@c Copyright 1991, 1992, 1993, 1994, 1995, 1997, 1998, 1999, 2000,
-@c 2001, 2003, 2004
+@c 2001, 2003, 2004, 2005, 2006, 2007, 2008, 2009
@c Free Software Foundation, Inc.
@c This is part of the GAS manual.
@c For copying conditions, see the file as.texinfo.
@end ifclear
@cindex i386 support
-@cindex i80306 support
+@cindex i80386 support
@cindex x86-64 support
The i386 version @code{@value{AS}} supports both the original Intel 386
@menu
* i386-Options:: Options
+* i386-Directives:: X86 specific directives
* i386-Syntax:: AT&T Syntax versus Intel Syntax
* i386-Mnemonics:: Instruction Naming
* i386-Regs:: Register Naming
@cindex @samp{-march=} option, i386
@cindex @samp{-march=} option, x86-64
-@item -march=@var{CPU}
-This option specifies an instruction set architecture for generating
-instructions. The following architectures are recognized:
+@item -march=@var{CPU}[+@var{EXTENSION}@dots{}]
+This option specifies the target processor. The assembler will
+issue an error message if an attempt is made to assemble an instruction
+which will not execute on the target processor. The following
+processor names are recognized:
@code{i8086},
@code{i186},
@code{i286},
@code{nocona},
@code{core},
@code{core2},
+@code{corei7},
+@code{l1om},
@code{k6},
@code{k6_2},
@code{athlon},
-@code{sledgehammer},
@code{opteron},
@code{k8},
+@code{amdfam10},
@code{generic32} and
@code{generic64}.
-This option only affects instructions generated by the assembler. The
+In addition to the basic instruction set, the assembler can be told to
+accept various extension mnemonics. For example,
+@code{-march=i686+sse4+vmx} extends @var{i686} with @var{sse4} and
+@var{vmx}. The following extensions are currently supported:
+@code{8087},
+@code{287},
+@code{387},
+@code{no87},
+@code{mmx},
+@code{nommx},
+@code{sse},
+@code{sse2},
+@code{sse3},
+@code{ssse3},
+@code{sse4.1},
+@code{sse4.2},
+@code{sse4},
+@code{nosse},
+@code{avx},
+@code{noavx},
+@code{vmx},
+@code{smx},
+@code{xsave},
+@code{aes},
+@code{pclmul},
+@code{fma},
+@code{movbe},
+@code{ept},
+@code{clflush},
+@code{syscall},
+@code{rdtscp},
+@code{3dnow},
+@code{3dnowa},
+@code{sse4a},
+@code{sse5},
+@code{svme},
+@code{abm} and
+@code{padlock}.
+Note that rather than extending a basic instruction set, the extension
+mnemonics starting with @code{no} revoke the respective functionality.
+
+When the @code{.arch} directive is used with @option{-march}, the
@code{.arch} directive will take precedent.
@cindex @samp{-mtune=} option, i386
of the processor specified by the @option{-march} option will be
generated.
-Valid @var{CPU} values are identical to @option{-march=@var{CPU}}.
+Valid @var{CPU} values are identical to the processor list of
+@option{-march=@var{CPU}}.
+
+@cindex @samp{-msse2avx} option, i386
+@cindex @samp{-msse2avx} option, x86-64
+@item -msse2avx
+This option specifies that the assembler should encode SSE instructions
+with VEX prefix.
+
+@cindex @samp{-msse-check=} option, i386
+@cindex @samp{-msse-check=} option, x86-64
+@item -msse-check=@var{none}
+@item -msse-check=@var{warning}
+@item -msse-check=@var{error}
+These options control if the assembler should check SSE intructions.
+@option{-msse-check=@var{none}} will make the assembler not to check SSE
+instructions, which is the default. @option{-msse-check=@var{warning}}
+will make the assembler issue a warning for any SSE intruction.
+@option{-msse-check=@var{error}} will make the assembler issue an error
+for any SSE intruction.
+
+@cindex @samp{-mmnemonic=} option, i386
+@cindex @samp{-mmnemonic=} option, x86-64
+@item -mmnemonic=@var{att}
+@item -mmnemonic=@var{intel}
+This option specifies instruction mnemonic for matching instructions.
+The @code{.att_mnemonic} and @code{.intel_mnemonic} directives will
+take precedent.
+
+@cindex @samp{-msyntax=} option, i386
+@cindex @samp{-msyntax=} option, x86-64
+@item -msyntax=@var{att}
+@item -msyntax=@var{intel}
+This option specifies instruction syntax when processing instructions.
+The @code{.att_syntax} and @code{.intel_syntax} directives will
+take precedent.
+
+@cindex @samp{-mnaked-reg} option, i386
+@cindex @samp{-mnaked-reg} option, x86-64
+@item -mnaked-reg
+This opetion specifies that registers don't require a @samp{%} prefix.
+The @code{.att_syntax} and @code{.intel_syntax} directives will take precedent.
+
+@end table
+
+@node i386-Directives
+@section x86 specific Directives
+
+@cindex machine directives, x86
+@cindex x86 machine directives
+@table @code
+
+@cindex @code{lcomm} directive, COFF
+@item .lcomm @var{symbol} , @var{length}[, @var{alignment}]
+Reserve @var{length} (an absolute expression) bytes for a local common
+denoted by @var{symbol}. The section and value of @var{symbol} are
+those of the new local common. The addresses are allocated in the bss
+section, so that at run-time the bytes start off zeroed. Since
+@var{symbol} is not declared global, it is normally not visible to
+@code{@value{LD}}. The optional third parameter, @var{alignment},
+specifies the desired alignment of the symbol in the bss section.
+
+This directive is only available for COFF based x86 targets.
+
+@c FIXME: Document other x86 specific directives ? Eg: .code16gcc,
+@c .largecomm
@end table
AT&T and Intel syntax use the opposite order for source and destination
operands. Intel @samp{add eax, 4} is @samp{addl $4, %eax}. The
@samp{source, dest} convention is maintained for compatibility with
-previous Unix assemblers. Note that instructions with more than one
-source operand, such as the @samp{enter} instruction, do @emph{not} have
-reversed order. @ref{i386-Bugs}.
+previous Unix assemblers. Note that @samp{bound}, @samp{invlpga}, and
+instructions with 2 immediate operands, such as the @samp{enter}
+instruction, do @emph{not} have reversed order. @ref{i386-Bugs}.
@cindex mnemonic suffixes, i386
@cindex sizes operands, i386
@samp{wq} (from word to quadruple word), and @samp{lq} (from long to
quadruple word).
+@cindex encoding options, i386
+@cindex encoding options, x86-64
+
+Different encoding options can be specified via optional mnemonic
+suffix. @samp{.s} suffix swaps 2 register operands in encoding when
+moving from one register to another.
+
@cindex conversion instructions, i386
@cindex i386 conversion instructions
@cindex conversion instructions, x86-64
AT&T syntax, but are @samp{call far} and @samp{jump far} in Intel
convention.
+@section AT&T Mnemonic versus Intel Mnemonic
+
+@cindex i386 mnemonic compatibility
+@cindex mnemonic compatibility, i386
+
+@code{@value{AS}} supports assembly using Intel mnemonic.
+@code{.intel_mnemonic} selects Intel mnemonic with Intel syntax, and
+@code{.att_mnemonic} switches back to the usual AT&T mnemonic with AT&T
+syntax for compatibility with the output of @code{@value{GCC}}.
+Several x87 instructions, @samp{fadd}, @samp{fdiv}, @samp{fdivp},
+@samp{fdivr}, @samp{fdivrp}, @samp{fmul}, @samp{fsub}, @samp{fsubp},
+@samp{fsubr} and @samp{fsubrp}, are implemented in AT&T System V/386
+assembler with different mnemonics from those in Intel IA32 specification.
+@code{@value{GCC}} generates those instructions with AT&T mnemonic.
+
@node i386-Regs
@section Register Naming
@item @samp{i486} @tab @samp{i586} @tab @samp{i686} @tab @samp{pentium}
@item @samp{pentiumpro} @tab @samp{pentiumii} @tab @samp{pentiumiii} @tab @samp{pentium4}
@item @samp{prescott} @tab @samp{nocona} @tab @samp{core} @tab @samp{core2}
+@item @samp{corei7} @tab @samp{l1om}
+@item @samp{k6} @tab @samp{k6_2} @tab @samp{athlon} @tab @samp{k8}
@item @samp{amdfam10}
-@item @samp{k6} @tab @samp{athlon} @tab @samp{sledgehammer} @tab @samp{k8}
+@item @samp{generic32} @tab @samp{generic64}
@item @samp{.mmx} @tab @samp{.sse} @tab @samp{.sse2} @tab @samp{.sse3}
@item @samp{.ssse3} @tab @samp{.sse4.1} @tab @samp{.sse4.2} @tab @samp{.sse4}
-@item @samp{.sse4a} @tab @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.padlock}
-@item @samp{.pacifica} @tab @samp{.svme} @tab @samp{.abm}
+@item @samp{.avx} @tab @samp{.vmx} @tab @samp{.smx} @tab @samp{.xsave}
+@item @samp{.aes} @tab @samp{.pclmul} @tab @samp{.fma} @tab @samp{.movbe}
+@item @samp{.ept} @tab @samp{.clflush}
+@item @samp{.3dnow} @tab @samp{.3dnowa} @tab @samp{.sse4a} @tab @samp{.sse5}
+@item @samp{.syscall} @tab @samp{.rdtscp} @tab @samp{.svme} @tab @samp{.abm}
+@item @samp{.padlock}
@end multitable
Apart from the warning, there are only two other effects on