/*
* File: main.c
*
- * Created on August 16, 2010, 12:09 PM
+ * PWM test program
+ *
+ * PIC resources in use, 28-pin DIP, by pin:
+ * - ( 1) RE3 - Vpp/MCLR#
+ * - ( 2) RA0 - unused
+ * - ( 3) RA1 - unused
+ * - ( 4) RA2 - unused
+ * - ( 5) RA3 - unused
+ * - ( 6) RA4 - unused (could become PGM/LVP, but apparently not needed)
+ * - ( 7) RA5 - unused
+ * - ( 8) Vss
+ * - ( 9) RA7 - unused
+ * - (10) RA6 - unused
+ * - (11) RC0 - T1OSO
+ * - (12) RC1 - T1OSI
+ * - (13) RC2 - CCP1 PWM for wht LED
+ * - (14) RC3 - unused
+ * - (15) RC4 - unused
+ * - (16) RC5 - unused
+ * - (17) RC6 - unused
+ * - (18) RC7 - unused
+ * - (19) Vss
+ * - (20) Vdd
+ * - (21) RB0 - CCP4 PWM for blu LED
+ * - (22) RB1 - Pushbutton
+ * - (23) RB2 - Rocker switch, right
+ * - (24) RB3 - CCP2 PWM for grn LED
+ * - (25) RB4 - Rocker switch, left
+ * - (26) RB5 - CCP3 PWM for red LED
+ * - (27) RB6 - ICSPCLK
+ * - (28) RB7 - ICSPDAT
*/
-#define RUNAT32MHZ /* else 16 MHz */
-
#include <htc.h>
#include <stdlib.h>
#include "picinit.h"
-#include "buttons.h"
+#include "unused.h"
+#include "btn.h"
#include "rgb.h"
+#include "tmr.h"
+#include "tmr32.h"
+#include "task.h"
+#include "adc_random.h"
-#define random_rgb() (rand() >> 7) /* 0...255 */
-#define random_time() (rand() >> 5) /* 0...1024 */
-#define min_incolor_time() 512
-#define min_fade_time() 512
+//#define AUTO_OFF_COUNT 150 /* 5 mins on*/
+//#define AUTO_ON_COUNT 300 /* 10 mins off */
+//#define AUTO_OFF_COUNT 450 /* 15 mins on*/
+//#define AUTO_ON_COUNT 1350 /* 45 mins off */
+//#define AUTO_OFF_COUNT 600 /* 20 mins on*/
+//#define AUTO_ON_COUNT 1200 /* 40 mins off */
+//#define AUTO_OFF_COUNT 450 /* 2 hours on*/
+//#define AUTO_ON_COUNT 1350 /* 22 hours off */
+#define AUTO_OFF_COUNT 9000U /* 5 hrs in 2 sec units */
+#define AUTO_ON_COUNT 34200U /* 19 hrs in 2 sec units */
+#define dbgpin_init() do { \
+ /* Set RA2 as output low */ \
+ RA2 = 0; \
+ TRISA2 = 0; \
+ } while (0)
+#define dbgpin_high() (RA2 = 1)
+#define dbgpin_low() (RA2 = 0)
+#define dbgpin_toggle() (RA2 = (LATA2 == 0) ? 1 : 0)
-int main(void)
+enum {
+ /* Operating modes */
+ MODE_SOLID = 0, /* Cycle through colors[][] before next mode */
+ //MODE_CANDLE,
+ MODE_CYCLE, /* Auto cycle through colors */
+ MODE_PARTY, /* Random yet fast incolor and fade */
+ MODE_COUNT,
+
+ /* Indexes in colors[][] for LEDs */
+ LED_RED = 0,
+ LED_GRN,
+ LED_BLU,
+ LED_WHT,
+ LED_COUNT,
+
+ HELD_TMR_PERIODS = 1, /* Held timer fires every 32.768 msec */
+ HELD_PERIODS = 16, /* Held this long before held events fire */
+ COLOR_WHITE = 0, /* Color index for white */
+ COLOR_COUNT = 11,
+ BRIGHT_TOP = 100, /* Bright ramps up to top ... */
+ BRIGHT_BOTTOM = -5, /* ... then down to bottom */
+ BRIGHT_MAX = 85, /* Bright values are constrained for computations */
+ BRIGHT_MIN = 1, /* ... by min and max. */
+ BRIGHT_INIT = 42, /* later, get from eeprom */
+ STD_FADE = 16, /* Fade time in 32.768 ms units */
+ STD_INCOLOR = 29491, /* Time in color when MODE_FADE, in 32.768 ms units */
+ PARTY_MIN = 8, /* Min party fade and incolor units */
+ PARTY_RANGE = 8, /* Party fade/incolor range mask for rand() */
+ /* ... see start_fade() */
+};
+
+typedef struct {
+ int value;
+ int increment;
+ signed char remainder;
+} led_t;
+
+/* Available colors, 6 bits per color (no values above 0x3f) */
+const unsigned char colors[COLOR_COUNT][LED_COUNT] = {
+ { 0x28, 0x00, 0x00, 0x00 }, /* red */
+ { 0x30, 0x20, 0x00, 0x00 }, /* orange */
+ { 0x2c, 0x2c, 0x00, 0x00 }, /* yellow */
+ { 0x20, 0x2c, 0x00, 0x00 }, /* yellow-green */
+ { 0x00, 0x30, 0x00, 0x00 }, /* green */
+ { 0x00, 0x30, 0x18, 0x00 }, /* green-cyan */
+ { 0x00, 0x30, 0x28, 0x00 }, /* cyan */
+ { 0x00, 0x18, 0x30, 0x00 }, /* cyan-blue */
+ { 0x00, 0x00, 0x30, 0x00 }, /* blue */
+ { 0x1c, 0x00, 0x30, 0x00 }, /* magenta */
+ { 0x3f, 0x3f, 0x3f, 0x3f }, /* white */
+};
+
+unsigned char mode = MODE_SOLID;
+unsigned char color = COLOR_WHITE;
+led_t red;
+led_t grn;
+led_t blu;
+led_t wht;
+bit on;
+int fade_steps;
+signed char bright = BRIGHT_INIT;
+bit bright_up;
+signed char pbHeldCount;
+
+/* Return the constrained brightness level for use in computing RGB values */
+unsigned char bright_get()
{
- unsigned char red = 0, grn = 0, blu = 0; //, wht = 0;
- char fadestep_red, fadestep_grn, fadestep_blu; //, fadestep_wht;
- unsigned char incolor_time = 0;
- unsigned char fade_time = 0;
- unsigned char fast = 0;
-
- pic_init();
- buttons_init();
- rgb_init();
- srand(27);
-
- if (buttons_on())
- rgb_on();
-
- while (1) {
- unsigned char buttons = buttons_read();
-
- if ((buttons & (IN_ROCKERA | IN_ROCKERB))) {
- if (buttons & IN_PUSHBTN) {
- if (!fast) {
- incolor_time = 0;
- fade_time = 0;
- fast = 1;
- } else
- fast = 0;
- }
-
- if (fade_time) {
- red += fadestep_red;
- grn += fadestep_grn;
- blu += fadestep_blu;
- //wht += fadestep_wht;
- rgb_set(red, grn, blu, 0); // wht);
- fade_time--;
- } else if (incolor_time)
- incolor_time--;
- else /* fade_time == 0 && incolor_time == 0 */ {
- unsigned char newr, newg, newb, neww;
-
- /* Determine next color state */
- newr = random_rgb();
- newg = random_rgb();
- newb = random_rgb();
- //neww = random_rgb();
-
- /* Calculate new incolor_time and fade_time */
- if (buttons & IN_ROCKERA) {
- incolor_time = 1 + random_time();
- fade_time = 1;
- } else /* (buttons & IN_ROCKERB) */ {
- incolor_time = min_incolor_time() + random_time() / 2;
- fade_time = min_fade_time() + random_time() / 2;
- }
-
- if (fast) {
- incolor_time = 1 + incolor_time / 8;
- fade_time = 1 + fade_time / 8;
- }
-
- fadestep_red = ((int)newr - red) / fade_time;
- fadestep_grn = ((int)newg - red) / fade_time;
- fadestep_blu = ((int)newb - red) / fade_time;
- //fadestep_wht = ((int)neww - red) / fade_time;
- }
- __delay_ms(10);
- } else {
- rgb_off();
- buttons_sleep();
- incolor_time = 0;
- fade_time = 0;
- rgb_on();
- }
+ if (bright > BRIGHT_MAX)
+ return BRIGHT_MAX;
+ else if (bright < BRIGHT_MIN)
+ return BRIGHT_MIN;
+ else
+ return bright;
+}
+
+/* RGB values will not illuminate the LED */
+unsigned char led_get(unsigned value)
+{
+ value = (value * bright_get()) >> 8;
+#ifdef CEIL256
+ if (value && value < 0x26)
+ return 0x26;
+#else
+ if (value && value < 4)
+ return 4;
+#endif
+ return value;
+}
+
+/* Set the LEDs using both color and brightness values. */
+void leds_set()
+{
+ rgb_set(led_get((red).value),
+ led_get((grn).value), led_get((blu).value),
+ led_get((wht).value));
+}
+
+void start_fade()
+{
+ /* RGB PWM values are 8 bits, but computations are done in 15
+ * (leaving room for a sign bit), so leds_set() uses >>7 to convert
+ * to PWM values.
+ */
+ int newr, newg, newb, neww;
+
+ /* Select the destination color and fade-to time depending upon mode. */
+ fade_steps = STD_FADE;
+ if (mode == MODE_PARTY) {
+ color = rand() % COLOR_COUNT;
+ fade_steps = PARTY_MIN + (rand() % PARTY_RANGE);
+ } else if (mode == MODE_CYCLE) {
+ if (++color == COLOR_COUNT)
+ color = 0;
+ }
+
+ /* Retrieve the destination color */
+ newr = colors[color][LED_RED] << 4;
+ newg = colors[color][LED_GRN] << 4;
+ newb = colors[color][LED_BLU] << 4;
+ neww = colors[color][LED_WHT] << 4;
+
+ /* Compute increment per fade step, and remainder, for each led */
+ red.increment = (newr - red.value) / fade_steps;
+ red.remainder = newr - (red.value + red.increment * fade_steps);
+ grn.increment = (newg - grn.value) / fade_steps;
+ grn.remainder = newg - (grn.value + grn.increment * fade_steps);
+ blu.increment = (newb - blu.value) / fade_steps;
+ blu.remainder = newb - (blu.value + blu.increment * fade_steps);
+ wht.increment = (neww - wht.value) / fade_steps;
+ wht.remainder = neww - (wht.value + wht.increment * fade_steps);
+
+ /* Start the fade timer */
+ tmr_stop(TMR_INCOLOR);
+ tmr_startPeriodic(TMR_FADE, 1); /* 32.768 msec */
+}
+
+void turnOn()
+{
+ dbgpin_high();
+ on = 1;
+ rgb_on();
+ start_fade();
+ btn_pben();
+}
+
+void turnOff()
+{
+ /* Event on to off, either by switch or auto-off timer */
+ tmr_stop(TMR_INCOLOR);
+ tmr_stop(TMR_FADE);
+ rgb_off();
+ red.value = grn.value = blu.value = wht.value = 0;
+ on = 0;
+ dbgpin_low();
+ SLEEP();
+}
+
+void pb_clicked()
+{
+ if (on) {
+ if (mode == MODE_SOLID) {
+ if (++color == COLOR_COUNT) {
+ color = 0;
+ if (++mode == MODE_COUNT)
+ mode = 0;
+ }
+ } else if (++mode == MODE_COUNT) {
+ mode = 0;
+ color = 0;
}
- return 0;
+ start_fade();
+ }
+}
+
+void pb_held()
+{
+ /* The button has been held. Change the color magnitude. */
+ if (bright_up) {
+ if (bright == BRIGHT_TOP)
+ bright_up = 0;
+ else
+ bright++;
+ } else {
+ if (bright == BRIGHT_BOTTOM)
+ bright_up = 1;
+ else
+ bright--;
+ }
+ leds_set();
+}
+
+void pb_held_task()
+{
+ pbHeldCount++;
+ if (pbHeldCount >= 0) {
+ pbHeldCount = 0;
+ pb_held();
+ }
}
+
+void pb_task()
+{
+ static unsigned char pbPrev = BTN_PB_UP;
+ unsigned char pb;
+
+ pb = btn_pb();
+ if (pbPrev == BTN_PB_UP) {
+ if (pb == BTN_PB_UP)
+ pb_clicked();
+ else /* (pb == BTN_PB_DOWN) */ {
+ tmr_startPeriodic(TMR_BTN_PB_HELD, HELD_TMR_PERIODS);
+ pbHeldCount = -HELD_PERIODS;
+ }
+ } else /* if (pbPrev == BTN_PB_DOWN) */ {
+ if (pb == BTN_PB_UP) {
+ tmr_stop(TMR_BTN_PB_HELD);
+ if (pbHeldCount < 0)
+ pb_clicked();
+ } /* nothing to do if button is down */
+ }
+ pbPrev = pb;
+ btn_pben();
+}
+
+void rs_task()
+{
+ btn_rsen();
+ switch (btn_rs()) {
+ case BTN_RS_OFF:
+ tmr32_set(0);
+ turnOff();
+ break;
+ case BTN_RS_RIGHT:
+ tmr32_set(AUTO_OFF_COUNT);
+ /* fall through */
+ case BTN_RS_LEFT:
+ turnOn();
+ break;
+ }
+}
+
+void fade_task()
+{
+ red.value += red.increment;
+ grn.value += grn.increment;
+ blu.value += blu.increment;
+ wht.value += wht.increment;
+ if (--fade_steps == 0) {
+ /* This is the last fade step. Finalize the RGB led states and decide how
+ * long to stay in this color.
+ */
+ red.value += red.remainder;
+ grn.value += grn.remainder;
+ blu.value += blu.remainder;
+ wht.value += wht.remainder;
+ tmr_stop(TMR_FADE);
+ if (mode == MODE_CYCLE)
+ tmr_start(TMR_INCOLOR, STD_INCOLOR);
+ else if (mode == MODE_PARTY)
+ tmr_start(TMR_INCOLOR, PARTY_MIN + (rand() % PARTY_RANGE));
+ }
+ leds_set();
+}
+
+void auto_offon_task()
+{
+ if (on) {
+ turnOff();
+ if (btn_rs() == BTN_RS_RIGHT)
+ tmr32_set(AUTO_ON_COUNT);
+ } else /* off */ {
+ turnOn();
+ if (btn_rs() == BTN_RS_RIGHT)
+ tmr32_set(AUTO_OFF_COUNT);
+ }
+}
+
+void config_read()
+{
+ /* Read configuration fields from eeprom, notably current mode and
+ * brightness level.
+ */
+ /* FIXME: implement this */
+}
+
+void user_boot()
+{
+ dbgpin_high();
+ srand((adc_random() << 8) + adc_random());
+ config_read();
+ rs_task();
+}
+
+void user_tasks(unsigned char block)
+{
+ task_id_t tid;
+
+ while ((tid = task_get(block)) >= 0) {
+ switch (tid) {
+ case TASK_BTN_PB: /* pushbutton state change */
+ pb_task();
+ break;
+ case TASK_BTN_RS: /* rocker switch state change */
+ rs_task();
+ break;
+ case TASK_BTN_PB_HELD: /* pushbutton is being held down */
+ pb_held_task();
+ break;
+ case TASK_FADE: /* fade timer has fired */
+ fade_task();
+ break;
+ case TASK_INCOLOR: /* in-color timer has fired */
+ start_fade();
+ break;
+ case TASK_TMR32: /* auto on/off event */
+ auto_offon_task();
+ break;
+ }
+ }
+}
+
+int main(void)
+{
+ /* Platform initialization */
+ pic_init();
+ unused_init();
+ btn_init();
+ rgb_init();
+ tmr_init();
+ tmr32_init();
+ task_init();
+ dbgpin_init();
+
+#if 0
+ /* Execute tasks until the queue empties */
+ user_tasks(0);
+#endif
+
+#if 0
+ /* Software initialization */
+#endif
+
+#if 0
+ /* Execute tasks until the queue empties */
+ user_tasks(0);
+#endif
+
+ /* Run user boot code */
+ user_boot();
+
+ /* Process tasks forever */
+ user_tasks(1);
+
+ /* Prevent return from main, which causes a device reset */
+ while (1);
+}
+
projects / rgblamp.git / blobdiff