Update READMEs

[tinyos-2.x.git] / apps / tosthreads / apps / TestCollection / README

diff --git a/apps/tosthreads/apps/TestCollection/README b/apps/tosthreads/apps/TestCollection/README
index 62061ce9e9e9503ad0b1459cd9efb4d9de517a4e..509e4d6cfd7283586dd1223f2a6f5c395581863e 100644 (file)
--- a/apps/tosthreads/apps/TestCollection/README
+++ b/apps/tosthreads/apps/TestCollection/README
@@ -12,9 +12,9 @@ subdirectory. The sampling rate starts at 4Hz, but can be changed from the Java
 application.
 
 You can install TestCollection on a mote via the following command:
-  make <platform> cthreads install
+  make <platform> threads install
 
-Valid platforms are currently: tmote, telosb, mica2, micaz and iris
+Valid platforms are currently: tmote, telosb, mica2, micaz, iris, and epic
 
 At least two motes must be used by this application, with one of them installed
 as a base station.  Base station motes can be created by installing them with
@@ -27,7 +27,7 @@ All other nodes can be installed with arbitrary NODE_IDs.
   make <platform> threads install.123
 
 Successful running of this application is verified by all NON-base station motes
-periodically flashing LED0 upon sending a message, and the base station mote,
+periodically flashing LED1 upon sending a message, and the base station mote,
 flashing LED2 upon successful reception of a message.  Additionally, correct
 operation should be verified by running the java tool described in the following
 section.
@@ -39,11 +39,16 @@ MultihopOscilloscope demo via a serial forwarder. To run it, change to the
 TestCollection/java subdirectory and type:
 
   make
-  java net.tinyos.sf.SerialForwarder -comm serial@<serial port>:<mote>
-  # e.g., java net.tinyps.sf.SerialForwarder -comm serial@/dev/ttyUSB0:mica2
-  # or java net.tinyps.sf.SerialForwarder -comm serial@COM2:telosb
+  java net.tinyos.sf.SerialForwarder -comm serial@<serial port>:<baud_rate>
+  # e.g., java net.tinyos.sf.SerialForwarder -comm serial@/dev/ttyUSB0:mica2
+  # or java net.tinyos.sf.SerialForwarder -comm serial@COM2:telosb
   ./run
 
+NOTE::  The baud rate 57600 must be used telos based motes, as its configuration
+has been changed to work with this baud rate when compiled for TOSThreads. I.e.
+DO NOT just substitute 'telosb' or 'tmote' for <baud_rate> above.  Explicitly
+set it to 57600.
+
 The controls at the bottom of the screen allow you to zoom in or out the X
 axis, change the range of the Y axis, and clear all received data. You can
 change the color used to display a mote by clicking on its color in the