This source works with dkms manually.

* sudo cp -a ./ /usr/src/cp210x-module-0.11-0tmi81
* sudo dkms add -m cp210x-module -v 0.11-0tmi81
* sudo dkms build -m cp210x-module -v 0.11-0tmi81
* sudo dkms install -m cp210x-module -v 0.11-0tmi81

diff --git a/Makefile b/Makefile
old mode 100644 (file)
new mode 100755 (executable)
index 2b77fc1..6488d65
--- a/Makefile
+++ b/Makefile
@@ -1,87 +1,18 @@
-# Makefile for newer cp2101 driver, we call cp210x
-# Essentially, it makes a debian source package which
-# then can be built by pbuilder, etc.
+#!/usr/bin/make -f
 
-DEBDIST = hardy
-BUILD = build
-KVER := $(shell uname -r)
-KSRCVER := $(shell echo $(KVER) | sed -e 's/-[0-9][^-]*-[a-zA-Z][^-]*$$//')
-PKGVER  = 0.11
-
-REPORELEASE := $(shell svn info 2>/dev/null | grep "Revision: " | sed -e s'/^[^0-9]*\([0-9]*\).*$$/\1/')
-ifeq (,$(REPORELEASE))
-  REPORELEASE := $(shell git svn info 2>/dev/null | grep "Revision: " | sed -e s'/^[^0-9]*\([0-9]*\).*$$/\1/')
-endif
-ifeq (,$(REPORELEASE))
-  $(error You much check the code out from svn using svn or git)
-endif
-
-DEBRELEASE := 0tmi$(REPORELEASE)
-DEBVER := $(PKGVER)-$(DEBRELEASE)
-RFC822DATE := $(shell date --rfc-822)
-ROOTNAME := cp210x
-PACKAGE := $(ROOTNAME)-module-$(KVER)
-TARFILE := $(PACKAGE)_$(DEBVER).orig.tar.gz
-DEBSRC := $(PACKAGE)-$(PKGVER)
-ARCH := $(shell dpkg-architecture -qDEB_HOST_ARCH)
-DEBFILE := $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).deb
-DEBSRCFILE := $(BUILD)/$(PACKAGE)_$(DEBVER).dsc
-
-
-source: $(DEBSRCFILE)
-$(DEBSRCFILE): $(BUILD)/debian-stamp
-       cd $(BUILD) && dpkg-source -b $(DEBSRC)
-       touch $@
-
-
-binary: $(DEBFILE)
-$(DEBFILE): $(BUILD)/debian-stamp
-       cd $(BUILD)/$(DEBSRC) && dpkg-buildpackage -sa -us -uc 
-
-
-$(BUILD)/src-stamp: $(wildcard src/*)
-       mkdir -p $(BUILD)
-       rm -rf $(BUILD)/$(DEBSRC)
-       cp -a src $(BUILD)/$(DEBSRC)
-       find $(BUILD)/$(DEBSRC) -name .svn -type d -exec rm -rf "{}" ";" 2>/dev/null || exit 0
-       rm -rf $(BUILD)/$(DEBSRC)/.git || exit 0
-       tar -C $(BUILD) -czf $(BUILD)/$(TARFILE) $(DEBSRC)
-       touch $@
-
-
-configure: $(BUILD)/debian-stamp
-$(BUILD)/debian-stamp: $(BUILD)/src-stamp $(wildcard debian.in/*)
-       mkdir -p $(BUILD)/$(DEBSRC)/debian
-       rsync --quiet -avz --exclude=.svn/ --exclude=.git/ debian.in/ $(BUILD)/$(DEBSRC)/debian/
-       perl -i -pe 's/xxPACKAGExx/$(PACKAGE)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxROOTNAMExx/$(ROOTNAME)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxPKGVERxx/$(PKGVER)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxKVERxx/$(KVER)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxKSRCVERxx/$(KSRCVER)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxDEBDISTxx/$(DEBDIST)/g' $(BUILD)/$(DEBSRC)/debian/*
-       perl -i -pe 's/xxRFC822DATExx/$(RFC822DATE)/g' $(BUILD)/$(DEBSRC)/debian/*
-       touch $@
+STRIP  = strip --strip-unneeded --remove-section=.comment --remove-section=.note
 
+all:
+       -rm -rf builddir
+       cp -a src builddir
+       cd builddir && ./configure -kver $(KVER)
+       test -f builddir/Makefile.go
+       $(MAKE) -C builddir -f Makefile.go
+       cp builddir/cp2101.ko cp210x.ko
+       $(STRIP) cp210x.ko
 
 clean:
-       rm -rf $(BUILD)
-
-
-debug:
-       @echo "BUILD = $(BUILD)"
-       @echo "KVER = $(KVER)"
-       @echo "PKGVER = $(PKGVER)"
-       @echo "REPORELEASE = |$(REPORELEASE)|"
-       @echo "DEBRELEASE = $(DEBRELEASE)"
-       @echo "DEBVER = $(DEBVER)"
-       @echo "RFC822DATE = $(RFC822DATE)"
-       @echo "PACKAGE = $(PACKAGE)"
-       @echo "TARFILE = $(TARFILE)"
-       @echo "DEBSRC = $(DEBSRC)"
-       @echo "ARCH = $(ARCH)"
-       @echo "DEBFILE = $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).deb"
-       @echo "DEBSRCFILE = $(BUILD)/$(PACKAGE)_$(DEBVER).dsc"
+       -rm -rf builddir cp210x.ko
 
 
-.PHONY: clean binary source configure
+.PHONY: all clean

diff --git a/Makefile.build b/Makefile.build
new file mode 100644 (file)
index 0000000..2b77fc1
--- /dev/null
+++ b/Makefile.build
@@ -0,0 +1,87 @@
+# Makefile for newer cp2101 driver, we call cp210x
+# Essentially, it makes a debian source package which
+# then can be built by pbuilder, etc.
+
+DEBDIST = hardy
+BUILD = build
+KVER := $(shell uname -r)
+KSRCVER := $(shell echo $(KVER) | sed -e 's/-[0-9][^-]*-[a-zA-Z][^-]*$$//')
+PKGVER  = 0.11
+
+REPORELEASE := $(shell svn info 2>/dev/null | grep "Revision: " | sed -e s'/^[^0-9]*\([0-9]*\).*$$/\1/')
+ifeq (,$(REPORELEASE))
+  REPORELEASE := $(shell git svn info 2>/dev/null | grep "Revision: " | sed -e s'/^[^0-9]*\([0-9]*\).*$$/\1/')
+endif
+ifeq (,$(REPORELEASE))
+  $(error You much check the code out from svn using svn or git)
+endif
+
+DEBRELEASE := 0tmi$(REPORELEASE)
+DEBVER := $(PKGVER)-$(DEBRELEASE)
+RFC822DATE := $(shell date --rfc-822)
+ROOTNAME := cp210x
+PACKAGE := $(ROOTNAME)-module-$(KVER)
+TARFILE := $(PACKAGE)_$(DEBVER).orig.tar.gz
+DEBSRC := $(PACKAGE)-$(PKGVER)
+ARCH := $(shell dpkg-architecture -qDEB_HOST_ARCH)
+DEBFILE := $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).deb
+DEBSRCFILE := $(BUILD)/$(PACKAGE)_$(DEBVER).dsc
+
+
+source: $(DEBSRCFILE)
+$(DEBSRCFILE): $(BUILD)/debian-stamp
+       cd $(BUILD) && dpkg-source -b $(DEBSRC)
+       touch $@
+
+
+binary: $(DEBFILE)
+$(DEBFILE): $(BUILD)/debian-stamp
+       cd $(BUILD)/$(DEBSRC) && dpkg-buildpackage -sa -us -uc 
+
+
+$(BUILD)/src-stamp: $(wildcard src/*)
+       mkdir -p $(BUILD)
+       rm -rf $(BUILD)/$(DEBSRC)
+       cp -a src $(BUILD)/$(DEBSRC)
+       find $(BUILD)/$(DEBSRC) -name .svn -type d -exec rm -rf "{}" ";" 2>/dev/null || exit 0
+       rm -rf $(BUILD)/$(DEBSRC)/.git || exit 0
+       tar -C $(BUILD) -czf $(BUILD)/$(TARFILE) $(DEBSRC)
+       touch $@
+
+
+configure: $(BUILD)/debian-stamp
+$(BUILD)/debian-stamp: $(BUILD)/src-stamp $(wildcard debian.in/*)
+       mkdir -p $(BUILD)/$(DEBSRC)/debian
+       rsync --quiet -avz --exclude=.svn/ --exclude=.git/ debian.in/ $(BUILD)/$(DEBSRC)/debian/
+       perl -i -pe 's/xxPACKAGExx/$(PACKAGE)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxROOTNAMExx/$(ROOTNAME)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxPKGVERxx/$(PKGVER)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxKVERxx/$(KVER)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxKSRCVERxx/$(KSRCVER)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxDEBVERxx/$(DEBVER)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxDEBDISTxx/$(DEBDIST)/g' $(BUILD)/$(DEBSRC)/debian/*
+       perl -i -pe 's/xxRFC822DATExx/$(RFC822DATE)/g' $(BUILD)/$(DEBSRC)/debian/*
+       touch $@
+
+
+clean:
+       rm -rf $(BUILD)
+
+
+debug:
+       @echo "BUILD = $(BUILD)"
+       @echo "KVER = $(KVER)"
+       @echo "PKGVER = $(PKGVER)"
+       @echo "REPORELEASE = |$(REPORELEASE)|"
+       @echo "DEBRELEASE = $(DEBRELEASE)"
+       @echo "DEBVER = $(DEBVER)"
+       @echo "RFC822DATE = $(RFC822DATE)"
+       @echo "PACKAGE = $(PACKAGE)"
+       @echo "TARFILE = $(TARFILE)"
+       @echo "DEBSRC = $(DEBSRC)"
+       @echo "ARCH = $(ARCH)"
+       @echo "DEBFILE = $(BUILD)/$(PACKAGE)_$(DEBVER)_$(ARCH).deb"
+       @echo "DEBSRCFILE = $(BUILD)/$(PACKAGE)_$(DEBVER).dsc"
+
+
+.PHONY: clean binary source configure

diff --git a/dkms.conf b/dkms.conf
new file mode 100644 (file)
index 0000000..9593aa5
--- /dev/null
+++ b/dkms.conf
@@ -0,0 +1,7 @@
+PACKAGE_VERSION="0.11-0tmi81"
+PACKAGE_NAME="cp210x-module"
+CLEAN="make clean"
+BUILT_MODULE_NAME[0]=cp210x
+DEST_MODULE_LOCATION[0]="/kernel/drivers/usb/serial/"
+MAKE[0]="make all KVER=$kernelver"
+AUTOINSTALL="yes"