-/* Target definitions for GNU compiler for Intel 80386 running Interix
- Parts Copyright (C) 1991, 1999, 2000 Free Software Foundation, Inc.
+/* Target definitions for GCC for Intel 80386 running Interix
+ Parts Copyright (C) 1991, 1999, 2000, 2002, 2003, 2004, 2007, 2008
+ Free Software Foundation, Inc.
Parts:
by Douglas B. Rupp (drupp@cs.washington.edu).
by Donn Terry (donn@softway.com).
by Mumit Khan (khan@xraylith.wisc.edu).
-This file is part of GNU CC.
+This file is part of GCC.
-GNU CC is free software; you can redistribute it and/or modify
+GCC is free software; you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
+the Free Software Foundation; either version 3, or (at your option)
any later version.
-GNU CC is distributed in the hope that it will be useful,
+GCC is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
+along with GCC; see the file COPYING3. If not see
+<http://www.gnu.org/licenses/>. */
-#define YES_UNDERSCORES
-
-/* YES_UNDERSCORES must precede gas.h */
-#include <i386/gas.h>
/* The rest must follow. */
-#define DBX_DEBUGGING_INFO
-#define SDB_DEBUGGING_INFO
+#define DBX_DEBUGGING_INFO 1
+#define SDB_DEBUGGING_INFO 1
#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-#define HANDLE_SYSV_PRAGMA
+#define HANDLE_SYSV_PRAGMA 1
#undef HANDLE_PRAGMA_WEAK /* until the link format can handle it */
/* By default, target has a 80387, uses IEEE compatible arithmetic,
and returns float values in the 387 and needs stack probes
- We also align doubles to 64-bits for MSVC default compatibility */
+ We also align doubles to 64-bits for MSVC default compatibility
+ We do bitfields MSVC-compatibly by default, too. */
#undef TARGET_SUBTARGET_DEFAULT
#define TARGET_SUBTARGET_DEFAULT \
(MASK_80387 | MASK_IEEE_FP | MASK_FLOAT_RETURNS | MASK_STACK_PROBE | \
- MASK_ALIGN_DOUBLE)
+ MASK_ALIGN_DOUBLE | MASK_MS_BITFIELD_LAYOUT)
#undef TARGET_CPU_DEFAULT
-#define TARGET_CPU_DEFAULT 2 /* 486 */
+#define TARGET_CPU_DEFAULT TARGET_CPU_DEFAULT_i486
-#define WCHAR_UNSIGNED 1
#define WCHAR_TYPE_SIZE 16
#define WCHAR_TYPE "short unsigned int"
#define ASM_LOAD_ADDR(loc, reg) " leal " #loc "," #reg "\n"
+#define TARGET_DECLSPEC 1
+
/* cpp handles __STDC__ */
-#undef CPP_PREDEFINES
-#define CPP_PREDEFINES " \
- -D__INTERIX \
- -D__OPENNT \
- -D_M_IX86=300 -D_X86_=1 \
- -D__stdcall=__attribute__((__stdcall__)) \
- -D__cdecl=__attribute__((__cdecl__)) \
- -D__declspec(x)=__attribute__((x)) \
- -Asystem=unix -Asystem=interix"
+#define TARGET_OS_CPP_BUILTINS() \
+ do \
+ { \
+ builtin_define ("__INTERIX"); \
+ builtin_define ("__OPENNT"); \
+ builtin_define ("_M_IX86=300"); \
+ builtin_define ("_X86_=1"); \
+ builtin_define ("__stdcall=__attribute__((__stdcall__))"); \
+ builtin_define ("__cdecl=__attribute__((__cdecl__))"); \
+ builtin_assert ("system=unix"); \
+ builtin_assert ("system=interix"); \
+ if (preprocessing_asm_p ()) \
+ builtin_define_std ("LANGUAGE_ASSEMBLY"); \
+ else \
+ { \
+ builtin_define_std ("LANGUAGE_C"); \
+ if (c_dialect_cxx ()) \
+ builtin_define_std ("LANGUAGE_C_PLUS_PLUS"); \
+ if (c_dialect_objc ()) \
+ builtin_define_std ("LANGUAGE_OBJECTIVE_C"); \
+ } \
+ } \
+ while (0)
#undef CPP_SPEC
/* Write out the correct language type definition for the header files.
Unless we have assembler language, write out the symbols for C.
- cpp_cpu is an Intel specific variant. See i386.h
- mieee is an Alpha specific variant. Cross polination a bad idea.
+ mieee is an Alpha specific variant. Cross pollination a bad idea.
*/
-#define CPP_SPEC "\
-%{!.S: -D__LANGUAGE_C__ -D__LANGUAGE_C %{!ansi:-DLANGUAGE_C}} \
-%{.S: -D__LANGUAGE_ASSEMBLY__ -D__LANGUAGE_ASSEMBLY %{!ansi:-DLANGUAGE_ASSEMBLY}} \
-%{.cc: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus} \
-%{.cxx: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus} \
-%{.C: -D__LANGUAGE_C_PLUS_PLUS__ -D__LANGUAGE_C_PLUS_PLUS -D__cplusplus} \
-%{.m: -D__LANGUAGE_OBJECTIVE_C__ -D__LANGUAGE_OBJECTIVE_C} \
--remap \
-%(cpp_cpu) \
-%{posix:-D_POSIX_SOURCE} \
+#define CPP_SPEC "-remap %{posix:-D_POSIX_SOURCE} \
-isystem %$INTERIX_ROOT/usr/include"
-#undef TARGET_VERSION
#define TARGET_VERSION fprintf (stderr, " (i386 Interix)");
/* The global __fltused is necessary to cause the printf/scanf routines
for outputting/inputting floating point numbers to be loaded. Since this
is kind of hard to detect, we just do it all the time. */
-
-#ifdef ASM_FILE_START
-#undef ASM_FILE_START
-#endif
-#define ASM_FILE_START(FILE) \
- do { fprintf (FILE, "\t.file\t"); \
- output_quoted_string (FILE, dump_base_name); \
- fprintf (FILE, "\n"); \
- fprintf (FILE, ".global\t__fltused\n"); \
- } while (0)
+#undef X86_FILE_START_FLTUSED
+#define X86_FILE_START_FLTUSED 1
/* A table of bytes codes used by the ASM_OUTPUT_ASCII and
ASM_OUTPUT_LIMITED_STRING macros. Each byte in the table
generated assembly code more compact (and thus faster to assemble)
as well as more readable, especially for targets like the i386
(where the only alternative is to output character sequences as
- comma separated lists of numbers). */
+ comma separated lists of numbers). */
#define ASM_OUTPUT_LIMITED_STRING(FILE, STR) \
do \
{ \
- register const unsigned char *_limited_str = \
+ const unsigned char *_limited_str = \
(const unsigned char *) (STR); \
- register unsigned ch; \
+ unsigned ch; \
fprintf ((FILE), "%s\"", STRING_ASM_OP); \
for (; (ch = *_limited_str); _limited_str++) \
{ \
- register int escape = ESCAPES[ch]; \
+ int escape = ESCAPES[ch]; \
switch (escape) \
{ \
case 0: \
#define ASM_OUTPUT_ASCII(FILE, STR, LENGTH) \
do \
{ \
- register const unsigned char *_ascii_bytes = \
+ const unsigned char *_ascii_bytes = \
(const unsigned char *) (STR); \
- register const unsigned char *limit = _ascii_bytes + (LENGTH); \
- register unsigned bytes_in_chunk = 0; \
+ const unsigned char *limit = _ascii_bytes + (LENGTH); \
+ unsigned bytes_in_chunk = 0; \
for (; _ascii_bytes < limit; _ascii_bytes++) \
{ \
- register const unsigned char *p; \
+ const unsigned char *p; \
if (bytes_in_chunk >= 64) \
{ \
fputc ('\n', (FILE)); \
#undef LD_INIT_SWITCH
#undef LD_FINI_SWITCH
-#define EH_FRAME_IN_DATA_SECTION
-
-/* Note that there appears to be two different ways to support const
- sections at the moment. You can either #define the symbol
- READONLY_DATA_SECTION (giving it some code which switches to the
- readonly data section) or else you can #define the symbols
- EXTRA_SECTIONS, EXTRA_SECTION_FUNCTIONS, SELECT_SECTION, and
- SELECT_RTX_SECTION. We do both here just to be on the safe side. */
-
-#define USE_CONST_SECTION 1
-
-#define CONST_SECTION_ASM_OP "\t.section\t.rdata,\"r\""
-
-/* A default list of other sections which we might be "in" at any given
- time. For targets that use additional sections (e.g. .tdesc) you
- should override this definition in the target-specific file which
- includes this file. */
-
-#undef EXTRA_SECTIONS
-#define EXTRA_SECTIONS in_const
-
-/* A default list of extra section function definitions. For targets
- that use additional sections (e.g. .tdesc) you should override this
- definition in the target-specific file which includes this file. */
+/* The following are needed for us to be able to use winnt.c, but are not
+ otherwise meaningful to Interix. (The functions that use these are
+ never called because we don't do DLLs.) */
+#define TARGET_NOP_FUN_DLLIMPORT 1
+#define drectve_section() /* nothing */
-#undef EXTRA_SECTION_FUNCTIONS
-#define EXTRA_SECTION_FUNCTIONS \
- CONST_SECTION_FUNCTION
+/* Objective-C has its own packing rules...
+ Objc tries to parallel the code in stor-layout.c at runtime
+ (see libobjc/encoding.c). This (compile-time) packing info isn't
+ available at runtime, so it's hopeless to try.
-#undef READONLY_DATA_SECTION
-#define READONLY_DATA_SECTION() const_section ()
+ And if the user tries to set the flag for objc, give an error
+ so he has some clue. */
-#define CONST_SECTION_FUNCTION \
-void \
-const_section () \
-{ \
- if (!USE_CONST_SECTION) \
- text_section(); \
- else if (in_section != in_const) \
+#undef SUBTARGET_OVERRIDE_OPTIONS
+#define SUBTARGET_OVERRIDE_OPTIONS \
+do { \
+ if (strcmp (lang_hooks.name, "GNU Objective-C") == 0) \
{ \
- fprintf (asm_out_file, "%s\n", CONST_SECTION_ASM_OP); \
- in_section = in_const; \
+ if ((target_flags & MASK_MS_BITFIELD_LAYOUT) != 0 \
+ && (target_flags_explicit & MASK_MS_BITFIELD_LAYOUT) != 0) \
+ { \
+ error ("ms-bitfields not supported for objc"); \
+ } \
+ target_flags &= ~MASK_MS_BITFIELD_LAYOUT; \
} \
-}
+} while (0)
+
+#define EH_FRAME_IN_DATA_SECTION
+
+#define READONLY_DATA_SECTION_ASM_OP "\t.section\t.rdata,\"r\""
/* The MS compilers take alignment as a number of bytes, so we do as well */
#undef ASM_OUTPUT_ALIGN
} \
while (0)
-#define HOST_PTR_PRINTF "%p"
#define HOST_PTR_AS_INT unsigned long
#define PCC_BITFIELD_TYPE_MATTERS 1
-#define PCC_BITFIELD_TYPE_TEST TYPE_NATIVE(rec)
-#define GROUP_BITFIELDS_BY_ALIGN TYPE_NATIVE(rec)
/* The following two flags are usually "off" for i386, because some non-gnu
tools (for the i386) don't handle them. However, we don't have that
/* Define this macro if references to a symbol must be treated
differently depending on something about the variable or
- function named by the symbol (such as what section it is in).
-
- Apply stddef, handle (as yet unimplemented) pic.
-
- stddef renaming does NOT apply to Alpha. */
-
-union tree_node;
-const char *gen_stdcall_suffix PARAMS ((union tree_node *));
-
-#undef ENCODE_SECTION_INFO
-#define ENCODE_SECTION_INFO(DECL) \
-do \
- { \
- if (flag_pic) \
- { \
- rtx rtl = (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \
- ? TREE_CST_RTL (DECL) : DECL_RTL (DECL)); \
- SYMBOL_REF_FLAG (XEXP (rtl, 0)) \
- = (TREE_CODE_CLASS (TREE_CODE (DECL)) != 'd' \
- || ! TREE_PUBLIC (DECL)); \
- } \
- if (TREE_CODE (DECL) == FUNCTION_DECL) \
- if (lookup_attribute ("stdcall", \
- TYPE_ATTRIBUTES (TREE_TYPE (DECL)))) \
- XEXP (DECL_RTL (DECL), 0) = \
- gen_rtx (SYMBOL_REF, Pmode, gen_stdcall_suffix (DECL)); \
- } \
-while (0)
+ function named by the symbol (such as what section it is in). */
+
+#define SUBTARGET_ENCODE_SECTION_INFO i386_pe_encode_section_info
+#undef TARGET_STRIP_NAME_ENCODING
+#define TARGET_STRIP_NAME_ENCODING i386_pe_strip_name_encoding_full
-/* This macro gets just the user-specified name
- out of the string in a SYMBOL_REF. Discard
- trailing @[NUM] encoded by ENCODE_SECTION_INFO. */
-#undef STRIP_NAME_ENCODING
-#define STRIP_NAME_ENCODING(VAR,SYMBOL_NAME) \
-do { \
- const char *_p; \
- const char *_name = SYMBOL_NAME; \
- for (_p = _name; *_p && *_p != '@'; ++_p) \
- ; \
- if (*_p == '@') \
- { \
- int _len = _p - _name; \
- char *_new_name = (char *) alloca (_len + 1); \
- strncpy (_new_name, _name, _len); \
- _new_name[_len] = '\0'; \
- (VAR) = _new_name; \
- } \
- else \
- (VAR) = _name; \
-} while (0)
-
#if 0
/* Turn this back on when the linker is updated to handle grouped
.data$ sections correctly. See corresponding note in i386/interix.c.
MK. */
-/* Define this macro if in some cases global symbols from one translation
- unit may not be bound to undefined symbols in another translation unit
- without user intervention. For instance, under Microsoft Windows
- symbols must be explicitly imported from shared libraries (DLLs). */
-#define MULTIPLE_SYMBOL_SPACES
+/* Interix uses explicit import from shared libraries. */
+#define MULTIPLE_SYMBOL_SPACES 1
-extern void i386_pe_unique_section ();
-#define UNIQUE_SECTION(DECL,RELOC) i386_pe_unique_section (DECL, RELOC)
+extern void i386_pe_unique_section (tree, int);
+#define TARGET_ASM_UNIQUE_SECTION i386_pe_unique_section
+#define TARGET_ASM_FUNCTION_RODATA_SECTION default_no_function_rodata_section
#define SUPPORTS_ONE_ONLY 1
#endif /* 0 */
/* Don't assume anything about the header files. */
#define NO_IMPLICIT_EXTERN_C
-/* MSVC returns structs of up to 8 bytes via registers. */
+/* MSVC returns structs of up to 8 bytes via registers. */
#define DEFAULT_PCC_STRUCT_RETURN 0
-#undef RETURN_IN_MEMORY
-#define RETURN_IN_MEMORY(TYPE) \
- (TYPE_MODE (TYPE) == BLKmode || \
- (AGGREGATE_TYPE_P (TYPE) && int_size_in_bytes(TYPE) > 8 ))
+#define SUBTARGET_RETURN_IN_MEMORY(TYPE, FNTYPE) \
+ (TYPE_MODE (TYPE) == BLKmode \
+ || (AGGREGATE_TYPE_P (TYPE) && int_size_in_bytes (TYPE) > 8 ))
\ No newline at end of file
projects / msp430-gcc.git / blobdiff