--- /dev/null
+/*
+ * Silicon Laboratories CP210x USB to RS232 serial adaptor driver
+ *
+ * Copyright (C) 2005 Craig Shelley (craig@microtron.org.uk)
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License version
+ * 2 as published by the Free Software Foundation.
+ *
+ * Support to set flow control line levels using TIOCMGET and TIOCMSET
+ * thanks to Karl Hiramoto karl@hiramoto.org. RTSCTS hardware flow
+ * control thanks to Munir Nassar nassarmu@real-time.com
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/slab.h>
+#include <linux/tty.h>
+#include <linux/tty_flip.h>
+#include <linux/module.h>
+#include <linux/moduleparam.h>
+#include <linux/usb.h>
+#include <asm/uaccess.h>
+#include <linux/usb/serial.h>
+#include "cp210x.h"
+
+/*
+ * Version Information
+ */
+#define DRIVER_VERSION "vxxDEBVERxx"
+#define DRIVER_DESC "Silicon Labs CP210x RS232 serial adaptor driver"
+
+/*
+ * Function Prototypes
+ */
+static int cp210x_open(struct usb_serial_port*, struct file*);
+static void cp210x_cleanup(struct usb_serial_port*);
+static void cp210x_close(struct usb_serial_port*, struct file*);
+static void cp210x_get_termios(struct usb_serial_port*);
+static void cp210x_set_termios(struct usb_serial_port*, struct ktermios*);
+static int cp210x_tiocmget(struct usb_serial_port *, struct file *);
+static int cp210x_tiocmset(struct usb_serial_port *, struct file *,
+ unsigned int, unsigned int);
+static void cp210x_break_ctl(struct usb_serial_port*, int);
+static int cp210x_startup(struct usb_serial *);
+static void cp210x_shutdown(struct usb_serial*);
+static int cp210x_ioctl(struct usb_serial_port *, struct file *,
+ unsigned int, unsigned long);
+
+static int debug;
+
+static const struct usb_device_id id_table[] = {
+ { USB_DEVICE(0x0471, 0x066A) }, /* AKTAKOM ACE-1001 cable */
+ { USB_DEVICE(0x0489, 0xE000) }, /* Pirelli Broadband S.p.A, DP-L10 SIP/GSM Mobile */
+ { USB_DEVICE(0x0745, 0x1000) }, /* CipherLab USB CCD Barcode Scanner 1000 */
+ { USB_DEVICE(0x08e6, 0x5501) }, /* Gemalto Prox-PU/CU contactless smartcard reader */
+ { USB_DEVICE(0x08FD, 0x000A) }, /* Digianswer A/S , ZigBee/802.15.4 MAC Device */
+ { USB_DEVICE(0x0FCF, 0x1003) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x0FCF, 0x1004) }, /* Dynastream ANT2USB */
+ { USB_DEVICE(0x0FCF, 0x1006) }, /* Dynastream ANT development board */
+ { USB_DEVICE(0x10A6, 0xAA26) }, /* Knock-off DCU-11 cable */
+ { USB_DEVICE(0x10AB, 0x10C5) }, /* Siemens MC60 Cable */
+ { USB_DEVICE(0x10B5, 0xAC70) }, /* Nokia CA-42 USB */
+ { USB_DEVICE(0x10C4, 0x0F91) }, /* Vstabi */
+ { USB_DEVICE(0x10C4, 0x1101) }, /* Arkham Technology DS101 Bus Monitor */
+ { USB_DEVICE(0x10C4, 0x1601) }, /* Arkham Technology DS101 Adapter */
+ { USB_DEVICE(0x10C4, 0x800A) }, /* SPORTident BSM7-D-USB main station */
+ { USB_DEVICE(0x10C4, 0x803B) }, /* Pololu USB-serial converter */
+ { USB_DEVICE(0x10C4, 0x8053) }, /* Enfora EDG1228 */
+ { USB_DEVICE(0x10C4, 0x8054) }, /* Enfora GSM2228 */
+ { USB_DEVICE(0x10C4, 0x8066) }, /* Argussoft In-System Programmer */
+ { USB_DEVICE(0x10C4, 0x807A) }, /* Crumb128 board */
+ { USB_DEVICE(0x10C4, 0x80CA) }, /* Degree Controls Inc */
+ { USB_DEVICE(0x10C4, 0x80DD) }, /* Tracient RFID */
+ { USB_DEVICE(0x10C4, 0x80F6) }, /* Suunto sports instrument */
+ { USB_DEVICE(0x10C4, 0x8115) }, /* Arygon NFC/Mifare Reader */
+ { USB_DEVICE(0x10C4, 0x813D) }, /* Burnside Telecom Deskmobile */
+ { USB_DEVICE(0x10C4, 0x813F) }, /* Tams Master Easy Control */
+ { USB_DEVICE(0x10C4, 0x814A) }, /* West Mountain Radio RIGblaster P&P */
+ { USB_DEVICE(0x10C4, 0x814B) }, /* West Mountain Radio RIGtalk */
+ { USB_DEVICE(0x10C4, 0x815E) }, /* Helicomm IP-Link 1220-DVM */
+ { USB_DEVICE(0x10C4, 0x819F) }, /* MJS USB Toslink Switcher */
+ { USB_DEVICE(0x10C4, 0x81A6) }, /* ThinkOptics WavIt */
+ { USB_DEVICE(0x10C4, 0x81AC) }, /* MSD Dash Hawk */
+ { USB_DEVICE(0x10C4, 0x81C8) }, /* Lipowsky Industrie Elektronik GmbH, Baby-JTAG */
+ { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */
+ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */
+ { USB_DEVICE(0x10C4, 0x81E8) }, /* Zephyr Bioharness */
+ { USB_DEVICE(0x10C4, 0x81F2) }, /* C1007 HF band RFID controller */
+ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */
+ { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */
+ { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */
+ { USB_DEVICE(0x10C4, 0x8293) }, /* Telegesys ETRX2USB */
+ { USB_DEVICE(0x10C4, 0x82F9) }, /* Procyon AVS */
+ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */
+ { USB_DEVICE(0x10C4, 0x8382) }, /* Cygnal Integrated Products, Inc. */
+ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */
+ { USB_DEVICE(0x10C4, 0x8411) }, /* Kyocera GPS Module */
+ { USB_DEVICE(0x10C4, 0x846E) }, /* BEI USB Sensor Interface (VCP) */
+ { USB_DEVICE(0x10C4, 0xEA60) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xEA61) }, /* Silicon Labs factory default */
+ { USB_DEVICE(0x10C4, 0xF001) }, /* Elan Digital Systems USBscope50 */
+ { USB_DEVICE(0x10C4, 0xF002) }, /* Elan Digital Systems USBwave12 */
+ { USB_DEVICE(0x10C4, 0xF003) }, /* Elan Digital Systems USBpulse100 */
+ { USB_DEVICE(0x10C4, 0xF004) }, /* Elan Digital Systems USBcount50 */
+ { USB_DEVICE(0x10C5, 0xEA61) }, /* Silicon Labs MobiData GPRS USB Modem */
+ { USB_DEVICE(0x10CE, 0xEA6A) }, /* Silicon Labs MobiData GPRS USB Modem 100EU */
+ { USB_DEVICE(0x13AD, 0x9999) }, /* Baltech card reader */
+ { USB_DEVICE(0x1555, 0x0004) }, /* Owen AC4 USB-RS485 Converter */
+ { USB_DEVICE(0x166A, 0x0303) }, /* Clipsal 5500PCU C-Bus USB interface */
+ { USB_DEVICE(0x16D6, 0x0001) }, /* Jablotron serial interface */
+ { USB_DEVICE(0x18EF, 0xE00F) }, /* ELV USB-I2C-Interface */
+ { USB_DEVICE(0x413C, 0x9500) }, /* DW700 GPS USB interface */
+ { } /* Terminating Entry */
+};
+
+MODULE_DEVICE_TABLE(usb, id_table);
+
+static struct usb_driver cp210x_driver = {
+ .name = "cp210x",
+ .probe = usb_serial_probe,
+ .disconnect = usb_serial_disconnect,
+ .id_table = id_table,
+ .no_dynamic_id = 1,
+};
+
+static struct usb_serial_driver cp210x_device = {
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "cp210x",
+ },
+ .usb_driver = &cp210x_driver,
+ .id_table = id_table,
+ .num_interrupt_in = 0,
+ .num_bulk_in = NUM_DONT_CARE,
+ .num_bulk_out = NUM_DONT_CARE,
+ .num_ports = 1,
+ .open = cp210x_open,
+ .close = cp210x_close,
+ .ioctl = cp210x_ioctl,
+ .break_ctl = cp210x_break_ctl,
+ .set_termios = cp210x_set_termios,
+ .tiocmget = cp210x_tiocmget,
+ .tiocmset = cp210x_tiocmset,
+ .attach = cp210x_startup,
+ .shutdown = cp210x_shutdown,
+};
+
+/* Config SET requests. To GET, add 1 to the request number */
+#define CP2101_UART 0x00 /* Enable / Disable */
+#define CP2101_BAUDRATE 0x01 /* (BAUD_RATE_GEN_FREQ / baudrate) */
+#define CP2101_BITS 0x03 /* 0x(0)(databits)(parity)(stopbits) */
+#define CP2101_BREAK 0x05 /* On / Off */
+#define CP2101_CONTROL 0x07 /* Flow control line states */
+#define CP2101_MODEMCTL 0x13 /* Modem controls */
+#define CP2101_CONFIG_6 0x19 /* 6 bytes of config data ??? */
+
+/* CP2101_UART */
+#define UART_ENABLE 0x0001
+#define UART_DISABLE 0x0000
+
+/* CP2101_BAUDRATE */
+#define BAUD_RATE_GEN_FREQ 0x384000
+
+/* CP2101_BITS */
+#define BITS_DATA_MASK 0X0f00
+#define BITS_DATA_5 0X0500
+#define BITS_DATA_6 0X0600
+#define BITS_DATA_7 0X0700
+#define BITS_DATA_8 0X0800
+#define BITS_DATA_9 0X0900
+
+#define BITS_PARITY_MASK 0x00f0
+#define BITS_PARITY_NONE 0x0000
+#define BITS_PARITY_ODD 0x0010
+#define BITS_PARITY_EVEN 0x0020
+#define BITS_PARITY_MARK 0x0030
+#define BITS_PARITY_SPACE 0x0040
+
+#define BITS_STOP_MASK 0x000f
+#define BITS_STOP_1 0x0000
+#define BITS_STOP_1_5 0x0001
+#define BITS_STOP_2 0x0002
+
+/* CP2101_BREAK */
+#define BREAK_ON 0x0000
+#define BREAK_OFF 0x0001
+
+/* CP2101_CONTROL */
+#define CONTROL_DTR 0x0001
+#define CONTROL_RTS 0x0002
+#define CONTROL_CTS 0x0010
+#define CONTROL_DSR 0x0020
+#define CONTROL_RING 0x0040
+#define CONTROL_DCD 0x0080
+#define CONTROL_WRITE_DTR 0x0100
+#define CONTROL_WRITE_RTS 0x0200
+
+/* cp210x_get_partnum() return codes */
+#define CP210x_PART_UNKNOWN 0x00
+#define CP210x_PART_CP2101 0x01
+#define CP210x_PART_CP2102 0x02
+#define CP210x_PART_CP2103 0x03
+
+/* Taken from drivers/usb/gadget/usbstring.c */
+static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
+{
+ int count = 0;
+ u8 c;
+ u16 uchar;
+
+ /* this insists on correct encodings, though not minimal ones.
+ * BUT it currently rejects legit 4-byte UTF-8 code points,
+ * which need surrogate pairs. (Unicode 3.1 can use them.)
+ */
+ while (len != 0 && (c = (u8) *s++) != 0) {
+ if (unlikely(c & 0x80)) {
+ // 2-byte sequence:
+ // 00000yyyyyxxxxxx = 110yyyyy 10xxxxxx
+ if ((c & 0xe0) == 0xc0) {
+ uchar = (c & 0x1f) << 6;
+
+ c = (u8) *s++;
+ if ((c & 0xc0) != 0x80)
+ goto fail;
+ c &= 0x3f;
+ uchar |= c;
+
+ // 3-byte sequence (most CJKV characters):
+ // zzzzyyyyyyxxxxxx = 1110zzzz 10yyyyyy 10xxxxxx
+ } else if ((c & 0xf0) == 0xe0) {
+ uchar = (c & 0x0f) << 12;
+
+ c = (u8) *s++;
+ if ((c & 0xc0) != 0x80)
+ goto fail;
+ c &= 0x3f;
+ uchar |= c << 6;
+
+ c = (u8) *s++;
+ if ((c & 0xc0) != 0x80)
+ goto fail;
+ c &= 0x3f;
+ uchar |= c;
+
+ /* no bogus surrogates */
+ if (0xd800 <= uchar && uchar <= 0xdfff)
+ goto fail;
+
+ // 4-byte sequence (surrogate pairs, currently rare):
+ // 11101110wwwwzzzzyy + 110111yyyyxxxxxx
+ // = 11110uuu 10uuzzzz 10yyyyyy 10xxxxxx
+ // (uuuuu = wwww + 1)
+ // FIXME accept the surrogate code points (only)
+
+ } else
+ goto fail;
+ } else
+ uchar = c;
+ *cp++ = uchar;
+ count++;
+ len--;
+ }
+ return count;
+fail:
+ return -1;
+}
+
+
+/*
+ * make_usb_string
+ * Populates usbstr with: (len) + (USB_DT_STRING) + unicode(str). Each char in
+ * usbstr consumes two bytes in unicode (__le16) format.
+ * Returns the resulting length of usbstr in bytes.
+ * This function can accept overlapping usbstr and str as long as the overlap
+ * does not cause data written to usbstr to overwrite data not yet read from
+ * str.
+ */
+static int make_usb_string(__le16* usbstr, size_t usblen, const char *src,
+ size_t srclen)
+{
+ int len;
+
+ /* string descriptors have length, type, then UTF16-LE text */
+ if (usblen > 254)
+ usblen = 254;
+ len = min(usblen / 2 - 1, srclen);
+ len = utf8_to_utf16le(src, usbstr + 1, len);
+ if (len >= 0) {
+ len = (len + 1) * 2;
+ ((u8 *)usbstr)[0] = len;
+ ((u8 *)usbstr)[1] = USB_DT_STRING;
+ }
+ return len;
+}
+
+/*
+ * cp210x_usbstr_from_user
+ * Populate kbuf with a usb string derived from a user space variable. klen
+ * is the size of the buffer at kbuf.
+ * Returns the number of bytes used in kbuf.
+ */
+static size_t cp210x_usbstr_from_user(__le16 *kbuf,
+ struct cp210x_buffer __user *ubuf, size_t klen)
+{
+ struct cp210x_buffer t;
+ char *str;
+ size_t slen;
+
+ if (copy_from_user(&t, ubuf, sizeof(t)))
+ return -EINVAL;
+ slen = klen / 2 - 1;
+ if (!t.buf || !t.len || t.len > slen)
+ return -EINVAL;
+ if (t.len < slen)
+ slen = t.len;
+ str = (char *)kbuf + klen - slen;
+ if (copy_from_user(str, (__u8 __user *)t.buf, slen))
+ return -EINVAL;
+ return make_usb_string(kbuf, klen, str, slen);
+}
+
+/*
+ * cp210x_ctlmsg
+ * A generic usb control message interface.
+ * Returns the actual size of the data read or written within the message, 0
+ * if no data were read or written, or a negative value to indicate an error.
+ */
+static int cp210x_ctlmsg(struct usb_serial_port *port, u8 request,
+ u8 requestype, u16 value, u16 index, void *data, u16 size)
+{
+ struct usb_device *dev = port->serial->dev;
+ u8 *tbuf;
+ int ret;
+
+ tbuf = kmalloc(size, GFP_KERNEL);
+ if (!tbuf)
+ return -ENOMEM;
+ if (requestype & USB_DIR_IN) {
+ ret = usb_control_msg(dev, usb_rcvctrlpipe(dev, 0), request,
+ requestype, value, index, tbuf, size, 300);
+ if (ret > 0 && size)
+ memcpy(data, tbuf, size);
+ } else {
+ if (size)
+ memcpy(tbuf, data, size);
+ ret = usb_control_msg(dev, usb_sndctrlpipe(dev, 0), request,
+ requestype, value, index, tbuf, size, 300);
+ }
+ kfree(tbuf);
+ if (ret < 0 && ret != -EPIPE) {
+ dev_printk(KERN_DEBUG, &dev->dev,
+ "cp210x: ctl failed cmd rqt %u rq %u len %u ret %d\n",
+ requestype, request, size, ret);
+ }
+ return ret;
+}
+
+static int cp210x_reset(struct usb_serial_port *port)
+{
+ dbg("%s", __FUNCTION__);
+
+ /* Instructing the CP210X to reset seems to work more reliably than
+ * calling usb_reset_device().
+ */
+ cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x0008, 0x00, NULL, 0);
+ return 0;
+}
+
+static int cp210x_get_partnum(struct usb_serial_port *port)
+{
+ static u8 _partnum = CP210x_PART_UNKNOWN;
+
+ if (_partnum == CP210x_PART_UNKNOWN) {
+ u8 addr = port->serial->dev->actconfig->interface[0]->
+ cur_altsetting->endpoint[0].desc.bEndpointAddress &
+ USB_ENDPOINT_NUMBER_MASK;
+
+ if (addr == 0x03 || addr == 0x02)
+ _partnum = CP210x_PART_CP2101;
+ else if (addr == 0x01) {
+ /* Must query part to determine part number */
+ if (cp210x_ctlmsg(port, 0xff,
+ USB_DIR_IN|USB_TYPE_VENDOR,
+ 0x370b, 0x00, &_partnum, 1) != 1)
+ _partnum = CP210x_PART_UNKNOWN;
+ }
+ }
+ dbg("%s - partnum %u", __FUNCTION__, _partnum);
+ return _partnum;
+}
+
+static inline int cp210x_setu16(struct usb_serial_port *port, int cmd,
+ unsigned int value)
+{
+ return cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x3700 | (cmd & 0xff), value, NULL, 0);
+}
+
+/*
+ * cp210x_setstr
+ *
+ * Set a USB string descriptor using proprietary cp210x control messages.
+ * Return the number of characters actually written.
+ */
+static int cp210x_setstr(struct usb_serial_port *port, int cmd, __le16 *usbstr)
+{
+ int len = ((u8 *)usbstr)[0];
+ int ret = cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x3700 | (cmd & 0xff), 0, usbstr, len);
+ dbg("%s - cmd 0x%02x len %d ret %d", __FUNCTION__, cmd, len, ret);
+ return ret;
+}
+
+/* Set all gpio simultaneously */
+static int cp210x_gpioset(struct usb_serial_port *port, u8 gpio)
+{
+ dbg("%s - port %d, gpio = 0x%.2x", __FUNCTION__, port->number, gpio);
+
+ return cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x37e1, ((uint16_t)gpio << 8) | GPIO_MASK, NULL, 0);
+}
+
+/* Set select gpio bits */
+static int cp210x_gpiosetb(struct usb_serial_port *port, u8 set, u8 clear)
+{
+ u16 gpio = 0;
+
+ /* The bitmask is in the LSB, the values in the MSB */
+ if (set & GPIO_0)
+ gpio |= (GPIO_0 << 8)|GPIO_0;
+ if (set & GPIO_1)
+ gpio |= (GPIO_1 << 8)|GPIO_1;
+ if (set & GPIO_2)
+ gpio |= (GPIO_2 << 8)|GPIO_2;
+ if (set & GPIO_3)
+ gpio |= (GPIO_3 << 8)|GPIO_3;
+ if (clear & GPIO_0)
+ gpio = (gpio & ~(GPIO_0 << 8))|GPIO_0;
+ if (clear & GPIO_1)
+ gpio = (gpio & ~(GPIO_1 << 8))|GPIO_1;
+ if (clear & GPIO_2)
+ gpio = (gpio & ~(GPIO_2 << 8))|GPIO_2;
+ if (clear & GPIO_3)
+ gpio = (gpio & ~(GPIO_3 << 8))|GPIO_3;
+
+ dbg("%s - port %d, gpiob = 0x%.4x", __FUNCTION__, port->number, gpio);
+
+ return cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR,
+ 0x37e1, gpio, NULL, 0);
+}
+
+static int cp210x_gpioget(struct usb_serial_port *port, u8 *gpio)
+{
+ int ret;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ ret = cp210x_ctlmsg(port, 0xff, USB_DIR_IN|USB_TYPE_VENDOR,
+ 0x00c2, 0, gpio, 1);
+
+ dbg("%s - gpio = 0x%.2x (%d)", __FUNCTION__, *gpio, ret);
+
+ return (ret == 1) ? 0 : -1;
+}
+
+static int cp210x_portconfset(struct usb_serial_port *port,
+ struct cp210x_port_config *config)
+{
+ struct cp210x_port_config lconfig;
+ int ret;
+
+ dbg("%s", __FUNCTION__);
+
+ memcpy(&lconfig, config, sizeof(lconfig));
+
+ /* Words from cp210x are MSB */
+ lconfig.reset.mode = cpu_to_be16(config->reset.mode);
+ lconfig.reset.latch = cpu_to_be16(config->reset.latch);
+ lconfig.suspend.mode = cpu_to_be16(config->suspend.mode);
+ lconfig.suspend.latch = cpu_to_be16(config->suspend.latch);
+ /* apparently not implemented by CP210X firmware */
+ lconfig.suspend.lowPower = 0;
+ lconfig.reset.lowPower = 0;
+
+ ret = cp210x_ctlmsg(port, 0xff, USB_TYPE_VENDOR, 0x370c,
+ 0, &lconfig, sizeof(struct cp210x_port_config));
+ if (ret == sizeof(struct cp210x_port_config))
+ return 0;
+ else if (ret >= 0)
+ return -1;
+ else
+ return ret;
+}
+
+static int cp210x_portconfget(struct usb_serial_port *port,
+ struct cp210x_port_config *config)
+{
+ int ret;
+
+ dbg("%s", __FUNCTION__);
+
+ ret = cp210x_ctlmsg(port, 0xff, USB_DIR_IN|USB_TYPE_VENDOR,
+ 0x370c, 0, config, sizeof(struct cp210x_port_config));
+ if (ret == sizeof(struct cp210x_port_config)) {
+ /* Words from cp210x are MSB */
+ config->reset.mode = be16_to_cpu(config->reset.mode);
+ config->reset.lowPower = be16_to_cpu(config->reset.lowPower);
+ config->reset.latch = be16_to_cpu(config->reset.latch);
+ config->suspend.mode = be16_to_cpu(config->suspend.mode);
+ config->suspend.lowPower =
+ be16_to_cpu(config->suspend.lowPower);
+ config->suspend.latch = be16_to_cpu(config->suspend.latch);
+
+ /* apparently not implemented yet */
+ config->reset.lowPower = 0;
+ config->suspend.lowPower = 0;
+
+ return 0;
+ } else if (ret >= 0)
+ return -1;
+ else
+ return ret;
+
+}
+
+/*
+ * cp210x_get_config
+ * Reads from the CP210x configuration registers
+ * 'size' is specified in bytes.
+ * 'data' is a pointer to a pre-allocated array of integers large
+ * enough to hold 'size' bytes (with 4 bytes to each integer)
+ */
+static int cp210x_get_config(struct usb_serial_port *port, u8 request,
+ unsigned int *data, int size)
+{
+ struct usb_serial *serial = port->serial;
+ __le32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kcalloc(length, sizeof(__le32), GFP_KERNEL);
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n", __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* For get requests, the request number must be incremented */
+ request++;
+
+ /* Issue the request, attempting to read 'size' bytes */
+ result = usb_control_msg(serial->dev, usb_rcvctrlpipe(serial->dev, 0),
+ request,
+ USB_DIR_IN|USB_TYPE_VENDOR|USB_RECIP_INTERFACE,
+ 0x0000, 0, buf, size, 300);
+
+ /* Convert data into an array of integers */
+ for (i = 0; i < length; i++)
+ data[i] = le32_to_cpu(buf[i]);
+
+ kfree(buf);
+
+ if (result != size) {
+ dev_err(&port->dev, "%s - Unable to send config request, "
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+/*
+ * cp210x_set_config
+ * Writes to the CP210x configuration registers
+ * Values less than 16 bits wide are sent directly
+ * 'size' is specified in bytes.
+ */
+static int cp210x_set_config(struct usb_serial_port *port, u8 request,
+ unsigned int *data, int size)
+{
+ struct usb_serial *serial = port->serial;
+ __le32 *buf;
+ int result, i, length;
+
+ /* Number of integers required to contain the array */
+ length = (((size - 1) | 3) + 1)/4;
+
+ buf = kmalloc(length * sizeof(__le32), GFP_KERNEL);
+ if (!buf) {
+ dev_err(&port->dev, "%s - out of memory.\n",
+ __FUNCTION__);
+ return -ENOMEM;
+ }
+
+ /* Array of integers into bytes */
+ for (i = 0; i < length; i++)
+ buf[i] = cpu_to_le32(data[i]);
+
+ if (size > 2) {
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0), request,
+ USB_TYPE_VENDOR|USB_RECIP_INTERFACE, 0x0000,
+ 0, buf, size, 300);
+ } else {
+ result = usb_control_msg(serial->dev,
+ usb_sndctrlpipe(serial->dev, 0), request,
+ USB_TYPE_VENDOR|USB_RECIP_INTERFACE, data[0],
+ 0, NULL, 0, 300);
+ }
+
+ kfree(buf);
+
+ if ((size > 2 && result != size) || result < 0) {
+ dev_err(&port->dev, "%s - Unable to send request, "
+ "request=0x%x size=%d result=%d\n",
+ __FUNCTION__, request, size, result);
+ return -EPROTO;
+ }
+
+ return 0;
+}
+
+/*
+ * cp210x_set_config_single
+ * Convenience function for calling cp210x_set_config on single data values
+ * without requiring an integer pointer
+ */
+static inline int cp210x_set_config_single(struct usb_serial_port *port,
+ u8 request, unsigned int data)
+{
+ return cp210x_set_config(port, request, &data, 2);
+}
+
+static int cp210x_open(struct usb_serial_port *port, struct file *filp)
+{
+ struct usb_serial *serial = port->serial;
+ int result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (cp210x_set_config_single(port, CP2101_UART, UART_ENABLE)) {
+ dev_err(&port->dev, "%s - Unable to enable UART\n",
+ __FUNCTION__);
+ return -EPROTO;
+ }
+
+ /* Start reading from the device */
+ usb_fill_bulk_urb(port->read_urb, serial->dev,
+ usb_rcvbulkpipe(serial->dev,
+ port->bulk_in_endpointAddress),
+ port->read_urb->transfer_buffer,
+ port->read_urb->transfer_buffer_length,
+ serial->type->read_bulk_callback,
+ port);
+ result = usb_submit_urb(port->read_urb, GFP_KERNEL);
+ if (result) {
+ dev_err(&port->dev, "%s - failed resubmitting read urb, "
+ "error %d\n", __FUNCTION__, result);
+ return result;
+ }
+
+ /* Configure the termios structure */
+ cp210x_get_termios(port);
+
+ /* Set the DTR and RTS pins low */
+ cp210x_tiocmset(port, NULL, TIOCM_DTR | TIOCM_RTS, 0);
+
+ return 0;
+}
+
+static void cp210x_cleanup(struct usb_serial_port *port)
+{
+ struct usb_serial *serial = port->serial;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (serial->dev) {
+ /* shutdown any bulk reads that might be going on */
+ if (serial->num_bulk_out)
+ usb_kill_urb(port->write_urb);
+ if (serial->num_bulk_in)
+ usb_kill_urb(port->read_urb);
+ }
+}
+
+static void cp210x_close(struct usb_serial_port *port, struct file *filp)
+{
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ /* shutdown our urbs */
+ dbg("%s - shutting down urbs", __FUNCTION__);
+ usb_kill_urb(port->write_urb);
+ usb_kill_urb(port->read_urb);
+
+ cp210x_set_config_single(port, CP2101_UART, UART_DISABLE);
+}
+
+static int cp210x_ioctl(struct usb_serial_port *port, struct file *file,
+ unsigned int cmd, unsigned long arg)
+{
+ dbg("%s (%d) cmd = 0x%04x", __FUNCTION__, port->number, cmd);
+
+ switch (cmd) {
+
+ case TIOCMGET:
+ {
+ int result = cp210x_tiocmget(port, file);
+ if (copy_to_user((int __user *)&arg, &result, sizeof(int)))
+ return -EFAULT;
+ return 0;
+ }
+ break;
+
+ case TIOCMSET:
+ case TIOCMBIS:
+ case TIOCMBIC:
+ {
+ int val = 0;
+
+ if (copy_from_user(&val, (int __user *)&arg, sizeof(int)))
+ return -EFAULT;
+
+ /* this looks wrong: TIOCMSET isn't going to work right */
+ if (cp210x_tiocmset(port, file, (cmd == TIOCMBIC) ? 0 : val,
+ (cmd == TIOCMBIC) ? val : 0))
+ return -EFAULT;
+ return 0;
+ }
+ break;
+
+ case CP210x_IOCTL_GPIOGET:
+ if (cp210x_get_partnum(port) == CP210x_PART_CP2103) {
+ u8 gpio = 0;
+ if (!cp210x_gpioget(port, &gpio) && !copy_to_user(
+ (__u8 __user *)arg, &gpio,
+ sizeof(gpio)))
+ return 0;
+ }
+ return -EFAULT;
+ break;
+
+ case CP210x_IOCTL_GPIOSET:
+ if (cp210x_get_partnum(port) == CP210x_PART_CP2103 &&
+ !cp210x_gpioset(port, arg))
+ return 0;
+ return -EFAULT;
+ break;
+
+ case CP210x_IOCTL_GPIOBIC:
+ case CP210x_IOCTL_GPIOBIS:
+ if (cp210x_get_partnum(port) == CP210x_PART_CP2103 &&
+ !cp210x_gpiosetb(port,
+ (cmd == CP210x_IOCTL_GPIOBIC) ? 0 : arg,
+ (cmd == CP210x_IOCTL_GPIOBIC) ? arg : 0))
+ return 0;
+ return -EFAULT;
+ break;
+
+ case CP210x_IOCTL_DEVICERESET:
+ return cp210x_reset(port);
+ break;
+
+ case CP210x_IOCTL_PORTCONFGET:
+ {
+ struct cp210x_port_config config;
+ if (!cp210x_portconfget(port, &config) && !copy_to_user(
+ (struct cp210x_port_config __user *)arg,
+ &config, sizeof(config)))
+ return 0;
+ }
+ return -EFAULT;
+ break;
+
+ case CP210x_IOCTL_PORTCONFSET:
+ {
+ struct cp210x_port_config config;
+ if (!copy_from_user(&config, (struct cp210x_port_config __user *)arg,
+ sizeof(config)) &&
+ !cp210x_portconfset(port, &config))
+ return 0;
+ return -EFAULT;
+ }
+ break;
+
+ case CP210x_IOCTL_SETVID:
+ {
+ unsigned int vid;
+ if (!copy_from_user(&vid, (unsigned int __user *)arg,
+ sizeof(unsigned int)) &&
+ !cp210x_setu16(port, 0x01, vid))
+ return 0;
+ return -EFAULT;
+ }
+ break;
+
+ case CP210x_IOCTL_SETPID:
+ {
+ unsigned int pid;
+ if (!copy_from_user(&pid, (unsigned int __user *)arg,
+ sizeof(unsigned int)) &&
+ !cp210x_setu16(port, 0x02, pid))
+ return 0;
+ return -EFAULT;
+ }
+ break;
+
+ case CP210x_IOCTL_SETPRODUCT:
+ {
+ __le16 usbstr[CP210x_MAX_PRODUCT_STRLEN + 1];
+ size_t len = cp210x_usbstr_from_user(usbstr,
+ (struct cp210x_buffer __user *)arg,
+ sizeof(usbstr));
+ if (len > 0 && cp210x_setstr(port, 0x03, usbstr) == len)
+ return 0;
+ return -EFAULT;
+ }
+ break;
+
+ case CP210x_IOCTL_SETSERIAL:
+ {
+ __le16 usbstr[CP210x_MAX_SERIAL_STRLEN + 1];
+ size_t len = cp210x_usbstr_from_user(usbstr,
+ (struct cp210x_buffer __user *)arg,
+ sizeof(usbstr));
+ if (len > 0 && cp210x_setstr(port, 0x04, usbstr) == len)
+ return 0;
+ return -EFAULT;
+ }
+ break;
+
+ case CP210x_IOCTL_SETDEVVER:
+ {
+ unsigned int ver;
+ if (!copy_from_user(&ver, (unsigned int __user *)arg,
+ sizeof(unsigned int)) &&
+ !cp210x_setu16(port, 0x07, ver))
+ return 0;
+ return -EFAULT;
+ }
+ break;
+
+ default:
+ dbg("%s not supported = 0x%04x", __FUNCTION__, cmd);
+ break;
+ }
+
+ return -ENOIOCTLCMD;
+}
+
+/*
+ * cp210x_get_termios
+ * Reads the baud rate, data bits, parity, stop bits and flow control mode
+ * from the device, corrects any unsupported values, and configures the
+ * termios structure to reflect the state of the device
+ */
+static void cp210x_get_termios(struct usb_serial_port *port)
+{
+ unsigned int cflag, modem_ctl[4];
+ int baud;
+ int bits;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->tty || !port->tty->termios) {
+ dbg("%s - no tty structures", __FUNCTION__);
+ return;
+ }
+
+ cp210x_get_config(port, CP2101_BAUDRATE, &baud, 2);
+ /* Convert to baudrate */
+ if (baud)
+ baud = BAUD_RATE_GEN_FREQ / baud;
+
+ dbg("%s - baud rate = %d", __FUNCTION__, baud);
+
+ tty_encode_baud_rate(port->tty, baud, baud);
+ cflag = port->tty->termios->c_cflag;
+
+ cp210x_get_config(port, CP2101_BITS, &bits, 2);
+ cflag &= ~CSIZE;
+ switch(bits & BITS_DATA_MASK) {
+ case BITS_DATA_5:
+ dbg("%s - data bits = 5", __FUNCTION__);
+ cflag |= CS5;
+ break;
+ case BITS_DATA_6:
+ dbg("%s - data bits = 6", __FUNCTION__);
+ cflag |= CS6;
+ break;
+ case BITS_DATA_7:
+ dbg("%s - data bits = 7", __FUNCTION__);
+ cflag |= CS7;
+ break;
+ case BITS_DATA_8:
+ dbg("%s - data bits = 8", __FUNCTION__);
+ cflag |= CS8;
+ break;
+ case BITS_DATA_9:
+ dbg("%s - data bits = 9 (not supported, "
+ "using 8 data bits)", __FUNCTION__);
+ cflag |= CS8;
+ bits &= ~BITS_DATA_MASK;
+ bits |= BITS_DATA_8;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ default:
+ dbg("%s - Unknown number of data bits, "
+ "using 8", __FUNCTION__);
+ cflag |= CS8;
+ bits &= ~BITS_DATA_MASK;
+ bits |= BITS_DATA_8;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ }
+
+ switch(bits & BITS_PARITY_MASK) {
+ case BITS_PARITY_NONE:
+ dbg("%s - parity = NONE", __FUNCTION__);
+ cflag &= ~PARENB;
+ break;
+ case BITS_PARITY_ODD:
+ dbg("%s - parity = ODD", __FUNCTION__);
+ cflag |= (PARENB|PARODD);
+ break;
+ case BITS_PARITY_EVEN:
+ dbg("%s - parity = EVEN", __FUNCTION__);
+ cflag &= ~PARODD;
+ cflag |= PARENB;
+ break;
+ case BITS_PARITY_MARK:
+ dbg("%s - parity = MARK (not supported, "
+ "disabling parity)", __FUNCTION__);
+ cflag &= ~PARENB;
+ bits &= ~BITS_PARITY_MASK;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ case BITS_PARITY_SPACE:
+ dbg("%s - parity = SPACE (not supported, "
+ "disabling parity)", __FUNCTION__);
+ cflag &= ~PARENB;
+ bits &= ~BITS_PARITY_MASK;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ default:
+ dbg("%s - Unknown parity mode, "
+ "disabling parity", __FUNCTION__);
+ cflag &= ~PARENB;
+ bits &= ~BITS_PARITY_MASK;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ }
+
+ cflag &= ~CSTOPB;
+ switch(bits & BITS_STOP_MASK) {
+ case BITS_STOP_1:
+ dbg("%s - stop bits = 1", __FUNCTION__);
+ break;
+ case BITS_STOP_1_5:
+ dbg("%s - stop bits = 1.5 (not supported, "
+ "using 1 stop bit)", __FUNCTION__);
+ bits &= ~BITS_STOP_MASK;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ case BITS_STOP_2:
+ dbg("%s - stop bits = 2", __FUNCTION__);
+ cflag |= CSTOPB;
+ break;
+ default:
+ dbg("%s - Unknown number of stop bits, "
+ "using 1 stop bit", __FUNCTION__);
+ bits &= ~BITS_STOP_MASK;
+ cp210x_set_config(port, CP2101_BITS, &bits, 2);
+ break;
+ }
+
+ cp210x_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ if (modem_ctl[0] & 0x0008) {
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ cflag |= CRTSCTS;
+ } else {
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ cflag &= ~CRTSCTS;
+ }
+
+ port->tty->termios->c_cflag = cflag;
+}
+
+static void cp210x_set_termios(struct usb_serial_port *port,
+ struct ktermios *old_termios)
+{
+ unsigned int cflag, old_cflag;
+ int baud = 0, bits;
+ unsigned int modem_ctl[4];
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (!port->tty || !port->tty->termios) {
+ dbg("%s - no tty structures", __FUNCTION__);
+ return;
+ }
+ port->tty->termios->c_cflag &= ~CMSPAR;
+
+ cflag = port->tty->termios->c_cflag;
+ old_cflag = old_termios->c_cflag;
+ baud = tty_get_baud_rate(port->tty);
+
+ /* If the baud rate is to be updated*/
+ if (baud != tty_termios_baud_rate(old_termios)) {
+ switch (baud) {
+ case 0:
+ case 600:
+ case 1200:
+ case 1800:
+ case 2400:
+ case 4800:
+ case 7200:
+ case 9600:
+ case 14400:
+ case 19200:
+ case 28800:
+ case 38400:
+ case 55854:
+ case 57600:
+ case 115200:
+ case 127117:
+ case 230400:
+ case 460800:
+ case 921600:
+ case 3686400:
+ break;
+ default:
+ baud = 9600;
+ break;
+ }
+
+ if (baud) {
+ dbg("%s - Setting baud rate to %d baud", __FUNCTION__,
+ baud);
+ if (cp210x_set_config_single(port, CP2101_BAUDRATE,
+ (BAUD_RATE_GEN_FREQ / baud))) {
+ dev_err(&port->dev, "Baud rate requested not "
+ "supported by device\n");
+ baud = tty_termios_baud_rate(old_termios);
+ }
+ }
+ }
+ /* Report back the resulting baud rate */
+ tty_encode_baud_rate(port->tty, baud, baud);
+
+ /* If the number of data bits is to be updated */
+ if ((cflag & CSIZE) != (old_cflag & CSIZE)) {
+ cp210x_get_config(port, CP2101_BITS, &bits, 2);
+ bits &= ~BITS_DATA_MASK;
+ switch (cflag & CSIZE) {
+ case CS5:
+ bits |= BITS_DATA_5;
+ dbg("%s - data bits = 5", __FUNCTION__);
+ break;
+ case CS6:
+ bits |= BITS_DATA_6;
+ dbg("%s - data bits = 6", __FUNCTION__);
+ break;
+ case CS7:
+ bits |= BITS_DATA_7;
+ dbg("%s - data bits = 7", __FUNCTION__);
+ break;
+ case CS8:
+ bits |= BITS_DATA_8;
+ dbg("%s - data bits = 8", __FUNCTION__);
+ break;
+ /*case CS9:
+ bits |= BITS_DATA_9;
+ dbg("%s - data bits = 9", __FUNCTION__);
+ break;*/
+ default:
+ dev_err(&port->dev, "cp210x driver does not "
+ "support the number of bits requested,"
+ " using 8 bit mode\n");
+ bits |= BITS_DATA_8;
+ break;
+ }
+ if (cp210x_set_config(port, CP2101_BITS, &bits, 2))
+ dev_err(&port->dev, "Number of data bits requested "
+ "not supported by device\n");
+ }
+
+ if ((cflag & (PARENB|PARODD)) != (old_cflag & (PARENB|PARODD))) {
+ cp210x_get_config(port, CP2101_BITS, &bits, 2);
+ bits &= ~BITS_PARITY_MASK;
+ if (cflag & PARENB) {
+ if (cflag & PARODD) {
+ bits |= BITS_PARITY_ODD;
+ dbg("%s - parity = ODD", __FUNCTION__);
+ } else {
+ bits |= BITS_PARITY_EVEN;
+ dbg("%s - parity = EVEN", __FUNCTION__);
+ }
+ }
+ if (cp210x_set_config(port, CP2101_BITS, &bits, 2))
+ dev_err(&port->dev, "Parity mode not supported "
+ "by device\n");
+ }
+
+ if ((cflag & CSTOPB) != (old_cflag & CSTOPB)) {
+ cp210x_get_config(port, CP2101_BITS, &bits, 2);
+ bits &= ~BITS_STOP_MASK;
+ if (cflag & CSTOPB) {
+ bits |= BITS_STOP_2;
+ dbg("%s - stop bits = 2", __FUNCTION__);
+ } else {
+ bits |= BITS_STOP_1;
+ dbg("%s - stop bits = 1", __FUNCTION__);
+ }
+ if (cp210x_set_config(port, CP2101_BITS, &bits, 2))
+ dev_err(&port->dev, "Number of stop bits requested "
+ "not supported by device\n");
+ }
+
+ if ((cflag & CRTSCTS) != (old_cflag & CRTSCTS)) {
+ cp210x_get_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ dbg("%s - read modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+
+ if (cflag & CRTSCTS) {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x09;
+ modem_ctl[1] = 0x80;
+ dbg("%s - flow control = CRTSCTS", __FUNCTION__);
+ } else {
+ modem_ctl[0] &= ~0x7B;
+ modem_ctl[0] |= 0x01;
+ modem_ctl[1] |= 0x40;
+ dbg("%s - flow control = NONE", __FUNCTION__);
+ }
+
+ dbg("%s - write modem controls = 0x%.4x 0x%.4x 0x%.4x 0x%.4x",
+ __FUNCTION__, modem_ctl[0], modem_ctl[1],
+ modem_ctl[2], modem_ctl[3]);
+ cp210x_set_config(port, CP2101_MODEMCTL, modem_ctl, 16);
+ }
+
+}
+
+static int cp210x_tiocmset(struct usb_serial_port *port, struct file *file,
+ unsigned int set, unsigned int clear)
+{
+ int control = 0;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ if (set & TIOCM_RTS) {
+ control |= CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (set & TIOCM_DTR) {
+ control |= CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+ if (clear & TIOCM_RTS) {
+ control &= ~CONTROL_RTS;
+ control |= CONTROL_WRITE_RTS;
+ }
+ if (clear & TIOCM_DTR) {
+ control &= ~CONTROL_DTR;
+ control |= CONTROL_WRITE_DTR;
+ }
+
+ dbg("%s - control = 0x%.4x", __FUNCTION__, control);
+
+ return cp210x_set_config(port, CP2101_CONTROL, &control, 2);
+
+}
+
+static int cp210x_tiocmget(struct usb_serial_port *port, struct file *file)
+{
+ int control, result;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+
+ cp210x_get_config(port, CP2101_CONTROL, &control, 1);
+
+ result = ((control & CONTROL_DTR) ? TIOCM_DTR : 0)
+ |((control & CONTROL_RTS) ? TIOCM_RTS : 0)
+ |((control & CONTROL_CTS) ? TIOCM_CTS : 0)
+ |((control & CONTROL_DSR) ? TIOCM_DSR : 0)
+ |((control & CONTROL_RING)? TIOCM_RI : 0)
+ |((control & CONTROL_DCD) ? TIOCM_CD : 0);
+
+ dbg("%s - control = 0x%.2x", __FUNCTION__, control);
+
+ return result;
+}
+
+static void cp210x_break_ctl(struct usb_serial_port *port, int break_state)
+{
+ int state;
+
+ dbg("%s - port %d", __FUNCTION__, port->number);
+ if (break_state == 0)
+ state = BREAK_OFF;
+ else
+ state = BREAK_ON;
+ dbg("%s - turning break %s", __FUNCTION__,
+ state==BREAK_OFF ? "off" : "on");
+ cp210x_set_config(port, CP2101_BREAK, &state, 2);
+}
+
+static int cp210x_startup(struct usb_serial *serial)
+{
+ /* CP2101 buffers behave strangely unless device is reset */
+ usb_reset_device(serial->dev);
+ return 0;
+}
+
+static void cp210x_shutdown(struct usb_serial *serial)
+{
+ int i;
+
+ dbg("%s", __FUNCTION__);
+
+ /* Stop reads and writes on all ports */
+ for (i = 0; i < serial->num_ports; ++i) {
+ cp210x_cleanup(serial->port[i]);
+ }
+}
+
+static int __init cp210x_init(void)
+{
+ int retval;
+
+ retval = usb_serial_register(&cp210x_device);
+ if (retval)
+ return retval; /* Failed to register */
+
+ retval = usb_register(&cp210x_driver);
+ if (retval) {
+ /* Failed to register */
+ usb_serial_deregister(&cp210x_device);
+ return retval;
+ }
+
+ /* Success */
+ info(DRIVER_DESC " " DRIVER_VERSION);
+ return 0;
+}
+
+static void __exit cp210x_exit(void)
+{
+ usb_deregister(&cp210x_driver);
+ usb_serial_deregister(&cp210x_device);
+}
+
+module_init(cp210x_init);
+module_exit(cp210x_exit);
+
+MODULE_DESCRIPTION(DRIVER_DESC);
+MODULE_VERSION(DRIVER_VERSION);
+MODULE_LICENSE("GPL");
+
+module_param(debug, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(debug, "Enable verbose debugging messages");