]> oss.titaniummirror.com Git - msp430-gcc.git/blobdiff - gcc/f/g77.info-12
Imported gcc-4.4.3
[msp430-gcc.git] / gcc / f / g77.info-12
diff --git a/gcc/f/g77.info-12 b/gcc/f/g77.info-12
deleted file mode 100644 (file)
index 10dc967..0000000
+++ /dev/null
@@ -1,1687 +0,0 @@
-This is g77.info, produced by makeinfo version 4.5 from g77.texi.
-
-INFO-DIR-SECTION Programming
-START-INFO-DIR-ENTRY
-* g77: (g77).                  The GNU Fortran compiler.
-END-INFO-DIR-ENTRY
-   This file documents the use and the internals of the GNU Fortran
-(`g77') compiler.  It corresponds to the GCC-3.2.3 version of `g77'.
-
-   Published by the Free Software Foundation 59 Temple Place - Suite 330
-Boston, MA 02111-1307 USA
-
-   Copyright (C) 1995,1996,1997,1998,1999,2000,2001,2002 Free Software
-Foundation, Inc.
-
-   Permission is granted to copy, distribute and/or modify this document
-under the terms of the GNU Free Documentation License, Version 1.1 or
-any later version published by the Free Software Foundation; with the
-Invariant Sections being "GNU General Public License" and "Funding Free
-Software", the Front-Cover texts being (a) (see below), and with the
-Back-Cover Texts being (b) (see below).  A copy of the license is
-included in the section entitled "GNU Free Documentation License".
-
-   (a) The FSF's Front-Cover Text is:
-
-   A GNU Manual
-
-   (b) The FSF's Back-Cover Text is:
-
-   You have freedom to copy and modify this GNU Manual, like GNU
-software.  Copies published by the Free Software Foundation raise
-funds for GNU development.
-
-   Contributed by James Craig Burley (<craig@jcb-sc.com>).  Inspired by
-a first pass at translating `g77-0.5.16/f/DOC' that was contributed to
-Craig by David Ronis (<ronis@onsager.chem.mcgill.ca>).
-
-\1f
-File: g77.info,  Node: Other Intrinsics,  Prev: Intrinsic Groups,  Up: Compiler Intrinsics
-
-Other Intrinsics
-----------------
-
-   `g77' supports intrinsics other than those in the GNU Fortran
-language proper.  This set of intrinsics is described below.
-
-   (Note that the empty lines appearing in the menu below are not
-intentional--they result from a bug in the `makeinfo' program.)
-
-* Menu:
-
-
-* ACosD Intrinsic::     (Reserved for future use.)
-
-* AIMax0 Intrinsic::    (Reserved for future use.)
-* AIMin0 Intrinsic::    (Reserved for future use.)
-
-* AJMax0 Intrinsic::    (Reserved for future use.)
-* AJMin0 Intrinsic::    (Reserved for future use.)
-
-* ASinD Intrinsic::     (Reserved for future use.)
-
-* ATan2D Intrinsic::    (Reserved for future use.)
-* ATanD Intrinsic::     (Reserved for future use.)
-
-* BITest Intrinsic::    (Reserved for future use.)
-
-* BJTest Intrinsic::    (Reserved for future use.)
-
-* CDAbs Intrinsic::     Absolute value (archaic).
-* CDCos Intrinsic::     Cosine (archaic).
-* CDExp Intrinsic::     Exponential (archaic).
-* CDLog Intrinsic::     Natural logarithm (archaic).
-* CDSin Intrinsic::     Sine (archaic).
-* CDSqRt Intrinsic::    Square root (archaic).
-
-* ChDir Intrinsic (function):: Change directory.
-
-* ChMod Intrinsic (function):: Change file modes.
-
-* CosD Intrinsic::      (Reserved for future use.)
-
-* DACosD Intrinsic::    (Reserved for future use.)
-
-* DASinD Intrinsic::    (Reserved for future use.)
-
-* DATan2D Intrinsic::   (Reserved for future use.)
-* DATanD Intrinsic::    (Reserved for future use.)
-* Date Intrinsic::      Get current date as dd-Mon-yy.
-
-* DbleQ Intrinsic::     (Reserved for future use.)
-
-* DCmplx Intrinsic::    Construct `COMPLEX(KIND=2)' value.
-* DConjg Intrinsic::    Complex conjugate (archaic).
-
-* DCosD Intrinsic::     (Reserved for future use.)
-
-* DFloat Intrinsic::    Conversion (archaic).
-
-* DFlotI Intrinsic::    (Reserved for future use.)
-* DFlotJ Intrinsic::    (Reserved for future use.)
-
-* DImag Intrinsic::     Convert/extract imaginary part of complex (archaic).
-
-* DReal Intrinsic::     Convert value to type `REAL(KIND=2)'.
-
-* DSinD Intrinsic::     (Reserved for future use.)
-
-* DTanD Intrinsic::     (Reserved for future use.)
-
-* DTime Intrinsic (function):: Get elapsed time since last time.
-
-* FGet Intrinsic (function):: Read a character from unit 5 stream-wise.
-
-* FGetC Intrinsic (function):: Read a character stream-wise.
-
-* FloatI Intrinsic::    (Reserved for future use.)
-* FloatJ Intrinsic::    (Reserved for future use.)
-
-* FPut Intrinsic (function):: Write a character to unit 6 stream-wise.
-
-* FPutC Intrinsic (function):: Write a character stream-wise.
-
-* IDate Intrinsic (VXT):: Get local time info (VAX/VMS).
-
-* IIAbs Intrinsic::     (Reserved for future use.)
-* IIAnd Intrinsic::     (Reserved for future use.)
-* IIBClr Intrinsic::    (Reserved for future use.)
-* IIBits Intrinsic::    (Reserved for future use.)
-* IIBSet Intrinsic::    (Reserved for future use.)
-* IIDiM Intrinsic::     (Reserved for future use.)
-* IIDInt Intrinsic::    (Reserved for future use.)
-* IIDNnt Intrinsic::    (Reserved for future use.)
-* IIEOr Intrinsic::     (Reserved for future use.)
-* IIFix Intrinsic::     (Reserved for future use.)
-* IInt Intrinsic::      (Reserved for future use.)
-* IIOr Intrinsic::      (Reserved for future use.)
-* IIQint Intrinsic::    (Reserved for future use.)
-* IIQNnt Intrinsic::    (Reserved for future use.)
-* IIShftC Intrinsic::   (Reserved for future use.)
-* IISign Intrinsic::    (Reserved for future use.)
-
-* IMax0 Intrinsic::     (Reserved for future use.)
-* IMax1 Intrinsic::     (Reserved for future use.)
-* IMin0 Intrinsic::     (Reserved for future use.)
-* IMin1 Intrinsic::     (Reserved for future use.)
-* IMod Intrinsic::      (Reserved for future use.)
-
-* INInt Intrinsic::     (Reserved for future use.)
-* INot Intrinsic::      (Reserved for future use.)
-
-* IZExt Intrinsic::     (Reserved for future use.)
-* JIAbs Intrinsic::     (Reserved for future use.)
-* JIAnd Intrinsic::     (Reserved for future use.)
-* JIBClr Intrinsic::    (Reserved for future use.)
-* JIBits Intrinsic::    (Reserved for future use.)
-* JIBSet Intrinsic::    (Reserved for future use.)
-* JIDiM Intrinsic::     (Reserved for future use.)
-* JIDInt Intrinsic::    (Reserved for future use.)
-* JIDNnt Intrinsic::    (Reserved for future use.)
-* JIEOr Intrinsic::     (Reserved for future use.)
-* JIFix Intrinsic::     (Reserved for future use.)
-* JInt Intrinsic::      (Reserved for future use.)
-* JIOr Intrinsic::      (Reserved for future use.)
-* JIQint Intrinsic::    (Reserved for future use.)
-* JIQNnt Intrinsic::    (Reserved for future use.)
-* JIShft Intrinsic::    (Reserved for future use.)
-* JIShftC Intrinsic::   (Reserved for future use.)
-* JISign Intrinsic::    (Reserved for future use.)
-* JMax0 Intrinsic::     (Reserved for future use.)
-* JMax1 Intrinsic::     (Reserved for future use.)
-* JMin0 Intrinsic::     (Reserved for future use.)
-* JMin1 Intrinsic::     (Reserved for future use.)
-* JMod Intrinsic::      (Reserved for future use.)
-* JNInt Intrinsic::     (Reserved for future use.)
-* JNot Intrinsic::      (Reserved for future use.)
-* JZExt Intrinsic::     (Reserved for future use.)
-
-* Kill Intrinsic (function):: Signal a process.
-
-* Link Intrinsic (function):: Make hard link in file system.
-
-* QAbs Intrinsic::      (Reserved for future use.)
-* QACos Intrinsic::     (Reserved for future use.)
-* QACosD Intrinsic::    (Reserved for future use.)
-* QASin Intrinsic::     (Reserved for future use.)
-* QASinD Intrinsic::    (Reserved for future use.)
-* QATan Intrinsic::     (Reserved for future use.)
-* QATan2 Intrinsic::    (Reserved for future use.)
-* QATan2D Intrinsic::   (Reserved for future use.)
-* QATanD Intrinsic::    (Reserved for future use.)
-* QCos Intrinsic::      (Reserved for future use.)
-* QCosD Intrinsic::     (Reserved for future use.)
-* QCosH Intrinsic::     (Reserved for future use.)
-* QDiM Intrinsic::      (Reserved for future use.)
-* QExp Intrinsic::      (Reserved for future use.)
-* QExt Intrinsic::      (Reserved for future use.)
-* QExtD Intrinsic::     (Reserved for future use.)
-* QFloat Intrinsic::    (Reserved for future use.)
-* QInt Intrinsic::      (Reserved for future use.)
-* QLog Intrinsic::      (Reserved for future use.)
-* QLog10 Intrinsic::    (Reserved for future use.)
-* QMax1 Intrinsic::     (Reserved for future use.)
-* QMin1 Intrinsic::     (Reserved for future use.)
-* QMod Intrinsic::      (Reserved for future use.)
-* QNInt Intrinsic::     (Reserved for future use.)
-* QSin Intrinsic::      (Reserved for future use.)
-* QSinD Intrinsic::     (Reserved for future use.)
-* QSinH Intrinsic::     (Reserved for future use.)
-* QSqRt Intrinsic::     (Reserved for future use.)
-* QTan Intrinsic::      (Reserved for future use.)
-* QTanD Intrinsic::     (Reserved for future use.)
-* QTanH Intrinsic::     (Reserved for future use.)
-
-* Rename Intrinsic (function):: Rename file.
-
-* Secnds Intrinsic::    Get local time offset since midnight.
-
-* Signal Intrinsic (function):: Muck with signal handling.
-
-* SinD Intrinsic::      (Reserved for future use.)
-
-* SnglQ Intrinsic::     (Reserved for future use.)
-
-* SymLnk Intrinsic (function):: Make symbolic link in file system.
-
-* System Intrinsic (function):: Invoke shell (system) command.
-
-* TanD Intrinsic::      (Reserved for future use.)
-
-* Time Intrinsic (VXT):: Get the time as a character value.
-
-* UMask Intrinsic (function):: Set file creation permissions mask.
-
-* Unlink Intrinsic (function):: Unlink file.
-
-* ZExt Intrinsic::      (Reserved for future use.)
-
-\1f
-File: g77.info,  Node: ACosD Intrinsic,  Next: AIMax0 Intrinsic,  Up: Other Intrinsics
-
-ACosD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL ACosD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: AIMax0 Intrinsic,  Next: AIMin0 Intrinsic,  Prev: ACosD Intrinsic,  Up: Other Intrinsics
-
-AIMax0 Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL AIMax0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: AIMin0 Intrinsic,  Next: AJMax0 Intrinsic,  Prev: AIMax0 Intrinsic,  Up: Other Intrinsics
-
-AIMin0 Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL AIMin0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: AJMax0 Intrinsic,  Next: AJMin0 Intrinsic,  Prev: AIMin0 Intrinsic,  Up: Other Intrinsics
-
-AJMax0 Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL AJMax0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: AJMin0 Intrinsic,  Next: ASinD Intrinsic,  Prev: AJMax0 Intrinsic,  Up: Other Intrinsics
-
-AJMin0 Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL AJMin0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: ASinD Intrinsic,  Next: ATan2D Intrinsic,  Prev: AJMin0 Intrinsic,  Up: Other Intrinsics
-
-ASinD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL ASinD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: ATan2D Intrinsic,  Next: ATanD Intrinsic,  Prev: ASinD Intrinsic,  Up: Other Intrinsics
-
-ATan2D Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL ATan2D' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: ATanD Intrinsic,  Next: BITest Intrinsic,  Prev: ATan2D Intrinsic,  Up: Other Intrinsics
-
-ATanD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL ATanD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: BITest Intrinsic,  Next: BJTest Intrinsic,  Prev: ATanD Intrinsic,  Up: Other Intrinsics
-
-BITest Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL BITest' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: BJTest Intrinsic,  Next: CDAbs Intrinsic,  Prev: BITest Intrinsic,  Up: Other Intrinsics
-
-BJTest Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL BJTest' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: CDAbs Intrinsic,  Next: CDCos Intrinsic,  Prev: BJTest Intrinsic,  Up: Other Intrinsics
-
-CDAbs Intrinsic
-...............
-
-     CDAbs(A)
-
-CDAbs: `REAL(KIND=2)' function.
-
-A: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `ABS()' that is specific to one type for A.  *Note
-Abs Intrinsic::.
-
-\1f
-File: g77.info,  Node: CDCos Intrinsic,  Next: CDExp Intrinsic,  Prev: CDAbs Intrinsic,  Up: Other Intrinsics
-
-CDCos Intrinsic
-...............
-
-     CDCos(X)
-
-CDCos: `COMPLEX(KIND=2)' function.
-
-X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `COS()' that is specific to one type for X.  *Note
-Cos Intrinsic::.
-
-\1f
-File: g77.info,  Node: CDExp Intrinsic,  Next: CDLog Intrinsic,  Prev: CDCos Intrinsic,  Up: Other Intrinsics
-
-CDExp Intrinsic
-...............
-
-     CDExp(X)
-
-CDExp: `COMPLEX(KIND=2)' function.
-
-X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `EXP()' that is specific to one type for X.  *Note
-Exp Intrinsic::.
-
-\1f
-File: g77.info,  Node: CDLog Intrinsic,  Next: CDSin Intrinsic,  Prev: CDExp Intrinsic,  Up: Other Intrinsics
-
-CDLog Intrinsic
-...............
-
-     CDLog(X)
-
-CDLog: `COMPLEX(KIND=2)' function.
-
-X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `LOG()' that is specific to one type for X.  *Note
-Log Intrinsic::.
-
-\1f
-File: g77.info,  Node: CDSin Intrinsic,  Next: CDSqRt Intrinsic,  Prev: CDLog Intrinsic,  Up: Other Intrinsics
-
-CDSin Intrinsic
-...............
-
-     CDSin(X)
-
-CDSin: `COMPLEX(KIND=2)' function.
-
-X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `SIN()' that is specific to one type for X.  *Note
-Sin Intrinsic::.
-
-\1f
-File: g77.info,  Node: CDSqRt Intrinsic,  Next: ChDir Intrinsic (function),  Prev: CDSin Intrinsic,  Up: Other Intrinsics
-
-CDSqRt Intrinsic
-................
-
-     CDSqRt(X)
-
-CDSqRt: `COMPLEX(KIND=2)' function.
-
-X: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `SQRT()' that is specific to one type for X.  *Note
-SqRt Intrinsic::.
-
-\1f
-File: g77.info,  Node: ChDir Intrinsic (function),  Next: ChMod Intrinsic (function),  Prev: CDSqRt Intrinsic,  Up: Other Intrinsics
-
-ChDir Intrinsic (function)
-..........................
-
-     ChDir(DIR)
-
-ChDir: `INTEGER(KIND=1)' function.
-
-DIR: `CHARACTER'; scalar; INTENT(IN).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Sets the current working directory to be DIR.  Returns 0 on success
-or a non-zero error code.  See `chdir(3)'.
-
-   _Caution:_ Using this routine during I/O to a unit connected with a
-non-absolute file name can cause subsequent I/O on such a unit to fail
-because the I/O library might reopen files by name.
-
-   Due to the side effects performed by this intrinsic, the function
-form is not recommended.
-
-   For information on other intrinsics with the same name: *Note ChDir
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: ChMod Intrinsic (function),  Next: CosD Intrinsic,  Prev: ChDir Intrinsic (function),  Up: Other Intrinsics
-
-ChMod Intrinsic (function)
-..........................
-
-     ChMod(NAME, MODE)
-
-ChMod: `INTEGER(KIND=1)' function.
-
-NAME: `CHARACTER'; scalar; INTENT(IN).
-
-MODE: `CHARACTER'; scalar; INTENT(IN).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Changes the access mode of file NAME according to the specification
-MODE, which is given in the format of `chmod(1)'.  A null character
-(`CHAR(0)') marks the end of the name in NAME--otherwise, trailing
-blanks in NAME are ignored.  Currently, NAME must not contain the
-single quote character.
-
-   Returns 0 on success or a non-zero error code otherwise.
-
-   Note that this currently works by actually invoking `/bin/chmod' (or
-the `chmod' found when the library was configured) and so might fail in
-some circumstances and will, anyway, be slow.
-
-   Due to the side effects performed by this intrinsic, the function
-form is not recommended.
-
-   For information on other intrinsics with the same name: *Note ChMod
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: CosD Intrinsic,  Next: DACosD Intrinsic,  Prev: ChMod Intrinsic (function),  Up: Other Intrinsics
-
-CosD Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL CosD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DACosD Intrinsic,  Next: DASinD Intrinsic,  Prev: CosD Intrinsic,  Up: Other Intrinsics
-
-DACosD Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DACosD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DASinD Intrinsic,  Next: DATan2D Intrinsic,  Prev: DACosD Intrinsic,  Up: Other Intrinsics
-
-DASinD Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DASinD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DATan2D Intrinsic,  Next: DATanD Intrinsic,  Prev: DASinD Intrinsic,  Up: Other Intrinsics
-
-DATan2D Intrinsic
-.................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DATan2D' to use this name for
-an external procedure.
-
-\1f
-File: g77.info,  Node: DATanD Intrinsic,  Next: Date Intrinsic,  Prev: DATan2D Intrinsic,  Up: Other Intrinsics
-
-DATanD Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DATanD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: Date Intrinsic,  Next: DbleQ Intrinsic,  Prev: DATanD Intrinsic,  Up: Other Intrinsics
-
-Date Intrinsic
-..............
-
-     CALL Date(DATE)
-
-DATE: `CHARACTER'; scalar; INTENT(OUT).
-
-Intrinsic groups: `vxt'.
-
-Description:
-
-   Returns DATE in the form `DD-MMM-YY', representing the numeric day
-of the month DD, a three-character abbreviation of the month name MMM
-and the last two digits of the year YY, e.g. `25-Nov-96'.
-
-   This intrinsic is not recommended, due to the year 2000 approaching.
-Therefore, programs making use of this intrinsic might not be Year 2000
-(Y2K) compliant.  *Note CTime Intrinsic (subroutine)::, for information
-on obtaining more digits for the current (or any) date.
-
-\1f
-File: g77.info,  Node: DbleQ Intrinsic,  Next: DCmplx Intrinsic,  Prev: Date Intrinsic,  Up: Other Intrinsics
-
-DbleQ Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DbleQ' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DCmplx Intrinsic,  Next: DConjg Intrinsic,  Prev: DbleQ Intrinsic,  Up: Other Intrinsics
-
-DCmplx Intrinsic
-................
-
-     DCmplx(X, Y)
-
-DCmplx: `COMPLEX(KIND=2)' function.
-
-X: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).
-
-Y: `INTEGER' or `REAL'; OPTIONAL (must be omitted if X is `COMPLEX');
-scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   If X is not type `COMPLEX', constructs a value of type
-`COMPLEX(KIND=2)' from the real and imaginary values specified by X and
-Y, respectively.  If Y is omitted, `0D0' is assumed.
-
-   If X is type `COMPLEX', converts it to type `COMPLEX(KIND=2)'.
-
-   Although this intrinsic is not standard Fortran, it is a popular
-extension offered by many compilers that support `DOUBLE COMPLEX',
-since it offers the easiest way to convert to `DOUBLE COMPLEX' without
-using Fortran 90 features (such as the `KIND=' argument to the
-`CMPLX()' intrinsic).
-
-   (`CMPLX(0D0, 0D0)' returns a single-precision `COMPLEX' result, as
-required by standard FORTRAN 77.  That's why so many compilers provide
-`DCMPLX()', since `DCMPLX(0D0, 0D0)' returns a `DOUBLE COMPLEX' result.
-Still, `DCMPLX()' converts even `REAL*16' arguments to their `REAL*8'
-equivalents in most dialects of Fortran, so neither it nor `CMPLX()'
-allow easy construction of arbitrary-precision values without
-potentially forcing a conversion involving extending or reducing
-precision.  GNU Fortran provides such an intrinsic, called `COMPLEX()'.)
-
-   *Note Complex Intrinsic::, for information on easily constructing a
-`COMPLEX' value of arbitrary precision from `REAL' arguments.
-
-\1f
-File: g77.info,  Node: DConjg Intrinsic,  Next: DCosD Intrinsic,  Prev: DCmplx Intrinsic,  Up: Other Intrinsics
-
-DConjg Intrinsic
-................
-
-     DConjg(Z)
-
-DConjg: `COMPLEX(KIND=2)' function.
-
-Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `CONJG()' that is specific to one type for Z.  *Note
-Conjg Intrinsic::.
-
-\1f
-File: g77.info,  Node: DCosD Intrinsic,  Next: DFloat Intrinsic,  Prev: DConjg Intrinsic,  Up: Other Intrinsics
-
-DCosD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DCosD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DFloat Intrinsic,  Next: DFlotI Intrinsic,  Prev: DCosD Intrinsic,  Up: Other Intrinsics
-
-DFloat Intrinsic
-................
-
-     DFloat(A)
-
-DFloat: `REAL(KIND=2)' function.
-
-A: `INTEGER'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `REAL()' that is specific to one type for A.  *Note
-Real Intrinsic::.
-
-\1f
-File: g77.info,  Node: DFlotI Intrinsic,  Next: DFlotJ Intrinsic,  Prev: DFloat Intrinsic,  Up: Other Intrinsics
-
-DFlotI Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DFlotI' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DFlotJ Intrinsic,  Next: DImag Intrinsic,  Prev: DFlotI Intrinsic,  Up: Other Intrinsics
-
-DFlotJ Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DFlotJ' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DImag Intrinsic,  Next: DReal Intrinsic,  Prev: DFlotJ Intrinsic,  Up: Other Intrinsics
-
-DImag Intrinsic
-...............
-
-     DImag(Z)
-
-DImag: `REAL(KIND=2)' function.
-
-Z: `COMPLEX(KIND=2)'; scalar; INTENT(IN).
-
-Intrinsic groups: `f2c', `vxt'.
-
-Description:
-
-   Archaic form of `AIMAG()' that is specific to one type for Z.  *Note
-AImag Intrinsic::.
-
-\1f
-File: g77.info,  Node: DReal Intrinsic,  Next: DSinD Intrinsic,  Prev: DImag Intrinsic,  Up: Other Intrinsics
-
-DReal Intrinsic
-...............
-
-     DReal(A)
-
-DReal: `REAL(KIND=2)' function.
-
-A: `INTEGER', `REAL', or `COMPLEX'; scalar; INTENT(IN).
-
-Intrinsic groups: `vxt'.
-
-Description:
-
-   Converts A to `REAL(KIND=2)'.
-
-   If A is type `COMPLEX', its real part is converted (if necessary) to
-`REAL(KIND=2)', and its imaginary part is disregarded.
-
-   Although this intrinsic is not standard Fortran, it is a popular
-extension offered by many compilers that support `DOUBLE COMPLEX',
-since it offers the easiest way to extract the real part of a `DOUBLE
-COMPLEX' value without using the Fortran 90 `REAL()' intrinsic in a way
-that produces a return value inconsistent with the way many FORTRAN 77
-compilers handle `REAL()' of a `DOUBLE COMPLEX' value.
-
-   *Note RealPart Intrinsic::, for information on a GNU Fortran
-intrinsic that avoids these areas of confusion.
-
-   *Note Dble Intrinsic::, for information on the standard FORTRAN 77
-replacement for `DREAL()'.
-
-   *Note REAL() and AIMAG() of Complex::, for more information on this
-issue.
-
-\1f
-File: g77.info,  Node: DSinD Intrinsic,  Next: DTanD Intrinsic,  Prev: DReal Intrinsic,  Up: Other Intrinsics
-
-DSinD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DSinD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DTanD Intrinsic,  Next: DTime Intrinsic (function),  Prev: DSinD Intrinsic,  Up: Other Intrinsics
-
-DTanD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL DTanD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: DTime Intrinsic (function),  Next: FGet Intrinsic (function),  Prev: DTanD Intrinsic,  Up: Other Intrinsics
-
-DTime Intrinsic (function)
-..........................
-
-     DTime(TARRAY)
-
-DTime: `REAL(KIND=1)' function.
-
-TARRAY: `REAL(KIND=1)'; DIMENSION(2); INTENT(OUT).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Initially, return the number of seconds of runtime since the start
-of the process's execution as the function value, and the user and
-system components of this in `TARRAY(1)' and `TARRAY(2)' respectively.
-The functions' value is equal to `TARRAY(1) + TARRAY(2)'.
-
-   Subsequent invocations of `DTIME()' return values accumulated since
-the previous invocation.
-
-   On some systems, the underlying timings are represented using types
-with sufficiently small limits that overflows (wraparounds) are
-possible, such as 32-bit types.  Therefore, the values returned by this
-intrinsic might be, or become, negative, or numerically less than
-previous values, during a single run of the compiled program.
-
-   Due to the side effects performed by this intrinsic, the function
-form is not recommended.
-
-   For information on other intrinsics with the same name: *Note DTime
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: FGet Intrinsic (function),  Next: FGetC Intrinsic (function),  Prev: DTime Intrinsic (function),  Up: Other Intrinsics
-
-FGet Intrinsic (function)
-.........................
-
-     FGet(C)
-
-FGet: `INTEGER(KIND=1)' function.
-
-C: `CHARACTER'; scalar; INTENT(OUT).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Reads a single character into C in stream mode from unit 5
-(by-passing normal formatted input) using `getc(3)'.  Returns 0 on
-success, -1 on end-of-file, and the error code from `ferror(3)'
-otherwise.
-
-   Stream I/O should not be mixed with normal record-oriented
-(formatted or unformatted) I/O on the same unit; the results are
-unpredictable.
-
-   For information on other intrinsics with the same name: *Note FGet
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: FGetC Intrinsic (function),  Next: FloatI Intrinsic,  Prev: FGet Intrinsic (function),  Up: Other Intrinsics
-
-FGetC Intrinsic (function)
-..........................
-
-     FGetC(UNIT, C)
-
-FGetC: `INTEGER(KIND=1)' function.
-
-UNIT: `INTEGER'; scalar; INTENT(IN).
-
-C: `CHARACTER'; scalar; INTENT(OUT).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Reads a single character into C in stream mode from unit UNIT
-(by-passing normal formatted output) using `getc(3)'.  Returns 0 on
-success, -1 on end-of-file, and the error code from `ferror(3)'
-otherwise.
-
-   Stream I/O should not be mixed with normal record-oriented
-(formatted or unformatted) I/O on the same unit; the results are
-unpredictable.
-
-   For information on other intrinsics with the same name: *Note FGetC
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: FloatI Intrinsic,  Next: FloatJ Intrinsic,  Prev: FGetC Intrinsic (function),  Up: Other Intrinsics
-
-FloatI Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL FloatI' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: FloatJ Intrinsic,  Next: FPut Intrinsic (function),  Prev: FloatI Intrinsic,  Up: Other Intrinsics
-
-FloatJ Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL FloatJ' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: FPut Intrinsic (function),  Next: FPutC Intrinsic (function),  Prev: FloatJ Intrinsic,  Up: Other Intrinsics
-
-FPut Intrinsic (function)
-.........................
-
-     FPut(C)
-
-FPut: `INTEGER(KIND=1)' function.
-
-C: `CHARACTER'; scalar; INTENT(IN).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Writes the single character C in stream mode to unit 6 (by-passing
-normal formatted output) using `getc(3)'.  Returns 0 on success, the
-error code from `ferror(3)' otherwise.
-
-   Stream I/O should not be mixed with normal record-oriented
-(formatted or unformatted) I/O on the same unit; the results are
-unpredictable.
-
-   For information on other intrinsics with the same name: *Note FPut
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: FPutC Intrinsic (function),  Next: IDate Intrinsic (VXT),  Prev: FPut Intrinsic (function),  Up: Other Intrinsics
-
-FPutC Intrinsic (function)
-..........................
-
-     FPutC(UNIT, C)
-
-FPutC: `INTEGER(KIND=1)' function.
-
-UNIT: `INTEGER'; scalar; INTENT(IN).
-
-C: `CHARACTER'; scalar; INTENT(IN).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Writes the single character C in stream mode to unit UNIT
-(by-passing normal formatted output) using `putc(3)'.  Returns 0 on
-success, the error code from `ferror(3)' otherwise.
-
-   Stream I/O should not be mixed with normal record-oriented
-(formatted or unformatted) I/O on the same unit; the results are
-unpredictable.
-
-   For information on other intrinsics with the same name: *Note FPutC
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: IDate Intrinsic (VXT),  Next: IIAbs Intrinsic,  Prev: FPutC Intrinsic (function),  Up: Other Intrinsics
-
-IDate Intrinsic (VXT)
-.....................
-
-     CALL IDate(M, D, Y)
-
-M: `INTEGER(KIND=1)'; scalar; INTENT(OUT).
-
-D: `INTEGER(KIND=1)'; scalar; INTENT(OUT).
-
-Y: `INTEGER(KIND=1)'; scalar; INTENT(OUT).
-
-Intrinsic groups: `vxt'.
-
-Description:
-
-   Returns the numerical values of the current local time.  The month
-(in the range 1-12) is returned in M, the day (in the range 1-7) in D,
-and the year in Y (in the range 0-99).
-
-   This intrinsic is not recommended, due to the year 2000 approaching.
-Therefore, programs making use of this intrinsic might not be Year 2000
-(Y2K) compliant.  For example, the date might appear, to such programs,
-to wrap around (change from a larger value to a smaller one) as of the
-Year 2000.
-
-   *Note IDate Intrinsic (UNIX)::, for information on obtaining more
-digits for the current date.
-
-   For information on other intrinsics with the same name: *Note IDate
-Intrinsic (UNIX)::.
-
-\1f
-File: g77.info,  Node: IIAbs Intrinsic,  Next: IIAnd Intrinsic,  Prev: IDate Intrinsic (VXT),  Up: Other Intrinsics
-
-IIAbs Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIAbs' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIAnd Intrinsic,  Next: IIBClr Intrinsic,  Prev: IIAbs Intrinsic,  Up: Other Intrinsics
-
-IIAnd Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIAnd' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIBClr Intrinsic,  Next: IIBits Intrinsic,  Prev: IIAnd Intrinsic,  Up: Other Intrinsics
-
-IIBClr Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIBClr' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIBits Intrinsic,  Next: IIBSet Intrinsic,  Prev: IIBClr Intrinsic,  Up: Other Intrinsics
-
-IIBits Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIBits' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIBSet Intrinsic,  Next: IIDiM Intrinsic,  Prev: IIBits Intrinsic,  Up: Other Intrinsics
-
-IIBSet Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIBSet' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIDiM Intrinsic,  Next: IIDInt Intrinsic,  Prev: IIBSet Intrinsic,  Up: Other Intrinsics
-
-IIDiM Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIDiM' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIDInt Intrinsic,  Next: IIDNnt Intrinsic,  Prev: IIDiM Intrinsic,  Up: Other Intrinsics
-
-IIDInt Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIDInt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIDNnt Intrinsic,  Next: IIEOr Intrinsic,  Prev: IIDInt Intrinsic,  Up: Other Intrinsics
-
-IIDNnt Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIDNnt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIEOr Intrinsic,  Next: IIFix Intrinsic,  Prev: IIDNnt Intrinsic,  Up: Other Intrinsics
-
-IIEOr Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIEOr' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIFix Intrinsic,  Next: IInt Intrinsic,  Prev: IIEOr Intrinsic,  Up: Other Intrinsics
-
-IIFix Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIFix' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IInt Intrinsic,  Next: IIOr Intrinsic,  Prev: IIFix Intrinsic,  Up: Other Intrinsics
-
-IInt Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IInt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIOr Intrinsic,  Next: IIQint Intrinsic,  Prev: IInt Intrinsic,  Up: Other Intrinsics
-
-IIOr Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIOr' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIQint Intrinsic,  Next: IIQNnt Intrinsic,  Prev: IIOr Intrinsic,  Up: Other Intrinsics
-
-IIQint Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIQint' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIQNnt Intrinsic,  Next: IIShftC Intrinsic,  Prev: IIQint Intrinsic,  Up: Other Intrinsics
-
-IIQNnt Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIQNnt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IIShftC Intrinsic,  Next: IISign Intrinsic,  Prev: IIQNnt Intrinsic,  Up: Other Intrinsics
-
-IIShftC Intrinsic
-.................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IIShftC' to use this name for
-an external procedure.
-
-\1f
-File: g77.info,  Node: IISign Intrinsic,  Next: IMax0 Intrinsic,  Prev: IIShftC Intrinsic,  Up: Other Intrinsics
-
-IISign Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IISign' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IMax0 Intrinsic,  Next: IMax1 Intrinsic,  Prev: IISign Intrinsic,  Up: Other Intrinsics
-
-IMax0 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IMax0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IMax1 Intrinsic,  Next: IMin0 Intrinsic,  Prev: IMax0 Intrinsic,  Up: Other Intrinsics
-
-IMax1 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IMax1' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IMin0 Intrinsic,  Next: IMin1 Intrinsic,  Prev: IMax1 Intrinsic,  Up: Other Intrinsics
-
-IMin0 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IMin0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IMin1 Intrinsic,  Next: IMod Intrinsic,  Prev: IMin0 Intrinsic,  Up: Other Intrinsics
-
-IMin1 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IMin1' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IMod Intrinsic,  Next: INInt Intrinsic,  Prev: IMin1 Intrinsic,  Up: Other Intrinsics
-
-IMod Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IMod' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: INInt Intrinsic,  Next: INot Intrinsic,  Prev: IMod Intrinsic,  Up: Other Intrinsics
-
-INInt Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL INInt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: INot Intrinsic,  Next: IZExt Intrinsic,  Prev: INInt Intrinsic,  Up: Other Intrinsics
-
-INot Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL INot' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: IZExt Intrinsic,  Next: JIAbs Intrinsic,  Prev: INot Intrinsic,  Up: Other Intrinsics
-
-IZExt Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL IZExt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIAbs Intrinsic,  Next: JIAnd Intrinsic,  Prev: IZExt Intrinsic,  Up: Other Intrinsics
-
-JIAbs Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIAbs' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIAnd Intrinsic,  Next: JIBClr Intrinsic,  Prev: JIAbs Intrinsic,  Up: Other Intrinsics
-
-JIAnd Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIAnd' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIBClr Intrinsic,  Next: JIBits Intrinsic,  Prev: JIAnd Intrinsic,  Up: Other Intrinsics
-
-JIBClr Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIBClr' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIBits Intrinsic,  Next: JIBSet Intrinsic,  Prev: JIBClr Intrinsic,  Up: Other Intrinsics
-
-JIBits Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIBits' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIBSet Intrinsic,  Next: JIDiM Intrinsic,  Prev: JIBits Intrinsic,  Up: Other Intrinsics
-
-JIBSet Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIBSet' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIDiM Intrinsic,  Next: JIDInt Intrinsic,  Prev: JIBSet Intrinsic,  Up: Other Intrinsics
-
-JIDiM Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIDiM' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIDInt Intrinsic,  Next: JIDNnt Intrinsic,  Prev: JIDiM Intrinsic,  Up: Other Intrinsics
-
-JIDInt Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIDInt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIDNnt Intrinsic,  Next: JIEOr Intrinsic,  Prev: JIDInt Intrinsic,  Up: Other Intrinsics
-
-JIDNnt Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIDNnt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIEOr Intrinsic,  Next: JIFix Intrinsic,  Prev: JIDNnt Intrinsic,  Up: Other Intrinsics
-
-JIEOr Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIEOr' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIFix Intrinsic,  Next: JInt Intrinsic,  Prev: JIEOr Intrinsic,  Up: Other Intrinsics
-
-JIFix Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIFix' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JInt Intrinsic,  Next: JIOr Intrinsic,  Prev: JIFix Intrinsic,  Up: Other Intrinsics
-
-JInt Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JInt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIOr Intrinsic,  Next: JIQint Intrinsic,  Prev: JInt Intrinsic,  Up: Other Intrinsics
-
-JIOr Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIOr' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIQint Intrinsic,  Next: JIQNnt Intrinsic,  Prev: JIOr Intrinsic,  Up: Other Intrinsics
-
-JIQint Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIQint' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIQNnt Intrinsic,  Next: JIShft Intrinsic,  Prev: JIQint Intrinsic,  Up: Other Intrinsics
-
-JIQNnt Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIQNnt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIShft Intrinsic,  Next: JIShftC Intrinsic,  Prev: JIQNnt Intrinsic,  Up: Other Intrinsics
-
-JIShft Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIShft' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JIShftC Intrinsic,  Next: JISign Intrinsic,  Prev: JIShft Intrinsic,  Up: Other Intrinsics
-
-JIShftC Intrinsic
-.................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JIShftC' to use this name for
-an external procedure.
-
-\1f
-File: g77.info,  Node: JISign Intrinsic,  Next: JMax0 Intrinsic,  Prev: JIShftC Intrinsic,  Up: Other Intrinsics
-
-JISign Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JISign' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JMax0 Intrinsic,  Next: JMax1 Intrinsic,  Prev: JISign Intrinsic,  Up: Other Intrinsics
-
-JMax0 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JMax0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JMax1 Intrinsic,  Next: JMin0 Intrinsic,  Prev: JMax0 Intrinsic,  Up: Other Intrinsics
-
-JMax1 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JMax1' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JMin0 Intrinsic,  Next: JMin1 Intrinsic,  Prev: JMax1 Intrinsic,  Up: Other Intrinsics
-
-JMin0 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JMin0' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JMin1 Intrinsic,  Next: JMod Intrinsic,  Prev: JMin0 Intrinsic,  Up: Other Intrinsics
-
-JMin1 Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JMin1' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JMod Intrinsic,  Next: JNInt Intrinsic,  Prev: JMin1 Intrinsic,  Up: Other Intrinsics
-
-JMod Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JMod' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JNInt Intrinsic,  Next: JNot Intrinsic,  Prev: JMod Intrinsic,  Up: Other Intrinsics
-
-JNInt Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JNInt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JNot Intrinsic,  Next: JZExt Intrinsic,  Prev: JNInt Intrinsic,  Up: Other Intrinsics
-
-JNot Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JNot' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: JZExt Intrinsic,  Next: Kill Intrinsic (function),  Prev: JNot Intrinsic,  Up: Other Intrinsics
-
-JZExt Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL JZExt' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: Kill Intrinsic (function),  Next: Link Intrinsic (function),  Prev: JZExt Intrinsic,  Up: Other Intrinsics
-
-Kill Intrinsic (function)
-.........................
-
-     Kill(PID, SIGNAL)
-
-Kill: `INTEGER(KIND=1)' function.
-
-PID: `INTEGER'; scalar; INTENT(IN).
-
-SIGNAL: `INTEGER'; scalar; INTENT(IN).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Sends the signal specified by SIGNAL to the process PID.  Returns 0
-on success or a non-zero error code.  See `kill(2)'.
-
-   Due to the side effects performed by this intrinsic, the function
-form is not recommended.
-
-   For information on other intrinsics with the same name: *Note Kill
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: Link Intrinsic (function),  Next: QAbs Intrinsic,  Prev: Kill Intrinsic (function),  Up: Other Intrinsics
-
-Link Intrinsic (function)
-.........................
-
-     Link(PATH1, PATH2)
-
-Link: `INTEGER(KIND=1)' function.
-
-PATH1: `CHARACTER'; scalar; INTENT(IN).
-
-PATH2: `CHARACTER'; scalar; INTENT(IN).
-
-Intrinsic groups: `badu77'.
-
-Description:
-
-   Makes a (hard) link from file PATH1 to PATH2.  A null character
-(`CHAR(0)') marks the end of the names in PATH1 and PATH2--otherwise,
-trailing blanks in PATH1 and PATH2 are ignored.  Returns 0 on success
-or a non-zero error code.  See `link(2)'.
-
-   Due to the side effects performed by this intrinsic, the function
-form is not recommended.
-
-   For information on other intrinsics with the same name: *Note Link
-Intrinsic (subroutine)::.
-
-\1f
-File: g77.info,  Node: QAbs Intrinsic,  Next: QACos Intrinsic,  Prev: Link Intrinsic (function),  Up: Other Intrinsics
-
-QAbs Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QAbs' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QACos Intrinsic,  Next: QACosD Intrinsic,  Prev: QAbs Intrinsic,  Up: Other Intrinsics
-
-QACos Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QACos' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QACosD Intrinsic,  Next: QASin Intrinsic,  Prev: QACos Intrinsic,  Up: Other Intrinsics
-
-QACosD Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QACosD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QASin Intrinsic,  Next: QASinD Intrinsic,  Prev: QACosD Intrinsic,  Up: Other Intrinsics
-
-QASin Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QASin' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QASinD Intrinsic,  Next: QATan Intrinsic,  Prev: QASin Intrinsic,  Up: Other Intrinsics
-
-QASinD Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QASinD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QATan Intrinsic,  Next: QATan2 Intrinsic,  Prev: QASinD Intrinsic,  Up: Other Intrinsics
-
-QATan Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QATan' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QATan2 Intrinsic,  Next: QATan2D Intrinsic,  Prev: QATan Intrinsic,  Up: Other Intrinsics
-
-QATan2 Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QATan2' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QATan2D Intrinsic,  Next: QATanD Intrinsic,  Prev: QATan2 Intrinsic,  Up: Other Intrinsics
-
-QATan2D Intrinsic
-.................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QATan2D' to use this name for
-an external procedure.
-
-\1f
-File: g77.info,  Node: QATanD Intrinsic,  Next: QCos Intrinsic,  Prev: QATan2D Intrinsic,  Up: Other Intrinsics
-
-QATanD Intrinsic
-................
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QATanD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QCos Intrinsic,  Next: QCosD Intrinsic,  Prev: QATanD Intrinsic,  Up: Other Intrinsics
-
-QCos Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QCos' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QCosD Intrinsic,  Next: QCosH Intrinsic,  Prev: QCos Intrinsic,  Up: Other Intrinsics
-
-QCosD Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QCosD' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QCosH Intrinsic,  Next: QDiM Intrinsic,  Prev: QCosD Intrinsic,  Up: Other Intrinsics
-
-QCosH Intrinsic
-...............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QCosH' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QDiM Intrinsic,  Next: QExp Intrinsic,  Prev: QCosH Intrinsic,  Up: Other Intrinsics
-
-QDiM Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QDiM' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QExp Intrinsic,  Next: QExt Intrinsic,  Prev: QDiM Intrinsic,  Up: Other Intrinsics
-
-QExp Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QExp' to use this name for an
-external procedure.
-
-\1f
-File: g77.info,  Node: QExt Intrinsic,  Next: QExtD Intrinsic,  Prev: QExp Intrinsic,  Up: Other Intrinsics
-
-QExt Intrinsic
-..............
-
-   This intrinsic is not yet implemented.  The name is, however,
-reserved as an intrinsic.  Use `EXTERNAL QExt' to use this name for an
-external procedure.
-