--- /dev/null
+/* longlong.h -- definitions for mixed size 32/64 bit arithmetic.
+
+Copyright 1991, 1992, 1993, 1994, 1996, 1997, 1999, 2000, 2001, 2002, 2003,
+2004, 2005, 2007, 2008, 2009 Free Software Foundation, Inc.
+
+This file is free software; you can redistribute it and/or modify it under the
+terms of the GNU Lesser General Public License as published by the Free
+Software Foundation; either version 3 of the License, or (at your option) any
+later version.
+
+This file is distributed in the hope that it will be useful, but WITHOUT ANY
+WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+PARTICULAR PURPOSE. See the GNU Lesser General Public License for more
+details.
+
+You should have received a copy of the GNU Lesser General Public License
+along with this file. If not, see http://www.gnu.org/licenses/. */
+
+/* You have to define the following before including this file:
+
+ UWtype -- An unsigned type, default type for operations (typically a "word")
+ UHWtype -- An unsigned type, at least half the size of UWtype.
+ UDWtype -- An unsigned type, at least twice as large a UWtype
+ W_TYPE_SIZE -- size in bits of UWtype
+
+ SItype, USItype -- Signed and unsigned 32 bit types.
+ DItype, UDItype -- Signed and unsigned 64 bit types.
+
+ On a 32 bit machine UWtype should typically be USItype;
+ on a 64 bit machine, UWtype should typically be UDItype.
+
+ CAUTION! Using this file outside of GMP is not safe. You need to include
+ gmp.h and gmp-impl.h, or certain things might not work as expected.
+*/
+
+#define __BITS4 (W_TYPE_SIZE / 4)
+#define __ll_B ((UWtype) 1 << (W_TYPE_SIZE / 2))
+#define __ll_lowpart(t) ((UWtype) (t) & (__ll_B - 1))
+#define __ll_highpart(t) ((UWtype) (t) >> (W_TYPE_SIZE / 2))
+
+/* This is used to make sure no undesirable sharing between different libraries
+ that use this file takes place. */
+#ifndef __MPN
+#define __MPN(x) __##x
+#endif
+
+#ifndef _PROTO
+#if (__STDC__-0) || defined (__cplusplus)
+#define _PROTO(x) x
+#else
+#define _PROTO(x) ()
+#endif
+#endif
+
+/* Define auxiliary asm macros.
+
+ 1) umul_ppmm(high_prod, low_prod, multiplier, multiplicand) multiplies two
+ UWtype integers MULTIPLIER and MULTIPLICAND, and generates a two UWtype
+ word product in HIGH_PROD and LOW_PROD.
+
+ 2) __umulsidi3(a,b) multiplies two UWtype integers A and B, and returns a
+ UDWtype product. This is just a variant of umul_ppmm.
+
+ 3) udiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
+ denominator) divides a UDWtype, composed by the UWtype integers
+ HIGH_NUMERATOR and LOW_NUMERATOR, by DENOMINATOR and places the quotient
+ in QUOTIENT and the remainder in REMAINDER. HIGH_NUMERATOR must be less
+ than DENOMINATOR for correct operation. If, in addition, the most
+ significant bit of DENOMINATOR must be 1, then the pre-processor symbol
+ UDIV_NEEDS_NORMALIZATION is defined to 1.
+
+ 4) sdiv_qrnnd(quotient, remainder, high_numerator, low_numerator,
+ denominator). Like udiv_qrnnd but the numbers are signed. The quotient
+ is rounded towards 0.
+
+ 5) count_leading_zeros(count, x) counts the number of zero-bits from the
+ msb to the first non-zero bit in the UWtype X. This is the number of
+ steps X needs to be shifted left to set the msb. Undefined for X == 0,
+ unless the symbol COUNT_LEADING_ZEROS_0 is defined to some value.
+
+ 6) count_trailing_zeros(count, x) like count_leading_zeros, but counts
+ from the least significant end.
+
+ 7) add_ssaaaa(high_sum, low_sum, high_addend_1, low_addend_1,
+ high_addend_2, low_addend_2) adds two UWtype integers, composed by
+ HIGH_ADDEND_1 and LOW_ADDEND_1, and HIGH_ADDEND_2 and LOW_ADDEND_2
+ respectively. The result is placed in HIGH_SUM and LOW_SUM. Overflow
+ (i.e. carry out) is not stored anywhere, and is lost.
+
+ 8) sub_ddmmss(high_difference, low_difference, high_minuend, low_minuend,
+ high_subtrahend, low_subtrahend) subtracts two two-word UWtype integers,
+ composed by HIGH_MINUEND_1 and LOW_MINUEND_1, and HIGH_SUBTRAHEND_2 and
+ LOW_SUBTRAHEND_2 respectively. The result is placed in HIGH_DIFFERENCE
+ and LOW_DIFFERENCE. Overflow (i.e. carry out) is not stored anywhere,
+ and is lost.
+
+ If any of these macros are left undefined for a particular CPU,
+ C macros are used.
+
+
+ Notes:
+
+ For add_ssaaaa the two high and two low addends can both commute, but
+ unfortunately gcc only supports one "%" commutative in each asm block.
+ This has always been so but is only documented in recent versions
+ (eg. pre-release 3.3). Having two or more "%"s can cause an internal
+ compiler error in certain rare circumstances.
+
+ Apparently it was only the last "%" that was ever actually respected, so
+ the code has been updated to leave just that. Clearly there's a free
+ choice whether high or low should get it, if there's a reason to favour
+ one over the other. Also obviously when the constraints on the two
+ operands are identical there's no benefit to the reloader in any "%" at
+ all.
+
+ */
+
+/* The CPUs come in alphabetical order below.
+
+ Please add support for more CPUs here, or improve the current support
+ for the CPUs below! */
+
+
+/* count_leading_zeros_gcc_clz is count_leading_zeros implemented with gcc
+ 3.4 __builtin_clzl or __builtin_clzll, according to our limb size.
+ Similarly count_trailing_zeros_gcc_ctz using __builtin_ctzl or
+ __builtin_ctzll.
+
+ These builtins are only used when we check what code comes out, on some
+ chips they're merely libgcc calls, where we will instead want an inline
+ in that case (either asm or generic C).
+
+ These builtins are better than an asm block of the same insn, since an
+ asm block doesn't give gcc any information about scheduling or resource
+ usage. We keep an asm block for use on prior versions of gcc though.
+
+ For reference, __builtin_ffs existed in gcc prior to __builtin_clz, but
+ it's not used (for count_leading_zeros) because it generally gives extra
+ code to ensure the result is 0 when the input is 0, which we don't need
+ or want. */
+
+#ifdef _LONG_LONG_LIMB
+#define count_leading_zeros_gcc_clz(count,x) \
+ do { \
+ ASSERT ((x) != 0); \
+ (count) = __builtin_clzll (x); \
+ } while (0)
+#else
+#define count_leading_zeros_gcc_clz(count,x) \
+ do { \
+ ASSERT ((x) != 0); \
+ (count) = __builtin_clzl (x); \
+ } while (0)
+#endif
+
+#ifdef _LONG_LONG_LIMB
+#define count_trailing_zeros_gcc_ctz(count,x) \
+ do { \
+ ASSERT ((x) != 0); \
+ (count) = __builtin_ctzll (x); \
+ } while (0)
+#else
+#define count_trailing_zeros_gcc_ctz(count,x) \
+ do { \
+ ASSERT ((x) != 0); \
+ (count) = __builtin_ctzl (x); \
+ } while (0)
+#endif
+
+
+/* FIXME: The macros using external routines like __MPN(count_leading_zeros)
+ don't need to be under !NO_ASM */
+#if ! defined (NO_ASM)
+
+#if defined (__alpha) && W_TYPE_SIZE == 64
+/* Most alpha-based machines, except Cray systems. */
+#if defined (__GNUC__)
+#if __GMP_GNUC_PREREQ (3,3)
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ UDItype __m0 = (m0), __m1 = (m1); \
+ (ph) = __builtin_alpha_umulh (__m0, __m1); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#else
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ UDItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("umulh %r1,%2,%0" \
+ : "=r" (ph) \
+ : "%rJ" (m0), "rI" (m1)); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#endif
+#define UMUL_TIME 18
+#else /* ! __GNUC__ */
+#include <machine/builtins.h>
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ UDItype __m0 = (m0), __m1 = (m1); \
+ (ph) = __UMULH (m0, m1); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#endif
+#ifndef LONGLONG_STANDALONE
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { UWtype __di; \
+ __di = __MPN(invert_limb) (d); \
+ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \
+ } while (0)
+#define UDIV_PREINV_ALWAYS 1
+#define UDIV_NEEDS_NORMALIZATION 1
+#define UDIV_TIME 220
+#endif /* LONGLONG_STANDALONE */
+
+/* clz_tab is required in all configurations, since mpn/alpha/cntlz.asm
+ always goes into libgmp.so, even when not actually used. */
+#define COUNT_LEADING_ZEROS_NEED_CLZ_TAB
+
+#if defined (__GNUC__) && HAVE_HOST_CPU_alpha_CIX
+#define count_leading_zeros(COUNT,X) \
+ __asm__("ctlz %1,%0" : "=r"(COUNT) : "r"(X))
+#define count_trailing_zeros(COUNT,X) \
+ __asm__("cttz %1,%0" : "=r"(COUNT) : "r"(X))
+#endif /* clz/ctz using cix */
+
+#if ! defined (count_leading_zeros) \
+ && defined (__GNUC__) && ! defined (LONGLONG_STANDALONE)
+/* ALPHA_CMPBGE_0 gives "cmpbge $31,src,dst", ie. test src bytes == 0.
+ "$31" is written explicitly in the asm, since an "r" constraint won't
+ select reg 31. There seems no need to worry about "r31" syntax for cray,
+ since gcc itself (pre-release 3.4) emits just $31 in various places. */
+#define ALPHA_CMPBGE_0(dst, src) \
+ do { asm ("cmpbge $31, %1, %0" : "=r" (dst) : "r" (src)); } while (0)
+/* Zero bytes are turned into bits with cmpbge, a __clz_tab lookup counts
+ them, locating the highest non-zero byte. A second __clz_tab lookup
+ counts the leading zero bits in that byte, giving the result. */
+#define count_leading_zeros(count, x) \
+ do { \
+ UWtype __clz__b, __clz__c, __clz__x = (x); \
+ ALPHA_CMPBGE_0 (__clz__b, __clz__x); /* zero bytes */ \
+ __clz__b = __clz_tab [(__clz__b >> 1) ^ 0x7F]; /* 8 to 1 byte */ \
+ __clz__b = __clz__b * 8 - 7; /* 57 to 1 shift */ \
+ __clz__x >>= __clz__b; \
+ __clz__c = __clz_tab [__clz__x]; /* 8 to 1 bit */ \
+ __clz__b = 65 - __clz__b; \
+ (count) = __clz__b - __clz__c; \
+ } while (0)
+#define COUNT_LEADING_ZEROS_NEED_CLZ_TAB
+#endif /* clz using cmpbge */
+
+#if ! defined (count_leading_zeros) && ! defined (LONGLONG_STANDALONE)
+#if HAVE_ATTRIBUTE_CONST
+long __MPN(count_leading_zeros) _PROTO ((UDItype)) __attribute__ ((const));
+#else
+long __MPN(count_leading_zeros) _PROTO ((UDItype));
+#endif
+#define count_leading_zeros(count, x) \
+ ((count) = __MPN(count_leading_zeros) (x))
+#endif /* clz using mpn */
+#endif /* __alpha */
+
+#if defined (_CRAY) && W_TYPE_SIZE == 64
+#include <intrinsics.h>
+#define UDIV_PREINV_ALWAYS 1
+#define UDIV_NEEDS_NORMALIZATION 1
+#define UDIV_TIME 220
+long __MPN(count_leading_zeros) _PROTO ((UDItype));
+#define count_leading_zeros(count, x) \
+ ((count) = _leadz ((UWtype) (x)))
+#if defined (_CRAYIEEE) /* I.e., Cray T90/ieee, T3D, and T3E */
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ UDItype __m0 = (m0), __m1 = (m1); \
+ (ph) = _int_mult_upper (m0, m1); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#ifndef LONGLONG_STANDALONE
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { UWtype __di; \
+ __di = __MPN(invert_limb) (d); \
+ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \
+ } while (0)
+#endif /* LONGLONG_STANDALONE */
+#endif /* _CRAYIEEE */
+#endif /* _CRAY */
+
+#if defined (__ia64) && W_TYPE_SIZE == 64
+/* This form encourages gcc (pre-release 3.4 at least) to emit predicated
+ "sub r=r,r" and "sub r=r,r,1", giving a 2 cycle latency. The generic
+ code using "al<bl" arithmetically comes out making an actual 0 or 1 in a
+ register, which takes an extra cycle. */
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ do { \
+ UWtype __x; \
+ __x = (al) - (bl); \
+ if ((al) < (bl)) \
+ (sh) = (ah) - (bh) - 1; \
+ else \
+ (sh) = (ah) - (bh); \
+ (sl) = __x; \
+ } while (0)
+#if defined (__GNUC__) && ! defined (__INTEL_COMPILER)
+/* Do both product parts in assembly, since that gives better code with
+ all gcc versions. Some callers will just use the upper part, and in
+ that situation we waste an instruction, but not any cycles. */
+#define umul_ppmm(ph, pl, m0, m1) \
+ __asm__ ("xma.hu %0 = %2, %3, f0\n\txma.l %1 = %2, %3, f0" \
+ : "=&f" (ph), "=f" (pl) \
+ : "f" (m0), "f" (m1))
+#define UMUL_TIME 14
+#define count_leading_zeros(count, x) \
+ do { \
+ UWtype _x = (x), _y, _a, _c; \
+ __asm__ ("mux1 %0 = %1, @rev" : "=r" (_y) : "r" (_x)); \
+ __asm__ ("czx1.l %0 = %1" : "=r" (_a) : "r" (-_y | _y)); \
+ _c = (_a - 1) << 3; \
+ _x >>= _c; \
+ if (_x >= 1 << 4) \
+ _x >>= 4, _c += 4; \
+ if (_x >= 1 << 2) \
+ _x >>= 2, _c += 2; \
+ _c += _x >> 1; \
+ (count) = W_TYPE_SIZE - 1 - _c; \
+ } while (0)
+/* similar to what gcc does for __builtin_ffs, but 0 based rather than 1
+ based, and we don't need a special case for x==0 here */
+#define count_trailing_zeros(count, x) \
+ do { \
+ UWtype __ctz_x = (x); \
+ __asm__ ("popcnt %0 = %1" \
+ : "=r" (count) \
+ : "r" ((__ctz_x-1) & ~__ctz_x)); \
+ } while (0)
+#endif
+#if defined (__INTEL_COMPILER)
+#include <ia64intrin.h>
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ UWtype _m0 = (m0), _m1 = (m1); \
+ ph = _m64_xmahu (_m0, _m1, 0); \
+ pl = _m0 * _m1; \
+ } while (0)
+#endif
+#ifndef LONGLONG_STANDALONE
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { UWtype __di; \
+ __di = __MPN(invert_limb) (d); \
+ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \
+ } while (0)
+#define UDIV_PREINV_ALWAYS 1
+#define UDIV_NEEDS_NORMALIZATION 1
+#endif
+#define UDIV_TIME 220
+#endif
+
+
+#if defined (__GNUC__)
+
+/* We sometimes need to clobber "cc" with gcc2, but that would not be
+ understood by gcc1. Use cpp to avoid major code duplication. */
+#if __GNUC__ < 2
+#define __CLOBBER_CC
+#define __AND_CLOBBER_CC
+#else /* __GNUC__ >= 2 */
+#define __CLOBBER_CC : "cc"
+#define __AND_CLOBBER_CC , "cc"
+#endif /* __GNUC__ < 2 */
+
+#if (defined (__a29k__) || defined (_AM29K)) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add %1,%4,%5\n\taddc %0,%2,%3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "rI" (bh), "%r" (al), "rI" (bl))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub %1,%4,%5\n\tsubc %0,%2,%3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "rI" (bh), "r" (al), "rI" (bl))
+#define umul_ppmm(xh, xl, m0, m1) \
+ do { \
+ USItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("multiplu %0,%1,%2" \
+ : "=r" (xl) \
+ : "r" (__m0), "r" (__m1)); \
+ __asm__ ("multmu %0,%1,%2" \
+ : "=r" (xh) \
+ : "r" (__m0), "r" (__m1)); \
+ } while (0)
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ __asm__ ("dividu %0,%3,%4" \
+ : "=r" (q), "=q" (r) \
+ : "1" (n1), "r" (n0), "r" (d))
+#define count_leading_zeros(count, x) \
+ __asm__ ("clz %0,%1" \
+ : "=r" (count) \
+ : "r" (x))
+#define COUNT_LEADING_ZEROS_0 32
+#endif /* __a29k__ */
+
+#if defined (__arc__)
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add.f\t%1, %4, %5\n\tadc\t%0, %2, %3" \
+ : "=r" (sh), \
+ "=&r" (sl) \
+ : "r" ((USItype) (ah)), \
+ "rIJ" ((USItype) (bh)), \
+ "%r" ((USItype) (al)), \
+ "rIJ" ((USItype) (bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub.f\t%1, %4, %5\n\tsbc\t%0, %2, %3" \
+ : "=r" (sh), \
+ "=&r" (sl) \
+ : "r" ((USItype) (ah)), \
+ "rIJ" ((USItype) (bh)), \
+ "r" ((USItype) (al)), \
+ "rIJ" ((USItype) (bl)))
+#endif
+
+#if defined (__arm__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("adds\t%1, %4, %5\n\tadc\t%0, %2, %3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "rI" (bh), "%r" (al), "rI" (bl) __CLOBBER_CC)
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ do { \
+ if (__builtin_constant_p (al)) \
+ { \
+ if (__builtin_constant_p (ah)) \
+ __asm__ ("rsbs\t%1, %5, %4\n\trsc\t%0, %3, %2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rI" (ah), "r" (bh), "rI" (al), "r" (bl) __CLOBBER_CC); \
+ else \
+ __asm__ ("rsbs\t%1, %5, %4\n\tsbc\t%0, %2, %3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "rI" (bh), "rI" (al), "r" (bl) __CLOBBER_CC); \
+ } \
+ else if (__builtin_constant_p (ah)) \
+ { \
+ if (__builtin_constant_p (bl)) \
+ __asm__ ("subs\t%1, %4, %5\n\trsc\t%0, %3, %2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rI" (ah), "r" (bh), "r" (al), "rI" (bl) __CLOBBER_CC); \
+ else \
+ __asm__ ("rsbs\t%1, %5, %4\n\trsc\t%0, %3, %2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rI" (ah), "r" (bh), "rI" (al), "r" (bl) __CLOBBER_CC); \
+ } \
+ else if (__builtin_constant_p (bl)) \
+ { \
+ if (__builtin_constant_p (bh)) \
+ __asm__ ("subs\t%1, %4, %5\n\tsbc\t%0, %2, %3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "rI" (bh), "r" (al), "rI" (bl) __CLOBBER_CC); \
+ else \
+ __asm__ ("subs\t%1, %4, %5\n\trsc\t%0, %3, %2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rI" (ah), "r" (bh), "r" (al), "rI" (bl) __CLOBBER_CC); \
+ } \
+ else /* only bh might be a constant */ \
+ __asm__ ("subs\t%1, %4, %5\n\tsbc\t%0, %2, %3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "rI" (bh), "r" (al), "rI" (bl) __CLOBBER_CC);\
+ } while (0)
+#if 1 || defined (__arm_m__) /* `M' series has widening multiply support */
+#define umul_ppmm(xh, xl, a, b) \
+ __asm__ ("umull %0,%1,%2,%3" : "=&r" (xl), "=&r" (xh) : "r" (a), "r" (b))
+#define UMUL_TIME 5
+#define smul_ppmm(xh, xl, a, b) \
+ __asm__ ("smull %0,%1,%2,%3" : "=&r" (xl), "=&r" (xh) : "r" (a), "r" (b))
+#ifndef LONGLONG_STANDALONE
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { UWtype __di; \
+ __di = __MPN(invert_limb) (d); \
+ udiv_qrnnd_preinv (q, r, n1, n0, d, __di); \
+ } while (0)
+#define UDIV_PREINV_ALWAYS 1
+#define UDIV_NEEDS_NORMALIZATION 1
+#define UDIV_TIME 70
+#endif /* LONGLONG_STANDALONE */
+#else
+#define umul_ppmm(xh, xl, a, b) \
+ __asm__ ("%@ Inlined umul_ppmm\n" \
+" mov %|r0, %2, lsr #16\n" \
+" mov %|r2, %3, lsr #16\n" \
+" bic %|r1, %2, %|r0, lsl #16\n" \
+" bic %|r2, %3, %|r2, lsl #16\n" \
+" mul %1, %|r1, %|r2\n" \
+" mul %|r2, %|r0, %|r2\n" \
+" mul %|r1, %0, %|r1\n" \
+" mul %0, %|r0, %0\n" \
+" adds %|r1, %|r2, %|r1\n" \
+" addcs %0, %0, #65536\n" \
+" adds %1, %1, %|r1, lsl #16\n" \
+" adc %0, %0, %|r1, lsr #16" \
+ : "=&r" (xh), "=r" (xl) \
+ : "r" (a), "r" (b) \
+ : "r0", "r1", "r2")
+#define UMUL_TIME 20
+#ifndef LONGLONG_STANDALONE
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { UWtype __r; \
+ (q) = __MPN(udiv_qrnnd) (&__r, (n1), (n0), (d)); \
+ (r) = __r; \
+ } while (0)
+extern UWtype __MPN(udiv_qrnnd) _PROTO ((UWtype *, UWtype, UWtype, UWtype));
+#define UDIV_TIME 200
+#endif /* LONGLONG_STANDALONE */
+#endif
+#endif /* __arm__ */
+
+#if defined (__clipper__) && W_TYPE_SIZE == 32
+#define umul_ppmm(w1, w0, u, v) \
+ ({union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __x; \
+ __asm__ ("mulwux %2,%0" \
+ : "=r" (__x.__ll) \
+ : "%0" ((USItype)(u)), "r" ((USItype)(v))); \
+ (w1) = __x.__i.__h; (w0) = __x.__i.__l;})
+#define smul_ppmm(w1, w0, u, v) \
+ ({union {DItype __ll; \
+ struct {SItype __l, __h;} __i; \
+ } __x; \
+ __asm__ ("mulwx %2,%0" \
+ : "=r" (__x.__ll) \
+ : "%0" ((SItype)(u)), "r" ((SItype)(v))); \
+ (w1) = __x.__i.__h; (w0) = __x.__i.__l;})
+#define __umulsidi3(u, v) \
+ ({UDItype __w; \
+ __asm__ ("mulwux %2,%0" \
+ : "=r" (__w) : "%0" ((USItype)(u)), "r" ((USItype)(v))); \
+ __w; })
+#endif /* __clipper__ */
+
+/* Fujitsu vector computers. */
+#if defined (__uxp__) && W_TYPE_SIZE == 32
+#define umul_ppmm(ph, pl, u, v) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __asm__ ("mult.lu %1,%2,%0" : "=r" (__x.__ll) : "%r" (u), "rK" (v));\
+ (ph) = __x.__i.__h; \
+ (pl) = __x.__i.__l; \
+ } while (0)
+#define smul_ppmm(ph, pl, u, v) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __asm__ ("mult.l %1,%2,%0" : "=r" (__x.__ll) : "%r" (u), "rK" (v)); \
+ (ph) = __x.__i.__h; \
+ (pl) = __x.__i.__l; \
+ } while (0)
+#endif
+
+#if defined (__gmicro__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add.w %5,%1\n\taddx %3,%0" \
+ : "=g" (sh), "=&g" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "%1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub.w %5,%1\n\tsubx %3,%0" \
+ : "=g" (sh), "=&g" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define umul_ppmm(ph, pl, m0, m1) \
+ __asm__ ("mulx %3,%0,%1" \
+ : "=g" (ph), "=r" (pl) \
+ : "%0" ((USItype)(m0)), "g" ((USItype)(m1)))
+#define udiv_qrnnd(q, r, nh, nl, d) \
+ __asm__ ("divx %4,%0,%1" \
+ : "=g" (q), "=r" (r) \
+ : "1" ((USItype)(nh)), "0" ((USItype)(nl)), "g" ((USItype)(d)))
+#define count_leading_zeros(count, x) \
+ __asm__ ("bsch/1 %1,%0" \
+ : "=g" (count) : "g" ((USItype)(x)), "0" ((USItype)0))
+#endif
+
+#if defined (__hppa) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add%I5 %5,%r4,%1\n\taddc %r2,%r3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rM" (ah), "rM" (bh), "%rM" (al), "rI" (bl))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub%I4 %4,%r5,%1\n\tsubb %r2,%r3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rM" (ah), "rM" (bh), "rI" (al), "rM" (bl))
+#if defined (_PA_RISC1_1)
+#define umul_ppmm(wh, wl, u, v) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __asm__ ("xmpyu %1,%2,%0" : "=*f" (__x.__ll) : "*f" (u), "*f" (v)); \
+ (wh) = __x.__i.__h; \
+ (wl) = __x.__i.__l; \
+ } while (0)
+#define UMUL_TIME 8
+#define UDIV_TIME 60
+#else
+#define UMUL_TIME 40
+#define UDIV_TIME 80
+#endif
+#define count_leading_zeros(count, x) \
+ do { \
+ USItype __tmp; \
+ __asm__ ( \
+ "ldi 1,%0\n" \
+" extru,= %1,15,16,%%r0 ; Bits 31..16 zero?\n" \
+" extru,tr %1,15,16,%1 ; No. Shift down, skip add.\n" \
+" ldo 16(%0),%0 ; Yes. Perform add.\n" \
+" extru,= %1,23,8,%%r0 ; Bits 15..8 zero?\n" \
+" extru,tr %1,23,8,%1 ; No. Shift down, skip add.\n" \
+" ldo 8(%0),%0 ; Yes. Perform add.\n" \
+" extru,= %1,27,4,%%r0 ; Bits 7..4 zero?\n" \
+" extru,tr %1,27,4,%1 ; No. Shift down, skip add.\n" \
+" ldo 4(%0),%0 ; Yes. Perform add.\n" \
+" extru,= %1,29,2,%%r0 ; Bits 3..2 zero?\n" \
+" extru,tr %1,29,2,%1 ; No. Shift down, skip add.\n" \
+" ldo 2(%0),%0 ; Yes. Perform add.\n" \
+" extru %1,30,1,%1 ; Extract bit 1.\n" \
+" sub %0,%1,%0 ; Subtract it.\n" \
+ : "=r" (count), "=r" (__tmp) : "1" (x)); \
+ } while (0)
+#endif /* hppa */
+
+/* These macros are for ABI=2.0w. In ABI=2.0n they can't be used, since GCC
+ (3.2) puts longlong into two adjacent 32-bit registers. Presumably this
+ is just a case of no direct support for 2.0n but treating it like 1.0. */
+#if defined (__hppa) && W_TYPE_SIZE == 64 && ! defined (_LONG_LONG_LIMB)
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add%I5 %5,%r4,%1\n\tadd,dc %r2,%r3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rM" (ah), "rM" (bh), "%rM" (al), "rI" (bl))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub%I4 %4,%r5,%1\n\tsub,db %r2,%r3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rM" (ah), "rM" (bh), "rI" (al), "rM" (bl))
+#endif /* hppa */
+
+#if (defined (__i370__) || defined (__s390__) || defined (__mvs__)) && W_TYPE_SIZE == 32
+#define smul_ppmm(xh, xl, m0, m1) \
+ do { \
+ union {DItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __asm__ ("lr %N0,%1\n\tmr %0,%2" \
+ : "=&r" (__x.__ll) \
+ : "r" (m0), "r" (m1)); \
+ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \
+ } while (0)
+#define sdiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ union {DItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __x.__i.__h = n1; __x.__i.__l = n0; \
+ __asm__ ("dr %0,%2" \
+ : "=r" (__x.__ll) \
+ : "0" (__x.__ll), "r" (d)); \
+ (q) = __x.__i.__l; (r) = __x.__i.__h; \
+ } while (0)
+#endif
+
+#if (defined (__i386__) || defined (__i486__)) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("addl %5,%k1\n\tadcl %3,%k0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "%1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("subl %5,%k1\n\tsbbl %3,%k0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mull %3" \
+ : "=a" (w0), "=d" (w1) \
+ : "%0" ((USItype)(u)), "rm" ((USItype)(v)))
+#define udiv_qrnnd(q, r, n1, n0, dx) /* d renamed to dx avoiding "=d" */\
+ __asm__ ("divl %4" /* stringification in K&R C */ \
+ : "=a" (q), "=d" (r) \
+ : "0" ((USItype)(n0)), "1" ((USItype)(n1)), "rm" ((USItype)(dx)))
+
+#if HAVE_HOST_CPU_i586 || HAVE_HOST_CPU_pentium || HAVE_HOST_CPU_pentiummmx
+/* Pentium bsrl takes between 10 and 72 cycles depending where the most
+ significant 1 bit is, hence the use of the following alternatives. bsfl
+ is slow too, between 18 and 42 depending where the least significant 1
+ bit is, so let the generic count_trailing_zeros below make use of the
+ count_leading_zeros here too. */
+
+#if HAVE_HOST_CPU_pentiummmx && ! defined (LONGLONG_STANDALONE)
+/* The following should be a fixed 14 or 15 cycles, but possibly plus an L1
+ cache miss reading from __clz_tab. For P55 it's favoured over the float
+ below so as to avoid mixing MMX and x87, since the penalty for switching
+ between the two is about 100 cycles.
+
+ The asm block sets __shift to -3 if the high 24 bits are clear, -2 for
+ 16, -1 for 8, or 0 otherwise. This could be written equivalently as
+ follows, but as of gcc 2.95.2 it results in conditional jumps.
+
+ __shift = -(__n < 0x1000000);
+ __shift -= (__n < 0x10000);
+ __shift -= (__n < 0x100);
+
+ The middle two sbbl and cmpl's pair, and with luck something gcc
+ generates might pair with the first cmpl and the last sbbl. The "32+1"
+ constant could be folded into __clz_tab[], but it doesn't seem worth
+ making a different table just for that. */
+
+#define count_leading_zeros(c,n) \
+ do { \
+ USItype __n = (n); \
+ USItype __shift; \
+ __asm__ ("cmpl $0x1000000, %1\n" \
+ "sbbl %0, %0\n" \
+ "cmpl $0x10000, %1\n" \
+ "sbbl $0, %0\n" \
+ "cmpl $0x100, %1\n" \
+ "sbbl $0, %0\n" \
+ : "=&r" (__shift) : "r" (__n)); \
+ __shift = __shift*8 + 24 + 1; \
+ (c) = 32 + 1 - __shift - __clz_tab[__n >> __shift]; \
+ } while (0)
+#define COUNT_LEADING_ZEROS_NEED_CLZ_TAB
+#define COUNT_LEADING_ZEROS_0 31 /* n==0 indistinguishable from n==1 */
+
+#else /* ! pentiummmx || LONGLONG_STANDALONE */
+/* The following should be a fixed 14 cycles or so. Some scheduling
+ opportunities should be available between the float load/store too. This
+ sort of code is used in gcc 3 for __builtin_ffs (with "n&-n") and is
+ apparently suggested by the Intel optimizing manual (don't know exactly
+ where). gcc 2.95 or up will be best for this, so the "double" is
+ correctly aligned on the stack. */
+#define count_leading_zeros(c,n) \
+ do { \
+ union { \
+ double d; \
+ unsigned a[2]; \
+ } __u; \
+ ASSERT ((n) != 0); \
+ __u.d = (UWtype) (n); \
+ (c) = 0x3FF + 31 - (__u.a[1] >> 20); \
+ } while (0)
+#define COUNT_LEADING_ZEROS_0 (0x3FF + 31)
+#endif /* pentiummx */
+
+#else /* ! pentium */
+
+#if __GMP_GNUC_PREREQ (3,4) /* using bsrl */
+#define count_leading_zeros(count,x) count_leading_zeros_gcc_clz(count,x)
+#endif /* gcc clz */
+
+/* On P6, gcc prior to 3.0 generates a partial register stall for
+ __cbtmp^31, due to using "xorb $31" instead of "xorl $31", the former
+ being 1 code byte smaller. "31-__cbtmp" is a workaround, probably at the
+ cost of one extra instruction. Do this for "i386" too, since that means
+ generic x86. */
+#if ! defined (count_leading_zeros) && __GNUC__ < 3 \
+ && (HAVE_HOST_CPU_i386 \
+ || HAVE_HOST_CPU_i686 \
+ || HAVE_HOST_CPU_pentiumpro \
+ || HAVE_HOST_CPU_pentium2 \
+ || HAVE_HOST_CPU_pentium3)
+#define count_leading_zeros(count, x) \
+ do { \
+ USItype __cbtmp; \
+ ASSERT ((x) != 0); \
+ __asm__ ("bsrl %1,%0" : "=r" (__cbtmp) : "rm" ((USItype)(x))); \
+ (count) = 31 - __cbtmp; \
+ } while (0)
+#endif /* gcc<3 asm bsrl */
+
+#ifndef count_leading_zeros
+#define count_leading_zeros(count, x) \
+ do { \
+ USItype __cbtmp; \
+ ASSERT ((x) != 0); \
+ __asm__ ("bsrl %1,%0" : "=r" (__cbtmp) : "rm" ((USItype)(x))); \
+ (count) = __cbtmp ^ 31; \
+ } while (0)
+#endif /* asm bsrl */
+
+#if __GMP_GNUC_PREREQ (3,4) /* using bsfl */
+#define count_trailing_zeros(count,x) count_trailing_zeros_gcc_ctz(count,x)
+#endif /* gcc ctz */
+
+#ifndef count_trailing_zeros
+#define count_trailing_zeros(count, x) \
+ do { \
+ ASSERT ((x) != 0); \
+ __asm__ ("bsfl %1,%k0" : "=r" (count) : "rm" ((USItype)(x))); \
+ } while (0)
+#endif /* asm bsfl */
+
+#endif /* ! pentium */
+
+#ifndef UMUL_TIME
+#define UMUL_TIME 10
+#endif
+#ifndef UDIV_TIME
+#define UDIV_TIME 40
+#endif
+#endif /* 80x86 */
+
+#if defined (__amd64__) && W_TYPE_SIZE == 64
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("addq %5,%q1\n\tadcq %3,%q0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((UDItype)(ah)), "rme" ((UDItype)(bh)), \
+ "%1" ((UDItype)(al)), "rme" ((UDItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("subq %5,%q1\n\tsbbq %3,%q0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((UDItype)(ah)), "rme" ((UDItype)(bh)), \
+ "1" ((UDItype)(al)), "rme" ((UDItype)(bl)))
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mulq %3" \
+ : "=a" (w0), "=d" (w1) \
+ : "%0" ((UDItype)(u)), "rm" ((UDItype)(v)))
+#define udiv_qrnnd(q, r, n1, n0, dx) /* d renamed to dx avoiding "=d" */\
+ __asm__ ("divq %4" /* stringification in K&R C */ \
+ : "=a" (q), "=d" (r) \
+ : "0" ((UDItype)(n0)), "1" ((UDItype)(n1)), "rm" ((UDItype)(dx)))
+/* bsrq destination must be a 64-bit register, hence UDItype for __cbtmp. */
+#define count_leading_zeros(count, x) \
+ do { \
+ UDItype __cbtmp; \
+ ASSERT ((x) != 0); \
+ __asm__ ("bsrq %1,%0" : "=r" (__cbtmp) : "rm" ((UDItype)(x))); \
+ (count) = __cbtmp ^ 63; \
+ } while (0)
+/* bsfq destination must be a 64-bit register, "%q0" forces this in case
+ count is only an int. */
+#define count_trailing_zeros(count, x) \
+ do { \
+ ASSERT ((x) != 0); \
+ __asm__ ("bsfq %1,%q0" : "=r" (count) : "rm" ((UDItype)(x))); \
+ } while (0)
+#endif /* x86_64 */
+
+#if defined (__i860__) && W_TYPE_SIZE == 32
+#define rshift_rhlc(r,h,l,c) \
+ __asm__ ("shr %3,r0,r0\;shrd %1,%2,%0" \
+ "=r" (r) : "r" (h), "r" (l), "rn" (c))
+#endif /* i860 */
+
+#if defined (__i960__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("cmpo 1,0\;addc %5,%4,%1\;addc %3,%2,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "dI" (ah), "dI" (bh), "%dI" (al), "dI" (bl))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("cmpo 0,0\;subc %5,%4,%1\;subc %3,%2,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "dI" (ah), "dI" (bh), "dI" (al), "dI" (bl))
+#define umul_ppmm(w1, w0, u, v) \
+ ({union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __x; \
+ __asm__ ("emul %2,%1,%0" \
+ : "=d" (__x.__ll) : "%dI" (u), "dI" (v)); \
+ (w1) = __x.__i.__h; (w0) = __x.__i.__l;})
+#define __umulsidi3(u, v) \
+ ({UDItype __w; \
+ __asm__ ("emul %2,%1,%0" : "=d" (__w) : "%dI" (u), "dI" (v)); \
+ __w; })
+#define udiv_qrnnd(q, r, nh, nl, d) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __nn; \
+ __nn.__i.__h = (nh); __nn.__i.__l = (nl); \
+ __asm__ ("ediv %d,%n,%0" \
+ : "=d" (__rq.__ll) : "dI" (__nn.__ll), "dI" (d)); \
+ (r) = __rq.__i.__l; (q) = __rq.__i.__h; \
+ } while (0)
+#define count_leading_zeros(count, x) \
+ do { \
+ USItype __cbtmp; \
+ __asm__ ("scanbit %1,%0" : "=r" (__cbtmp) : "r" (x)); \
+ (count) = __cbtmp ^ 31; \
+ } while (0)
+#define COUNT_LEADING_ZEROS_0 (-32) /* sic */
+#if defined (__i960mx) /* what is the proper symbol to test??? */
+#define rshift_rhlc(r,h,l,c) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __nn; \
+ __nn.__i.__h = (h); __nn.__i.__l = (l); \
+ __asm__ ("shre %2,%1,%0" : "=d" (r) : "dI" (__nn.__ll), "dI" (c)); \
+ }
+#endif /* i960mx */
+#endif /* i960 */
+
+#if (defined (__mc68000__) || defined (__mc68020__) || defined(mc68020) \
+ || defined (__m68k__) || defined (__mc5200__) || defined (__mc5206e__) \
+ || defined (__mc5307__)) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add%.l %5,%1\n\taddx%.l %3,%0" \
+ : "=d" (sh), "=&d" (sl) \
+ : "0" ((USItype)(ah)), "d" ((USItype)(bh)), \
+ "%1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub%.l %5,%1\n\tsubx%.l %3,%0" \
+ : "=d" (sh), "=&d" (sl) \
+ : "0" ((USItype)(ah)), "d" ((USItype)(bh)), \
+ "1" ((USItype)(al)), "g" ((USItype)(bl)))
+/* The '020, '030, '040 and CPU32 have 32x32->64 and 64/32->32q-32r. */
+#if defined (__mc68020__) || defined(mc68020) \
+ || defined (__mc68030__) || defined (mc68030) \
+ || defined (__mc68040__) || defined (mc68040) \
+ || defined (__mcpu32__) || defined (mcpu32) \
+ || defined (__NeXT__)
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mulu%.l %3,%1:%0" \
+ : "=d" (w0), "=d" (w1) \
+ : "%0" ((USItype)(u)), "dmi" ((USItype)(v)))
+#define UMUL_TIME 45
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ __asm__ ("divu%.l %4,%1:%0" \
+ : "=d" (q), "=d" (r) \
+ : "0" ((USItype)(n0)), "1" ((USItype)(n1)), "dmi" ((USItype)(d)))
+#define UDIV_TIME 90
+#define sdiv_qrnnd(q, r, n1, n0, d) \
+ __asm__ ("divs%.l %4,%1:%0" \
+ : "=d" (q), "=d" (r) \
+ : "0" ((USItype)(n0)), "1" ((USItype)(n1)), "dmi" ((USItype)(d)))
+#else /* for other 68k family members use 16x16->32 multiplication */
+#define umul_ppmm(xh, xl, a, b) \
+ do { USItype __umul_tmp1, __umul_tmp2; \
+ __asm__ ("| Inlined umul_ppmm\n" \
+" move%.l %5,%3\n" \
+" move%.l %2,%0\n" \
+" move%.w %3,%1\n" \
+" swap %3\n" \
+" swap %0\n" \
+" mulu%.w %2,%1\n" \
+" mulu%.w %3,%0\n" \
+" mulu%.w %2,%3\n" \
+" swap %2\n" \
+" mulu%.w %5,%2\n" \
+" add%.l %3,%2\n" \
+" jcc 1f\n" \
+" add%.l %#0x10000,%0\n" \
+"1: move%.l %2,%3\n" \
+" clr%.w %2\n" \
+" swap %2\n" \
+" swap %3\n" \
+" clr%.w %3\n" \
+" add%.l %3,%1\n" \
+" addx%.l %2,%0\n" \
+" | End inlined umul_ppmm" \
+ : "=&d" (xh), "=&d" (xl), \
+ "=d" (__umul_tmp1), "=&d" (__umul_tmp2) \
+ : "%2" ((USItype)(a)), "d" ((USItype)(b))); \
+ } while (0)
+#define UMUL_TIME 100
+#define UDIV_TIME 400
+#endif /* not mc68020 */
+/* The '020, '030, '040 and '060 have bitfield insns.
+ GCC 3.4 defines __mc68020__ when in CPU32 mode, check for __mcpu32__ to
+ exclude bfffo on that chip (bitfield insns not available). */
+#if (defined (__mc68020__) || defined (mc68020) \
+ || defined (__mc68030__) || defined (mc68030) \
+ || defined (__mc68040__) || defined (mc68040) \
+ || defined (__mc68060__) || defined (mc68060) \
+ || defined (__NeXT__)) \
+ && ! defined (__mcpu32__)
+#define count_leading_zeros(count, x) \
+ __asm__ ("bfffo %1{%b2:%b2},%0" \
+ : "=d" (count) \
+ : "od" ((USItype) (x)), "n" (0))
+#define COUNT_LEADING_ZEROS_0 32
+#endif
+#endif /* mc68000 */
+
+#if defined (__m88000__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("addu.co %1,%r4,%r5\n\taddu.ci %0,%r2,%r3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rJ" (ah), "rJ" (bh), "%rJ" (al), "rJ" (bl))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("subu.co %1,%r4,%r5\n\tsubu.ci %0,%r2,%r3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rJ" (ah), "rJ" (bh), "rJ" (al), "rJ" (bl))
+#define count_leading_zeros(count, x) \
+ do { \
+ USItype __cbtmp; \
+ __asm__ ("ff1 %0,%1" : "=r" (__cbtmp) : "r" (x)); \
+ (count) = __cbtmp ^ 31; \
+ } while (0)
+#define COUNT_LEADING_ZEROS_0 63 /* sic */
+#if defined (__m88110__)
+#define umul_ppmm(wh, wl, u, v) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __asm__ ("mulu.d %0,%1,%2" : "=r" (__x.__ll) : "r" (u), "r" (v)); \
+ (wh) = __x.__i.__h; \
+ (wl) = __x.__i.__l; \
+ } while (0)
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ ({union {UDItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x, __q; \
+ __x.__i.__h = (n1); __x.__i.__l = (n0); \
+ __asm__ ("divu.d %0,%1,%2" \
+ : "=r" (__q.__ll) : "r" (__x.__ll), "r" (d)); \
+ (r) = (n0) - __q.__l * (d); (q) = __q.__l; })
+#define UMUL_TIME 5
+#define UDIV_TIME 25
+#else
+#define UMUL_TIME 17
+#define UDIV_TIME 150
+#endif /* __m88110__ */
+#endif /* __m88000__ */
+
+#if defined (__mips) && W_TYPE_SIZE == 32
+#if __GMP_GNUC_PREREQ (4,4)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UDItype __ll = (UDItype)(u) * (v); \
+ w1 = __ll >> 32; \
+ w0 = __ll; \
+ } while (0)
+#endif
+#if !defined (umul_ppmm) && __GMP_GNUC_PREREQ (2,7)
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("multu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
+#endif
+#if !defined (umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("multu %2,%3\n\tmflo %0\n\tmfhi %1" \
+ : "=d" (w0), "=d" (w1) : "d" (u), "d" (v))
+#endif
+#define UMUL_TIME 10
+#define UDIV_TIME 100
+#endif /* __mips */
+
+#if (defined (__mips) && __mips >= 3) && W_TYPE_SIZE == 64
+#if __GMP_GNUC_PREREQ (4,4)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \
+ __ll_UTItype __ll = (__ll_UTItype)(u) * (v); \
+ w1 = __ll >> 64; \
+ w0 = __ll; \
+ } while (0)
+#endif
+#if !defined (umul_ppmm) && __GMP_GNUC_PREREQ (2,7)
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("dmultu %2,%3" : "=l" (w0), "=h" (w1) : "d" (u), "d" (v))
+#endif
+#if !defined (umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("dmultu %2,%3\n\tmflo %0\n\tmfhi %1" \
+ : "=d" (w0), "=d" (w1) : "d" (u), "d" (v))
+#endif
+#define UMUL_TIME 20
+#define UDIV_TIME 140
+#endif /* __mips */
+
+#if defined (__mmix__) && W_TYPE_SIZE == 64
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("MULU %0,%2,%3" : "=r" (w0), "=z" (w1) : "r" (u), "r" (v))
+#endif
+
+#if defined (__ns32000__) && W_TYPE_SIZE == 32
+#define umul_ppmm(w1, w0, u, v) \
+ ({union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __x; \
+ __asm__ ("meid %2,%0" \
+ : "=g" (__x.__ll) \
+ : "%0" ((USItype)(u)), "g" ((USItype)(v))); \
+ (w1) = __x.__i.__h; (w0) = __x.__i.__l;})
+#define __umulsidi3(u, v) \
+ ({UDItype __w; \
+ __asm__ ("meid %2,%0" \
+ : "=g" (__w) \
+ : "%0" ((USItype)(u)), "g" ((USItype)(v))); \
+ __w; })
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ ({union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __x; \
+ __x.__i.__h = (n1); __x.__i.__l = (n0); \
+ __asm__ ("deid %2,%0" \
+ : "=g" (__x.__ll) \
+ : "0" (__x.__ll), "g" ((USItype)(d))); \
+ (r) = __x.__i.__l; (q) = __x.__i.__h; })
+#define count_trailing_zeros(count,x) \
+ do { \
+ __asm__ ("ffsd %2,%0" \
+ : "=r" (count) \
+ : "0" ((USItype) 0), "r" ((USItype) (x))); \
+ } while (0)
+#endif /* __ns32000__ */
+
+/* In the past we had a block of various #defines tested
+ _ARCH_PPC - AIX
+ _ARCH_PWR - AIX
+ __powerpc__ - gcc
+ __POWERPC__ - BEOS
+ __ppc__ - Darwin
+ PPC - old gcc, GNU/Linux, SysV
+ The plain PPC test was not good for vxWorks, since PPC is defined on all
+ CPUs there (eg. m68k too), as a constant one is expected to compare
+ CPU_FAMILY against.
+
+ At any rate, this was pretty unattractive and a bit fragile. The use of
+ HAVE_HOST_CPU_FAMILY is designed to cut through it all and be sure of
+ getting the desired effect.
+
+ ENHANCE-ME: We should test _IBMR2 here when we add assembly support for
+ the system vendor compilers. (Is that vendor compilers with inline asm,
+ or what?) */
+
+#if (HAVE_HOST_CPU_FAMILY_power || HAVE_HOST_CPU_FAMILY_powerpc) \
+ && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ do { \
+ if (__builtin_constant_p (bh) && (bh) == 0) \
+ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
+ else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \
+ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
+ else \
+ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \
+ } while (0)
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ do { \
+ if (__builtin_constant_p (ah) && (ah) == 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
+ else if (__builtin_constant_p (ah) && (ah) == ~(USItype) 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl));\
+ else if (__builtin_constant_p (bh) && (bh) == 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
+ else if (__builtin_constant_p (bh) && (bh) == ~(USItype) 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl));\
+ else \
+ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \
+ } while (0)
+#define count_leading_zeros(count, x) \
+ __asm__ ("{cntlz|cntlzw} %0,%1" : "=r" (count) : "r" (x))
+#define COUNT_LEADING_ZEROS_0 32
+#if HAVE_HOST_CPU_FAMILY_powerpc
+#if __GMP_GNUC_PREREQ (4,4)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UDItype __ll = (UDItype)(u) * (v); \
+ w1 = __ll >> 32; \
+ w0 = __ll; \
+ } while (0)
+#endif
+#if !defined (umul_ppmm)
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ USItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("mulhwu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#endif
+#define UMUL_TIME 15
+#define smul_ppmm(ph, pl, m0, m1) \
+ do { \
+ SItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("mulhw %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#define SMUL_TIME 14
+#define UDIV_TIME 120
+#else
+#define UMUL_TIME 8
+#define smul_ppmm(xh, xl, m0, m1) \
+ __asm__ ("mul %0,%2,%3" : "=r" (xh), "=q" (xl) : "r" (m0), "r" (m1))
+#define SMUL_TIME 4
+#define sdiv_qrnnd(q, r, nh, nl, d) \
+ __asm__ ("div %0,%2,%4" : "=r" (q), "=q" (r) : "r" (nh), "1" (nl), "r" (d))
+#define UDIV_TIME 100
+#endif
+#endif /* 32-bit POWER architecture variants. */
+
+/* We should test _IBMR2 here when we add assembly support for the system
+ vendor compilers. */
+#if HAVE_HOST_CPU_FAMILY_powerpc && W_TYPE_SIZE == 64
+#if !defined (_LONG_LONG_LIMB)
+/* _LONG_LONG_LIMB is ABI=mode32 where adde operates on 32-bit values. So
+ use adde etc only when not _LONG_LONG_LIMB. */
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ do { \
+ if (__builtin_constant_p (bh) && (bh) == 0) \
+ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{aze|addze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
+ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \
+ __asm__ ("{a%I4|add%I4c} %1,%3,%4\n\t{ame|addme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "%r" (al), "rI" (bl));\
+ else \
+ __asm__ ("{a%I5|add%I5c} %1,%4,%5\n\t{ae|adde} %0,%2,%3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "r" (bh), "%r" (al), "rI" (bl)); \
+ } while (0)
+/* We use "*rI" for the constant operand here, since with just "I", gcc barfs.
+ This might seem strange, but gcc folds away the dead code late. */
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ do { \
+ if (__builtin_constant_p (bl) && bl > -0x8000 && bl <= 0x8000) { \
+ if (__builtin_constant_p (ah) && (ah) == 0) \
+ __asm__ ("{ai|addic} %1,%3,%4\n\t{sfze|subfze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "*rI" (-bl)); \
+ else if (__builtin_constant_p (ah) && (ah) == ~(UDItype) 0) \
+ __asm__ ("{ai|addic} %1,%3,%4\n\t{sfme|subfme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "*rI" (-bl)); \
+ else if (__builtin_constant_p (bh) && (bh) == 0) \
+ __asm__ ("{ai|addic} %1,%3,%4\n\t{ame|addme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "*rI" (-bl)); \
+ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \
+ __asm__ ("{ai|addic} %1,%3,%4\n\t{aze|addze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "*rI" (-bl)); \
+ else \
+ __asm__ ("{ai|addic} %1,%4,%5\n\t{sfe|subfe} %0,%3,%2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "r" (bh), "rI" (al), "*rI" (-bl)); \
+ } else { \
+ if (__builtin_constant_p (ah) && (ah) == 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfze|subfze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl)); \
+ else if (__builtin_constant_p (ah) && (ah) == ~(UDItype) 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{sfme|subfme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (bh), "rI" (al), "r" (bl)); \
+ else if (__builtin_constant_p (bh) && (bh) == 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{ame|addme} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl)); \
+ else if (__builtin_constant_p (bh) && (bh) == ~(UDItype) 0) \
+ __asm__ ("{sf%I3|subf%I3c} %1,%4,%3\n\t{aze|addze} %0,%2" \
+ : "=r" (sh), "=&r" (sl) : "r" (ah), "rI" (al), "r" (bl)); \
+ else \
+ __asm__ ("{sf%I4|subf%I4c} %1,%5,%4\n\t{sfe|subfe} %0,%3,%2" \
+ : "=r" (sh), "=&r" (sl) \
+ : "r" (ah), "r" (bh), "rI" (al), "r" (bl)); \
+ } \
+ } while (0)
+#endif /* ! _LONG_LONG_LIMB */
+#define count_leading_zeros(count, x) \
+ __asm__ ("cntlzd %0,%1" : "=r" (count) : "r" (x))
+#define COUNT_LEADING_ZEROS_0 64
+#if __GMP_GNUC_PREREQ (4,4)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ typedef unsigned int __ll_UTItype __attribute__((mode(TI))); \
+ __ll_UTItype __ll = (__ll_UTItype)(u) * (v); \
+ w1 = __ll >> 64; \
+ w0 = __ll; \
+ } while (0)
+#endif
+#if !defined (umul_ppmm)
+#define umul_ppmm(ph, pl, m0, m1) \
+ do { \
+ UDItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("mulhdu %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#endif
+#define UMUL_TIME 15
+#define smul_ppmm(ph, pl, m0, m1) \
+ do { \
+ DItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("mulhd %0,%1,%2" : "=r" (ph) : "%r" (m0), "r" (m1)); \
+ (pl) = __m0 * __m1; \
+ } while (0)
+#define SMUL_TIME 14 /* ??? */
+#define UDIV_TIME 120 /* ??? */
+#endif /* 64-bit PowerPC. */
+
+#if defined (__pyr__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("addw %5,%1\n\taddwc %3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "%1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("subw %5,%1\n\tsubwb %3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "1" ((USItype)(al)), "g" ((USItype)(bl)))
+/* This insn works on Pyramids with AP, XP, or MI CPUs, but not with SP. */
+#define umul_ppmm(w1, w0, u, v) \
+ ({union {UDItype __ll; \
+ struct {USItype __h, __l;} __i; \
+ } __x; \
+ __asm__ ("movw %1,%R0\n\tuemul %2,%0" \
+ : "=&r" (__x.__ll) \
+ : "g" ((USItype) (u)), "g" ((USItype)(v))); \
+ (w1) = __x.__i.__h; (w0) = __x.__i.__l;})
+#endif /* __pyr__ */
+
+#if defined (__ibm032__) /* RT/ROMP */ && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("a %1,%5\n\tae %0,%3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((USItype)(ah)), "r" ((USItype)(bh)), \
+ "%1" ((USItype)(al)), "r" ((USItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("s %1,%5\n\tse %0,%3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((USItype)(ah)), "r" ((USItype)(bh)), \
+ "1" ((USItype)(al)), "r" ((USItype)(bl)))
+#define smul_ppmm(ph, pl, m0, m1) \
+ __asm__ ( \
+ "s r2,r2\n" \
+" mts r10,%2\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" m r2,%3\n" \
+" cas %0,r2,r0\n" \
+" mfs r10,%1" \
+ : "=r" (ph), "=r" (pl) \
+ : "%r" ((USItype)(m0)), "r" ((USItype)(m1)) \
+ : "r2")
+#define UMUL_TIME 20
+#define UDIV_TIME 200
+#define count_leading_zeros(count, x) \
+ do { \
+ if ((x) >= 0x10000) \
+ __asm__ ("clz %0,%1" \
+ : "=r" (count) : "r" ((USItype)(x) >> 16)); \
+ else \
+ { \
+ __asm__ ("clz %0,%1" \
+ : "=r" (count) : "r" ((USItype)(x))); \
+ (count) += 16; \
+ } \
+ } while (0)
+#endif /* RT/ROMP */
+
+#if defined (__sh2__) && W_TYPE_SIZE == 32
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("dmulu.l %2,%3\n\tsts macl,%1\n\tsts mach,%0" \
+ : "=r" (w1), "=r" (w0) : "r" (u), "r" (v) : "macl", "mach")
+#define UMUL_TIME 5
+#endif
+
+#if defined (__sparc__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("addcc %r4,%5,%1\n\taddx %r2,%3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rJ" (ah), "rI" (bh),"%rJ" (al), "rI" (bl) \
+ __CLOBBER_CC)
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("subcc %r4,%5,%1\n\tsubx %r2,%3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rJ" (ah), "rI" (bh), "rJ" (al), "rI" (bl) \
+ __CLOBBER_CC)
+/* FIXME: When gcc -mcpu=v9 is used on solaris, gcc/config/sol2-sld-64.h
+ doesn't define anything to indicate that to us, it only sets __sparcv8. */
+#if defined (__sparc_v9__) || defined (__sparcv9)
+/* Perhaps we should use floating-point operations here? */
+#if 0
+/* Triggers a bug making mpz/tests/t-gcd.c fail.
+ Perhaps we simply need explicitly zero-extend the inputs? */
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("mulx %2,%3,%%g1; srl %%g1,0,%1; srlx %%g1,32,%0" : \
+ "=r" (w1), "=r" (w0) : "r" (u), "r" (v) : "g1")
+#else
+/* Use v8 umul until above bug is fixed. */
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("umul %2,%3,%1;rd %%y,%0" : "=r" (w1), "=r" (w0) : "r" (u), "r" (v))
+#endif
+/* Use a plain v8 divide for v9. */
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ USItype __q; \
+ __asm__ ("mov %1,%%y;nop;nop;nop;udiv %2,%3,%0" \
+ : "=r" (__q) : "r" (n1), "r" (n0), "r" (d)); \
+ (r) = (n0) - __q * (d); \
+ (q) = __q; \
+ } while (0)
+#else
+#if defined (__sparc_v8__) /* gcc normal */ \
+ || defined (__sparcv8) /* gcc solaris */ \
+ || HAVE_HOST_CPU_supersparc
+/* Don't match immediate range because, 1) it is not often useful,
+ 2) the 'I' flag thinks of the range as a 13 bit signed interval,
+ while we want to match a 13 bit interval, sign extended to 32 bits,
+ but INTERPRETED AS UNSIGNED. */
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("umul %2,%3,%1;rd %%y,%0" : "=r" (w1), "=r" (w0) : "r" (u), "r" (v))
+#define UMUL_TIME 5
+
+#if HAVE_HOST_CPU_supersparc
+#define UDIV_TIME 60 /* SuperSPARC timing */
+#else
+/* Don't use this on SuperSPARC because its udiv only handles 53 bit
+ dividends and will trap to the kernel for the rest. */
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ USItype __q; \
+ __asm__ ("mov %1,%%y;nop;nop;nop;udiv %2,%3,%0" \
+ : "=r" (__q) : "r" (n1), "r" (n0), "r" (d)); \
+ (r) = (n0) - __q * (d); \
+ (q) = __q; \
+ } while (0)
+#define UDIV_TIME 25
+#endif /* HAVE_HOST_CPU_supersparc */
+
+#else /* ! __sparc_v8__ */
+#if defined (__sparclite__)
+/* This has hardware multiply but not divide. It also has two additional
+ instructions scan (ffs from high bit) and divscc. */
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("umul %2,%3,%1;rd %%y,%0" : "=r" (w1), "=r" (w0) : "r" (u), "r" (v))
+#define UMUL_TIME 5
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ __asm__ ("! Inlined udiv_qrnnd\n" \
+" wr %%g0,%2,%%y ! Not a delayed write for sparclite\n" \
+" tst %%g0\n" \
+" divscc %3,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%%g1\n" \
+" divscc %%g1,%4,%0\n" \
+" rd %%y,%1\n" \
+" bl,a 1f\n" \
+" add %1,%4,%1\n" \
+"1: ! End of inline udiv_qrnnd" \
+ : "=r" (q), "=r" (r) : "r" (n1), "r" (n0), "rI" (d) \
+ : "%g1" __AND_CLOBBER_CC)
+#define UDIV_TIME 37
+#define count_leading_zeros(count, x) \
+ __asm__ ("scan %1,1,%0" : "=r" (count) : "r" (x))
+/* Early sparclites return 63 for an argument of 0, but they warn that future
+ implementations might change this. Therefore, leave COUNT_LEADING_ZEROS_0
+ undefined. */
+#endif /* __sparclite__ */
+#endif /* __sparc_v8__ */
+#endif /* __sparc_v9__ */
+/* Default to sparc v7 versions of umul_ppmm and udiv_qrnnd. */
+#ifndef umul_ppmm
+#define umul_ppmm(w1, w0, u, v) \
+ __asm__ ("! Inlined umul_ppmm\n" \
+" wr %%g0,%2,%%y ! SPARC has 0-3 delay insn after a wr\n" \
+" sra %3,31,%%g2 ! Don't move this insn\n" \
+" and %2,%%g2,%%g2 ! Don't move this insn\n" \
+" andcc %%g0,0,%%g1 ! Don't move this insn\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,%3,%%g1\n" \
+" mulscc %%g1,0,%%g1\n" \
+" add %%g1,%%g2,%0\n" \
+" rd %%y,%1" \
+ : "=r" (w1), "=r" (w0) : "%rI" (u), "r" (v) \
+ : "%g1", "%g2" __AND_CLOBBER_CC)
+#define UMUL_TIME 39 /* 39 instructions */
+#endif
+#ifndef udiv_qrnnd
+#ifndef LONGLONG_STANDALONE
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { UWtype __r; \
+ (q) = __MPN(udiv_qrnnd) (&__r, (n1), (n0), (d)); \
+ (r) = __r; \
+ } while (0)
+extern UWtype __MPN(udiv_qrnnd) _PROTO ((UWtype *, UWtype, UWtype, UWtype));
+#ifndef UDIV_TIME
+#define UDIV_TIME 140
+#endif
+#endif /* LONGLONG_STANDALONE */
+#endif /* udiv_qrnnd */
+#endif /* __sparc__ */
+
+#if defined (__sparc__) && W_TYPE_SIZE == 64
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ( \
+ "addcc %r4,%5,%1\n" \
+ " addccc %r6,%7,%%g0\n" \
+ " addc %r2,%3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rJ" (ah), "rI" (bh), "%rJ" (al), "rI" (bl), \
+ "%rJ" ((al) >> 32), "rI" ((bl) >> 32) \
+ __CLOBBER_CC)
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ( \
+ "subcc %r4,%5,%1\n" \
+ " subccc %r6,%7,%%g0\n" \
+ " subc %r2,%3,%0" \
+ : "=r" (sh), "=&r" (sl) \
+ : "rJ" (ah), "rI" (bh), "rJ" (al), "rI" (bl), \
+ "rJ" ((al) >> 32), "rI" ((bl) >> 32) \
+ __CLOBBER_CC)
+#endif
+
+#if defined (__vax__) && W_TYPE_SIZE == 32
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("addl2 %5,%1\n\tadwc %3,%0" \
+ : "=g" (sh), "=&g" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "%1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("subl2 %5,%1\n\tsbwc %3,%0" \
+ : "=g" (sh), "=&g" (sl) \
+ : "0" ((USItype)(ah)), "g" ((USItype)(bh)), \
+ "1" ((USItype)(al)), "g" ((USItype)(bl)))
+#define smul_ppmm(xh, xl, m0, m1) \
+ do { \
+ union {UDItype __ll; \
+ struct {USItype __l, __h;} __i; \
+ } __x; \
+ USItype __m0 = (m0), __m1 = (m1); \
+ __asm__ ("emul %1,%2,$0,%0" \
+ : "=g" (__x.__ll) : "g" (__m0), "g" (__m1)); \
+ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \
+ } while (0)
+#define sdiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ union {DItype __ll; \
+ struct {SItype __l, __h;} __i; \
+ } __x; \
+ __x.__i.__h = n1; __x.__i.__l = n0; \
+ __asm__ ("ediv %3,%2,%0,%1" \
+ : "=g" (q), "=g" (r) : "g" (__x.__ll), "g" (d)); \
+ } while (0)
+#if 0
+/* FIXME: This instruction appears to be unimplemented on some systems (vax
+ 8800 maybe). */
+#define count_trailing_zeros(count,x) \
+ do { \
+ __asm__ ("ffs 0, 31, %1, %0" \
+ : "=g" (count) \
+ : "g" ((USItype) (x))); \
+ } while (0)
+#endif
+#endif /* __vax__ */
+
+#if defined (__z8000__) && W_TYPE_SIZE == 16
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ __asm__ ("add %H1,%H5\n\tadc %H0,%H3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((unsigned int)(ah)), "r" ((unsigned int)(bh)), \
+ "%1" ((unsigned int)(al)), "rQR" ((unsigned int)(bl)))
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ __asm__ ("sub %H1,%H5\n\tsbc %H0,%H3" \
+ : "=r" (sh), "=&r" (sl) \
+ : "0" ((unsigned int)(ah)), "r" ((unsigned int)(bh)), \
+ "1" ((unsigned int)(al)), "rQR" ((unsigned int)(bl)))
+#define umul_ppmm(xh, xl, m0, m1) \
+ do { \
+ union {long int __ll; \
+ struct {unsigned int __h, __l;} __i; \
+ } __x; \
+ unsigned int __m0 = (m0), __m1 = (m1); \
+ __asm__ ("mult %S0,%H3" \
+ : "=r" (__x.__i.__h), "=r" (__x.__i.__l) \
+ : "%1" (m0), "rQR" (m1)); \
+ (xh) = __x.__i.__h; (xl) = __x.__i.__l; \
+ (xh) += ((((signed int) __m0 >> 15) & __m1) \
+ + (((signed int) __m1 >> 15) & __m0)); \
+ } while (0)
+#endif /* __z8000__ */
+
+#endif /* __GNUC__ */
+
+#endif /* NO_ASM */
+
+
+#if !defined (umul_ppmm) && defined (__umulsidi3)
+#define umul_ppmm(ph, pl, m0, m1) \
+ { \
+ UDWtype __ll = __umulsidi3 (m0, m1); \
+ ph = (UWtype) (__ll >> W_TYPE_SIZE); \
+ pl = (UWtype) __ll; \
+ }
+#endif
+
+#if !defined (__umulsidi3)
+#define __umulsidi3(u, v) \
+ ({UWtype __hi, __lo; \
+ umul_ppmm (__hi, __lo, u, v); \
+ ((UDWtype) __hi << W_TYPE_SIZE) | __lo; })
+#endif
+
+
+/* Use mpn_umul_ppmm or mpn_udiv_qrnnd functions, if they exist. The "_r"
+ forms have "reversed" arguments, meaning the pointer is last, which
+ sometimes allows better parameter passing, in particular on 64-bit
+ hppa. */
+
+#define mpn_umul_ppmm __MPN(umul_ppmm)
+extern UWtype mpn_umul_ppmm _PROTO ((UWtype *, UWtype, UWtype));
+
+#if ! defined (umul_ppmm) && HAVE_NATIVE_mpn_umul_ppmm \
+ && ! defined (LONGLONG_STANDALONE)
+#define umul_ppmm(wh, wl, u, v) \
+ do { \
+ UWtype __umul_ppmm__p0; \
+ (wh) = mpn_umul_ppmm (&__umul_ppmm__p0, (UWtype) (u), (UWtype) (v)); \
+ (wl) = __umul_ppmm__p0; \
+ } while (0)
+#endif
+
+#define mpn_umul_ppmm_r __MPN(umul_ppmm_r)
+extern UWtype mpn_umul_ppmm_r _PROTO ((UWtype, UWtype, UWtype *));
+
+#if ! defined (umul_ppmm) && HAVE_NATIVE_mpn_umul_ppmm_r \
+ && ! defined (LONGLONG_STANDALONE)
+#define umul_ppmm(wh, wl, u, v) \
+ do { \
+ UWtype __umul_ppmm__p0; \
+ (wh) = mpn_umul_ppmm_r ((UWtype) (u), (UWtype) (v), &__umul_ppmm__p0); \
+ (wl) = __umul_ppmm__p0; \
+ } while (0)
+#endif
+
+#define mpn_udiv_qrnnd __MPN(udiv_qrnnd)
+extern UWtype mpn_udiv_qrnnd _PROTO ((UWtype *, UWtype, UWtype, UWtype));
+
+#if ! defined (udiv_qrnnd) && HAVE_NATIVE_mpn_udiv_qrnnd \
+ && ! defined (LONGLONG_STANDALONE)
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ UWtype __udiv_qrnnd__r; \
+ (q) = mpn_udiv_qrnnd (&__udiv_qrnnd__r, \
+ (UWtype) (n1), (UWtype) (n0), (UWtype) d); \
+ (r) = __udiv_qrnnd__r; \
+ } while (0)
+#endif
+
+#define mpn_udiv_qrnnd_r __MPN(udiv_qrnnd_r)
+extern UWtype mpn_udiv_qrnnd_r _PROTO ((UWtype, UWtype, UWtype, UWtype *));
+
+#if ! defined (udiv_qrnnd) && HAVE_NATIVE_mpn_udiv_qrnnd_r \
+ && ! defined (LONGLONG_STANDALONE)
+#define udiv_qrnnd(q, r, n1, n0, d) \
+ do { \
+ UWtype __udiv_qrnnd__r; \
+ (q) = mpn_udiv_qrnnd_r ((UWtype) (n1), (UWtype) (n0), (UWtype) d, \
+ &__udiv_qrnnd__r); \
+ (r) = __udiv_qrnnd__r; \
+ } while (0)
+#endif
+
+
+/* If this machine has no inline assembler, use C macros. */
+
+#if !defined (add_ssaaaa)
+#define add_ssaaaa(sh, sl, ah, al, bh, bl) \
+ do { \
+ UWtype __x; \
+ __x = (al) + (bl); \
+ (sh) = (ah) + (bh) + (__x < (al)); \
+ (sl) = __x; \
+ } while (0)
+#endif
+
+#if !defined (sub_ddmmss)
+#define sub_ddmmss(sh, sl, ah, al, bh, bl) \
+ do { \
+ UWtype __x; \
+ __x = (al) - (bl); \
+ (sh) = (ah) - (bh) - ((al) < (bl)); \
+ (sl) = __x; \
+ } while (0)
+#endif
+
+/* If we lack umul_ppmm but have smul_ppmm, define umul_ppmm in terms of
+ smul_ppmm. */
+#if !defined (umul_ppmm) && defined (smul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UWtype __w1; \
+ UWtype __xm0 = (u), __xm1 = (v); \
+ smul_ppmm (__w1, w0, __xm0, __xm1); \
+ (w1) = __w1 + (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1) \
+ + (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0); \
+ } while (0)
+#endif
+
+/* If we still don't have umul_ppmm, define it using plain C.
+
+ For reference, when this code is used for squaring (ie. u and v identical
+ expressions), gcc recognises __x1 and __x2 are the same and generates 3
+ multiplies, not 4. The subsequent additions could be optimized a bit,
+ but the only place GMP currently uses such a square is mpn_sqr_basecase,
+ and chips obliged to use this generic C umul will have plenty of worse
+ performance problems than a couple of extra instructions on the diagonal
+ of sqr_basecase. */
+
+#if !defined (umul_ppmm)
+#define umul_ppmm(w1, w0, u, v) \
+ do { \
+ UWtype __x0, __x1, __x2, __x3; \
+ UHWtype __ul, __vl, __uh, __vh; \
+ UWtype __u = (u), __v = (v); \
+ \
+ __ul = __ll_lowpart (__u); \
+ __uh = __ll_highpart (__u); \
+ __vl = __ll_lowpart (__v); \
+ __vh = __ll_highpart (__v); \
+ \
+ __x0 = (UWtype) __ul * __vl; \
+ __x1 = (UWtype) __ul * __vh; \
+ __x2 = (UWtype) __uh * __vl; \
+ __x3 = (UWtype) __uh * __vh; \
+ \
+ __x1 += __ll_highpart (__x0);/* this can't give carry */ \
+ __x1 += __x2; /* but this indeed can */ \
+ if (__x1 < __x2) /* did we get it? */ \
+ __x3 += __ll_B; /* yes, add it in the proper pos. */ \
+ \
+ (w1) = __x3 + __ll_highpart (__x1); \
+ (w0) = (__x1 << W_TYPE_SIZE/2) + __ll_lowpart (__x0); \
+ } while (0)
+#endif
+
+/* If we don't have smul_ppmm, define it using umul_ppmm (which surely will
+ exist in one form or another. */
+#if !defined (smul_ppmm)
+#define smul_ppmm(w1, w0, u, v) \
+ do { \
+ UWtype __w1; \
+ UWtype __xm0 = (u), __xm1 = (v); \
+ umul_ppmm (__w1, w0, __xm0, __xm1); \
+ (w1) = __w1 - (-(__xm0 >> (W_TYPE_SIZE - 1)) & __xm1) \
+ - (-(__xm1 >> (W_TYPE_SIZE - 1)) & __xm0); \
+ } while (0)
+#endif
+
+/* Define this unconditionally, so it can be used for debugging. */
+#define __udiv_qrnnd_c(q, r, n1, n0, d) \
+ do { \
+ UWtype __d1, __d0, __q1, __q0, __r1, __r0, __m; \
+ \
+ ASSERT ((d) != 0); \
+ ASSERT ((n1) < (d)); \
+ \
+ __d1 = __ll_highpart (d); \
+ __d0 = __ll_lowpart (d); \
+ \
+ __q1 = (n1) / __d1; \
+ __r1 = (n1) - __q1 * __d1; \
+ __m = __q1 * __d0; \
+ __r1 = __r1 * __ll_B | __ll_highpart (n0); \
+ if (__r1 < __m) \
+ { \
+ __q1--, __r1 += (d); \
+ if (__r1 >= (d)) /* i.e. we didn't get carry when adding to __r1 */\
+ if (__r1 < __m) \
+ __q1--, __r1 += (d); \
+ } \
+ __r1 -= __m; \
+ \
+ __q0 = __r1 / __d1; \
+ __r0 = __r1 - __q0 * __d1; \
+ __m = __q0 * __d0; \
+ __r0 = __r0 * __ll_B | __ll_lowpart (n0); \
+ if (__r0 < __m) \
+ { \
+ __q0--, __r0 += (d); \
+ if (__r0 >= (d)) \
+ if (__r0 < __m) \
+ __q0--, __r0 += (d); \
+ } \
+ __r0 -= __m; \
+ \
+ (q) = __q1 * __ll_B | __q0; \
+ (r) = __r0; \
+ } while (0)
+
+/* If the processor has no udiv_qrnnd but sdiv_qrnnd, go through
+ __udiv_w_sdiv (defined in libgcc or elsewhere). */
+#if !defined (udiv_qrnnd) && defined (sdiv_qrnnd)
+#define udiv_qrnnd(q, r, nh, nl, d) \
+ do { \
+ UWtype __r; \
+ (q) = __MPN(udiv_w_sdiv) (&__r, nh, nl, d); \
+ (r) = __r; \
+ } while (0)
+#endif
+
+/* If udiv_qrnnd was not defined for this processor, use __udiv_qrnnd_c. */
+#if !defined (udiv_qrnnd)
+#define UDIV_NEEDS_NORMALIZATION 1
+#define udiv_qrnnd __udiv_qrnnd_c
+#endif
+
+#if !defined (count_leading_zeros)
+#define count_leading_zeros(count, x) \
+ do { \
+ UWtype __xr = (x); \
+ UWtype __a; \
+ \
+ if (W_TYPE_SIZE == 32) \
+ { \
+ __a = __xr < ((UWtype) 1 << 2*__BITS4) \
+ ? (__xr < ((UWtype) 1 << __BITS4) ? 1 : __BITS4 + 1) \
+ : (__xr < ((UWtype) 1 << 3*__BITS4) ? 2*__BITS4 + 1 \
+ : 3*__BITS4 + 1); \
+ } \
+ else \
+ { \
+ for (__a = W_TYPE_SIZE - 8; __a > 0; __a -= 8) \
+ if (((__xr >> __a) & 0xff) != 0) \
+ break; \
+ ++__a; \
+ } \
+ \
+ (count) = W_TYPE_SIZE + 1 - __a - __clz_tab[__xr >> __a]; \
+ } while (0)
+/* This version gives a well-defined value for zero. */
+#define COUNT_LEADING_ZEROS_0 (W_TYPE_SIZE - 1)
+#define COUNT_LEADING_ZEROS_NEED_CLZ_TAB
+#endif
+
+/* clz_tab needed by mpn/x86/pentium/mod_1.asm in a fat binary */
+#if HAVE_HOST_CPU_FAMILY_x86 && WANT_FAT_BINARY
+#define COUNT_LEADING_ZEROS_NEED_CLZ_TAB
+#endif
+
+#ifdef COUNT_LEADING_ZEROS_NEED_CLZ_TAB
+extern const unsigned char __GMP_DECLSPEC __clz_tab[128];
+#endif
+
+#if !defined (count_trailing_zeros)
+/* Define count_trailing_zeros using count_leading_zeros. The latter might be
+ defined in asm, but if it is not, the C version above is good enough. */
+#define count_trailing_zeros(count, x) \
+ do { \
+ UWtype __ctz_x = (x); \
+ UWtype __ctz_c; \
+ ASSERT (__ctz_x != 0); \
+ count_leading_zeros (__ctz_c, __ctz_x & -__ctz_x); \
+ (count) = W_TYPE_SIZE - 1 - __ctz_c; \
+ } while (0)
+#endif
+
+#ifndef UDIV_NEEDS_NORMALIZATION
+#define UDIV_NEEDS_NORMALIZATION 0
+#endif
+
+/* Whether udiv_qrnnd is actually implemented with udiv_qrnnd_preinv, and
+ that hence the latter should always be used. */
+#ifndef UDIV_PREINV_ALWAYS
+#define UDIV_PREINV_ALWAYS 0
+#endif
+
+/* Give defaults for UMUL_TIME and UDIV_TIME. */
+#ifndef UMUL_TIME
+#define UMUL_TIME 1
+#endif
+
+#ifndef UDIV_TIME
+#define UDIV_TIME UMUL_TIME
+#endif
projects / msp430-gcc.git / blobdiff