#include <HplRF230.h>
#include <Tasklet.h>
#include <RadioAssert.h>
+#include <TimeSyncMessage.h>
module RF230LayerP
{
enum
{
- SLEEP_WAKEUP_TIME = (uint16_t)(880 * RF230_ALARM_MICROSEC),
- CCA_REQUEST_TIME = (uint16_t)(140 * RF230_ALARM_MICROSEC),
+ SLEEP_WAKEUP_TIME = (uint16_t)(880 * RF230_ALARM_SEC / 1000000UL),
+ CCA_REQUEST_TIME = (uint16_t)(140 * RF230_ALARM_SEC / 1000000UL),
- TX_SFD_DELAY = (uint16_t)(176 * RF230_ALARM_MICROSEC),
- RX_SFD_DELAY = (uint16_t)(8 * RF230_ALARM_MICROSEC),
+ TX_SFD_DELAY = (uint16_t)(176 * RF230_ALARM_SEC / 1000000UL),
+ RX_SFD_DELAY = (uint16_t)(8 * RF230_ALARM_SEC / 1000000UL),
};
tasklet_async event void RadioAlarm.fired()
uint8_t* data;
uint8_t header;
uint32_t time32;
+ void* timesync;
if( cmd != CMD_NONE || state != STATE_RX_ON || ! isSpiAcquired() || radioIrq )
return EBUSY;
- if( call RF230Config.requiresRssiCca(msg)
- && (readRegister(RF230_PHY_RSSI) & RF230_RSSI_MASK) > ((rssiClear + rssiBusy) >> 3) )
- return EBUSY;
-
- writeRegister(RF230_TRX_STATE, RF230_PLL_ON);
-
- // do something useful, just to wait a little
length = (call PacketTransmitPower.isSet(msg) ?
call PacketTransmitPower.get(msg) : RF230_DEF_RFPOWER) & RF230_TX_PWR_MASK;
writeRegister(RF230_PHY_TX_PWR, RF230_TX_AUTO_CRC_ON | txPower);
}
+ if( call RF230Config.requiresRssiCca(msg)
+ && (readRegister(RF230_PHY_RSSI) & RF230_RSSI_MASK) > ((rssiClear + rssiBusy) >> 3) )
+ return EBUSY;
+
+ writeRegister(RF230_TRX_STATE, RF230_PLL_ON);
+
+ // do something useful, just to wait a little
time32 = call LocalTime.get();
+ timesync = call PacketTimeSyncOffset.isSet(msg) ? msg->data + call PacketTimeSyncOffset.get(msg) : 0;
// we have missed an incoming message in this short amount of time
if( (readRegister(RF230_TRX_STATUS) & RF230_TRX_STATUS_MASK) != RF230_PLL_ON )
time32 += (int16_t)(time) - (int16_t)(time32);
- if( call PacketTimeSyncOffset.isSet(msg) )
- ((timesync_footer_t*)(msg->data + call PacketTimeSyncOffset.get(msg)))->time_offset += time32;
+ if( timesync != 0 )
+ *(timesync_relative_t*)timesync = (*(timesync_absolute_t*)timesync) - time32;
do {
call HplRF230.spiSplitReadWrite(*(data++));
}
#endif
- if( call PacketTimeSyncOffset.isSet(msg) )
- ((timesync_footer_t*)(msg->data + call PacketTimeSyncOffset.get(msg)))->time_offset -= time32;
+ if( timesync != 0 )
+ *(timesync_absolute_t*)timesync = (*(timesync_relative_t*)timesync) + time32;
call PacketTimeStamp.set(msg, time32);
length = call RF230Config.getLength(rxMsg);
call DiagMsg.str("rx");
- call DiagMsg.uint32(call PacketTimeStamp.isSet(rxMsg) ? call PacketTimeStamp.get(rxMsg) : 0);
+ call DiagMsg.uint32(call PacketTimeStamp.isValid(rxMsg) ? call PacketTimeStamp.timestamp(rxMsg) : 0);
call DiagMsg.uint16(call RadioAlarm.getNow());
call DiagMsg.uint8(crc != 0);
call DiagMsg.uint8(length);
if( irq == RF230_IRQ_RX_START )
{
temp = readRegister(RF230_PHY_RSSI) & RF230_RSSI_MASK;
-
rssiBusy += temp - (rssiBusy >> 2);
-
-#ifdef RF230_RSSI_ENERGY
- temp = readRegister(RF230_PHY_ED_LEVEL);
-#endif
-
+#ifndef RF230_RSSI_ENERGY
call PacketRSSI.set(rxMsg, temp);
}
else
+ {
call PacketRSSI.clear(rxMsg);
+#endif
+ }
/*
* The timestamp corresponds to the first event which could not
else if( cmd == CMD_RECEIVE )
{
ASSERT( state == STATE_RX_ON || state == STATE_PLL_ON_2_RX_ON );
-
+#ifdef RF230_RSSI_ENERGY
+ if( irq == RF230_IRQ_TRX_END )
+ call PacketRSSI.set(rxMsg, readRegister(RF230_PHY_ED_LEVEL));
+ else
+ call PacketRSSI.clear(rxMsg);
+#endif
if( state == STATE_PLL_ON_2_RX_ON )
{
ASSERT( (readRegister(RF230_TRX_STATUS) & RF230_TRX_STATUS_MASK) == RF230_PLL_ON );