/* mips.h. Mips opcode list for GDB, the GNU debugger.
Copyright 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002,
- 2003, 2004, 2005
+ 2003, 2004, 2005, 2008, 2009
Free Software Foundation, Inc.
Contributed by Ralph Campbell and OSF
Commented and modified by Ian Lance Taylor, Cygnus Support
#define OP_SH_UDI4 6
#define OP_MASK_UDI4 0xfffff
+/* Octeon */
+#define OP_SH_BBITIND 16
+#define OP_MASK_BBITIND 0x1f
+#define OP_SH_CINSPOS 6
+#define OP_MASK_CINSPOS 0x1f
+#define OP_SH_CINSLM1 11
+#define OP_MASK_CINSLM1 0x1f
+#define OP_SH_SEQI 6
+#define OP_MASK_SEQI 0x3ff
+
/* This structure holds information for a particular instruction. */
struct mips_opcode
Each of these characters corresponds to a mask field defined above.
+ "1" 5 bit sync type (OP_*_SHAMT)
"<" 5 bit shift amount (OP_*_SHAMT)
">" shift amount between 32 and 63, stored after subtracting 32 (OP_*_SHAMT)
"a" 26 bit target address (OP_*_TARGET)
"+3" UDI immediate bits 6-20
"+4" UDI immediate bits 6-25
+ Octeon:
+ "+x" Bit index field of bbit. Enforces: 0 <= index < 32.
+ "+X" Bit index field of bbit aliasing bbit32. Matches if 32 <= index < 64,
+ otherwise skips to next candidate.
+ "+p" Position field of cins/cins32/exts/exts32. Enforces 0 <= pos < 32.
+ "+P" Position field of cins/exts aliasing cins32/exts32. Matches if
+ 32 <= pos < 64, otherwise skips to next candidate.
+ "+Q" Immediate field of seqi/snei. Enforces -512 <= imm < 512.
+ "+s" Length-minus-one field of cins/exts. Enforces: 0 <= lenm1 < 32.
+ "+S" Length-minus-one field of cins32/exts32 or cins/exts aliasing
+ cint32/exts32. Enforces non-negative value and that
+ pos + lenm1 < 32 or pos + lenm1 < 64 depending whether previous
+ position field is "+p" or "+P".
+
Other:
"()" parens surrounding optional value
"," separates operands
"+" Start of extension sequence.
Characters used so far, for quick reference when adding more:
- "234567890"
+ "1234567890"
"%[]<>(),+:'@!$*&"
"ABCDEFGHIJKLMNOPQRSTUVWXYZ"
"abcdefghijklopqrstuvwxz"
Extension character sequences used so far ("+" followed by the
following), for quick reference when adding more:
"1234"
- "ABCDEFGHIT"
- "t"
+ "ABCDEFGHIPQSTX"
+ "pstx"
*/
/* These are the bits which may be set in the pinfo field of an
#define INSN_MULT 0x40000000
/* Instruction synchronize shared memory. */
#define INSN_SYNC 0x80000000
+/* Instruction is actually a macro. It should be ignored by the
+ disassembler, and requires special treatment by the assembler. */
+#define INSN_MACRO 0xffffffff
/* These are the bits which may be set in the pinfo2 field of an
instruction. */
#define INSN2_READ_MDMX_ACC 0x00000002
/* Instruction writes MDMX accumulator. */
#define INSN2_WRITE_MDMX_ACC 0x00000004
-
-/* Instruction is actually a macro. It should be ignored by the
- disassembler, and requires special treatment by the assembler. */
-#define INSN_MACRO 0xffffffff
+/* Macro uses single-precision floating-point instructions. This should
+ only be set for macros. For instructions, FP_S in pinfo carries the
+ same information. */
+#define INSN2_M_FP_S 0x00000008
+/* Macro uses double-precision floating-point instructions. This should
+ only be set for macros. For instructions, FP_D in pinfo carries the
+ same information. */
+#define INSN2_M_FP_D 0x00000010
/* Masks used to mark instructions to indicate which MIPS ISA level
- they were introduced in. ISAs, as defined below, are logical
- ORs of these bits, indicating that they support the instructions
- defined at the given level. */
-
-#define INSN_ISA_MASK 0x00000fff
-#define INSN_ISA1 0x00000001
-#define INSN_ISA2 0x00000002
-#define INSN_ISA3 0x00000004
-#define INSN_ISA4 0x00000008
-#define INSN_ISA5 0x00000010
-#define INSN_ISA32 0x00000020
-#define INSN_ISA64 0x00000040
-#define INSN_ISA32R2 0x00000080
-#define INSN_ISA64R2 0x00000100
+ they were introduced in. INSN_ISA_MASK masks an enumeration that
+ specifies the base ISA level(s). The remainder of a 32-bit
+ word constructed using these macros is a bitmask of the remaining
+ INSN_* values below. */
+
+#define INSN_ISA_MASK 0x0000000ful
+
+/* We cannot start at zero due to ISA_UNKNOWN below. */
+#define INSN_ISA1 1
+#define INSN_ISA2 2
+#define INSN_ISA3 3
+#define INSN_ISA4 4
+#define INSN_ISA5 5
+#define INSN_ISA32 6
+#define INSN_ISA32R2 7
+#define INSN_ISA64 8
+#define INSN_ISA64R2 9
+/* Below this point the INSN_* values correspond to combinations of ISAs.
+ They are only for use in the opcodes table to indicate membership of
+ a combination of ISAs that cannot be expressed using the usual inclusion
+ ordering on the above INSN_* values. */
+#define INSN_ISA3_32 10
+#define INSN_ISA3_32R2 11
+#define INSN_ISA4_32 12
+#define INSN_ISA4_32R2 13
+#define INSN_ISA5_32R2 14
+
+/* Given INSN_ISA* values X and Y, where X ranges over INSN_ISA1 through
+ INSN_ISA5_32R2 and Y ranges over INSN_ISA1 through INSN_ISA64R2,
+ this table describes whether at least one of the ISAs described by X
+ is/are implemented by ISA Y. (Think of Y as the ISA level supported by
+ a particular core and X as the ISA level(s) at which a certain instruction
+ is defined.) The ISA(s) described by X is/are implemented by Y iff
+ (mips_isa_table[(Y & INSN_ISA_MASK) - 1] >> ((X & INSN_ISA_MASK) - 1)) & 1
+ is non-zero. */
+static const unsigned int mips_isa_table[] =
+ { 0x0001, 0x0003, 0x0607, 0x1e0f, 0x3e1f, 0x0a23, 0x3e63, 0x3ebf, 0x3fff };
+
+/* Masks used for Chip specific instructions. */
+#define INSN_CHIP_MASK 0xc3ff0820
+
+/* Cavium Networks Octeon instructions. */
+#define INSN_OCTEON 0x00000800
/* Masks used for MIPS-defined ASEs. */
#define INSN_ASE_MASK 0x3c00f000
/* MIPS-3D ASE */
#define INSN_MIPS3D 0x00008000
-/* Chip specific instructions. These are bitmasks. */
-
/* MIPS R4650 instruction. */
#define INSN_4650 0x00010000
/* LSI R4010 instruction. */
#define INSN_SMARTMIPS 0x10000000
/* DSP R2 ASE */
#define INSN_DSPR2 0x20000000
+/* ST Microelectronics Loongson 2E. */
+#define INSN_LOONGSON_2E 0x40000000
+/* ST Microelectronics Loongson 2F. */
+#define INSN_LOONGSON_2F 0x80000000
+/* RMI Xlr instruction */
+#define INSN_XLR 0x00000020
/* MIPS ISA defines, use instead of hardcoding ISA level. */
#define ISA_UNKNOWN 0 /* Gas internal use. */
-#define ISA_MIPS1 (INSN_ISA1)
-#define ISA_MIPS2 (ISA_MIPS1 | INSN_ISA2)
-#define ISA_MIPS3 (ISA_MIPS2 | INSN_ISA3)
-#define ISA_MIPS4 (ISA_MIPS3 | INSN_ISA4)
-#define ISA_MIPS5 (ISA_MIPS4 | INSN_ISA5)
+#define ISA_MIPS1 INSN_ISA1
+#define ISA_MIPS2 INSN_ISA2
+#define ISA_MIPS3 INSN_ISA3
+#define ISA_MIPS4 INSN_ISA4
+#define ISA_MIPS5 INSN_ISA5
-#define ISA_MIPS32 (ISA_MIPS2 | INSN_ISA32)
-#define ISA_MIPS64 (ISA_MIPS5 | INSN_ISA32 | INSN_ISA64)
+#define ISA_MIPS32 INSN_ISA32
+#define ISA_MIPS64 INSN_ISA64
-#define ISA_MIPS32R2 (ISA_MIPS32 | INSN_ISA32R2)
-#define ISA_MIPS64R2 (ISA_MIPS64 | INSN_ISA32R2 | INSN_ISA64R2)
+#define ISA_MIPS32R2 INSN_ISA32R2
+#define ISA_MIPS64R2 INSN_ISA64R2
/* CPU defines, use instead of hardcoding processor number. Keep this
#define CPU_RM9000 9000
#define CPU_R10000 10000
#define CPU_R12000 12000
+#define CPU_R14000 14000
+#define CPU_R16000 16000
#define CPU_MIPS16 16
#define CPU_MIPS32 32
#define CPU_MIPS32R2 33
#define CPU_MIPS64 64
#define CPU_MIPS64R2 65
#define CPU_SB1 12310201 /* octal 'SB', 01. */
+#define CPU_LOONGSON_2E 3001
+#define CPU_LOONGSON_2F 3002
+#define CPU_OCTEON 6501
+#define CPU_XLR 887682 /* decimal 'XLR' */
/* Test for membership in an ISA including chip specific ISAs. INSN
is pointer to an element of the opcode table; ISA is the specified
test, or zero if no CPU specific ISA test is desired. */
#define OPCODE_IS_MEMBER(insn, isa, cpu) \
- (((insn)->membership & isa) != 0 \
+ (((isa & INSN_ISA_MASK) != 0 \
+ && ((insn)->membership & INSN_ISA_MASK) != 0 \
+ && ((mips_isa_table [(isa & INSN_ISA_MASK) - 1] >> \
+ (((insn)->membership & INSN_ISA_MASK) - 1)) & 1) != 0) \
+ || ((isa & ~INSN_ISA_MASK) \
+ & ((insn)->membership & ~INSN_ISA_MASK)) != 0 \
|| (cpu == CPU_R4650 && ((insn)->membership & INSN_4650) != 0) \
|| (cpu == CPU_RM7000 && ((insn)->membership & INSN_4650) != 0) \
|| (cpu == CPU_RM9000 && ((insn)->membership & INSN_4650) != 0) \
|| (cpu == CPU_R4010 && ((insn)->membership & INSN_4010) != 0) \
|| (cpu == CPU_VR4100 && ((insn)->membership & INSN_4100) != 0) \
|| (cpu == CPU_R3900 && ((insn)->membership & INSN_3900) != 0) \
- || ((cpu == CPU_R10000 || cpu == CPU_R12000) \
+ || ((cpu == CPU_R10000 || cpu == CPU_R12000 || cpu == CPU_R14000 \
+ || cpu == CPU_R16000) \
&& ((insn)->membership & INSN_10000) != 0) \
|| (cpu == CPU_SB1 && ((insn)->membership & INSN_SB1) != 0) \
|| (cpu == CPU_R4111 && ((insn)->membership & INSN_4111) != 0) \
|| (cpu == CPU_VR4120 && ((insn)->membership & INSN_4120) != 0) \
|| (cpu == CPU_VR5400 && ((insn)->membership & INSN_5400) != 0) \
|| (cpu == CPU_VR5500 && ((insn)->membership & INSN_5500) != 0) \
+ || (cpu == CPU_LOONGSON_2E \
+ && ((insn)->membership & INSN_LOONGSON_2E) != 0) \
+ || (cpu == CPU_LOONGSON_2F \
+ && ((insn)->membership & INSN_LOONGSON_2F) != 0) \
+ || (cpu == CPU_OCTEON \
+ && ((insn)->membership & INSN_OCTEON) != 0) \
+ || (cpu == CPU_XLR && ((insn)->membership & INSN_XLR) != 0) \
|| 0) /* Please keep this term for easier source merging. */
/* This is a list of macro expanded instructions.
M_LWR_A,
M_LWR_AB,
M_LWU_AB,
+ M_MSGSND,
+ M_MSGLD,
+ M_MSGLD_T,
+ M_MSGWAIT,
+ M_MSGWAIT_T,
M_MOVE,
M_MUL,
M_MUL_I,
#define MIPS16OP_MASK_IMM6 0x3f
#define MIPS16OP_SH_IMM6 5
-/* These are the characters which may appears in the args field of an
- instruction. They appear in the order in which the fields appear
- when the instruction is used. Commas and parentheses in the args
- string are ignored when assembling, and written into the output
- when disassembling.
+/* These are the characters which may appears in the args field of a MIPS16
+ instruction. They appear in the order in which the fields appear when the
+ instruction is used. Commas and parentheses in the args string are ignored
+ when assembling, and written into the output when disassembling.
"y" 3 bit register (MIPS16OP_*_RY)
"x" 3 bit register (MIPS16OP_*_RX)
projects / msp430-binutils.git / blobdiff