Merge devel code into the trunk.

[tinyos-2.x.git] / tos / sensorboards / im2sb / Tsl2561InternalP.nc

diff --git a/tos/sensorboards/im2sb/Tsl2561InternalP.nc b/tos/sensorboards/im2sb/Tsl2561InternalP.nc
new file mode 100644 (file)
index 0000000..0f6df7e
--- /dev/null
+++ b/tos/sensorboards/im2sb/Tsl2561InternalP.nc
@@ -0,0 +1,114 @@
+/* $Id$ */
+/*
+ * Copyright (c) 2005 Arch Rock Corporation 
+ * All rights reserved. 
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions are
+ * met:
+ *     Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ *     Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ *  
+ *   Neither the name of the Arch Rock Corporation nor the names of its
+ * contributors may be used to endorse or promote products derived from
+ * this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO EVENT SHALL THE ARCHED
+ * ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING,
+ * BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS
+ * OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND
+ * ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR
+ * TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH
+ * DAMAGE.
+ */
+/**
+ *
+ * @author Kaisen Lin
+ * @author Phil Buonadonna
+ */
+module Tsl2561InternalP {
+  provides interface HplTSL256x[uint8_t id];
+  uses interface HplTSL256x as ToHPLC;
+}
+
+implementation {
+  uint8_t currentId;
+  
+  command error_t HplTSL256x.measureCh0[uint8_t id]() {
+    currentId = id;
+    return call ToHPLC.measureCh0();
+  }
+  command error_t HplTSL256x.measureCh1[uint8_t id]() {
+    currentId = id;
+    return call ToHPLC.measureCh1();
+  }
+  command error_t HplTSL256x.setCONTROL[uint8_t id](uint8_t val) {
+    currentId = id;
+    return call ToHPLC.setCONTROL(val);
+  }
+  command error_t HplTSL256x.setTIMING[uint8_t id](uint8_t val) {
+    currentId = id;
+    return call ToHPLC.setTIMING(val);
+  }
+  command error_t HplTSL256x.setTHRESHLOW[uint8_t id](uint16_t val) {
+    currentId = id;
+    return call ToHPLC.setTHRESHLOW(val);
+  }
+  command error_t HplTSL256x.setTHRESHHIGH[uint8_t id](uint16_t val) {
+    currentId = id;
+    return call ToHPLC.setTHRESHHIGH(val);
+  }
+  command error_t HplTSL256x.setINTERRUPT[uint8_t id](uint8_t val) {
+    currentId = id;
+    return call ToHPLC.setINTERRUPT(val);
+  }
+  command error_t HplTSL256x.getID[uint8_t id]() {
+    currentId = id;
+    return call ToHPLC.getID();
+  }
+  
+  async event void ToHPLC.measureCh0Done(error_t result, uint16_t val) {
+    signal HplTSL256x.measureCh0Done[currentId](result, val);
+  }
+  async event void ToHPLC.measureCh1Done(error_t result, uint16_t val) {
+    signal HplTSL256x.measureCh1Done[currentId](result, val);
+  }
+  async event void ToHPLC.setCONTROLDone(error_t error) {
+    signal HplTSL256x.setCONTROLDone[currentId](error);
+  }
+  async event void ToHPLC.setTIMINGDone(error_t error) {
+    signal HplTSL256x.setTIMINGDone[currentId](error);
+  }
+  async event void ToHPLC.setTHRESHLOWDone(error_t error) {
+    signal HplTSL256x.setTHRESHLOWDone[currentId](error);
+  }
+  async event void ToHPLC.setTHRESHHIGHDone(error_t error) {
+    signal HplTSL256x.setTHRESHHIGHDone[currentId](error);
+  }
+  async event void ToHPLC.setINTERRUPTDone(error_t error) {
+    signal HplTSL256x.setINTERRUPTDone[currentId](error);
+  }
+  async event void ToHPLC.getIDDone(error_t error, uint8_t idval) {
+    signal HplTSL256x.getIDDone[currentId](error, idval);
+  }
+  async event void ToHPLC.alertThreshold() {
+    signal HplTSL256x.alertThreshold[currentId]();
+  }
+
+  default async event void HplTSL256x.measureCh0Done[uint8_t id]( error_t error, uint16_t val ){ return; }
+  default async event void HplTSL256x.measureCh1Done[uint8_t id]( error_t error, uint16_t val ){ return; }
+  default async event void HplTSL256x.setCONTROLDone[uint8_t id]( error_t error ){ return; }
+  default async event void HplTSL256x.setTIMINGDone[uint8_t id](error_t error){ return; }
+  default async event void HplTSL256x.setTHRESHLOWDone[uint8_t id](error_t error){ return;} 
+  default async event void HplTSL256x.setTHRESHHIGHDone[uint8_t id](error_t error){ return; }
+  default async event void HplTSL256x.setINTERRUPTDone[uint8_t id](error_t error){ return;} 
+  default async event void HplTSL256x.getIDDone[uint8_t id](error_t error, uint8_t idval){ return; }
+  default async event void HplTSL256x.alertThreshold[uint8_t id](){ return; }
+}