+++ /dev/null
-/* Everything you wanted to know about your machine and C compiler,
- but didn't know who to ask. */
-
-#ifndef VERSION
-#define VERSION "4.3"
-#endif
-
-/* Author: Steven Pemberton, CWI, Amsterdam; steven@cwi.nl
- Bugfixes and upgrades gratefully received.
-
- Copyright (c) 1988, 1989, 1990 Steven Pemberton, CWI, Amsterdam.
- All rights reserved.
-
- Changes by Richard Stallman:
- Undef CHAR_BIT, etc., if defined in stdio.h, Richard Stallman, Aug 90.
- In EPROP, avoid a <= old if bad is set, Richard Stallman, May 91.
- Use gstddef.h, not stddef.h, Richard Stallman, Nov 91.
- Don't declare malloc, instead cast the value, Richard Stallman, Nov 91.
- Include sys/types.h before signal.h, Apr 92.
- Support NO_LONG_DOUBLE_IO in f_define and f_rep; new fn fake_f_rep, Apr 92.
- Enclose -f output in #ifndef _FLOAT_H___, Richard Stallman, May 92.
-
- Change by Jim Wilson:
- Add #undef before every #define, Dec 92.
- Use stddef.h not gstddef.h, Mar 94.
-
- Changes by Paul Eggert, installed Feb 93:
- (fake_f_rep): Clear all of u, initially. Make the ints in u unsigned.
- (f_define): Use ordinary constants for long double
- if it's same width as double. Make __convert_long_double_i unsigned.
- Richard Stallman, May 93:
- In F_check, check NO_LONG_DOUBLE_IO.
-
- Changes by Stephen Moshier, installed Sep 93:
- (FPROP): Recognize 80387 or 68881 XFmode format.
-
- Change by Manfred Hollstein, installed Mar 98:
- (bitpattern): Change type of variable i to unsigned int.
-
-
- COMPILING
- With luck and a following wind, just the following will work:
- cc enquire.c -o enquire
- You may get some messages about unreachable code, which you can ignore.
-
- If your compiler doesn't support: add flag:
- signed char (eg pcc) -DNO_SC
- unsigned char -DNO_UC
- unsigned short and long -DNO_UI
- void -DNO_VOID
- signal(), or setjmp/longjmp() -DNO_SIG
- %Lf in printf -DNO_LONG_DOUBLE_IO
-
- Try to compile first with no flags, and see if you get any errors -
- you might be surprised. (Most non-ANSI compilers need -DNO_SC, though.)
- Some compilers need a -f flag for floating point.
-
- Don't use any optimisation flags: the program may not work if you do.
- Though "while (a+1.0-a-1.0 == 0.0)" may look like "while(1)" to an
- optimiser, to a floating-point unit there's a world of difference.
-
- Some compilers offer various flags for different floating point
- modes; it's worth trying all possible combinations of these.
-
- Add -DID=\"name\" if you want the machine/flags identified in the output.
-
- FAULTY COMPILERS
- Because of bugs and/or inadequacies, some compilers need the following
- defines:
-
- If your C preprocessor doesn't have the predefined __FILE__ macro, and
- you don't want to call this file enquire.c but, say, tell.c, add the
- flag -DFILENAME=\"tell.c\" .
-
- Some compilers won't accept the line "#include FILENAME".
- Add flag -DNO_FILE. In that case, this file *must* be called enquire.c.
-
- Some compilers can't cope with "#ifdef __FILE__". Use -DFILENAME=
- or -DNO_FILE as above.
-
- Some naughty compilers define __STDC__, but don't really support it.
- Some define it as 0, in which case we treat it as undefined.
- But if your compiler defines it, and isn't really ANSI C,
- add flag -DNO_STDC. (To those compiler writers: for shame).
-
- Some naughty compilers define __STDC__, but don't have the stddef.h
- include file. Add flag -DNO_STDDEF.
-
- Summary of naughty-compiler flags:
- If your compiler doesn't support: add flag:
- __FILE__ (and you changed the filename) -DFILENAME=\"name.c\"
- #ifdef __FILE__ -DNO_FILE or -DFILENAME=...
- #include FILENAME -DNO_FILE
- __STDC__ (properly) -DNO_STDC
- stddef.h -DNO_STDDEF
-
- Some systems crash when you try to malloc all store. To save users of
- such defective systems too much grief, they may compile with -DNO_MEM,
- which ignores that bit of the code.
-
- While it is not our policy to support defective compilers, pity has been
- taken on people with compilers that can't produce object files bigger than
- 32k (especially since it was an easy addition). Compile the program
- into separate parts like this:
- cc -DSEP -DPASS0 -o p0.o <other flags> enquire.c
- cc -DSEP -DPASS1 -o p1.o <other flags> enquire.c
- cc -DSEP -DPASS2 -o p2.o <other flags> enquire.c
- cc -DSEP -DPASS3 -o p3.o <other flags> enquire.c
- cc -o enquire p0.o p1.o p2.o p3.o
-
- SYSTEM DEPENDENCIES
- You may possibly need to add some calls to signal() for other sorts of
- exception on your machine than SIGFPE, and SIGOVER. See lines beginning
- #ifdef SIGxxx in main() (and communicate the differences to me!).
-
- OUTPUT
- Run without argument to get the information as English text. If run
- with argument -l (e.g. enquire -l), output is a series of #define's for
- the ANSI standard limits.h include file, excluding MB_MAX_CHAR. If run
- with argument -f, output is a series of #define's for the ANSI standard
- float.h include file (according to ANSI C Draft of Dec 7, 1988).
- Flag -v gives verbose output: output includes the English text above
- as C comments. The program exit(0)'s if everything went ok, otherwise
- it exits with a positive number, telling how many problems there were.
-
- VERIFYING THE COMPILER
- If, having produced the float.h and limits.h header files, you want to
- verify that the compiler reads them back correctly (there are a lot of
- boundary cases, of course, like minimum and maximum numbers), you can
- recompile enquire.c with -DVERIFY set (plus the other flags that you used
- when compiling the version that produced the header files). This then
- recompiles the program so that it #includes "limits.h" and "float.h",
- and checks that the constants it finds there are the same as the
- constants it produces. Run the resulting program with enquire -fl.
- Very few compilers have passed without error.
- NB: You *must* recompile with the same compiler and flags, otherwise
- you may get odd results.
-
- You can also use this option if your compiler already has both files,
- and you want to confirm that this program produces the right results.
-
- TROUBLESHOOTING.
- This program is now quite trustworthy, and suspicious and wrong output
- may well be caused by bugs in the compiler, not in the program (however
- of course, this is not guaranteed, and no responsibility can be
- accepted, etc.)
-
- The program only works if overflows are ignored by the C system or
- are catchable with signal().
-
- If the program fails to run to completion (often with the error message
- "Unexpected signal at point x"), this often turns out to be a bug in the
- C compiler's run-time system. Check what was about to be printed, and
- try to narrow the problem down.
-
- Another possible problem is that you have compiled the program to produce
- loss-of-precision arithmetic traps. The program cannot cope with these,
- and you should re-compile without them. (They should never be the default).
-
- Make sure you compiled with optimisation turned off.
-
- Output preceded by *** WARNING: identifies behaviour of the C system
- deemed incorrect by the program. Likely problems are that printf or
- scanf don't cope properly with certain boundary numbers: this program
- goes to a lot of trouble to calculate its values, and these values
- are mostly boundary numbers. Experience has shown that often printf
- cannot cope with these values, and so in an attempt to increase
- confidence in the output, for each float and double that is printed,
- the printed value is checked by using sscanf to read it back.
- Care is taken that numbers are printed with enough digits to uniquely
- identify them, and therefore that they can be read back identically.
- If the number read back is different, then there is probably a bug in
- printf or sscanf, and the program prints the warning message.
- If the two numbers in the warning look identical, then printf is more
- than likely rounding the last digit(s) incorrectly. To put you at ease
- that the two really are different, the bit patterns of the two numbers
- are also printed. The difference is very likely in the last bit.
- Many scanf's read the minimum double back as 0.0, and similarly cause
- overflow when reading the maximum double. This program quite ruthlessly
- declares all these behaviours faulty. The point is that if you get
- one of these warnings, the output may be wrong, so you should check
- the result carefully if you intend to use the results. Of course, printf
- and sscanf may both be wrong, and cancel each other out, so you should
- check the output carefully anyway.
-
- The warning that "a cast didn't work" refers to cases like this:
-
- float f;
- #define C 1.234567890123456789
- f= C;
- if (f != (float) C) printf ("Wrong!");
-
- A faulty compiler will widen f to double and ignore the cast to float,
- and because there is more accuracy in a double than a float, fail to
- recognise that they are the same. In the actual case in point, f and C
- are passed as parameters to a function that discovers they are not equal,
- so it's just possible that the error was in the parameter passing,
- not in the cast (see function Validate()).
- For ANSI C, which has float constants, the error message is "constant has
- wrong precision".
-
- REPORTING PROBLEMS
- If the program doesn't work for you for any reason that can't be
- narrowed down to a problem in the C compiler, or it has to be changed in
- order to get it to compile, or it produces suspicious output (like a very
- low maximum float, for instance), please mail the problem and an example
- of the incorrect output to steven@cwi.nl or ..!hp4nl!cwi.nl!steven, so that
- improvements can be worked into future versions; cwi.nl is the European
- backbone, and is connected to uunet and other fine hosts.
-
- The program tries to catch and diagnose bugs in the compiler/run-time
- system. I would be especially pleased to have reports of failures so
- that I can improve this service.
-
- I apologise unreservedly for the contorted use of the preprocessor...
-
- THE SMALL PRINT
- You may copy and distribute verbatim copies of this source file.
-
- You may modify this source file, and copy and distribute such
- modified versions, provided that you leave the copyright notice
- at the top of the file and also cause the modified file to carry
- prominent notices stating that you changed the files and the date
- of any change; and cause the whole of any work that you distribute
- or publish, that in whole or in part contains or is a derivative of
- this program or any part thereof, to be licensed at no charge to
- all third parties on terms identical to those here.
-
- If you do have a fix to any problem, please send it to me, so that
- other people can have the benefits.
-
- While every effort has been taken to make this program as reliable as
- possible, no responsibility can be taken for the correctness of the
- output, nor suitability for any particular use.
-
- This program is an offshoot of a project funded by public funds.
- If you use this program for research or commercial use (i.e. more
- than just for the fun of knowing about your compiler) mailing a short
- note of acknowledgement may help keep enquire.c supported.
-
- ACKNOWLEDGEMENTS
- Many people have given time and ideas to making this program what it is.
- To all of them thanks, and apologies for not mentioning them by name.
-
- HISTORY
- Originally started as a program to generate configuration constants
- for a large piece of software we were writing, which later took on
- a life of its own...
- 1.0 Length 6658!; end 1984?
- Unix only. Only printed a dozen maximum int/double values.
- 2.0 Length 10535; Spring 1985
- Prints values as #defines (about 20 of them)
- More extensive floating point, using Cody and Waite
- Handles signals better
- Programs around optimisations
- Handles Cybers
- 3.0 Length 12648; Aug 1987; prints about 42 values
- Added PASS stuff, so treats float as well as double
- 4.0 Length 33891; Feb 1989; prints around 85 values
- First GNU version (for gcc, where they call it hard-params.c)
- Generates float.h and limits.h files
- Handles long double
- Generates warnings for dubious output
- 4.1 Length 47738; April 1989
- Added VERIFY and TEST
- 4.2 Length 63442; Feb 1990
- Added SEP
- Fixed eps/epsneg
- Added check for pseudo-unsigned chars
- Added description for each #define output
- Added check for absence of defines during verify
- Added prototypes
- Added NO_STDC and NO_FILE
- Fixed alignments output
- 4.3 Length 75000; Oct 1990; around 114 lines of output
- Function xmalloc defined, Richard Stallman, June 89.
- Alignments computed from member offsets rather than structure sizes,
- Richard Stallman, Oct 89.
- Print whether char* and int* pointers have the same format;
- also char * and function *.
- Update to Draft C version Dec 7, 1988
- - types of constants produced in limits.h
- (whether to put a U after unsigned shorts and chars and
- whether to output -1024 as (-1023-1))
- - values of SCHAR_MIN/MAX
- - values of *_EPSILON (not the smallest but the effective smallest)
- Added FILENAME, since standard C doesn't allow #define __FILE__
- Renamed from config.c to enquire.c
- Added size_t and ptrdiff_t enquiries
- Added promotion enquiries
- Added type checks of #defines
- Added NO_STDDEF
- Changed endian to allow for cases where not all bits are used
- Sanity check for max integrals
- Fixed definition of setjmp for -DNO_SIG
- Moved #define ... 0.0L inside #ifdef STDC, in case some cpp's tokenize
- Added NO_MEM
-*/
-
-/* Set FILENAME to the name of this file */
-#ifndef FILENAME
-#ifdef NO_FILE
-#define FILENAME "enquire.c"
-#else
-#ifdef __FILE__ /* It's a compiler bug if this fails. Compile with -DNO_FILE */
-#define FILENAME __FILE__
-#else
-#define FILENAME "enquire.c"
-#endif /* __FILE__ */
-#endif /* NO_FILE */
-#endif /* FILENAME */
-
-/* If PASS isn't defined, then this is the first pass over this file. */
-#ifndef PASS
-#ifndef SEP
-#define PASS 1
-#define PASS0 1
-#define PASS1 1
-#endif /* SEP */
-
-/* A description of the ANSI constants */
-#define D_CHAR_BIT "Number of bits in a storage unit"
-#define D_CHAR_MAX "Maximum char"
-#define D_CHAR_MIN "Minimum char"
-#define D_SCHAR_MAX "Maximum signed char"
-#define D_SCHAR_MIN "Minimum signed char"
-#define D_UCHAR_MAX "Maximum unsigned char (minimum is always 0)"
-
-#define D_INT_MAX "Maximum %s"
-#define D_INT_MIN "Minimum %s"
-#define D_UINT_MAX "Maximum unsigned %s (minimum is always 0)"
-
-#define D_FLT_ROUNDS "Addition rounds to 0: zero, 1: nearest, 2: +inf, 3: -inf, -1: unknown"
-#define D_FLT_RADIX "Radix of exponent representation"
-#define D_MANT_DIG "Number of base-FLT_RADIX digits in the significand of a %s"
-#define D_DIG "Number of decimal digits of precision in a %s"
-#define D_MIN_EXP "Minimum int x such that FLT_RADIX**(x-1) is a normalised %s"
-#define D_MIN_10_EXP "Minimum int x such that 10**x is a normalised %s"
-#define D_MAX_EXP "Maximum int x such that FLT_RADIX**(x-1) is a representable %s"
-#define D_MAX_10_EXP "Maximum int x such that 10**x is a representable %s"
-#define D_MAX "Maximum %s"
-#define D_EPSILON "Difference between 1.0 and the minimum %s greater than 1.0"
-#define D_MIN "Minimum normalised %s"
-
-/* Procedure just marks the functions that don't return a result */
-#ifdef NO_VOID
-#define Procedure int
-#else
-#define Procedure void
-#endif
-
-/* Some bad compilers define __STDC__, when they don't support it.
- Compile with -DNO_STDC to get round this.
-*/
-#ifndef NO_STDC
-#ifdef __STDC__
-#if __STDC__ /* If __STDC__ is 0, assume it isn't supported */
-#define STDC
-#endif
-#endif
-#endif
-
-/* Stuff different for ANSI C, and old C:
- ARGS and NOARGS are used for function prototypes.
- Volatile is used to reduce the chance of optimisation,
- and to prevent variables being put in registers (when setjmp/longjmp
- wouldn't work as we want)
- Long_double is the longest floating point type available.
- stdc is used in tests like "if (stdc)", which is less ugly than #ifdef.
- U is output after unsigned constants.
- */
-#ifdef STDC
-
-#define ARGS(x) x
-#define NOARGS (void)
-#define Volatile volatile
-#define Long_double long double
-#define stdc 1
-#define U "U"
-
-#else /* Old style C */
-
-#define ARGS(x) ()
-#define NOARGS ()
-#define Volatile static
-#define Long_double double
-#define stdc 0
-#define U ""
-
-#endif /* STDC */
-
-/* include files */
-/* Stdio.h might include limits.h, and limits.h might include float.h, and
- float.h is probably the float.h put together by the gcc makefile to
- cause errors. We use our special define to assure float.h that we don't
- really need it. */
-#define __GCC_FLOAT_NOT_NEEDED
-#include <stdio.h>
-
-#ifdef STDC
-#ifndef NO_STDDEF
-#include <stddef.h> /* for size_t: if this fails, define NO_STDDEF */
-#endif
-#endif
-
-#ifdef NO_SIG
-#define jmp_buf int
-#else
-#include <sys/types.h>
-#include <signal.h>
-#include <setjmp.h>
-#endif
-
-/* Kludge around the possibility that <stdio.h> includes <limits.h> */
-#ifdef CHAR_BIT
-#undef CHAR_BIT
-#undef CHAR_MAX
-#undef CHAR_MIN
-#undef SCHAR_MAX
-#undef SCHAR_MIN
-#undef UCHAR_MAX
-#undef UCHAR_MIN
-#endif
-
-#ifdef VERIFY
-#include "limits.h"
-#endif
-
-#ifndef SYS_FLOAT_H_WRAP
-#define SYS_FLOAT_H_WRAP 0
-#endif
-
-#if SYS_FLOAT_H_WRAP || defined VERIFY
-#include "float.h"
-#endif
-
-#define Vprintf if (V) printf
-#define Unexpected(place) if (setjmp(lab)!=0) croak(place)
-#define fabs(x) (((x)<0.0)?(-x):(x))
-
-#endif /* PASS */
-
-#ifdef PASS0
-
-/* Prototypes for what's to come: */
-
-int false NOARGS;
-
-#ifdef NO_STDDEF
-char *malloc (); /* Old style prototype */
-#else
-char *malloc ARGS((size_t size));
-#endif
-
-Procedure exit ARGS((int status));
-
-char *f_rep ARGS((int precision, Long_double val));
-char *fake_f_rep ARGS((char *type, Long_double val));
-
-int maximum_int NOARGS;
-int cprop NOARGS;
-int basic NOARGS;
-Procedure sprop NOARGS;
-Procedure iprop NOARGS;
-Procedure lprop NOARGS;
-Procedure usprop NOARGS;
-Procedure uiprop NOARGS;
-Procedure ulprop NOARGS;
-int fprop ARGS((int bits_per_byte));
-int dprop ARGS((int bits_per_byte));
-int ldprop ARGS((int bits_per_byte));
-Procedure efprop ARGS((int fprec, int dprec, int lprec));
-Procedure edprop ARGS((int fprec, int dprec, int lprec));
-Procedure eldprop ARGS((int fprec, int dprec, int lprec));
-
-int setmode ARGS((char *s));
-Procedure farewell ARGS((int bugs));
-Procedure describe ARGS((char *description, char *extra));
-Procedure missing ARGS((char *s));
-Procedure fmissing ARGS((char *s));
-Procedure check_defines NOARGS;
-Procedure bitpattern ARGS((char *p, unsigned int size));
-int ceil_log ARGS((int base, Long_double x));
-Procedure croak ARGS((int place));
-Procedure eek_a_bug ARGS((char *problem));
-Procedure endian ARGS((int bits_per_byte));
-int exponent ARGS((Long_double x, double *fract, int *exp));
-int floor_log ARGS((int base, Long_double x));
-Procedure f_define ARGS((char *desc, char *extra, char *sort, char *name,
- int prec, Long_double val, Long_double req,
- char *mark));
-Procedure i_define ARGS((char *desc, char *extra, char *sort, char *name,
- long val, long lim, long req, char *mark));
-Procedure u_define ARGS((char *desc, char *extra, char *sort, char *name,
- unsigned long val, unsigned long req, char *mark));
-
-#ifdef NO_SIG /* There's no signal(), or setjmp/longjmp() */
-
- /* Dummy routines instead */
-
- int setjmp ARGS((int lab));
-
- int lab=1;
- int setjmp(lab) int lab; { return(0); }
- Procedure signal(i, p) int i, (*p)(); {}
-
-#else
- jmp_buf lab;
- Procedure overflow(sig) int sig; { /* what to do on over/underflow */
- signal(sig, overflow);
- longjmp(lab, 1);
- }
-
-#endif /*NO_SIG*/
-
-int V= 0, /* verbose */
- L= 0, /* produce limits.h */
- F= 0, /* produce float.h */
- bugs=0; /* The number of (possible) bugs in the output */
-
-char co[4], oc[4]; /* Comment starter and ender symbols */
-
-int bits_per_byte; /* the number of bits per unit returned by sizeof() */
-int flt_rounds; /* The calculated value of FLT_ROUNDS */
-int flt_radix; /* The calculated value of FLT_RADIX */
-
-#ifdef TEST
-/* Set the fp modes on a SUN with 68881 chip, to check that different
- rounding modes etc. get properly detected.
- Compile with -f68881 for cc, -m68881 for gcc, and with additional flag
- -DTEST. Run with additional parameter +hex-number, to set the 68881 mode
- register to hex-number
-*/
-
-/* Bits 0x30 = rounding mode */
-#define ROUND_BITS 0x30
-#define TO_NEAREST 0x00
-#define TO_ZERO 0x10
-#define TO_MINUS_INF 0x20
-#define TO_PLUS_INF 0x30 /* The SUN FP user's guide seems to be wrong here */
-
-/* Bits 0xc0 = extended rounding */
-#define EXT_BITS 0xc0
-#define ROUND_EXTENDED 0x00
-#define ROUND_SINGLE 0x40
-#define ROUND_DOUBLE 0x80
-
-/* Enabled traps */
-#define EXE_INEX1 0x100
-#define EXE_INEX2 0x200
-#define EXE_DZ 0x400
-#define EXE_UNFL 0x800
-#define EXE_OVFL 0x1000
-#define EXE_OPERR 0x2000
-#define EXE_SNAN 0x4000
-#define EXE_BSUN 0x8000
-
-/* Only used for testing, on a Sun with 68881 chip */
-/* Print the FP mode */
-printmode(new) unsigned new; {
- fpmode_(&new);
- printf("New fp mode:\n");
- printf(" Round toward ");
- switch (new & ROUND_BITS) {
- case TO_NEAREST: printf("nearest"); break;
- case TO_ZERO: printf("zero"); break;
- case TO_MINUS_INF: printf("minus infinity"); break;
- case TO_PLUS_INF: printf("plus infinity"); break;
- default: printf("???"); break;
- }
-
- printf("\n Extended rounding precision: ");
-
- switch (new & EXT_BITS) {
- case ROUND_EXTENDED: printf("extended"); break;
- case ROUND_SINGLE: printf("single"); break;
- case ROUND_DOUBLE: printf("double"); break;
- default: printf("???"); break;
- }
-
- printf("\n Enabled exceptions:");
- if (new & (unsigned) EXE_INEX1) printf(" inex1");
- if (new & (unsigned) EXE_INEX2) printf(" inex2");
- if (new & (unsigned) EXE_DZ) printf(" dz");
- if (new & (unsigned) EXE_UNFL) printf(" unfl");
- if (new & (unsigned) EXE_OVFL) printf(" ovfl");
- if (new & (unsigned) EXE_OPERR) printf(" operr");
- if (new & (unsigned) EXE_SNAN) printf(" snan");
- if (new & (unsigned) EXE_BSUN) printf(" bsun");
- printf("\n");
-}
-
-/* Only used for testing, on a Sun with 68881 chip */
-/* Set the FP mode */
-int setmode(s) char *s; {
- unsigned mode=0, dig;
- char c;
-
- while (*s) {
- c= *s++;
- if (c>='0' && c<='9') dig= c-'0';
- else if (c>='a' && c<='f') dig= c-'a'+10;
- else if (c>='A' && c<='F') dig= c-'A'+10;
- else return 1;
- mode= mode<<4 | dig;
- }
- printmode(mode);
- return 0;
-}
-#else
-/* ARGSUSED */
-int setmode(s) char *s; {
- fprintf(stderr, "Can't set mode: not compiled with TEST\n");
- return(1);
-}
-#endif
-
-Procedure farewell(bugs) int bugs; {
- if (bugs == 0) exit(0);
- printf("\n%sFor hints on dealing with the ", co);
- if (bugs == 1) printf("problem");
- else printf("%d problems", bugs);
- printf(" above\n see the section 'TROUBLESHOOTING' in the file ");
- printf("%s%s\n", FILENAME, oc);
- exit(bugs);
-}
-
-/* The program has received a signal where it wasn't expecting one */
-Procedure croak(place) int place; {
- printf("*** Unexpected signal at point %d\n", place);
- farewell(bugs+1); /* An exit isn't essential here, but avoids loops */
-}
-
-/* This is here in case alloca.c is used, which calls this. */
-char *xmalloc(size) unsigned size; {
- char *value = (char *)malloc(size);
- if (value == 0) {
- fprintf(stderr, "Virtual memory exceeded\n");
- exit(bugs+1);
- }
- return value;
-}
-
-int maxint;
-
-int maximum_int() {
- /* Find the maximum integer */
- Volatile int newi, int_max, two=2;
-
- /* Calculate maxint ***********************************/
- /* Calculate 2**n-1 until overflow - then use the previous value */
-
- newi=1; int_max=0;
-
- if (setjmp(lab)==0) { /* Yields int_max */
- while(newi>int_max) {
- int_max=newi;
- newi=newi*two+1;
- }
- }
- Unexpected(0);
- return int_max;
-}
-
-int main(argc, argv) int argc; char *argv[]; {
- int dprec, fprec, lprec;
- int i; char *s; int bad;
-
-#ifdef SIGFPE
- signal(SIGFPE, overflow);
-#endif
-#ifdef SIGOVER
- signal(SIGOVER, overflow);
-#endif
-/* Add more calls as necessary */
-
- Unexpected(1);
-
- bad=0;
- for (i=1; i < argc; i++) {
- s= argv[i];
- if (*s == '-') {
- s++;
- while (*s) {
- switch (*(s++)) {
- case 'v': V=1; break;
- case 'l': L=1; break;
- case 'f': F=1; break;
- default: bad=1; break;
- }
- }
- } else if (*s == '+') {
- s++;
- bad= setmode(s);
- } else bad= 1;
- }
- if (bad) {
- fprintf(stderr,
- "Usage: %s [-vlf]\n v=Verbose l=Limits.h f=Float.h\n",
- argv[0]);
- exit(1);
- }
- if (L || F) {
- co[0]= '/'; oc[0]= ' ';
- co[1]= '*'; oc[1]= '*';
- co[2]= ' '; oc[2]= '/';
- co[3]= '\0'; oc[3]= '\0';
- } else {
- co[0]= '\0'; oc[0]= '\0';
- V=1;
- }
-
- if (L) printf("%slimits.h%s\n", co, oc);
- if (F) printf("%sfloat.h%s\n", co, oc);
- if (F) {
- printf ("#ifndef _FLOAT_H___\n");
- printf ("#define _FLOAT_H___\n");
- if (SYS_FLOAT_H_WRAP)
- printf (" #include_next <float.h>\n");
- }
-#ifdef ID
- printf("%sProduced on %s by enquire version %s, CWI, Amsterdam%s\n",
- co, ID, VERSION, oc);
-#else
- printf("%sProduced by enquire version %s, CWI, Amsterdam%s\n",
- co, VERSION, oc);
-#endif
-
-#ifdef VERIFY
- printf("%sVerification phase%s\n", co, oc);
-#endif
-
-#ifdef NO_SIG
- Vprintf("%sCompiled without signal(): %s%s\n",
- co,
- "there's nothing that can be done if overflow occurs",
- oc);
-#endif
-#ifdef NO_SC
- Vprintf("%sCompiled without signed char%s\n", co, oc);
-#endif
-#ifdef NO_UC
- Vprintf("%Compiled without unsigned char%s\n", co, oc);
-#endif
-#ifdef NO_UI
- Vprintf("%Compiled without unsigned short or long%s\n", co, oc);
-#endif
-#ifdef __STDC__
- Vprintf("%sCompiler claims to be ANSI C level %d%s\n",
- co, __STDC__, oc);
-#else
- Vprintf("%sCompiler does not claim to be ANSI C%s\n", co, oc);
-#endif
- printf("\n");
- check_defines();
-
- maxint= maximum_int();
- bits_per_byte= basic();
- Vprintf("\n");
- if (F||V) {
- fprec= fprop(bits_per_byte);
- dprec= dprop(bits_per_byte);
- lprec= ldprop(bits_per_byte);
- efprop(fprec, dprec, lprec);
- edprop(fprec, dprec, lprec);
- eldprop(fprec, dprec, lprec);
- }
-#ifndef NO_MEM
- if (V) {
- unsigned int size;
- long total;
- /* An extra goody: the approximate amount of data-space */
- /* Allocate store until no more available */
- /* Different implementations have a different argument type
- to malloc. Here we assume that it's the same type as
- that which sizeof() returns */
- size=1<<((bits_per_byte*sizeof(int))-2);
- total=0;
- while (size!=0) {
- while ( malloc((false()?sizeof(int):size)) !=
- (char *)NULL
- ) {
- total+=(size/2);
- }
- size/=2;
- }
-
- Vprintf("%sMemory allocable ~= %ld Kbytes%s\n",
- co, (total+511)/512, oc);
- }
-#endif
- if (F) {
- printf ("#endif %s _FLOAT_H___%s\n", co, oc);
- }
- farewell(bugs);
- return bugs; /* To keep compilers and lint happy */
-}
-
-Procedure eek_a_bug(problem) char *problem; {
- /* The program has discovered a problem */
- printf("\n%s*** WARNING: %s%s\n", co, problem, oc);
- bugs++;
-}
-
-Procedure describe(description, extra) char *description, *extra; {
- /* Produce the description for a #define */
- printf(" %s", co);
- printf(description, extra);
- printf("%s\n", oc);
-}
-
-Procedure i_define(desc, extra, sort, name, val, lim, req, mark)
- char *desc, *extra, *sort, *name; long val, lim, req; char *mark; {
- if (SYS_FLOAT_H_WRAP && F && val == req)
- return;
- /* Produce a #define for a signed int type */
- describe(desc, extra);
- printf("#undef %s%s\n", sort, name);
- if (val >= 0) {
- printf("#define %s%s %ld%s\n", sort, name, val, mark);
- } else if (val + lim < 0) {
- /* We may not produce a constant like -1024 if the max
- allowable value is 1023. It has then to be output as
- -1023-1. lim is the max allowable value. */
- printf("#define %s%s (%ld%s%ld%s)\n",
- sort, name, -lim, mark, val+lim, mark);
- } else {
- printf("#define %s%s (%ld%s)\n", sort, name, val, mark);
- }
-#ifdef VERIFY
- if (val != req) {
- printf("%s*** Verify failed for above #define!\n", co);
- printf(" Compiler has %ld for value%s\n\n", req, oc);
- bugs++;
- }
-#endif
- Vprintf("\n");
-}
-
-Procedure u_define(desc, extra, sort, name, val, req, mark)
- char *desc, *extra, *sort, *name; unsigned long val, req; char *mark; {
- /* Produce a #define for an unsigned value */
- describe(desc, extra);
- printf("#undef %s%s\n", sort, name);
- printf("#define %s%s %lu%s%s\n", sort, name, val, U, mark);
-#ifdef VERIFY
- if (val != req) {
- printf("%s*** Verify failed for above #define!\n", co);
- printf(" Compiler has %lu for value%s\n\n", req, oc);
- bugs++;
- }
-#endif
- Vprintf("\n");
-}
-
-Procedure f_define(desc, extra, sort, name, precision, val, req, mark)
- char *desc, *extra, *sort, *name; int precision;
- Long_double val, req; char *mark; {
- if (SYS_FLOAT_H_WRAP && F && val == req)
- return;
- /* Produce a #define for a float/double/long double */
- describe(desc, extra);
- printf ("#undef %s%s\n", sort, name);
- if (stdc) {
-#ifdef NO_LONG_DOUBLE_IO
- static int union_defined = 0;
- if (sizeof(double) != sizeof(Long_double)
- && !strcmp(sort, "LDBL")) {
- if (!union_defined) {
- printf("#ifndef __LDBL_UNION__\n");
- printf("#define __LDBL_UNION__\n");
- printf("union __convert_long_double {\n");
- printf(" unsigned __convert_long_double_i[4];\n");
- printf(" long double __convert_long_double_d;\n");
- printf("};\n");
- printf("#endif\n");
- union_defined = 1;
- }
- printf("#define %s%s %s\n",
- sort, name, fake_f_rep("long double", val));
- } else {
- printf("#define %s%s %s%s\n",
- sort, name, f_rep(precision, val), mark);
- }
-#else
- printf("#define %s%s %s%s\n",
- sort, name, f_rep(precision, val), mark);
-#endif
- } else if (*mark == 'F') {
- /* non-ANSI C has no float constants, so cast the constant */
- printf("#define %s%s ((float)%s)\n",
- sort, name, f_rep(precision, val));
- } else {
- printf("#define %s%s %s\n", sort, name, f_rep(precision, val));
- }
- Vprintf("\n");
-}
-
-int floor_log(base, x) int base; Long_double x; {
- /* return floor(log base(x)) */
- int r=0;
- while (x>=base) { r++; x/=base; }
- return r;
-}
-
-int ceil_log(base, x) int base; Long_double x; {
- int r=0;
- while (x>1.0) { r++; x/=base; }
- return r;
-}
-
-int exponent(x, fract, exp) Long_double x; double *fract; int *exp; {
- /* Split x into a fraction and a power of ten;
- returns 0 if x is unusable, 1 otherwise.
- Only used for error messages about faulty output.
- */
- int r=0, neg=0;
- Long_double old;
- *fract=0.0; *exp=0;
- if (x<0.0) {
- x= -x;
- neg= 1;
- }
- if (x==0.0) return 1;
- if (x>=10.0) {
- while (x>=10.0) {
- old=x; r++; x/=10.0;
- if (old==x) return 0;
- }
- } else {
- while (x<1.0) {
- old=x; r--; x*=10.0;
- if (old==x) return 0;
- }
- }
- if (neg) *fract= (double) -x;
- else *fract=(double) x;
- *exp=r;
- return 1;
-}
-
-/* Print a value of type TYPE with value VAL,
- assuming that sprintf can't handle this type properly (without truncation).
- We create an expression that uses type casting to create the value from
- a bit pattern. */
-
-char *fake_f_rep(type, val) char *type; Long_double val; {
- static char buf[1024];
- union { unsigned int i[4]; Long_double ld;} u;
- u.i[0] = u.i[1] = u.i[2] = u.i[3] = 0;
- u.ld = val;
- sprintf(buf, "(__extension__ ((union __convert_long_double) {__convert_long_double_i: {0x%x, 0x%x, 0x%x, 0x%x}}).__convert_long_double_d)",
- u.i[0], u.i[1], u.i[2], u.i[3]);
- return buf;
-}
-
-char *f_rep(precision, val) int precision; Long_double val; {
- /* Return the floating representation of val */
- static char buf[1024];
-#ifdef NO_LONG_DOUBLE_IO
- if (1)
-#else
- if (sizeof(double) == sizeof(Long_double))
-#endif
- {
- double d = val;
- /* Assume they're the same, and use non-stdc format */
- /* This is for stdc compilers using non-stdc libraries */
- sprintf(buf, "%.*e", precision, d);
- } else {
- /* It had better support Le then */
- sprintf(buf, "%.*Le", precision, val);
- }
- return buf;
-}
-
-Procedure bitpattern(p, size) char *p; unsigned int size; {
- /* Printf the bit-pattern of p */
- char c;
- unsigned int i;
- int j;
-
- for (i=1; i<=size; i++) {
- c= *p;
- p++;
- for (j=bits_per_byte-1; j>=0; j--)
- printf("%c", (c>>j)&1 ? '1' : '0');
- if (i!=size) printf(" ");
- }
-}
-
-#define Order(x, px, mode)\
- printf("%s%s ", co, mode); for (i=0; i<sizeof(x); i++) px[i]= ab[i]; \
- for (i=1; i<=sizeof(x); i++) { c=((x>>(bits_per_byte*(sizeof(x)-i)))&mask);\
- putchar(c==0 ? '?' : (char)c); }\
- printf("%s\n", oc);
-
-Procedure endian(bits_per_byte) int bits_per_byte; {
- /* Printf the byte-order used on this machine */
- /*unsigned*/ short s=0;
- /*unsigned*/ int j=0;
- /*unsigned*/ long l=0;
-
- char *ps= (char *) &s,
- *pj= (char *) &j,
- *pl= (char *) &l,
- *ab= "ABCDEFGHIJKLMNOPQRSTUVWXYZ";
- unsigned int mask, i, c;
-
- mask=0;
- for (i=1; i<=(unsigned)bits_per_byte; i++) mask= (mask<<1)|1;
-
- if (V) {
- printf("%sCHARACTER ORDER%s\n", co, oc);
- Order(s, ps, "short:");
- Order(j, pj, "int: ");
- Order(l, pl, "long: ");
- }
-}
-
-Procedure missing(s) char *s; {
- printf("%s*** #define %s missing from limits.h%s\n", co, s, oc);
- bugs++;
-}
-
-Procedure fmissing(s) char *s; {
- printf("%s*** #define %s missing from float.h%s\n", co, s, oc);
- bugs++;
-}
-
-/* To try and fool optimisers */
-int false() { return 0; }
-
-#define Promoted(x) (false()?(x):(-1))
-#define is_signed(x) (Promoted(x) < 0)
-#define sign_of(x) ((x)?"signed":"unsigned")
-#define Signed 1
-#define Unsigned 0
-#define sgn(x) ((is_signed(x))?Signed:Unsigned)
-
-#define showtype(t, x) Vprintf("%s%s %s %s%s\n", co, t, sign_of(is_signed(x)), type_of(sizeof(x)), oc)
-
-char *type_of(x) int x; {
- if (x == sizeof(char)) {
- if (sizeof(char) == sizeof(int)) return "char/short/int";
- if (sizeof(char) == sizeof(short)) return "char/short";
- return "char";
- }
- if (x == sizeof(short)) {
- if (sizeof(short) == sizeof(int)) return "short/int";
- return "short";
- }
- if (x == sizeof(int)) {
- if (sizeof(int) == sizeof(long)) return "int/long";
- return "int";
- }
- if (x == sizeof(long)) return "long";
- return "unknown-type";
-}
-
-char *ftype_of(x) int x; {
- if (x == sizeof(float)) {
- return "float";
- }
- if (x == sizeof(double)) {
- if (sizeof(double) == sizeof(Long_double))
- return "(long)double";
- return "double";
- }
- if (x == sizeof(Long_double)) {
- return "long double";
- }
- return "unknown-type";
-}
-
-Procedure typerr(name, esign, esize, sign, size)
- char *name; int esign, esize, sign, size;
-{
- Vprintf("*** %s has wrong type: expected %s %s, found %s %s\n",
- name, sign_of(esign), type_of(esize),
- sign_of(sign), type_of(size));
-}
-
-Procedure ftyperr(name, esize, size) char *name; int esize, size; {
- Vprintf("*** %s has wrong type: expected %s, found %s\n",
- name, ftype_of(esize), ftype_of(size));
-}
-
-int promotions() {
- int si = 0; long sl = 0;
- unsigned int ui; unsigned long ul;
- short ss; unsigned short us;
-
- Vprintf("\n%sPROMOTIONS%s\n", co, oc);
-
- if (
- /* Possible warnings here; no problem */
- (sizeof(Promoted(si)) != sizeof(int)) ||
- (sizeof(Promoted(sl)) != sizeof(long)) ||
- (sizeof(Promoted(ss)) != sizeof(int)) ||
- (sizeof(Promoted(ui)) != sizeof(int)) ||
- (sizeof(Promoted(ul)) != sizeof(long)) ||
- (sizeof(Promoted(us)) != sizeof(int)) ||
- is_signed(ui) || is_signed(ul) ||
- !is_signed(si) || !is_signed(sl)
- )
- {
- eek_a_bug("promotions don't work properly in conditional expressions\n");
- }
-
- showtype("unsigned short promotes to", Promoted((unsigned short) 0));
- showtype("long+unsigned gives", sl+ui);
- return 0;
-}
-
-#define checktype(x, n, s, t) if((sgn(x)!=s)||(sizeof(x)!=sizeof(t))) typerr(n, s, sizeof(t), sign_of(x), sizeof(x));
-
-#define fchecktype(x, n, t) if (sizeof(x) != sizeof(t)) ftyperr(n, sizeof(x), sizeof(t));
-
-Procedure check_defines() {
- /* ensure that all #defines are present and have the correct type */
-#ifdef VERIFY
- int usign;
-
-#ifdef NO_UI
- usign= Signed;
-#else
- /* Implementations promote unsigned short differently */
- usign= is_signed((unsigned short) 0);
-#endif
-
- if (L) {
-#ifdef CHAR_BIT
- checktype(CHAR_BIT, "CHAR_BIT", Signed, int);
-#else
- missing("CHAR_BIT");
-#endif
-#ifdef CHAR_MAX
- checktype(CHAR_MAX, "CHAR_MAX", Signed, int);
-#else
- missing("CHAR_MAX");
-#endif
-#ifdef CHAR_MIN
- checktype(CHAR_MIN, "CHAR_MIN", Signed, int);
-#else
- missing("CHAR_MIN");
-#endif
-#ifdef SCHAR_MAX
- checktype(SCHAR_MAX, "SCHAR_MAX", Signed, int);
-#else
- missing("SCHAR_MAX");
-#endif
-#ifdef SCHAR_MIN
- checktype(SCHAR_MIN, "SCHAR_MIN", Signed, int);
-#else
- missing("SCHAR_MIN");
-#endif
-#ifdef UCHAR_MAX
- checktype(UCHAR_MAX, "UCHAR_MAX", Signed, int);
-#else
- missing("UCHAR_MAX");
-#endif
-#ifdef SHRT_MAX
- checktype(SHRT_MAX, "SHRT_MAX", Signed, int);
-#else
- missing("SHRT_MAX");
-#endif
-#ifdef SHRT_MIN
- checktype(SHRT_MIN, "SHRT_MIN", Signed, int);
-#else
- missing("SHRT_MIN");
-#endif
-#ifdef INT_MAX
- checktype(INT_MAX, "INT_MAX", Signed, int);
-#else
- missing("INT_MAX");
-#endif
-#ifdef INT_MIN
- checktype(INT_MIN, "INT_MIN", Signed, int);
-#else
- missing("INT_MIN");
-#endif
-#ifdef LONG_MAX
- checktype(LONG_MAX, "LONG_MAX", Signed, long);
-#else
- missing("LONG_MAX");
-#endif
-#ifdef LONG_MIN
- checktype(LONG_MIN, "LONG_MIN", Signed, long);
-#else
- missing("LONG_MIN");
-#endif
-#ifdef USHRT_MAX
- checktype(USHRT_MAX, "USHRT_MAX", usign, int);
-#else
- missing("USHRT_MAX");
-#endif
-#ifdef UINT_MAX
- checktype(UINT_MAX, "UINT_MAX", Unsigned, int);
-#else
- missing("UINT_MAX");
-#endif
-#ifdef ULONG_MAX
- checktype(ULONG_MAX, "ULONG_MAX", Unsigned, long);
-#else
- missing("ULONG_MAX");
-#endif
- } /* if (L) */
-
- if (F) {
-#ifdef FLT_RADIX
- checktype(FLT_RADIX, "FLT_RADIX", Signed, int);
-#else
- fmissing("FLT_RADIX");
-#endif
-#ifdef FLT_MANT_DIG
- checktype(FLT_MANT_DIG, "FLT_MANT_DIG", Signed, int);
-#else
- fmissing("FLT_MANT_DIG");
-#endif
-#ifdef FLT_DIG
- checktype(FLT_DIG, "FLT_DIG", Signed, int);
-#else
- fmissing("FLT_DIG");
-#endif
-#ifdef FLT_ROUNDS
- checktype(FLT_ROUNDS, "FLT_ROUNDS", Signed, int);
-#else
- fmissing("FLT_ROUNDS");
-#endif
-#ifdef FLT_EPSILON
- fchecktype(FLT_EPSILON, "FLT_EPSILON", float);
-#else
- fmissing("FLT_EPSILON");
-#endif
-#ifdef FLT_MIN_EXP
- checktype(FLT_MIN_EXP, "FLT_MIN_EXP", Signed, int);
-#else
- fmissing("FLT_MIN_EXP");
-#endif
-#ifdef FLT_MIN
- fchecktype(FLT_MIN, "FLT_MIN", float);
-#else
- fmissing("FLT_MIN");
-#endif
-#ifdef FLT_MIN_10_EXP
- checktype(FLT_MIN_10_EXP, "FLT_MIN_10_EXP", Signed, int);
-#else
- fmissing("FLT_MIN_10_EXP");
-#endif
-#ifdef FLT_MAX_EXP
- checktype(FLT_MAX_EXP, "FLT_MAX_EXP", Signed, int);
-#else
- fmissing("FLT_MAX_EXP");
-#endif
-#ifdef FLT_MAX
- fchecktype(FLT_MAX, "FLT_MAX", float);
-#else
- fmissing("FLT_MAX");
-#endif
-#ifdef FLT_MAX_10_EXP
- checktype(FLT_MAX_10_EXP, "FLT_MAX_10_EXP", Signed, int);
-#else
- fmissing("FLT_MAX_10_EXP");
-#endif
-#ifdef DBL_MANT_DIG
- checktype(DBL_MANT_DIG, "DBL_MANT_DIG", Signed, int);
-#else
- fmissing("DBL_MANT_DIG");
-#endif
-#ifdef DBL_DIG
- checktype(DBL_DIG, "DBL_DIG", Signed, int);
-#else
- fmissing("DBL_DIG");
-#endif
-#ifdef DBL_EPSILON
- fchecktype(DBL_EPSILON, "DBL_EPSILON", double);
-#else
- fmissing("DBL_EPSILON");
-#endif
-#ifdef DBL_MIN_EXP
- checktype(DBL_MIN_EXP, "DBL_MIN_EXP", Signed, int);
-#else
- fmissing("DBL_MIN_EXP");
-#endif
-#ifdef DBL_MIN
- fchecktype(DBL_MIN, "DBL_MIN", double);
-#else
- fmissing("DBL_MIN");
-#endif
-#ifdef DBL_MIN_10_EXP
- checktype(DBL_MIN_10_EXP, "DBL_MIN_10_EXP", Signed, int);
-#else
- fmissing("DBL_MIN_10_EXP");
-#endif
-#ifdef DBL_MAX_EXP
- checktype(DBL_MAX_EXP, "DBL_MAX_EXP", Signed, int);
-#else
- fmissing("DBL_MAX_EXP");
-#endif
-#ifdef DBL_MAX
- fchecktype(DBL_MAX, "DBL_MAX", double);
-#else
- fmissing("DBL_MAX");
-#endif
-#ifdef DBL_MAX_10_EXP
- checktype(DBL_MAX_10_EXP, "DBL_MAX_10_EXP", Signed, int);
-#else
- fmissing("DBL_MAX_10_EXP");
-#endif
-#ifdef STDC
-#ifdef LDBL_MANT_DIG
- checktype(LDBL_MANT_DIG, "LDBL_MANT_DIG", Signed, int);
-#else
- fmissing("LDBL_MANT_DIG");
-#endif
-#ifdef LDBL_DIG
- checktype(LDBL_DIG, "LDBL_DIG", Signed, int);
-#else
- fmissing("LDBL_DIG");
-#endif
-#ifdef LDBL_EPSILON
- fchecktype(LDBL_EPSILON, "LDBL_EPSILON", long double);
-#else
- fmissing("LDBL_EPSILON");
-#endif
-#ifdef LDBL_MIN_EXP
- checktype(LDBL_MIN_EXP, "LDBL_MIN_EXP", Signed, int);
-#else
- fmissing("LDBL_MIN_EXP");
-#endif
-#ifdef LDBL_MIN
- fchecktype(LDBL_MIN, "LDBL_MIN", long double);
-#else
- fmissing("LDBL_MIN");
-#endif
-#ifdef LDBL_MIN_10_EXP
- checktype(LDBL_MIN_10_EXP, "LDBL_MIN_10_EXP", Signed, int);
-#else
- fmissing("LDBL_MIN_10_EXP");
-#endif
-#ifdef LDBL_MAX_EXP
- checktype(LDBL_MAX_EXP, "LDBL_MAX_EXP", Signed, int);
-#else
- fmissing("LDBL_MAX_EXP");
-#endif
-#ifdef LDBL_MAX
- fchecktype(LDBL_MAX, "LDBL_MAX", long double);
-#else
- fmissing("LDBL_MAX");
-#endif
-#ifdef LDBL_MAX_10_EXP
- checktype(LDBL_MAX_10_EXP, "LDBL_MAX_10_EXP", Signed, int);
-#else
- fmissing("LDBL_MAX_10_EXP");
-#endif
-#endif /* STDC */
- } /* if (F) */
-#endif /* VERIFY */
-}
-
-#ifdef VERIFY
-#ifndef SCHAR_MAX
-#define SCHAR_MAX char_max
-#endif
-#ifndef SCHAR_MIN
-#define SCHAR_MIN char_min
-#endif
-#ifndef UCHAR_MAX
-#define UCHAR_MAX char_max
-#endif
-#endif /* VERIFY */
-
-#ifndef CHAR_BIT
-#define CHAR_BIT char_bit
-#endif
-#ifndef CHAR_MAX
-#define CHAR_MAX char_max
-#endif
-#ifndef CHAR_MIN
-#define CHAR_MIN char_min
-#endif
-#ifndef SCHAR_MAX
-#define SCHAR_MAX char_max
-#endif
-#ifndef SCHAR_MIN
-#define SCHAR_MIN char_min
-#endif
-#ifndef UCHAR_MAX
-#define UCHAR_MAX char_max
-#endif
-
-int cprop() {
- /* Properties of type char */
- Volatile char c, char_max, char_min;
- Volatile int bits_per_byte, c_signed;
- long char_bit;
-
- Unexpected(2);
-
- /* Calculate number of bits per character *************************/
- c=1; bits_per_byte=0;
- do { c=c<<1; bits_per_byte++; } while(c!=0);
- c= (char)(-1);
- if (((int)c)<0) c_signed=1;
- else c_signed=0;
- Vprintf("%schar = %d bits, %ssigned%s\n",
- co, (int)sizeof(c)*bits_per_byte, (c_signed?"":"un"), oc);
- char_bit=(long)(sizeof(c)*bits_per_byte);
- if (L) i_define(D_CHAR_BIT, "", "CHAR", "_BIT",
- char_bit, 0L, (long) CHAR_BIT, "");
-
- c=0; char_max=0;
- c++;
- if (bits_per_byte <= 16) {
- if (setjmp(lab)==0) { /* Yields char_max */
- while (c>char_max) {
- char_max=c;
- c++;
- }
- } else {
- Vprintf("%sCharacter overflow generates a trap!%s\n",
- co, oc);
- }
- c=0; char_min=0;
- c--;
- if (setjmp(lab)==0) { /* Yields char_min */
- while (c<char_min) {
- char_min=c;
- c--;
- }
- }
- } else {
- /* An exhaustive search here is impracticable ;-) */
- c = (1 << (bits_per_byte - 1)) - 1;
- char_max = c;
- c++;
- if (c > char_max)
- char_max = ~0;
- c = 0;
- char_min = 0;
- c--;
- if (c < char_min) {
- c = (1 << (bits_per_byte - 1)) - 1;
- c = -c;
- char_min = c;
- c--;
- if (c < char_min)
- char_min = c;
- }
- }
- if (c_signed && char_min == 0) {
- Vprintf("%sBEWARE! Chars are pseudo-unsigned:%s\n", co, oc);
- Vprintf("%s %s%s%s\n",
- "They contain only nonnegative values, ",
- "but sign extend when used as integers.", co, oc);
- }
- Unexpected(3);
-
- if (L) {
- /* Because of the integer promotions, you must use a U after
- the MAX_CHARS in the following cases */
- if ((sizeof(char) == sizeof(int)) && !c_signed) {
- u_define(D_CHAR_MAX, "", "CHAR", "_MAX",
- (long) char_max,
- (long) CHAR_MAX, "");
- } else {
- i_define(D_CHAR_MAX, "", "CHAR", "_MAX",
- (long) char_max, 0L,
- (long) CHAR_MAX, "");
- }
- i_define(D_CHAR_MIN, "", "CHAR", "_MIN",
- (long) char_min, (long) maxint,
- (long) CHAR_MIN, "");
- if (c_signed) {
- i_define(D_SCHAR_MAX, "", "SCHAR", "_MAX",
- (long) char_max, 0L,
- (long) SCHAR_MAX, "");
- i_define(D_SCHAR_MIN, "", "SCHAR", "_MIN",
- (long) char_min, (long) maxint,
- (long) SCHAR_MIN, "");
- } else {
- if (sizeof(char) == sizeof(int)) {
- u_define(D_UCHAR_MAX, "", "UCHAR", "_MAX",
- (long) char_max,
- (long) UCHAR_MAX, "");
- } else {
- i_define(D_UCHAR_MAX, "", "UCHAR", "_MAX",
- (long) char_max, 0L,
- (long) UCHAR_MAX, "");
- }
- }
-
- if (c_signed) {
-#ifndef NO_UC
- Volatile unsigned char c, char_max;
- c=0; char_max=0;
- c++;
- if (setjmp(lab)==0) { /* Yields char_max */
- while (c>char_max) {
- char_max=c;
- c++;
- }
- }
- Unexpected(4);
- if (sizeof(char) == sizeof(int)) {
- u_define(D_UCHAR_MAX, "", "UCHAR", "_MAX",
- (long) char_max,
- (long) UCHAR_MAX, "");
- } else {
- i_define(D_UCHAR_MAX, "", "UCHAR", "_MAX",
- (long) char_max, 0L,
- (long) UCHAR_MAX, "");
- }
-#endif
- } else {
-#ifndef NO_SC
-/* Define NO_SC if this gives a syntax error */ Volatile signed char c, char_max, char_min;
- c=0; char_max=0;
- c++;
- if (setjmp(lab)==0) { /* Yields char_max */
- while (c>char_max) {
- char_max=c;
- c++;
- }
- }
- c=0; char_min=0;
- c--;
- if (setjmp(lab)==0) { /* Yields char_min */
- while (c<char_min) {
- char_min=c;
- c--;
- }
- }
- Unexpected(5);
- i_define(D_SCHAR_MIN, "", "SCHAR", "_MIN",
- (long) char_min, (long) maxint,
- (long) SCHAR_MIN, "");
- i_define(D_SCHAR_MAX, "", "SCHAR", "_MAX",
- (long) char_max, 0L,
- (long) SCHAR_MAX, "");
-#endif /* NO_SC */
- }
- }
- return bits_per_byte;
-}
-
-int basic() {
- /* The properties of the basic types.
- Returns number of bits per sizeof unit */
- Volatile int bits_per_byte;
- typedef int function ();
- int variable;
- int *p, *q;
-
- Vprintf("%sSIZES%s\n", co, oc);
- bits_per_byte= cprop();
-
- /* Shorts, ints and longs *****************************************/
- Vprintf("%sshort=%d int=%d long=%d float=%d double=%d bits %s\n",
- co,
- (int) sizeof(short)*bits_per_byte,
- (int) sizeof(int)*bits_per_byte,
- (int) sizeof(long)*bits_per_byte,
- (int) sizeof(float)*bits_per_byte,
- (int) sizeof(double)*bits_per_byte, oc);
- if (stdc) {
- Vprintf("%slong double=%d bits%s\n",
- co, (int) sizeof(Long_double)*bits_per_byte, oc);
- }
- Vprintf("%schar*=%d bits%s%s\n",
- co, (int)sizeof(char *)*bits_per_byte,
- sizeof(char *)>sizeof(int)?" BEWARE! larger than int!":"",
- oc);
- Vprintf("%sint* =%d bits%s%s\n",
- co, (int)sizeof(int *)*bits_per_byte,
- sizeof(int *)>sizeof(int)?" BEWARE! larger than int!":"",
- oc);
- Vprintf("%sfunc*=%d bits%s%s\n",
- co, (int)sizeof(function *)*bits_per_byte,
- sizeof(function *)>sizeof(int)?" BEWARE! larger than int!":"",
- oc);
-if (V) printf ("%s%s %s %s%s\n", co, "Type size_t is",
- ((((false()?( sizeof(int)):(-1)) < 0) )?
- "signed":"unsigned") ,
- type_of(sizeof(
- sizeof(int)+0
- )
- ),
- oc);
- showtype("Type size_t is", sizeof(0));
-
- /* Alignment constants ********************************************/
-
-#define alignment(TYPE) \
- ((long)((char *)&((struct{char c; TYPE d;}*)0)->d - (char *) 0))
-
- Vprintf("\n%sALIGNMENTS%s\n", co, oc);
-
- Vprintf("%schar=%ld short=%ld int=%ld long=%ld%s\n",
- co,
- alignment(char), alignment(short),
- alignment(int), alignment(long),
- oc);
-
- Vprintf("%sfloat=%ld double=%ld%s\n",
- co,
- alignment(float), alignment(double),
- oc);
-
- if (stdc) {
- Vprintf("%slong double=%ld%s\n",
- co,
- alignment(Long_double),
- oc);
- }
- Vprintf("%schar*=%ld int*=%ld func*=%ld%s\n",
- co,
- alignment(char *), alignment(int *), alignment(function *),
- oc);
-
- Vprintf("\n");
-
- /* Ten little endians *********************************************/
-
- endian(bits_per_byte);
-
- /* Pointers *******************************************************/
-
- Vprintf("\n%sPROPERTIES OF POINTERS%s\n", co, oc);
-
- if ((long) (char *) &variable == (long) (int *) &variable) {
- Vprintf("%sChar and int pointer formats seem identical%s\n",
- co, oc);
- } else {
- Vprintf("%sChar and int pointer formats are different%s\n",
- co, oc);
- }
- if ((long) (char *) &variable == (long) (function *) &variable) {
- Vprintf("%sChar and function pointer formats seem identical%s\n",
- co, oc);
- } else {
- Vprintf("%sChar and function pointer formats are different%s\n",
- co, oc);
- }
-
- if (V) {
- if ("abcd"=="abcd")
- printf("%sStrings are shared%s\n", co, oc);
- else printf("%sStrings are not shared%s\n", co, oc);
- }
-
- p=0; q=0;
- showtype("Type ptrdiff_t is", p-q);
-
- Vprintf("\n%sPROPERTIES OF INTEGRAL TYPES%s\n", co, oc);
-
- sprop();
- iprop();
- lprop();
- usprop();
- uiprop();
- ulprop();
-
- promotions();
-
- Unexpected(6);
-
- return bits_per_byte;
-}
-
-#else /* not PASS0 */
-
-#ifdef SEP
-extern jmp_buf lab;
-extern int V, L, F, bugs, bits_per_byte;
-extern char co[], oc[];
-extern char *f_rep();
-#endif /* SEP */
-#endif /* ifdef PASS0 */
-
-/* As I said, I apologise for the contortions below. The functions are
- expanded by the preprocessor twice or three times (for float and double,
- and maybe for long double, and for short, int and long). That way,
- I never make a change to one that I forget to make to the other.
- You can look on it as C's fault for not supporting multi-line macro's.
- This whole file is read 3 times by the preprocessor, with PASSn set for
- n=1, 2 or 3, to decide which parts to reprocess.
-*/
-
-/* #undef on an already undefined thing is (wrongly) flagged as an error
- by some compilers, therefore the #ifdef that follows:
-*/
-#ifdef Number
-#undef Number
-#undef THING
-#undef Thing
-#undef thing
-#undef FPROP
-#undef Fname
-#undef Store
-#undef Sum
-#undef Diff
-#undef Mul
-#undef Div
-#undef ZERO
-#undef HALF
-#undef ONE
-#undef TWO
-#undef THREE
-#undef FOUR
-#undef Self
-#undef F_check
-#undef Validate
-#undef EPROP
-#undef MARK
-
-/* These are the float.h constants */
-#undef F_RADIX
-#undef F_MANT_DIG
-#undef F_DIG
-#undef F_ROUNDS
-#undef F_EPSILON
-#undef F_MIN_EXP
-#undef F_MIN
-#undef F_MIN_10_EXP
-#undef F_MAX_EXP
-#undef F_MAX
-#undef F_MAX_10_EXP
-#endif
-
-#ifdef Integer
-#undef Integer
-#undef INT
-#undef IPROP
-#undef Iname
-#undef UPROP
-#undef Uname
-#undef OK_UI
-#undef IMARK
-
-#undef I_MAX
-#undef I_MIN
-#undef U_MAX
-#endif
-
-#ifdef PASS1
-
-/* Define the things we're going to use this pass */
-
-#define Number float
-#define THING "FLOAT"
-#define Thing "Float"
-#define thing "float"
-#define Fname "FLT"
-#define FPROP fprop
-#define Store fStore
-#define Sum fSum
-#define Diff fDiff
-#define Mul fMul
-#define Div fDiv
-#define ZERO 0.0
-#define HALF 0.5
-#define ONE 1.0
-#define TWO 2.0
-#define THREE 3.0
-#define FOUR 4.0
-#define Self fSelf
-#define F_check fCheck
-#define MARK "F"
-#ifdef VERIFY
-#define Validate(prec, val, req, same) fValidate(prec, val, req, same)
-#endif
-
-#define EPROP efprop
-
-#define Integer short
-#define INT "short"
-#define IPROP sprop
-#define Iname "SHRT"
-#ifndef NO_UI
-#define OK_UI 1
-#endif
-#define IMARK ""
-
-#define UPROP usprop
-#define Uname "USHRT"
-
-#ifdef SHRT_MAX
-#define I_MAX SHRT_MAX
-#endif
-#ifdef SHRT_MIN
-#define I_MIN SHRT_MIN
-#endif
-#ifdef USHRT_MAX
-#define U_MAX USHRT_MAX
-#endif
-
-#ifdef FLT_RADIX
-#define F_RADIX FLT_RADIX
-#endif
-#ifdef FLT_MANT_DIG
-#define F_MANT_DIG FLT_MANT_DIG
-#endif
-#ifdef FLT_DIG
-#define F_DIG FLT_DIG
-#endif
-#ifdef FLT_ROUNDS
-#define F_ROUNDS FLT_ROUNDS
-#endif
-#ifdef FLT_EPSILON
-#define F_EPSILON FLT_EPSILON
-#endif
-#ifdef FLT_MIN_EXP
-#define F_MIN_EXP FLT_MIN_EXP
-#endif
-#ifdef FLT_MIN
-#define F_MIN FLT_MIN
-#endif
-#ifdef FLT_MIN_10_EXP
-#define F_MIN_10_EXP FLT_MIN_10_EXP
-#endif
-#ifdef FLT_MAX_EXP
-#define F_MAX_EXP FLT_MAX_EXP
-#endif
-#ifdef FLT_MAX
-#define F_MAX FLT_MAX
-#endif
-#ifdef FLT_MAX_10_EXP
-#define F_MAX_10_EXP FLT_MAX_10_EXP
-#endif
-
-#endif /* PASS1 */
-
-#ifdef PASS2
-
-#define Number double
-#define THING "DOUBLE"
-#define Thing "Double"
-#define thing "double"
-#define Fname "DBL"
-#define FPROP dprop
-#define Store dStore
-#define Sum dSum
-#define Diff dDiff
-#define Mul dMul
-#define Div dDiv
-#define ZERO 0.0
-#define HALF 0.5
-#define ONE 1.0
-#define TWO 2.0
-#define THREE 3.0
-#define FOUR 4.0
-#define Self dSelf
-#define F_check dCheck
-#define MARK ""
-#ifdef VERIFY
-#define Validate(prec, val, req, same) dValidate(prec, val, req, same)
-#endif
-
-#define EPROP edprop
-
-#define Integer int
-#define INT "int"
-#define IPROP iprop
-#define Iname "INT"
-#define OK_UI 1 /* Unsigned int is always possible */
-#define IMARK ""
-
-#define UPROP uiprop
-#define Uname "UINT"
-
-#ifdef INT_MAX
-#define I_MAX INT_MAX
-#endif
-#ifdef INT_MIN
-#define I_MIN INT_MIN
-#endif
-#ifdef UINT_MAX
-#define U_MAX UINT_MAX
-#endif
-
-#ifdef DBL_MANT_DIG
-#define F_MANT_DIG DBL_MANT_DIG
-#endif
-#ifdef DBL_DIG
-#define F_DIG DBL_DIG
-#endif
-#ifdef DBL_EPSILON
-#define F_EPSILON DBL_EPSILON
-#endif
-#ifdef DBL_MIN_EXP
-#define F_MIN_EXP DBL_MIN_EXP
-#endif
-#ifdef DBL_MIN
-#define F_MIN DBL_MIN
-#endif
-#ifdef DBL_MIN_10_EXP
-#define F_MIN_10_EXP DBL_MIN_10_EXP
-#endif
-#ifdef DBL_MAX_EXP
-#define F_MAX_EXP DBL_MAX_EXP
-#endif
-#ifdef DBL_MAX
-#define F_MAX DBL_MAX
-#endif
-#ifdef DBL_MAX_10_EXP
-#define F_MAX_10_EXP DBL_MAX_10_EXP
-#endif
-
-#endif /* PASS2 */
-
-#ifdef PASS3
-
-#ifdef STDC
-#define Number long double
-
-#define ZERO 0.0L
-#define HALF 0.5L
-#define ONE 1.0L
-#define TWO 2.0L
-#define THREE 3.0L
-#define FOUR 4.0L
-#endif
-
-#define THING "LONG DOUBLE"
-#define Thing "Long double"
-#define thing "long double"
-#define Fname "LDBL"
-#define FPROP ldprop
-#define Store ldStore
-#define Sum ldSum
-#define Diff ldDiff
-#define Mul ldMul
-#define Div ldDiv
-#define Self ldSelf
-#define F_check ldCheck
-#define MARK "L"
-#ifdef VERIFY
-#define Validate(prec, val, req, same) ldValidate(prec, val, req, same)
-#endif
-
-#define EPROP eldprop
-
-#define Integer long
-#define INT "long"
-#define IPROP lprop
-#define Iname "LONG"
-#ifndef NO_UI
-#define OK_UI 1
-#endif
-#define IMARK "L"
-
-#define UPROP ulprop
-#define Uname "ULONG"
-
-#ifdef LONG_MAX
-#define I_MAX LONG_MAX
-#endif
-#ifdef LONG_MIN
-#define I_MIN LONG_MIN
-#endif
-#ifdef ULONG_MAX
-#define U_MAX ULONG_MAX
-#endif
-
-#ifdef LDBL_MANT_DIG
-#define F_MANT_DIG LDBL_MANT_DIG
-#endif
-#ifdef LDBL_DIG
-#define F_DIG LDBL_DIG
-#endif
-#ifdef LDBL_EPSILON
-#define F_EPSILON LDBL_EPSILON
-#endif
-#ifdef LDBL_MIN_EXP
-#define F_MIN_EXP LDBL_MIN_EXP
-#endif
-#ifdef LDBL_MIN
-#define F_MIN LDBL_MIN
-#endif
-#ifdef LDBL_MIN_10_EXP
-#define F_MIN_10_EXP LDBL_MIN_10_EXP
-#endif
-#ifdef LDBL_MAX_EXP
-#define F_MAX_EXP LDBL_MAX_EXP
-#endif
-#ifdef LDBL_MAX
-#define F_MAX LDBL_MAX
-#endif
-#ifdef LDBL_MAX_10_EXP
-#define F_MAX_10_EXP LDBL_MAX_10_EXP
-#endif
-
-#endif /* PASS3 */
-
-#define UNDEFINED (-2)
-
-#ifndef I_MAX
-#define I_MAX ((unsigned long) UNDEFINED)
-#endif
-#ifndef I_MIN
-#define I_MIN ((unsigned long) UNDEFINED)
-#endif
-#ifndef U_MAX
-#define U_MAX ((unsigned long) UNDEFINED)
-#endif
-
-#ifndef F_RADIX
-#define F_RADIX UNDEFINED
-#endif
-#ifndef F_MANT_DIG
-#define F_MANT_DIG UNDEFINED
-#endif
-#ifndef F_DIG
-#define F_DIG UNDEFINED
-#endif
-#ifndef F_ROUNDS
-#define F_ROUNDS UNDEFINED
-#endif
-#ifndef F_EPSILON
-#define F_EPSILON ((Number) UNDEFINED)
-#endif
-#ifndef F_MIN_EXP
-#define F_MIN_EXP UNDEFINED
-#endif
-#ifndef F_MIN
-#define F_MIN ((Number) UNDEFINED)
-#endif
-#ifndef F_MIN_10_EXP
-#define F_MIN_10_EXP UNDEFINED
-#endif
-#ifndef F_MAX_EXP
-#define F_MAX_EXP UNDEFINED
-#endif
-#ifndef F_MAX
-#define F_MAX ((Number) UNDEFINED)
-#endif
-#ifndef F_MAX_10_EXP
-#define F_MAX_10_EXP UNDEFINED
-#endif
-
-#ifndef VERIFY
-#define Validate(prec, val, req, same) {;}
-#endif
-
-#ifdef Integer
-
-Procedure IPROP() {
- /* the properties of short, int, and long */
- Volatile Integer newi, int_max, maxeri, int_min, minneri;
- Volatile int ibits, ipower, two=2;
-
- /* Calculate max short/int/long ***********************************/
- /* Calculate 2**n-1 until overflow - then use the previous value */
-
- newi=1; int_max=0;
-
- if (setjmp(lab)==0) { /* Yields int_max */
- for(ipower=0; newi>int_max; ipower++) {
- int_max=newi;
- newi=newi*two+1;
- }
- Vprintf("%sOverflow of a%s %s does not generate a trap%s\n",
- co, INT[0]=='i'?"n":"", INT, oc);
- } else {
- Vprintf("%sOverflow of a%s %s generates a trap%s\n",
- co, INT[0]=='i'?"n":"", INT, oc);
- }
- Unexpected(7);
-
- /* Minimum value: assume either two's or one's complement *********/
- int_min= -int_max;
- if (setjmp(lab)==0) { /* Yields int_min */
- if (int_min-1 < int_min) int_min--;
- }
- Unexpected(8);
-
- /* Now for those daft Cybers */
-
- maxeri=0; newi=int_max;
-
- if (setjmp(lab)==0) { /* Yields maxeri */
- for(ibits=ipower; newi>maxeri; ibits++) {
- maxeri=newi;
- newi=newi+newi+1;
- }
- }
- Unexpected(9);
-
- minneri= -maxeri;
- if (setjmp(lab)==0) { /* Yields minneri */
- if (minneri-1 < minneri) minneri--;
- }
- Unexpected(10);
-
- Vprintf("%sMaximum %s = %ld (= 2**%d-1)%s\n",
- co, INT, (long)int_max, ipower, oc);
- Vprintf("%sMinimum %s = %ld%s\n", co, INT, (long)int_min, oc);
-
- if (L) i_define(D_INT_MAX, INT, Iname, "_MAX",
- (long) int_max, 0L,
- (long) I_MAX, IMARK);
- if (L) i_define(D_INT_MIN, INT, Iname, "_MIN",
- (long) int_min, (long) (PASS==1?maxint:int_max),
- (long) I_MIN, IMARK);
-
- if(int_max < 0) { /* It has happened */
- eek_a_bug("signed integral comparison faulty?");
- }
-
- if (maxeri>int_max) {
- Vprintf("%sThere is a larger %s, %ld (= 2**%d-1), %s %s%s\n",
- co, INT, (long)maxeri, ibits,
- "but only for addition, not multiplication",
- "(I smell a Cyber!)",
- oc);
- }
-
- if (minneri<int_min) {
- Vprintf("%sThere is a smaller %s, %ld, %s %s%s\n",
- co, INT, (long)minneri,
- "but only for addition, not multiplication",
- "(I smell a Cyber!)",
- oc);
- }
-}
-
-Procedure UPROP () {
- /* The properties of unsigned short/int/long */
-#ifdef OK_UI
- Volatile unsigned Integer u_max, newi, two;
- newi=1; u_max=0; two=2;
-
- if (setjmp(lab)==0) { /* Yields u_max */
- while(newi>u_max) {
- u_max=newi;
- newi=newi*two+1;
- }
- }
- Unexpected(11);
- Vprintf("%sMaximum unsigned %s = %lu%s\n",
- co, INT, (unsigned long) u_max, oc);
-
- /* Oh woe: new standard C defines value preserving promotions */
- if (L) {
- if (PASS == 1 && sizeof(short) < sizeof(int)) {
- /* Special only for short */
- i_define(D_UINT_MAX, INT, Uname, "_MAX",
- (unsigned long) u_max, 0L,
- (unsigned long) U_MAX, IMARK);
- } else {
- u_define(D_UINT_MAX, INT, Uname, "_MAX",
- (unsigned long) u_max,
- (unsigned long) U_MAX, IMARK);
- }
- }
-#endif
-}
-
-#endif /* Integer */
-
-#ifdef Number
-
-/* The following routines are intended to defeat any attempt at optimisation
- or use of extended precision, and to defeat faulty narrowing casts.
- The weird prototypes are because of widening incompatibilities.
-*/
-#ifdef STDC
-#define ARGS1(atype, a) (atype a)
-#define ARGS2(atype, a, btype, b) (atype a, btype b)
-#else
-#define ARGS1(atype, a) (a) atype a;
-#define ARGS2(atype, a, btype, b) (a, b) atype a; btype b;
-#endif
-
-Procedure Store ARGS2(Number, a, Number *, b) { *b=a; }
-Number Sum ARGS2(Number, a, Number, b) {Number r; Store(a+b, &r); return (r); }
-Number Diff ARGS2(Number, a, Number, b){Number r; Store(a-b, &r); return (r); }
-Number Mul ARGS2(Number, a, Number, b) {Number r; Store(a*b, &r); return (r); }
-Number Div ARGS2(Number, a, Number, b) {Number r; Store(a/b, &r); return (r); }
-Number Self ARGS1(Number, a) {Number r; Store(a, &r); return (r); }
-
-Procedure F_check ARGS((int precision, Long_double val1));
-
-Procedure F_check(precision, val1) int precision; Long_double val1; {
- /* You don't think I'm going to go to all the trouble of writing
- a program that works out what all sorts of values are, only to
- have printf go and print the wrong values out, do you?
- No, you're right, so this function tries to see if printf
- has written the right value, by reading it back again.
- This introduces a new problem of course: suppose printf writes
- the correct value, and scanf reads it back wrong... oh well.
- But I'm adamant about this: the precision given is enough
- to uniquely identify the printed number, therefore I insist
- that sscanf read the number back identically. Harsh yes, but
- sometimes you've got to be cruel to be kind.
- */
- Number val, new, diff;
- double rem;
- int e;
- char *rep;
- char *f2;
-
-#ifdef NO_LONG_DOUBLE_IO
- double new1;
- /* On the Sun 3, sscanf clobbers 4 words,
- which leads to a crash when this function tries to return. */
- f2= "%le"; /* Input */
- /* It is no use checking long doubles if we can't
- read and write them. */
- if (sizeof (Number) > sizeof(double))
- return;
-#else
- Long_double new1;
- if (sizeof(double) == sizeof(Long_double)) {
- /* Assume they're the same, and use non-stdc format */
- /* This is for stdc compilers using non-stdc libraries */
- f2= "%le"; /* Input */
- } else {
- /* It had better support Le then */
- f2= "%Le";
- }
-#endif
- val= val1;
- rep= f_rep(precision, (Long_double) val);
- if (setjmp(lab)==0) {
- sscanf(rep, f2, &new1);
- } else {
- eek_a_bug("sscanf caused a trap");
- printf("%s scanning: %s format: %s%s\n\n", co, rep, f2, oc);
- Unexpected(12);
- return;
- }
-
- if (setjmp(lab)==0) { /* See if new is usable */
- new= new1;
- if (new != 0.0) {
- diff= val/new - 1.0;
- if (diff < 0.1) diff= 1.0;
- /* That should be enough to generate a trap */
- }
- } else {
- eek_a_bug("sscanf returned an unusable number");
- printf("%s scanning: %s with format: %s%s\n\n",
- co, rep, f2, oc);
- Unexpected(13);
- return;
- }
-
- Unexpected(14);
- if (new != val) {
- eek_a_bug("Possibly bad output from printf above");
- if (!exponent((Long_double)val, &rem, &e)) {
- printf("%s but value was an unusable number%s\n\n",
- co, oc);
- return;
- }
- printf("%s expected value around %.*fe%d, bit pattern:\n ",
- co, precision, rem, e);
- bitpattern((char *) &val, (unsigned)sizeof(val));
- printf ("%s\n", oc);
- printf("%s sscanf gave %s, bit pattern:\n ",
- co, f_rep(precision, (Long_double) new));
- bitpattern((char *) &new, (unsigned)sizeof(new));
- printf ("%s\n", oc);
- if (setjmp(lab) == 0) {
- diff= val-new;
- printf("%s difference= %s%s\n\n",
- co, f_rep(precision, (Long_double) diff), oc);
- } /* else forget it */
- Unexpected(15);
- }
-}
-
-#ifdef VERIFY
-Procedure Validate(prec, val, req, same) int prec, same; Long_double val, req; {
- /* Check that the compiler has read a #define value correctly */
- Unexpected(16);
- if (!same) {
- printf("%s*** Verify failed for above #define!\n", co);
- if (setjmp(lab) == 0) { /* for the case that req == nan */
- printf(" Compiler has %s for value%s\n",
- f_rep(prec, req), oc);
- } else {
- printf(" Compiler has %s for value%s\n",
- "an unusable number", oc);
- }
- if (setjmp(lab) == 0) {
- F_check(prec, (Long_double) req);
- } /*else forget it*/
- if (setjmp(lab) == 0) {
- if (req > 0.0 && val > 0.0) {
- printf("%s difference= %s%s\n",
- co, f_rep(prec, val-req), oc);
- }
- } /*else forget it*/
- Unexpected(17);
- printf("\n");
- bugs++;
- } else if (val != req) {
- if (stdc) eek_a_bug("constant has the wrong precision");
- else eek_a_bug("the cast didn't work");
- printf("\n");
- }
-}
-#endif /* VERIFY */
-
-int FPROP(bits_per_byte) int bits_per_byte; {
- /* Properties of floating types, using algorithms by Cody and Waite
- from MA Malcolm, as modified by WM Gentleman and SB Marovich.
- Further extended by S Pemberton.
-
- Returns the number of digits in the fraction.
- */
-
- Volatile int
- i, f_radix, iexp, irnd, mrnd, f_rounds, f_mant_dig,
- iz, k, inf, machep, f_max_exp, f_min_exp, mx, negeps,
- mantbits, digs, f_dig, trap,
- hidden, normal, f_min_10_exp, f_max_10_exp;
- Volatile Number
- a, b, base, basein, basem1, f_epsilon, epsneg,
- eps, epsp1, etop, ebot,
- f_max, newxmax, f_min, xminner, y, y1, z, z1, z2;
-
- Unexpected(18);
-
- Vprintf("%sPROPERTIES OF %s%s\n", co, THING, oc);
-
- /* Base and size of significand **************************************/
- /* First repeatedly double until adding 1 has no effect. */
- /* For instance, if base is 10, with 3 significant digits */
- /* it will try 1, 2, 4, 8, ... 512, 1024, and stop there, */
- /* since 1024 is only representable as 1020. */
- a=1.0;
- if (setjmp(lab)==0) { /* inexact trap? */
- do { a=Sum(a, a); }
- while (Diff(Diff(Sum(a, ONE), a), ONE) == ZERO);
- } else {
- fprintf(stderr, "*** Program got loss-of-precision trap!\n");
- /* And supporting those is just TOO much trouble! */
- farewell(bugs+1);
- }
- Unexpected(19);
- /* Now double until you find a number that can be added to the */
- /* above number. For 1020 this is 8 or 16, depending whether the */
- /* result is rounded or truncated. */
- /* In either case the result is 1030. 1030-1020= the base, 10. */
- b=1.0;
- do { b=Sum(b, b); } while ((base=Diff(Sum(a, b), a)) == ZERO);
- f_radix=base;
- Vprintf("%sBase = %d%s\n", co, f_radix, oc);
-
- /* Sanity check; if base<2, I can't guarantee the rest will work */
- if (f_radix < 2) {
- eek_a_bug("Function return or parameter passing faulty? (This is a guess.)");
- printf("\n");
- return(0);
- }
-
- if (PASS == 1) { /* only for FLT */
- flt_radix= f_radix;
- if (F) i_define(D_FLT_RADIX, "", "FLT", "_RADIX",
- (long) f_radix, 0L, (long) F_RADIX, "");
- } else if (f_radix != flt_radix) {
- printf("\n%s*** WARNING: %s %s (%d) %s%s\n",
- co, thing, "arithmetic has a different radix",
- f_radix, "from float", oc);
- bugs++;
- }
-
- /* Now the number of digits precision */
- f_mant_dig=0; b=1.0;
- do { f_mant_dig++; b=Mul(b, base); }
- while (Diff(Diff(Sum(b, ONE), b), ONE) == ZERO);
- f_dig=floor_log(10, (Long_double)(b/base)) + (base==10?1:0);
- Vprintf("%sSignificant base digits = %d %s %d %s%s\n",
- co, f_mant_dig, "(= at least", f_dig, "decimal digits)", oc);
- if (F) i_define(D_MANT_DIG, thing, Fname, "_MANT_DIG",
- (long) f_mant_dig, 0L, (long) F_MANT_DIG, "");
- if (F) i_define(D_DIG, thing, Fname, "_DIG",
- (long) f_dig, 0L, (long) F_DIG, "");
- digs= ceil_log(10, (Long_double)b); /* the number of digits to printf */
-
- /* Rounding *******************************************************/
- basem1=Diff(base, HALF);
- if (Diff(Sum(a, basem1), a) != ZERO) {
- if (f_radix == 2) basem1=0.375;
- else basem1=1.0;
- if (Diff(Sum(a, basem1), a) != ZERO) irnd=2; /* away from 0 */
- else irnd=1; /* to nearest */
- } else irnd=0; /* towards 0 */
-
- basem1=Diff(base, HALF);
-
- if (Diff(Diff(-a, basem1), -a) != ZERO) {
- if (f_radix == 2) basem1=0.375;
- else basem1=1.0;
- if (Diff(Diff(-a, basem1), -a) != ZERO) mrnd=2; /* away from 0*/
- else mrnd=1; /* to nearest */
- } else mrnd=0; /* towards 0 */
-
- f_rounds= -1; /* Unknown rounding */
- if (irnd==0 && mrnd==0) f_rounds=0; /* zero = chops */
- if (irnd==1 && mrnd==1) f_rounds=1; /* nearest */
- if (irnd==2 && mrnd==0) f_rounds=2; /* +inf */
- if (irnd==0 && mrnd==2) f_rounds=3; /* -inf */
-
- if (f_rounds != -1) {
- Vprintf("%sArithmetic rounds towards ", co);
- switch (f_rounds) {
- case 0: Vprintf("zero (i.e. it chops)"); break;
- case 1: Vprintf("nearest"); break;
- case 2: Vprintf("+infinity"); break;
- case 3: Vprintf("-infinity"); break;
- default: Vprintf("???"); break;
- }
- Vprintf("%s\n", oc);
- } else { /* Hmm, try to give some help here */
- Vprintf("%sArithmetic rounds oddly: %s\n", co, oc);
- Vprintf("%s Negative numbers %s%s\n",
- co, mrnd==0 ? "towards zero" :
- mrnd==1 ? "to nearest" :
- "away from zero",
- oc);
- Vprintf("%s Positive numbers %s%s\n",
- co, irnd==0 ? "towards zero" :
- irnd==1 ? "to nearest" :
- "away from zero",
- oc);
- }
- /* An extra goody */
- if (f_radix == 2 && f_rounds == 1) {
- if (Diff(Sum(a, ONE), a) != ZERO) {
- Vprintf("%s Tie breaking rounds up%s\n", co, oc);
- } else if (Diff(Sum(a, THREE), a) == FOUR) {
- Vprintf("%s Tie breaking rounds to even%s\n", co, oc);
- } else {
- Vprintf("%s Tie breaking rounds down%s\n", co, oc);
- }
- }
- if (PASS == 1) { /* only for FLT */
- flt_rounds= f_rounds;
- /* Prefer system float.h definition of F_ROUNDS,
- since it's more likely to be right than our "1". */
- if (F && (!SYS_FLOAT_H_WRAP || F_ROUNDS == UNDEFINED))
- i_define(D_FLT_ROUNDS, "", "FLT", "_ROUNDS",
- (long) f_rounds, 1L, (long) F_ROUNDS, "");
- } else if (f_rounds != flt_rounds) {
- printf("\n%s*** WARNING: %s %s (%d) %s%s\n",
- co, thing, "arithmetic rounds differently",
- f_rounds, "from float", oc);
- bugs++;
- }
-
- /* Various flavours of epsilon ************************************/
- negeps=f_mant_dig+f_mant_dig;
- basein=1.0/base;
- a=1.0;
- for(i=1; i<=negeps; i++) a*=basein;
-
- b=a;
- while (Diff(Diff(ONE, a), ONE) == ZERO) {
- a*=base;
- negeps--;
- }
- negeps= -negeps;
- Vprintf("%sSmallest x such that 1.0-base**x != 1.0 = %d%s\n",
- co, negeps, oc);
-
- etop = ONE;
- ebot = ZERO;
- eps = Sum(ebot, Div(Diff(etop, ebot), TWO));
- /* find the smallest epsneg (1-epsneg != 1) by binary search.
- ebot and etop are the current bounds */
- while (eps != ebot && eps != etop) {
- epsp1 = Diff(ONE, eps);
- if (epsp1 < ONE) etop = eps;
- else ebot = eps;
- eps = Sum(ebot, Div(Diff(etop, ebot), TWO));
- }
- eps= etop;
- /* Sanity check */
- if (Diff(ONE, etop) >= ONE || Diff(ONE, ebot) != ONE) {
- eek_a_bug("internal error calculating epsneg");
- }
- Vprintf("%sSmallest x such that 1.0-x != 1.0 = %s%s\n",
- co, f_rep(digs, (Long_double) eps), oc);
- if (V) F_check(digs, (Long_double) eps);
-
- epsneg=a;
- if ((f_radix!=2) && irnd) {
- /* a=(a*(1.0+a))/(1.0+1.0); => */
- a=Div(Mul(a, Sum(ONE, a)), Sum(ONE, ONE));
- /* if ((1.0-a)-1.0 != 0.0) epsneg=a; => */
- if (Diff(Diff(ONE, a), ONE) != ZERO) epsneg=a;
- }
- /* epsneg is used later */
- Unexpected(20);
-
- machep= -f_mant_dig-f_mant_dig;
- a=b;
- while (Diff(Sum(ONE, a), ONE) == ZERO) { a*=base; machep++; }
- Vprintf("%sSmallest x such that 1.0+base**x != 1.0 = %d%s\n",
- co, machep, oc);
-
- etop = ONE;
- ebot = ZERO;
- eps = Sum(ebot, Div(Diff(etop, ebot), TWO));
- /* find the smallest eps (1+eps != 1) by binary search.
- ebot and etop are the current bounds */
- while (eps != ebot && eps != etop) {
- epsp1 = Sum(ONE, eps);
- if (epsp1 > ONE) etop = eps;
- else ebot = eps;
- eps = Sum(ebot, Div(Diff(etop, ebot), TWO));
- }
- /* Sanity check */
- if (Sum(ONE, etop) <= ONE || Sum(ONE, ebot) != ONE) {
- eek_a_bug("internal error calculating eps");
- }
- f_epsilon=etop;
-
- Vprintf("%sSmallest x such that 1.0+x != 1.0 = %s%s\n",
- co, f_rep(digs, (Long_double) f_epsilon), oc);
-
- f_epsilon= Diff(Sum(ONE, f_epsilon), ONE); /* New C standard defn */
- Vprintf("%s(Above number + 1.0) - 1.0 = %s%s\n",
- co, f_rep(digs, (Long_double) (f_epsilon)), oc);
-
- /* Possible loss of precision warnings here from non-stdc compilers */
- if (F) f_define(D_EPSILON, thing,
- Fname, "_EPSILON", digs,
- (Long_double) f_epsilon,
- (Long_double) F_EPSILON, MARK);
- if (V || F) F_check(digs, (Long_double) f_epsilon);
- Unexpected(21);
- if (F) Validate(digs, (Long_double) f_epsilon, (Long_double) F_EPSILON,
- f_epsilon == Self(F_EPSILON));
- Unexpected(22);
-
- /* Extra chop info *************************************************/
- if (f_rounds == 0) {
- if (Diff(Mul(Sum(ONE,f_epsilon),ONE),ONE) != ZERO) {
- Vprintf("%sAlthough arithmetic chops, it uses guard digits%s\n", co, oc);
- }
- }
-
- /* Size of and minimum normalised exponent ************************/
- y=0; i=0; k=1; z=basein; z1=(1.0+f_epsilon)/base;
-
- /* Coarse search for the largest power of two */
- if (setjmp(lab)==0) { /* for underflow trap */ /* Yields i, k, y, y1 */
- do {
- y=z; y1=z1;
- z=Mul(y,y); z1=Mul(z1, y);
- a=Mul(z,ONE);
- z2=Div(z1,y);
- if (z2 != y1) break;
- if ((Sum(a,a) == ZERO) || (fabs(z) >= y)) break;
- i++;
- k+=k;
- } while(1);
- } else {
- Vprintf("%s%s underflow generates a trap%s\n", co, Thing, oc);
- }
- Unexpected(23);
-
- if (f_radix != 10) {
- iexp=i+1; /* for the sign */
- mx=k+k;
- } else {
- iexp=2;
- iz=f_radix;
- while (k >= iz) { iz*=f_radix; iexp++; }
- mx=iz+iz-1;
- }
-
- /* Fine tune starting with y and y1 */
- if (setjmp(lab)==0) { /* for underflow trap */ /* Yields k, f_min */
- do {
- f_min=y; z1=y1;
- y=Div(y,base); y1=Div(y1,base);
- a=Mul(y,ONE);
- z2=Mul(y1,base);
- if (z2 != z1) break;
- if ((Sum(a,a) == ZERO) || (fabs(y) >= f_min)) break;
- k++;
- } while (1);
- }
- Unexpected(24);
-
- f_min_exp=(-k)+1;
-
- if ((mx <= k+k-3) && (f_radix != 10)) { mx+=mx; iexp+=1; }
- Vprintf("%sNumber of bits used for exponent = %d%s\n", co, iexp, oc);
- Vprintf("%sMinimum normalised exponent = %d%s\n", co, f_min_exp-1, oc);
- if (F)
- i_define(D_MIN_EXP, thing, Fname, "_MIN_EXP",
- (long) f_min_exp, (long) maxint, (long) F_MIN_EXP, "");
-
- if (setjmp(lab)==0) {
- Vprintf("%sMinimum normalised positive number = %s%s\n",
- co, f_rep(digs, (Long_double) f_min), oc);
- } else {
- eek_a_bug("printf can't print the smallest normalised number");
- printf("\n");
- }
- Unexpected(25);
- /* Possible loss of precision warnings here from non-stdc compilers */
- if (setjmp(lab) == 0) {
- if (F) f_define(D_MIN, thing,
- Fname, "_MIN", digs,
- (Long_double) f_min,
- (Long_double) F_MIN, MARK);
- if (V || F) F_check(digs, (Long_double) f_min);
- } else {
- eek_a_bug("xxx_MIN caused a trap");
- printf("\n");
- }
-
- if (setjmp(lab) == 0) {
- if (F) Validate(digs, (Long_double) f_min, (Long_double) F_MIN,
- f_min == Self(F_MIN));
- } else {
- printf("%s*** Verify failed for above #define!\n %s %s\n\n",
- co, "Compiler has an unusable number for value", oc);
- bugs++;
- }
- Unexpected(26);
-
- a=1.0; f_min_10_exp=0;
- while (a > f_min*10.0) { a/=10.0; f_min_10_exp--; }
- if (F) i_define(D_MIN_10_EXP, thing, Fname, "_MIN_10_EXP",
- (long) f_min_10_exp, (long) maxint,
- (long) F_MIN_10_EXP, "");
-
- /* Minimum exponent ************************************************/
- if (setjmp(lab)==0) { /* for underflow trap */ /* Yields xminner */
- do {
- xminner=y;
- y=Div(y,base);
- a=Mul(y,ONE);
- if ((Sum(a,a) == ZERO) || (fabs(y) >= xminner)) break;
- } while (1);
- }
- Unexpected(27);
-
- if (xminner != 0.0 && xminner != f_min) {
- normal= 0;
- Vprintf("%sThe smallest numbers are not kept normalised%s\n",
- co, oc);
- if (setjmp(lab)==0) {
- Vprintf("%sSmallest unnormalised positive number = %s%s\n",
- co, f_rep(digs, (Long_double) xminner), oc);
- if (V) F_check(digs, (Long_double) xminner);
- } else {
- eek_a_bug("printf can't print the smallest unnormalised number.");
- printf("\n");
- }
- Unexpected(28);
- } else {
- normal= 1;
- Vprintf("%sThe smallest numbers are normalised%s\n", co, oc);
- }
-
- /* Maximum exponent ************************************************/
- f_max_exp=2; f_max=1.0; newxmax=base+1.0;
- inf=0; trap=0;
- while (f_max<newxmax) {
- f_max=newxmax;
- if (setjmp(lab) == 0) { /* Yields inf, f_max_exp */
- newxmax=Mul(newxmax, base);
- } else {
- trap=1;
- break;
- }
- if (Div(newxmax, base) != f_max) {
- inf=1; /* ieee infinity */
- break;
- }
- f_max_exp++;
- }
- Unexpected(29);
- if (trap) {
- Vprintf("%s%s overflow generates a trap%s\n", co, Thing, oc);
- }
-
- if (inf) Vprintf("%sThere is an 'infinite' value%s\n", co, oc);
- Vprintf("%sMaximum exponent = %d%s\n", co, f_max_exp, oc);
- if (F) i_define(D_MAX_EXP, thing, Fname, "_MAX_EXP",
- (long) f_max_exp, 0L, (long) F_MAX_EXP, "");
-
- /* Largest number ***************************************************/
- f_max=Diff(ONE, epsneg);
- if (Mul(f_max,ONE) != f_max) f_max=Diff(ONE, Mul(base,epsneg));
- for (i=1; i<=f_max_exp; i++) f_max=Mul(f_max, base);
-
- if (setjmp(lab)==0) {
- Vprintf("%sMaximum number = %s%s\n",
- co, f_rep(digs, (Long_double) f_max), oc);
- } else {
- eek_a_bug("printf can't print the largest double.");
- printf("\n");
- }
- if (setjmp(lab)==0) {
- /* Possible loss of precision warnings here from non-stdc compilers */
- if (F) f_define(D_MAX, thing,
- Fname, "_MAX", digs,
- (Long_double) f_max,
- (Long_double) F_MAX, MARK);
- if (V || F) F_check(digs, (Long_double) f_max);
- } else {
- eek_a_bug("xxx_MAX caused a trap");
- printf("\n");
- }
- if (setjmp(lab)==0) {
- if (F) Validate(digs, (Long_double) f_max, (Long_double) F_MAX,
- f_max == Self(F_MAX));
- } else {
- printf("%s*** Verify failed for above #define!\n %s %s\n\n",
- co, "Compiler has an unusable number for value", oc);
- bugs++;
- }
- Unexpected(30);
-
- a=1.0; f_max_10_exp=0;
- while (a < f_max/10.0) { a*=10.0; f_max_10_exp++; }
- if (F) i_define(D_MAX_10_EXP, thing, Fname, "_MAX_10_EXP",
- (long) f_max_10_exp, 0L, (long) F_MAX_10_EXP, "");
-
- /* Hidden bit + sanity check ****************************************/
- if (f_radix != 10) {
- hidden=0;
- mantbits=floor_log(2, (Long_double)f_radix)*f_mant_dig;
- if (mantbits == 64
- && iexp == 15
- && f_max_exp+f_min_exp > 0 /* ??? f_min_exp may be wrong. */
- && mantbits+iexp+17 == (int)sizeof(Number)*bits_per_byte) {
- Vprintf("%sArithmetic probably doesn't use a hidden bit%s\n", co, oc);
- Vprintf("%sIt's probably 80387 or 68881 extended real%s\n", co, oc);
- goto is_extended;
- }
- if (mantbits+iexp == (int)sizeof(Number)*bits_per_byte) {
- hidden=1;
- Vprintf("%sArithmetic uses a hidden bit%s\n", co, oc);
- } else if (mantbits+iexp+1 == (int)sizeof(Number)*bits_per_byte) {
- Vprintf("%sArithmetic doesn't use a hidden bit%s\n",
- co, oc);
- } else {
- printf("\n%s%s\n %s %s %s!%s\n\n",
- co,
- "*** Something fishy here!",
- "Exponent size + significand size doesn't match",
- "with the size of a", thing,
- oc);
- }
- if (hidden && f_radix == 2 && f_max_exp+f_min_exp==3) {
- Vprintf("%sIt looks like %s length IEEE format%s\n",
- co, f_mant_dig==24 ? "single" :
- f_mant_dig==53 ? "double" :
- f_mant_dig >53 ? "extended" :
- "some", oc);
-is_extended:
- if (f_rounds != 1 || normal) {
- Vprintf("%s though ", co);
- if (f_rounds != 1) {
- Vprintf("the rounding is unusual");
- if (normal) Vprintf(" and ");
- }
- if (normal) Vprintf("the normalisation is unusual");
- Vprintf("%s\n", oc);
- }
- } else {
- Vprintf("%sIt doesn't look like IEEE format%s\n",
- co, oc);
- }
- }
- printf("\n"); /* regardless of verbosity */
- return f_mant_dig;
-}
-
-Procedure EPROP(fprec, dprec, lprec) int fprec, dprec, lprec; {
- /* See if expressions are evaluated in extended precision.
- Some compilers optimise even if you don't want it,
- and then this function fails to produce the right result.
- We try to diagnose this if it happens.
- */
- Volatile int eprec;
- Volatile double a, b, base, old;
- Volatile Number d, oldd, dbase, one, zero;
- Volatile int bad=0;
-
- /* Size of significand **************************************/
- a=1.0;
- if (setjmp(lab) == 0) { /* Yields nothing */
- do { old=a; a=a+a; }
- while ((((a+1.0)-a)-1.0) == 0.0 && a>old);
- } else bad=1;
-
- /* Avoid the comparison if bad is set,
- to avoid trouble on the convex. */
- if (!bad && (a <= old)) bad=1;
-
- if (!bad) {
- b=1.0;
- if (setjmp(lab) == 0) { /* Yields nothing */
- do { old=b; b=b+b; }
- while ((base=((a+b)-a)) == 0.0 && b>old);
- if (b <= old) bad=1;
- } else bad=1;
- }
-
- if (!bad) {
- eprec=0; d=1.0; dbase=base; one=1.0; zero=0.0;
- if (setjmp(lab) == 0) { /* Yields nothing */
- do { eprec++; oldd=d; d=d*dbase; }
- while ((((d+one)-d)-one) == zero && d>oldd);
- if (d <= oldd) bad=1;
- } else bad=1;
- }
-
- Unexpected(31);
-
- if (bad) {
- Vprintf("%sCan't determine precision for %s expressions:\n%s%s\n",
- co, thing, " check that you compiled without optimisation!",
- oc);
- } else if (eprec==dprec) {
- Vprintf("%s%s expressions are evaluated in double precision%s\n",
- co, Thing, oc);
- } else if (eprec==fprec) {
- Vprintf("%s%s expressions are evaluated in float precision%s\n",
- co, Thing, oc);
- } else if (eprec==lprec) {
- Vprintf("%s%s expressions are evaluated in long double precision%s\n",
- co, Thing, oc);
- } else {
- Vprintf("%s%s expressions are evaluated in a %s %s %d %s%s\n",
- co, Thing, eprec>dprec ? "higher" : "lower",
- "precision than double,\n using",
- eprec, "base digits",
- oc);
- }
-}
-
-#else /* not Number */
-
-#ifdef FPROP /* Then create dummy routines for long double */
-/* ARGSUSED */
-int FPROP(bits_per_byte) int bits_per_byte; { return 0; }
-#endif
-#ifdef EPROP
-/* ARGSUSED */
-Procedure EPROP(fprec, dprec, lprec) int fprec, dprec, lprec; {}
-#endif
-
-#endif /* ifdef Number */
-
-/* Increment the pass number */
-#undef PASS
-
-#ifdef PASS2
-#undef PASS2
-#define PASS 3
-#define PASS3 1
-#endif
-
-#ifdef PASS1
-#undef PASS1
-#define PASS 2
-#define PASS2 1
-#endif
-
-#ifdef PASS0
-#undef PASS0
-#endif
-
-#ifdef PASS /* then rescan this file */
-#ifdef NO_FILE
-#include "enquire.c"
-#else
-#include FILENAME /* if this line fails to compile, define NO_FILE */
-#endif
-#endif /* PASS */
-
projects / msp430-gcc.git / blobdiff