--- /dev/null
+/*
+ * Copyright (c) 2008, Titanium Mirror, Inc.
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright notice,
+ * this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the distribution.
+ * - Neither the name of the Technische Universität Berlin nor the names
+ * of its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
+ * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
+ * OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED
+ * TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY
+ * OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE
+ * USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ */
+
+/**
+ * Interrupt interface for USCI peripherals. Although A and B devices have
+ * different interrupt sets since B only support I2C, we use a single set for
+ * both so that upper layers need not deal with the different sets. This is
+ * critical in the case of SPI communications, which is supported by both A
+ * and B devices.
+ *
+ * @author R. Steve McKown <rsmckown@gmail.com>
+ */
+
+#include "msp430usci.h"
+
+interface HplMsp430UsciInt {
+ /**
+ * Signals a break received in UART modes if UCBRKIE is enabled. The
+ * provider must reset the UCxIFG.UCxxRXIFG and UCxSTAT.UCBRK bits prior to
+ * signalling the event to the user.
+ */
+ async event void brk();
+
+ /**
+ * Signals a character received for any USCI mode. The provider must reset
+ * UCxIFG.UCxxRXIFG before signalling the event to the user.
+ *
+ * @params c The character received.
+ */
+ async event void rx(char c);
+
+ /**
+ * Signals that the device's transmit buffer is empty and can accept
+ * another character. Note that the USCI device may still be in the
+ * process of transmitting the last character when this event is signalled.
+ * The UCxxTXIFG bit will automatically reset when the interface user writes
+ * a value to the related UCxxTXBUF register after receipt of this event.
+ */
+ async event void tx();
+
+ /**
+ * I2C mode only. Indicates the device has lost arbitration. Valid only in
+ * multi-master contexts.
+ */
+ async event void i2cCal();
+
+ /**
+ * I2C mode only. Indicates the device was expecting an ACK and it was not
+ * received.
+ */
+ async event void i2cNak();
+
+ /**
+ * I2C mode only. Indicates the device has detected a start condition
+ * together with its own address while in slave mode.
+ */
+ async event void i2cStart();
+
+ /**
+ * I2C mode only. Indicates the device has detected a stop condition while
+ * in slave mode.
+ */
+ async event void i2cStop();
+}