
- makes use of it with -mintel-syntax. OFFSET may be
- followed by FLAT: */
- if (strncasecmp (q, " FLAT:", 6) == 0)
- strcat (new_token.str, " FLAT:");
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte pc-relative relocation"),
+ fixp->fx_size);
+ code = BFD_RELOC_32_PCREL;
+ break;
+ case 1: code = BFD_RELOC_8_PCREL; break;
+ case 2: code = BFD_RELOC_16_PCREL; break;
+ case 4: code = BFD_RELOC_32_PCREL; break;
+#ifdef BFD64
+ case 8: code = BFD_RELOC_64_PCREL; break;
+#endif
}
-
- /* ??? This is not mentioned in the MASM grammar. */
- else if (strcasecmp (new_token.str, "FLAT") == 0)
+ }
+ else
+ {
+ switch (fixp->fx_size)
{
- new_token.code = T_OFFSET;
- if (*q == ':')
- strcat (new_token.str, ":");
- else
- as_bad (_("`:' expected"));
+ default:
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("can not do %d byte relocation"),
+ fixp->fx_size);
+ code = BFD_RELOC_32;
+ break;
+ case 1: code = BFD_RELOC_8; break;
+ case 2: code = BFD_RELOC_16; break;
+ case 4: code = BFD_RELOC_32; break;
+#ifdef BFD64
+ case 8: code = BFD_RELOC_64; break;
+#endif
}
-
- else
- new_token.code = T_ID;
}
+ break;
}
- else if (strchr ("+-/*%|&^:[]()~", *intel_parser.op_string))
+ if ((code == BFD_RELOC_32
+ || code == BFD_RELOC_32_PCREL
+ || code == BFD_RELOC_X86_64_32S)
+ && GOT_symbol
+ && fixp->fx_addsy == GOT_symbol)
{
- new_token.code = *intel_parser.op_string;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = '\0';
+ if (!object_64bit)
+ code = BFD_RELOC_386_GOTPC;
+ else
+ code = BFD_RELOC_X86_64_GOTPC32;
}
-
- else if (strchr ("<>", *intel_parser.op_string)
- && *intel_parser.op_string == *(intel_parser.op_string + 1))
+ if ((code == BFD_RELOC_64 || code == BFD_RELOC_64_PCREL)
+ && GOT_symbol
+ && fixp->fx_addsy == GOT_symbol)
{
- new_token.code = *intel_parser.op_string == '<' ? T_SHL : T_SHR;
- new_token.str[0] = *intel_parser.op_string;
- new_token.str[1] = *intel_parser.op_string;
- new_token.str[2] = '\0';
+ code = BFD_RELOC_X86_64_GOTPC64;
}
- else
- as_bad (_("Unrecognized token `%s'"), intel_parser.op_string);
+ rel = (arelent *) xmalloc (sizeof (arelent));
+ rel->sym_ptr_ptr = (asymbol **) xmalloc (sizeof (asymbol *));
+ *rel->sym_ptr_ptr = symbol_get_bfdsym (fixp->fx_addsy);
- intel_parser.op_string += strlen (new_token.str);
- cur_token = new_token;
-}
+ rel->address = fixp->fx_frag->fr_address + fixp->fx_where;
-/* Put cur_token back into the token stream and make cur_token point to
- prev_token. */
-static void
-intel_putback_token (void)
-{
- if (cur_token.code != T_NIL)
+ if (!use_rela_relocations)
{
- intel_parser.op_string -= strlen (cur_token.str);
- free (cur_token.str);
+ /* HACK: Since i386 ELF uses Rel instead of Rela, encode the
+ vtable entry to be used in the relocation's section offset. */
+ if (fixp->fx_r_type == BFD_RELOC_VTABLE_ENTRY)
+ rel->address = fixp->fx_offset;
+#if defined (OBJ_COFF) && defined (TE_PE)
+ else if (fixp->fx_addsy && S_IS_WEAK (fixp->fx_addsy))
+ rel->addend = fixp->fx_addnumber - (S_GET_VALUE (fixp->fx_addsy) * 2);
+ else
+#endif
+ rel->addend = 0;
}
- cur_token = prev_token;
-
- /* Forget prev_token. */
- prev_token.code = T_NIL;
- prev_token.reg = NULL;
- prev_token.str = NULL;
-}
-
-int
-tc_x86_regname_to_dw2regnum (char *regname)
-{
- unsigned int regnum;
- unsigned int regnames_count;
- static const char *const regnames_32[] =
- {
- "eax", "ecx", "edx", "ebx",
- "esp", "ebp", "esi", "edi",
- "eip", "eflags", NULL,
- "st0", "st1", "st2", "st3",
- "st4", "st5", "st6", "st7",
- NULL, NULL,
- "xmm0", "xmm1", "xmm2", "xmm3",
- "xmm4", "xmm5", "xmm6", "xmm7",
- "mm0", "mm1", "mm2", "mm3",
- "mm4", "mm5", "mm6", "mm7",
- "fcw", "fsw", "mxcsr",
- "es", "cs", "ss", "ds", "fs", "gs", NULL, NULL,
- "tr", "ldtr"
- };
- static const char *const regnames_64[] =
- {
- "rax", "rdx", "rcx", "rbx",
- "rsi", "rdi", "rbp", "rsp",
- "r8", "r9", "r10", "r11",
- "r12", "r13", "r14", "r15",
- "rip",
- "xmm0", "xmm1", "xmm2", "xmm3",
- "xmm4", "xmm5", "xmm6", "xmm7",
- "xmm8", "xmm9", "xmm10", "xmm11",
- "xmm12", "xmm13", "xmm14", "xmm15",
- "st0", "st1", "st2", "st3",
- "st4", "st5", "st6", "st7",
- "mm0", "mm1", "mm2", "mm3",
- "mm4", "mm5", "mm6", "mm7",
- "rflags",
- "es", "cs", "ss", "ds", "fs", "gs", NULL, NULL,
- "fs.base", "gs.base", NULL, NULL,
- "tr", "ldtr",
- "mxcsr", "fcw", "fsw"
- };
- const char *const *regnames;
-
- if (flag_code == CODE_64BIT)
+ /* Use the rela in 64bit mode. */
+ else
{
- regnames = regnames_64;
- regnames_count = ARRAY_SIZE (regnames_64);
+ if (!fixp->fx_pcrel)
+ rel->addend = fixp->fx_offset;
+ else
+ switch (code)
+ {
+ case BFD_RELOC_X86_64_PLT32:
+ case BFD_RELOC_X86_64_GOT32:
+ case BFD_RELOC_X86_64_GOTPCREL:
+ case BFD_RELOC_X86_64_TLSGD:
+ case BFD_RELOC_X86_64_TLSLD:
+ case BFD_RELOC_X86_64_GOTTPOFF:
+ case BFD_RELOC_X86_64_GOTPC32_TLSDESC:
+ case BFD_RELOC_X86_64_TLSDESC_CALL:
+ rel->addend = fixp->fx_offset - fixp->fx_size;
+ break;
+ default:
+ rel->addend = (section->vma
+ - fixp->fx_size
+ + fixp->fx_addnumber
+ + md_pcrel_from (fixp));
+ break;
+ }
}
- else
+
+ rel->howto = bfd_reloc_type_lookup (stdoutput, code);
+ if (rel->howto == NULL)
{
- regnames = regnames_32;
- regnames_count = ARRAY_SIZE (regnames_32);
+ as_bad_where (fixp->fx_file, fixp->fx_line,
+ _("cannot represent relocation type %s"),
+ bfd_get_reloc_code_name (code));
+ /* Set howto to a garbage value so that we can keep going. */
+ rel->howto = bfd_reloc_type_lookup (stdoutput, BFD_RELOC_32);
+ gas_assert (rel->howto != NULL);
}
- for (regnum = 0; regnum < regnames_count; regnum++)
- if (regnames[regnum] != NULL
- && strcmp (regname, regnames[regnum]) == 0)
- return regnum;
+ return rel;
+}
+
+#include "tc-i386-intel.c"
- return -1;
+void
+tc_x86_parse_to_dw2regnum (expressionS *exp)
+{
+ int saved_naked_reg;
+ char saved_register_dot;
+
+ saved_naked_reg = allow_naked_reg;
+ allow_naked_reg = 1;
+ saved_register_dot = register_chars['.'];
+ register_chars['.'] = '.';
+ allow_pseudo_reg = 1;
+ expression_and_evaluate (exp);
+ allow_pseudo_reg = 0;
+ register_chars['.'] = saved_register_dot;
+ allow_naked_reg = saved_naked_reg;
+
+ if (exp->X_op == O_register && exp->X_add_number >= 0)
+ {
+ if ((addressT) exp->X_add_number < i386_regtab_size)
+ {
+ exp->X_op = O_constant;
+ exp->X_add_number = i386_regtab[exp->X_add_number]
+ .dw2_regnum[flag_code >> 1];
+ }
+ else
+ exp->X_op = O_illegal;
+ }
}
void
tc_x86_frame_initial_instructions (void)
{
- static unsigned int sp_regno;
+ static unsigned int sp_regno[2];
+
+ if (!sp_regno[flag_code >> 1])
+ {
+ char *saved_input = input_line_pointer;
+ char sp[][4] = {"esp", "rsp"};
+ expressionS exp;
- if (!sp_regno)
- sp_regno = tc_x86_regname_to_dw2regnum (flag_code == CODE_64BIT
- ? "rsp" : "esp");
+ input_line_pointer = sp[flag_code >> 1];
+ tc_x86_parse_to_dw2regnum (&exp);
+ gas_assert (exp.X_op == O_constant);
+ sp_regno[flag_code >> 1] = exp.X_add_number;
+ input_line_pointer = saved_input;
+ }
- cfi_add_CFA_def_cfa (sp_regno, -x86_cie_data_alignment);
+ cfi_add_CFA_def_cfa (sp_regno[flag_code >> 1], -x86_cie_data_alignment);
cfi_add_CFA_offset (x86_dwarf2_return_column, x86_cie_data_alignment);
}
return -1;
}
+#ifdef TE_SOLARIS
+void
+i386_solaris_fix_up_eh_frame (segT sec)
+{
+ if (flag_code == CODE_64BIT)
+ elf_section_type (sec) = SHT_X86_64_UNWIND;
+}
+#endif
+
#ifdef TE_PE
void
tc_pe_dwarf2_emit_offset (symbolS *symbol, unsigned int size)
#if defined (OBJ_ELF) || defined (OBJ_MAYBE_ELF)
/* For ELF on x86-64, add support for SHF_X86_64_LARGE. */
-int
+bfd_vma
x86_64_section_letter (int letter, char **ptr_msg)
{
if (flag_code == CODE_64BIT)
return -1;
}
-int
+bfd_vma
x86_64_section_word (char *str, size_t len)
{
if (len == 5 && flag_code == CODE_64BIT && CONST_STRNEQ (str, "large"))