#include <linux/usb.h>
#include <linux/uaccess.h>
#include <linux/usb/serial.h>
+#include "cp210x.h"
/*
* Version Information
.disconnect = cp210x_disconnect,
};
-/* Config request types */
-#define REQTYPE_HOST_TO_DEVICE 0x41
-#define REQTYPE_DEVICE_TO_HOST 0xc1
-
/* Config request codes */
#define CP210X_IFC_ENABLE 0x00
#define CP210X_SET_BAUDDIV 0x01
#define CONTROL_WRITE_DTR 0x0100
#define CONTROL_WRITE_RTS 0x0200
-/* CP2103 ioctls */
-#define IOCTL_GPIOGET 0x8000 /* Get gpio bits */
-#define IOCTL_GPIOSET 0x8001 /* Set gpio bits */
-#define IOCTL_GPIOBIC 0x8002 /* Clear specific gpio bit(s) */
-#define IOCTL_GPIOBIS 0x8003 /* Set specific gpio bit(s) */
-
-/* CP210x ioctls principally used during initial device configuration */
-#define IOCTL_DEVICERESET 0x8004 /* Reset the cp210x */
-#define IOCTL_PORTCONFGET 0x8005 /* Get port configuration */
-#define IOCTL_PORTCONFSET 0x8006 /* Set port configuration */
-#define IOCTL_SETVID 0x8007 /* Set vendor id */
-#define IOCTL_SETPID 0x8008 /* Set product id */
-#define IOCTL_SETMFG 0x8009 /* Set manufacturer string */
-#define IOCTL_SETPRODUCT 0x800a /* Set product string */
-#define IOCTL_SETSERIAL 0x800b /* Set serial number string */
-#define IOCTL_SETDEVVER 0x800c /* set device version id */
-/* FIXME: where is IOCTL_SETMFG? */
-
-/* CP2103 GPIO */
-#define GPIO_0 0x01
-#define GPIO_1 0x02
-#define GPIO_2 0x04
-#define GPIO_3 0x08
-#define GPIO_MASK (GPIO_0|GPIO_1|GPIO_2|GPIO_3)
-
-/* GetDeviceVersion() return codes */
-#define CP210x_CP2101_VERSION 0x01
-#define CP210x_CP2102_VERSION 0x02
-#define CP210x_CP2103_VERSION 0x03
-
-/* Return codes */
-#define CP210x_SUCCESS 0x00
-#define CP210x_DEVICE_NOT_FOUND 0xFF
-#define CP210x_INVALID_HANDLE 0x01
-#define CP210x_INVALID_PARAMETER 0x02
-#define CP210x_DEVICE_IO_FAILED 0x03
-#define CP210x_FUNCTION_NOT_SUPPORTED 0x04
-#define CP210x_GLOBAL_DATA_ERROR 0x05
-#define CP210x_FILE_ERROR 0x06
-#define CP210x_COMMAND_FAILED 0x08
-#define CP210x_INVALID_ACCESS_TYPE 0x09
-
-/* USB descriptor sizes */
-#define CP210x_MAX_DEVICE_STRLEN 256
-#define CP210x_MAX_PRODUCT_STRLEN 126
-#define CP210x_MAX_SERIAL_STRLEN 63
-#define CP210x_MAX_MAXPOWER 250
-
-/* Used to pass variable sized buffers between user and kernel space (ioctls) */
-typedef struct {
- char *buf;
- size_t len;
-} cp210x_buffer_t;
-
-/* Port config definitions */
-typedef struct {
- uint16_t mode; /* Push-pull = 1, Open-drain = 0 */
- uint16_t lowPower;
- uint16_t latch; /* Logic high = 1, Logic low = 0 */
-} cp210x_port_state_t;
-
-typedef struct {
- cp210x_port_state_t reset;
- cp210x_port_state_t suspend;
- uint8_t enhancedFxn;
-} cp210x_port_config_t;
-
-#define PORT_CONFIG_LEN 13 /* Because sizeof() will pad to full words */
+/* cp210x_get_partnum() return codes */
+#define CP210x_PART_UNKNOWN 0x00
+#define CP210x_PART_CP2101 0x01
+#define CP210x_PART_CP2102 0x02
+#define CP210x_PART_CP2103 0x03
+
+/* Return the size of the buffer needed to hold a string of len x formatted
+ * for send to CP210X, and its reverse.
+ */
+#define USBSTRLEN(strlen) (strlen * 2 + 2)
+
+
+/* Populates usbstr with: (len) + (0x03) + unicode(str). Each char in str
+ * takes two bytes in unicode format.
+ * Returns the resulting length of the string in usbstr.
+ * This function can accept overlapping usbstr and str as long as the overlap
+ * does not cause data written to usbstr to overwrite data not yet read from
+ * str.
+ */
+static int make_usb_string(char *usbstr, size_t usblen, char *src,
+ size_t srclen)
+{
+ int len = 0;
+
+ if (usbstr && usblen >= 2 && src && *src && srclen) {
+ char *p;
+
+ if (usblen > 255)
+ usblen = 255;
+
+ p = usbstr + 1;
+ *p++ = 0x03;
+ len = 2;
+ while (srclen && len < usblen) {
+ *p++ = *src++;
+ *p++ = 0;
+ len += 2;
+ srclen--;
+ }
+ *usbstr = (char)len;
+ }
+ return len;
+}
/*
- * cp210x_buf_from_user
- * Copy a buffer from user space, returning the number of bytes copied
- * from ubuf.buf into kbuf. klen is the size of the buffer at kbuf.
+ * cp210x_usbstr_from_user
+ * Populate kbuf with a usb string derived from a user space variable. klen
+ * is the size of the buffer at kbuf.
+ * Returns the number of bytes used in kbuf.
*/
-static size_t copy_buf_from_user(char *kbuf, unsigned long ubuf, size_t klen)
+static size_t cp210x_usbstr_from_user(char *kbuf,
+ struct cp210x_buffer __user *ubuf, size_t klen)
{
- cp210x_buffer_t t;
+ struct cp210x_buffer t;
+ char *str;
+ size_t slen;
- if (!kbuf || !ubuf || !klen ||
- copy_from_user(&t, (cp210x_buffer_t *)ubuf, sizeof(t)))
+ if (copy_from_user(&t, ubuf, sizeof(t)))
+ return 0;
+ slen = (klen - 2) / 2;
+ if (!t.buf || !t.len || t.len > slen)
return 0;
- if (t.len < klen)
- klen = t.len;
- if (!t.buf || !t.len || copy_from_user(kbuf, t.buf, klen))
+ if (t.len < slen)
+ slen = t.len;
+ str = kbuf + klen - slen;
+ if (copy_from_user(str, (__u8 __user *)t.buf, slen))
return 0;
- return klen;
+ return make_usb_string(kbuf, klen, str, slen);
}
+
/*
* cp210x_ctlmsg
* A generic usb control message interface.
u8 *tbuf;
int ret;
- if (!(tbuf = kmalloc(size, GFP_KERNEL)))
+ tbuf = kmalloc(size, GFP_KERNEL);
+ if (!tbuf)
return -ENOMEM;
- if (requestype & 0x80) {
+ if (requestype & USB_DIR_IN) {
ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
requestype, value, index, tbuf, size, 300);
if (ret > 0 && size)
}
kfree(tbuf);
if (ret < 0 && ret != -EPIPE) {
- dev_printk(KERN_DEBUG, &dev->dev, "cp210x: control failed cmd rqt %u "
- "rq %u len %u ret %d\n", requestype, request, size, ret);
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "cp210x: ctl failed cmd rqt %u rq %u len %u ret %d\n",
+ requestype, request, size, ret);
}
return ret;
}
static int cp210x_reset(struct usb_serial_port *port)
{
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
-#if 1
- /* Is this better than usb_device_reset? It may be. Once a client issues
- * the reset ioctl, it must disconnect and reconnect, since the USB
- * connections are torn down. We also ignore the error return, since
- * the part resets and doesn't send one...
+ /* Instructing the CP210X to reset seems to work more reliably than
+ * calling usb_reset_device().
*/
- cp210x_ctlmsg(port, 0xff, 0x40, 0x0008, 0x00, 0, 0);
-#else
- usb_reset_device(port->serial->dev);
-#endif
+ cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x0008, 0x00, NULL, 0);
return 0;
}
static int cp210x_get_partnum(struct usb_serial_port *port)
{
- static u8 _partnum = 0;
- int ret = CP210x_SUCCESS;
- if (!_partnum) {
+ static u8 _partnum = CP210x_PART_UNKNOWN;
+
+ if (_partnum == CP210x_PART_UNKNOWN) {
u8 addr = port->serial->dev->actconfig->interface[0]->
cur_altsetting->endpoint[0].desc.bEndpointAddress &
USB_ENDPOINT_NUMBER_MASK;
- if (addr == 0x03 || addr == 0x02) /* The part is a cp2101 */
- _partnum = 0x01;
+ if (addr == 0x03 || addr == 0x02)
+ _partnum = CP210x_PART_CP2101;
else if (addr == 0x01) {
/* Must query part to determine part number */
- if (cp210x_ctlmsg(port, 0xff, 0xc0, 0x370b, 0x00,
- &_partnum, 1) != 1)
- ret = CP210x_DEVICE_IO_FAILED;
- } else
- ret = CP210x_DEVICE_IO_FAILED;
+ if (cp210x_ctlmsg(port, 0xff,
+ USB_DIR_IN|USB_TYPE_VENDOR,
+ 0x370b, 0x00, &_partnum, 1) != 1)
+ _partnum = CP210x_PART_UNKNOWN;
+ }
}
- dbg("%s - partnum %u err %d", __FUNCTION__, _partnum, ret);
- return (ret == CP210x_SUCCESS) ? _partnum : 0;
+ dbg("%s - partnum %u", __func__, _partnum);
+ return _partnum;
}
static inline int cp210x_setu16(struct usb_serial_port *port, int cmd,
unsigned int value)
{
- return cp210x_ctlmsg(port, 0xff, 0x40, 0x3700 | (cmd & 0xff),
- value, 0, 0);
-}
-
-/* Populates usbstr with: (len) + (0x03) + unicode(str). Each char in str
- * takes up two bytes in unicode format, so the resulting len(usbstr) is
- * 2 * len(str) + 2.
- * Returns the resulting length of the string in usbstr.
- * This function can accept overlapping usbstr and str as long as the overlap
- * does not cause data written to usbstr to overwrite data not yet read from
- * str.
- */
-static int make_usb_string(char *usbstr, size_t usblen, char *src,
- size_t srclen)
-{
- int len = 0;
-
- if (usbstr && usblen >= 2 && src && *src && srclen) {
- char *p;
-
- /* The usb string format uses first byte as length */
- if (usblen > 256)
- usblen = 256;
-
- p = usbstr + 1;
- *p++ = 0x03;
- len = 2;
- while (srclen && len < usblen) {
- *p++ = *src++;
- *p++ = 0;
- len += 2;
- srclen--;
- }
- *usbstr = (char)len;
- }
- return len;
+ return cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x3700 | (cmd & 0xff), value, NULL, 0);
}
/*
static int cp210x_setstr(struct usb_serial_port *port, int cmd, char *usbstr)
{
unsigned len = usbstr[0];
- int ret = cp210x_ctlmsg(port, 0xff, 0x40, 0x3700 | (cmd & 0xff), 0,
- usbstr, len);
- dbg("%s - cmd 0x%02x len %d ret %d", __FUNCTION__, cmd, len, ret);
+ int ret = cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x3700 | (cmd & 0xff), 0, usbstr, len);
+ dbg("%s - cmd 0x%02x len %d ret %d", __func__, cmd, len, ret);
return ret;
}
/* Set all gpio simultaneously */
static int cp210x_gpioset(struct usb_serial_port *port, u8 gpio)
{
- dbg("%s - port %d, gpio = 0x%.2x", __FUNCTION__, port->number, gpio);
+ dbg("%s - port %d, gpio = 0x%.2x", __func__, port->number, gpio);
- return cp210x_ctlmsg(port, 0xff, 0x40, 0x37e1,
- ((uint16_t)gpio << 8) | GPIO_MASK, 0, 0);
+ return cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x37e1, ((uint16_t)gpio << 8) | GPIO_MASK, NULL, 0);
}
/* Set select gpio bits */
if (clear & GPIO_3)
gpio = (gpio & ~(GPIO_3 << 8))|GPIO_3;
- dbg("%s - port %d, gpiob = 0x%.4x", __FUNCTION__, port->number, gpio);
+ dbg("%s - port %d, gpiob = 0x%.4x", __func__, port->number, gpio);
- /* FIXME: how about REQTYPE_HOST_TO_DEVICE instead of 0x40? */
- return cp210x_ctlmsg(port, 0xff, 0x40, 0x37e1, gpio, 0, 0);
+ return cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x37e1, gpio, NULL, 0);
}
static int cp210x_gpioget(struct usb_serial_port *port, u8 *gpio)
{
int ret;
- dbg("%s - port %d", __FUNCTION__, port->number);
+ dbg("%s - port %d", __func__, port->number);
- /* FIXME: how about REQTYPE_DEVICE_TO_HOST instead of 0xc0? */
- ret = cp210x_ctlmsg(port, 0xff, 0xc0, 0x00c2, 0, gpio, 1);
+ ret = cp210x_ctlmsg(port, 0xff, USB_DIR_IN|USB_TYPE_VENDOR,
+ 0x00c2, 0, gpio, 1);
- dbg("%s - gpio = 0x%.2x (%d)", __FUNCTION__, *gpio, ret);
+ dbg("%s - gpio = 0x%.2x (%d)", __func__, *gpio, ret);
return (ret == 1) ? 0 : -1;
}
static int cp210x_portconfset(struct usb_serial_port *port,
- cp210x_port_config_t *config)
+ struct cp210x_port_config *config)
{
- cp210x_port_config_t lconfig;
+ struct cp210x_port_config lconfig;
int ret;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
memcpy(&lconfig, config, sizeof(lconfig));
- /* apparently not implemented yet */
- lconfig.suspend.lowPower = 0;
- lconfig.reset.lowPower = 0;
-
- /* Words from cp2103 are MSB */
+ /* Words from cp210x are MSB */
lconfig.reset.mode = cpu_to_be16(config->reset.mode);
- /* lconfig.reset.lowPower = cpu_to_be16(config->reset.lowPower); */
lconfig.reset.latch = cpu_to_be16(config->reset.latch);
lconfig.suspend.mode = cpu_to_be16(config->suspend.mode);
- /* lconfig.suspend.lowPower = cpu_to_be16(config->suspend.lowPower); */
lconfig.suspend.latch = cpu_to_be16(config->suspend.latch);
+ /* apparently not implemented by CP210X firmware */
+ lconfig.suspend.lowPower = 0;
+ lconfig.reset.lowPower = 0;
- ret = cp210x_ctlmsg(port, 0xff, 0x40, 0x370c, 0, &lconfig,
- PORT_CONFIG_LEN);
- if (ret == PORT_CONFIG_LEN)
+ ret = cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR, 0x370c,
+ 0, &lconfig, sizeof(struct cp210x_port_config));
+ if (ret == sizeof(struct cp210x_port_config))
return 0;
else if (ret >= 0)
return -1;
}
static int cp210x_portconfget(struct usb_serial_port *port,
- cp210x_port_config_t *config)
+ struct cp210x_port_config *config)
{
int ret;
- dbg("%s", __FUNCTION__);
+ dbg("%s", __func__);
- ret = cp210x_ctlmsg(port, 0xff, 0xc0, 0x370c, 0, config,
- PORT_CONFIG_LEN);
- if (ret == PORT_CONFIG_LEN) {
- /* Words from cp2103 are MSB */
+ ret = cp210x_ctlmsg(port, 0xff, USB_DIR_IN|USB_TYPE_VENDOR,
+ 0x370c, 0, config, sizeof(struct cp210x_port_config));
+ if (ret == sizeof(struct cp210x_port_config)) {
+ /* Words from cp210x are MSB */
config->reset.mode = be16_to_cpu(config->reset.mode);
config->reset.lowPower = be16_to_cpu(config->reset.lowPower);
config->reset.latch = be16_to_cpu(config->reset.latch);
/* Issue the request, attempting to read 'size' bytes */
result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
- request, REQTYPE_DEVICE_TO_HOST, 0x0000,
- 0, buf, size, 300);
+ request,
+ USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+ 0x0000, 0, buf, size, 300);
/* Convert data into an array of integers */
for (i = 0; i < length; i++)
if (size > 2) {
result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_DEVICE, 0x0000,
+ usb_sndctrlpipe(serial->dev, 0), request,
+ USB_TYPE_VENDOR|USB_RECIP_INTERFACE, 0x0000,
0, buf, size, 300);
} else {
result = usb_control_msg(serial->dev,
- usb_sndctrlpipe(serial->dev, 0),
- request, REQTYPE_HOST_TO_DEVICE, data[0],
+ usb_sndctrlpipe(serial->dev, 0), request,
+ USB_TYPE_VENDOR|USB_RECIP_INTERFACE, data[0],
0, NULL, 0, 300);
}
{
struct usb_serial_port *port = tty->driver_data;
- dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
+ dbg("%s (%d) cmd = 0x%04x", __func__, port->number, cmd);
switch (cmd) {
case TIOCMGET:
{
int result = cp210x_tiocmget(tty, file);
- if (copy_to_user(&arg, &result, sizeof(int)))
+ if (copy_to_user((int __user *)&arg, &result, sizeof(int)))
return -EFAULT;
return 0;
}
case TIOCMSET:
case TIOCMBIS:
-
case TIOCMBIC:
{
int val = 0;
- if (copy_from_user(&val, &arg, sizeof(int)))
+ if (copy_from_user(&val, (int __user *)&arg, sizeof(int)))
return -EFAULT;
/* this looks wrong: TIOCMSET isn't going to work right */
- if (cp210x_tiocmset(tty, file, cmd==TIOCMBIC ? 0 : val,
- cmd==TIOCMBIC ? val : 0))
+ if (cp210x_tiocmset(tty, file, (cmd == TIOCMBIC) ? 0 : val,
+ (cmd == TIOCMBIC) ? val : 0))
return -EFAULT;
return 0;
}
break;
- case IOCTL_GPIOGET:
- if (cp210x_get_partnum(port) == CP210x_CP2103_VERSION) {
+ case CP210x_IOCTL_GPIOGET:
+ if (cp210x_get_partnum(port) == CP210x_PART_CP2103) {
u8 gpio = 0;
- if (!cp210x_gpioget(port, &gpio) && !copy_to_user((u8*)arg,
- &gpio, sizeof(gpio)))
+ if (!cp210x_gpioget(port, &gpio) && !copy_to_user(
+ (u8 __user *)arg, &gpio, sizeof(gpio)))
return 0;
}
return -EFAULT;
break;
- case IOCTL_GPIOSET:
- if (cp210x_get_partnum(port) == CP210x_CP2103_VERSION &&
+ case CP210x_IOCTL_GPIOSET:
+ if (cp210x_get_partnum(port) == CP210x_PART_CP2103 &&
!cp210x_gpioset(port, arg))
return 0;
return -EFAULT;
break;
- case IOCTL_GPIOBIC:
- case IOCTL_GPIOBIS:
- if (cp210x_get_partnum(port) == CP210x_CP2103_VERSION &&
- !cp210x_gpiosetb(port, (cmd==IOCTL_GPIOBIC) ? 0 : arg,
- (cmd==IOCTL_GPIOBIC) ? arg : 0))
+ case CP210x_IOCTL_GPIOBIC:
+ case CP210x_IOCTL_GPIOBIS:
+ if (cp210x_get_partnum(port) == CP210x_PART_CP2103 &&
+ !cp210x_gpiosetb(port,
+ (cmd == CP210x_IOCTL_GPIOBIC) ? 0 : arg,
+ (cmd == CP210x_IOCTL_GPIOBIC) ? arg : 0))
return 0;
return -EFAULT;
break;
- case IOCTL_DEVICERESET:
+ case CP210x_IOCTL_DEVICERESET:
return cp210x_reset(port);
break;
- case IOCTL_PORTCONFGET:
+ case CP210x_IOCTL_PORTCONFGET:
{
- cp210x_port_config_t config;
+ struct cp210x_port_config config;
if (!cp210x_portconfget(port, &config) && !copy_to_user(
- (cp210x_port_config_t*)arg, &config,
- sizeof(config)))
+ (struct cp210x_port_config __user *)arg,
+ &config, sizeof(config)))
return 0;
}
return -EFAULT;
break;
- case IOCTL_PORTCONFSET:
+ case CP210x_IOCTL_PORTCONFSET:
{
- cp210x_port_config_t config;
- if (!copy_from_user(&config, (cp210x_port_config_t*)arg,
+ struct cp210x_port_config config;
+ if (!copy_from_user(&config, (struct cp210x_port_config __user *)arg,
sizeof(config)) &&
!cp210x_portconfset(port, &config))
return 0;
}
break;
- case IOCTL_SETVID:
+ case CP210x_IOCTL_SETVID:
{
unsigned int vid;
- if (!copy_from_user(&vid, (unsigned int *)arg,
+ if (!copy_from_user(&vid, (unsigned int __user *)arg,
sizeof(unsigned int)) &&
!cp210x_setu16(port, 0x01, vid))
return 0;
}
break;
- case IOCTL_SETPID:
+ case CP210x_IOCTL_SETPID:
{
unsigned int pid;
- if (!copy_from_user(&pid, (unsigned int *)arg,
+ if (!copy_from_user(&pid, (unsigned int __user *)arg,
sizeof(unsigned int)) &&
!cp210x_setu16(port, 0x02, pid))
return 0;
}
break;
- case IOCTL_SETMFG:
-#if 0 /* Silicon Labs apparently doesn't provide for setting of mfg desc */
- {
- char usbstr[CP210x_MAX_MFG_STRLEN * 2 + 2];
- size_t len = copy_buf_from_user(usbstr + sizeof(usbstr) -
- CP210x_MAX_MFG_STRLEN, arg,
- CP210x_MAX_MFG_STRLEN);
- len = make_usb_string(usbstr, sizeof(usbstr), str, len);
- if (len && cp210x_setstr(port, 0x00, usbstr) == len)
- return 0;
- return -EFAULT;
- }
-#endif
- break;
-
- case IOCTL_SETPRODUCT:
+ case CP210x_IOCTL_SETPRODUCT:
{
- char usbstr[CP210x_MAX_PRODUCT_STRLEN * 2 + 2];
- char *str = usbstr + sizeof(usbstr) - CP210x_MAX_PRODUCT_STRLEN;
- size_t len = copy_buf_from_user(str, arg,
- CP210x_MAX_PRODUCT_STRLEN);
- len = make_usb_string(usbstr, sizeof(usbstr), str, len);
+ char usbstr[USBSTRLEN(CP210x_MAX_PRODUCT_STRLEN)];
+ size_t len = cp210x_usbstr_from_user(usbstr,
+ (struct cp210x_buffer __user *)arg,
+ sizeof(usbstr));
if (len && cp210x_setstr(port, 0x03, usbstr) == len)
return 0;
return -EFAULT;
}
break;
- case IOCTL_SETSERIAL:
+ case CP210x_IOCTL_SETSERIAL:
{
- char usbstr[CP210x_MAX_SERIAL_STRLEN * 2 + 2];
- char *str = usbstr + sizeof(usbstr) - CP210x_MAX_SERIAL_STRLEN;
- size_t len = copy_buf_from_user(str, arg,
- CP210x_MAX_SERIAL_STRLEN);
- len = make_usb_string(usbstr, sizeof(usbstr), str, len);
+ char usbstr[USBSTRLEN(CP210x_MAX_SERIAL_STRLEN)];
+ size_t len = cp210x_usbstr_from_user(usbstr,
+ (struct cp210x_buffer __user *)arg,
+ sizeof(usbstr));
if (len && cp210x_setstr(port, 0x04, usbstr) == len)
return 0;
return -EFAULT;
}
break;
- case IOCTL_SETDEVVER:
+ case CP210x_IOCTL_SETDEVVER:
{
unsigned int ver;
- if (!copy_from_user(&ver, (unsigned int *)arg,
+ if (!copy_from_user(&ver, (unsigned int __user *)arg,
sizeof(unsigned int)) &&
!cp210x_setu16(port, 0x07, ver))
return 0;
break;
default:
- dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
+ dbg("%s not supported = 0x%04x", __func__, cmd);
break;
}
projects / cp210x.git / blobdiff