+++ /dev/null
-------------------------------------------------------------------------------
--- --
--- GNAT COMPILER COMPONENTS --
--- --
--- T Y P E S --
--- --
--- S p e c --
--- --
--- $Revision: 1.5.10.1 $
--- --
--- Copyright (C) 1992-2001 Free Software Foundation, Inc. --
--- --
--- GNAT is free software; you can redistribute it and/or modify it under --
--- terms of the GNU General Public License as published by the Free Soft- --
--- ware Foundation; either version 2, or (at your option) any later ver- --
--- sion. GNAT is distributed in the hope that it will be useful, but WITH- --
--- OUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY --
--- or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License --
--- for more details. You should have received a copy of the GNU General --
--- Public License distributed with GNAT; see file COPYING. If not, write --
--- to the Free Software Foundation, 59 Temple Place - Suite 330, Boston, --
--- MA 02111-1307, USA. --
--- --
--- As a special exception, if other files instantiate generics from this --
--- unit, or you link this unit with other files to produce an executable, --
--- this unit does not by itself cause the resulting executable to be --
--- covered by the GNU General Public License. This exception does not --
--- however invalidate any other reasons why the executable file might be --
--- covered by the GNU Public License. --
--- --
--- GNAT was originally developed by the GNAT team at New York University. --
--- Extensive contributions were provided by Ada Core Technologies Inc. --
--- --
-------------------------------------------------------------------------------
-
-with Unchecked_Deallocation;
-
-package Types is
-pragma Preelaborate (Types);
-
--- This package contains host independent type definitions which are used
--- in more than one unit in the compiler. They are gathered here for easy
--- reference, though in some cases the full description is found in the
--- relevant module which implements the definition. The main reason that
--- they are not in their "natural" specs is that this would cause a lot of
--- inter-spec dependencies, and in particular some awkward circular
--- dependencies would have to be dealt with.
-
--- WARNING: There is a C version of this package. Any changes to this
--- source file must be properly reflected in the C header file a-types.h
-
--- Note: the declarations in this package reflect an expectation that the
--- host machine has an efficient integer base type with a range at least
--- 32 bits 2s-complement. If there are any machines for which this is not
--- a correct assumption, a significant number of changes will be required!
-
- -------------------------------
- -- General Use Integer Types --
- -------------------------------
-
- type Int is range -2 ** 31 .. +2 ** 31 - 1;
- -- Signed 32-bit integer
-
- type Dint is range -2 ** 63 .. +2 ** 63 - 1;
- -- Double length (64-bit) integer
-
- subtype Nat is Int range 0 .. Int'Last;
- -- Non-negative Int values
-
- subtype Pos is Int range 1 .. Int'Last;
- -- Positive Int values
-
- type Word is mod 2 ** 32;
- -- Unsigned 32-bit integer
-
- type Short is range -32768 .. +32767;
- for Short'Size use 16;
- -- 16-bit signed integer
-
- type Byte is mod 2 ** 8;
- for Byte'Size use 8;
- -- 8-bit unsigned integer
-
- type size_t is mod 2 ** Standard'Address_Size;
- -- Memory size value, for use in calls to C routines
-
- --------------------------------------
- -- 8-Bit Character and String Types --
- --------------------------------------
-
- -- We use Standard.Character and Standard.String freely, since we are
- -- compiling ourselves, and we properly implement the required 8-bit
- -- character code as required in Ada 95. This section defines a few
- -- general use constants and subtypes.
-
- EOF : constant Character := ASCII.SUB;
- -- The character SUB (16#1A#) is used in DOS and other systems derived
- -- from DOS (OS/2, NT etc) to signal the end of a text file. Internally
- -- all source files are ended by an EOF character, even on Unix systems.
- -- An EOF character acts as the end of file only as the last character
- -- of a source buffer, in any other position, it is treated as a blank
- -- if it appears between tokens, and as an illegal character otherwise.
- -- This makes life easier dealing with files that originated from DOS,
- -- including concatenated files with interspersed EOF characters.
-
- subtype Graphic_Character is Character range ' ' .. '~';
- -- Graphic characters, as defined in ARM
-
- subtype Line_Terminator is Character range ASCII.LF .. ASCII.CR;
- -- Line terminator characters (LF, VT, FF, CR)
-
- subtype Upper_Half_Character is
- Character range Character'Val (16#80#) .. Character'Val (16#FF#);
- -- Characters with the upper bit set
-
- type Character_Ptr is access all Character;
- type String_Ptr is access all String;
- -- Standard character and string pointers
-
- procedure Free is new Unchecked_Deallocation (String, String_Ptr);
- -- Procedure for freeing dynamically allocated String values
-
- subtype Word_Hex_String is String (1 .. 8);
- -- Type used to represent Word value as 8 hex digits, with lower case
- -- letters for the alphabetic cases.
-
- function Get_Hex_String (W : Word) return Word_Hex_String;
- -- Convert word value to 8-character hex string
-
- -----------------------------------------
- -- Types Used for Text Buffer Handling --
- -----------------------------------------
-
- -- We can't use type String for text buffers, since we must use the
- -- standard 32-bit integer as an index value, since we count on all
- -- index values being the same size.
-
- type Text_Ptr is new Int;
- -- Type used for subscripts in text buffer
-
- type Text_Buffer is array (Text_Ptr range <>) of Character;
- -- Text buffer used to hold source file or library information file
-
- type Text_Buffer_Ptr is access all Text_Buffer;
- -- Text buffers for input files are allocated dynamically and this type
- -- is used to reference these text buffers.
-
- procedure Free is new Unchecked_Deallocation (Text_Buffer, Text_Buffer_Ptr);
- -- Procedure for freeing dynamically allocated text buffers
-
- ------------------------------------------
- -- Types Used for Source Input Handling --
- ------------------------------------------
-
- type Logical_Line_Number is range 0 .. Int'Last;
- for Logical_Line_Number'Size use 32;
- -- Line number type, used for storing logical line numbers (i.e. line
- -- numbers that include effects of any Source_Reference pragmas in the
- -- source file). The value zero indicates a line containing a source
- -- reference pragma.
-
- No_Line_Number : constant Logical_Line_Number := 0;
- -- Special value used to indicate no line number
-
- type Physical_Line_Number is range 1 .. Int'Last;
- for Physical_Line_Number'Size use 32;
- -- Line number type, used for storing physical line numbers (i.e.
- -- line numbers in the physical file being compiled, unaffected by
- -- the presence of source reference pragmas.
-
- type Column_Number is range 0 .. 32767;
- for Column_Number'Size use 16;
- -- Column number (assume that 2**15 is large enough, see declaration
- -- of Hostparm.Max_Line_Length)
-
- No_Column_Number : constant Column_Number := 0;
- -- Special value used to indicate no column number
-
- subtype Source_Buffer is Text_Buffer;
- -- Type used to store text of a source file . The buffer for the main
- -- source (the source specified on the command line) has a lower bound
- -- starting at zero. Subsequent subsidiary sources have lower bounds
- -- which are one greater than the previous upper bound.
-
- subtype Big_Source_Buffer is Text_Buffer (0 .. Text_Ptr'Last);
- -- This is a virtual type used as the designated type of the access
- -- type Source_Buffer_Ptr, see Osint.Read_Source_File for details.
-
- type Source_Buffer_Ptr is access all Big_Source_Buffer;
- -- Pointer to source buffer. We use virtual origin addressing for
- -- source buffers, with thin pointers. The pointer points to a virtual
- -- instance of type Big_Source_Buffer, where the actual type is in fact
- -- of type Source_Buffer. The address is adjusted so that the virtual
- -- origin addressing works correctly. See Osint.Read_Source_Buffer for
- -- further details.
-
- subtype Source_Ptr is Text_Ptr;
- -- Type used to represent a source location, which is a subscript of a
- -- character in the source buffer. As noted above, diffferent source
- -- buffers have different ranges, so it is possible to tell from a
- -- Source_Ptr value which source it refers to. Note that negative numbers
- -- are allowed to accommodate the following special values.
-
- No_Location : constant Source_Ptr := -1;
- -- Value used to indicate no source position set in a node
-
- Standard_Location : constant Source_Ptr := -2;
- -- Used for all nodes in the representation of package Standard other
- -- than nodes representing the contents of Standard.ASCII. Note that
- -- testing for <= Standard_Location tests for both Standard_Location
- -- and for Standard_ASCII_Location.
-
- Standard_ASCII_Location : constant Source_Ptr := -3;
- -- Used for all nodes in the presentation of package Standard.ASCII
-
- First_Source_Ptr : constant Source_Ptr := 0;
- -- Starting source pointer index value for first source program
-
- -------------------------------------
- -- Range Definitions for Tree Data --
- -------------------------------------
-
- -- The tree has fields that can hold any of the following types:
-
- -- Pointers to other tree nodes (type Node_Id)
- -- List pointers (type List_Id)
- -- Element list pointers (type Elist_Id)
- -- Names (type Name_Id)
- -- Strings (type String_Id)
- -- Universal integers (type Uint)
- -- Universal reals (type Ureal)
- -- Character codes (type Char_Code stored with a bias)
-
- -- In most contexts, the strongly typed interface determines which of
- -- these types is present. However, there are some situations (involving
- -- untyped traversals of the tree), where it is convenient to be easily
- -- able to distinguish these values. The underlying representation in all
- -- cases is an integer type Union_Id, and we ensure that the range of
- -- the various possible values for each of the above types is disjoint
- -- so that this distinction is possible.
-
- type Union_Id is new Int;
- -- The type in the tree for a union of possible ID values
-
- -- Note: it is also helpful for debugging purposes to make these ranges
- -- distinct. If a bug leads to misidentification of a value, then it will
- -- typically result in an out of range value and a Constraint_Error.
-
- List_Low_Bound : constant := -100_000_000;
- -- The List_Id values are subscripts into an array of list headers which
- -- has List_Low_Bound as its lower bound. This value is chosen so that all
- -- List_Id values are negative, and the value zero is in the range of both
- -- List_Id and Node_Id values (see further description below).
-
- List_High_Bound : constant := 0;
- -- Maximum List_Id subscript value. This allows up to 100 million list
- -- Id values, which is in practice infinite, and there is no need to
- -- check the range. The range overlaps the node range by one element
- -- (with value zero), which is used both for the Empty node, and for
- -- indicating no list. The fact that the same value is used is convenient
- -- because it means that the default value of Empty applies to both nodes
- -- and lists, and also is more efficient to test for.
-
- Node_Low_Bound : constant := 0;
- -- The tree Id values start at zero, because we use zero for Empty (to
- -- allow a zero test for Empty). Actual tree node subscripts start at 0
- -- since Empty is a legitimate node value.
-
- Node_High_Bound : constant := 099_999_999;
- -- Maximum number of nodes that can be allocated is 100 million, which
- -- is in practice infinite, and there is no need to check the range.
-
- Elist_Low_Bound : constant := 100_000_000;
- -- The Elist_Id values are subscripts into an array of elist headers which
- -- has Elist_Low_Bound as its lower bound.
-
- Elist_High_Bound : constant := 199_999_999;
- -- Maximum Elist_Id subscript value. This allows up to 100 million Elists,
- -- which is in practice infinite and there is no need to check the range.
-
- Elmt_Low_Bound : constant := 200_000_000;
- -- Low bound of element Id values. The use of these values is internal to
- -- the Elists package, but the definition of the range is included here
- -- since it must be disjoint from other Id values. The Elmt_Id values are
- -- subscripts into an array of list elements which has this as lower bound.
-
- Elmt_High_Bound : constant := 299_999_999;
- -- Upper bound of Elmt_Id values. This allows up to 100 million element
- -- list members, which is in practice infinite (no range check needed).
-
- Names_Low_Bound : constant := 300_000_000;
- -- Low bound for name Id values
-
- Names_High_Bound : constant := 399_999_999;
- -- Maximum number of names that can be allocated is 100 million, which is
- -- in practice infinite and there is no need to check the range.
-
- Strings_Low_Bound : constant := 400_000_000;
- -- Low bound for string Id values
-
- Strings_High_Bound : constant := 499_999_999;
- -- Maximum number of strings that can be allocated is 100 million, which
- -- is in practice infinite and there is no need to check the range.
-
- Ureal_Low_Bound : constant := 500_000_000;
- -- Low bound for Ureal values.
-
- Ureal_High_Bound : constant := 599_999_999;
- -- Maximum number of Ureal values stored is 100_000_000 which is in
- -- practice infinite so that no check is required.
-
- Uint_Low_Bound : constant := 600_000_000;
- -- Low bound for Uint values.
-
- Uint_Table_Start : constant := 2_000_000_000;
- -- Location where table entries for universal integers start (see
- -- Uintp spec for details of the representation of Uint values).
-
- Uint_High_Bound : constant := 2_099_999_999;
- -- The range of Uint values is very large, since a substantial part
- -- of this range is used to store direct values, see Uintp for details.
-
- Char_Code_Bias : constant := 2_100_000_000;
- -- A bias value added to character code values stored in the tree which
- -- ensures that they have different values from any of the above types.
-
- -- The following subtype definitions are used to provide convenient names
- -- for membership tests on Int values to see what data type range they
- -- lie in. Such tests appear only in the lowest level packages.
-
- subtype List_Range is Union_Id
- range List_Low_Bound .. List_High_Bound;
-
- subtype Node_Range is Union_Id
- range Node_Low_Bound .. Node_High_Bound;
-
- subtype Elist_Range is Union_Id
- range Elist_Low_Bound .. Elist_High_Bound;
-
- subtype Elmt_Range is Union_Id
- range Elmt_Low_Bound .. Elmt_High_Bound;
-
- subtype Names_Range is Union_Id
- range Names_Low_Bound .. Names_High_Bound;
-
- subtype Strings_Range is Union_Id
- range Strings_Low_Bound .. Strings_High_Bound;
-
- subtype Uint_Range is Union_Id
- range Uint_Low_Bound .. Uint_High_Bound;
-
- subtype Ureal_Range is Union_Id
- range Ureal_Low_Bound .. Ureal_High_Bound;
-
- subtype Char_Code_Range is Union_Id
- range Char_Code_Bias .. Char_Code_Bias + 2**16 - 1;
-
- -----------------------------
- -- Types for Namet Package --
- -----------------------------
-
- -- Name_Id values are used to identify entries in the names table. Except
- -- for the special values No_Name, and Error_Name, they are subscript
- -- values for the Names table defined in package Namet.
-
- -- Note that with only a few exceptions, which are clearly documented, the
- -- type Name_Id should be regarded as a private type. In particular it is
- -- never appropriate to perform arithmetic operations using this type.
-
- type Name_Id is range Names_Low_Bound .. Names_High_Bound;
- for Name_Id'Size use 32;
- -- Type used to identify entries in the names table
-
- No_Name : constant Name_Id := Names_Low_Bound;
- -- The special Name_Id value No_Name is used in the parser to indicate
- -- a situation where no name is present (e.g. on a loop or block).
-
- Error_Name : constant Name_Id := Names_Low_Bound + 1;
- -- The special Name_Id value Error_Name is used in the parser to
- -- indicate that some kind of error was encountered in scanning out
- -- the relevant name, so it does not have a representable label.
-
- First_Name_Id : constant Name_Id := Names_Low_Bound + 2;
- -- Subscript of first entry in names table
-
- ----------------------------
- -- Types for Atree Package --
- ----------------------------
-
- -- Node_Id values are used to identify nodes in the tree. They are
- -- subscripts into the Node table declared in package Tree. Note that
- -- the special values Empty and Error are subscripts into this table,
- -- See package Atree for further details.
-
- type Node_Id is range Node_Low_Bound .. Node_High_Bound;
- -- Type used to identify nodes in the tree
-
- subtype Entity_Id is Node_Id;
- -- A synonym for node types, used in the entity package to refer to
- -- nodes that are entities (i.e. nodes with an Nkind of N_Defining_xxx)
- -- All such nodes are extended nodes and these are the only extended
- -- nodes, so that in practice entity and extended nodes are synonymous.
-
- subtype Node_Or_Entity_Id is Node_Id;
- -- A synonym for node types, used in cases where a given value may be used
- -- to represent either a node or an entity. We like to minimize such uses
- -- for obvious reasons of logical type consistency, but where such uses
- -- occur, they should be documented by use of this type.
-
- Empty : constant Node_Id := Node_Low_Bound;
- -- Used to indicate null node. A node is actually allocated with this
- -- Id value, so that Nkind (Empty) = N_Empty. Note that Node_Low_Bound
- -- is zero, so Empty = No_List = zero.
-
- Empty_List_Or_Node : constant := 0;
- -- This constant is used in situations (e.g. initializing empty fields)
- -- where the value set will be used to represent either an empty node
- -- or a non-existent list, depending on the context.
-
- Error : constant Node_Id := Node_Low_Bound + 1;
- -- Used to indicate that there was an error in the source program. A node
- -- is actually allocated at this address, so that Nkind (Error) = N_Error.
-
- Empty_Or_Error : constant Node_Id := Error;
- -- Since Empty and Error are the first two Node_Id values, the test for
- -- N <= Empty_Or_Error tests to see if N is Empty or Error. This definition
- -- provides convenient self-documentation for such tests.
-
- First_Node_Id : constant Node_Id := Node_Low_Bound;
- -- Subscript of first allocated node. Note that Empty and Error are both
- -- allocated nodes, whose Nkind fields can be accessed without error.
-
- ------------------------------
- -- Types for Nlists Package --
- ------------------------------
-
- -- List_Id values are used to identify node lists in the tree. They are
- -- subscripts into the Lists table declared in package Tree. Note that
- -- the special value Error_List is a subscript in this table, but the
- -- value No_List is *not* a valid subscript, and any attempt to apply
- -- list operations to No_List will cause a (detected) error.
-
- type List_Id is range List_Low_Bound .. List_High_Bound;
- -- Type used to identify a node list
-
- No_List : constant List_Id := List_High_Bound;
- -- Used to indicate absence of a list. Note that the value is zero, which
- -- is the same as Empty, which is helpful in initializing nodes where a
- -- value of zero can represent either an empty node or an empty list.
-
- Error_List : constant List_Id := List_Low_Bound;
- -- Used to indicate that there was an error in the source program in a
- -- context which would normally require a list. This node appears to be
- -- an empty list to the list operations (a null list is actually allocated
- -- which has this Id value).
-
- First_List_Id : constant List_Id := Error_List;
- -- Subscript of first allocated list header
-
- ------------------------------
- -- Types for Elists Package --
- ------------------------------
-
- -- Element list Id values are used to identify element lists stored in
- -- the tree (see package Tree for further details). They are formed by
- -- adding a bias (Element_List_Bias) to subscript values in the same
- -- array that is used for node list headers.
-
- type Elist_Id is range Elist_Low_Bound .. Elist_High_Bound;
- -- Type used to identify an element list (Elist header table subscript)
-
- No_Elist : constant Elist_Id := Elist_Low_Bound;
- -- Used to indicate absense of an element list. Note that this is not
- -- an actual Elist header, so element list operations on this value
- -- are not valid.
-
- First_Elist_Id : constant Elist_Id := No_Elist + 1;
- -- Subscript of first allocated Elist header.
-
- -- Element Id values are used to identify individual elements of an
- -- element list (see package Elists for further details).
-
- type Elmt_Id is range Elmt_Low_Bound .. Elmt_High_Bound;
- -- Type used to identify an element list
-
- No_Elmt : constant Elmt_Id := Elmt_Low_Bound;
- -- Used to represent empty element
-
- First_Elmt_Id : constant Elmt_Id := No_Elmt + 1;
- -- Subscript of first allocated Elmt table entry
-
- -------------------------------
- -- Types for Stringt Package --
- -------------------------------
-
- -- String_Id values are used to identify entries in the strings table.
- -- They are subscripts into the strings table defined in package Strings.
-
- -- Note that with only a few exceptions, which are clearly documented, the
- -- type String_Id should be regarded as a private type. In particular it is
- -- never appropriate to perform arithmetic operations using this type.
-
- type String_Id is range Strings_Low_Bound .. Strings_High_Bound;
- -- Type used to identify entries in the strings table
-
- No_String : constant String_Id := Strings_Low_Bound;
- -- Used to indicate missing string Id. Note that the value zero is used
- -- to indicate a missing data value for all the Int types in this section.
-
- First_String_Id : constant String_Id := No_String + 1;
- -- First subscript allocated in string table
-
- -------------------------
- -- Character Code Type --
- -------------------------
-
- -- The type Char is used for character data internally in the compiler,
- -- but character codes in the source are represented by the Char_Code
- -- type. Each character literal in the source is interpreted as being one
- -- of the 2**16 possible Wide_Character codes, and a unique integer value
- -- is assigned, corresponding to the POS value in the Wide_Character type.
- -- String literals are similarly interpreted as a sequence of such codes.
-
- -- Note: when character code values are stored in the tree, they are stored
- -- by adding a bias value (Char_Code_Bias) that results in values that can
- -- be distinguished from other types of values stored in the tree.
-
- type Char_Code is mod 2 ** 16;
- for Char_Code'Size use 16;
-
- function Get_Char_Code (C : Character) return Char_Code;
- pragma Inline (Get_Char_Code);
- -- Function to obtain internal character code from source character. For
- -- the moment, the internal character code is simply the Pos value of the
- -- input source character, but we provide this interface for possible
- -- later support of alternative character sets.
-
- function In_Character_Range (C : Char_Code) return Boolean;
- pragma Inline (In_Character_Range);
- -- Determines if the given character code is in range of type Character,
- -- and if so, returns True. If not, returns False.
-
- function Get_Character (C : Char_Code) return Character;
- pragma Inline (Get_Character);
- -- For a character C that is in character range (see above function), this
- -- function returns the corresponding Character value. It is an error to
- -- call Get_Character if C is not in character range
-
- ---------------------------------------
- -- Types used for Library Management --
- ---------------------------------------
-
- type Unit_Number_Type is new Int;
- -- Unit number. The main source is unit 0, and subsidiary sources have
- -- non-zero numbers starting with 1. Unit numbers are used to index the
- -- file table in Lib.
-
- Main_Unit : constant Unit_Number_Type := 0;
- -- Unit number value for main unit
-
- No_Unit : constant Unit_Number_Type := -1;
- -- Special value used to signal no unit
-
- type Source_File_Index is new Nat;
- -- Type used to index the source file table (see package Sinput)
-
- No_Source_File : constant Source_File_Index := 0;
- -- Value used to indicate no source file present
-
- System_Source_File_Index : constant Source_File_Index := 1;
- -- Value used for source file table entry for system.ads, which is
- -- always the first source file read (see unit Targparm for details).
-
- subtype File_Name_Type is Name_Id;
- -- File names are stored in the names table and this synonym is used to
- -- indicate that a Name_Id value is being used to hold a simple file
- -- name (which does not include any directory information).
-
- No_File : constant File_Name_Type := File_Name_Type (No_Name);
- -- Constant used to indicate no file found
-
- subtype Unit_Name_Type is Name_Id;
- -- Unit names are stored in the names table and this synonym is used to
- -- indicate that a Name_Id value is being used to hold a unit name.
-
- -----------------------------------
- -- Representation of Time Stamps --
- -----------------------------------
-
- -- All compiled units are marked with a time stamp which is derived from
- -- the source file (we assume that the host system has the concept of a
- -- file time stamp which is modified when a file is modified). These
- -- time stamps are used to ensure consistency of the set of units that
- -- constitutes a library. Time stamps are 12 character strings with
- -- with the following format:
-
- -- YYYYMMDDHHMMSS
-
- -- YYYY year
- -- MM month (2 digits 01-12)
- -- DD day (2 digits 01-31)
- -- HH hour (2 digits 00-23)
- -- MM minutes (2 digits 00-59)
- -- SS seconds (2 digits 00-59)
-
- -- In the case of Unix systems (and other systems which keep the time in
- -- GMT), the time stamp is the GMT time of the file, not the local time.
- -- This solves problems in using libraries across networks with clients
- -- spread across multiple time-zones.
-
- Time_Stamp_Length : constant := 14;
- -- Length of time stamp value
-
- subtype Time_Stamp_Index is Natural range 1 .. Time_Stamp_Length;
- type Time_Stamp_Type is new String (Time_Stamp_Index);
- -- Type used to represent time stamp
-
- Empty_Time_Stamp : constant Time_Stamp_Type := (others => ' ');
- -- Type used to represent an empty or missing time stamp. Looks less
- -- than any real time stamp if two time stamps are compared. Note that
- -- although this is not a private type, clients should not rely on the
- -- exact way in which this string is represented, and instead should
- -- use the subprograms below.
-
- Dummy_Time_Stamp : constant Time_Stamp_Type := (others => '0');
- -- This is used for dummy time stamp values used in the D lines for
- -- non-existant files, and is intended to be an impossible value.
-
- function "=" (Left, Right : Time_Stamp_Type) return Boolean;
- function "<=" (Left, Right : Time_Stamp_Type) return Boolean;
- function ">=" (Left, Right : Time_Stamp_Type) return Boolean;
- function "<" (Left, Right : Time_Stamp_Type) return Boolean;
- function ">" (Left, Right : Time_Stamp_Type) return Boolean;
- -- Comparison functions on time stamps. Note that two time stamps
- -- are defined as being equal if they have the same day/month/year
- -- and the hour/minutes/seconds values are within 2 seconds of one
- -- another. This deals with rounding effects in library file time
- -- stamps caused by copying operations during installation. We have
- -- particularly noticed that WinNT seems susceptible to such changes.
- -- Note: the Empty_Time_Stamp value looks equal to itself, and less
- -- than any non-empty time stamp value.
-
- procedure Split_Time_Stamp
- (TS : Time_Stamp_Type;
- Year : out Nat;
- Month : out Nat;
- Day : out Nat;
- Hour : out Nat;
- Minutes : out Nat;
- Seconds : out Nat);
- -- Given a time stamp, decompose it into its components
-
- procedure Make_Time_Stamp
- (Year : Nat;
- Month : Nat;
- Day : Nat;
- Hour : Nat;
- Minutes : Nat;
- Seconds : Nat;
- TS : out Time_Stamp_Type);
- -- Given the components of a time stamp, initialize the value
-
- -----------------------------------------------
- -- Types used for Pragma Suppress Management --
- -----------------------------------------------
-
- -- The following record contains an entry for each recognized check name
- -- for pragma Suppress. It is used to represent current settings of scope
- -- based suppress actions from pragma Suppress or command line settings.
-
- type Suppress_Record is record
- Access_Checks : Boolean;
- Accessibility_Checks : Boolean;
- Discriminant_Checks : Boolean;
- Division_Checks : Boolean;
- Elaboration_Checks : Boolean;
- Index_Checks : Boolean;
- Length_Checks : Boolean;
- Overflow_Checks : Boolean;
- Range_Checks : Boolean;
- Storage_Checks : Boolean;
- Tag_Checks : Boolean;
- end record;
-
- -- To add a new check type to GNAT, the following steps are required:
-
- -- 1. Add an appropriate entry to the above record type
- -- 2. Add an entry to Snames spec and body for the new name
- -- 3. Add an entry to the definition of Check_Id in the Snames spec
- -- 4. Add a new entity flag definition in Einfo for the check
- -- 5. Add a new function to Sem.Util to handle the new check test
- -- 6. Add appropriate processing for pragma Suppress in Sem.Prag
- -- 7. Add a branch to the case statement in Sem.Ch8.Pop_Scope
- -- 8. Add a new Do_xxx_Check flag to Sinfo (if required)
- -- 9. Add appropriate checks for the new test
-
- -----------------------------------
- -- Global Exception Declarations --
- -----------------------------------
-
- -- This section contains declarations of exceptions that are used
- -- throughout the compiler.
-
- Unrecoverable_Error : exception;
- -- This exception is raised to immediately terminate the compilation
- -- of the current source program. Used in situations where things are
- -- bad enough that it doesn't seem worth continuing (e.g. max errors
- -- reached, or a required file is not found). Also raised when the
- -- compiler finds itself in trouble after an error (see Comperr).
-
- ---------------------------------
- -- Parameter Mechanism Control --
- ---------------------------------
-
- -- Function and parameter entities have a field that records the
- -- passing mechanism. See specification of Sem_Mech for full details.
- -- The following subtype is used to represent values of this type:
-
- subtype Mechanism_Type is Int range -10 .. Int'Last;
- -- Type used to represent a mechanism value. This is a subtype rather
- -- than a type to avoid some annoying processing problems with certain
- -- routines in Einfo (processing them to create the corresponding C).
-
-end Types;