+++ /dev/null
-# Makefile for GNU F77 compiler runtime.
-# Copyright (C) 1995-1998, 2001, 2002, 2003 Free Software Foundation, Inc.
-# Contributed by Dave Love (d.love@dl.ac.uk).
-#
-#This file is part of GNU Fortran.
-#
-#GNU Fortran is free software; you can redistribute it and/or modify
-#it under the terms of the GNU General Public License as published by
-#the Free Software Foundation; either version 2, or (at your option)
-#any later version.
-#
-#GNU Fortran is distributed in the hope that it will be useful,
-#but WITHOUT ANY WARRANTY; without even the implied warranty of
-#MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-#GNU General Public License for more details.
-#
-#You should have received a copy of the GNU General Public License
-#along with GNU Fortran; see the file COPYING. If not, write to
-#the Free Software Foundation, 59 Temple Place - Suite 330, Boston, MA
-#02111-1307, USA.
-
-SHELL = /bin/sh
-MAKEOVERRIDES=
-.NOEXPORTS:
-
-#### Start of system configuration section. ####
-
-srcdir = @glibcpp_srcdir@
-VPATH = @glibcpp_srcdir@
-prefix = @prefix@
-exec_prefix = @exec_prefix@
-target_alias = @target_alias@
-gcc_version = @gcc_version@
-gcc_version_trigger = @gcc_version_trigger@
-top_srcdir = @top_srcdir@
-toplevel_srcdir = @toplevel_srcdir@
-toolexecdir = @glibcpp_toolexecdir@
-glibcpp_toolexecdir = @glibcpp_toolexecdir@
-glibcpp_toolexeclibdir = @glibcpp_toolexeclibdir@
-
-top_builddir = .
-
-libdir = $(exec_prefix)/lib
-libsubdir = $(libdir)/gcc-lib/$(target_alias)/$(gcc_version)
-#
-# Versions should start at 0:0:0 - See libtool manual.
-VERSION_MAJOR=0
-VERSION_MINOR=0
-VERSION_SUB=0
-
-# Multilib support variables.
-MULTISRCTOP =
-MULTIBUILDTOP =
-MULTIDIRS =
-MULTISUBDIR =
-MULTIDO = true
-MULTICLEAN = true
-
-# Not configured per top-level version, since that doesn't get passed
-# Versions should start at 0:0:0 - See libtool manual.
-# down at configure time, but overrridden by the top-level install
-# target.
-INSTALL = @INSTALL@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_DATA = @INSTALL_DATA@
-
-LIBTOOL = @LIBTOOL@
-CC = @CC@
-CFLAGS = @CFLAGS@
-AR = @AR@
-RANLIB = @RANLIB@
-
-# List of variables to pass to sub-makes.
-# Quote this way so that it can be used to set shell variables too.
-FLAGS_TO_PASS= \
- CC='$(CC)' \
- LD='$(LD)' \
- LIBTOOL='$(LIBTOOL)' \
- CFLAGS='$(CFLAGS)' \
- CPPFLAGS='$(CPPFLAGS)' \
- DESTDIR='$(DESTDIR)' \
- AR='$(AR)' \
- RANLIB='$(RANLIB)' \
- prefix='$(prefix)' \
- exec_prefix='$(exec_prefix)' \
- libdir='$(libdir)' \
- libsubdir='$(libsubdir)' \
- tooldir='$(tooldir)'
-
-LIBG2C_BASE = libg2c
-LIBG2C = $(LIBG2C_BASE).la
-
-SUBDIRS = libI77 libF77 libU77
-
-F2CEXT = abort derf derfc ef1asc ef1cmc erf erfc exit getarg getenv iargc \
- signal system flush ftell fseek access besj0 besj1 besjn besy0 besy1 \
- besyn chdir chmod ctime dbesj0 dbesj1 dbesjn dbesy0 dbesy1 dbesyn \
- dtime etime fdate fgetc fget flush1 fnum fputc fput fstat gerror \
- getcwd getgid getlog getpid getuid gmtime hostnm idate ierrno irand \
- isatty itime kill link lnblnk lstat ltime mclock perror rand rename \
- secnds second sleep srand stat symlnk time ttynam umask unlink \
- vxttim alarm \
- date_y2kbuggy date_y2kbug vxtidt_y2kbuggy vxtidt_y2kbug
-
-.SUFFIXES:
-
-# The logic here is partly dictated by the desire to keep the lib?77
-# subdirs for compatibility with the Netlib version and because libU77
-# has a different copyright; then the libe77 bit (EXTERNALly-callable
-# versions) is funny. Given that, as well as keeping things as simple
-# as possible we want (at least) the following:
-# * Allow make to be run at the top level (all-target-libf2c), at this
-# level, or the subdirs of this level. In the latter case we only
-# compile, rather than updating libg2c.a;
-# * A robust set of dependencies, so that we rebuild (as little as
-# possible) if a configuration file, g2c.h or any lib?77/*.c file
-# changes;
-# * Avoid unnecessary running of ar and ranlib;
-# * Expose parallelism where reasonable, but not as a priority.
-
-# The intended top-level target here does a non-multilib build (via
-# the dependency) and then (perhaps) builds multilibs.
-
-all: all-unilib
- : $(MAKE) ; exec $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="all-unilib"
-
-# `all-unilib' is the overall target in the absence of multilibs,
-# meant to be invoked via multi-do for multilibs.
-
-# Its dependencies can be satisfied in parallel. The [fiu]77 targets
-# update stamp files (object file lists, actually, see the subdir
-# makefiles) on which the $(LIBG2C) depends. The stamp files
-# s-lib[fiu]77 are intentionally not targets, since we're only meant
-# to come in at the level of this target. The [fiu]77 targets always
-# invoke sub makes to check dependencies in the subdirs, else we'd
-# have to maintain them at this level; we live with the overhead of
-# some recursive makes which may do nothing.
-
-all-unilib: i77 f77 u77 s-libe77
- $(MAKE) $(FLAGS_TO_PASS) $(LIBG2C)
-
-i77 f77 u77: g2c.h
-
-# This target should normally only get invoked via `all-unilib' --
-# after all's well in the subdirs -- actually to assemble the library.
-# The stamp files contain the object lists of each component of the
-# library. The point of breaking them up is to avoid command-line
-# length limitations.
-
-$(LIBG2C): s-libi77 s-libf77 s-libu77 s-libe77
- $(LIBTOOL) --mode=link $(CC) -o $@ \
- -version-info $(VERSION_MAJOR):$(VERSION_MINOR):$(VERSION_SUB) \
- -rpath $(glibcpp_toolexeclibdir) \
- -objectlist s-libe77 \
- -objectlist s-libf77 \
- -objectlist s-libi77 \
- -objectlist s-libu77 \
- -lm
-
-i77:
- cd libI77; $(MAKE) $(FLAGS_TO_PASS) all
-
-f77:
- cd libF77; $(MAKE) $(FLAGS_TO_PASS) all
-
-u77:
- cd libU77; $(MAKE) $(FLAGS_TO_PASS) all
-
-s-libe77: f2cext.c
- if [ -d libE77 ]; then rm -f libE77/*.o libE77/*.lo; else mkdir libE77; fi
- -rm -f $@.T $@
- for name in $(F2CEXT); \
- do \
- echo $${name}; \
- $(LIBTOOL) --mode=compile $(CC) -c -I. -I$(srcdir) -I../../include \
- $(CPPFLAGS) $(CFLAGS) -DL$${name} $(srcdir)/f2cext.c \
- -o libE77/L$${name}.lo ; \
- if [ $$? -eq 0 ] ; then true; else exit 1; fi; \
- echo libE77/L$${name}.lo >> $@.T; \
- done
- mv $@.T $@
-
-f2cext.c: g2c.h
-
-${srcdir}/configure: configure.in
- rm -f config.cache
- cd $(srcdir) && autoconf
-
-# Dependence on Makefile serializes for parallel make.
-g2c.h: g2c.hin config.status Makefile
-# Might try to avoid rebuilding everything if Makefile or configure
-# changes and g2c.h doesn't; see also the Makefile rule. Should
-# depend on another stamp file rather than using the commented-out
-# lines below, since g2c.h isn't necessarily brought up to date.
-# mv g2c.h g2c.x
- $(SHELL) config.status
-# $(SHELL) $(srcdir)/../move-if-change g2c.h g2c.x && mv g2c.x g2c.h
-
-Makefile: Makefile.in config.status
-# Autoconf doc uses `./config.status'. Is there a good reason to use $(SHELL)?
- $(SHELL) config.status
-
-config.status: configure $(gcc_version_trigger)
-# Make sure we don't pick up a site config file and that configure
-# gets run with correct values of variables such as CC.
- CONFIG_SITE=no-such-file $(FLAGS_TO_PASS) \
- $(SHELL) config.status --recheck
-
-info install-info clean-info dvi TAGS dist installcheck installdirs:
-
-check:
- cd libU77; $(MAKE) G77DIR=../../../gcc/ check
-
-install: all
- $(SHELL) $(toplevel_srcdir)/mkinstalldirs $(DESTDIR)$(glibcpp_toolexeclibdir)
- $(LIBTOOL) --mode=install $(INSTALL) $(LIBG2C) $(DESTDIR)$(glibcpp_toolexeclibdir)
- $(INSTALL_DATA) libfrtbegin.a $(DESTDIR)$(glibcpp_toolexeclibdir)
- $(RANLIB) $(DESTDIR)$(glibcpp_toolexeclibdir)/libfrtbegin.a
- $(INSTALL_DATA) g2c.h $(DESTDIR)$(libsubdir)/include/g2c.h
- $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
- @-$(LIBTOOL) --mode=finish $(DESTDIR)$(glibcpp_toolexeclibdir)
-
-install-strip:
- $(MAKE) INSTALL_PROGRAM='$(INSTALL_PROGRAM) -s' install
-
-uninstall:
- rm -f $(DESTDIR)$(libsubdir)/include/g2c.h
- rm -f $(DESTDIR)$(glibcpp_toolexeclibdir)/libfrtbegin.a
- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(glibcpp_toolexeclibdir)$(LIBG2C_BASE).la
- $(MULTIDO) $(FLAGS_TO_PASS) multi-do DO="$@"
-
-mostlyclean:
- rm -f $(LIBG2C) objlist
- $(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
- $(MULTICLEAN) multi-clean DO=$@
- rm -fr libE77 s-libe77
-
-clean: mostlyclean
- rm -f config.log
- $(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
- $(MULTICLEAN) multi-clean DO=$@
- rm -rf .libs
-
-distclean: clean
- rm -f g2c.h s-libe77
- $(MAKE) DO=$@ DODIRS="$(SUBDIRS)" $(FLAGS_TO_PASS) subdir_do; \
- $(MULTICLEAN) multi-clean DO=distclean
- rm -f config.cache config.status Makefile
-
-maintainer-clean:
-
-rebuilt: configure
-
-.PHONY: rebuilt mostlyclean clean distclean maintainer-clean all \
- i77 f77 u77 check uninstall install-strip dist \
- installcheck installdirs all-unilib
-
-subdir_do:
- @rootpre=`pwd`/; export rootpre; \
- srcrootpre=`cd $(srcdir); pwd`/; export srcrootpre; \
- for i in .. $(DODIRS); do \
- if [ x$$i != x.. ]; then \
- if [ -f ./$$i/Makefile ]; then \
- if (cd ./$$i; $(MAKE) $(FLAGS_TO_PASS) $(DO)); then \
- true; \
- else \
- exit 1; \
- fi; \
- else true; fi; \
- else true; fi; \
- done
-
-# multidoings may be added here by configure.
projects / msp430-gcc.git / blobdiff