+++ /dev/null
-/* Definitions of target machine for GNU compiler. MIPS R4000 version with
- GOFAST floating point library.
- Copyright (C) 1994, 1995, 1996, 1997, 1999, 2000 Free Software Foundation, Inc.
-
-This file is part of GNU CC.
-
-GNU CC is free software; you can redistribute it and/or modify
-it under the terms of the GNU General Public License as published by
-the Free Software Foundation; either version 2, or (at your option)
-any later version.
-
-GNU CC is distributed in the hope that it will be useful,
-but WITHOUT ANY WARRANTY; without even the implied warranty of
-MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-GNU General Public License for more details.
-
-You should have received a copy of the GNU General Public License
-along with GNU CC; see the file COPYING. If not, write to
-the Free Software Foundation, 59 Temple Place - Suite 330,
-Boston, MA 02111-1307, USA. */
-
-#define OBJECT_FORMAT_ELF
-
-/* Default to -mips3. */
-#define TARGET_DEFAULT MASK_FLOAT64|MASK_64BIT
-#define MIPS_ISA_DEFAULT 3
-
-/* This should change to n32 when it is supported in gas. */
-#define MIPS_ABI_DEFAULT ABI_O64
-
-/* Until we figure out what MIPS ELF targets normally use, just do
- stabs in ELF. */
-#ifndef PREFERRED_DEBUGGING_TYPE
-#define PREFERRED_DEBUGGING_TYPE DBX_DEBUG
-#endif
-
-/* US Software GOFAST library support. */
-#include "gofast.h"
-#define INIT_SUBTARGET_OPTABS INIT_GOFAST_OPTABS
-
-#include "mips/mips.h"
-
-#undef CPP_PREDEFINES
-#define CPP_PREDEFINES "-Dmips -DMIPSEB -DR4000 -D_mips -D_MIPSEB -D_R4000"
-
-/* I would rather put this in CPP_PREDEFINES, but the gcc driver
- doesn't handle -U options in CPP_PREDEFINES. */
-#undef SUBTARGET_CPP_SPEC
-#define SUBTARGET_CPP_SPEC "\
-%{!mips1:%{!mips2:-U__mips -D__mips=3 -D__mips64}}"
-
-/* Use memcpy, et. al., rather than bcopy. */
-#define TARGET_MEM_FUNCTIONS
-
-/* Biggest alignment supported by the object file format of this
- machine. Use this macro to limit the alignment which can be
- specified using the `__attribute__ ((aligned (N)))' construct. If
- not defined, the default value is `BIGGEST_ALIGNMENT'. */
-
-#undef MAX_OFILE_ALIGNMENT
-#define MAX_OFILE_ALIGNMENT (32768*8)
-
-/* We need to use .esize and .etype instead of .size and .type to
- avoid conflicting with ELF directives. */
-#undef PUT_SDB_SIZE
-#define PUT_SDB_SIZE(a) \
-do { \
- extern FILE *asm_out_text_file; \
- fprintf (asm_out_text_file, "\t.esize\t"); \
- fprintf (asm_out_text_file, HOST_WIDE_INT_PRINT_DEC, (HOST_WIDE_INT) (a)); \
- fprintf (asm_out_text_file, ";"); \
-} while (0)
-
-#undef PUT_SDB_TYPE
-#define PUT_SDB_TYPE(a) \
-do { \
- extern FILE *asm_out_text_file; \
- fprintf (asm_out_text_file, "\t.etype\t0x%x;", (a)); \
-} while (0)
-
-/* Switch into a generic section. */
-#undef TARGET_ASM_NAMED_SECTION
-#define TARGET_ASM_NAMED_SECTION default_elf_asm_named_section
-
-/* Given that Irix has it's own headers, not having TARGET_GAS here
- seems a mistake. If we actually need to be prepared for file
- switching, then we need a custom TARGET_ASM_NAMED_SECTION too. */
-
-#undef TEXT_SECTION
-#define TEXT_SECTION() \
-do { \
- if (TARGET_FILE_SWITCHING) \
- abort (); \
- fputs (TEXT_SECTION_ASM_OP, asm_out_file); \
- fputc ('\n', asm_out_file); \
-} while (0)
-
-/* The following macro defines the format used to output the second
- operand of the .type assembler directive. Different svr4 assemblers
- expect various different forms for this operand. The one given here
- is just a default. You may need to override it in your machine-
- specific tm.h file (depending upon the particulars of your assembler). */
-
-#define TYPE_OPERAND_FMT "@%s"
-
-/* Define the strings used for the special svr4 .type and .size directives.
- These strings generally do not vary from one system running svr4 to
- another, but if a given system (e.g. m88k running svr) needs to use
- different pseudo-op names for these, they may be overridden in the
- file which includes this one. */
-
-#undef TYPE_ASM_OP
-#undef SIZE_ASM_OP
-#define TYPE_ASM_OP "\t.type\t"
-#define SIZE_ASM_OP "\t.size\t"
-
-/* These macros generate the special .type and .size directives which
- are used to set the corresponding fields of the linker symbol table
- entries in an ELF object file under SVR4. These macros also output
- the starting labels for the relevant functions/objects. */
-
-/* Write the extra assembler code needed to declare an object properly. */
-
-#undef ASM_DECLARE_OBJECT_NAME
-#define ASM_DECLARE_OBJECT_NAME(FILE, NAME, DECL) \
- do { \
- fprintf (FILE, "%s", TYPE_ASM_OP); \
- assemble_name (FILE, NAME); \
- putc (',', FILE); \
- fprintf (FILE, TYPE_OPERAND_FMT, "object"); \
- putc ('\n', FILE); \
- size_directive_output = 0; \
- if (!flag_inhibit_size_directive && DECL_SIZE (DECL)) \
- { \
- size_directive_output = 1; \
- fprintf (FILE, "%s", SIZE_ASM_OP); \
- assemble_name (FILE, NAME); \
- fprintf (FILE, ","); \
- fprintf (FILE, HOST_WIDE_INT_PRINT_DEC, \
- int_size_in_bytes (TREE_TYPE (DECL))); \
- fprintf (FILE, "\n"); \
- } \
- mips_declare_object (FILE, NAME, "", ":\n", 0); \
- } while (0)
-
-/* Output the size directive for a decl in rest_of_decl_compilation
- in the case where we did not do so before the initializer.
- Once we find the error_mark_node, we know that the value of
- size_directive_output was set
- by ASM_DECLARE_OBJECT_NAME when it was run for the same decl. */
-
-#undef ASM_FINISH_DECLARE_OBJECT
-#define ASM_FINISH_DECLARE_OBJECT(FILE, DECL, TOP_LEVEL, AT_END) \
-do { \
- const char *name = XSTR (XEXP (DECL_RTL (DECL), 0), 0); \
- if (!flag_inhibit_size_directive && DECL_SIZE (DECL) \
- && ! AT_END && TOP_LEVEL \
- && DECL_INITIAL (DECL) == error_mark_node \
- && !size_directive_output) \
- { \
- size_directive_output = 1; \
- fprintf (FILE, "%s", SIZE_ASM_OP); \
- assemble_name (FILE, name); \
- fprintf (FILE, ","); \
- fprintf (FILE, HOST_WIDE_INT_PRINT_DEC, \
- int_size_in_bytes (TREE_TYPE (DECL))); \
- fprintf (FILE, "\n"); \
- } \
- } while (0)
-
-#define ASM_OUTPUT_DEF(FILE,LABEL1,LABEL2) \
- do { fputc ( '\t', FILE); \
- assemble_name (FILE, LABEL1); \
- fputs ( " = ", FILE); \
- assemble_name (FILE, LABEL2); \
- fputc ( '\n', FILE); \
- } while (0)
-
-/* Note about .weak vs. .weakext
- The mips native assemblers support .weakext, but not .weak.
- mips-elf gas supports .weak, but not .weakext.
- mips-elf gas has been changed to support both .weak and .weakext,
- but until that support is generally available, the 'if' below
- should serve. */
-
-#undef ASM_WEAKEN_LABEL
-#define ASM_WEAKEN_LABEL(FILE,NAME) ASM_OUTPUT_WEAK_ALIAS(FILE,NAME,0)
-#define ASM_OUTPUT_WEAK_ALIAS(FILE,NAME,VALUE) \
- do { \
- if (TARGET_GAS) \
- fputs ("\t.weak\t", FILE); \
- else \
- fputs ("\t.weakext\t", FILE); \
- assemble_name (FILE, NAME); \
- if (VALUE) \
- { \
- fputc (' ', FILE); \
- assemble_name (FILE, VALUE); \
- } \
- fputc ('\n', FILE); \
- } while (0)
-
-#define MAKE_DECL_ONE_ONLY(DECL) (DECL_WEAK (DECL) = 1)
-#undef UNIQUE_SECTION
-#define UNIQUE_SECTION(DECL,RELOC) \
-do { \
- int len, size, sec; \
- const char *name, *prefix; \
- char *string; \
- static const char *const prefixes[4][2] = { \
- { ".text.", ".gnu.linkonce.t." }, \
- { ".rodata.", ".gnu.linkonce.r." }, \
- { ".data.", ".gnu.linkonce.d." }, \
- { ".sdata.", ".gnu.linkonce.s." } \
- }; \
- \
- name = IDENTIFIER_POINTER (DECL_ASSEMBLER_NAME (DECL)); \
- size = int_size_in_bytes (TREE_TYPE (decl)); \
- \
- /* Determine the base section we are interested in: \
- 0=text, 1=rodata, 2=data, 3=sdata, [4=bss]. */ \
- if (TREE_CODE (DECL) == FUNCTION_DECL) \
- sec = 0; \
- else if (DECL_INITIAL (DECL) == 0 \
- || DECL_INITIAL (DECL) == error_mark_node) \
- sec = 2; \
- else if ((TARGET_EMBEDDED_PIC || TARGET_MIPS16) \
- && TREE_CODE (decl) == STRING_CST \
- && !flag_writable_strings) \
- { \
- /* For embedded position independent code, put constant strings \
- in the text section, because the data section is limited to \
- 64K in size. For mips16 code, put strings in the text \
- section so that a PC relative load instruction can be used to \
- get their address. */ \
- sec = 0; \
- } \
- else if (TARGET_EMBEDDED_DATA) \
- { \
- /* For embedded applications, always put an object in read-only data \
- if possible, in order to reduce RAM usage. */ \
- \
- if (DECL_READONLY_SECTION (DECL, RELOC)) \
- sec = 1; \
- else if (size > 0 && size <= mips_section_threshold) \
- sec = 3; \
- else \
- sec = 2; \
- } \
- else \
- { \
- /* For hosted applications, always put an object in small data if \
- possible, as this gives the best performance. */ \
- \
- if (size > 0 && size <= mips_section_threshold) \
- sec = 3; \
- else if (DECL_READONLY_SECTION (DECL, RELOC)) \
- sec = 1; \
- else \
- sec = 2; \
- } \
- \
- prefix = prefixes[sec][DECL_ONE_ONLY (DECL)]; \
- len = strlen (name) + strlen (prefix); \
- string = alloca (len + 1); \
- sprintf (string, "%s%s", prefix, name); \
- \
- DECL_SECTION_NAME (DECL) = build_string (len, string); \
-} while (0)
-
-/* A list of other sections which the compiler might be "in" at any
- given time. */
-#undef EXTRA_SECTIONS
-#define EXTRA_SECTIONS in_sdata, in_rdata
-
-#undef EXTRA_SECTION_FUNCTIONS
-#define EXTRA_SECTION_FUNCTIONS \
- SECTION_FUNCTION_TEMPLATE(sdata_section, in_sdata, SDATA_SECTION_ASM_OP) \
- SECTION_FUNCTION_TEMPLATE(rdata_section, in_rdata, RDATA_SECTION_ASM_OP)
-
-#define SECTION_FUNCTION_TEMPLATE(FN, ENUM, OP) \
-void FN () \
-{ \
- if (in_section != ENUM) \
- { \
- fprintf (asm_out_file, "%s\n", OP); \
- in_section = ENUM; \
- } \
-}
-
-/* On elf, we *do* have support for the .init and .fini sections, and we
- can put stuff in there to be executed before and after `main'. We let
- crtstuff.c and other files know this by defining the following symbols.
- The definitions say how to change sections to the .init and .fini
- sections. This is the same for all known elf assemblers. */
-
-#undef INIT_SECTION_ASM_OP
-#define INIT_SECTION_ASM_OP "\t.section\t.init"
-#undef FINI_SECTION_ASM_OP
-#define FINI_SECTION_ASM_OP "\t.section\t.fini"
-
-/* Don't set the target flags, this is done by the linker script */
-#undef LIB_SPEC
-#define LIB_SPEC ""
-
-#undef STARTFILE_SPEC
-#define STARTFILE_SPEC "crti%O%s crtbegin%O%s %{!mno-crt0:crt0%O%s}"
-
-#undef ENDFILE_SPEC
-#define ENDFILE_SPEC "crtend%O%s crtn%O%s"
projects / msp430-gcc.git / blobdiff