/* If SEC_LINK_ONCE is set, this bitfield describes how the linker
should handle duplicate sections. */
-#define SEC_LINK_DUPLICATES 0x40000
+#define SEC_LINK_DUPLICATES 0xc0000
/* This value for SEC_LINK_DUPLICATES means that duplicate
sections with the same name should simply be discarded. */
/* This value for SEC_LINK_DUPLICATES means that the linker
should warn if there are any duplicate sections, although
it should still only link one copy. */
-#define SEC_LINK_DUPLICATES_ONE_ONLY 0x80000
+#define SEC_LINK_DUPLICATES_ONE_ONLY 0x40000
/* This value for SEC_LINK_DUPLICATES means that the linker
should warn if any duplicate sections are a different size. */
-#define SEC_LINK_DUPLICATES_SAME_SIZE 0x100000
+#define SEC_LINK_DUPLICATES_SAME_SIZE 0x80000
/* This value for SEC_LINK_DUPLICATES means that the linker
should warn if any duplicate sections contain different
relocation or other arcane processing. It is skipped when
going through the first-pass output, trusting that someone
else up the line will take care of it later. */
-#define SEC_LINKER_CREATED 0x200000
+#define SEC_LINKER_CREATED 0x100000
/* This section should not be subject to garbage collection.
Also set to inform the linker that this section should not be
listed in the link map as discarded. */
-#define SEC_KEEP 0x400000
+#define SEC_KEEP 0x200000
/* This section contains "short" data, and should be placed
"near" the GP. */
-#define SEC_SMALL_DATA 0x800000
+#define SEC_SMALL_DATA 0x400000
/* Attempt to merge identical entities in the section.
Entity size is given in the entsize field. */
-#define SEC_MERGE 0x1000000
+#define SEC_MERGE 0x800000
/* If given with SEC_MERGE, entities to merge are zero terminated
strings where entsize specifies character size instead of fixed
size entries. */
-#define SEC_STRINGS 0x2000000
+#define SEC_STRINGS 0x1000000
/* This section contains data about section groups. */
-#define SEC_GROUP 0x4000000
+#define SEC_GROUP 0x2000000
/* The section is a COFF shared library section. This flag is
only for the linker. If this type of section appears in
might be cleaner to have some more general mechanism to
allow the back end to control what the linker does with
sections. */
-#define SEC_COFF_SHARED_LIBRARY 0x10000000
+#define SEC_COFF_SHARED_LIBRARY 0x4000000
/* This section contains data which may be shared with other
executables or shared objects. This is for COFF only. */
-#define SEC_COFF_SHARED 0x20000000
+#define SEC_COFF_SHARED 0x8000000
/* When a section with this flag is being linked, then if the size of
the input section is less than a page, it should not cross a page
boundary. If the size of the input section is one page or more,
it should be aligned on a page boundary. This is for TI
TMS320C54X only. */
-#define SEC_TIC54X_BLOCK 0x40000000
+#define SEC_TIC54X_BLOCK 0x10000000
/* Conditionally link this section; do not link if there are no
references found to any symbol in the section. This is for TI
TMS320C54X only. */
-#define SEC_TIC54X_CLINK 0x80000000
+#define SEC_TIC54X_CLINK 0x20000000
+
+ /* Indicate that section has the no read flag set. This happens
+ when memory read flag isn't set. */
+#define SEC_COFF_NOREAD 0x40000000
/* End of section flags. */
output sections that have an input section. */
unsigned int linker_has_input : 1;
- /* Mark flags used by some linker backends for garbage collection. */
+ /* Mark flag used by some linker backends for garbage collection. */
unsigned int gc_mark : 1;
- unsigned int gc_mark_from_eh : 1;
/* The following flags are used by the ELF linker. */
/* Nonzero if this section has TLS related relocations. */
unsigned int has_tls_reloc:1;
+ /* Nonzero if this section has a call to __tls_get_addr. */
+ unsigned int has_tls_get_addr_call:1;
+
/* Nonzero if this section has a gp reloc. */
unsigned int has_gp_reloc:1;
bfd_size_type size;
/* For input sections, the original size on disk of the section, in
- octets. This field is used by the linker relaxation code. It is
- currently only set for sections where the linker relaxation scheme
- doesn't cache altered section and reloc contents (stabs, eh_frame,
- SEC_MERGE, some coff relaxing targets), and thus the original size
- needs to be kept to read the section multiple times.
- For output sections, rawsize holds the section size calculated on
- a previous linker relaxation pass. */
+ octets. This field should be set for any section whose size is
+ changed by linker relaxation. It is required for sections where
+ the linker relaxation scheme doesn't cache altered section and
+ reloc contents (stabs, eh_frame, SEC_MERGE, some coff relaxing
+ targets), and thus the original size needs to be kept to read the
+ section multiple times. For output sections, rawsize holds the
+ section size calculated on a previous linker relaxation pass. */
bfd_size_type rawsize;
+ /* Relaxation table. */
+ struct relax_table *relax;
+
+ /* Count of used relaxation table entries. */
+ int relax_count;
+
+
/* If this section is going to be output, then this value is the
offset in *bytes* into the output section of the first byte in the
input section (byte ==> smallest addressable unit on the
@} map_head, map_tail;
@} asection;
+/* Relax table contains information about instructions which can
+ be removed by relaxation -- replacing a long address with a
+ short address. */
+struct relax_table @{
+ /* Address where bytes may be deleted. */
+ bfd_vma addr;
+
+ /* Number of bytes to be deleted. */
+ int size;
+@};
+
/* These sections are global, and are managed by BFD. The application
and target back end are not permitted to change the values in
these sections. New code should use the section_ptr macros rather
/* name, id, index, next, prev, flags, user_set_vma, */ \
@{ NAME, IDX, 0, NULL, NULL, FLAGS, 0, \
\
- /* linker_mark, linker_has_input, gc_mark, gc_mark_from_eh, */ \
- 0, 0, 1, 0, \
+ /* linker_mark, linker_has_input, gc_mark, */ \
+ 0, 0, 1, \
\
/* segment_mark, sec_info_type, use_rela_p, has_tls_reloc, */ \
0, 0, 0, 0, \
\
- /* has_gp_reloc, need_finalize_relax, reloc_done, */ \
- 0, 0, 0, \
+ /* has_tls_get_addr_call, has_gp_reloc, need_finalize_relax, */ \
+ 0, 0, 0, \
\
- /* vma, lma, size, rawsize */ \
- 0, 0, 0, 0, \
+ /* reloc_done, vma, lma, size, rawsize, relax, relax_count, */ \
+ 0, 0, 0, 0, 0, 0, 0, \
\
/* output_offset, output_section, alignment_power, */ \
0, (struct bfd_section *) &SEC, 0, \
projects / msp430-binutils.git / blobdiff