-/*\r
- * Copyright (c) 2005-2006 Rincon Research Corporation\r
- * All rights reserved.\r
- *\r
- * Redistribution and use in source and binary forms, with or without\r
- * modification, are permitted provided that the following conditions\r
- * are met:\r
- * - Redistributions of source code must retain the above copyright\r
- * notice, this list of conditions and the following disclaimer.\r
- * - Redistributions in binary form must reproduce the above copyright\r
- * notice, this list of conditions and the following disclaimer in the\r
- * documentation and/or other materials provided with the\r
- * distribution.\r
- * - Neither the name of the Arch Rock Corporation nor the names of\r
- * its contributors may be used to endorse or promote products derived\r
- * from this software without specific prior written permission.\r
- *\r
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS\r
- * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT\r
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS\r
- * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE\r
- * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,\r
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES\r
- * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR\r
- * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)\r
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,\r
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)\r
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED\r
- * OF THE POSSIBILITY OF SUCH DAMAGE\r
- */\r
- \r
-/**\r
- * Low Power Listening interface\r
- *\r
- * @author David Moss\r
- * @author Jonathan Hui\r
- */\r
- \r
-interface LowPowerListening {\r
-\r
- /**\r
- * Set this this node's radio sleep interval, in milliseconds.\r
- * Once every interval, the node will sleep and perform an Rx check \r
- * on the radio. Setting the sleep interval to 0 will keep the radio\r
- * always on.\r
- *\r
- * This is the equivalent of setting the local duty cycle rate.\r
- *\r
- * @param sleepIntervalMs the length of this node's Rx check interval, in [ms]\r
- */\r
- command void setLocalSleepInterval(uint16_t sleepIntervalMs);\r
- \r
- /**\r
- * @return the local node's sleep interval, in [ms]\r
- */\r
- command uint16_t getLocalSleepInterval();\r
- \r
- /**\r
- * Set this node's radio duty cycle rate, in units of [percentage*100].\r
- * For example, to get a 0.05% duty cycle,\r
- * <code>\r
- * call LowPowerListening.setDutyCycle(5); // or equivalently...\r
- * call LowPowerListening.setDutyCycle(00005); // for better readability?\r
- * </code>\r
- *\r
- * For a 100% duty cycle (always on),\r
- * <code>\r
- * call LowPowerListening.setDutyCycle(10000);\r
- * </code>\r
- *\r
- * This is the equivalent of setting the local sleep interval explicitly.\r
- * \r
- * @param dutyCycle The duty cycle percentage, in units of [percentage*100]\r
- */\r
- command void setLocalDutyCycle(uint16_t dutyCycle);\r
- \r
- /**\r
- * @return this node's radio duty cycle rate, in units of [percentage*100]\r
- */\r
- command uint16_t getLocalDutyCycle();\r
- \r
- \r
- /**\r
- * Configure this outgoing message so it can be transmitted to a neighbor mote\r
- * with the specified Rx sleep interval.\r
- * @param msg Pointer to the message that will be sent\r
- * @param sleepInterval The receiving node's sleep interval, in [ms]\r
- */\r
- command void setRxSleepInterval(message_t *msg, uint16_t sleepIntervalMs);\r
- \r
- /**\r
- * @return the destination node's sleep interval configured in this message\r
- */\r
- command uint16_t getRxSleepInterval(message_t *msg);\r
- \r
- /**\r
- * Configure this outgoing message so it can be transmitted to a neighbor mote\r
- * with the specified Rx duty cycle rate.\r
- * Duty cycle is in units of [percentage*100], i.e. 0.25% duty cycle = 25.\r
- * \r
- * @param msg Pointer to the message that will be sent\r
- * @param dutyCycle The duty cycle of the receiving mote, in units of \r
- * [percentage*100]\r
- */\r
- command void setRxDutyCycle(message_t *msg, uint16_t dutyCycle);\r
- \r
- /**\r
- * @return the destination node's duty cycle configured in this message\r
- * in units of [percentage*100]\r
- */\r
- command uint16_t getRxDutyCycle(message_t *msg);\r
- \r
- /**\r
- * Convert a duty cycle, in units of [percentage*100], to\r
- * the sleep interval of the mote in milliseconds\r
- * @param dutyCycle The duty cycle in units of [percentage*100]\r
- * @return The equivalent sleep interval, in units of [ms]\r
- */\r
- command uint16_t dutyCycleToSleepInterval(uint16_t dutyCycle);\r
- \r
- /**\r
- * Convert a sleep interval, in units of [ms], to a duty cycle\r
- * in units of [percentage*100]\r
- * @param sleepInterval The sleep interval in units of [ms]\r
- * @return The duty cycle in units of [percentage*100]\r
- */\r
- command uint16_t sleepIntervalToDutyCycle(uint16_t sleepInterval);\r
- \r
-}\r
+/*
+ * Copyright (c) 2005-2006 Rincon Research Corporation
+ * All rights reserved.
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * - Redistributions of source code must retain the above copyright
+ * notice, this list of conditions and the following disclaimer.
+ * - Redistributions in binary form must reproduce the above copyright
+ * notice, this list of conditions and the following disclaimer in the
+ * documentation and/or other materials provided with the
+ * distribution.
+ * - Neither the name of the Arch Rock Corporation nor the names of
+ * its contributors may be used to endorse or promote products derived
+ * from this software without specific prior written permission.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
+ * ``AS IS'' AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
+ * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS
+ * FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE
+ * ARCHED ROCK OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES
+ * (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
+ * SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
+ * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED
+ * OF THE POSSIBILITY OF SUCH DAMAGE
+ */
+
+/**
+ * Low Power Listening interface
+ *
+ * @author David Moss
+ * @author Jonathan Hui
+ */
+
+interface LowPowerListening {
+
+ /**
+ * Set this this node's radio sleep interval, in milliseconds.
+ * Once every interval, the node will sleep and perform an Rx check
+ * on the radio. Setting the sleep interval to 0 will keep the radio
+ * always on.
+ *
+ * This is the equivalent of setting the local duty cycle rate.
+ *
+ * @param sleepIntervalMs the length of this node's Rx check interval, in [ms]
+ */
+ command void setLocalSleepInterval(uint16_t sleepIntervalMs);
+
+ /**
+ * @return the local node's sleep interval, in [ms]
+ */
+ command uint16_t getLocalSleepInterval();
+
+ /**
+ * Set this node's radio duty cycle rate, in units of [percentage*100].
+ * For example, to get a 0.05% duty cycle,
+ * <code>
+ * call LowPowerListening.setDutyCycle(5); // or equivalently...
+ * call LowPowerListening.setDutyCycle(00005); // for better readability?
+ * </code>
+ *
+ * For a 100% duty cycle (always on),
+ * <code>
+ * call LowPowerListening.setDutyCycle(10000);
+ * </code>
+ *
+ * This is the equivalent of setting the local sleep interval explicitly.
+ *
+ * @param dutyCycle The duty cycle percentage, in units of [percentage*100]
+ */
+ command void setLocalDutyCycle(uint16_t dutyCycle);
+
+ /**
+ * @return this node's radio duty cycle rate, in units of [percentage*100]
+ */
+ command uint16_t getLocalDutyCycle();
+
+
+ /**
+ * Configure this outgoing message so it can be transmitted to a neighbor mote
+ * with the specified Rx sleep interval.
+ * @param msg Pointer to the message that will be sent
+ * @param sleepInterval The receiving node's sleep interval, in [ms]
+ */
+ command void setRxSleepInterval(message_t *msg, uint16_t sleepIntervalMs);
+
+ /**
+ * @return the destination node's sleep interval configured in this message
+ */
+ command uint16_t getRxSleepInterval(message_t *msg);
+
+ /**
+ * Configure this outgoing message so it can be transmitted to a neighbor mote
+ * with the specified Rx duty cycle rate.
+ * Duty cycle is in units of [percentage*100], i.e. 0.25% duty cycle = 25.
+ *
+ * @param msg Pointer to the message that will be sent
+ * @param dutyCycle The duty cycle of the receiving mote, in units of
+ * [percentage*100]
+ */
+ command void setRxDutyCycle(message_t *msg, uint16_t dutyCycle);
+
+ /**
+ * @return the destination node's duty cycle configured in this message
+ * in units of [percentage*100]
+ */
+ command uint16_t getRxDutyCycle(message_t *msg);
+
+ /**
+ * Convert a duty cycle, in units of [percentage*100], to
+ * the sleep interval of the mote in milliseconds
+ * @param dutyCycle The duty cycle in units of [percentage*100]
+ * @return The equivalent sleep interval, in units of [ms]
+ */
+ command uint16_t dutyCycleToSleepInterval(uint16_t dutyCycle);
+
+ /**
+ * Convert a sleep interval, in units of [ms], to a duty cycle
+ * in units of [percentage*100]
+ * @param sleepInterval The sleep interval in units of [ms]
+ * @return The duty cycle in units of [percentage*100]
+ */
+ command uint16_t sleepIntervalToDutyCycle(uint16_t sleepInterval);
+
+}