--- /dev/null
+/*
+ * Copyright (c) 2009 Communication Group and Eislab at
+ * Lulea University of Technology
+ *
+ * Contact: Laurynas Riliskis, LTU
+ * Mail: laurynas.riliskis@ltu.se
+ * All rights reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Communication Group at Lulea University of Technology
+ * nor the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
+ * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Copyright (c) 2005-2006 Arch Rock Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of the Arch Rock Corporation nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE
+ */
+
+/**
+ * Types and definitions for the Dallas DS2782 I2C Battery Monitor
+ *
+ * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
+ * @author Phil Buonadonna <pbuonadonna@archrock.com>
+ */
+
+#ifndef _DS2782_H
+#define _DS2782_H
+
+#define DS2782_PTR_SC (0x01)
+#define DS2782_PTR_TEMPMSB (0x0A)
+#define DS2782_PTR_TEMPLSB (0x0B)
+#define DS2782_PTR_VOLTMSB (0x0C)
+#define DS2782_PTR_VOLTLSB (0x0D)
+#define DS2782_PTR_CURRMSB (0x0E)
+#define DS2782_PTR_CURRLSB (0x0F)
+#define DS2782_PTR_ACCURMSB (0x10)
+#define DS2782_PTR_ACCURLSB (0x11)
+#define DS2782_PTR_OFFSETBIAS (0x61)
+#define DS2782_PTR_ACCBIAS (0x62)
+#define DS2782_PTR_CONTROL (0x60)
+
+#define DS2782_SC_PORF (1 << 6)
+#define DS2782_SC_SMOD (1 << 5)
+#define DS2782_SC_NBEN (1 << 4)
+#define DS2782_SC_PIO (1 << 3)
+#define DS2782_SC_FQ(_x) (((_x) & 0x3))
+
+#endif /* _DS2782_H */
--- /dev/null
+/*
+ * Copyright (c) 2009 Communication Group and Eislab at
+ * Lulea University of Technology
+ *
+ * Contact: Laurynas Riliskis, LTU
+ * Mail: laurynas.riliskis@ltu.se
+ * All rights reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Communication Group at Lulea University of Technology
+ * nor the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
+ * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Copyright (c) 2005-2006 Arch Rock Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of the Arched Rock Corporation nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE
+ */
+
+/**
+ * HplDS2782 is the HPL inteface to the Dallas DS2782 I2C Battery
+ * Monitor.
+ *
+ * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
+ * @author Phil Buonadonna <pbuonadonna@archrock.com>
+ */
+
+interface HplDS2782 {
+
+ /**
+ * Sets a new value to the DS2782 configuration register.
+ *
+ * @param val the new value to be written
+ *
+ * @return SUCCESS if the set will be performed
+ */
+ command error_t setConfig( uint8_t val );
+
+ /**
+ * Signals the completion of the configuration register set.
+ *
+ * @param error SUCCESS if the set was successful
+ */
+ async event void setConfigDone( error_t error );
+
+ /**
+ * Tells the DS2782 whether or not is is allowed to go into sleep.
+ *
+ * @param allow True allows sleep.
+ *
+ * @return SUCCESS if the set will be performed
+ */
+ command error_t allowSleep(bool allow);
+
+ /**
+ * Signals the completion of the sleep call.
+ *
+ * @param error SUCCESS if the set was successful
+ */
+ async event void allowSleepDone( error_t error );
+
+ /**
+ * Starts a temperature measurement.
+ *
+ * @return SUCCESS if the measurement will be made
+ */
+ command error_t measureTemperature();
+
+ /**
+ * Presents the result of a temperature measurement.
+ *
+ * @param error SUCCESS if the measurement was successful
+ * @param val the temperature reading
+ */
+ async event void measureTemperatureDone( error_t error, uint16_t val );
+
+
+ /**
+ * Starts a voltage measurement.
+ *
+ * @return SUCCESS if the measurement will be made
+ */
+ command error_t measureVoltage();
+
+ /**
+ * Presents the result of a voltage measurement.
+ *
+ * @param error SUCCESS if the measurement was successful
+ * @param val the voltage reading
+ */
+ async event void measureVoltageDone( error_t error, uint16_t val);
+
+
+ /**
+ * Starts a current measurement.
+ *
+ * @return SUCCESS if the measurement will be made
+ */
+ command error_t measureCurrent();
+
+ /**
+ * Presents the result of a current measurement.
+ *
+ * @param error SUCCESS if the measurement was successful
+ * @param val the current reading
+ */
+ async event void measureCurrentDone( error_t error, uint16_t val);
+
+
+ /**
+ * Starts an accumulated current measurement.
+ *
+ * @return SUCCESS if the measurement will be made
+ */
+ command error_t measureAccCurrent();
+
+ /**
+ * Presents the result of a accumulated current measurement.
+ *
+ * @param error SUCCESS if the measurement was successful
+ * @param val the accumulated current reading
+ */
+ async event void measureAccCurrentDone( error_t error, uint16_t val);
+
+
+ /**
+ * Initiates setting of the current offset bias value
+ *
+ * @param The signed two's complement bias value.
+ *
+ * @return SUCCESS if the setting will be made
+ */
+ command error_t setOffsetBias(int8_t val);
+
+ /**
+ * Signals completion and error, if any, in setting the current
+ * offset bias value.
+ *
+ * @param error SUCCESS if the setting was successful
+ */
+ async event void setOffsetBiasDone( error_t error );
+
+
+ /**
+ * Initiates setting of the accumulated current offset bias value
+ *
+ * @param The signed two's complement bias value.
+ *
+ * @return SUCCESS if the setting will be made
+ */
+ command error_t setAccOffsetBias(int8_t val);
+
+ /**
+ * Signals completion and error, if any, in setting the accumulated
+ * current offset bias value.
+ *
+ * @param error SUCCESS if the setting was successful
+ */
+ async event void setAccOffsetBiasDone( error_t error );
+
+
+}
--- /dev/null
+/*
+ * Copyright (c) 2009 Communication Group and Eislab at
+ * Lulea University of Technology
+ *
+ * Contact: Laurynas Riliskis, LTU
+ * Mail: laurynas.riliskis@ltu.se
+ * All rights reserved.
+ *
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of Communication Group at Lulea University of Technology
+ * nor the names of its contributors may be used to endorse or promote
+ * products derived from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL STANFORD
+ * UNIVERSITY OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/*
+ * Copyright (c) 2005-2006 Arch Rock Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of the Arched Rock Corporation nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE
+ */
+
+/**
+ * HplDS2782LogicP is the driver for the Dallas DS2782. It requires
+ * I2C packet and resource interfaces and provides the HplDS2782 HPL interface.
+ *
+ * @author Henrik Makitaavola <henrik.makitaavola@gmail.com>
+ * @author Phil Buonadonna <pbuonadonna@archrock.com>
+ */
+
+#include "DS2782.h"
+#include "I2C.h"
+
+generic module HplDS2782LogicP(uint16_t devAddr)
+{
+ provides interface StdControl;
+ provides interface HplDS2782;
+
+ uses interface I2CPacket<TI2CBasicAddr>;
+ uses interface Resource as I2CResource;
+
+}
+
+implementation {
+
+ enum {
+ STATE_IDLE,
+ STATE_STOPPED,
+ STATE_SETCONFIG,
+ STATE_READTEMP,
+ STATE_READVOLTAGE,
+ STATE_READCURRENT,
+ STATE_READACCCURRENT,
+ STATE_SETBIAS,
+ STATE_SETACCBIAS,
+ STATE_ALLOWSLEEP
+ };
+
+ uint8_t mI2CBuffer[4];
+ uint8_t mState = STATE_STOPPED;
+ bool read;
+
+ norace error_t mSSError = SUCCESS;
+
+ static error_t doReadReg(uint8_t nextState, uint8_t reg) {
+ error_t error = SUCCESS;
+
+ atomic {
+ if (mState == STATE_IDLE) {
+ mState = nextState;
+ }
+ else {
+ error = EBUSY;
+ }
+ }
+ if (error)
+ return error;
+
+ mI2CBuffer[0] = reg;
+ read = true;
+ error = call I2CResource.request();
+
+ if (error)
+ atomic mState = STATE_IDLE;
+
+ return error;
+
+ }
+
+ static error_t doSetReg(uint8_t nextState, uint8_t reg, uint16_t val) {
+ error_t error = SUCCESS;
+
+ atomic {
+ if (mState == STATE_IDLE) {
+ mState = nextState;
+ }
+ else {
+ error = EBUSY;
+ }
+ }
+ if (error)
+ return error;
+
+ mI2CBuffer[0] = reg;
+ mI2CBuffer[1] = val;
+
+ read = false;
+ error = call I2CResource.request();
+
+ if (error)
+ atomic mState = STATE_IDLE;
+
+ return error;
+ }
+
+ command error_t StdControl.start() {
+ error_t error = SUCCESS;
+ atomic {
+ if (mState == STATE_STOPPED) {
+ mState = STATE_IDLE;
+ }
+ else {
+ error = EBUSY;
+ }
+ }
+ return error;
+ }
+
+ command error_t StdControl.stop() {
+ error_t error = SUCCESS;
+ atomic {
+ if (mState == STATE_IDLE) {
+ mState = STATE_STOPPED;
+ }
+ else {
+ error = EBUSY;
+ }
+ }
+ return error;
+ }
+
+ command error_t HplDS2782.setConfig(uint8_t val) {
+ return doSetReg(STATE_SETCONFIG,DS2782_PTR_SC,val);
+ }
+
+ command error_t HplDS2782.allowSleep(bool allow) {
+ if (allow)
+ return doSetReg(STATE_ALLOWSLEEP,DS2782_PTR_CONTROL,0x60);
+ else
+ return doSetReg(STATE_ALLOWSLEEP,DS2782_PTR_CONTROL,0x0);
+ }
+
+ command error_t HplDS2782.measureTemperature() {
+ return doReadReg(STATE_READTEMP,DS2782_PTR_TEMPMSB);
+ }
+
+ command error_t HplDS2782.measureVoltage() {
+ return doReadReg(STATE_READVOLTAGE,DS2782_PTR_VOLTMSB);
+ }
+
+ command error_t HplDS2782.measureCurrent() {
+ return doReadReg(STATE_READCURRENT,DS2782_PTR_CURRMSB);
+ }
+
+ command error_t HplDS2782.measureAccCurrent() {
+ return doReadReg(STATE_READTEMP,DS2782_PTR_ACCURMSB);
+ }
+
+ command error_t HplDS2782.setOffsetBias(int8_t val) {
+ return doSetReg(STATE_SETBIAS,DS2782_PTR_OFFSETBIAS,val);
+ }
+
+ command error_t HplDS2782.setAccOffsetBias(int8_t val) {
+ return doSetReg(STATE_SETACCBIAS,DS2782_PTR_ACCBIAS,val);
+ }
+
+ async event void I2CPacket.readDone(error_t i2c_error, uint16_t chipAddr, uint8_t len, uint8_t *buf) {
+ uint16_t tempVal;
+ tempVal = buf[0];
+ tempVal = ((tempVal << 8) | buf[1]);
+
+ switch (mState) {
+ case STATE_READTEMP:
+ signal HplDS2782.measureTemperatureDone(i2c_error,tempVal);
+ break;
+ case STATE_READVOLTAGE:
+ signal HplDS2782.measureVoltageDone(i2c_error,tempVal);
+ break;
+ case STATE_READCURRENT:
+ signal HplDS2782.measureCurrentDone(i2c_error,tempVal);
+ break;
+ case STATE_READACCCURRENT:
+ signal HplDS2782.measureAccCurrentDone(i2c_error,tempVal);
+ break;
+ default:
+ break;
+ }
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ return;
+ }
+
+ event void I2CResource.granted() {
+ if (read) {
+ call I2CPacket.write(I2C_START,devAddr,1,mI2CBuffer);
+ } else {
+ call I2CPacket.write((I2C_START | I2C_STOP),devAddr,2,mI2CBuffer);
+ }
+ }
+
+ async event void I2CPacket.writeDone(error_t i2c_error, uint16_t chipAddr, uint8_t len, uint8_t *buf) {
+ error_t error = i2c_error;
+
+ switch (mState) {
+ case STATE_SETCONFIG:
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ signal HplDS2782.setConfigDone(error);
+ break;
+ case STATE_READTEMP:
+ if (error)
+ signal HplDS2782.measureTemperatureDone(error,0);
+ else
+ error = call I2CPacket.read((I2C_START | I2C_STOP),devAddr,2,mI2CBuffer);
+ break;
+ case STATE_READVOLTAGE:
+ if (error)
+ signal HplDS2782.measureVoltageDone(error,0);
+ else
+ error = call I2CPacket.read((I2C_START | I2C_STOP),devAddr,2,mI2CBuffer);
+ break;
+ case STATE_READCURRENT:
+ if (error)
+ signal HplDS2782.measureCurrentDone(error,0);
+ else
+ error = call I2CPacket.read((I2C_START | I2C_STOP),devAddr,2,mI2CBuffer);
+ break;
+ case STATE_READACCCURRENT:
+ if (error)
+ signal HplDS2782.measureAccCurrentDone(error,0);
+ else
+ error = call I2CPacket.read((I2C_START | I2C_STOP),devAddr,2,mI2CBuffer);
+ break;
+ case STATE_SETBIAS:
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ signal HplDS2782.setOffsetBiasDone(error);
+ break;
+ case STATE_SETACCBIAS:
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ signal HplDS2782.setAccOffsetBiasDone(error);
+ break;
+ case STATE_ALLOWSLEEP:
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ signal HplDS2782.allowSleepDone(error);
+ break;
+ default:
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ break;
+ }
+ if (error) {
+ call I2CResource.release();
+ atomic mState = STATE_IDLE;
+ }
+ return;
+ }
+
+ default async event void HplDS2782.setConfigDone(error_t error) { return; }
+ default async event void HplDS2782.allowSleepDone( error_t error ) { return; }
+ default async event void HplDS2782.measureTemperatureDone( error_t error, uint16_t val ){ return; }
+ default async event void HplDS2782.measureVoltageDone( error_t error, uint16_t val ){ return; }
+ default async event void HplDS2782.measureCurrentDone( error_t error, uint16_t val ){ return; }
+ default async event void HplDS2782.measureAccCurrentDone( error_t error, uint16_t val ){ return; }
+ default async event void HplDS2782.setOffsetBiasDone( error_t error ){ return; }
+ default async event void HplDS2782.setAccOffsetBiasDone(error_t error){ return; }
+}