+++ /dev/null
-dnl aclocal.m4 generated automatically by aclocal 1.4
-
-dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc.
-dnl This file is free software; the Free Software Foundation
-dnl gives unlimited permission to copy and/or distribute it,
-dnl with or without modifications, as long as this notice is preserved.
-
-dnl This program is distributed in the hope that it will be useful,
-dnl but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-dnl even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-dnl PARTICULAR PURPOSE.
-
-
-# serial 45 AC_PROG_LIBTOOL
-AC_DEFUN(AC_PROG_LIBTOOL,[AC_REQUIRE([_AC_PROG_LIBTOOL])
-dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX
-dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX.
- AC_PROVIDE_IFELSE([AC_PROG_CXX],
- [AC_LIBTOOL_CXX],
- [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX
-])])
-
-dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly.
-dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run
-dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both.
- AC_PROVIDE_IFELSE([AC_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],
- [AC_LIBTOOL_GCJ],
- [ifdef([AC_PROG_GCJ],
- [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])
- ifdef([A][M_PROG_GCJ],
- [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ
-])])])])])
-
-AC_DEFUN(_AC_PROG_LIBTOOL,
-[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl
-AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl
-
-# Save cache, so that ltconfig can load it
-AC_CACHE_SAVE
-
-# Actually configure libtool. ac_aux_dir is where install-sh is found.
-AR="$AR" LTCC="$CC" CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC="$MAGIC" LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \
-$libtool_flags --no-verify --build="$build" $ac_aux_dir/ltmain.sh $host \
-|| AC_MSG_ERROR([libtool configure failed])
-
-# Reload cache, that may have been modified by ltconfig
-AC_CACHE_LOAD
-
-# This can be used to rebuild libtool when needed
-LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh $ac_aux_dir/ltcf-c.sh"
-
-# Always use our own libtool.
-LIBTOOL='$(SHELL) $(top_builddir)/libtool'
-AC_SUBST(LIBTOOL)dnl
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-AC_DEFUN(AC_LIBTOOL_SETUP,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_ENABLE_SHARED])dnl
-AC_REQUIRE([AC_ENABLE_STATIC])dnl
-AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_PROG_LD])dnl
-AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-AC_REQUIRE([AC_PROG_LN_S])dnl
-AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl
-# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers!
-AC_REQUIRE([AC_OBJEXT])dnl
-AC_REQUIRE([AC_EXEEXT])dnl
-dnl
-
-# Only perform the check for file, if the check method requires it
-case "$deplibs_check_method" in
-file_magic*)
- if test "$file_magic_cmd" = '${MAGIC}'; then
- AC_PATH_MAGIC
- fi
- ;;
-esac
-
-AC_CHECK_TOOL(RANLIB, ranlib, :)
-AC_CHECK_TOOL(STRIP, strip, :)
-
-# Check for any special flags to pass to ltconfig.
-libtool_flags="--cache-file=$cache_file"
-test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared"
-test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static"
-test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install"
-test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc"
-test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld"
-ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN],
-[libtool_flags="$libtool_flags --enable-dlopen"])
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[libtool_flags="$libtool_flags --enable-win32-dll"])
-AC_ARG_ENABLE(libtool-lock,
- [ --disable-libtool-lock avoid locking (might break parallel builds)])
-test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock"
-test x"$silent" = xyes && libtool_flags="$libtool_flags --silent"
-
-AC_ARG_WITH(pic,
- [ --with-pic try to use only PIC/non-PIC objects [default=use both]],
- pic_mode="$withval", pic_mode=default)
-test x"$pic_mode" = xyes && libtool_flags="$libtool_flags --prefer-pic"
-test x"$pic_mode" = xno && libtool_flags="$libtool_flags --prefer-non-pic"
-
-# Some flags need to be propagated to the compiler or linker for good
-# libtool support.
-case "$host" in
-*-*-irix6*)
- # Find out which ABI we are using.
- echo '[#]line __oline__ "configure"' > conftest.$ac_ext
- if AC_TRY_EVAL(ac_compile); then
- case "`/usr/bin/file conftest.o`" in
- *32-bit*)
- LD="${LD-ld} -32"
- ;;
- *N32*)
- LD="${LD-ld} -n32"
- ;;
- *64-bit*)
- LD="${LD-ld} -64"
- ;;
- esac
- fi
- rm -rf conftest*
- ;;
-
-*-*-sco3.2v5*)
- # On SCO OpenServer 5, we need -belf to get full-featured binaries.
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -belf"
- AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf,
- [AC_LANG_SAVE
- AC_LANG_C
- AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])
- AC_LANG_RESTORE])
- if test x"$lt_cv_cc_needs_belf" != x"yes"; then
- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf
- CFLAGS="$SAVE_CFLAGS"
- fi
- ;;
-
-ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL],
-[*-*-cygwin* | *-*-mingw*)
- AC_CHECK_TOOL(DLLTOOL, dlltool, false)
- AC_CHECK_TOOL(AS, as, false)
- AC_CHECK_TOOL(OBJDUMP, objdump, false)
-
- # recent cygwin and mingw systems supply a stub DllMain which the user
- # can override, but on older systems we have to supply one
- AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain,
- [AC_TRY_LINK([],
- [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*);
- DllMain (0, 0, 0);],
- [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])])
-
- case "$host/$CC" in
- *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*)
- # old mingw systems require "-dll" to link a DLL, while more recent ones
- # require "-mdll"
- SAVE_CFLAGS="$CFLAGS"
- CFLAGS="$CFLAGS -mdll"
- AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch,
- [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])])
- CFLAGS="$SAVE_CFLAGS" ;;
- *-*-cygwin*)
- # cygwin systems need to pass --dll to the linker, and not link
- # crt.o which will require a WinMain@16 definition.
- lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;;
- esac
- ;;
- ])
-esac
-])
-
-# AC_LIBTOOL_DLOPEN - enable checks for dlopen support
-AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])])
-
-# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's
-AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])])
-
-# AC_ENABLE_SHARED - implement the --enable-shared flag
-# Usage: AC_ENABLE_SHARED[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_SHARED, [dnl
-define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(shared,
-changequote(<<, >>)dnl
-<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_shared=yes ;;
-no) enable_shared=no ;;
-*)
- enable_shared=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_shared=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl
-])
-
-# AC_DISABLE_SHARED - set the default shared flag to --disable-shared
-AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_SHARED(no)])
-
-# AC_ENABLE_STATIC - implement the --enable-static flag
-# Usage: AC_ENABLE_STATIC[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_STATIC, [dnl
-define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(static,
-changequote(<<, >>)dnl
-<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_static=yes ;;
-no) enable_static=no ;;
-*)
- enable_static=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_static=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_static=AC_ENABLE_STATIC_DEFAULT)dnl
-])
-
-# AC_DISABLE_STATIC - set the default static flag to --disable-static
-AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_STATIC(no)])
-
-
-# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag
-# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)]
-# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to
-# `yes'.
-AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl
-define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl
-AC_ARG_ENABLE(fast-install,
-changequote(<<, >>)dnl
-<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT],
-changequote([, ])dnl
-[p=${PACKAGE-default}
-case "$enableval" in
-yes) enable_fast_install=yes ;;
-no) enable_fast_install=no ;;
-*)
- enable_fast_install=no
- # Look at the argument we got. We use all the common list separators.
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:,"
- for pkg in $enableval; do
- if test "X$pkg" = "X$p"; then
- enable_fast_install=yes
- fi
- done
- IFS="$ac_save_ifs"
- ;;
-esac],
-enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl
-])
-
-# AC_DISABLE_FAST_INSTALL - set the default to --disable-fast-install
-AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-AC_ENABLE_FAST_INSTALL(no)])
-
-# AC_LIBTOOL_PICMODE - implement the --with-pic flag
-# Usage: AC_LIBTOOL_PICMODE[(MODE)]
-# Where MODE is either `yes' or `no'. If omitted, it defaults to
-# `both'.
-AC_DEFUN(AC_LIBTOOL_PICMODE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
-pic_mode=ifelse($#,1,$1,default)])
-
-
-# AC_PATH_TOOL_PREFIX - find a file program which can recognise shared library
-AC_DEFUN(AC_PATH_TOOL_PREFIX,
-[AC_MSG_CHECKING([for $1])
-AC_CACHE_VAL(lt_cv_path_MAGIC,
-[case "$MAGIC" in
- /*)
- lt_cv_path_MAGIC="$MAGIC" # Let the user override the test with a path.
- ;;
- ?:/*)
- ac_cv_path_MAGIC="$MAGIC" # Let the user override the test with a dos path.
- ;;
- *)
- ac_save_MAGIC="$MAGIC"
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":"
-dnl $ac_dummy forces splitting on constant user-supplied paths.
-dnl POSIX.2 word splitting is done only on the output of word expansions,
-dnl not every word. This closes a longstanding sh security hole.
- ac_dummy="ifelse([$2], , $PATH, [$2])"
- for ac_dir in $ac_dummy; do
- test -z "$ac_dir" && ac_dir=.
- if test -f $ac_dir/$1; then
- lt_cv_path_MAGIC="$ac_dir/$1"
- if test -n "$file_magic_test_file"; then
- case "$deplibs_check_method" in
- "file_magic "*)
- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`"
- MAGIC="$lt_cv_path_MAGIC"
- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null |
- egrep "$file_magic_regex" > /dev/null; then
- :
- else
- cat <<EOF 1>&2
-
-*** Warning: the command libtool uses to detect shared libraries,
-*** $file_magic_cmd, produces output that libtool cannot recognize.
-*** The result is that libtool may fail to recognize shared libraries
-*** as such. This will affect the creation of libtool libraries that
-*** depend on shared libraries, but programs linked with such libtool
-*** libraries will work regardless of this problem. Nevertheless, you
-*** may want to report the problem to your system manager and/or to
-*** bug-libtool@gnu.org
-
-EOF
- fi ;;
- esac
- fi
- break
- fi
- done
- IFS="$ac_save_ifs"
- MAGIC="$ac_save_MAGIC"
- ;;
-esac])
-MAGIC="$lt_cv_path_MAGIC"
-if test -n "$MAGIC"; then
- AC_MSG_RESULT($MAGIC)
-else
- AC_MSG_RESULT(no)
-fi
-])
-
-
-# AC_PATH_MAGIC - find a file program which can recognise a shared library
-AC_DEFUN(AC_PATH_MAGIC,
-[AC_REQUIRE([AC_CHECK_TOOL_PREFIX])dnl
-AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin:$PATH)
-if test -z "$lt_cv_path_MAGIC"; then
- if test -n "$ac_tool_prefix"; then
- AC_PATH_TOOL_PREFIX(file, /usr/bin:$PATH)
- else
- MAGIC=:
- fi
-fi
-])
-
-
-# AC_PROG_LD - find the path to the GNU or non-GNU linker
-AC_DEFUN(AC_PROG_LD,
-[AC_ARG_WITH(gnu-ld,
-[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]],
-test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no)
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_CANONICAL_BUILD])dnl
-ac_prog=ld
-if test "$ac_cv_prog_gcc" = yes; then
- # Check if gcc -print-prog-name=ld gives a path.
- AC_MSG_CHECKING([for ld used by GCC])
- case $host in
- *-*-mingw*)
- # gcc leaves a trailing carriage return which upsets mingw
- ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;;
- *)
- ac_prog=`($CC -print-prog-name=ld) 2>&5` ;;
- esac
- case "$ac_prog" in
- # Accept absolute paths.
-changequote(,)dnl
- [\\/]* | [A-Za-z]:[\\/]*)
- re_direlt='/[^/][^/]*/\.\./'
-changequote([,])dnl
- # Canonicalize the path of ld
- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'`
- while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do
- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"`
- done
- test -z "$LD" && LD="$ac_prog"
- ;;
- "")
- # If it fails, then pretend we aren't using GCC.
- ac_prog=ld
- ;;
- *)
- # If it is relative, then search for the first ld in PATH.
- with_gnu_ld=unknown
- ;;
- esac
-elif test "$with_gnu_ld" = yes; then
- AC_MSG_CHECKING([for GNU ld])
-else
- AC_MSG_CHECKING([for non-GNU ld])
-fi
-AC_CACHE_VAL(ac_cv_path_LD,
-[if test -z "$LD"; then
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH; do
- test -z "$ac_dir" && ac_dir=.
- if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then
- ac_cv_path_LD="$ac_dir/$ac_prog"
- # Check to see if the program is GNU ld. I'd rather use --version,
- # but apparently some GNU ld's only accept -v.
- # Break only if it was the GNU/non-GNU ld that we prefer.
- if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then
- test "$with_gnu_ld" != no && break
- else
- test "$with_gnu_ld" != yes && break
- fi
- fi
- done
- IFS="$ac_save_ifs"
-else
- ac_cv_path_LD="$LD" # Let the user override the test with a path.
-fi])
-LD="$ac_cv_path_LD"
-if test -n "$LD"; then
- AC_MSG_RESULT($LD)
-else
- AC_MSG_RESULT(no)
-fi
-test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH])
-AC_PROG_LD_GNU
-])
-
-AC_DEFUN(AC_PROG_LD_GNU,
-[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld,
-[# I'd rather use --version here, but apparently some GNU ld's only accept -v.
-if $LD -v 2>&1 </dev/null | egrep '(GNU|with BFD)' 1>&5; then
- ac_cv_prog_gnu_ld=yes
-else
- ac_cv_prog_gnu_ld=no
-fi])
-with_gnu_ld=$ac_cv_prog_gnu_ld
-])
-
-# AC_PROG_LD_RELOAD_FLAG - find reload flag for linker
-# -- PORTME Some linkers may need a different reload flag.
-AC_DEFUN(AC_PROG_LD_RELOAD_FLAG,
-[AC_CACHE_CHECK([for $LD option to reload object files], lt_cv_ld_reload_flag,
-[lt_cv_ld_reload_flag='-r'])
-reload_flag=$lt_cv_ld_reload_flag
-test -n "$reload_flag" && reload_flag=" $reload_flag"
-])
-
-# AC_DEPLIBS_CHECK_METHOD - how to check for library dependencies
-# -- PORTME fill in with the dynamic library characteristics
-AC_DEFUN(AC_DEPLIBS_CHECK_METHOD,
-[AC_CACHE_CHECK([how to recognise dependant libraries],
-lt_cv_deplibs_check_method,
-[lt_cv_file_magic_cmd='${MAGIC}'
-lt_cv_file_magic_test_file=
-lt_cv_deplibs_check_method='unknown'
-# Need to set the preceding variable on all platforms that support
-# interlibrary dependencies.
-# 'none' -- dependencies not supported.
-# `unknown' -- same as none, but documents that we really don't know.
-# 'pass_all' -- all dependencies passed with no checks.
-# 'test_compile' -- check by making test program.
-# 'file_magic [regex]' -- check by looking for files in library path
-# which responds to the $file_magic_cmd with a given egrep regex.
-# If you have `file' or equivalent on your system and you're not sure
-# whether `pass_all' will *always* work, you probably want this one.
-
-case "$host_os" in
-aix4*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-beos*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-bsdi4*)
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'
- changequote([, ])dnl
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=/shlib/libc.so
- ;;
-
-cygwin* | mingw*)
- lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?'
- lt_cv_file_magic_cmd='${OBJDUMP} -f'
- ;;
-
-freebsd* )
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then
- case "$host_cpu" in
- i*86 )
- # Not sure whether the presence of OpenBSD here was a mistake.
- # Let's accept both of them until this is cleared up.
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'
- changequote([, ])dnl
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*`
- ;;
- esac
- else
- lt_cv_deplibs_check_method=pass_all
- fi
- ;;
-
-gnu*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-hpux10.20*)
- # TODO: Does this work for hpux-11 too?
- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'
- lt_cv_file_magic_cmd=/usr/bin/file
- lt_cv_file_magic_test_file=/usr/lib/libc.sl
- ;;
-
-irix5* | irix6*)
- case "$host_os" in
- irix5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1"
- ;;
- *)
- case "$LD" in
- *-32|*"-32 ") libmagic=32-bit;;
- *-n32|*"-n32 ") libmagic=N32;;
- *-64|*"-64 ") libmagic=64-bit;;
- *) libmagic=never-match;;
- esac
- # this will be overridden with pass_all, but let us keep it just in case
- changequote(,)dnl
- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"
- changequote([, ])dnl
- ;;
- esac
- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*`
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-# This must be Linux ELF.
-linux-gnu*)
- case "$host_cpu" in
- alpha* | i*86 | powerpc* | sparc* | ia64* )
- lt_cv_deplibs_check_method=pass_all ;;
- *)
- # glibc up to 2.1.1 does not perform some relocations on ARM
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;
- changequote([, ])dnl
- esac
- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so`
- ;;
-
-netbsd*)
- if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then :
- else
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object'
- changequote([, ])dnl
- lt_cv_file_magic_cmd='/usr/bin/file -L'
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- fi
- ;;
-
-osf3* | osf4* | osf5*)
- # this will be overridden with pass_all, but let us keep it just in case
- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library'
- lt_cv_file_magic_test_file=/shlib/libc.so
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-sco3.2v5*)
- lt_cv_deplibs_check_method=pass_all
- ;;
-
-solaris*)
- lt_cv_deplibs_check_method=pass_all
- lt_cv_file_magic_test_file=/lib/libc.so
- ;;
-
-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*)
- case "$host_vendor" in
- ncr)
- lt_cv_deplibs_check_method=pass_all
- ;;
- motorola)
- changequote(,)dnl
- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'
- changequote([, ])dnl
- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*`
- ;;
- esac
- ;;
-esac
-])
-file_magic_cmd=$lt_cv_file_magic_cmd
-deplibs_check_method=$lt_cv_deplibs_check_method
-])
-
-
-# AC_PROG_NM - find the path to a BSD-compatible name lister
-AC_DEFUN(AC_PROG_NM,
-[AC_MSG_CHECKING([for BSD-compatible nm])
-AC_CACHE_VAL(ac_cv_path_NM,
-[if test -n "$NM"; then
- # Let the user override the test.
- ac_cv_path_NM="$NM"
-else
- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}"
- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do
- test -z "$ac_dir" && ac_dir=.
- tmp_nm=$ac_dir/${ac_tool_prefix}nm
- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then
- # Check to see if the nm accepts a BSD-compat flag.
- # Adding the `sed 1q' prevents false positives on HP-UX, which says:
- # nm: unknown option "B" ignored
- # Tru64's nm complains that /dev/null is an invalid object file
- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then
- ac_cv_path_NM="$tmp_nm -B"
- break
- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then
- ac_cv_path_NM="$tmp_nm -p"
- break
- else
- ac_cv_path_NM=${ac_cv_path_NM="$tmp_nm"} # keep the first match, but
- continue # so that we can try to find one that supports BSD flags
- fi
- fi
- done
- IFS="$ac_save_ifs"
- test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm
-fi])
-NM="$ac_cv_path_NM"
-AC_MSG_RESULT([$NM])
-])
-
-# AC_CHECK_LIBM - check for math library
-AC_DEFUN(AC_CHECK_LIBM,
-[AC_REQUIRE([AC_CANONICAL_HOST])dnl
-LIBM=
-case "$host" in
-*-*-beos* | *-*-cygwin*)
- # These system don't have libm
- ;;
-*-ncr-sysv4.3*)
- AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw")
- AC_CHECK_LIB(m, main, LIBM="$LIBM -lm")
- ;;
-*)
- AC_CHECK_LIB(m, main, LIBM="-lm")
- ;;
-esac
-])
-
-# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl convenience library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-convenience to the
-# configure arguments. Note that LIBLTDL and INCLTDL are not
-# AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If DIR is not
-# provided, it is assumed to be `libltdl'. LIBLTDL will be prefixed
-# with '${top_builddir}/' and INCLTDL will be prefixed with
-# '${top_srcdir}/' (note the single quotes!). If your package is not
-# flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- case "$enable_ltdl_convenience" in
- no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;;
- "") enable_ltdl_convenience=yes
- ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;;
- esac
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
-])
-
-# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for
-# the libltdl installable library and INCLTDL to the include flags for
-# the libltdl header and adds --enable-ltdl-install to the configure
-# arguments. Note that LIBLTDL and INCLTDL are not AC_SUBSTed, nor is
-# AC_CONFIG_SUBDIRS called. If DIR is not provided and an installed
-# libltdl is not found, it is assumed to be `libltdl'. LIBLTDL will
-# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed
-# with '${top_srcdir}/' (note the single quotes!). If your package is
-# not flat and you're not using automake, define top_builddir and
-# top_srcdir appropriately in the Makefiles.
-# In the future, this macro may have to be called after AC_PROG_LIBTOOL.
-AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl
- AC_CHECK_LIB(ltdl, main,
- [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no],
- [if test x"$enable_ltdl_install" = xno; then
- AC_MSG_WARN([libltdl not installed, but installation disabled])
- else
- enable_ltdl_install=yes
- fi
- ])
- if test x"$enable_ltdl_install" = x"yes"; then
- ac_configure_args="$ac_configure_args --enable-ltdl-install"
- LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la
- INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl'])
- else
- ac_configure_args="$ac_configure_args --enable-ltdl-install=no"
- LIBLTDL="-lltdl"
- INCLTDL=
- fi
-])
-
-# If this macro is not defined by Autoconf, define it here.
-ifdef([AC_PROVIDE_IFELSE],
- [],
- [define([AC_PROVIDE_IFELSE],
- [ifdef([AC_PROVIDE_$1],
- [$2], [$3])])])
-
-# AC_LIBTOOL_CXX - enable support for C++ libraries
-AC_DEFUN(AC_LIBTOOL_CXX,[AC_REQUIRE([_AC_LIBTOOL_CXX])])
-AC_DEFUN(_AC_LIBTOOL_CXX,
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_REQUIRE([AC_PROG_CXX])
-AC_REQUIRE([AC_PROG_CXXCPP])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-cxx.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$CXX" CXX="$CXX" CFLAGS="$CXXFLAGS" CPPFLAGS="$CPPFLAGS" \
-MAGIC="$MAGIC" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=CXX $ac_aux_dir/ltcf-cxx.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-# AC_LIBTOOL_GCJ - enable support for GCJ libraries
-AC_DEFUN(AC_LIBTOOL_GCJ,[AC_REQUIRE([_AC_LIBTOOL_GCJ])])
-AC_DEFUN(_AC_LIBTOOL_GCJ,
-[AC_REQUIRE([AC_PROG_LIBTOOL])
-AC_PROVIDE_IFELSE([AC_PROG_GCJ],[],
- [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[],
- [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])],
- [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])],
- [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])
-LIBTOOL_DEPS=$LIBTOOL_DEPS" $ac_aux_dir/ltcf-gcj.sh"
-lt_save_CC="$CC"
-lt_save_CFLAGS="$CFLAGS"
-dnl Make sure LTCC is set to the C compiler, i.e. set LTCC before CC
-dnl is set to the C++ compiler.
-AR="$AR" LTCC="$CC" CC="$GCJ" CFLAGS="$GCJFLAGS" CPPFLAGS="" \
-MAGIC="$MAGIC" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \
-LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" STRIP="$STRIP" \
-AS="$AS" DLLTOOL="$DLLTOOL" OBJDUMP="$OBJDUMP" \
-objext="$OBJEXT" exeext="$EXEEXT" reload_flag="$reload_flag" \
-deplibs_check_method="$deplibs_check_method" \
-file_magic_cmd="$file_magic_cmd" \
-${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig -o libtool $libtool_flags \
---build="$build" --add-tag=GCJ $ac_aux_dir/ltcf-gcj.sh $host \
-|| AC_MSG_ERROR([libtool tag configuration failed])
-CC="$lt_save_CC"
-CFLAGS="$lt_save_CFLAGS"
-
-# Redirect the config.log output again, so that the ltconfig log is not
-# clobbered by the next message.
-exec 5>>./config.log
-])
-
-dnl old names
-AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl
-AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl
-AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl
-AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl
-AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl
-
-dnl This is just to silence aclocal about the macro not being used
-ifelse([AC_DISABLE_FAST_INSTALL])dnl
-
-AC_DEFUN([LT_AC_PROG_GCJ],[
- AC_CHECK_TOOL(GCJ, gcj, no)
- test "x${GCJFLAGS+set}" = xset || GCJFLAGS="-g -O2"
- AC_SUBST(GCJFLAGS)
-])
-
-# serial 1 AC_LIB_LTDL
-
-AC_DEFUN(AC_LIB_LTDL,
-[AC_PREREQ(2.13)dnl
-AC_REQUIRE([AC_PROG_CC])dnl
-AC_REQUIRE([AC_C_CONST])dnl
-AC_REQUIRE([AC_C_INLINE])dnl
-
-dnl AC_LIB_LTDL must perform all the checks necessary for compilation
-dnl of the ltdl objects -- including compiler checks (above) and header
-dnl checks (below).
-AC_REQUIRE([AC_HEADER_STDC])dnl
-
-AC_CHECK_HEADERS(malloc.h memory.h stdlib.h stdio.h ctype.h dlfcn.h dl.h dld.h)
-AC_CHECK_HEADERS(string.h strings.h, break)
-AC_CHECK_FUNCS(strchr index, break)
-AC_CHECK_FUNCS(strrchr rindex, break)
-AC_CHECK_FUNCS(strcmp)
-
-AC_REQUIRE([AC_LTDL_ENABLE_INSTALL])dnl
-AC_REQUIRE([AC_LTDL_SHLIBEXT])dnl
-AC_REQUIRE([AC_LTDL_SHLIBPATH])dnl
-AC_REQUIRE([AC_LTDL_SYSSEARCHPATH])dnl
-AC_REQUIRE([AC_LTDL_OBJDIR])dnl
-AC_REQUIRE([AC_LTDL_DLPREOPEN])dnl
-AC_REQUIRE([AC_LTDL_DLLIB])dnl
-AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])dnl
-])
-
-AC_DEFUN(AC_LTDL_ENABLE_INSTALL,
-[AC_ARG_ENABLE(ltdl-install,
-[ --enable-ltdl-install install libltdl])
-
-AM_CONDITIONAL(INSTALL_LTDL, test x"${enable_ltdl_install-no}" != xno)
-AM_CONDITIONAL(CONVENIENCE_LTDL, test x"${enable_ltdl_convenience-no}" != xno)
-])])
-
-
-AC_DEFUN(AC_LTDL_SNARF_CONFIG,
-[# Read the libtool configuration
-rm -f conftest
-./libtool --config > conftest
-. ./conftest
-rm -f conftest
-])
-
-AC_DEFUN(AC_LTDL_SHLIBEXT,
-[AC_REQUIRE([AC_LTDL_SNARF_CONFIG])dnl
-AC_CACHE_CHECK([which extension is used for shared libraries],
- libltdl_cv_shlibext, [dnl
-(
- last=
- for spec in $library_names_spec; do
- last="$spec"
- done
-changequote(, )
- echo "$last" | sed 's/\[.*\]//;s/^[^.]*//;s/\$.*$//;s/\.$//' > conftest
-changequote([, ])
-)
-libltdl_cv_shlibext=`cat conftest`
-rm -f conftest
-])
-if test -n "$libltdl_cv_shlibext"; then
- AC_DEFINE_UNQUOTED(LTDL_SHLIB_EXT, "$libltdl_cv_shlibext",
- [Define to the extension used for shared libraries, say, ".so". ])
-fi
-])
-
-AC_DEFUN(AC_LTDL_SHLIBPATH,
-[AC_REQUIRE([AC_LTDL_SNARF_CONFIG])dnl
-AC_CACHE_CHECK([which variable specifies run-time library path],
- libltdl_cv_shlibpath_var, [libltdl_cv_shlibpath_var="$shlibpath_var"])
-if test -n "$libltdl_cv_shlibpath_var"; then
- AC_DEFINE_UNQUOTED(LTDL_SHLIBPATH_VAR, "$libltdl_cv_shlibpath_var",
- [Define to the name of the environment variable that determines the dynamic library search path. ])
-fi
-])
-
-AC_DEFUN(AC_LTDL_SYSSEARCHPATH,
-[AC_REQUIRE([AC_LTDL_SNARF_CONFIG])dnl
-AC_CACHE_CHECK([for the default library search path],
- libltdl_cv_sys_search_path, [libltdl_cv_sys_search_path="$sys_lib_dlsearch_path_spec"])
-if test -n "$libltdl_cv_sys_search_path"; then
- case "$host" in
- *-*-mingw*) pathsep=";" ;;
- *) pathsep=":" ;;
- esac
- sys_search_path=
- for dir in $libltdl_cv_sys_search_path; do
- if test -z "$sys_search_path"; then
- sys_search_path="$dir"
- else
- sys_search_path="$sys_search_path$pathsep$dir"
- fi
- done
- AC_DEFINE_UNQUOTED(LTDL_SYSSEARCHPATH, "$sys_search_path",
- [Define to the system default library search path. ])
-fi
-])
-
-AC_DEFUN(AC_LTDL_OBJDIR,
-[AC_CACHE_CHECK([for objdir],
- libltdl_cv_objdir, [libltdl_cv_objdir="$objdir"
-if test -n "$objdir"; then
- :
-else
- rm -f .libs 2>/dev/null
- mkdir .libs 2>/dev/null
- if test -d .libs; then
- libltdl_cv_objdir=.libs
- else
- # MS-DOS does not allow filenames that begin with a dot.
- libltdl_cv_objdir=_libs
- fi
-rmdir .libs 2>/dev/null
-fi])
-AC_DEFINE_UNQUOTED(LTDL_OBJDIR, "$libltdl_cv_objdir/",
- [Define to the sub-directory in which libtool stores uninstalled libraries. ])
-])
-
-AC_DEFUN(AC_LTDL_DLPREOPEN,
-[AC_REQUIRE([AC_LTDL_GLOBAL_SYMBOL_PIPE])dnl
-AC_CACHE_CHECK([whether libtool supports -dlopen/-dlpreopen],
- libltdl_cv_preloaded_symbols, [dnl
- if test -n "$global_symbol_pipe"; then
- libltdl_cv_preloaded_symbols=yes
- else
- libltdl_cv_preloaded_symbols=no
- fi
-])
-if test x"$libltdl_cv_preloaded_symbols" = x"yes"; then
- AC_DEFINE(HAVE_PRELOADED_SYMBOLS, 1,
- [Define if libtool can extract symbol lists from object files. ])
-fi
-])
-
-AC_DEFUN(AC_LTDL_DLLIB,
-[LIBADD_DL=
-AC_CHECK_LIB(dl, dlopen, [AC_DEFINE(HAVE_LIBDL, 1,
- [Define if you have the libdl library or equivalent. ]) LIBADD_DL="-ldl"],
-[AC_CHECK_FUNC(dlopen, [AC_DEFINE(HAVE_LIBDL, 1,
- [Define if you have the libdl library or equivalent.])],
-[AC_CHECK_LIB(svld, dlopen, [AC_DEFINE(HAVE_LIBDL, 1,
- [Define if you have the libdl library or equivalent.]) LIBADD_DL="-lsvld"]
-)])])
-AC_CHECK_FUNC(shl_load, [AC_DEFINE(HAVE_SHL_LOAD, 1,
- [Define if you have the shl_load function.])],
-[AC_CHECK_LIB(dld, shl_load,
- [AC_DEFINE(HAVE_SHL_LOAD, 1,
- [Define if you have the shl_load function.])
- LIBADD_DL="$LIBADD_DL -ldld"])
-])
-AC_CHECK_LIB(dld, dld_link, [AC_DEFINE(HAVE_DLD, 1,
- [Define if you have the GNU dld library.])dnl
-test "x$ac_cv_lib_dld_shl_load" = yes || LIBADD_DL="$LIBADD_DL -ldld"])
-AC_SUBST(LIBADD_DL)
-
-if test "x$ac_cv_func_dlopen" = xyes || test "x$ac_cv_lib_dl_dlopen" = xyes; then
- LIBS_SAVE="$LIBS"
- LIBS="$LIBS $LIBADD_DL"
- AC_CHECK_FUNCS(dlerror)
- LIBS="$LIBS_SAVE"
-fi
-])
-
-AC_DEFUN(AC_LTDL_GLOBAL_SYMBOL_PIPE,
-[dnl Check for command to grab the raw symbol name followed
-dnl by C symbol name from nm.
-AC_REQUIRE([AC_CANONICAL_HOST])dnl
-AC_REQUIRE([AC_PROG_NM])dnl
-# Check for command to grab the raw symbol name followed by C symbol from nm.
-AC_MSG_CHECKING([command to parse $NM output])
-AC_CACHE_VAL(ac_cv_sys_global_symbol_pipe,
-[# These are sane defaults that work on at least a few old systems.
-# {They come from Ultrix. What could be older than Ultrix?!! ;)}
-
-changequote(,)dnl
-# Character class describing NM global symbol codes.
-ac_symcode='[BCDEGRST]'
-
-# Regexp to match symbols that can be accessed directly from C.
-ac_sympat='\([_A-Za-z][_A-Za-z0-9]*\)'
-
-# Transform the above into a raw symbol and a C symbol.
-ac_symxfrm='\1 \2\3 \3'
-
-# Transform an extracted symbol line into a proper C declaration
-ac_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'"
-
-# Define system-specific variables.
-case "$host_os" in
-aix*)
- ac_symcode='[BCDT]'
- ;;
-cygwin* | mingw*)
- ac_symcode='[ABCDGISTW]'
- ;;
-hpux*)
- ac_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^. .* \(.*\)$/extern char \1;/p'"
- ;;
-irix*)
- ac_symcode='[BCDEGRST]'
- ;;
-solaris*)
- ac_symcode='[BDT]'
- ;;
-esac
-
-# If we're using GNU nm, then use its standard symbol codes.
-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then
- ac_symcode='[ABCDGISTW]'
-fi
-changequote([,])dnl
-
-# Try without a prefix undercore, then with it.
-for ac_symprfx in "" "_"; do
-
- ac_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($ac_symcode\)[ ][ ]*\($ac_symprfx\)$ac_sympat$/$ac_symxfrm/p'"
-
- # Check to see that the pipe works correctly.
- ac_pipe_works=no
- rm -f conftest.$ac_ext
- cat > conftest.$ac_ext <<EOF
-#ifdef __cplusplus
-extern "C" {
-#endif
-char nm_test_var;
-void nm_test_func(){}
-#ifdef __cplusplus
-}
-#endif
-int main(){nm_test_var='a';nm_test_func;return 0;}
-EOF
-
- if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
-
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
-
- # Try sorting and uniquifying the output.
- if sort "$ac_nlist" | uniq > "$ac_nlist"T; then
- mv -f "$ac_nlist"T "$ac_nlist"
- else
- rm -f "$ac_nlist"T
- fi
-
- # Make sure that we snagged all the symbols we need.
- if egrep ' nm_test_var$' "$ac_nlist" >/dev/null; then
- if egrep ' nm_test_func$' "$ac_nlist" >/dev/null; then
- cat <<EOF > conftest.c
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-EOF
- # Now generate the symbol file.
- eval "$ac_global_symbol_to_cdecl"' < "$ac_nlist" >> conftest.c'
-
- cat <<EOF >> conftest.c
-#if defined (__STDC__) && __STDC__
-# define lt_ptr_t void *
-#else
-# define lt_ptr_t char *
-# define const
-#endif
-
-/* The mapping between symbol names and symbols. */
-const struct {
- const char *name;
- lt_ptr_t address;
-}
-changequote(,)dnl
-lt_preloaded_symbols[] =
-changequote([,])dnl
-{
-EOF
- sed 's/^. \(.*\) \(.*\)$/ {"\2", (lt_ptr_t) \&\2},/' < "$ac_nlist" >> conftest.c
- cat <<\EOF >> conftest.c
- {0, (lt_ptr_t) 0}
-};
-
-#ifdef __cplusplus
-}
-#endif
-EOF
- # Now try linking the two files.
- mv conftest.$ac_objext conftstm.$ac_objext
- ac_save_LIBS="$LIBS"
- ac_save_CFLAGS="$CFLAGS"
- LIBS="conftstm.$ac_objext"
- CFLAGS="$CFLAGS$no_builtin_flag"
- if AC_TRY_EVAL(ac_link) && test -s conftest; then
- ac_pipe_works=yes
- else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- LIBS="$ac_save_LIBS"
- CFLAGS="$ac_save_CFLAGS"
- else
- echo "cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot find nm_test_var in $ac_nlist" >&AC_FD_CC
- fi
- else
- echo "cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
- else
- echo "$progname: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
- fi
- rm -rf conftest* conftst*
-
- # Do not use the global_symbol_pipe unless it works.
- if test "$ac_pipe_works" = yes; then
- if test x"$ac_symprfx" = x"_"; then
- ac_cv_sys_symbol_underscore=yes
- else
- ac_cv_sys_symbol_underscore=no
- fi
- break
- else
- ac_cv_sys_global_symbol_pipe=
- fi
-done
-])
-
-ac_result=yes
-if test -z "$ac_cv_sys_global_symbol_pipe"; then
- ac_result=no
-fi
-AC_MSG_RESULT($ac_result)
-])
-
-AC_DEFUN(AC_LTDL_SYMBOL_USCORE,
-[dnl does the compiler prefix global symbols with an underscore?
-AC_REQUIRE([AC_LTDL_GLOBAL_SYMBOL_PIPE])dnl
-AC_MSG_CHECKING([for _ prefix in compiled symbols])
-AC_CACHE_VAL(ac_cv_sys_symbol_underscore,
-[ac_cv_sys_symbol_underscore=no
-cat > conftest.$ac_ext <<EOF
-void nm_test_func(){}
-int main(){nm_test_func;return 0;}
-EOF
-if AC_TRY_EVAL(ac_compile); then
- # Now try to grab the symbols.
- ac_nlist=conftest.nm
- if AC_TRY_EVAL(NM conftest.$ac_objext \| $ac_cv_sys_global_symbol_pipe \> $ac_nlist) && test -s "$ac_nlist"; then
- # See whether the symbols have a leading underscore.
- if egrep '^. _nm_test_func' "$ac_nlist" >/dev/null; then
- ac_cv_sys_symbol_underscore=yes
- else
- if egrep '^. nm_test_func ' "$ac_nlist" >/dev/null; then
- :
- else
- echo "configure: cannot find nm_test_func in $ac_nlist" >&AC_FD_CC
- fi
- fi
- else
- echo "configure: cannot run $ac_cv_sys_global_symbol_pipe" >&AC_FD_CC
- fi
-else
- echo "configure: failed program was:" >&AC_FD_CC
- cat conftest.c >&AC_FD_CC
-fi
-rm -rf conftest*
-])
-AC_MSG_RESULT($ac_cv_sys_symbol_underscore)
-AC_LTDL_DLSYM_USCORE
-])
-
-AC_DEFUN(AC_LTDL_DLSYM_USCORE,
-[AC_REQUIRE([AC_LTDL_SYMBOL_USCORE])dnl
-if test x"$ac_cv_sys_symbol_underscore" = xyes; then
- if test x"$ac_cv_func_dlopen" = xyes ||
- test x"$ac_cv_lib_dl_dlopen" = xyes ; then
- AC_CACHE_CHECK([whether we have to add an underscore for dlsym],
- libltdl_cv_need_uscore, [dnl
- AC_TRY_RUN([
-#if HAVE_DLFCN_H
-#include <dlfcn.h>
-#endif
-
-#include <stdio.h>
-
-#ifdef RTLD_GLOBAL
-# define LTDL_GLOBAL RTLD_GLOBAL
-#else
-# ifdef DL_GLOBAL
-# define LTDL_GLOBAL DL_GLOBAL
-# else
-# define LTDL_GLOBAL 0
-# endif
-#endif
-
-/* We may have to define LTDL_LAZY_OR_NOW in the command line if we
- find out it does not work in some platform. */
-#ifndef LTDL_LAZY_OR_NOW
-# ifdef RTLD_LAZY
-# define LTDL_LAZY_OR_NOW RTLD_LAZY
-# else
-# ifdef DL_LAZY
-# define LTDL_LAZY_OR_NOW DL_LAZY
-# else
-# ifdef RTLD_NOW
-# define LTDL_LAZY_OR_NOW RTLD_NOW
-# else
-# ifdef DL_NOW
-# define LTDL_LAZY_OR_NOW DL_NOW
-# else
-# define LTDL_LAZY_OR_NOW 0
-# endif
-# endif
-# endif
-# endif
-#endif
-
-fnord() { int i=42;}
-main() { void *self, *ptr1, *ptr2; self=dlopen(0,LTDL_GLOBAL|LTDL_LAZY_OR_NOW);
- if(self) { ptr1=dlsym(self,"fnord"); ptr2=dlsym(self,"_fnord");
- if(ptr1 && !ptr2) { dlclose(self); exit(0); } } exit(1); }
-], libltdl_cv_need_uscore=no, libltdl_cv_need_uscore=yes,
- libltdl_cv_need_uscore=cross
-)])
- fi
-fi
-
-if test x"$libltdl_cv_need_uscore" = xyes; then
- AC_DEFINE(NEED_USCORE, 1,
- [Define if dlsym() requires a leading underscode in symbol names. ])
-fi
-])
-
-# Define a conditional.
-
-AC_DEFUN(AM_CONDITIONAL,
-[AC_SUBST($1_TRUE)
-AC_SUBST($1_FALSE)
-if $2; then
- $1_TRUE=
- $1_FALSE='#'
-else
- $1_TRUE='#'
- $1_FALSE=
-fi])
-
-# Do all the work for Automake. This macro actually does too much --
-# some checks are only needed if your package does certain things.
-# But this isn't really a big deal.
-
-# serial 1
-
-dnl Usage:
-dnl AM_INIT_AUTOMAKE(package,version, [no-define])
-
-AC_DEFUN(AM_INIT_AUTOMAKE,
-[AC_REQUIRE([AC_PROG_INSTALL])
-PACKAGE=[$1]
-AC_SUBST(PACKAGE)
-VERSION=[$2]
-AC_SUBST(VERSION)
-dnl test to see if srcdir already configured
-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then
- AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-fi
-ifelse([$3],,
-AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package])
-AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package]))
-AC_REQUIRE([AM_SANITY_CHECK])
-AC_REQUIRE([AC_ARG_PROGRAM])
-dnl FIXME This is truly gross.
-missing_dir=`cd $ac_aux_dir && pwd`
-AM_MISSING_PROG(ACLOCAL, aclocal, $missing_dir)
-AM_MISSING_PROG(AUTOCONF, autoconf, $missing_dir)
-AM_MISSING_PROG(AUTOMAKE, automake, $missing_dir)
-AM_MISSING_PROG(AUTOHEADER, autoheader, $missing_dir)
-AM_MISSING_PROG(MAKEINFO, makeinfo, $missing_dir)
-AC_REQUIRE([AC_PROG_MAKE_SET])])
-
-#
-# Check to make sure that the build environment is sane.
-#
-
-AC_DEFUN(AM_SANITY_CHECK,
-[AC_MSG_CHECKING([whether build environment is sane])
-# Just in case
-sleep 1
-echo timestamp > conftestfile
-# Do `set' in a subshell so we don't clobber the current shell's
-# arguments. Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null`
- if test "[$]*" = "X"; then
- # -L didn't work.
- set X `ls -t $srcdir/configure conftestfile`
- fi
- if test "[$]*" != "X $srcdir/configure conftestfile" \
- && test "[$]*" != "X conftestfile $srcdir/configure"; then
-
- # If neither matched, then we have a broken ls. This can happen
- # if, for instance, CONFIG_SHELL is bash and it inherits a
- # broken ls alias from the environment. This has actually
- # happened. Such a system could not be considered "sane".
- AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken
-alias in your environment])
- fi
-
- test "[$]2" = conftestfile
- )
-then
- # Ok.
- :
-else
- AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-rm -f conftest*
-AC_MSG_RESULT(yes)])
-
-dnl AM_MISSING_PROG(NAME, PROGRAM, DIRECTORY)
-dnl The program must properly implement --version.
-AC_DEFUN(AM_MISSING_PROG,
-[AC_MSG_CHECKING(for working $2)
-# Run test in a subshell; some versions of sh will print an error if
-# an executable is not found, even if stderr is redirected.
-# Redirect stdin to placate older versions of autoconf. Sigh.
-if ($2 --version) < /dev/null > /dev/null 2>&1; then
- $1=$2
- AC_MSG_RESULT(found)
-else
- $1="$3/missing $2"
- AC_MSG_RESULT(missing)
-fi
-AC_SUBST($1)])
-
-# Like AC_CONFIG_HEADER, but automatically create stamp file.
-
-AC_DEFUN(AM_CONFIG_HEADER,
-[AC_PREREQ([2.12])
-AC_CONFIG_HEADER([$1])
-dnl When config.status generates a header, we must update the stamp-h file.
-dnl This file resides in the same directory as the config header
-dnl that is generated. We must strip everything past the first ":",
-dnl and everything past the last "/".
-AC_OUTPUT_COMMANDS(changequote(<<,>>)dnl
-ifelse(patsubst(<<$1>>, <<[^ ]>>, <<>>), <<>>,
-<<test -z "<<$>>CONFIG_HEADERS" || echo timestamp > patsubst(<<$1>>, <<^\([^:]*/\)?.*>>, <<\1>>)stamp-h<<>>dnl>>,
-<<am_indx=1
-for am_file in <<$1>>; do
- case " <<$>>CONFIG_HEADERS " in
- *" <<$>>am_file "*<<)>>
- echo timestamp > `echo <<$>>am_file | sed -e 's%:.*%%' -e 's%[^/]*$%%'`stamp-h$am_indx
- ;;
- esac
- am_indx=`expr "<<$>>am_indx" + 1`
-done<<>>dnl>>)
-changequote([,]))])
-
-# Add --enable-maintainer-mode option to configure.
-# From Jim Meyering
-
-# serial 1
-
-AC_DEFUN(AM_MAINTAINER_MODE,
-[AC_MSG_CHECKING([whether to enable maintainer-specific portions of Makefiles])
- dnl maintainer-mode is disabled by default
- AC_ARG_ENABLE(maintainer-mode,
-[ --enable-maintainer-mode enable make rules and dependencies not useful
- (and sometimes confusing) to the casual installer],
- USE_MAINTAINER_MODE=$enableval,
- USE_MAINTAINER_MODE=no)
- AC_MSG_RESULT($USE_MAINTAINER_MODE)
- AM_CONDITIONAL(MAINTAINER_MODE, test $USE_MAINTAINER_MODE = yes)
- MAINT=$MAINTAINER_MODE_TRUE
- AC_SUBST(MAINT)dnl
-]
-)
-
projects / msp430-gcc.git / blobdiff