+++ /dev/null
-# This is the original manually generated Makefile. It may stil be used
-# to build the collector.
-#
-# Primary targets:
-# gc.a - builds basic library
-# c++ - adds C++ interface to library
-# cords - adds cords (heavyweight strings) to library
-# test - prints porting information, then builds basic version of gc.a,
-# and runs some tests of collector and cords. Does not add cords or
-# c++ interface to gc.a
-# cord/de - builds dumb editor based on cords.
-ABI_FLAG=
-CC=cc $(ABI_FLAG)
-CXX=g++ $(ABI_FLAG)
-AS=as $(ABI_FLAG)
-# The above doesn't work with gas, which doesn't run cpp.
-# Define AS as `gcc -c -x assembler-with-cpp' instead.
-# Under Irix 6, you will have to specify the ABI (-o32, -n32, or -64)
-# if you use something other than the default ABI on your machine.
-
-# Redefining srcdir allows object code for the nonPCR version of the collector
-# to be generated in different directories.
-srcdir= .
-VPATH= $(srcdir)
-
-CFLAGS= -O -I$(srcdir)/include -DATOMIC_UNCOLLECTABLE -DNO_SIGNALS -DNO_EXECUTE_PERMISSION -DSILENT -DALL_INTERIOR_POINTERS
-
-# To build the parallel collector on Linux, add to the above:
-# -DGC_LINUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
-# To build the parallel collector n a static library on HP/UX, add to the above:
-# -DGC_HPUX_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC -DUSE_HPUX_TLS -D_POSIX_C_SOURCE=199506L
-
-# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
-# part of the build process, i.e. on the build machine. These will usually
-# be the same as CC and CFLAGS, except in a cross-compilation environment.
-# Note that HOSTCFLAGS should include any -D flags that affect thread support.
-HOSTCC=$(CC)
-HOSTCFLAGS=$(CFLAGS)
-
-# For dynamic library builds, it may be necessary to add flags to generate
-# PIC code, e.g. -fPIC on Linux.
-
-# Setjmp_test may yield overly optimistic results when compiled
-# without optimization.
-
-# These define arguments influence the collector configuration:
-# -DSILENT disables statistics printing, and improves performance.
-# -DFIND_LEAK causes GC_find_leak to be initially set.
-# This causes the collector to assume that all inaccessible
-# objects should have been explicitly deallocated, and reports exceptions.
-# Finalization and the test program are not usable in this mode.
-# -DGC_SOLARIS_THREADS enables support for Solaris (thr_) threads.
-# (Clients should also define GC_SOLARIS_THREADS and then include
-# gc.h before performing thr_ or dl* or GC_ operations.)
-# Must also define -D_REENTRANT.
-# -DGC_SOLARIS_PTHREADS enables support for Solaris pthreads.
-# Define SOLARIS_THREADS as well.
-# -DGC_IRIX_THREADS enables support for Irix pthreads. See README.irix.
-# -DGC_HPUX_THREADS enables support for HP/UX 11 pthreads.
-# Also requires -D_REENTRANT or -D_POSIX_C_SOURCE=199506L. See README.hp.
-# -DGC_LINUX_THREADS enables support for Xavier Leroy's Linux threads.
-# see README.linux. -D_REENTRANT may also be required.
-# -DALL_INTERIOR_POINTERS allows all pointers to the interior
-# of objects to be recognized. (See gc_priv.h for consequences.)
-# Alternatively, GC_all_interior_pointers can be set at process
-# initialization time.
-# -DSMALL_CONFIG tries to tune the collector for small heap sizes,
-# usually causing it to use less space in such situations.
-# Incremental collection no longer works in this case.
-# -DLARGE_CONFIG tunes the collector for unusually large heaps.
-# Necessary for heaps larger than about 500 MB on most machines.
-# Recommended for heaps larger than about 64 MB.
-# -DDONT_ADD_BYTE_AT_END is meaningful only with -DALL_INTERIOR_POINTERS or
-# GC_all_interior_pointers = 1. Normally -DALL_INTERIOR_POINTERS
-# causes all objects to be padded so that pointers just past the end of
-# an object can be recognized. This can be expensive. (The padding
-# is normally more than one byte due to alignment constraints.)
-# -DDONT_ADD_BYTE_AT_END disables the padding.
-# -DNO_SIGNALS does not disable signals during critical parts of
-# the GC process. This is no less correct than many malloc
-# implementations, and it sometimes has a significant performance
-# impact. However, it is dangerous for many not-quite-ANSI C
-# programs that call things like printf in asynchronous signal handlers.
-# This is on by default. Turning it off has not been extensively tested with
-# compilers that reorder stores. It should have been.
-# -DNO_EXECUTE_PERMISSION may cause some or all of the heap to not
-# have execute permission, i.e. it may be impossible to execute
-# code from the heap. Currently this only affects the incremental
-# collector on UNIX machines. It may greatly improve its performance,
-# since this may avoid some expensive cache synchronization.
-# -DOPERATOR_NEW_ARRAY declares that the C++ compiler supports the
-# new syntax "operator new[]" for allocating and deleting arrays.
-# See gc_cpp.h for details. No effect on the C part of the collector.
-# This is defined implicitly in a few environments.
-# -DREDIRECT_MALLOC=X causes malloc, realloc, and free to be defined
-# as aliases for X, GC_realloc, and GC_free, respectively.
-# Calloc is redefined in terms of the new malloc. X should
-# be either GC_malloc or GC_malloc_uncollectable, or
-# GC_debug_malloc_replacement. (The latter invokes GC_debug_malloc
-# with dummy source location information, but still results in
-# properly remembered call stacks on Linux/X86 and Solaris/SPARC.)
-# The former is occasionally useful for working around leaks in code
-# you don't want to (or can't) look at. It may not work for
-# existing code, but it often does. Neither works on all platforms,
-# since some ports use malloc or calloc to obtain system memory.
-# (Probably works for UNIX, and win32.)
-# -DREDIRECT_REALLOC=X causes GC_realloc to be redirected to X.
-# The canonical use is -DREDIRECT_REALLOC=GC_debug_realloc_replacement,
-# together with -DREDIRECT_MALLOC=GC_debug_malloc_replacement to
-# generate leak reports with call stacks for both malloc and realloc.
-# -DIGNORE_FREE turns calls to free into a noop. Only useful with
-# -DREDIRECT_MALLOC.
-# -DNO_DEBUGGING removes GC_dump and the debugging routines it calls.
-# Reduces code size slightly at the expense of debuggability.
-# -DJAVA_FINALIZATION makes it somewhat safer to finalize objects out of
-# order by specifying a nonstandard finalization mark procedure (see
-# finalize.c). Objects reachable from finalizable objects will be marked
-# in a sepearte postpass, and hence their memory won't be reclaimed.
-# Not recommended unless you are implementing a language that specifies
-# these semantics. Since 5.0, determines only only the initial value
-# of GC_java_finalization variable.
-# -DFINALIZE_ON_DEMAND causes finalizers to be run only in response
-# to explicit GC_invoke_finalizers() calls.
-# In 5.0 this became runtime adjustable, and this only determines the
-# initial value of GC_finalize_on_demand.
-# -DATOMIC_UNCOLLECTABLE includes code for GC_malloc_atomic_uncollectable.
-# This is useful if either the vendor malloc implementation is poor,
-# or if REDIRECT_MALLOC is used.
-# -DHBLKSIZE=ddd, where ddd is a power of 2 between 512 and 16384, explicitly
-# sets the heap block size. Each heap block is devoted to a single size and
-# kind of object. For the incremental collector it makes sense to match
-# the most likely page size. Otherwise large values result in more
-# fragmentation, but generally better performance for large heaps.
-# -DUSE_MMAP use MMAP instead of sbrk to get new memory.
-# Works for Solaris and Irix.
-# -DUSE_MUNMAP causes memory to be returned to the OS under the right
-# circumstances. This currently disables VM-based incremental collection.
-# This is currently experimental, and works only under some Unix and
-# Linux versions.
-# -DMMAP_STACKS (for Solaris threads) Use mmap from /dev/zero rather than
-# GC_scratch_alloc() to get stack memory.
-# -DPRINT_BLACK_LIST Whenever a black list entry is added, i.e. whenever
-# the garbage collector detects a value that looks almost, but not quite,
-# like a pointer, print both the address containing the value, and the
-# value of the near-bogus-pointer. Can be used to identifiy regions of
-# memory that are likely to contribute misidentified pointers.
-# -DKEEP_BACK_PTRS Add code to save back pointers in debugging headers
-# for objects allocated with the debugging allocator. If all objects
-# through GC_MALLOC with GC_DEBUG defined, this allows the client
-# to determine how particular or randomly chosen objects are reachable
-# for debugging/profiling purposes. The gc_backptr.h interface is
-# implemented only if this is defined.
-# -DGC_ASSERTIONS Enable some internal GC assertion checking. Currently
-# this facility is only used in a few places. It is intended primarily
-# for debugging of the garbage collector itself, but could also
-# -DDBG_HDRS_ALL Make sure that all objects have debug headers. Increases
-# the reliability (from 99.9999% to 100%) of some of the debugging
-# code (especially KEEP_BACK_PTRS). Makes -DSHORT_DBG_HDRS possible.
-# Assumes that all client allocation is done through debugging
-# allocators.
-# -DSHORT_DBG_HDRS Assume that all objects have debug headers. Shorten
-# the headers to minimize object size, at the expense of checking for
-# writes past the end of an object. This is intended for environments
-# in which most client code is written in a "safe" language, such as
-# Scheme or Java. Assumes that all client allocation is done using
-# the GC_debug_ functions, or through the macros that expand to these,
-# or by redirecting malloc to GC_debug_malloc_replacement.
-# (Also eliminates the field for the requested object size.)
-# occasionally be useful for debugging of client code. Slows down the
-# collector somewhat, but not drastically.
-# -DSAVE_CALL_COUNT=<n> Set the number of call frames saved with objects
-# allocated through the debugging interface. Affects the amount of
-# information generated in leak reports. Only matters on platforms
-# on which we can quickly generate call stacks, currently Linux/(X86 & SPARC)
-# and Solaris/SPARC. Turns on call chain saving on X86. On X86, client
-# code should NOT be compiled with -fomit-frame-pointer.
-# -DCHECKSUMS reports on erroneously clear dirty bits, and unexpectedly
-# altered stubborn objects, at substantial performance cost.
-# Use only for debugging of the incremental collector.
-# -DGC_GCJ_SUPPORT includes support for gcj (and possibly other systems
-# that include a pointer to a type descriptor in each allocated object).
-# Building this way requires an ANSI C compiler.
-# -DUSE_I686_PREFETCH causes the collector to issue Pentium III style
-# prefetch instructions. No effect except on X86 Linux platforms.
-# Assumes a very recent gcc-compatible compiler and assembler.
-# (Gas prefetcht0 support was added around May 1999.)
-# Empirically the code appears to still run correctly on Pentium II
-# processors, though with no performance benefit. May not run on other
-# X86 processors? In some cases this improves performance by
-# 15% or so.
-# -DUSE_3DNOW_PREFETCH causes the collector to issue AMD 3DNow style
-# prefetch instructions. Same restrictions as USE_I686_PREFETCH.
-# UNTESTED!!
-# -DGC_USE_LD_WRAP in combination with the gld flags listed in README.linux
-# causes the collector some system and pthread calls in a more transparent
-# fashion than the usual macro-based approach. Requires GNU ld, and
-# currently probably works only with Linux.
-# -DTHREAD_LOCAL_ALLOC defines GC_local_malloc(), GC_local_malloc_atomic()
-# and GC_local_gcj_malloc(). Needed for gc_gcj.h interface. These allocate
-# in a way that usually does not involve acquisition of a global lock.
-# Currently requires -DGC_LINUX_THREADS, but should be easy to port to
-# other pthreads environments. Recommended for multiprocessors.
-# -DPARALLEL_MARK allows the marker to run in multiple threads. Recommended
-# for multiprocessors. Currently requires Linux on X86 or IA64, though
-# support for other Posix platforms should be fairly easy to add,
-# if the thread implementation is otherwise supported.
-# -DNO_GETENV prevents the collector from looking at environment variables.
-# These may otherwise alter its configuration, or turn off GC altogether.
-# I don't know of a reason to disable this, except possibly if the
-# resulting process runs as a privileged user?
-# -DSTUBBORN_ALLOC allows allocation of "hard to change" objects, and thus
-# makes incremental collection easier. Was enabled by default until 6.0.
-# Rarely used, to my knowledge.
-#
-
-CXXFLAGS= $(CFLAGS)
-AR= ar
-RANLIB= ranlib
-
-
-OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o malloc.o stubborn.o checksums.o solaris_threads.o irix_threads.o linux_threads.o typd_mlc.o ptr_chck.o mallocx.o solaris_pthreads.o gcj_mlc.o specific.o gc_dlopen.o
-
-CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c headers.c mark.c obj_map.c pcr_interface.c blacklst.c finalize.c new_hblk.c real_malloc.c dyn_load.c dbg_mlc.c malloc.c stubborn.c checksums.c solaris_threads.c irix_threads.c linux_threads.c typd_mlc.c ptr_chck.c mallocx.c solaris_pthreads.c gcj_mlc.c specific.c gc_dlopen.c
-
-CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/de.c cord/cordtest.c include/cord.h include/ec.h include/private/cord_pos.h cord/de_win.c cord/de_win.h cord/de_cmds.h cord/de_win.ICO cord/de_win.RC
-
-CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
-
-SRCS= $(CSRCS) mips_sgi_mach_dep.s rs6000_mach_dep.s alpha_mach_dep.s \
- sparc_mach_dep.s include/gc.h include/gc_typed.h \
- include/private/gc_hdrs.h include/private/gc_priv.h \
- include/private/gcconfig.h include/private/gc_pmark.h \
- include/gc_inl.h include/gc_inline.h include/gc_mark.h \
- threadlibs.c if_mach.c if_not_there.c gc_cpp.cc include/gc_cpp.h \
- include/weakpointer.h include/private/gc_locks.h \
- gcc_support.c mips_ultrix_mach_dep.s include/gc_alloc.h \
- include/new_gc_alloc.h include/javaxfc.h sparc_sunos4_mach_dep.s \
- sparc_netbsd_mach_dep.s \
- include/private/solaris_threads.h include/gc_backptr.h \
- hpux_test_and_clear.s include/gc_gcj.h \
- include/gc_local_alloc.h include/private/dbg_mlc.h \
- include/private/specific.h powerpc_macosx_mach_dep.s \
- include/leak_detector.h include/gc_amiga_redirects.h \
- include/gc_pthread_redirects.h $(CORD_SRCS)
-
-DOC_FILES= README.QUICK doc/README.Mac doc/README.MacOSX doc/README.OS2 \
- doc/README.amiga doc/README.cords doc/README.debugging \
- doc/README.dj doc/README.hp doc/README.linux doc/README.rs6000 \
- doc/README.sgi doc/README.solaris2 doc/README.uts \
- doc/README.win32 doc/barrett_diagram doc/README \
- doc/README.contributors doc/README.changes doc/gc.man \
- doc/README.environment
-
-TESTS= tests/test.c tests/test_cpp.cc tests/trace_test.c \
- tests/leak_test.c tests/thread_leak_test.c
-OTHER_FILES= Makefile PCR-Makefile OS2_MAKEFILE NT_MAKEFILE BCC_MAKEFILE \
- setjmp_t.c SMakefile.amiga configure.in Makefile.am \
- callprocs pc_excludes \
- MacProjects.sit.hqx MacOS.c EMX_MAKEFILE \
- Mac_files/datastart.c Mac_files/dataend.c \
- Mac_files/MacOS_config.h Mac_files/MacOS_Test_config.h \
- add_gc_prefix.c gc_cpp.cpp \
- win32_threads.c NT_THREADS_MAKEFILE gc.mak Makefile.dj \
- version.h Makefile.DLLs WCC_MAKEFILE AmigaOS.c $(TESTS)
-
-CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
- $(srcdir)/include/ec.h $(srcdir)/include/private/cord_pos.h
-
-UTILS= if_mach if_not_there threadlibs
-
-# Libraries needed for curses applications. Only needed for de.
-CURSES= -lcurses -ltermlib
-
-# The following is irrelevant on most systems. But a few
-# versions of make otherwise fork the shell specified in
-# the SHELL environment variable.
-SHELL= /bin/sh
-
-SPECIALCFLAGS = -I$(srcdir)/include
-# Alternative flags to the C compiler for mach_dep.c.
-# Mach_dep.c often doesn't like optimization, and it's
-# not time-critical anyway.
-# Set SPECIALCFLAGS to -q nodirect_code on Encore.
-
-all: gc.a gctest
-
-BSD-pkg-all: bsd-libgc.a
-
-bsd-libgc.a:
- $(MAKE) CFLAGS="$(CFLAGS)" clean c++-t
- mv gc.a bsd-libgc.a
-
-BSD-pkg-install: BSD-pkg-all
- ${CP} bsd-libgc.a libgc.a
- ${INSTALL_DATA} libgc.a ${PREFIX}/lib
- ${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
-
-pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
-include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
-mach_dep.o $(SRCS)
- $(MAKE) -f PCR-Makefile depend
- $(MAKE) -f PCR-Makefile
-
-$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
- $(srcdir)/include/private/gc_priv.h \
- $(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
- $(srcdir)/include/gc.h \
- $(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
- Makefile
-# The dependency on Makefile is needed. Changing
-# options such as -DSILENT affects the size of GC_arrays,
-# invalidating all .o files that rely on gc_priv.h
-
-mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h $(srcdir)/include/private/gc_pmark.h
-
-specific.o linux_threads.o: $(srcdir)/include/private/specific.h
-
-solaris_threads.o solaris_pthreads.o: $(srcdir)/include/private/solaris_threads.h
-
-dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
-
-tests/test.o: tests $(srcdir)/tests/test.c
- $(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
- mv test.o tests/test.o
-
-tests:
- mkdir tests
-
-base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
- echo > base_lib
- rm -f dont_ar_1
- ./if_mach SPARC SUNOS5 touch dont_ar_1
- ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(OBJS) dyn_load.o
- ./if_mach M68K AMIGA touch dont_ar_1
- ./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
- ./if_not_there dont_ar_1 $(AR) ru gc.a $(OBJS) dyn_load.o
- ./if_not_there dont_ar_1 $(RANLIB) gc.a || cat /dev/null
-# ignore ranlib failure; that usually means it doesn't exist, and isn't needed
-
-cords: $(CORD_OBJS) cord/cordtest $(UTILS)
- rm -f dont_ar_3
- ./if_mach SPARC SUNOS5 touch dont_ar_3
- ./if_mach SPARC SUNOS5 $(AR) rus gc.a $(CORD_OBJS)
- ./if_mach M68K AMIGA touch dont_ar_3
- ./if_mach M68K AMIGA $(AR) -vrus gc.a $(CORD_OBJS)
- ./if_not_there dont_ar_3 $(AR) ru gc.a $(CORD_OBJS)
- ./if_not_there dont_ar_3 $(RANLIB) gc.a || cat /dev/null
-
-gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h Makefile
- $(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
-
-test_cpp: $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h gc_cpp.o $(srcdir)/include/gc.h \
-base_lib $(UTILS)
- rm -f test_cpp
- ./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a -ldld `./threadlibs`
- ./if_not_there test_cpp $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc_cpp.o gc.a `./threadlibs`
-
-c++-t: c++
- ./test_cpp 1
-
-c++-nt: c++
- @echo "Use ./test_cpp 1 to test the leak library"
-
-c++: gc_cpp.o $(srcdir)/include/gc_cpp.h test_cpp
- rm -f dont_ar_4
- ./if_mach SPARC SUNOS5 touch dont_ar_4
- ./if_mach SPARC SUNOS5 $(AR) rus gc.a gc_cpp.o
- ./if_mach M68K AMIGA touch dont_ar_4
- ./if_mach M68K AMIGA $(AR) -vrus gc.a gc_cpp.o
- ./if_not_there dont_ar_4 $(AR) ru gc.a gc_cpp.o
- ./if_not_there dont_ar_4 $(RANLIB) gc.a || cat /dev/null
- ./test_cpp 1
- echo > c++
-
-dyn_load_sunos53.o: dyn_load.c
- $(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
-
-# SunOS5 shared library version of the collector
-sunos5gc.so: $(OBJS) dyn_load_sunos53.o
- $(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
- ln sunos5gc.so libgc.so
-
-# Alpha/OSF shared library version of the collector
-libalphagc.so: $(OBJS)
- ld -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
- ln libalphagc.so libgc.so
-
-# IRIX shared library version of the collector
-libirixgc.so: $(OBJS) dyn_load.o
- ld -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
- ln libirixgc.so libgc.so
-
-# Linux shared library version of the collector
-liblinuxgc.so: $(OBJS) dyn_load.o
- gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
- ln liblinuxgc.so libgc.so
-
-# Alternative Linux rule. This is preferable, but is likely to break the
-# Makefile for some non-linux platforms.
-# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
-#
-#.SUFFIXES: .lo $(SUFFIXES)
-#
-#.c.lo:
-# $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
-#
-# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
-# gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
-# touch liblinuxgc.so
-
-mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/mips_sgi_mach_dep.s $(srcdir)/mips_ultrix_mach_dep.s \
- $(srcdir)/rs6000_mach_dep.s $(srcdir)/powerpc_macosx_mach_dep.s $(UTILS)
- rm -f mach_dep.o
- ./if_mach MIPS IRIX5 $(AS) -o mach_dep.o $(srcdir)/mips_sgi_mach_dep.s
- ./if_mach MIPS RISCOS $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
- ./if_mach MIPS ULTRIX $(AS) -o mach_dep.o $(srcdir)/mips_ultrix_mach_dep.s
- ./if_mach RS6000 "" $(AS) -o mach_dep.o $(srcdir)/rs6000_mach_dep.s
- ./if_mach POWERPC MACOSX $(AS) -o mach_dep.o $(srcdir)/powerpc_macosx_mach_dep.s
-# ./if_mach ALPHA "" $(AS) -o mach_dep.o $(srcdir)/alpha_mach_dep.s
-# alpha_mach_dep.s assumes that pointers are not saved in fp registers.
-# Gcc on a 21264 can spill pointers to fp registers. Oops.
- ./if_mach SPARC SUNOS5 $(AS) -o mach_dep.o $(srcdir)/sparc_mach_dep.s
- ./if_mach SPARC SUNOS4 $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
- ./if_mach SPARC OPENBSD $(AS) -o mach_dep.o $(srcdir)/sparc_sunos4_mach_dep.s
- ./if_mach SPARC NETBSD $(AS) -o mach_dep.o $(srcdir)/sparc_netbsd_mach_dep.s
- ./if_not_there mach_dep.o $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-
-mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
- rm -f mark_rts.o
- -./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
- ./if_not_there mark_rts.o $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
-# Work-around for DEC optimizer tail recursion elimination bug.
-# The ALPHA-specific line should be removed if gcc is used.
-
-alloc.o: version.h
-
-cord:
- mkdir cord
-
-cord/cordbscs.o: cord $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
- $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
- mv cordbscs.o cord/cordbscs.o
-# not all compilers understand -o filename
-
-cord/cordxtra.o: cord $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
- $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
- mv cordxtra.o cord/cordxtra.o
-
-cord/cordprnt.o: cord $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
- $(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
- mv cordprnt.o cord/cordprnt.o
-
-cord/cordtest: $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a $(UTILS)
- rm -f cord/cordtest
- ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -lucb
- ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a -ldld `./threadlibs`
- ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
- ./if_not_there cord/cordtest $(CC) $(CFLAGS) -o cord/cordtest $(srcdir)/cord/cordtest.c $(CORD_OBJS) gc.a `./threadlibs`
-
-cord/de: $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(UTILS)
- rm -f cord/de
- ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -lucb `./threadlibs`
- ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) -ldld `./threadlibs`
- ./if_mach RS6000 "" $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
- ./if_mach POWERPC MACOSX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a
- ./if_mach I386 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
- ./if_mach ALPHA LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
- ./if_mach IA64 LINUX $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses `./threadlibs`
- ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a -lcurses
- ./if_not_there cord/de $(CC) $(CFLAGS) -o cord/de $(srcdir)/cord/de.c cord/cordbscs.o cord/cordxtra.o gc.a $(CURSES) `./threadlibs`
-
-if_mach: $(srcdir)/if_mach.c $(srcdir)/include/private/gcconfig.h
- $(HOSTCC) $(HOSTCFLAGS) -o if_mach $(srcdir)/if_mach.c
-
-threadlibs: $(srcdir)/threadlibs.c $(srcdir)/include/private/gcconfig.h Makefile
- $(HOSTCC) $(HOSTCFLAGS) -o threadlibs $(srcdir)/threadlibs.c
-
-if_not_there: $(srcdir)/if_not_there.c
- $(HOSTCC) $(HOSTCFLAGS) -o if_not_there $(srcdir)/if_not_there.c
-
-clean:
- rm -f gc.a *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
- setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
- threadlibs $(CORD_OBJS) cord/cordtest cord/de
- -rm -f *~
-
-gctest: tests/test.o gc.a $(UTILS)
- rm -f gctest
- ./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
- ./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
- ./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
- ./if_not_there gctest $(CC) $(CFLAGS) -o gctest tests/test.o gc.a `./threadlibs`
-
-# If an optimized setjmp_test generates a segmentation fault,
-# odds are your compiler is broken. Gctest may still work.
-# Try compiling setjmp_t.c unoptimized.
-setjmp_test: $(srcdir)/setjmp_t.c $(srcdir)/include/gc.h $(UTILS)
- $(CC) $(CFLAGS) -o setjmp_test $(srcdir)/setjmp_t.c
-
-test: KandRtest cord/cordtest
- cord/cordtest
-
-# Those tests that work even with a K&R C compiler:
-KandRtest: setjmp_test gctest
- ./setjmp_test
- ./gctest
-
-add_gc_prefix: add_gc_prefix.c
- $(CC) -o add_gc_prefix $(srcdir)/add_gc_prefix.c
-
-gc.tar: $(SRCS) $(DOC_FILES) $(OTHER_FILES) add_gc_prefix
- ./add_gc_prefix $(SRCS) $(DOC_FILES) $(OTHER_FILES) > /tmp/gc.tar-files
- tar cvfh gc.tar `cat /tmp/gc.tar-files`
-
-pc_gc.tar: $(SRCS) $(OTHER_FILES)
- tar cvfX pc_gc.tar pc_excludes $(SRCS) $(OTHER_FILES)
-
-floppy: pc_gc.tar
- -mmd a:/cord
- -mmd a:/cord/private
- -mmd a:/include
- -mmd a:/include/private
- mkdir /tmp/pc_gc
- cat pc_gc.tar | (cd /tmp/pc_gc; tar xvf -)
- -mcopy -tmn /tmp/pc_gc/* a:
- -mcopy -tmn /tmp/pc_gc/cord/* a:/cord
- -mcopy -mn /tmp/pc_gc/cord/de_win.ICO a:/cord
- -mcopy -tmn /tmp/pc_gc/cord/private/* a:/cord/private
- -mcopy -tmn /tmp/pc_gc/include/* a:/include
- -mcopy -tmn /tmp/pc_gc/include/private/* a:/include/private
- rm -r /tmp/pc_gc
-
-gc.tar.Z: gc.tar
- compress gc.tar
-
-gc.tar.gz: gc.tar
- gzip gc.tar
-
-lint: $(CSRCS) tests/test.c
- lint -DLINT $(CSRCS) tests/test.c | egrep -v "possible pointer alignment problem|abort|exit|sbrk|mprotect|syscall|change in ANSI|improper alignment"
-
-# BTL: added to test shared library version of collector.
-# Currently works only under SunOS5. Requires GC_INIT call from statically
-# loaded client code.
-ABSDIR = `pwd`
-gctest_dyn_link: tests/test.o libgc.so
- $(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
-
-gctest_irix_dyn_link: tests/test.o libirixgc.so
- $(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
-
-# The following appear to be dead, especially since libgc_globals.h
-# is apparently lost.
-test_dll.o: tests/test.c libgc_globals.h
- $(CC) $(CFLAGS) -DGC_USE_DLL -c tests/test.c -o test_dll.o
-
-test_dll: test_dll.o libgc_dll.a libgc.dll
- $(CC) test_dll.o -L$(ABSDIR) -lgc_dll -o test_dll
-
-SYM_PREFIX-libgc=GC
-
-# Uncomment the following line to build a GNU win32 DLL
-# include Makefile.DLLs
-
-reserved_namespace: $(SRCS)
- for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
- sed s/GC_/_GC_/g < $$file > tmp; \
- cp tmp $$file; \
- done
-
-user_namespace: $(SRCS)
- for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
- sed s/_GC_/GC_/g < $$file > tmp; \
- cp tmp $$file; \
- done
projects / msp430-gcc.git / blobdiff